package/imx-mkimage: update hash

Due to an update in the tar logic, see commit 6e2f5d0254 (download/git: fix
transform regexp for older tar versions ) - This hash needs to be updated.

Fixes:

  http://autobuild.buildroot.net/results/7c63ab1188a45d4684e159456f561a4e7c39e612/

Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ltrace: fix visibility of Config.in comment

The BR2_PACKAGE_LTRACE option has some architecture dependencies, but
those architecture dependencies are not taken into account for the
Config.in comment.

To fix this, this commit introduces a BR2_PACKAGE_LTRACE_ARCH_SUPPORTS
hidden boolean that gets used by both the BR2_PACKAGE_LTRACE option
and the Config.in comment.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

ltrace: remove bogus comment in Config.in file

In commit dfaa18af00dfcff71a0159adaafb0880e58fa6a1 ("ltrace: disable
on mips/mipsel"), ltrace was disabled on mips/mipsel due to build
issues, and a comment was added in the Config.in file to explain that
even though ltrace has mips/mipsel support, it isn't enabled because
it doesn't build.

Then, in commit d23cce19c299e3010ba2dca84ab4ad35eff3cdbb ("ltrace:
enable for mips/mipsel"), the build of ltrace on mips/mipsel was
re-enabled, because it has been fixed upstream.

However, the comment in the Config.in comment was not removed in this
commit. Due to this, we have a comment that says "we don't allow
enabling ltrace on mips/mipsel" and the line right below precisely
allows to enable ltrace on mips/mipsel.

Fix this inconsistency by removing the no longer valid comment.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gst1-plugins-bad: fix typo preventing use of the netsim plugin

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Revert "arch/arm: add cortex-m7 core"

This reverts commit 43884e7f5011cbd70a9a17bfd87041953cfa74ee, which
was intended for the next branch, not master.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

arch/arm: add cortex-m7 core

Nothing fancy, just a plain Cortex-M, armv7-M core...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libpam-radius-auth: add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

znc: add mandatory dependency on threads

Threads support is mandatory since version 1.7.0:
https://github.com/znc/znc/commit/582cd635f5a047761b1052a40088ab86e62fffc1

Fixes:
 - http://autobuild.buildroot.net/results/cc56c7dbee594056288296398772ef9e22846299

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libpciaccess: add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libpcap: add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libosip2: add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/transmission: remove BR2_PACKAGE_TRANSMISSION_REMOTE

Commit 6e223241e1bb58a27eb890291f9f5c1fcc6a0818 ("Add Transmission
package"), which added the transmission package, introduced a
BR2_PACKAGE_TRANSMISSION_REMOTE Config.in option, supposedly matching
the --enable-remote/--disable-remote transmission option.

However, transmission as of version 2.33 packaged by this initial
commit, did not have a --enable-remote/--disable-remote option, and it
was apparently never part of transmission.

Therefore, this commit removes this useless option. Since the
transmission-remote tool is automatically built when the daemon is
enabled, the Config.in.legacy handling selects
BR2_PACKAGE_TRANSMISSION_DAEMON.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/transmission: fix inotify configure option

The configure option is really called --with-inotify:
https://github.com/transmission/transmission/blob/2.9x/configure.ac#L211

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/transmission: fix systemd support

Patch 0006-libsystemd.patch backports an upstream commit which renames
the systemd configure option.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

zmqpp: fix build with or1k and gcc < 6

Use CONFIG variable to disable optimizations when or1k and gcc < 6 are
detected otherwise set CONFIG to release or debug depending on
BR2_ENABLE_DEBUG

Fixes:
 - http://autobuild.buildroot.net/results/523e58eefba7ef23a09ef53160da22190ccbb098

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libogg: add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

liboauth: add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libnfnetlink: add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libnfc: add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libnetfilter_log: add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libnetfilter_cttimeout: add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libnetfilter_cthelper: add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libmpd: add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libmodplug: add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libmodbus: add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

mbedtls: security bump to version 2.7.3

Extract from release announcement:

- (2.9, 2.7, 2.1) Fixed an issue in the X.509 module which could lead
to a buffer overread during certificate validation. Additionally, the
issue could also lead to unnecessary callback checks being made or to
some validation checks to be omitted. The overread could be triggered
remotely, while the other issues would require a non DER-compliant
certificate to be correctly signed by a trusted CA, or a trusted CA with
a non DER-compliant certificate. Found by luocm. Fixes #825.

- (2.9, 2.7, 2.1) Fixed the buffer length assertion in the
ssl_parse_certificate_request() function which could lead to an
arbitrary overread of the message buffer. The overreads could be caused
by receiving a malformed algorithms section which was too short. In
builds with debug output, this overread data was output with the debug
data.

- (2.9, 2.7, 2.1) Fixed a client-side bug in the validation of the
server's ciphersuite choice which could potentially lead to the client
accepting a ciphersuite it didn't offer or a ciphersuite that could not
be used with the TLS or DTLS version chosen by the server. This could
lead to corruption of internal data structures for some configurations.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gst1-plugins-bad: update plugin licenses

Update several of the licenses annotated in the gst1-plugins-bad.mk file.

1. Specify GPL-2.0 in license info.
* All of the *.[ch] that specify GPL also specify version 2 or later.

2. Remove GPL from audiovisualizers.
* Changlog notes move from GPL to LGPL. (2015-04-25)
* docs/plugins/inspect/plugin-audiovisualizers.xml claims "LGPL".
* All *.[ch] files under ./gst/audiovisualizers say "GNU Library General Public License".

3. Add GPL to yadif.
* Changelog notes that yadif is "GPL". (2013-02-07)
* docs/plugins/inspect/plugin-yadif.xml claims "GPL".
* All *.[ch] files under ./gst/yadif say "GNU General Public License" except for one "GNU Library General Public License".

4. Remove UNKNOWN from fdk_aac.
* docs/plugins/inspect/plugin-fdkaac.xml claims "LGPL".
* All *.[ch] files under ./ext/fdkaac say "GNU Lesser" or "GNU Library General Public License".

5. Add BSD-2c to dtls.
* docs/plugins/inspect/plugin-dtls.xml claims "BSD".
* All *.[ch] files under ./gst/dtls have BSD-2c text.

6. Add BSD-2c to openh264.
* Changelog notes that openh264 is "BSD-2". (2014-10-03)
* docs/plugins/inspect/plugin-openh264.xml claims "BSD".
* All *.[ch] files under ./ext/openh264 have BSD-2c text.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: add myself for libnss

Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

qt5wayland: fix hardwareintegration/client/xcomposite-egl compile

Add upstream patch, fixes [1]:

  ../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglwindow.cpp: In member function 'void QtWaylandClient::QWaylandXCompositeEGLWindow::createEglSurface()':
  ../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglwindow.cpp:124:82: error: invalid conversion from 'Window {aka long unsigned int}' to 'EGLNativeWindowType {aka void*}' [-fpermissive]
       m_surface = eglCreateWindowSurface(m_glxIntegration->eglDisplay(), m_config, m_xWindow,0);
                                                                                    ^~~~~~~~~
  In file included from ../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglclientbufferintegration.h:57:0,
                   from ../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglwindow.h:46,
                   from ../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglwindow.cpp:40:
  .../host/arm-buildroot-linux-musleabihf/sysroot/usr/include/EGL/egl.h:265:31: note:   initializing argument 3 of 'void* eglCreateWindowSurface(EGLDisplay, EGLConfig, EGLNativeWindowType, const EGLint*)'
 EGLAPI EGLSurface EGLAPIENTRY eglCreateWindowSurface(EGLDisplay dpy, EGLConfig config,

[1] http://autobuild.buildroot.net/results/9bcc76ed9e23c0d525f20b4da7f3bb5efe3083d4

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gdb: actually disable gdbserver if BR2_PACKAGE_GDB_SERVER is unset

The gdb configure script is given --enable-gdbserver when
BR2_PACKAGE_GDB_SERVER is set, but it is not given --disable-gdbserver
when BR2_PACKAGE_GDB_SERVER is unset.

gdb gdb/configure.ac defaults to enabling gdbserver in "native"
(host=target) cases, which is always the case when buildroot builds a
gdb which runs on the target hardware. The gdbserver will overwrite
BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY gdbserver, if any.

Fix that by passing --disable-gdbserver when BR2_PACKAGE_GDB_SERVER is
unset.

Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

nfs-utils: update homepage link

The linux-nfs project switched to a new homepage. Update the help text
link.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

faketime: add patch to disable -Werror

faketime currently doesn't build on host machines that use gcc 8.x due
to stricter checks done by gcc, and the fact that it is built with
-Werror.

As a simple stop-gap measure, this commit patches the faketime
Makefile to not use -Werror anymore.

The actual fixes for the gcc 8.x issues have been submitted upstream
at https://github.com/wolfcw/libfaketime/pull/161, but disabling
-Werror is a much smaller fix.

Also, it is worth mentioning that removing -Werror makes the existing
patch 0001-Disable-the-non-null-compare-warning-error.patch (which was
just disabling one specific warning). We nonetheless keep this patch
around as it is a backport from upstream.

Fixes:

  http://autobuild.buildroot.net/results/bd223dfa1c4baa68e427d4941bd2e9917e22da84/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libcurl: security bump to version 7.60.0

Drop upstream patch.

This release fixes the security issues listed below.

CVE-2018-1000300: curl might overflow a heap based memory buffer when
closing down an FTP connection with very long server command replies.

  https://curl.haxx.se/docs/adv_2018-82c2.html

CVE-2018-1000301: curl can be tricked into reading data beyond the end
of a heap based buffer used to store downloaded content.

  https://curl.haxx.se/docs/adv_2018-b138.html

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libnss: backport upstream patch to fix build with gcc 8.x

This commit backports upstream patch
https://github.com/nss-dev/nss/commit/f0ce70989526fc9a0223398c99ea0d09777ea5df
to our libnss package to fix the build with gcc 8.x.

Fixes:

  http://autobuild.buildroot.net/results/1ca35171200286fa032b24606aaa50de6a2d449e/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libkcapi: depends on BR2_TOOLCHAIN_HAS_SYNC_4

Since commit
https://github.com/smuellerDD/libkcapi/commit/4d0a5c235536b5f679e6a9b0c847f56c9cfc3835,
libkcapi uses __sync_add_and_fetch_4 and __sync_sub_and_fetch_4

Fixes:
 - http://autobuild.buildroot.net/results/de5e136ea433633d836bff1d2ac1d3b461391b83

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

imx8mqevk: readme: Write the SoC name in capital letters

Use "i.MX8MQ" (in capital letters) for the SoC name for better
readability.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

imx8mqevk: readme: Put switch configuration for SD card boot

Improve the documentation by adding the configuration of SW801 and SW802
switches for SD card boot.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/mx53loco: Adjust comment to reflect the real kernel version

The kernel used is from 4.16 version, so adjust the comment.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

exim: do not link buildconfig with $(LIBS)

The existing patch 0001-Build-buildconfig-for-the-host.patch changes
the exim build system to use the host compiler to build the
"buildconfig" program instead of the cross-compiler.

However, it still uses $(LIBS) which lists the target libraries to
link with, which shouldn't be used. Since buildconfig doesn't use any
library beyond the C library, we can simply drop using $(LIBS).

This will fix build failures of exim on Fedora 28, where libnsl is no
longer provided by the C library, causing build failures such as:

/usr/bin/gcc buildconfig.c
/usr/bin/ld: cannot find -lnsl

Fixes:

  http://autobuild.buildroot.net/results/ac78fe18657558b3c12c03c08bf1081d7c06ca85/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/llvm: fix host-llvm build with GCC8

This patch fixes the build of lli for host-llvm when using GCC 8.

It was taken from llvm-5.0 package for Fedora 28.

Link to bug: https://bugzilla.redhat.com/show_bug.cgi?id=1540620

Fixes:

http://autobuild.buildroot.net/results/824c70e982d8ec7e518cf4db058767df42db6b04/

Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux: don't override HOSTCC for kconfig

Kconfig uses either pkg-config or hard-coded /usr/include paths to find
the ncurses or ncursesw library. If ncursesw is found, it will include
<ncursesw.h>. Since Buildroot's host-ncurses doesn't install a .pc file,
and linux.mk anyway doesn't pass the pkg-config options to find the host
pkg-config files, Kconfig will always find the system's ncursesw.h.

However, since commit dde090c299 (linux: fix passing of host CFLAGS and
LDFLAGS) HOST_LDFLAGS is passed to the linux build system. Thus, if
host-ncurses was already built before 'make linux-menuconfig' is called,
the build will pick up libncurses from the host directory, which is NOT
widechar. Thus, two different ncurses configurations are mixed into the
final mconf program. This will result in serious breakage in the
rendering of the menus (lots of @ and question mark characters).

As a workaround (suggested by Yann), don't pass HOST_CFLAGS and
HOST_LDFLAGS when running kconfig commands. For kconfig, we should never
need host packages anyway. This way, the kconfig calls will always use
the system's ncurses and never our host-ncurses.

Note that the same problem could pop up for other kconfig packages as
well if we ever pass HOST_CFLAGS/HOST_LDFLAGS to them. We could force
HOSTCC=$(HOSTCC) directly in kconfig-package. However, for now there
are no other packages that exhibit this problem, so this can be
revisited when they do.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: David De Grave <david.degrave@essensium.com>
Cc: Scott Fan <fancp2007@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/clang: bump to version 5.0.2

5.0.2  is API and ABI compatible with 5.0.0 and 5.0.1 and includes
mitigations for CVE-2017-5715 (Spectre Variant 2) for X86 and MIPS.

Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/llvm: bump to version 5.0.2

5.0.2  is API and ABI compatible with 5.0.0 and 5.0.1 and includes
mitigations for CVE-2017-5715 (Spectre Variant 2) for X86 and MIPS.

Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/asterisk: Fix issues building without SSL

Fixes
http://autobuild.buildroot.net/results/7d0/7d069dd5629e406cecd17bacfa818e7c8e6b2064/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gst1-plugins-bad: rework license type construction

Use "GST1_PLUGINS_BAD_LICENSE := $(GST1_PLUGINS_BAD_LICENSE), xxxx" construct
so that the list of licenses is presented as a comma-separated list.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

clamav: add patch to fix build failure caused by lack of libcurl

When json-c is enabled but libcurl is disabled, clamav tries to build
the clamsubmit program, which fails with:

  CC       clamsubmit.o
clamsubmit.c:6:23: fatal error: curl/curl.h: No such file or directory
 #include <curl/curl.h>

This is due to an incorrect curl-config detection logic, leading to
/bin/curl-config being present making the configure script believe
that curl is available, even when --without-libcurl is explicitly
passed.

This commit adds a patch, submitted upstream, which fixes this
problem.

Fixes:

  http://autobuild.buildroot.net/results/c43d2ebd8ab30016969d642dbd71c297dc5f6bab/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

clamav: reformat patches as Git-formatted patches

ClamAV is using Git upstream
(https://github.com/Cisco-Talos/clamav-devel), so it makes sense to
use Git-formatted patches.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

zstd: fix host headers installation

If host-zstd builds when $(HOST_DIR)/include has not been created yet,
the install-includes target does not create this directory. Instead, the
install command copies the headers over $(HOST_DIR)/include, thus
creating a regular file instead of a directory. This leads to the
following installation failure:

Installing includes
install: cannot create directory ‘.../host/usr/include/’: File exists
Makefile:166: recipe for target 'install-pc' failed
make[1]: *** [install-pc] Error 1

Add a patch to fix that.

Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

cifs-utils: unconditionally disable PIE

PIE support in Buildroot should be enabled via the global option
BR2_RELRO_FULL option, and not done on a per-package basis, therefore
PIE should unconditionally be disabled in the cifs-utils package.

This has the added side-effect that it works around a binutils bug on
SPARC causing the linker to segfault when PIE is enabled:

sparc-linux-gcc -Wall -Wextra -D_FORTIFY_SOURCE=2 -fpie -pie -Wl,-z,relro,-z,now -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os    -o mount.cifs mount.cifs.o mtab.o resolve_host.o util.o  -lcap-ng
collect2: fatal error: ld terminated with signal 6 [Aborted], core dumped

This issue will reappear when we start testing BR2_RELRO_FULL in the
autobuilders, but in the mean time it avoids the problem.

Fixes:

  http://autobuild.buildroot.net/results/a5342890f39bdccae1324e7d3dbe0eab1aad28e5/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

lynx: add patch to fix static link issue

The lynx package incorrectly uses target LDFLAGS to build a host tool,
which causes a problem when we do a statically link build for the
target, on a host machine that doesn't support static linking.

A simple patch fixes the problematic makefile, and it has been
submitted upstream on the project mailing list.

Fixes:

  http://autobuild.buildroot.net/results/38ba2531eeeb4a7985eddd2df8bfaf0b56e6a687/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

wget: security bump to version 1.19.5

Fixes CVE-2018-0494: cookie injection vulnerability.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/download/file: remove set -x

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/download/file: fix file:// protocol handling

Since the rework of the download infrastructure, the "file" download
helper gets passed an URL that starts with file://, but forgets to
strip it before passing it to "cp", causing a failure as the "cp"
program isn't prepared for file paths starting with file://. This is
fixed by stripping the file:// at the beginning of the URL.

In addition, the path passed to cp lacked a slash between the
directory path and the filename part of the url. This is fixed by
adding a slash at the appropriate places.

Fixes the following build failure when the "file" download method is
used:

cp: cannot stat 'file:///home/angelo/DEV/TOOLCHAINSarmv7-eabihf--glibc--bleeding-edge-2017.11-1.tar.bz2': No such file or directory

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/acl: fix install

Do not overwrite destination file if it exists.

Simliar to bug #10986.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: mzweerspenko+bugzilla@gmail.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/attr: fix install

Do not overwrite destination file if it exists.

Fixes: #10986
Reported-by: mzweerspenko+bugzilla@gmail.com
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: mzweerspenko+bugzilla@gmail.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain/buildroot: fix default of C library choice

The BR2_TOOLCHAIN_UCLIBC symbol doesn't exist, it was meant to be
BR2_TOOLCHAIN_BUILDROOT_UCLIBC.

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/kconfig: Add missing target to README.buildroot

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

woff2: fix build on m68k

Same issue on woff2 than in some other packages such as lcdapi: see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79509

Fixes:
 - http://autobuild.buildroot.net/results/6c97a08e6ca2e914d54fbb525b3f0bb90023ef07

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

cups-filters: fix avahi dependency

avahi support requires avahi-client, which needs avahi-daemon and dbus

Fixes:
 - http://autobuild.buildroot.net/results/5c326bb56199000eb0e53a4d0f3c6c13be71cda0

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/jamvm: restrict on what MIPS procs are allowed

jamvm uses deprecated opcodes to store/load words from the FPU
coprocessor registers, and in so doing, expects those registers
to be 32-bit.

Thus, restrict the conditions under which jamvm is available
under mips.

Fixes:
    http://autobuild.buildroot.org/results/f76/f76e10e4c1ce25b42fb2e5d2012adf2eaf1b2fe1/
    http://autobuild.buildroot.org/results/162/162d0e41dc9bc6d6f6594ccee0cb4217067fc71f/
    ...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/jamvm: move arch dependency to a symbol

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/znc: python support depends on icu

Upstream checks for icu when build with python support:
https://github.com/znc/znc/commit/4fe4a45dd62411ba9ede04750ca44f071e7d6cbb

Fixes
http://autobuild.buildroot.net/results/9e4/9e44159820789f1d25efcbd24318b0e05e132371/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

snort: fix build on sparc v8

Add patch to remove -mcpu=v9 before checking sparc architecture

Fixes:
 - http://autobuild.buildroot.net/results/59625daa154e3136171dcb89bdc3b8b31dc85021

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libkrb5: disable rpath

The default rpath value for krb5 is /usr/lib. On some hosts this might
confuse the build time linker as it looks for target libraries in the
host /usr/lib directory.

Should fix:
http://autobuild.buildroot.net/results/6df/6df84ed325ddd92248741d2f4737423b1b999489/
http://autobuild.buildroot.net/results/049/049f5147288b418402b6e5a4181eff4d426c8d7a/
http://autobuild.buildroot.net/results/432/432d5d0295f77cd34b78e70e8b4b7d77ef19ae3c/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/xen: force location of init scripts

The Xen configure scripts looks at the build host to decide where to
install the Sys-V startup scripts, and that location differs between
various distros.

Force the location.

Fixes:
    http://autobuild.buildroot.org/results/869/869829ab086e824d164c5c5ec7f087ed83993be6/
    http://autobuild.buildroot.org/results/336/3360e5a9e3d007b4ed77345b5fe93b2dacb6ad49/
    http://autobuild.buildroot.org/results/29e/29e308ce3cc9c83497ba1c1f98fcda3f48fd03c4/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rauc: add workaround for older kernel headers

Fixes:
    http://autobuild.buildroot.org/results/621/621587906bd2bb27c43b6fcbb051d75f20e32e7c/
    http://autobuild.buildroot.org/results/52c/52ca760f0227075ca988754bb9eb8df0ea3e1563/
    ...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Andrey Yurovsky <yurovsky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libcap: only install shared version

If BR2_SHARED_LIBS is set, only install shared version of library
(continue to build both libraries through all target as there is no
libcap.so target but only a libcap.so.$(VERSION).$(MINOR))

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: Add myself to support/kconfig/

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/apr-util: fix ldap detection

configure checks if ldap_set_rebind_proc takes 2 or 3 arguments
http://svn.apache.org/viewvc/apr/apr-util/tags/1.6.1/build/apu-conf.m4?revision=1812528&view=markup#l370

It uses the macro APR_TRY_COMPILE_NO_WARNING which adds -Werror to
treat all warnings as errors when gcc is used:
http://svn.apache.org/viewvc/apr/apr/tags/1.6.3/build/apr_common.m4?revision=1812527&view=markup#l504

In some buildroot configs a compiler warning occurs during this check:
http://autobuild.buildroot.net/results/241/241ed78b93ce86c859e175530fa485711ff61615//apr-util-1.6.1/config.log

/home/rclinux/rc-buildroot-test/scripts/instance-1/output/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include/features.h:218:5:
 error: #warning requested reentrant code, but thread support was disabled [-Werror=cpp]
cc1: all warnings being treated as errors

Due to this warning 'ac_cv_ldap_set_rebind_proc_style' is set to two
instead of three leading to a build error later on. This patch forces
ac_cv_ldap_set_rebind_proc_style=three to be inline with openldap which
fixes
http://autobuild.buildroot.net/results/241/241ed78b93ce86c859e175530fa485711ff61615/

This solution was inspired by a discussion on the fink mailinglist:
https://sourceforge.net/p/fink/mailman/message/31720482/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-cython: fix indentation

Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/67844444
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

log4cplus: add C++11 dependencies

log4cplus uses std::future which is a C++11 feature affected by the gcc
bug 64735

Fixes:
 - http://autobuild.buildroot.net/results/4f4e9ed5dd5bad76eeee5d151e958f22603615b3

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: add myself to some packages

Add myself to lcms2, liblockfile, libnetfilter_conntrack,
libnetfilter_queue and whois

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux-headers: bump 4.{9, 14, 16}.x series

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux: bump default to version 4.16.8

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qt5cinex: fix download

The Buildroot dl-wrapper tries to download
Qt5_CinematicExperience_%22rpi_%221.0.tgz, which fails, so this commit
fixes the archive name by removing useless double quotes.

Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/clang: link libclang against libLLVM.so

libclang.so is statically linking against all LLVM static libraries
instead of linking dynamically against libLLVM.so.

This patch fixes this problem by setting LLVM_LINK_LLVM_DYLIB to ON.

Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-websockets: backport fix for upstream issue #350

Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

go: security bump to version 1.10.2

This bump contains many bug fixes, as well as the following security
issue, patched in Go 1.10.1:

CVE-2018-7187: The "go get" implementation in Go 1.9.4, when the
-insecure command-line option is used, does not validate the import path
(get/vcs.go only checks for "://" anywhere in the string), which allows
remote attackers to execute arbitrary OS commands via a crafted web
site.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

go: honor building with V=1 for debugging purposes

Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

go: add self to developers to get cc-ed for build failures

Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

go: cleanup cross-compilation support

Now that we fixed cross-compilation in the go package, cleanup the build
to remove the workaround added in 60c5c96ae109dcea48e0997b5e6e6645ac9b86
"package/go: Build host tools with host CC". We only need a single pass
to build the go toolchain.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/go: fixing host go cross compilation

Actually if GOHOSTOS == GOOS || GOHOSTARCH == GOARCH the go build system assume
it's not cross compiling and uses the same toolchain for both the host and the
target. This commit adds a patch to enable the explicit
GO_ASSUME_CROSSCOMPILING in go build system and updates to go package
accordingly.

Fixes:
http://autobuild.buildroot.net/results/3636b1ac5756a782fd7578186508aaf9d105e3e9/
http://autobuild.buildroot.net/results/25790dca7e19527bb360d7dfb325cd9cfc3b56cc/
and many more.

References:
https://github.com/golang/go/issues/25177
https://golang.org/cl/112156

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

docs/manual: using a branch name as FOO_VERSION does not work

For various reasons, we've always suggested users to avoid using a
branch as version string for their packages, because it does not work
as a they would expect:

  - it is not reproducible, because the branch may change between two
    builds that are done at different times;

  - it does not even follow the branch, as Buildroot anyway generates
    a local tarball, which it will reuse on subsequent builds.
    Furthermore, since we fetch and not pull, any existing local branch
    is not updated.

Yet, until recently, using a branch name would just work (with the
above limitations): the git tree was cloned, the branch checked out,
and the tarball created.

But with the advent of the git caching, using a branch name does not
work anymore. Indeed, we now do a git-fetch, and that does not create
a local master branch. So we can't check out master, because it does
not exist locally. And for other branches, as noticed above, the local
branch does not get udpated to the remote one.

Furthermore, the local branches are only created by chance, again as a
side-effect of trying to fetch the "special refs".

So, we can't say that we reliably support the use of a branch name.

Update the manual to state that using a branch does not work. Remove
the 'stable' example, as it looked like the name of a stable branch;
instead, replace it with a version string that ressemble a tag.

Fix the layout of the manual by making the version examples an actual
bulleted list.

Note: the above is only entirely true for git. For Mercurial, CVS and
subversion, the status may be mixed, but nonetheless, using branches is
still a bad idea, if at least because it is not reproducible, and
because Buildroot does not even follow the branch. So, we do not
differentiate between the various SCMs, and just flatly state that using
a branch name is not supported.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

strace: disable (again) mpers for musl

It turns out that mpers support in strace still does not play nicely
with musl libc. As explained in commit 7892a778b (package/strace:
disable libmpers with musl toolchains) headers mixup causes gcc header
to be included, instead of the musl one, resulting in conflicting types.
Commit 1088372941 (strace: bump to version 4.21) incorrectly enabled
mpers for musl. Revert that.

Fixes:
http://autobuild.buildroot.net/results/345/3452419498c074ca66f36f0f87263fa10662ac86/

Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dahdi-linux: use package's DL_DIR

Since we reworked the download infra, the location for packages to look
for their files has moved to a per-package directory.

For systems where a download of the dahdi firmware files was already
done in a version prior to the rework, all was working fine so far,
because the files were indeed in the main DL directory.

But for systems where the download is first attempted after the rework,
the files are not found (even though they are properly downloaded).

Fix the location where dahdi-linux looks for its extra files.

Reported-by: ***** ***** <zyama.abel@mail.ru>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: ***** ***** <zyama.abel@mail.ru>
Cc: Carlos Santos <casantos@datacom.ind.br>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/asterisk: use package's DL_DIR

Since we reworked the download infra, the location for packages to look
for their files has moved to a per-package directory.

For systems where a download of the asterisk sound files was already
done in a version prior to the rework, all was working fine so far,
because the files were indeed in the main DL directory.

But for systems where the download is first attempted after the rework,
the files are not found (even though they are properly downloaded).

Fix the location where asterisk looks for its extra files.

Reported-by: ***** ***** <zyama.abel@mail.ru>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: ***** ***** <zyama.abel@mail.ru>
Cc: Carlos Santos <casantos@datacom.ind.br>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/dependencies: check that PATH does not contain CWD

A person on IRC reported a build failure with the util-linux package,
looking like this:

for I in uname26 linux32 linux64        ; do \
cd /home/aep/consulting/chargery/tracker/output/target/usr/bin && ln -sf setarch $I ; \
done
[...]
/bin/sh: line 1: ./ln: cannot execute binary file: Exec format error
/bin/sh: line 1: ./ln: cannot execute binary file: Exec format error
/bin/sh: line 1: ./ln: cannot execute binary file: Exec format error

The issue was an empty path in the PATH variable, which means "current
working directory", causing a "ln" binary built by util-linux for the
target to be used instead of the system-provided "ln".

We already check a number of things in the PATH and LD_LIBRARY_PATH
variables in support/dependencies/dependencies.sh, but we were not
checking that PATH did not contain an empty path.

This commit fixes that and takes this opportunity to simplify the test
code for PATH and LD_LIBRARY_PATH.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Thomas: improve commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

docs/website: update news.html for 2018.05-rc1

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Update for 2018.05-rc1

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

CHANGES: additional updates for 2018.05-rc1

 - Add some explanations about the Blackfin removal, as suggested by
   Yann E. Morin.

 - Add list of resolved issues.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

CHANGES: update in preparation for 2018.05-rc1

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mplayer: remove package

This package causes numerous build errors. During the last hackaton it
was decided to remove this package:
http://lists.busybox.net/pipermail/buildroot/2018-April/217514.html

Fixes
http://autobuild.buildroot.net/results/bda/bda461391c9e02e313fda887b75099e619527a7a/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/tovid: switch from mplayer to mpv

The mplayer package will be removed from buildroot, tovid can use mpv
instead. Support for mpv was added upstream:
https://github.com/tovid-suite/tovid/commit/05cbce2ea130e50f6bf1599816dd0d7bf3ace91a

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/tovid: bump version

Support for mpv is not present in the tarball version 0.35.2, therefore
we bump this package to current git master branch to prepare the switch
from mplayer to mpv.

Added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libplayer: remove mplayer support

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Revert "libcrossguid: bump to version 0.2.2"

This reverts commit dededf0ff2177e5aeb051db25e178bb951debce5.

Building the only package depending on libcrossguid, Kodi, breaks due to
this bump:

/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/utils/
StringUtils.cpp: In static member function ‘static std::__cxx11::string
StringUtils::CreateUUID()’:
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/utils/
StringUtils.cpp:1194:10: error: ‘GuidGenerator’ does not name a type
   static GuidGenerator guidGenerator;
          ^~~~~~~~~~~~~
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/utils/
StringUtils.cpp:1195:15: error: ‘guidGenerator’ was not declared in this
scope
   auto guid = guidGenerator.newGuid();
               ^~~~~~~~~~~~~

This happens due to changes in libcrossguid:
https://github.com/graeme-hill/crossguid/blob/master/README.md

"This is version 0.2 of CrossGuid. If you all already using CrossGuid and
your code uses GuidGenerator then you are using version 0.1."

Even Kodi master branch has no support for libcrossguid-0.2.x yet so we
revert the bump.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

uclibc: fix ldconfig for x86_64

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

log4cplus: bump to version 2.0.0

- LICENSE has been updated to add threadpool license (BSD-like)
- Add hash for license file

Fixes:
 - http://autobuild.buildroot.net/results/a4690fd3e46354776f6d6addd17226622c5f4961

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/znc: bump version to 1.7.0

Increased minimum gcc version to 4.8 as mentioned in the Changelog:
https://wiki.znc.in/ChangeLog/1.7.0

Removed all patches:
- 0001 was applied upstream:
https://github.com/znc/znc/commit/483074cbf82a48a3ff01838fcbaec00553d1882c

- 0002 is not needed anymore after upstream switched Csocket to a git
  submodule:
https://github.com/znc/znc/commit/9166e6ed40f0c7a85eee0d024b12510c13863f55#diff-8a725997e024d92d67b33a90cffb8342

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libkrb5: bump to version 1.16.1

Update hash for license file (update to year)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>