radv/gfx9: fix primitive topology when adjacency is used

Found by inspection.

Cc: 17.3 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

glsl: disable vec3 packing/splitting in tfb separate mode

This fixes a varying packing issue when using transform feedback in
GL_SEPARATE_ATTRIBS mode.  By time we get to linking, we already
know that the number of feedback attributes is under the
GL_MAX_TRANSFORM_FEEDBACK_SEPARATE_ATTRIBS limit so packing isn't
as critical.  In fact, packing/splitting vec3 attributes can cause
trouble because splitting effectively creates another TFB output
which can exceed device limits.  So, disable vec3 packing when it's
not needed to avoid that issue.

Fixes the Piglit ext_transform_feedback-separate test on VMware
driver.

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

glsl: simply packing class comparison

Handle comparing the packing class using the same method as we do
for var->data.is_xfb_only

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

glsl: document varying_matches::assign_locations() params and return value

And change *components to components[] as a reminder that it's an array.

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

glsl: remove some continue statements

In some cases, I think loop code is easier to read without continue
statements.

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

glsl: use bitwise operators in varying_matches::compute_packing_class()

The mix of bitwise operators with * and + to compute the packing_class
values was a little weird.  Just use bitwise ops instead.

v2: add assertion to make sure interpolation bits fit without collision,
per Timothy.  Basically, rewrite function to be simpler.

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

glsl: simplify loop in varying_matches::assign_locations()

The use of break/continue was kind of weird/confusing.

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

glsl: minor simplification in assign_varying_locations()

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

glsl: make varying_matches::is_varying_packing_safe() const

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

glsl: trivial comment fixes in lower_packed_varyings.cpp

Reviewed by: Timothy Arceri <tarceri@itsqueeze.com>

docs: update 17.3 and 18.0 cycles for the release calendar

Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Juan A. Suarez Romero <jasuarez@igalia.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

spirv: Makefile.nir.am: include vtn_gather_types_c.py script in tarball dist

Fixes: bb1e6ff161c ("spirv: Add a prepass to set types on vtn_values")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>

st/dri: allow direct YUYV import

Push this format to the pipe driver unchanged.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>

spirv: consider bitsize when handling OpSwitch cases

When walking over all the cases in a OpSwitch, take in account the bitsize
of the literals to avoid getting wrong cases.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

drirc: set allow_glsl_cross_stage_interpolation_mismatch for more games

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Suggested-by: Darius Spitznagel <d.spitznagel@goodbytez.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104288
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

anv: disallow VK_REMAINING_ARRAY_LAYERS in vkCmdClearAttachments()

Vulkan spec doesn't specify that VK_REMAINING_ARRAY_LAYERS is allowed
in the passed VkClearRect struct.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nvc0/ir: change textureGrad to always use lane 0 as the tex origin

Thanks to Karol Herbst for the debugging / tracing work that led to this
change.

Move to using lane 0 as the "work" lane for the texture. It is unclear
why this helps, as that computation should be identical to doing it in
the "correct" lane with the properly adjusted quadops.

In order to be able to use the lane 0 result, we also have to ensure
that lane 0 contains the proper array/indirect/shadow values.

This applies to Fermi and Kepler. Maxwell+ may or may not need fixing,
but that lowering logic is separate.

Fixes KHR-GL45.texture_cube_map_array.sampling

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

broadcom/vc5: Add missing setting of the UIF XOR disable flag in textures.

Most piglit textures happened to work out by RGBW not changing in that
bit, but it did cause failures in RGBA16F fbo-generatemipmap-formats.

broadcom/vc5: Clean up the comment and code around level 0 UIF.

I wrote this early in driver development, and our UIF handling is much
better now.

broadcom/vc5: Simplify the tiling calculations.

The mb_tile_layout table was just the utile_w/h times two, so reuse the
utile code instead.

broadcom/vc5: Return the depth in all components of depth textures.

Apparently gallium's u_blitter wants depth from at least the .z component,
and other swizzling appears to apply on top of that.  Fixes
fbo-generatemipmap-formats failures with depth formats.

broadcom/vc5: Enable decompressing RGTC for desktop GL support.

This matches freedreno's behavior.

broadcom/vc5: Use u_transfer_helper for MSAA mappings.

broadcom/vc5: Start adding support for rendering to Z32F_S8X24_UINT.

There may be some more RCL work to be done (I think I need to split my Z/S
stores when doing separate stencil), but this gets piglit's "texwrap
GL_ARB_depth_buffer_float" working.

v2: Unwrap the z32f_wrapper before calling the helper, rather than having
    the helper have a callback.
v3: Rebase on Rob Clark's u_transfer_helper instead

freedreno: add debug flag to force high priority context

Mainly for testing, FD_MESA_DEBUG=hiprio will force high priority
contexts.

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno: context priority support

For devices (and kernels) which support different priority ringbuffers,
expose context priority support.

Signed-off-by: Rob Clark <robdclark@gmail.com>

gallium: plumb context priority through to driver

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Wladimir J. van der Laan <laanwj@gmail.com>

intel/compiler/gen10: Disable push constants.

We still have gpu hangs on Cannonlake when using push constants, so
disable them for now until we have a proper fix for these hangs.

v2: Add warning message when creating context too.

Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>

radv: properly load unused gl_LocalInvocationID/gl_WorkGroupID components

F1 2017 looks good now.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: do not add extra SGPR when push constants are not used

This is not because the vertex stage needs some push constants
that other stages need them too. This should reduce the number
of loaded SGPRs in some situations.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: change the needs_push_constants logic

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: store pipeline stages that need push constants

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: remove one useless check in ac_nir_shader_info_pass()

pipeline->layout can't be NULL now.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: remove one useless check in radv_flush_constants()

pipeline->layout can't be NULL now.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: add assertions to make sure pipeline layout objects are valid

The spec requires it.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: create pipeline layout objects for all meta operations

They are dummy objects but the spec requires layout to not be
NULL, this just makes sure we are creating valid pipeline layout
objects. This will allow us to remove some useless checks.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: Use a sort for rebuilding the sparse buffer bo list.

It uses slightly more memory (though still bounded by the number
of mapped ranges), but gives less quadratic behavior.

Cuts 4 minutes from the runtime of the CTS *.sparse.* tests.

Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

freedreno/ir3: handle VTXID_BASE for indirect draws

Need to do some gymnastics to copy the parameter from the indirect
parameters buffer to uniform so shader sees the correct base-vertex-id.

Fixes ./bin/arb_draw_indirect-vertexid on a5xx and probably a4xx too.

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno/ir3: add ctx->mem_to_mem()

For dealing with indirect-draw + gl_VertexID, we'll introduce another
case where we need to use CP_MEM_TO_MEM.  Rather than adding more
if(a5xx)/else make this a ctx vfunc.

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno/a5xx: use vertex_id_zero_base

Cmdstream traces from blob make it clear that the blob driver dev's
*think* a5xx has a real (non-zero-based) vtxid.  But reality claims
differently.

Fixes ./bin/gl-3.2-basevertex-vertexid and probably others.

This means draw-indirect is going to need some gymnastics to copy
base-vertex into uniform.  (a4xx probably needs that too.)

Signed-off-by: Rob Clark <robdclark@gmail.com>

r600: clear compressed flags in image state on unbind.

If we aren't binding an image, clear the compressed flags.

This fixes a segfault seen with an apitrace.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104331
Signed-off-by: Dave Airlie <airlied@redhat.com>

swr: Account for index_bias in offsets

When calculating buffer offsets for client buffers account for info.index_bias.

Fixes the follow piglit tests:
arb_draw_elements_base_vertex-drawelements-user_varrays
arb_draw_elements_base_vertex-negative-index-user_varrays

Reviewed-By: Bruce Cherniak <bruce.cherniak@intel.com>

r600: only reported tgsi ir compute support on evergreen+

This fixes a crash on r600/r700.

Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: Advertise sync fd import and export.

Passes dEQP-VK.*.sync_fd.*

Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Implement sync file import/export for fences & semaphores.

Reviewed-by: Dave Airlie <airlied@redhat.com>

radv/amdgpu: wrap sync fd import/export.

Reviewed-by: Dave Airlie <airlied@redhat.com>

ac/nir: fix lds store for patch outputs.

This wasn't calculating the correct value, this along with
a nir patch fixes a regression in:
dEQP-VK.tessellation.shader_input_output.barrier

Fixes: 043d14db30a (ac/nir: don't write tcs outputs to LDS that aren't read back.)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

nir/linking: always set the used_across_stages/outputs_read bits

If we don't remap and output this code would trample the outputs
read bits.

This fixes a regression in
dEQP-VK.tessellation.shader_input_output.barrier

Fixes: 1c9c42d16b4c (nir: add varying component packing helpers)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

spirv: Relax the validation conditions of OpSelect

The Talos Principle contains shaders with an OpSelect between two
vectors where the condition is a scalar boolean.  This is technically
against the spec bout nir_builder gracefully handles it by splatting
out the condition to all the channels.  So long as the condition is a
boolean, just emit a warning instead of failing.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104246

radv: remove useless radv_cmask_info::base_address_reg

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

amd/common: add ac_vgt_gs_mode() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

amd/common: add ac_get_cb_shader_mask() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

Revert "radv: do not load unused gl_LocalInvocationID/gl_WorkGroupID components"

This reverts commit 2294d35b243dee15af15895e876a63b7d22e48cc.

We can't do this without adjusting the input SGPRs/VGPRs logic.
For now, just revert it. I will send a proper solution later.

It fixes a rendering issue in F1 2017 that CTS didn't catch up.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: port merge tess info from anv

anv merges the tess info correctly, but radv wasn't doing this.

This fixes hangs in
dEQP-VK.tessellation.winding.default_domain.hlsl_triangles_ccw

Fixes: 60fc0544e0 (radv/pipeline: handle tessellation shader compilation)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: Add external fence support.

Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Implement VK_KHR_external_fence_fd.

Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Implement fences based on syncobjs.

Reviewed-by: Dave Airlie <airlied@redhat.com>

amd/common: Add detection of the syncobj wait/signal/reset ioctls.

First amdgpu bump after inclusion was 20 (which was done for local BOs).

Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Add syncobj signal/reset/wait to winsys.

Reviewed-by: Dave Airlie <airlied@redhat.com>

configure/meson: Bump libdrm_amdgpu version requirement.

For the radv dependencies on syncobj signal/reset.

Reviewed-by: Dave Airlie <airlied@redhat.com>

android: fix vulkan driver build

fixes undefined references by adding missing wsi common API

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

android: fix undefined references to futex API

Fixes: f98a2768ca "mesa: Add new fast mtx_t mutex type for basic use cases"
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

docs: mark GL4.3 as finished for r600

Still only on fp64 supported hw.

r600: export robust buffer access

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600: export GLSL 430

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600/cs: add compute support to caps

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600: always flush between gfx and compute

This is in no way optimal, but there seems to be some problems
mixing at the moment, lots of hangs, it is possible, just need
to figure out more magic.

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600: fix unused variable warning

Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: Fix multi-layer blits.

We did not set the layer correctly for the dst, as we would keep
using the base layer. Same for the source image.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102710
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>

freedreno/a5xx: add a5xx blitter

FD_MESA_DEBUG=noblit to disable

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno: add generic blitter

Basically a clone of util_blitter_blit() but with special handling to
blit PIPE_BUFFER as a PIPE_TEXTURE_1D.

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno: add non-draw batches for compute/blit

Get rid of "gmem" (ie. tiling) ringbuffer, and just emit setup commands
directly to "draw" ringbuffer for compute (and in future for blits not
using the 3d pipe).  This way we can have a simple flat cmdstream buffer
and bypass setup related to 3d pipe.

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno: track staging and shadow perf ctrs for the HUD

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno: staging upload transfers

In the busy && !needs_flush case, we can support a DISCARD_RANGE upload
using a staging buffer.  This is a bit different from the case of mid-
batch uploads which require us to shadow the whole resource (because
later draws in an earlier tile happen before earlier draws in a later
tile).

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno: update generated headers

Signed-off-by: Rob Clark <robdclark@gmail.com>

anv: Remove unused variable.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

radeonsi: don't call force_dcc_off for buffers

This was undefined yet harmless behavior in LLVM.
Not anymore - it causes a hang now.

Cc: 17.3 <mesa-stable@lists.freedesktop.org>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>

isl: Don't require VALIGN_2 for R32G32B32_FLOAT on Haswell.

According to the RENDER_SURFACE_STATE internal documentation, the
R32G32B32_FLOAT restriction is marked "IVB" only.  We choose to apply
it to Ivybridge and Baytrail, but not Haswell.

Apparently fixes KHR-GL46.texture_size_promotion.functional on Haswell.

Changes these tests from crashing to skipping on Haswell:
- KHR-GL46.direct_state_access.textures_storage_multisample_2d_rgb32f
- KHR-GL46.direct_state_access.textures_storage_multisample_3d_rgb32f

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

radeon/uvd: add and manage render picture list

Create a list in decoder to store all render picture buffer pointers that
currently being used in reference picture lists.

During get message buffer call, check each pointer in render_pic_list[]
within given pic->ref[] list, remove pointer that no longer being used by
pic->ref[]. Then add current render surface pointer to the render_pic_list[]
and assign the associated index to result.curr_idx.

As a result, result.curr_idx will have the correct index to represent the
current render picture, instead of the previous increamenting values.

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

radeon/vcn: add and manage render picture list

Create a list in decoder to store all render picture buffer pointers that
currently being used in reference picture lists.

During get message buffer call, check each pointer in render_pic_list[]
within given pic->ref[] list, remove pointer that no longer being used by
pic->ref[]. Then add current render surface pointer to the render_pic_list[]
and assign the associated index to result.curr_idx.

As a result, result.curr_idx will have the correct index to represent the
current render picture, instead of the previous increamenting values.

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

vl: remove is idr flag

Remove is_idr flag since not being used anymore.

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/va: directly use idr pic flag

Remove is_idr flag, and use idr_pic_flag provided by vaapi directly

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

radeon/vce: determine idr by pic type

Vaapi encode interface provides idr frame flags, where omx interface doesn't.
Therefore, change to use picture type to determine idr frame, which will
work for both interfaces.

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>

radeon/vcn: determine idr by pic type

Vaapi encode interface provides idr frame flags, where omx interface doesn't.
Therefore, change to use picture type to determine idr frame, which will
work for both interfaces.

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

util: scons: wire up the sha1 test

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>

swr/rast: Move more RTAI handling out of binner

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: EXTRACT2 changed from vextract/vinsert to vshuffle

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Fix cache of API thread event manager

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Replace VPSRL with LSHR

Replace use of x86 intrinsic with general llvm IR instruction.

Generates the same final assembly.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Rework thread binding parameters for machine partitioning

Add BASE_NUMA_NODE, BASE_CORE, BASE_THREAD parameters to
SwrCreateContext.

Add optional SWR_API_THREADING_INFO parameter to SwrCreateContext to
control reservation of API threads.

Add SwrBindApiThread() function to allow binding of API threads to
reserved HW threads.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Pull of RTAI gather & offset out of clip/bin code

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Remove no-op VBROADCAST of vID

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: SIMD16 Fetch - Fully widen 32-bit integer vertex components

Also widen the 16-bit a 8-bit integer vertex component gathers to SIMD16.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Replace INSERT2 vextract/vinsert with JOIN2 vshuffle

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: SIMD16 Fetch - Fully widen 16-bit float vertex components

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: SIMD16 Fetch - Fully widen 32-bit float vertex components

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Pass prim to ClipSimd

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Pull most of the VPAI manipulation out of the binner/clipper

Move out of binner/clipper; hand them down from the frontend code instead.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Move GatherScissors to header

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Rewrite Shuffle8bpcGatherd using shuffle

Ease future code maintenance, prepare for folding simd8 and simd16 versions.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>