mplayer: bump to version 1.2

- Bump to version 1.2
- Update hash file.
- Remove no longer existent configure options:
  --disable-dvdread-internal, --disable-tremor-internal.
- Tweak 0001-disable-install-strip.patch.
- Remove 0002-fix-cc-parsing.patch. Upstreamed:
  https://github.com/pigoz/mplayer-svn/commit/0f3ddfe146b8b2c6fe9302017375ef6b30ffbe71
- Remove 0004-add-arc-support.patch. Upstreamed:
  https://github.com/pigoz/mplayer-svn/commit/3b8c5f22313a416b24dcc4e7facde0a886352a75
- Remove 0005-Support-newer-GIFLIB-versions.patch. Upstreamed:
  https://github.com/pigoz/mplayer-svn/commit/a0ddaef5457e222dade386901bf448c5e3ac7b89
- Remove 0006-Support-newer-GIFLIB-versions-part2.patch. Upstreamed:
  https://github.com/pigoz/mplayer-svn/commit/a43d259602723d92db1463b166739fb8d22c2d51
- Remove 0007-mplayer-enable-aarch64.patch. Upstreamed:
  https://github.com/pigoz/mplayer-svn/commit/1cceebf1fa0cc1b27429e937f1cfa61c406f9159
- Rename 0003-mpdemux-live555-async-interface.patch to
  0002-mpdemux-live555-async-interface.patch.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

git: bump to version 2.6.1

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

glib-networking: bump to version 2.46.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libglib2: bump to version 2.46.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dbus-cpp: not available on musl

Fixes:
http://autobuild.buildroot.net/results/9b2/9b29ff3aac5cd543dbe2a1a632b61e27ca25085e/
http://autobuild.buildroot.net/results/304/3041ed6d7ff648f805cf2e29762e2b57cd0540e4/

musl doesn't provide the initializer for recursive pthread mutexes.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wandboard_defconfig: bump u-boot to 2015.07 and kernel to 3.14.28_1.0.0

Bump U-boot version to 2015.07 from the mainline repository. Since there
is SPL support for the wandboard in the U-boot 2015.07, it is now
possible to boot the same U-boot image for all wandboard variants
(solo/dual/quad).

Bump kernel version to 3.14.28_1.0.0 from the wandboard git repository.

Tested on Wandboard Solo, Wandboard Dual and Wandboard Quad.

Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

glib-networking: specify GIO_MODULE_DIR for target

Since the upgrade to pkgconf 0.9.12 all directories and variables with
directories are sysroot-prefixed, whereas with the old patch only some
variables were (includedir, mapdir, sdkdir, libdir).

libglib2 uses a giomoduledir=${libdir}/gio/modules variable in
gio-2.0.pc, which when expanded via sysroot by pkgconf at configure time
points to the staging directory (via libdir expansion).
When target install gets called the gio module gets installed to staging
rather than target, with the obvious consequences this has.

Work-around this pkgconfig abuse by overriding GIO_MODULE_DIR at target
install time.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdk-pixbuf: security bump to version 2.32.1

CVE-2015-4491 already fixed in the release so drop patch.

Fixes a heap overflow with a gif file and a heap overflow and DoS with a
tga file. CVEs not assigned yet.

Tests disabled since they fail to build properly on uClibc toolchains.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-numpy: uClibc patch to avoid ldexpl and frexpl

It turns out that uClibc only enables the long double math functions
for some architectures (god know why, so what if long double is the
same as double, these functions should still be defined). Since
python-numpy links with those functions, the module will fail to load
on ARM, MIPS and SH.

However, python-numpy actually checks for each function if it is really
available. Only, it overrides that check for ldexpl and frexpl when
long double is the same as double (i.e. in exactly the case the uClibc
doesn't have these functions).

So add another exception for this.

Upstream-status: not applicable (code has changed too much)

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fs/romfs: remove redunant ROMFS_TARGET definition

Probably a leftover from our last fs infra reworking a couple of years
ago.

Incidentally, also added a newline at the end of the file.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkgconf: bump to version 0.9.12

Drop patches, they aren't required any more.
It fixes a bug where inline comments cause issues, like:

Libs: -lblah # -lbleh

...it would make pkgconf search for the '#' package

This is required for the nettle 3.1.1 upgrade since howgeed.pc adjusts
Libs according to static/dynamic builds using the comment feature.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gcc: backport xtensa libgcc stack unwinding fixes

These backported patches fix the following failing uClibc-ng tests:
  nptl/tst-cancelx4,
  nptl/tst-cancelx16,
  nptl/tst-cancelx18,
  nptl/tst-cancelx20,
  nptl/tst-cancelx21,
  nptl/tst-cleanupx1,
  nptl/tst-cleanupx3,
  nptl/tst-oncex3,
  nptl/tst-oncex4.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nettle: bump to version 3.1.1

API is now compatible with nettle 2.7.x

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wireless-regdb: bump to version 2015.09.25

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

arm_foundationv8_defconfig: rely on default Image name for kernel

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qemu_aarch64_virt_defconfig: rely on default Image name for kernel

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: add 'Image' as the image name for aarch64

On aarch64, the image name is always Image, so let's add support for
that.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

microzed: u-boot needs host-dtc

defconfigs that use U-Boot 2015.07 need host-dtc to build
properly.

Signed-off-by: Davide Viti <d.viti@infosolution.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libtorrent: zlib is mandatory

zlib isn't optional even though it seems like it, fixes build failure
such as:

log.cc:51:18: fatal error: zlib.h: No such file or directory

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rtorrent: drop sigc dep & switch homepage

libsigc isn't used/needed any longer so drop it.
And switch to the proper homepage rather than the tarball repository.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libtorrent: drop sigc dep & switch homepage

libsigc isn't used/needed any longer so drop it.
And switch to the proper homepage rather than the tarball repository.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain-wrapper.c: unbreak BR_CROSS_PATH_ABS handling

Fixes #8386

We should check if BR_CROSS_PATH_ABS is defined, not if it evalutates to
true for the pre processor.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rtorrent: bump to version 0.9.6

- Bump to version 0.9.6

- Add a hash file.

- Change the website URL to the new official one.

- Tweak the 0001-cross_compile.patch for the new version.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libtorrent: bump to version 0.13.6

- Bump to version 0.13.6.

- Add a hash file.

- Change the website URL to the new official one.

- Help the build system to find the zlib headers, otherwise the
  configure script will fail like this:

    checking if zlib is wanted... yes
    checking for inflateEnd in -lz... no
    checking zlib.h usability... no
    checking zlib.h presence... no
    checking for zlib.h... no
    configure: error: either specify a valid zlib installation with
    --with-zlib=DIR or disable zlib usage with --without-zlib

- Disable instrumentation support by default since it avoids runtime
  failures on rtorrent for some architectures like MIPS, PowerPC or ARM:

    https://github.com/rakshasa/rtorrent/issues/156

- Tweak the 0001-cross_compile.patch for this new version.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.18.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc: sort the patches before they are hashed

$(wildcard ...) in make doesn't sort the files, so the order of the
hashed files is not predictable. Therefore, the ccache hash could
change from one build to another. We don't want that, so sort the
files explicitly.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs: fix configurations that need host-dtc

olimex_a20_olinuxino_lime_defconfig and zedboard_defconfig use U-Boot
2015.07, and they need host-dtc to build properly.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

u-boot: add an option to indicate that DTC is needed

Some U-Boot configurations require the Device Tree compiler to be
available, so we need to depend on host-dtc (example configuration:
zynq_zed).

However, we don't want to build it unconditionally, since the vast
majority of U-Boot configurations don't need it (and host-dtc itself
has a bunch of dependencies).

So, we simply add a Config.in option that allows users to indicate
whether their U-Boot needs DTC or not, and depend on host-dtc if this
option is enabled.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dtc: add host build

Having a host variant of dtc is needed for example for U-Boot, which
uses the Device Tree for a number of platforms.

In addition, now that we have a proper host-dtc package, it is no
longer needed for the linux package to install the host dtc compiler:
users interested in having the host dtc compiler can simply enable
this package.

A Config.in.host option is added to build host-dtc, because the
initial reason why the host DTC built by the kernel was installed in
$(HOST_DIR)/usr/bin (commit 707d44d0a28906ebda49584dd5f55985406f0bde
from Thomas DS) was:

    Having dtc as a host tool can be useful for users that have a
    custom boot scenario where the device tree is not embedded in the
    kernel.

[Thomas:
  - rework the commit log.]
[Peter: keep the (renamed) linux version]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: install dtc binary as linux-dtc

So it doesn't conflict with host-dtc. The Linux kernel version may be a
patched version supporting E.G. overlays.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

portaudio: fix dependency on alsa-lib

BR2_PACKAGE_PORTAUDIO_ALSA is misspelled in one place, resulting in
alsa-lib not being listed in the dependencies.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

webkitgtk24: fix compilation failure due to unicode quotes

As reported in this upstream bug...

https://bugs.webkit.org/show_bug.cgi?id=128971

...the pretty unicode double quotes break Python stdin. Backporting the
patch that was attached to that bug report and tweak it minimally to
make it apply on Buildroot.

Fixes:

  http://autobuild.buildroot.net/results/c8e/c8ea1cab0a1ee081f9bca994ff5309ea0117d692/

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain/external: commonalise comments about Linaro toolchains

Those two comments:
  - are exactly the same
  - have the same dependencies (except for arm/armeb)

So, make it a common comment. It will be useful to have that comment
when we introduce new Linaro toolchain versions.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: update tool select options

Add missing app config options:
  - line
  - tunelp

Drop app config options no longer supported by util-linux:
  - arch
  - ddate

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

parted: add patch to fix musl build

Fixes:

  http://autobuild.buildroot.org/results/e1b/e1b6de7b234f2ec154d772ee93e33275dff38f3e/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: fix build of calao_qil_a9260_defconfig

The Barebox, AT91Bootstrap and Linux patches for the Calao QIL A9260
board are all located in the same directory, board/calao/qil-a9260/,
with only a prefix to indicate to which component they apply.

Unfortunately, since commit 0eba4759fab9d093afacac77a0ac31f1f0b3cceb
("packages: apply custom patches using *.patch instead of
<pkg>-*.patch"), the logic to apply custom patches in Barebox and
AT91Bootstrap has been changed from applying <package>-*.patch to
applying *.patch (in order to be consistent with what we do for all
packages in Buildroot).

However, this had the effect of trying to apply both the AT91Bootstrap
and Barebox patches on both packages, which obviously cannot work.

This commit fixes that by moving patches around, and switching to use
BR2_GLOBAL_PATCH_DIR for all of Barebox, AT91Bootstrap and Linux
patches.

In addition, the defconfig was not specifying explicitly which Barebox
version to use, so right now it's trying to use Barebox 2015.09, on
which the board-specific patch does not apply. So we've forced to use
Barebox 2012.08, which was the lastest release available at the time
the defconfig was initially contributed.

Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs: fix build of calao_usb_a9g20_lpw_defconfig

Both the Barebox and AT91Bootstrap patches for the Calao USB A9G20
board are located in the same directory, board/calao/usb-a9g20-lpw/,
with only a prefix making a difference between whether they apply to
Barebox or AT91Bootstrap.

Unfortunately, since commit 0eba4759fab9d093afacac77a0ac31f1f0b3cceb
("packages: apply custom patches using *.patch instead of
<pkg>-*.patch"), the logic to apply custom patches in Barebox and
AT91Bootstrap has been changed from applying <package>-*.patch to
applying *.patch (in order to be consistent with what we do for all
packages in Buildroot).

However, this had the effect of trying to apply both the AT91Bootstrap
and Barebox patches on both packages, which obviously cannot work.

This commit fixes that by moving patches around, and switching to use
BR2_GLOBAL_PATCH_DIR.

Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs: remove gnublin_defconfig

This defconfig tries to fetch its kernel source code and U-Boot source
code from gitorious.org, which is not longer available. Therefore,
this defconfig has been failing to build since quite some time. Since
there's no obvious other place to grab the kernel and u-boot source
code, and the defconfig was not updated since a long time, let's
simply get rid of it.

[Peter: also drop README]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

micropython: needs dynamic library

Fixes:

   http://autobuild.buildroot.org/results/06f/06fc79dad3d4c0c5f997f4c2e4b52014727764ac/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-numpy: re-enable for uClibc

In commit b0f025386f6861fdc21e38e3a33b65669276f2c2 a patch was added
to make sure that python-numpy does work in uClibc. This patch was
needed for the x86 architecture, because uClibc in fact does support
fenv for x86. However, we don't turn on this support in our uClibc
config. Because the Config.in depends still allowed uClibc for x86,
this lead to a built failure, which lead to the fix in commit b0f02538.
But since this fix also fixes it for all other (supported)
architectures, we can just remove the !uClibc dependency completely.

This is also propagated to the reverse dependency in opencv3.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nfs-utils: systemd support

nfs-utils has been patched to install only the needed systemd unit files
supported.
Also tmpfiles was needed because the folder /run/nfs is a tmpfs
and nfs-utils need some files to be there to work correctly.

Signed-off-by: Aurélien Chabot <aurelien@chabot.fr>
[Maxime: Remove patches included originally in the patch as they have
have been merged upstream in v1.3.3]
Signed-off-by Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[Thomas:
  - add comment in nfs-utils_env.sh to explain why an empty script is
    needed.
  - remove incorrect indentation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nfs-utils: Bump version

Remove patch as it was backported from upstream:
http://git.linux-nfs.org/?p=steved/nfs-utils.git;a=commit;h=17a3e5bffb7110d46de1bf42b64b90713ff5ea50

Signed-off-by Maxime Hadjinlian <maxime.hadjinlian@gmail.com>

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/schifra: remove package

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Arnaud Rébillout <rebillout@syscom.ch>
Cc: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

devmem2: add a hash file

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

squashfs: Add lz4 hc compression

lz4 offers a high compression mode. A minimalistic file system shrinks by about 15%.

[Peter: Unconditionally use hc mode for lz4 instead of introducing another option]
Signed-off-by: Matthias Weisser <m.weisser.m@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpdecimal: fix comment about fenv.h

We're disabling fenv.h usage on i386 because it is not available in
musl/uclibc (and not musl/glibc as was written).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpdecimal: use official upstream site

The official upstream site is available again, so let's switch to
using it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Revert "opencv: mark as not available on Xtensa"

Now that xtensa toolchain is able to compile huge functions this
workaround is no longer needed.

This reverts commit d21932508e69d4ab849cba9958f953ae9342cb8c.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xtensa: switch from text-section-literals to auto-litpools

Now that both binutils and gcc support auto-litpools use that option
instead of text-section-literals to be able to compile huge functions.

Fixes:
  http://autobuild.buildroot.net/results/dd384fe0ef02a4205bea66a4a16ca2062afe53b4/
  http://autobuild.buildroot.net/results/87dd357a4b883ea3cd75546b3d63c4c28245beee/
  http://autobuild.buildroot.net/results/b5bca00dec1ecb118c7fb9c10dee74c94809c831/
and many others.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gcc: backport mauto-litpools xtensa option

With support from assembler this option allows compiling huge functions,
where single literal pool at the beginning of a function may not be
reachable by L32R instructions at its end.

Currently assembler --auto-litpools option cannot deal with literals
used from multiple locations separated by more than 256 KBytes of code.
Don't turn constants into literals, instead use MOVI instruction to load
them into registers and let the assembler turn them into literals as
necessary.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

binutils: backport auto-litpools xtensa gas option

Auto-litpools is the automated version of text-section-literals: literal
pool candidate frags are planted every N frags and during relaxation
they are turned into actual literal pools where literals are moved to
become reachable for their first reference by L32R instruction.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gcc: remove the --with-pkgversion option from the ccache hash

One of the gcc configure options that we hash for ccache is
--with-pkgversion which is set to something like Buildroot
2015.11-git-00426-ge7e7e4f - i.e., it will change with every buildroot
commit. That's obviously not wanted, so substitute this away.

Also add a \n to the printf so the output is a bit more readable.

[Peter: update documentation to match]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ccache: support changing the output directory

When building in a different output directory than the original build,
there will currently be a lot of ccache misses because in many cases
there is some -I/... absolute path in the compilation. Ccache has an
option CCACHE_BASEDIR to substitute absolute paths with relative paths,
so they wil be the same in the hash (and in the output).

Since there are some disadvantages to this path rewriting, it is made
optional as BR2_CCACHE_USE_BASEDIR. It defaults to y because the
usefulness of ccache is severely reduced without this option.

In addition to CCACHE_BASEDIR, we also substitute away the occurences
of $(HOST_DIR) in the calculation of the compiler hash. This is done
regardless of the setting of BR2_CCACHE_USE_BASEDIR because it's
quite harmless.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ccache: use mtime for external toolchain, CONF_OPTS for internal toolchain

Our current ccache disables hashing of the compiler executable itself,
because using the default 'mtime' doesn't work in buildroot: we always
rebuild the compiler, so the mtime is always different, so the cache
always misses.

However, in the current situation, if a user changes the compiler
configuration (which would result in the compiler generating different
object files than before) and does 'make clean all', ccache may in fact
reuse object files from the previous run. This rarely gives problems,
because
(1) the cache expires quite quickly (it's only 1GB by default),
(2) radically changing compiler options will cause cache misses because
    different header files are used,
(3) many compiler changes (e.g. changing -mtune) have little practical
    effect because the resulting code is usually still compatible,
(4) we currently don't use CCACHE_BASEDIR, and almost all object files
    will contain an absolute path (e.g. in debug info), so when
    building in a different directory, most of it will miss,
(5) we do mostly build test, and many of the potential problems only
    appear at runtime.
Still, when ccache _does_ use the wrong cached object files, the
effects are really weird and hard to debug. Also, we want reproducible
builds and obviously the above makes builds non-reproducible. So we
have a FAQ entry that warns against using ccache and tells the user to
clear the cache in case of problems.

Now that ccache is called from the toolchain wrapper, it is in fact
possible to at least use the 'mtime' compiler hash for the external
toolchain and for the host-gcc. Indeed, in this case, the compiler
executable comes from a tarball so the mtime will be a good reference
for its state. Therefore, the patch (sed script) that changes the
default from 'mtime' to 'none' is removed.

For the internal toolchain, we can do better by providing a hash of
the relevant toolchain options. We are only interested in things that
affect the compiler itself, because ccache also processes the header
files and it doesn't look at libraries because it doesn't cache the
link step, just compilation. Everything that affects the compiler
itself can nicely be summarised in $(HOST_GCC_FINAL_CONF_OPTS). Of
course, also the compiler source itself is relevant, so the source
tarball and all the patches are included in the hash. For this purpose,
a new HOST_GCC_XTENSA_OVERLAY_TAR is introduced.

The following procedure tests the ccache behaviour:

 Use this defconfig:
BR2_arm=y
BR2_CCACHE=y

 make
 readelf -A output/build/uclibc-1.0.6/libc/signal/signal.os
-> Tag_CPU_name: "ARM926EJ-S"

 Now make menuconfig, change variant into BR2_cortex_a9

 make clean; make
 readelf -A output/build/uclibc-1.0.6/libc/signal/signal.os
-> Tag_CPU_name: "ARM926EJ-S"
 should be "Cortex-A9"

After this commit, it is "Cortex-A9".

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Danomi Manchego <danomimanchego123@gmail.com>
Cc: Károly Kasza <kaszak@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain-wrapper: support change of BR2_CCACHE

By moving the ccache call to the toolchain wrapper, the following
scenario no longer works:

make foo-dirclean all BR2_CCACHE=

That's a sometimes useful call to check if some failure is perhaps
caused by ccache.

We can enable this scenario again by exporting BR_NO_CCACHE when
BR2_CCACHE is not set, and by handling this in the toolchain wrapper.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile.in: remove now-unused TARGET_CC/CXX_NOCCACHE

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qpid-proton: remove now-redundant ccache handling patch

Although this patch is still relevant for upstream, we don't need it
anymore in buildoort because we no longer have _ARG1.

Note that it would be relevant again if we would add host-qpid-proton.
However, the 0.10 release already has the fix.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package-cmake: remove now-redundant target ccache support

All the complexity with the different ways that CMAKE_C_COMPILER and
CMAKE_C_COMPILER_ARG1 can be set are no longer needed, it's all handled
by the toolchain wrapper now.

Note that it is still necessary to handle this for the host build.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5base: remove now-redundant ccache handling

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

cryptodev-linux: remove now-redundant fix-ccache-compile patch

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

barebox: remove now-redundant ccache handling

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uboot: remove now-redundant ccache handling

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: remove now-redundant ccache handling

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imx-vpu: remove now-redundant ccache handling

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imx-lib: remove now-redundant ccache handling

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

perl: Remove ccache handling

Now the ccache handling has moved to the toolchain wrapper, it is no
longer necessary to pass TARGET_CC_NOCCACHE.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

infra: move ccache handling to the toolchain wrapper

Since we always have a toolchain wrapper now, we can move the ccache
call to the toolchain wrapper.

The hostcc ccache handling obviously stays.

The global addition of ccache to TARGET_CC/CXX is removed, but many
individual packages and infras still add it. This means we have a
chain like this: ccache -> toolchain-wrapper -> ccache -> gcc
However, this is fairly harmless: for cache misses, the inner ccache
just adds overhead and for cache hits, the inner ccache is never
called. Later patches will remove these redundant ccache calls.

As a side effect, perl now supports ccache as well.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Danomi Manchego <danomimanchego123@gmail.com>
Cc: Károly Kasza <kaszak@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc: remove unsafe patch check (poison system dirs) patch

Now that the calls to gcc always pass through the toolchain wrapper, it
is no longer necessary to patch gcc to support poisoning.

This does have the disadvantage that there is no unsafe path check for
libc, libgcc and libstdc++ (all of these are built before the wrapper
exists). But we can assume that the toolchain components themselves
should be pretty safe.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc: use toolchain wrapper

We have a toolchain wrapper for external toolchain, but it is also
beneficial for internal toolchains, for the following reasons:

1. It can make sure that BR2_TARGET_OPTIMIZATION is passed to the
   compiler even if a package's build system doesn't honor CFLAGS.
2. It allows us to do the unsafe path check (i.e. -I/usr/include)
   without patching gcc.
3. It makes it simpler to implement building each package with a
   separate staging directory (per-package staging).
4. It makes it simpler to implement a compiler hash check for ccache.

The wrapper is reused from the external toolchain. A third CROSS_PATH_
option is added to the wrapper: in this case, the real executable is in
the same directory, with the extension .real.

The creation of the simple symlinks is merged with the creation of the
wrapper symlinks, otherwise part of the -gcc-ar handling logic would
have to be repeated.

The complex case-condition could be refactored with the one for the
external toolchain, but then it becomes even more complex because
they each have special corner cases. For example, the internal
toolchain has to handle *.real to avoid creating an extra indirection
after host-gcc-{final,initial}-rebuild.

Instead of creating the .real files, it would also have been possible
to install the internal toolchain in $(HOST_DIR)/opt, similar to what
we do for the external toolchain. However, then we would also have to
copy things to the sysroot and do more of the magic that the external
toolchain is doing. So keeping it in $(HOST_DIR)/usr/bin is much
simpler.

Note that gcc-initial has to be wrapped as well, because it is used for
building libc and we want to apply the same magic when building libc.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Jérôme Oufella <jerome.oufella@savoirfairelinux.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain-external: move wrapper to toolchain directory

The toolchain wrapper will be reused for the internal toolchain, so it
belongs in the toolchain directory. Also, the ext- prefix is removed
from it. The build commands are moved to a new toolchain-wrapper.mk.

The wrapper arguments that are also relevant for the internal toolchain
wrapper are moved to toolchain-wrapper.mk, the rest stays in
toolchain-external.mk.

While we're at it, move the building of the toolchain wrapper to the
build step of toolchain-external. There is no specific reason to do
this, other than that it fits better semantically. Also remove the
MESSAGE call, otherwise we'd see:
>>> toolchain-external undefined Building
>>> toolchain-external undefined Building toolchain wrapper
/usr/bin/gcc ...
Having an extra "Building toolchain wrapper' message is pointless.

The useless condition on $(BR2_TARGET_OPTIMIZATION) is removed. It was
always true because it wasn't qstrip'ped first, so clearly it works
without that condition as well.

Also rewrapped some comments and removed the 'external' reference.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Jérôme Oufella <jerome.oufella@savoirfairelinux.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/manual: document new actual source package variables

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: define actual sources for arago toolchains

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: mass-define actual source tarball for known patterns

For some external toolchain vendors the actual source code URL can be simply
derived from the binary file URL.

Here we obtain TOOLCHAIN_EXTERNAL_ACTUAL_SOURCE_TARBALL for all Mentor and
Linaro toolchains with a few $(subst) calls.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

legal-info: allow to declare the actual sources for binary packages

The FOO_SITE/FOO_SOURCE variables usually point to a tarball containing
source code.

For the downloaded external toolchains this is not true, the "source"
tarball actually contains binaries. This is fine for making Buildroot
work, but for legal-info we really want to ship real source code, not
binaries.

Luckily, some (hopefully all) toolchain vendors publish a downloadable
tarball containing the source code counterpart for their binary
packages.

Here we allow the user to declare the URL of this other tarball in the
pair of variables FOO_ACTUAL_SOURCE_TARBALL (by default equal to
FOO_SOURCE) and FOO_ACTUAL_SOURCE_SITE (by default equal to FOO_SITE).
If the "actual source" package can be downloaded from the same
directory as the binary package, then only FOO_ACTUAL_SOURCE_TARBALL
needs to be set.

Note this change is not strictly toolchain-specific: it might be useful
for other packages that happen to ship binaries in the same way.

[Thomas:
  - remove "the source code has not been saved" warning that could
    never be triggered due to how the conditions were
    organized. Discussed with Luca live during the meeting.]

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mpd: Without native RPC use libtirpc

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

kodi: Without native RPC use libtirpc

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
----
v2 -> v3:
   - Remove the select (not needed, we only have to propagate the
     depends on)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libnfs: Without native RPC use libtirpc

Signed-off-by Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

blackfin: 2012R2 toolchain is gone, remove kludges

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: Remove BLACKFIN_UCLINUX_2012R2

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

skeleton: Pretty fixes for /etc/profile

Fix indent and put PATH on a single line.

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

skeleton: Remove bash specific files

Signed-off-by Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

skeleton: Clean up profile file

There's a lot of code in /etc/profile, which doesn't really belong in a
minimal default skeleton.

Also, add an 'unset i' to avoid clutter.

If the user has a specific needs, it needs to be added in
/etc/profile.d/ by a post-build script.

Signed-off-by Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

download: get rid of trailing slash removal hack for FOO_SITE

Not needed anymore since the URLs have been cleared, the manual states
they are illegal and a check has been introduced to notice future
mistakes.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pkg-generic: prevent _SITE URLs with a trailing slash

A trailing slash in FOO_SITE is useless, since Buildroot automatically adds
a slash between FOO_SITE and the filename as appropriate.

Moreover it is potentially harmful, which led to introducing a workaround
to strip them:

    commit 1cbffbd015106ea90fe49e27433375769dc1035b
    Author: Shawn J. Goff <shawn7400@gmail.com>
    Date:   Fri Apr 12 09:40:30 2013 +0000

        eliminate double slashes caused by FOO_SITE ending in a slash

        When a FOO_SITE variable ends in a slash and gets joined with a
        FOO_SOURCE variable like $(FOO_SITE)/$(FOO_SOURCE), the resulting URI
        has a double slash. While double-slashes are fine in unix paths, they
        are reserved in URIs - the part following '//' must be an authority.

So let's ban trailing slashes entirely. They have all been removed in
a 7b0e757fb85fd, now add a check to error out loudly in case a new one
is added.

Example commands to test this check:

  $ make busybox-dirclean busybox-source
  rm -Rf /home/murray/devel/buildroot/output/build/busybox-1.23.2
  busybox-1.23.2.tar.bz2: OK (md5: 7925683d7dd105aabe9b6b618d48cc73)
  busybox-1.23.2.tar.bz2: OK (sha1: 7f37193cb249f27630e0b2a2c6c9bbb7b1d24c16)
  $
  $ make BUSYBOX_SITE=http://www.busybox.net/downloads/ busybox-dirclean busybox-source
  rm -Rf /home/murray/devel/buildroot/output/build/busybox-1.23.2
  BUSYBOX_SITE (http://www.busybox.net/downloads/) cannot have a trailing slash
  make[1]: *** [/home/murray/devel/buildroot/output/build/busybox-1.23.2/.stamp_downloaded] Error 1
  make: *** [_all] Error 2
  $

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: strip trailing slash from autogenerated FOO_SITE

Trailing slashes are going to be declared illegal from FOO_SITE
variables.

But Buildroot internally generates such a variable when using a custom
external toolchain (i.e. BR2_TOOLCHAIN_EXTERNAL_CUSTOM). This is
because TOOLCHAIN_EXTERNAL_SITE is set to
$(dir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL))), and $(dir)
leaves a trailing slash.

Fix it using patsubst, just like linux and the bootloaders do.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: add ARC HS38 VDK virtual boards

Virtualizer Development Kits (VDKs) are software development kits
containing design-specific virtual prototypes as well as debug and
analysis tools and sample software.

With this change we add support for VDK based on ARC HS38 core.

Note that FS-overlay is required to allow instantiation of console on
both serial port and LCD screen simultaneously.

Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

zxing: bump upstream version, drop useless patch

The 0001-CMakeLists-add-rules-for-installation.patch patch has been
merged upstream 7 minutes after it was submitted. So let's bump to the
latest upstream version and drop the no longer needed patch.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

zxing-cpp: new package, replacing zxing

ZXing was hosted on Google Code, which is a closing. The current link
was already redirecting to the github repo.

But upstream is no longer supporting the cpp bindings, it's now a Java
library/application.

A fork has been created from the latest cpp source of the original
upstream. So this commit creates a new package, zxing-cpp, and adds
Config.in.legacy handling for the old zxing pakcage that is removed.

[Thomas:
  - add a patch that improves the CMakeLists.txt file to add
    installation rules. This allows to remove the manual installation
    logic from zxing-cpp.mk.
  - make libiconv a normal optional dependency. No need to involve
    BR2_ENABLE_LOCALE in the condition, since libiconv can only be
    enabled when !BR2_ENABLE_LOCALE.
  - bump to the latest upstream version.
  - add hash file.]

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freerdp: needs C++

FreeRDP does not have a single C++ source file, however it insists on
having a C++ compiler. Removing that requirement is a bit too much
involving, so we just depend on it...

Fixes:
    http://autobuild.buildroot.org/results/e5b/e5bee760d52e5ee433dcb6c8a7296f99312cfcf4/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/freerdp: fix missing define

FreeRDP uses CMSPAR, which is defined by glibc in bits/termios.h .

glibc has two flavours of bits/termios.h: a genmeric one and an
architecture-specific one. When installing, glibc will install the
architecture-specific file if it exists, otherwise it installs the
generic file. Only Alpha, MIPS, PPC and Sparc have their own
bits/termios.h.

The generic bits/termios.h, as well as the Alpha, PPC and Sparc flavours
do define CMSPAR. However, the MIPS flavour does not define it.

We add a patch to FreeRDP that defines CMSPAR to the value from the
generic value, which is also the value known to the Linux kernel for
MIPS.

Fixes:
    http://autobuild.buildroot.org/results/0b4/0b4793f0bf9f4c57933897f3480054a4e06528ad/
    http://autobuild.buildroot.org/results/7a2/7a2284d0a2987158fa2e78f789b07c8c6fcdb974/
    http://autobuild.buildroot.org/results/387/3874088c3ccd4bbf76ea0c911ca1ef64c7dc9d1c/
    ...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain: Fix glibc breakage

Introduced by previous patch 0f75b2635ee564fbbdb9ea631cf39fa8731d6d6c,
this printf would break the build of glibc, because there is no format
to printf:

    printf: usage: printf [-v var] format [arguments]

Signed-off-by Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/iptables: fix build on musl

Fixes:
http://autobuild.buildroot.net/results/68b/68bf8830f87ab32f4fd650c9dd4a8c80592983a9/
http://autobuild.buildroot.net/results/d9b/d9bb677fb5510adf05ffb4afbc63ead83d7e18dd/
http://autobuild.buildroot.net/results/4b8/4b80b6d0131b624301a5cfcd5541897f411043c9/

.. and others.

This patch includes two backported patches from iptables git, plus one
pending patch not integrated yet.

Signed-off-by: Brendan Heading <brendanheading@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vim: bump to version 7.4.889

And also move to GitHub since Google Code is going to die soon.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mesa3d: bump to version 11.0.2

Mesa3d 10.6.x is reaching end-of-life:
http://lists.freedesktop.org/archives/mesa-announce/2015-October/000178.html
"NOTE: It is anticipated that 10.6.9 will be the final release in the
10.6 series. Users of 10.6 are encouraged to migrate to the 11.0 series
in order to obtain future fixes."

Run-time testing with Kodi Isengard on an Intel GPU was positive.

Rebased 0001-Fix-khrplatform.h-not-installed-if-EGL-is-disabled.patch.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

system: clarify /dev management using devtmpfs + {mdev, eudev}

The "Dynamic using mdev" and "Dynamic using eudev" /dev management
methods are using devtmpfs, just like "Dynamic using devtmpfs only",
on top of which they add either mdev or eudev. But their names might
suggest they use mdev only or eudev only.

Clarify their descriptions by adding "devtmpfs +" to make it
unambiguous.

[Thomas: rewrap the paragraphs in the manual. It makes the diff a lot
less readable, but we actually want the result to be wrapped.]

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

host-localdef fails under gcc5

Building host-localdef fails under gcc5.1 reporting multiple definitions and undefined references:

argp-help.o: In function `argp_fmtstream_write':
argp-help.c:(.text+0x1dc0): multiple definition of `argp_fmtstream_write'
argp-fmtstream.o:argp-fmtstream.c:(.text+0x750): first defined here
argp-help.o: In function `argp_fmtstream_puts':
argp-help.c:(.text+0x1e10): multiple definition of `argp_fmtstream_puts'
argp-fmtstream.o:argp-fmtstream.c:(.text+0x810): first defined here
argp-help.o: In function `argp_fmtstream_putc':
argp-help.c:(.text+0x1e80): multiple definition of `argp_fmtstream_putc'
argp-fmtstream.o:argp-fmtstream.c:(.text+0x7b0): first defined here
argp-help.o: In function `argp_fmtstream_set_lmargin':
argp-help.c:(.text+0x1ed0): multiple definition of `argp_fmtstream_set_lmargin'
argp-fmtstream.o:argp-fmtstream.c:(.text+0x590): first defined here
argp-help.o: In function `argp_fmtstream_set_rmargin':
argp-help.c:(.text+0x1f00): multiple definition of `argp_fmtstream_set_rmargin'
argp-fmtstream.o:argp-fmtstream.c:(.text+0x5c0): first defined here
argp-help.o: In function `argp_fmtstream_set_wmargin':
argp-help.c:(.text+0x1f30): multiple definition of `argp_fmtstream_set_wmargin'
argp-fmtstream.o:argp-fmtstream.c:(.text+0x5f0): first defined here
argp-help.o: In function `argp_fmtstream_point':
argp-help.c:(.text+0x1f60): multiple definition of `argp_fmtstream_point'
argp-fmtstream.o:argp-fmtstream.c:(.text+0x620): first defined here
charmap.o: In function `cmlr_open.constprop.2':
charmap.c:(.text+0x230a): undefined reference to `charmap_hash'
charmap.o: In function `charmap_read':
charmap.c:(.text+0x2397): undefined reference to `charmap_hash'
locfile.o: In function `locfile_read':
locfile.c:(.text+0x2e4): undefined reference to `locfile_hash'
locfile.c:(.text+0x8f4): undefined reference to `locfile_hash'
locfile.c:(.text+0x9b3): undefined reference to `locfile_hash'
locfile.c:(.text+0xa36): undefined reference to `locfile_hash'
collect2: error: ld returned 1 exit status
Makefile:58: recipe for target 'localedef' failed

Ref: http://permalink.gmane.org/gmane.comp.embedded.ptxdist.devel/12950

Signed-off-by: Stephen Agate <stephen.agate@talktalk.net>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lz4: adjust homepage URL

Lz4 is no longer developed on google code.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ibrdtn-tools: fix linking problem when building statically

The problem looks like this:

/br/output/host/usr/mipsel-buildroot-linux-uclibc/sysroot/usr//lib/librt.a(timer_routines.os):
In function `__start_helper_thread':
timer_routines.c:(.text+0x2f4): undefined reference to `pthread_atfork'
collect2: error: ld returned 1 exit status

Adding -pthread to LDFLAGS fixes the problem.

Fixes:

  http://autobuild.buildroot.net/results/a87/a87a764d3a28f835ed8645923594f7023a662ae8/

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package: Replace 'echo -n' by 'printf'

'echo -n' is not a POSIX construct (no flag support), we shoud use
'printf', especially in init script.

This patch was generated by the following command line:
git grep -l 'echo -n' -- `git ls-files | grep -v 'patch'` | xargs sed -i 's/echo -n/printf/'

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xdriver_xf86-video-sis: bump to version 0.10.8

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>