binutils-gdb.git
13 years agodaily update
Alan Modra [Fri, 4 Feb 2011 23:00:05 +0000 (23:00 +0000)]
daily update

13 years agoAdd Python support for GDB events.
Sami Wagiaalla [Fri, 4 Feb 2011 21:54:16 +0000 (21:54 +0000)]
Add Python support for GDB events.

2011-02-04  Sami Wagiaalla  <swagiaal@redhat.com>

* gdb.python/py-evthreads.c: New file.
* gdb.python/py-evthreads.exp: New file.
* gdb.python/py-events.py: New file.
* gdb.python/py-events.exp: New file.
* gdb.python/py-events.c: New file.

2011-02-04  Sami Wagiaalla  <swagiaal@redhat.com>
                Oguz Kayral <oguzkayral@gmail.com>

* python/py-inferior.c (python_on_normal_stop): New function.
(python_on_resume): New function.
(python_inferior_exit): New function.
(gdbpy_initialize_inferior): Add normal_stop, target_resumed, and
inferior_exit observers.
* python/py-evtregistry.c: New file.
* python/py-threadevent.c : New file.
* python/py-event.c: New file.
* python/py-evts.c: New file.
* python/py-continueevent.c: New file.
* python/py-bpevent.c: New file.
* python/py-signalevent.c: New file.
* python/py-exetiedevent.c: New file.
* python/py-breakpoint.c (gdbpy_breakpoint_from_bpstats): New function.
Move struct breakpoint_object from here...
* python/python-internal.h: ... to here.
* python/py-event.h: New file.
* python/py-events.h: New file.
* Makefile.in (SUBDIR_PYTHON_OBS): Add py-breakpointstopevent.o,
py-continueevent.o, py-event.o, py-eventregistry.o, py-events.o,
py-exitedevent.o, py-signalstopevent.o, and py-stopevent.o.
(SUBDIR_PYTHON_SRCS): Add py-breakpointstopevent.c,
py-continueevent.c, py-event.c, py-eventregistry.c, py-events.c,
py-exitedevent.c, py-signalstopevent.c, and py-stopevent.c.
Add build rules for all the above.

13 years ago * dwarf2read.c (dwarf2_section_empty_p): New function.
Tom Tromey [Fri, 4 Feb 2011 20:33:09 +0000 (20:33 +0000)]
* dwarf2read.c (dwarf2_section_empty_p): New function.
(dwarf2_read_section): Use dwarf2_section_empty_p.
(dwarf2_section_size): New function.
(dwarf2_get_section_info): Unconditionally read section.
(dwarf2_read_index): Use dwarf2_section_empty_p.
(partial_read_comp_unit_head): Use dwarf2_section_size.
(dwarf2_symbol_mark_computed): Likewise.

13 years ago * gdbint.texinfo (Formatting): Mention some formatting guidelines
Pedro Alves [Fri, 4 Feb 2011 19:10:12 +0000 (19:10 +0000)]
* gdbint.texinfo (Formatting): Mention some formatting guidelines
for casts and unary operators.

13 years ago2011-02-04 David Daney <ddaney@caviumnetworks.com>
David Daney [Fri, 4 Feb 2011 18:45:15 +0000 (18:45 +0000)]
2011-02-04 David Daney <ddaney@caviumnetworks.com>

* NEWS: Add item for "catch syscall" on mips*-linux* targets.

13 years ago * gdb.texinfo (GDB/MI Async Records): Document that symbols-loaded
Tom Tromey [Fri, 4 Feb 2011 18:35:04 +0000 (18:35 +0000)]
* gdb.texinfo (GDB/MI Async Records): Document that symbols-loaded
is not useful.

13 years agogdb/
David Daney [Fri, 4 Feb 2011 18:34:43 +0000 (18:34 +0000)]
gdb/
2011-02-04 David Daney <ddaney@caviumnetworks.com>

* mips-linux-tdep.c: Include xml-syscall.h.
(mips_linux_get_syscall_number): New function.
(mips_linux_init_abi): Add calls to
mips_linux_get_syscall_number() and set_xml_syscall_file_name().
* data-directory/Makefile.in (SYSCALLS_FILES): Add
mips-o32-linux.xml, mips-n32-linux.xml and mips-n64-linux.xml
* syscalls/mips-n32-linux.xml: New file.
* syscalls/mips-n64-linux.xml: New file.
* syscalls/mips-o32-linux.xml: New file.
gdb/testsuite/
2011-02-04 David Daney <ddaney@caviumnetworks.com>

* gdb.base/catch-syscall.exp: Enable for mips*-linux*.

13 years ago * dwarf2read.c (dwarf2_ranges_read): Skip empty range entries.
Ulrich Weigand [Fri, 4 Feb 2011 18:13:25 +0000 (18:13 +0000)]
* dwarf2read.c (dwarf2_ranges_read): Skip empty range entries.
Complain about inverted range entries.
(dwarf2_record_block_ranges): Likewise.

13 years ago Fix some typos.
Thiago Jung Bauermann [Fri, 4 Feb 2011 17:27:19 +0000 (17:27 +0000)]
Fix some typos.
* breakpoint.c (update_watchpoint): Fix name of the
update_global_location_list function.
(print_one_breakpoint): Fix typo.
(_initialize_breakpoint): Remove extra space in hbreak help
string.
* breakpoint.h (struct bp_location) <length>: Fix field
description.

13 years ago * regcache.c (registers_changed_ptid): Don't explictly always
Pedro Alves [Fri, 4 Feb 2011 15:46:49 +0000 (15:46 +0000)]
* regcache.c (registers_changed_ptid): Don't explictly always
clear `current_regcache'.  Only clear current_thread_ptid and
current_thread_arch when PTID matches.  Only reinit the frame
cache if PTID matches the current inferior_ptid.  Move alloca(0)
call to ...
(registers_changed): ... here.

13 years ago*** empty log message ***
gdbadmin [Fri, 4 Feb 2011 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***

13 years ago gas/
Bernd Schmidt [Thu, 3 Feb 2011 23:20:26 +0000 (23:20 +0000)]
gas/
* doc/as.texinfo (Target TIC6X options): Don't mention "-matomic".
* doc/c-tic6x.texi (TIC6X Directives): Don't mention ".atomic".
(TIC6X Options): Don't mention "-matomic".
* config/tc-tic6x.c (OPTION_MATOMIC, OPTION_MNO_ATOMIC): Delete.
(md_longopts): Remove corresponding entries.
(md_parse_option): Don't handle them.
(md_show_usage): Don't document them.
(tic6x_atomic): Delete variable.
(tic6x_update_features): Always copy tic6x_arch_enable to
tic6x_features.
(tic6x_arch_enable): Remove references to TIC6X_INSN_ATOMIC.
(s_tic6x_atomic, s_tic6x_noatomic): Remove functions.
(md_pseudo_table): Remove ".atomic" and ".noatomic".

gas/testsuite/
* gas/tic6x/dir-junk.l: Remove tests for .atomic and .noatomic.
* gas/tic6x/dir-junk.s: Likewise.
* gas/tic6x/insns-c674x-bad.d: Remove test.
* gas/tic6x/insns-c674x-bad.l: Likewise.
* gas/tic6x/insns-atomic.d: Remove "-matomic" switch.

include/opcode/
* tic6x-opcode-table.h (cmtl, ll, sl): Available on C64XP.
* tic6x.h (TIC6X_INSN_ATOMIC): Remove.

13 years agodaily update
Alan Modra [Thu, 3 Feb 2011 23:00:04 +0000 (23:00 +0000)]
daily update

13 years ago * arm-tdep.c (arm_skip_stack_protector): Accept any symbol that
Ulrich Weigand [Thu, 3 Feb 2011 18:34:55 +0000 (18:34 +0000)]
* arm-tdep.c (arm_skip_stack_protector): Accept any symbol that
starts with __stack_chk_guard as stack guard symbol.

13 years agohttp://sourceware.org/ml/gdb-patches/2010-12/msg00300.html
Andrew Burgess [Thu, 3 Feb 2011 14:45:37 +0000 (14:45 +0000)]
sourceware.org/ml/gdb-patches/2010-12/msg00300.html
Improve the ordering of line table entries when dealing with the end
of sequence markers.  This will allow us to disassemble over the border
between two compile units while also displaying source code information.

13 years agolibiberty: documentation markup and order fixes.
Ralf Wildenhues [Thu, 3 Feb 2011 07:23:59 +0000 (07:23 +0000)]
libiberty: documentation markup and order fixes.

libiberty/:
* splay-tree.c: Escape wrapping newlines in texinfo markup
with '@', to fix function declaration output rendering.
* gather-docs: Relax and improve macro name matching to actually
match all current names and to allow input line wrapping.
* bsearch.c, concat.c, crc32.c, fnmatch.txh, fopen_unlocked.c,
hashtab.c, insque.c, make-relative-prefix.c, memchr.c, memcmp.c,
memcpy.c, memmem.c, memmove.c, mempcpy.c, memset.c,
pexecute.txh, random.c, setenv.c, setproctitle.c,
simple-object.txh, snprintf.c, stpncpy.c, strncmp.c, strtod.c,
strtol.c, vasprintf.c, vprintf.c, vsnprintf.c, xmemdup.c:
Wrap long texinfo input lines.
* functions.texi: Regenerate.

13 years ago*** empty log message ***
gdbadmin [Thu, 3 Feb 2011 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***

13 years agodaily update
Alan Modra [Wed, 2 Feb 2011 23:00:07 +0000 (23:00 +0000)]
daily update

13 years ago2011-02-02 Sriraman Tallam <tmsriram@google.com>
Sriraman Tallam [Wed, 2 Feb 2011 21:55:29 +0000 (21:55 +0000)]
2011-02-02  Sriraman Tallam  <tmsriram@google.com>

* icf.h (is_section_foldable_candidate): Change type of parameter
        to std::string.
* icf.cc (Icf::find_identical_sections): Change type of local variable
        section_name to be std::string.
(is_function_ctor_or_dtor): Change type of parameter to std::string.

13 years ago * arm-tdep.c (skip_prologue_function): Add GDBARCH and IS_THUMB
Ulrich Weigand [Wed, 2 Feb 2011 19:45:32 +0000 (19:45 +0000)]
* arm-tdep.c (skip_prologue_function): Add GDBARCH and IS_THUMB
arguments.  Skip in-prologue calls to glibc __aeabi_read_tp
implementation even if no symbols are available.
(thumb_analyze_prologue): Update call to skip_prologue_function.
(arm_analyze_prologue): Likewise.

13 years ago * arm-tdep.c: Include "observer.h".
Ulrich Weigand [Wed, 2 Feb 2011 19:44:44 +0000 (19:44 +0000)]
* arm-tdep.c: Include "observer.h".
(arm_prologue_this_id): Use frame PC if get_frame_func returns 0.
(arm_exidx_data_key): New static variable.
(struct arm_exidx_entry, arm_exidx_entry_s): New data types.
(struct arm_exidx_data): Likewise.
(arm_exidx_data_free): New function.
(arm_compare_exidx_entries): Likewise.
(arm_obj_section_from_vma): Likewise.
(arm_exidx_new_objfile): Likewise.
(arm_find_exidx_entry): Likewise.
(arm_exidx_fill_cache): Likewise.
(arm_exidx_unwind_sniffer): Likewise.
(arm_exidx_unwind): New global variable.
(arm_gdbarch_init): Append unwinder arm_exidx_unwind.
(_initialize_arm_tdep): Attach arm_exidx_new_objfile to new_objfile
observer.  Register arm_exidx_data_key as objfile data.

13 years ago * arm-tdep.c (arm_analyze_load_stack_chk_guard): Avoid build break
Ulrich Weigand [Wed, 2 Feb 2011 18:03:35 +0000 (18:03 +0000)]
* arm-tdep.c (arm_analyze_load_stack_chk_guard): Avoid build break
due to accessing uninitialized variable.  Fix indentation.

13 years ago gdb/
Pedro Alves [Wed, 2 Feb 2011 17:41:54 +0000 (17:41 +0000)]
gdb/
* c-valprint.c (c_value_print): When doing virtual base pointer
adjustment, create a new value with adjusted contents rather than
changing the contents of the value being printed (and getting it
wrong).

gdb/testsuite/
* gdb.cp/virtbase.cc (VirtualBase, VirtualMiddleA, VirtualMiddleB)
(Virtual): New structs.
(virtual_o, virtual_middle_b): New globals.
* gdb.cp/virtbase.exp: New tests.

13 years ago * xml-support.c (xml_find_attribute): New.
Pedro Alves [Wed, 2 Feb 2011 16:12:59 +0000 (16:12 +0000)]
* xml-support.c (xml_find_attribute): New.
(xinclude_start_include): Use it.
* xml-support.h (xml_find_attribute): Declare.
* memory-map.c (memory_map_start_memory)
(memory_map_start_property): Use xml_find_attribute.
* osdata.c (osdata_start_osdata, osdata_start_column): Use
xml_find_attribute.
* remote.c (start_thread): Use xml_find_attribute.
* solib-target.c (library_list_start_segment)
(library_list_start_section, library_list_start_library)
(library_list_start_list): Use xml_find_attribute.
* xml-tdesc.c (tdesc_start_target, tdesc_start_feature)
(tdesc_start_union, tdesc_start_struct, tdesc_start_flags)
(tdesc_start_field): Use xml_find_attribute.

13 years ago * opencl-lang.c (STRINGIFY): Rename to OCL_STRING.
Ulrich Weigand [Wed, 2 Feb 2011 13:47:06 +0000 (13:47 +0000)]
* opencl-lang.c (STRINGIFY): Rename to OCL_STRING.
(BUILD_OCL_VTYPES): Update.

13 years agofix gdb+python build failure if using non-GNU sed
Joel Brobecker [Wed, 2 Feb 2011 04:36:21 +0000 (04:36 +0000)]
fix gdb+python build failure if using non-GNU sed

Non-GNU sed do not like the '?' quantifier when used in a s/// regexp
that involve back-references, causing the build to fail when trying
to link with Python support. This fixes it by using the '*' quantifier
instead.

gdb/ChangeLog:

  * configure.ac: Work around non-GNU sed limitation when computing
  python version number.
  * configure: Regenerate.

13 years ago*** empty log message ***
gdbadmin [Wed, 2 Feb 2011 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***

13 years agodaily update
Alan Modra [Tue, 1 Feb 2011 23:00:05 +0000 (23:00 +0000)]
daily update

13 years agogdb/
Jan Kratochvil [Tue, 1 Feb 2011 18:56:34 +0000 (18:56 +0000)]
gdb/
Fix debug printing of TYPE_INSTANCE.
* expprint.c (print_subexp_standard) <TYPE_INSTANCE>: New.
(dump_subexp_body_standard) <TYPE_INSTANCE>: New.

13 years agogdb/
Jan Kratochvil [Tue, 1 Feb 2011 18:54:01 +0000 (18:54 +0000)]
gdb/
Fix debug printing of BINOP_IN, OP_OBJC_MSGCALL,
OP_F77_UNDETERMINED_ARGLIST, OP_COMPLEX, OP_OBJC_SELECTOR, OP_NAME,
OP_OBJC_NSSTRING, OP_F90_RANGE and OP_DECFLOAT.
* ada-operator.inc: Rename the file to ...
* ada-operator.def: ... here, wrap all the entries by macro OP.
* expprint.c (op_name_standard): Remove all the entries.  Include
"std-operator.def" instead.
* expression.h (enum exp_opcode): Include "std-operator.def" and
"ada-operator.def".  Move all the entries ...
* std-operator.def: ... here, wrap all the entries by macro OP.

13 years agoUpdated Danish translation.
Nick Clifton [Tue, 1 Feb 2011 13:14:40 +0000 (13:14 +0000)]
Updated Danish translation.

13 years ago*** empty log message ***
gdbadmin [Tue, 1 Feb 2011 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***

13 years agodaily update
Alan Modra [Mon, 31 Jan 2011 23:00:05 +0000 (23:00 +0000)]
daily update

13 years ago * elf64-ppc.c (ppc64_elf_next_input_section): Use elf_gp value
Alan Modra [Mon, 31 Jan 2011 22:38:26 +0000 (22:38 +0000)]
* elf64-ppc.c (ppc64_elf_next_input_section): Use elf_gp value
for toc pointer on any section having makes_toc_func_call set.
(check_pasted_section): Ensure pasted .init/.fini fragments use
the same toc if any has makes_toc_func_call set.

13 years ago2011-01-31 Paul Pluzhnikov <ppluzhnikov@google.com>
Paul Pluzhnikov [Mon, 31 Jan 2011 21:44:52 +0000 (21:44 +0000)]
2011-01-31  Paul Pluzhnikov  <ppluzhnikov@google.com>

* gdb.base/jit.exp: New file.
* gdb.base/jit-main.c: New file.
* gdb.base/jit-solib.c: New file.

13 years ago2011-01-31 Paul Pluzhnikov <ppluzhnikov@google.com>
Paul Pluzhnikov [Mon, 31 Jan 2011 21:43:12 +0000 (21:43 +0000)]
2011-01-31  Paul Pluzhnikov  <ppluzhnikov@google.com>

* breakpoint.h (remove_jit_event_breakpoints): New prototype.
* breakpoint.c (remove_jit_event_breakpoints): New function.
* jit.c (jit_descriptor_addr): Delete.
(registering_code): Delete.
(clear_int): Delete.
(jit_inferior_data): New variable.
(struct jit_inferior_data): New type.
(get_jit_inferior_data): New function.
(jit_inferior_data_cleanup): New function.
(jit_read_descriptor): Adjust.
(jit_register_code): Adjust.
(jit_breakpoint_re_set_internal): New function; move code here ...
(jit_inferior_init): ... from here.
(jit_breakpoint_re_set): Adjust.
(jit_reset_inferior_data_and_breakpoints): New function.
(jit_inferior_created_observer): Adjust.
(jit_inferior_exit_hook): Adjust.
(jit_executable_changed_observer): New function.
(jit_event_handler): Adjust.
(_initialize_jit): Adjust.

13 years ago2011-01-31 Paul Pluzhnikov <ppluzhnikov@google.com>
Paul Pluzhnikov [Mon, 31 Jan 2011 21:37:01 +0000 (21:37 +0000)]
2011-01-31  Paul Pluzhnikov  <ppluzhnikov@google.com>

* breakpoint.h (remove_jit_event_breakpoints): New prototype.
* breakpoint.c (remove_jit_event_breakpoints): New function.
* jit.c (jit_descriptor_addr): Delete.
(registering_code): Delete.
(clear_int): Delete.
(jit_inferior_data): New variable.
(struct jit_inferior_data): New type.
(get_jit_inferior_data): New function.
(jit_inferior_data_cleanup): New function.
(jit_read_descriptor): Adjust.
(jit_register_code): Adjust.
(jit_breakpoint_re_set_internal): New function; move code here ...
(jit_inferior_init): ... from here.
(jit_breakpoint_re_set): Adjust.
(jit_reset_inferior_data_and_breakpoints): New function.
(jit_inferior_created_observer): Adjust.
(jit_inferior_exit_hook): Adjust.
(jit_executable_changed_observer): New function.
(jit_event_handler): Adjust.
(_initialize_jit): Adjust.

13 years ago2011-01-31 Michael Snyder <msnyder@vmware.com>
Michael Snyder [Mon, 31 Jan 2011 20:21:02 +0000 (20:21 +0000)]
2011-01-31  Michael Snyder  <msnyder@vmware.com>

* m32r-tdep.c (m32r_gdbarch_init): Replace accidentally deleted
line.

13 years ago * gdb.opencl/convs_casts.exp: Use tbreak instead of break to
Ulrich Weigand [Mon, 31 Jan 2011 19:05:23 +0000 (19:05 +0000)]
* gdb.opencl/convs_casts.exp: Use tbreak instead of break to
proceed to initial kernel entry point.
* gdb.opencl/datatypes.exp: Likewise.
* gdb.opencl/operators.exp: Likewise.
* gdb.opencl/vec_comps.exp: Likewise.

13 years agoAdded new namespace tests.
Sami Wagiaalla [Mon, 31 Jan 2011 18:29:02 +0000 (18:29 +0000)]
Added new namespace tests.

2011-01-31  Sami Wagiaalla  <swagiaal@redhat.com>

* gdb.cp/nsnested.cc: New.
* gdb.cp/nsnested.exp: New.
* gdb.cp/nsnoimports.exp: New.
* gdb.cp/nsnoimports.cc: New.

13 years ago PR python/12216:
Tom Tromey [Mon, 31 Jan 2011 16:52:35 +0000 (16:52 +0000)]
PR python/12216:
* python/python.c (execute_gdb_command): Call
prevent_dont_repeat.
* top.c (suppress_dont_repeat): New global.
(dont_repeat): Use it.
(prevent_dont_repeat): New function.
* command.h (prevent_dont_repeat): Declare.

13 years ago * write.c (write_contents): Include output file name and bfd error
Nick Clifton [Mon, 31 Jan 2011 16:43:15 +0000 (16:43 +0000)]
* write.c (write_contents): Include output file name and bfd error
value when reporting the inability to write to the output file.
* config/tc-rx.c (rx_handle_align): Do not insert NOPs into align
frag that has a non-zero fill value.

* gas/all/align.d: Skip for the RX.
* gas/elf/group1a.d: Likewise.
* gas/elf/groupautoa.d: Likewise.
* gas/elf/elf.exp: Do not run section5 test for the RX port.
* gas/elf/section4.d: Likewise.
* gas/elf/section7.d: Likewise.
* gas/macros/semi.s: Fill with a non-zero pattern.
* gas/macros/semi.d: Expect non-zero fill value.
* gas/rx/bcnd.d: Update expected disassembly.
* gas/rx/bra.d: Likewise.
* gas/rx/macros.inc: Add reg1 macro.
* gas/rx/max.sm: Use reg1 macro to avoid generating illegal NOP
instruction.
* gas/rx/mov.sm: Likewise.
* gas/rx/max.d: Update expected disassembly.
* gas/rx/mov.d: Likewise.
* gas/rx/rx-asm-good.s: Use Renesas section names.
* gas/rx/rx-asm-good.d: Update expected disassembly.

13 years ago * infcmd.c (finish_backward): Use breakpoint_set_silent.
Tom Tromey [Mon, 31 Jan 2011 15:16:59 +0000 (15:16 +0000)]
* infcmd.c (finish_backward): Use breakpoint_set_silent.
* python/py-breakpoint.c (bppy_set_silent): Use
breakpoint_set_silent.
(bppy_set_thread): Use breakpoint_set_thread.
(bppy_set_task): Use breakpoint_set_task.
* breakpoint.h (breakpoint_set_silent, breakpoint_set_thread)
(breakpoint_set_task): Declare.
(make_breakpoint_silent): Remove.
* breakpoint.c (breakpoint_set_silent): New function.
(breakpoint_set_thread): Likewise.
(breakpoint_set_task): Likewise.
(make_breakpoint_silent): Remove.

13 years ago * breakpoint.h (user_breakpoint_p): Declare.
Tom Tromey [Mon, 31 Jan 2011 15:07:49 +0000 (15:07 +0000)]
* breakpoint.h (user_breakpoint_p): Declare.
* breakpoint.c (user_breakpoint_p): New function.
(breakpoint_1): Use it.
(save_breakpoints): Likewise.

13 years agoPR libgcj/44341
Alexandre Oliva [Mon, 31 Jan 2011 05:26:01 +0000 (05:26 +0000)]
PR libgcj/44341
* configure.ac: Discard --with-* flags for host when configuring
target libraries for cross build.
* configure: Rebuilt.

13 years agoallow building GDB with Python support on MinGW
Joel Brobecker [Mon, 31 Jan 2011 04:42:08 +0000 (04:42 +0000)]
allow building GDB with Python support on MinGW

This makes several adjustements to the configure python-config.py
scripts to deal with the differences between a Unix install of Python
and a Windows install of Python (as downloaded from the Python website).

Differences:

  - The Python executable is directly in the python prefix directory
    as opposed to inside the bin/ subdirectory.

  - The name of the python library is does not have a dot in the version
    number: On Unix, we have libpython2.7, while on Windows, it's
    libpython27.  So the regexp extracting the python version from
    the Python lib filename had to be adjusted slightly.

    Also, the tests checking the name of the libpython had to be
    adjusted to allow for that.

  - There are no link options following the -lpython<version> switch
    on Windows, but the regexp extracting the python version was
    using it as a delimiter.  It had to be removed.

  - python-config.py does not work on Windows, mostly because
    some sysconfig variables are missing.  They are not necessary
    so the script was adapted to skip them if not defined.

  - The paths returned by python-config.py follow the Windows filename
    convention in terms of the directory separator, and this is causing
    trouble when the build environment is cygwin (while the compiler
    and Python are MinGW).  We could have fixed that in the configure
    script, but it felt simpler to do so in python-config.py

gdb/ChangeLog:

        * configure.ac: Add handling of Python distribution on Windows.
        * python-config.py: If the LIBS, SYSLIBS, LIBPL and/or LINKFORSHARED
        sysconfig variables are not defined, then do not use them.
        On Windows, if LIBPL is not defined, then use prefix + '/libs'
        instead.  On Windows, return all paths using forward-slashes
        rather than backslashes.

13 years agodo not use python<version> subdir when including Python .h file
Joel Brobecker [Mon, 31 Jan 2011 04:41:27 +0000 (04:41 +0000)]
do not use python<version> subdir when including Python .h file

This is preparation work for being able to build GDB with Python
support on MinGW.

So far, the "python<version>" subdirectory needs to be specified
when including a Python header file.  In order to do that, we have
some special configury that tweaks the include path returned by
python-config.py such that the use of the subdirectory in the include
is necessary.  This was done in order to protect ourselves from
possible filename conflicts, since some of the filenames chosen by
Python were a little generic.

The problem is that this cannot work with a standard Python install
on MinGW systems.  On such systems, the .h files are located in
<python_prefix>/include.  So, in preparation for allowing us to build
GDB on MinGW with Python support enabled, this patch changes the
requirement to provide the "python<version>" subdirectory in the
include directive.

The positive consequence is that we no longer need to have a set
of #include directives for each version of Python, since the include
directive is now the same for all versions of Python.  However, the
downside is that we are losing the level of protection we were trying
to achieve by forcing the subdirectory in the include directive.
In order to reduce a bit the consequences of a possible conflict,
this patch also changes the location where the -I/path/to/python
switch goes, to be last in the list (suggested by Doug Evans).

One last change is the fact that we are now including Python.h
and all other Python include headers using angle brackets rather
than double-quotes.  This fixes a problem on case-insensitive
systems where #include "Python.h" causes our gdb/python/python.h
header to be included instead of Python's <Python.h> header.

gdb/ChangeLog:

* configure.ac: Remove fallback behavior for building
against Python.  Remove tweaking of Python include path.
Add PYTHON_CPPFLAGS and PYTHON_LIBS substitution.
(AC_TRY_LIBPYTHON):  Adjust program used in linking test.
If link is successful, set PYTHON_CPPFLAGS and PYTHON_LIBS.
Always restore CPPFLAGS and LIBS after linking test.
* configure: Regenerated.
* Makefile.in (INTERNAL_CPPFLAGS): Add @PYTHON_CPPFLAGS@.
(INSTALLED_LIBS, CLIBS): Add @PYTHON_LIBS@.
* python/python-internal.h: Adjust includes of Python .h files.

13 years agoAdd missing i18n markup in tracepoint.c:traceframe_walk_blocks
Joel Brobecker [Mon, 31 Jan 2011 03:12:06 +0000 (03:12 +0000)]
Add missing i18n markup in tracepoint.c:traceframe_walk_blocks

gdb/ChangeLog:

  * tracepoint.c (traceframe_walk_blocks): Add missing i18n markup
  in error message.

13 years agofix typo during interactive_mode check in gdb_has_a_terminal
Joel Brobecker [Mon, 31 Jan 2011 03:11:40 +0000 (03:11 +0000)]
fix typo during interactive_mode check in gdb_has_a_terminal

Discovered by Pierre Muller.

gdb/ChangeLog:

        * inflow.c (gdb_has_a_terminal): Fix typo in interactive_mode
        value test.

gdb/testsuite/ChangeLog:

        * gdb.base/interact.exp: Add extra tests that verify that
        the value of the interactive-mode setting does not change
        after the script is sourced.

13 years ago*** empty log message ***
gdbadmin [Mon, 31 Jan 2011 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***

13 years ago2011-01-31 Yao Qi <yao@codesourcery.com>
Yao Qi [Sun, 30 Jan 2011 23:16:33 +0000 (23:16 +0000)]
2011-01-31  Yao Qi  <yao@codesourcery.com>

* arm-linux-nat.c: Update calls to regcache_register_status
instead of regcache_valid_p.
* aix-thread.c: Likewise.
* i386gnu-nat.c: Likewise.

13 years agodaily update
Alan Modra [Sun, 30 Jan 2011 23:00:07 +0000 (23:00 +0000)]
daily update

13 years ago*** empty log message ***
gdbadmin [Sun, 30 Jan 2011 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***

13 years agodaily update
Alan Modra [Sat, 29 Jan 2011 23:00:05 +0000 (23:00 +0000)]
daily update

13 years agogdb/
Jan Kratochvil [Sat, 29 Jan 2011 10:30:20 +0000 (10:30 +0000)]
gdb/
Fix crash.
* valops.c (compare_parameters): Verify TYPE_NFIELDS before
touching TYPE_FIELD_ARTIFICIAL.

gdb/testsuite/
* gdb.cp/noparam.exp: New file.
* gdb.cp/noparam.cc: New file.

13 years ago * elf32-ppc.c (ppc_elf_link_hash_newfunc): Initialize has_sda_refs
Joseph Myers [Sat, 29 Jan 2011 00:12:52 +0000 (00:12 +0000)]
* elf32-ppc.c (ppc_elf_link_hash_newfunc): Initialize has_sda_refs
field.

13 years ago*** empty log message ***
gdbadmin [Sat, 29 Jan 2011 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***

13 years agodaily update
Alan Modra [Fri, 28 Jan 2011 23:00:04 +0000 (23:00 +0000)]
daily update

13 years ago* MAINTAINERS: Move myself from Responsible Maintainers to Authorized
Richard Earnshaw [Fri, 28 Jan 2011 16:32:26 +0000 (16:32 +0000)]
* MAINTAINERS: Move myself from Responsible Maintainers to Authorized
Committers.

13 years ago gdb/
Pedro Alves [Fri, 28 Jan 2011 16:18:55 +0000 (16:18 +0000)]
gdb/
* tracepoint.c (tfile_xfer_partial): If there's no traceframe
selected, don't try iterating over the traceframe's blocks.
(tfile_has_stack): If there's no traceframe selected, then there's
no stack.
(tfile_has_registers): If there's no traceframe selected, then
there's no registers.

gdb/testsuite/
* gdb.trace/tfile.exp: Test that with no traceframe selected,
there's no stack or registers.

13 years ago gdb/
Pedro Alves [Fri, 28 Jan 2011 16:00:16 +0000 (16:00 +0000)]
gdb/
* target.c (memory_xfer_partial): No need to restore shadows if we
haven't read anything.

13 years ago gdb/
Pedro Alves [Fri, 28 Jan 2011 15:42:01 +0000 (15:42 +0000)]
gdb/
* mips-tdep.c (mips_print_register): Use get_frame_register_value
and val_print_scalar_formatted.

13 years ago gdb/gdbserver/
Pedro Alves [Fri, 28 Jan 2011 13:36:32 +0000 (13:36 +0000)]
gdb/gdbserver/
* regcache.c (init_register_cache): Initialize
regcache->register_status.
(free_register_cache): Release regcache->register_status.
(regcache_cpy): Copy register_status.
(registers_to_string): Print 'x's for unavailable registers.
(supply_register): Mark the register's status valid or
unavailable, depending on whether a buffer was passed in or not.
(supply_register_zeroed): New.
(supply_regblock): Mark the registers' status valid or
unavailable, depending on whether a buffer was passed in or not.
* regcache.h (REG_UNAVAILABLE, REG_VALID): New defines.
(struct regcache): New `register_status' field.
(supply_register_zeroed): Declare.
* i387-fp.c (i387_xsave_to_cache): Zero out registers using
supply_register_zeroed, rather than passing a NULL buffer to
supply_register.
* tracepoint.c (fetch_traceframe_registers): Update comment.

13 years ago2011-01-28 Pedro Alves <pedro@codesourcery.com>
Pedro Alves [Fri, 28 Jan 2011 12:58:00 +0000 (12:58 +0000)]
2011-01-28  Pedro Alves  <pedro@codesourcery.com>

* i387-fp.c (i387_xsave_to_cache): Make passing NULL as register
buffer explicit.

13 years ago*** empty log message ***
gdbadmin [Fri, 28 Jan 2011 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***

13 years agodaily update
Alan Modra [Thu, 27 Jan 2011 23:00:05 +0000 (23:00 +0000)]
daily update

13 years ago* config/tc-rx.c (md_convert_frag): If we can't compute the target
DJ Delorie [Thu, 27 Jan 2011 22:38:32 +0000 (22:38 +0000)]
* config/tc-rx.c (md_convert_frag): If we can't compute the target
address, zero out the values stored in the object file to make
objdump's output consistent.

13 years ago gdb/
Pedro Alves [Thu, 27 Jan 2011 21:39:24 +0000 (21:39 +0000)]
gdb/
* tracepoint.c (tfile_read): New.
(tfile_open): Use it.
(tfile_get_traceframe_address): Use it.
(tfile_trace_find): Use it.
(walk_blocks_callback_func): New typedef.
(match_blocktype): New function.
(traceframe_walk_blocks): New function.
(traceframe_find_block_type): New function.
(tfile_fetch_registers, tfile_xfer_partial)
(tfile_get_trace_state_variable_value): Use
traceframe_find_block_type and tfile_read.

13 years ago*** empty log message ***
gdbadmin [Thu, 27 Jan 2011 00:00:05 +0000 (00:00 +0000)]
*** empty log message ***

13 years ago * remote-mips.c: Add internationalization mark ups. Remove
Kevin Buettner [Wed, 26 Jan 2011 23:13:22 +0000 (23:13 +0000)]
* remote-mips.c: Add internationalization mark ups.  Remove
trailing \n from already marked up strings.

13 years agodaily update
Alan Modra [Wed, 26 Jan 2011 23:00:06 +0000 (23:00 +0000)]
daily update

13 years agogdb
Tom Tromey [Wed, 26 Jan 2011 20:58:49 +0000 (20:58 +0000)]
gdb
* python/py-prettyprint.c (print_string_repr): Clear
'addressprint' option when calling val_print_string.
(print_children): Handle Val_pretty_default.  Clear 'addressprint'
option when calling val_print_string.
gdb/testsuite
* gdb.python/py-prettyprint.exp (run_lang_tests): Ensure no blank
space before string output.  Add test for "set print pretty off"
case.

13 years ago * python/python.c (gdbpy_solib_name): Use gdb_py_longest and
Tom Tromey [Wed, 26 Jan 2011 20:53:45 +0000 (20:53 +0000)]
* python/python.c (gdbpy_solib_name): Use gdb_py_longest and
GDB_PY_LL_ARG.
* python/python-internal.h (GDB_PY_LL_ARG, GDB_PY_LLU_ARG): New
macros.
(gdb_py_longest, gdb_py_ulongest): New typedefs.
(gdb_py_long_from_longest, gdb_py_long_from_ulongest)
(gdb_py_long_as_ulongest): New defines.
(gdb_py_object_from_longest, gdb_py_object_from_ulongest)
(gdb_py_int_as_long): Declare.
* python/py-value.c (valpy_lazy_string): Use gdb_py_longest,
GDB_PY_LL_ARG, gdb_py_object_from_longest.
(valpy_long): Add comment.
* python/py-utils.c (get_addr_from_python): Use
gdb_py_long_as_ulongest.  Handle overflow properly.
(gdb_py_object_from_longest): New function.
(gdb_py_object_from_ulongest): Likewise.
(gdb_py_int_as_long): Likewise.
* python/py-type.c (typy_array): Use gdb_py_int_as_long.
* python/py-symtab.c (salpy_get_pc): Use
gdb_py_long_from_ulongest.
(salpy_get_line): Use PyInt_FromLong.
* python/py-param.c (set_parameter_value): Use
gdb_py_int_as_long.
* python/py-lazy-string.c (stpy_get_address): Use
gdb_py_long_from_ulongest.
* python/py-frame.c (frapy_pc): Use gdb_py_long_from_ulongest.
* python/py-cmd.c (cmdpy_completer): Use gdb_py_int_as_long.
* python/py-breakpoint.c (bppy_set_thread): Use
gdb_py_int_as_long.
(bppy_set_task): Likewise.
(bppy_set_ignore_count): Likewise.
(bppy_set_hit_count): Likewise.
* python/py-block.c (blpy_get_start): Use
gdb_py_object_from_ulongest.
(blpy_get_end): Likewise.
(gdbpy_block_for_pc): Use gdb_py_ulongest and GDB_PY_LLU_ARG.

13 years agobinutils/
Jan Kratochvil [Wed, 26 Jan 2011 10:27:46 +0000 (10:27 +0000)]
binutils/
* dwarf.c (display_gdb_index): Support version 4, warn on version 3.

13 years ago2011-01-26 Kai Tietz <kai.tietz@onevision.com>
Kai Tietz [Wed, 26 Jan 2011 10:16:12 +0000 (10:16 +0000)]
2011-01-26  Kai Tietz  <kai.tietz@onevision.com>

        * config/tc-i386.c (md_begin): Set for x64 windows COFF target
        x86_dwarf2_return_column to 32.

13 years ago2011-01-25 Mathieu Lacage <mathieu.lacage@inria.fr>
Thiago Jung Bauermann [Wed, 26 Jan 2011 01:55:19 +0000 (01:55 +0000)]
2011-01-25  Mathieu Lacage  <mathieu.lacage@inria.fr>

PR/symtab 11766:
* gdb/objfiles.h (struct objfile) <addr_low>: New field.
* gdb/solib.c (solib_read_symbols): Check for addr_low in
equality test for objfile, initialize addr_low if needed.

13 years ago*** empty log message ***
gdbadmin [Wed, 26 Jan 2011 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***

13 years agodaily update
Alan Modra [Tue, 25 Jan 2011 23:00:05 +0000 (23:00 +0000)]
daily update

13 years ago * script.cc (script_add_extern): Rewrite to use
Ian Lance Taylor [Tue, 25 Jan 2011 18:55:24 +0000 (18:55 +0000)]
* script.cc (script_add_extern): Rewrite to use
add_symbol_reference.

13 years ago * tui/tui-regs.c (tui_register_format): Remove dead code.
Pedro Alves [Tue, 25 Jan 2011 18:18:15 +0000 (18:18 +0000)]
* tui/tui-regs.c (tui_register_format): Remove dead code.

13 years ago * printcmd.c (print_formatted): Use val_print_scalar_formatted
Pedro Alves [Tue, 25 Jan 2011 17:59:00 +0000 (17:59 +0000)]
* printcmd.c (print_formatted): Use val_print_scalar_formatted
instead of print_scalar_formatted.
(print_scalar_formatted): Don't handle 's' format strings here,
and add an assertion that we never see such format here.
* valprint.h (val_print_scalar_formatted): Declare.
* valprint.c (val_print_scalar_formatted): New.
* c-valprint.c (c_val_print): Use val_print_scalar_formatted
instead of print_scalar_formatted.
* jv-valprint.c (java_val_print): Ditto.
* p-valprint.c (pascal_val_print): Ditto.
* ada-valprint.c (ada_val_print_1): Ditto.
* f-valprint.c (f_val_print): Ditto.
* infcmd.c (registers_info): Ditto.
* m2-valprint.c (m2_val_print): Ditto.

13 years ago * m2-valprint.c (print_unbounded_array): Pass
Pedro Alves [Tue, 25 Jan 2011 17:43:29 +0000 (17:43 +0000)]
* m2-valprint.c (print_unbounded_array): Pass
value_contents_for_printing rather than value_contents, to
m2_print_array_contents.  Also pass in the value.

13 years agogdb/
Jan Kratochvil [Tue, 25 Jan 2011 17:25:12 +0000 (17:25 +0000)]
gdb/
* dwarf2read.c (dwarf2_read_index, write_psymtabs_to_index)
(save_gdb_index_command): Switch to .gdb_index version 4.

13 years ago2011-01-25 Doug Kwan <dougkwan@google.com>
Doug Kwan [Tue, 25 Jan 2011 17:14:59 +0000 (17:14 +0000)]
2011-01-25  Doug Kwan  <dougkwan@google.com>

* gold/icf.cc (get_section_contents): Always lock section's object.

13 years ago * mi/mi-main.c (get_register): Use get_frame_register_value rather
Pedro Alves [Tue, 25 Jan 2011 17:00:27 +0000 (17:00 +0000)]
* mi/mi-main.c (get_register): Use get_frame_register_value rather
than frame_register, and always pass a valid value to val_print.

13 years ago Centralize printing "<optimized out>".
Pedro Alves [Tue, 25 Jan 2011 16:26:23 +0000 (16:26 +0000)]
Centralize printing "<optimized out>".

gdb/
* valprint.h (val_print_optimized_out): Declare.
* cp-valprint.c (cp_print_value_fields): Use
val_print_optimized_out.
* jv-valprint.c (java_print_value_fields): Ditto.
* p-valprint.c (pascal_object_print_value_fields): Ditto.
* printcmd.c (print_formatted): Ditto.
* valprint.c (valprint_check_validity): Ditto.
(value_check_printable): Ditto.
(val_print_optimized_out): New.

gdb/doc/
* gdb.texinfo: s/value optimized out/optimized out/g

gdb/testsuite/
* gdb.base/frame-args.exp: Adjust.
* gdb.dwarf2/dw2-noloc.exp: Adjust.
* gdb.dwarf2/dw2-inline-param.exp: Adjust.
* gdb.dwarf2/pieces.exp: Adjust.
* gdb.opt/clobbered-registers-O2.exp: Adjust.
* gdb.opt/inline-locals.exp: Adjust.
* gdb.threads/fork-child-threads.exp: Adjust.

13 years agogdb/testsuite/ChangeLog
Ken Werner [Tue, 25 Jan 2011 16:10:28 +0000 (16:10 +0000)]
gdb/testsuite/ChangeLog

2011-01-25  Ken Werner  <ken.werner@de.ibm.com>

        * gdb.opencl/convs_casts.cl: Move program scope variables into the
        OpenCL kernel function. Add a comment as marker. Add address space
        qualifiers for the remaining program scope variables.
        * gdb.opencl/datatypes.cl: Likewise.
        * gdb.opencl/operators.cl: Likewise.
        * gdb.opencl/vec_comps.cl: Likewise.
        * gdb.opencl/convs_casts.exp: Replace gdb_test_multiple by gdb_test.
        Add breakpoint at the marker comment.
        * gdb.opencl/datatypes.exp: Likewise.
        * gdb.opencl/operators.exp: Likewise.
        * gdb.opencl/vec_comps.exp: Likewise.

13 years ago gdb/
Pedro Alves [Tue, 25 Jan 2011 15:47:58 +0000 (15:47 +0000)]
gdb/
* infcmd.c (default_print_registers_info): Allocate values so to
never pass a NULL value to val_print.

13 years ago * cp-valprint.c (cp_print_value): Treat the 'skip' local as
Pedro Alves [Tue, 25 Jan 2011 15:18:36 +0000 (15:18 +0000)]
* cp-valprint.c (cp_print_value): Treat the 'skip' local as
boolean.  Make sure to always pass a value that matches the
contents buffer to callees.  Preserve `address' for following
iterations.
* value.c (value_contents_for_printing_const): New.
(value_address): Constify value argument.
* value.h (value_contents_for_printing_const): Declare.
(value_address): Constify value argument.

13 years ago * regcache.c (struct regcache_descr): Rename
Pedro Alves [Tue, 25 Jan 2011 12:47:25 +0000 (12:47 +0000)]
* regcache.c (struct regcache_descr): Rename
sizeof_raw_register_valid_p field to sizeof_raw_register_status,
and sizeof_cooked_register_valid_p to
sizeof_cooked_register_status.
(init_regcache_descr): Adjust.
(struct regcache): Rename register_valid_p field to
register_status.
(regcache_xmalloc_1, regcache_xfree, regcache_save)
(do_cooked_read): Adjust.
(regcache_valid_p): Rename to ...
(regcache_register_status): ... this.  Adjust.
(regcache_invalidate): Adjust.
(regcache_raw_read, regcache_cooked_read, regcache_raw_write):
Adjust.
(regcache_raw_supply): Adjust.  If buf i NULL, mark the register
as unavailable, not valid.
(regcache_dump): Adjust.
* regcache.h (enum register_status): New.
(regcache_register_status): Declare.
(regcache_invalidate): Delete declaration.
* corelow.c (get_core_registers): Adjust.
* tracepoint.c (tfile_fetch_registers): Adjust.
* trad-frame.c (REG_VALUE): Rename to ...
(TF_REG_VALUE): ... this.
(REG_UNKNOWN): Rename to ...
(TF_REG_UNKNOWN): ... this.
(trad_frame_set_value, trad_frame_set_unknown): Adjust.
* mi/mi-main.c (register_changed_p): Adjust.

13 years ago * regcache.c (struct regcache_descr): Remove outdated comment.
Pedro Alves [Tue, 25 Jan 2011 12:13:20 +0000 (12:13 +0000)]
* regcache.c (struct regcache_descr): Remove outdated comment.
(init_regcache_descr): Remove sizeof_raw_register_valid_p
overallocate hack.
(regcache_xmalloc): Rename to ...
(regcache_xmalloc_1): ... this.  Add `readonly_p' parameter.
Allocate the regcache type accordingly.
(regcache_xmalloc): New as wrapper around regcache_xmalloc_1.
(regcache_xfree): Asser the source is also readonly.  Copy sizeof
cooked registers, not raw.
(regcache_dup_no_passthrough): Delete.
(get_thread_arch_regcache): Use regcache_xmalloc_1.
* h8300-tdep.c (h8300_push_dummy_call): Tweak comment to not
mention obsolete write_register_bytes.
* regcache.h (regcache_dup_no_passthrough): Delete declaration.

13 years ago Stop remote_read_bytes from handling partial reads itself.
Pedro Alves [Tue, 25 Jan 2011 11:54:00 +0000 (11:54 +0000)]
Stop remote_read_bytes from handling partial reads itself.

* remote-fileio.c: Include target.h.
(remote_fileio_write_bytes): Delete.
(remote_fileio_func_open, remote_fileio_func_write)
(remote_fileio_func_rename, remote_fileio_func_unlink): Use
target_read_memory.
(remote_fileio_func_stat): Use target_read_memory and
target_write_memory.
(remote_fileio_func_gettimeofday): Use target_write_memory.
(remote_fileio_func_system): Use target_read_memory.
* remote.c (remote_write_bytes): Make it static.
(remote_read_bytes): Don't handle partial reads here.
* remote.h (remote_read_bytes): Delete declaration.

13 years ago2011-01-25 Pedro Alves <pedro@codesourcery.com>
Pedro Alves [Tue, 25 Jan 2011 10:09:19 +0000 (10:09 +0000)]
2011-01-25  Pedro Alves  <pedro@codesourcery.com>

* server.h (decode_xfer_write): Change prototype.
* remote-utils.c (decode_xfer_write): Remove `annex' parameter,
and don't extract the annex here.
* server.c (decode_xfer_read): Remove `annex' parameter,
and don't extract the annex here.
(decode_xfer): New.
(struct qxfer): New.
(handle_qxfer_auxv, handle_qxfer_features, handle_qxfer_libraries)
(handle_qxfer_osdata, handle_qxfer_siginfo, handle_qxfer_spu)
(handle_qxfer_statictrace): New functions, abstracted out from
handle_query, and made to use the struct qxfer interface.
(handle_threads_qxfer_proper): Rename to ...
(handle_qxfer_threads_proper): ... this.
(handle_threads_qxfer): Rename to ...
(handle_qxfer_threads): ... this.  Adjust.
(qxfer_packets): New array.
(handle_qxfer): New function.
(handle_query): Use handle_qxfer.

13 years ago Simplify XML parsing a bit.
Pedro Alves [Tue, 25 Jan 2011 09:49:59 +0000 (09:49 +0000)]
Simplify XML parsing a bit.

* xml-support.h (gdb_xml_parse_quick): Declare.
* xml-support.c (gdb_xml_create_parser_and_cleanup_1): Renamed
from gdb_xml_create_parser_and_cleanup, and added `old_chain'
parameter.
(gdb_xml_create_parser_and_cleanup): Reimplement on top of
gdb_xml_create_parser_and_cleanup_1.
(gdb_xml_parse_quick): New.
* memory-map.c (parse_memory_map): Use gdb_xml_parse_quick.
* osdata.c (osdata_parse): Ditto.
* remote.c (remote_threads_info): Ditto.
* solib-target.c (solib_target_parse_libraries): Ditto.
* xml-syscall.c (syscall_parse_xml): Ditto.
* xml-tdesc.c (tdesc_parse_xml): Ditto.

13 years ago * options.h (class General_options): Accept
Ian Lance Taylor [Tue, 25 Jan 2011 06:08:47 +0000 (06:08 +0000)]
* options.h (class General_options): Accept
--no-detect-odr-violations.

13 years ago*** empty log message ***
gdbadmin [Tue, 25 Jan 2011 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***

13 years agodaily update
Alan Modra [Mon, 24 Jan 2011 23:00:05 +0000 (23:00 +0000)]
daily update

13 years ago * version.cc (version_string): Bump to 1.11.
Ian Lance Taylor [Mon, 24 Jan 2011 22:27:55 +0000 (22:27 +0000)]
* version.cc (version_string): Bump to 1.11.

13 years ago * plugin.cc (class Plugin_rescan): Define new class.
Ian Lance Taylor [Mon, 24 Jan 2011 21:48:40 +0000 (21:48 +0000)]
* plugin.cc (class Plugin_rescan): Define new class.
(Plugin_manager::claim_file): Set any_claimed_.
(Plugin_manager::save_archive): New function.
(Plugin_manager::save_input_group): New function.
(Plugin_manager::all_symbols_read): Create Plugin_rescan task if
necessary.
(Plugin_manager::new_undefined_symbol): New function.
(Plugin_manager::rescan): New function.
(Plugin_manager::rescannable_defines): New function.
(Plugin_manager::add_input_file): Set any_added_.
* plugin.h (class Plugin_manager): define new fields rescannable_,
undefined_symbols_, any_claimed_, and any_added_.  Declare
Plugin_rescan as friend.  Declare new functions.
(Plugin_manager::Rescannable): Define type.
(Plugin_manager::Rescannable_list): Define type.
(Plugin_manager::Undefined_symbol_list): Define type.
(Plugin_manager::Plugin_manager): Initialize new fields.
* archive.cc (Archive::defines_symbol): New function.
(Add_archive_symbols::run): Pass archive to plugins if any.
* archive.h (class Archive): Declare defines_symbol.
* readsyms.cc (Input_group::~Input_group): New function.
(Finish_group::run): Pass input_group to plugins if any.
* readsyms.h (class Input_group): Declare destructor.
* symtab.cc (add_from_object): Pass undefined symbol to plugins if
any.

13 years ago * configure.tgt (mips*-*-elf): New; just like mips*-*-*, but
Kevin Buettner [Mon, 24 Jan 2011 21:34:19 +0000 (21:34 +0000)]
* configure.tgt (mips*-*-elf): New; just like mips*-*-*, but
with remote-mips.o added to gdb_target_obs.
* Makefile.in (ALL_TARGET_OBS): Add remote-mips.o.