git.libre-soc.org Git - buildroot.git/log

pyrex: new package

Pyrex is a language that allows you to mix python and C code in a
single .pyx description file. This file is then rendered into C
code by the pyrexc host tool. That C file then can be used within
an application build or as part of the normal distutils build
process used to build a Python extension module.

Signed-off-by: Matt Weber <mlweber1@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dnsmasq: bump to version 2.69

Now with DNSSEC support.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

barebox: bump to version 2014.04.0

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

flac: bump to version 1.3.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

kmod: bump version

And add optional support for the python bindings.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libfslcodec: needs a (e)glibc based toolchain

The package contains prebuilt binaries linked against glibc.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

zeromq: bump to version 4.0.1

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

expect: new package 5.45

Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

liblogging: Depend on systemd

This package depends on systemd because in the configure phase it
searches for a file installed by systemd. We add systemd to it's
dependencies to ensure that is built before this package.

Fixes:
http://autobuild.buildroot.net/results/32c/32c636020600aa3f378d326c84fac82eb1fb2871/

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mongrel2: bump to version 1.9.0

The github helper does not retrieve a suitable tarball including the polarssl source code,
thus the change on the download url.

This version of mongrel2 should be compliant with latest ZeroMQ versions.

Signed-off-by: Lionel Orry <lionel.orry@gmail.com>
Tested-by: Jerzy Grzegorek <jerzy.grzegorek at trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

luajit: Disable for MIPS architecture with soft-float

Currently luajit is not supported on MIPS soft-float userlands. Upstream
plans to support it in the future:

http://wiki.luajit.org/Open-Sponsorships#MIPS-Soft-Float-and-Dual-Number-Port

Fixes:

http://autobuild.buildroot.net/results/d52/d5232a215e9e9aeb40b2e4e353329a27603c79ab/

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

erlang: bump version to 17.0

Erlang/OTP 17.0 is a new major release with new features, characteristics
improvements, as well as some minor incompatibilities.

Some highlights of the release are:
  - Erlang/OTP has been ported to the realtime operating system OSE.
  - Maps, a new dictionary data type (experimental)
  - A more natural mapping from ASN.1 OCTET STRING and BIT STRING to Erlang
    types, and other ASN.1 improvements and optimizations
  - The {active, N} socket option for TCP, UDP, and SCTP
  - A new (optional) scheduler utilization balancing mechanism
  - Migration of memory carriers has been enabled by default on all ERTS
    internal memory allocators
  - Increased garbage collection tenure rate
  - Experimental "dirty schedulers" functionality
  - Funs can now be given names
  - Miscellaneous unicode support enhancements
  - A new version scheme for OTP its applications has been introduced

Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xserver: remove patch for aarch64

xorg-server-1.15.0.tar.gz already has full support of aarch64.
It was added with this commit http://patchwork.freedesktop.org/patch/14361/

Even though the patch in question doesn't break patching or building of xserver
it duplicates aarch64 entries in "include/servermd.h".

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gd: fix static build with threads

Fixes:
http://autobuild.buildroot.net/results/4b4/4b4272876385cc21dd06ee946d658b8f9e225d78/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ext-toolchain-wrapper: fix typo

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mtd: Add ubiblock tool

The new release adds a new userspace tool called ubiblock. This is
used to control UBI's new block device feature which will be added
in Linux v3.15.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mtd: bump to version 1.5.1

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libyaml: security bump to version 0.1.6

Fixes CVE-2014-2525.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ulogd: bump to version 2.0.4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

stunnel: bump to version 5.01

Fixes CVE-2014-0016.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

jpeg-turbo: bump version

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.{2,12}.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/check-kernel-headers: fix old custom toolchains without -print-sysroot

Old toolchains, with old gcc that do not support -print-sysroot, break the
kernel-headers version check script: it fails to find the sysroot of the
toolchain, and thus ends up including the host's linux/version.h.

Most of the time, this will break early, since the host's kernel headers
will not match the toolchain settings.

But it can happen that the check is succesful, although the configuration
of the toolchain is wrong:

  - the custom toolchain has kernel headers vX.Y
  - the user selected vX.Z  (Z!=Y)
  - the host has headers vX.Y

In this case, the check passes OK, but the build of some packages later on
will break (which is exactly what those _AT_LEAST_XXX options were added to
avoid).

Fix that by passing the sysroot to the check script, instead of the cross
compiler.

We get the sysroot as thus:

  - for custom toolchains, we use the macro toolchain_find_sysroot. We can
    do that, because we already have a complete sysroot with libc.a at that
    time.

  - for internal toolchain using a custom kernel headers version, we just
    use $(STAGING_DIR). We can't use the macro as for custom toolchains
    above, because at the time we install the kernel headers, we do not yet
    have a complete sysroot with a libc.a.  But we can just use
    $(STAGING_DIR), since we're only interested in the kernel headers.

For all other types of toolchains, we already have the _AT_LEAST_XXX options
properly set, so we need not add a check in this case.

Fixes:
    http://autobuild.buildroot.net/results/f33/f331a6eff0b0b93c73af52db3a6b43e4e598577e/
    http://autobuild.buildroot.net/results/a57/a5797c025bec50c10efdcff74945aab4021d05e4/
    [...]

[Thanks to Thomas for pointing out the toolchain_find_sysroot macro!]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tcl: bump to version 8.6.1

Turn off building compatibility layers for old/broken versions of
standard functions (strstr, strtoul, strtod) with the assumption that
anything buildroot is using as a standard C library will be good enough
to not have broken behavior.

Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

cppcms: icu support needs wchar + threads

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/webkit: threads are also needed for icu

Add icu to the comment-list of packages requiring threads.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/php: intl support needs icu, which needs threads

Fixes:
http://autobuild.buildroot.net/results/156/1567be445b3ab9071717e9e72301818f95d0a143/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

system: allow setting the local timezone for uClibc

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tz: new package

uClibc can not use timezone info from tzdata as-is, but accepts setting
the local timezone in /etc/TZ.

[Peter: strip quotes/use local TZ_LOCALTIME variable]
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[yann.morin.1998@free.fr: make it a blind package; little tweak to help text]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tzdump: new host package

tzdump takes timezone info in the installed tzdata format, and
outputs timezone info parseable by uClibc.

[Peter: adjust host-zip dep, simplify build/install, use INSTALL variable]
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[yann.morin.1998@free.fr: split zic header-install to its own cset]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tzdata: allow host build

uClibc uses its own format for timezone info. OTOH, we can generate
uClibc-compatible timezone info from existing tzdata.

Add a host-version of tzdata, so we can harvest its installed timezone
info.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

system: add selection of a default localtime

[Peter: strip quotes/use local TZDATA_LOCALTIME variable]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[alexandre.belloni: move from "tzdata" to "system configuration"]
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[yann.morin.1998@free.fr: move into the BR2_TARGET_TZ_INFO conditionnal block]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

system: make the zoneinfo list a system option

[Peter: move legacy options under 2014.05]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

cppcms: fix build with uClibc

This patch modifies the cppcms package in order to support uClibc-based
toolchains.

The booster library by default compiles with the posix backend under
Linux, but this needs monetary.h which isn't provided by uClibc, so
work around that with the help of the DISABLE_POSIX_LOCALE configure
option.

Signed-off-by: Lucile Quirion <lucile.quirion@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gnutls: bump to version 3.2.13

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

util-linux: add missing dependency on libcap-ng

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

util-linux: add a check for mkostemp()

mkostemp() is missing with older version of uClibc (uClibc <= 0.9.33).
So, we need to check if mkostemp() is available.
If not, we use a wrapper function based on mkstemp() to implement it.

Since util-linux v2.23, mkostemp() is called with O_CLOEXEC flag.
If we use a define to mkstemp() to implement mkostemp(), flags will be
discared.
mkstemp() will pass O_RDWR|O_CREAT|O_EXCL, but not O_CLOEXEC, which
means that the file descriptor will no longer be closed automatically
upon exec().

To avoid to discard the flags, we add a call to fcntl() to set O_CLOEXEC
flag just after mkstemp().

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libsoup: fix build with host python3

Apply upstream patch to make tld-parser.py python3 compatible.

Fixes:
http://autobuild.buildroot.net/results/d22/d22edc19001037f9593f45444ed953f74ee6b806/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libuci: bump version and remove obsolete patch

The uci-fix-Lua-finding.patch was upstreamed, so remove it.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

taglib: needs wchar

Fixes http://autobuild.buildroot.net/results/02a/02a6874aa21041ac9fef6fef51410c2ad92881c4/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openssl: bump to version 1.0.1g

Fixes highly critical CVE-2014-0160. See http://heartbleed.com .

Drop patch applied upstream.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

agentpp: new package

[Peter: add threads dependency, style fixes]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

snmppp: add option to disable SNMPv3 support

Disabling SNMPv3 support also removes the dependency on OpenSSL, which is
pretty large (over 2 MB of uncompressed filesystem size on an ARM926 platform).

BR2_PACKAGE_SNMPPP_SNMPV3 defaults to yes for backward compatibility with
previous Buildroot releases, where SNMPv3 was always enabled.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

snmppp: add option to enable logging

SNMP++ logging can be overly verbose, and according to the SNMP++
documentation, disabling logging "increases performance drastically and
minimizes memory consumption".

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

snmppp: update download URL

The filename of the SNMP++ sources has changed.
The old one is still working because the server automatically redirects to the
new file, but it is safer to use the official name.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

snmppp: fix missing includes

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libuci: Disable lua binding on no mmu

Same error as in libubox package.
http://autobuild.buildroot.net/results/1a5/1a5c50f8ca0ae70c1e0d3733765f521790b97a30/build-end.log

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libubox: Disable lua binding on no mmu

The Lua binding option of libubox need to be
explicitly disabled on no mmu case.

Fixes:
http://autobuild.buildroot.net/results/1a5/1a5c50f8ca0ae70c1e0d3733765f521790b97a30/build-end.log

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/exim: uses fork(), needs an MMU

Fixes:
http://autobuild.buildroot.net/results/95d/95ddd8e9be96f3808612db02642d72cfe77b3c26/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Romain Naour<romain.naour@openwide.fr>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

harfbuzz: fix static linking of test programs when toolchain has threads support

Fixes http://autobuild.buildroot.net/results/701/701a1a260a58a81f45b3b9eae7eb47b400e05b37/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Don't build host-xz needlessly

Since commit d1f325f554cab (xzcat: treat as host prerequisite and build if
needed) host-xz is always built when the host does not have xz installed.
Removed all other host-xz dependencies.

[Peter: don't drop for host-squashfs, as that needs libxz development files]
Cc: Thomas De Schampheleire <patrickdepinguin+buildroot@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

external toolchain: add 3.14 choice for kernel headers

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libunwind: needs set/getcontext, which only got added to uClibc post-0.9.33

Fixes http://autobuild.buildroot.net/results/3e8/3e8670ab1454118baf1e4a5ca632d45963ba3781/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

weston: add optional libunwind support

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xserver_xorg-server: add optional libunwind support

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lttng-libust: Disable liblttng-ust-dl with uClibc.

According to uClibc commit [1], dlinfo is not available.
To be able to use LTTng UST with uClibc, we need to disable
the Dynamic Linker Tracing functionality [2].

Fixes:
http://autobuild.buildroot.net/results/a6c/a6c33dd7ec2a36a50c5ea74b989a371d6c85e899/build-end.log

[1] http://git.uclibc.org/uClibc/commit/?id=f3c9dc499c5c787ddd8c4320f2d44d2ae6e40c22
[2] http://lists.lttng.org/pipermail/lttng-dev/2014-February/022423.html

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/eudev: use new upstream patch to fix fcntl issue

This is upstream's third attempt at fixing the issue.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/check-kernel-headers: use mktemp instead of hand-crafted temp file

Instead of creating a temporary files with a dubious scheme, use mktemp,
which purpose is exactly that: creating temporary files

Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fmtools: Switch to 2.x series

Specifically, bump version to 2.0.1.
The 2.x series uses the V4L2 API instead of V4L.

Signed-Off-By: Maarten ter Huurne <maarten@treewalker.org>
Acked-By: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst-fsl-plugins: Refresh one patch to fix build

This fixes the following patch application error when building for i.MX6:

  Applying gst-fsl-plugins-0004-Fix-libgstfsl-linkage-add-lrt-for-shared-memory-func.patch using patch:
  patching file configure.ac
  Hunk #1 succeeded at 178 with fuzz 2 (offset 5 lines).
  patching file libs/Makefile.am
  Hunk #1 FAILED at 12.
  1 out of 1 hunk FAILED -- saving rejects to file libs/Makefile.am.rej
  Patch failed!  Please fix gst-fsl-plugins-0004-Fix-libgstfsl-linkage-add-lrt-for-shared-memory-func.patch!

Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pkg-download: update the github helper

Once again, github updates the source download url.
Even if only the zip archive link is advertised on the repositories'
page, the *.tar.gz is still available.

It is worthy to note that the tarball's content differs depending if
it has been fetched from the former and the new url (the root directory
name changes).

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain: print actual version of kernel headers when checking

Since we introduced the _AT_LEAST_XXX for the kernel headers, people
using pre-built custom toolchain now have to specify the version of
the kernel headers their custom toolchain uses.

So, when we detect that there is a mismatch between the selection in
the menuconfig, and the actual version of the headers, we currently
only bail out with a terse message "Incorrect selection of kernel
headers".

This could be confusing some, and getting the version of the headers
used by the toolchain is not trivial (well, it's very easy, but not
trivial.)

This patch changes the way we report the error by moving the message
into the test-code, and by printing the expected and actual versions
of the kernel headers.

BUT! To get this pretty error message, we need to run the
test-program, so we can not use the cross-toolchain, we have to use
the native one.

BUT! The native one has its own linux/version.h header, so we can not
simply include it.

So, we ask the cross-compiler where its default sysroot is, and use
that to then force-feed the cross linux/version.h to the native
toolchain.

[Thomas: augment commit log with a message provided by Yann, fix
coding style to not have spaces after opening parenthesis and before
closing parenthesis, reformatted the message "Incorrect selection..."
to make it fit on one line.]

Reported-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain: control vendor part in GNU_TARGET_NAME

This option allows to customize the "vendor" part of the
toolchain tuple, where the toolchain tuple has the form
<arch>-<vendor>-<os>-<libc>. Use this option in situations
where gcc might make different decisions based on the vendor
part of the tuple.

[Thomas: move the config option in a slightly different place, so that
it does not appear between the C library selection and the C library
options.]

Signed-off-by: "Noam Camus" <noamc@ezchip.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: unshare: include libmount.h to provide missing MS_* defines

upstream patch: d754315c54af9cb8222e0a04ed5b2b4b927ed176

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libevdev: adjust host-python dependency

libevdev depends on host-python because of some of its build scripts.
These build scripts support python2 and python3.

When python3 is part of the target selection, then we can just use the
interpreter provided by the host-python3 package.

Fixes:
http://autobuild.buildroot.net/results/dd0/dd04833b11a0ebb0193c861cb375b2112dd339d1/

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nut: needs mmu

While investigating on build failure [1], I realized that nut needs mmu since fork() is used.
So, conditions of this build failure are no longer encountered.

[1] http://autobuild.buildroot.net/results/961/96193e18782697c2af8813a7714b66b4ba1f3d1c//build-end.log

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

exim: move to "Mail" menu

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python: fix host-python symlink installation when no python is selected

When no python interpreter is selected, all host-python symlink
installation were disabled.
This could lead to a non-existing $(HOST_DIR)/usr/bin/python program.

Fixes:
http://autobuild.buildroot.net/results/6e7/6e74a343b4e8e113fd34d45c9279419e233afe8a/

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libuci: fix Lua finding

This patch fixes Lua path comparison, if Lua is not provided.

Fixes

http://autobuild.buildroot.org/results/a14/a140e9ea33202e8b870ec047a573f269e9a74b08/

[Thomas: add reference to the autobuilder failure.]

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

virtual-package: fake a version string for virtual packages

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/udev: convert to the virtual-package infrastructure

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Mike Zick <minimod@morethan.org>
[eric.le.bihan.dev@free.fr: tested with both systemd and eudev, on QEMU x86]
Tested-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/cryptodev: convert to the virtual-package infrastructure

Since this package is implemented via a choice rather than the usual
separate-package providers, we only need BR2_PACKAGE_HAS_CRYPTODEV
to be always defined when the 'cryptodev' package is selected.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Mike Zick <minimod@morethan.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/jpeg: convert to the virtual-package infrastructure

Since this package is implemented via a choice rather than the usual
separate-package providers, we only need BR2_PACKAGE_HAS_JPEG to be
always defined when the 'jpeg' package is selected.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Mike Zick <minimod@morethan.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/luainterpreter: convert to the virtual-package infrastructure

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Mike Zick <minimod@morethan.org>
Cc: Francois Perrad <fperrad@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libopenvg: convert to the virtual-package infrastructure

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Mike Zick <minimod@morethan.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libopenmax: convert to the virtual-package infrastructure

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Mike Zick <minimod@morethan.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libegl: convert to the virtual-package infrastructure

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Mike Zick <minimod@morethan.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
[eric.le.bihan.dev@free.fr: tested on RPi, with Qt5]
Tested-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libgles: convert to the virtual-package infrastructure

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Mike Zick <minimod@morethan.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
[eric.le.bihan.dev@free.fr: tested on RPi, with Qt5]
Tested-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/powervr: convert to the virtual-package infrastructure

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Mike Zick <minimod@morethan.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual: add notes about depending on a virtual package

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual: update the virtual package section with the new infrastructure

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

packages: add infrastructure for virtual packages

The virtual-package infrastructure allows to easily define a
virtual package in a single line:

$ cat package/some-virtual-package/some-virtual-package.mk
$(eval $(virtual-package))

And that's all. :-)

Thanks to Éric for his work on the manual, that prompted the
idea for this virtual-package infrastructure! ;-)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Mike Zick <minimod@morethan.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual: add virtual package tutorial

The manual now features a new section with instructions about how to add a
virtual package.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[yann.morin.1998@free.fr: move down statement about provider's .mk]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/lua: rename config options

Package's options should be named after the package.

Lua is an interpreter, but the package is named 'lua'. So we want to
name the config option with '_LUA_', not with '_LUA_INTERPRETER_'

Besides, naming them with '_LUA_INTERPRETER_' might be confusing, since
there is a package named 'luainterpreter'.

Since the renamed options are part of a choice, we can't use the legacy
options to select the new ones. So we instead instruct the user to go
select the appropriate option in the choice.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <fperrad@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/luainterpreter: rename the _HAS and _PROVIDES variables

The basic rule for a package is to have its options named
after the package name. There is no reason this should not
also be the case for virtual packages.

Besides, this will allow us to switch luainterpreter to use the
soon-to-be-introduced virtual-package infrastructure.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Mike Zick <minimod@morethan.org>
Cc: Francois Perrad <fperrad@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libopenvg: rename the _HAS and _PROVIDES variables

The basic rule for a package is to have its options named
after the package name. There is no reason this should not
also be the case for virtual packages.

Besides, renaming the package will allow us to switch libopenvg to use
the soon-to-be-introduced virtual-package infrastructure.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Mike Zick <minimod@morethan.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Cc: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libopenmax: rename the _HAS and _PROVIDES variables

The basic rule for a package is to have its options named
after the package name. There is no reason this should not
also be the case for virtual packages.

Besides, this will allow us to switch libopenmax to use the
soon-to-be-introduced virtual-package infrastructure.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Mike Zick <minimod@morethan.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libegl: rename the _HAS and _PROVIDES variables

The basic rule for a package is to have its options named
after the package name. There is no reason this should not
also be the case for virtual packages.

Besides, this will allow us to switch libegl to use the
soon-to-be-introduced virtual-package infrastructure.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Mike Zick <minimod@morethan.org>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libgles: rename the _HAS and _PROVIDES variables

The basic rule for a package is to have its options named
after the package name. There is no reason this should not
also be the case for virtual packages.

Besides, this will allow us to switch libgles to use the
soon-to-be-introduced virtual-package infrastructure.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Mike Zick <minimod@morethan.org>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libuci: Lua binding needs mmu and version 5.1

The Lua binding option of libuci uses fork() so it needs the MMU.

Finally, libuci fails to build with Lua 5.2 because it uses functions
removed from this version. Fix it by activating the option only with
Lua 5.1.

[Thomas: use LIBUCI_ and not LIBUBOX_ otherwise the patch doesn't
work.]

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/mkusers: fix warnings when adding a new user

When adding a new user (or a new group), we would get warnings, like:
[...]/support/scripts/mkusers: line 145: [: too many arguments

This is because we're checking if a UID (or a GID) is already defined,
and/or is different from the requested one, both checks in the same
test.

Of course, if a UID (or a GID) is not defined, it does not have a value,
so we can not compare it to an integer.

Fix that by splitting the test in two, so the second is only executed if
the first is sucessful.

Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

binutils: drop *.texi* hunks from xtensa trampolines patches

Rebuilding as.info with makeinfo version 5.2 results in a build error,
even with pristine binutils source. Dropping hunks that change *.texi*
files avoids documentation rebuild.

Reported-by: Vincent Stehlé <vincent.stehle@freescale.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

exim: new package

[Thomas:
- use $(INSTALL) instead of install
- add AR and RANLIB variables in the local makefiles, so that the
   cross toolchain ar and ranlib utilities are used instead of the
   native ones.
- move the init script initialization to the EXIM_INSTALL_INIT_SYSV
   variable.
- Use parenthesis instead of curly braces to reference TARGET_DIR.]

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

system/skeleton: add mail group

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python3: fix the value of PYTHON3_PATH

The PYTHON3_PATH was incorrectly referencing the site-packages of
Python 2 packages, due to the usage of PYTHON_VERSION_MAJOR, instead
of PYTHON3_VERSION_MAJOR. This commit fixes that by using the correct
variable, which in our testing fixed the build of python-pyasn against
python3.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

crda: override python interperter

During its build, crda calls a python script importing m2crypto module
which requires python2 interpreter.

So, we have a build dependency against host-python.

Also, we make sure this python script is interpreted using the right
python interpreter; we add a patch allowing to enforce this and
explicitly set it.

Fixes:
http://autobuild.buildroot.net/results/a1e/a1e53d66d3962fd5431e7601937b071a0a3c2084/

[Thomas: fix typos in comments, some of them noticed by Yann.]

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>