package/socat: Fix TABDLY, CSIZE and CRDLY shifts for PowerPC

As can be seen in linux/arch/powerpc/include/uapi/asm/termbits.h are
defined as (note that those are octal numbers):

\#define TABDLY 00006000
\#define CSIZE 00001400
\#define CRDLY 00030000

which gives shifts of 10, 8 and 12. Adjust socat.mk accordingly to
reflect that difference.

Signed-off-by: Mark Hinds <zoronic@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

autofs: bump to version 5.1.3

Drop upstream patches.

Cc: Jonathan Ben Avraham <yba@tkos.co.il>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

swupdate: switch to local config librt dependency

Upstream rejected[1] the patch added in commit 6a1aa4e2daf0 (swupdate: fix
build with older glibc). Instead of carrying this patch going forward, make
librt an extra library dependency in the Buildroot local swupdate .config.

This solution is somewhat less optimal than the patch, because it always adds
librt regardless of whether SURICATTA_HAWKBIT is enabled. In theory we could
add a test for (BR2_PACKAGE_JSON_C && BR2_PACKAGE_LIBCURL), which are the
SURICATTA_HAWKBIT dependencies, and edit .config at build time. But this adds
much complexity for little gain.

[1] https://groups.google.com/forum/?hl=en#!topic/swupdate/77QWIka27es

Cc: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/scripts: fix shebang with bash

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/dependencies: check PATH does not carry a \n

... otherwise it fails spectacularly as soon as PATH is referenced in a
package rule (i.e. very soon, fortunately):

    >>> host-lzip 1.18 Downloading
    /bin/bash: -c: line 0: unexpected EOF while looking for matching `"'
    /bin/bash: -c: line 1: syntax error: unexpected end of file

Fixes # 9886.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ciro Santilli <ciro.santilli@gmail.com>
[Thomas: fix typo in message, use tabs for indentation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sngrep: fix ncurses wchar detection

This commit adds an upstream patch to the sngrep package that fixes the
detection of wchar capable ncurses.

Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: add upstream patch to fix gdbm compile issue

This patches fixes

gdbmopen.c:35:40: error: unknown type name 'blksize_t'
 compute_directory_size (GDBM_FILE dbf, blksize_t block_size,

Fixes
  http://autobuild.buildroot.net/results/592/59278fb8681d474883e6551df5173edd806b16fa/

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/bdwgc: re-add fix for pthread detection on uclinux platforms

Fixes
http://autobuild.buildroot.net/results/d63/d63ee2d03421cc671455be553ab35ada7ff78267/
http://autobuild.buildroot.net/results/d8f/d8f97fd92cd971a0d125f983765ef27c5ac87acb/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gauche: fix build with uClibc

As gauche bundles bdwgc, it hit the same uclibc build issue fixed in commit
9b04ae71c5e4c (package/bdwgc: fix uclibc build after bump to 7.6.0). Apply the
upstream bdwgc fix for that.

Fixes:
http://autobuild.buildroot.net/results/ebc/ebc70579a94d260fecf05fe4150eebcc59d3b5fb/
http://autobuild.buildroot.net/results/e1b/e1b2ad89787c345cf8817f6d8436ff52a151c5a6/
http://autobuild.buildroot.net/results/f39/f396b996a59db79f7a0926aec49c488c3a2797a0/

Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Hiroshi Kawashima <kei-k@ca2.so-net.ne.jp>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

.gitlab-ci.yml: sync with latest defconfig additions

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board/orangepi: add basic support for orangepi-zero board

This patch adds basic support for orangepi-zero board.
Board support package includes the following components:

- mainline kernel v4.11
- mainline u-boot v2017.03
- extra kernel config options: spidev, spi nor flash, wifi
- dts patches to enable SPI NOR and spidev

More details about this board are available here:
- http://linux-sunxi.org/Orange_Pi_Zero

Note that at the moment networking is not supported right out of the box.
Ethernet submission to mainline kernel is a work in progress, see the
latest dwmac-sun8i branches at https://github.com/montjoie/linux

On-board SDIO WiFi chip XR819 is supported by off-the-tree wireless
driver available at https://github.com/fifteenhex/xradio

Changes from v1:

* Send patch using proper subject
* Update xr819 kernel dts patch: add compatible property

[Peter: fix s/PC/Zero/ typo]
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: fix name of config variable

In 4c10eedc1 (systemd: enable required kernel features), we added
setting a few required kernel features to ensure systemd works.

However, there was a typo for one of the variables: CONFIG_TMPFS_XATTR
was written as CONFIG_TMPFS_POSIX_XATTR, which does not exist (and never
ever existed, at least not since 2.6.12)...

Reported-by: Michael Heinemann <posted@heine.so>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Michael Heinemann <posted@heine.so>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

x11r7: xf86-input-tslib: bump to version 1.0.0

As the update from 0.0.X to 1.0.0 suggests, this is a major update. The driver
uses X11's touch API now, instead of motion with button emulation. Furthermore
it supports multitouch when a recent version of tslib is installed.

It is not backwards compatible for very old versions of the X server. See
https://github.com/merge/xf86-input-tslib/releases for some details.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/qemu: bump to the latest kernel version

Xtensa patches no longer required, the make target name changed
to Image. The Qemu binary for OpenRisc was renamed upstream.
I removed the x86->x86_64 symlink, independent files preferred.

Defconfig               Kernel  Qemu            Network Status
--------------------------------------------------------------
aarch64_virt            4.11.3   2.9.0           YES     OK
arm_versatile           4.11.3   2.9.0           YES     OK
arm_versatile_nommu     4.4.70   2.9.0           YES     OK
arm_vexpress            4.11.3   2.9.0           YES     OK
m68k_mcf5208            4.11.3   2.9.0           YES     OK
m68k_q800               4.11.3   q800-v2.4.0     NO (2)  OK
microblazebe            4.11.3   2.9.0           YES     OK
microblazeel            4.11.3   2.9.0           YES     OK
mips32r2el_malta        4.11.3   2.9.0           YES     OK
mips32r2_malta          4.11.3   2.9.0           YES     OK
mips32r6el_malta        4.11.3   2.9.0           YES     OK
mips32r6_malta          4.11.3   2.9.0           YES     OK
mips64el_malta          4.11.3   2.9.0           YES     OK
mips64_malta            4.11.3   2.9.0           YES     OK
mips64r6el_malta        4.11.3   2.9.0           YES     OK
mips64r6_malta          4.11.3   2.9.0           YES     OK
nios2-10m50             4.11.3   2.9.0           NO      OK
or1k                    4.11.3   2.9.0           NO      OK (5)
ppc_g3beige             4.11.3   2.9.0           YES     OK
ppc_mpc8544ds           4.11.3   2.9.0           YES     OK
ppc_virtex_ml507        4.9.6    2.9.0           NO      OK (3)
ppc64_pseries           4.11.3   2.9.0           YES     OK
sh4                     4.9.6    2.9.0           YES     OK (4)
sh4eb                   4.9.6    2.9.0           NO (1)  OK (4)
sparc_ss10              4.11.3   2.9.0           YES     OK
sparc64_sun4u           4.11.3   2.9.0           YES     OK
sparc_sun4u             4.11.3   2.9.0           YES     OK
x86                     4.11.3   2.9.0           YES     OK
x86_64                  4.11.3   2.9.0           YES     OK
xtensa_lx60             4.11.3   2.9.0           YES     OK
xtensa_lx60_nommu       4.11.3   2.9.0           YES     OK

(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Kernel oops with 4.11.3 on boot
(4) - System is extremely slow with 4.11.3, needs further investigation
(5) - Qemu binary got renamed to qemu-system-or1k

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

swupdate: fix build with older glibc

Add -lrt that is needed for clock_gettime() with glibc before 2.17.

Fixes:
http://autobuild.buildroot.net/results/034/0345814c0b0023e124992974c0600bdda0824dbf/

Cc: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libuv: bump to version 1.12.0

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libupnpp: needs gcc >= 4.9

After bumping libupnpp from version 0.15.1 to 0.15.2 compilation fails
for toolchains using GCC 4.7:

```
libupnpp/control/discovery.cxx: In constructor 'UPnPClient::UPnPDeviceDirectory::UPnPDeviceDirectory(time_t)':
libupnpp/control/discovery.cxx:338:5: error: 'yield' is not a member of 'std::this_thread'
```

Before version 0.15.2, libupnpp used sched_yield() which was replaced by
`std::this_thread::yield()` in the new version.

Looking at the `<thread>` header file of the PowerPC toolchain [1] from
the autobuilder shows that `yield()` is only enabled if
`_GLIBCXX_USE_SCHED_YIELD` is defined:

```
    /// yield
    inline void
    yield() noexcept
    { __gthread_yield(); }
```

Note, that `__gthread_yield()` inlines to a call to `sched_yield()`:

```
static inline int
__gthread_yield (void)
{
  return __gthrw_(sched_yield) ();
}
```

This macro is only defined if GCC was built with `--enable-libstdcxx-time`,
which is obviously not the case for the affected toolchains. For GCC 4.7 and
below this option defaults to no, which means `sched_yield()` is not enabled
though it is be available.

The issue was discussed on stackoverflow [2]. In GCC 4.9.0 the issue has
been fixed, by automatically enabling `sched_yield()` on platforms that are
known to support them.

Therefore, we update the dependency to GCC 4.9.

Fixes:
http://autobuild.buildroot.net/results/506/50670d8119b4fbd26585d3d9bd646adb1d904dbe/
http://autobuild.buildroot.net/results/8b0/8b021648a073bde25dd6936ed1ea1e39977bf89b/
http://autobuild.buildroot.net/results/b6d/b6d7437e1cf8cf0b3726395401ac4ebd9af2833b/
http://autobuild.buildroot.net/results/0bf/0bf84f61a72a65a75c5fd0a787680f483cfead26/
.. and more.

[1] http://autobuild.buildroot.org/toolchains/tarballs/powerpc-ctng_e500v2-linux-gnuspe.tar.xz
[2] https://stackoverflow.com/a/12961816

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/scripts: fix shebang with python

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/xf86-input-tslib: enable static build

since tslib now supports static builds the dependency on !BR2_STATIC_LIBS
can be removed from xf86-input-tslib too.

Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/tslib: enable statically linked building

tslib can be configured to be built statically linked. So let's add this option.

tslib is quite configurable and each module can be selected to be built into
the static build. This configuration includes the hardware independent filter
modules (obviously), and the Linux evdev input module.

This results in a configuration that fully supports multitouch in any
combination.

Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 4.{4, 9, 11}.x series

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default version to 4.11.4

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

kmod: add patch to fix build failure with old gcc versions

When building with old gcc versions (such as gcc 4.3), the current
version of kmod fails with:

shared/util.c:52: error: expected identifier or '(' before 'do'
shared/util.c:52: error: expected identifier or '(' before 'while'

This is due to a use of the internal assert_cc() macro outside of a
function, while this macro is defined for old gcc versions in a way that
cannot be used outside functions.

This wasn't noticed by the autobuilders because we don't have such old
target compilers. On the host side, we have some autobuilder instances
with such old gcc versions, but host-kmod is only used by the linux
package, which is never tested by the autobuilders.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gnuradio: needs boost regex module

Since
https://git.gnuradio.org/cgit/gnuradio.git/commit/cmake/Modules/GrBoost.cmake?id=27fbbf22e359e8ec4a04399f3dc139f8c25031cb
gnuradio needs the boost regex module.

Fixes
http://autobuild.buildroot.net/results/d71/d71278032c083c2c4b1bf20b81629225f8965c6e/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libhdhomerun: fix legal-info

Fixes
http://autobuild.buildroot.net/results/8ea/8eaa8c4027bca26d5a21da83f67358a43627f1b2/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ffmpeg: bump version to 3.3.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.2.x series

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

refpolicy: add ability to set default state.

SELinux requires a config file in /etc/selinux which controls the state
of SELinux on the system.

This config file has two options set in it:
SELINUX which set's the state of selinux on boot.
SELINUXTYPE which should equal the name of the policy.  In this case, the
default name is targeted.

This patch adds:
- A choice menu on Config.in that allows the user to select a default
  SELinux state.

- A basic config file that will be installed to
  target/etc/selinux and will set SELINUX= to the selected state.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Acked-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
 - rename option to BR2_PACKAGE_REFPOLICY_POLICY_STATE
 - qstrip the variable
 - drop unused REFPOLICY_NAME variable.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

refpolicy: add ability to specify policy version

Refpolicy by default will build the highest version supported. This may
cause older kernels to not load the policy.

This patch adds a custom policy version string which is defaulted to 30,
which is the highest supported as of today.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Acked-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
 - rename option to BR2_PACKAGE_REFPOLICY_POLICY_VERSION
 - use qstrip to remove double quotes]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

refpolicy: new package

The patch is for adding selinux reference policy (refpolicy).
It is a complete SELinux policy that can be used as the system policy
for a variety of systems and used as the basis for creating other policies.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Acked-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
 - add entry to DEVELOPERS file
 - remove redundant dependencies
 - drop unused REFPOLICY_PYINC option
 - use SPDX tag for license
 - minor formatting fixes.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/stella: bump version to 4.7.3

Removed patch applied upstream:
https://github.com/stella-emu/stella/commit/be2f6f5b64266f4d68af6a2236bd4b59a7e6638d

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imx-uuc: fix start-stop-daemon stop failure

The daemon service script associated with imx-uuc failed to stop the daemon
since the PID of the process wasn't stored at start time.

Adding -m option allowed to create the uuc.pid file as expected.

Signed-off-by: Alexandre Esse <alexandre.esse.dev@gmail.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ratpoison: new package

Tested with:
nitrogen6sx_defconfig

Signed-off-by: Mario J. Rugiero <mrugiero@gmail.com>
[Thomas:
 - formatting fixes
 - license is GPL-2.0+, not GPL-2.0
 - explicitly disable xft/xkb support]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cmake: bump version to 3.8.2

cmake depends on rhash, but host-cmake doesn't. This is because we use
the bundled dependencies for host-cmake but not for target.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rhash: new package

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas:
 - fix indentation
 - don't use post install target hook.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ejabberd: bump to version 17.04

There are new dependencies: erlang-p1-jiffy, erlang-p1-oauth2,
erlang-p1-stun, erlang-p1-tls, erlang-p1-utils, erlang-p1-xmpp

as well as two host dependencies on erlang-p1-utils and
erlang-p1-xmpp. Otherwise the compilation via rebar fails.

4 patches have been refreshed and a new patch have been introduced to
tell rebar to use host dependencies instead of trying to download them.
Hopefully this patch could be drop in ejabberd 17.06. Missing SoB in
patches have been added as well.

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

erlang-p1-oauth2: New package

OAuth2 library for Erlang
https://github.com/processone/p1_oauth2

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xserver_xorg-server: fix gcc5+ build with version 1.14.7

Fixes

sdksyms.c:311:15: error: expected expression before »,« token
     (void *) &,                                                  /* ../../include/os.h:96 */

by backporting an upstream patch, sdksyms.c is generated by
hw/xfree86/sdksyms.sh which is broken when used with gcc5+.

Problem was found while testing
http://patchwork.ozlabs.org/patch/762102/

using this defconfig

BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XSERVER_XORG_SERVER_V_1_14=y
BR2_PACKAGE_XDRIVER_XF86_INPUT_TSLIB=y

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/icu: needs host gcc >= 4.8

Fixes
http://autobuild.buildroot.net/results/2b3/2b3a9be1780857db8827ea70df9d8699116a5df7/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/dovecot: bump version to 2.2.30.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain/toolchain-common.in: adjust BR2_TOOLCHAIN_HAS_GCC_BUG_64735 for GCC 7

As GCC 7 is now available in Buildroot, update the definition for
BR2_TOOLCHAIN_HAS_GCC_BUG_64735 as the bug #64735 is fixed in GCC 7.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mesa3d: bump version to 17.0.7

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

botan: disable AltiVec if the CPU does not support it

Botan compiles all PowerPC code with AltiVec support and only determines
at runtime whether the CPU even supports it. If the target CPU uses the
older SPE extensions, though, this is too late; since SPE and AltiVec
are incompatible, gcc aborts the compilation. This patch explicitly
disables AltiVec support unless BR2_POWERPC_CPU_HAS_ALTIVEC is defined

Signed-off-by: Tobias Blass <tobias.blass@rohde-schwarz.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-cross: bump to version 1.1.5

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gnu-efi: add arm/aarch64 support

We need BR2_ARM_CPU_HAS_ARM, otherwise build for cortex-m4 breaks with
"target CPU does not support ARM mode".

We only enable arm/aarch64 support for now, mips support is broken:
test-pkg/br-mips64-n64-full/build/gnu-efi-3.0.5/lib/mips64el/setjmp.S:40:
 Error: opcode not supported on this processor: mips64 (mips64) `ext $v0,$v0,29,1'

Tested by test-pkg using this defconfig

BR2_PACKAGE_GNU_EFI=y

with the following results:

                armv5-ctng-linux-gnueabi [ 1/49]: OK
              armv7-ctng-linux-gnueabihf [ 2/49]: OK
                        br-aarch64-glibc [ 3/49]: OK
                           br-arcle-hs38 [ 4/49]: SKIPPED
                            br-arm-basic [ 5/49]: OK
                  br-arm-cortex-a9-glibc [ 6/49]: OK
                   br-arm-cortex-a9-musl [ 7/49]: OK
                   br-arm-cortex-m4-full [ 8/49]: SKIPPED
                             br-arm-full [ 9/49]: OK
                    br-arm-full-nothread [10/49]: OK
                      br-arm-full-static [11/49]: OK
                            br-bfin-full [12/49]: SKIPPED
                   br-i386-pentium4-full [13/49]: OK
                br-i386-pentium-mmx-musl [14/49]: OK
                       br-m68k-5208-full [15/49]: SKIPPED
                      br-m68k-68040-full [16/49]: SKIPPED
                    br-microblazeel-full [17/49]: SKIPPED
                 br-mips32r6-el-hf-glibc [18/49]: SKIPPED
                      br-mips64-n64-full [19/49]: SKIPPED
                 br-mips64r6-el-hf-glibc [20/49]: SKIPPED
                      br-mipsel-o32-full [21/49]: SKIPPED
                          br-nios2-glibc [22/49]: SKIPPED
                      br-openrisc-uclibc [23/49]: SKIPPED
               br-powerpc-603e-basic-cpp [24/49]: SKIPPED
             br-powerpc64le-power8-glibc [25/49]: SKIPPED
               br-powerpc64-power7-glibc [26/49]: SKIPPED
                  br-powerpc-e500mc-full [27/49]: SKIPPED
                             br-sh4-full [28/49]: SKIPPED
                        br-sparc64-glibc [29/49]: SKIPPED
                         br-sparc-uclibc [30/49]: SKIPPED
                    br-x86-64-core2-full [31/49]: OK
                          br-x86-64-musl [32/49]: OK
                          br-xtensa-full [33/49]: SKIPPED
                     i686-ctng-linux-gnu [34/49]: OK
                          linaro-aarch64 [35/49]: OK
                              linaro-arm [36/49]: OK
             mips64el-ctng_n32-linux-gnu [37/49]: SKIPPED
             mips64el-ctng_n64-linux-gnu [38/49]: SKIPPED
        powerpc-ctng_e500v2-linux-gnuspe [39/49]: SKIPPED
                     sourcery-arm-armv4t [40/49]: OK
                            sourcery-arm [41/49]: OK
                     sourcery-arm-thumb2 [42/49]: OK
                         sourcery-mips64 [43/49]: SKIPPED
                           sourcery-mips [44/49]: SKIPPED
                          sourcery-nios2 [45/49]: SKIPPED
                             sourcery-sh [46/49]: SKIPPED
                         sourcery-x86-64 [47/49]: OK
                            sourcery-x86 [48/49]: OK
           x86_64-ctng_locales-linux-gnu [49/49]: OK
49 builds, 27 skipped, 0 build failed, 0 legal-info failed

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gnu-efi: bump version to 3.0.5

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-pyicu: bump version to 1.9.7

Fixes build with ICU 59.1, updated broken URL in Config.in.

Fixes
http://autobuild.buildroot.net/results/d32/d32b7c98323e2a25a378143795583716bd5b74a9/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/tslib: bump version to 1.11

Release notes for the curious:
   https://github.com/kergoth/tslib/blob/master/NEWS

Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libgcrypt: security bump to version 1.7.7

Fix possible timing attack on EdDSA session key.

https://lists.gnupg.org/pipermail/gnupg-announce/2017q2/000406.html

Add upstream provided SHA1 hash.

Switch to https download for better corporate firewall compatibility.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libass: bump version to 0.13.7

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/intel-microcode: bump version to 20170511

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/inadyn: bump version to 2.1

Switched to tarball provided by upstream, autoreconf is not needed
anymore.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/imlib2: bump version to 1.4.10

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/imagemagick: bump version to 7.0.5-10

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/igmpproxy: bump version

Last bump dates back to April 2016, time for current git HEAD.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/icu: bump version to 59.1

According to the release notes "Compiler support for C++11 is now
required for building the ICU libraries.
GCC: version 4.8 and later has been tested."

Added corresponding dependencies and reverse dependencies.
Removed patch 0006 applied upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

memcached: bump version to 1.4.37

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/iputils: bump version to s20161105

Bump package to latest tagged release, fix typo and check-package
errors.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/hiawatha: fix build when c++ support is disabled

Fixes
http://autobuild.buildroot.net/results/c04/c04ff29b83c020573add597c355c57a6d9c9761d/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/iprutils: bump version to 2.4.14.1

Removed patches applied upstream:

0001-iprutils-Don-t-use-gettext.patch
https://sourceforge.net/p/iprdd/iprutils/ci/4512cfb915b492e9eed65f7b9f72fc1c1bd097c2/

0002-configure.ac-use-pow-instead-of-matherr-for-libm-che.patch
https://sourceforge.net/p/iprdd/iprutils/ci/d7cfe35b9706da357814d4bdd21563396733753c/

0003-iprlib-fixes-for-compatibility-with-musl.patch
https://sourceforge.net/p/iprdd/iprutils/ci/ed9da50d114ea5e97f3cf599fb7b305e0cec18d6/

Autoreconf is not needed anymore, added upstream hashes, switched _SITE
to https.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/iperf3: bump version to 3.1.7

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libhdhomerun: bump version to 20161117

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/exiv2: disable on musl

Musl build is broken:

/home/buildroot/build/instance-0/output/build/exiv2-910f3507795e1930ae216c9febee0bf9a88e99c0/src/actions.cpp:2052:32:
 error: 'PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP' was not declared in this scope

According to http://www.openwall.com/lists/musl/2017/02/20/3
the define is not available on musl.

Fixes
http://autobuild.buildroot.net/results/283/28334a8a0b23c7c8260023b9a3aa15e8dd7613d0/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ffmpeg: add optional support for alsa-lib

ffmpeg has optional support for alsa as input and/or output device:
http://git.videolan.org/?p=ffmpeg.git;a=blob;f=configure;h=23823e3b7012d847b614bd43316fb614676bedb2;hb=refs/heads/release/3.3#l2987

Problem was found while fixing
http://autobuild.buildroot.net/results/7ba/7ba485532fcab74928246a8f95dba7e5eea9d4a5/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openldap: bump version to 2.4.45

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

alsa-lib: bump version to 1.1.4.1

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libiio: bump version to 0.10

Patch 0001 already included in this release:
  https://github.com/analogdevicesinc/libiio/commit/913c2cc740d60450e91e066cf38f5654936a6015

Patch 0002 already included in this release:
  https://github.com/analogdevicesinc/libiio/commit/6e5a40566ee44694b186d4c2cbcf5f8690d8bba4

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gcc: allow gcc 7.1 for microblaze architecture

Add patch from gcc upstream master to fix an issue.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gcc: add upstream patch to fix build of GCC6 with GCC7

Building host-gcc-initial with GCC7 on the host fails due to the
comparison of a pointer to an integer in ubsan_use_new_style_p, which
is forbidden by ISO C++:

ubsan.c:1474:23: error: ISO C++ forbids comparison between pointer and
integer [-fpermissive]
       || xloc.file == '\0' || xloc.file[0] == '\xff'

Backported from:
https://gcc.gnu.org/viewcvs/gcc?view=revision&revision=239971

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libldns: bump version to 1.7.0

Commit https://git.nlnetlabs.nl/ldns/commit/host2str.c?id=f7b3a9700e91f8e46477f335c5aaac7c6cdd8acb
added compatability with openssl 1.1.0 but, at the same time, breaks
build without openssl:

./host2str.c:1934:74: error: unknown type name ‘BIGNUM’
 ldns_print_bignum_b64_line(ldns_buffer* output, const char* label, const BIGNUM* num)

This bump makes openssl a mandatory dependency to circumvent the
problem, we do not gain much by leaving out crypto support in a
sensitive area like dns. The only package using libldns, freeswitch,
selects openssl as well, so we have no use case for having libldns
without openssl support.

--disable-dane-verify is needed until we bump our openssl to 1.1.x.,
this fixes the following configure error:

checking for SSL_get0_dane... no
configure: error: OpenSSL does not support offline DANE verification
(Needed for the DANE-TA usage type).  Please upgrade OpenSSL to version
>= 1.1.0 or rerun with --disable-dane-verify or --disable-dane-ta-usage

Removed patches applied upstream:

0001-bugfix-548-Double-free-for-answers-4096.patch
https://git.nlnetlabs.nl/ldns/commit/?h=release-1.7.x&id=2853eb352b4461e98f2926ace4ea3810cedf4167

0002-whitespace-bug-in-ldns-read-zone.patch
https://git.nlnetlabs.nl/ldns/commit/?h=release-1.7.x&id=d6037a22fbedb8ef3a22de4107e4eaa36840865b

0003-let-doxyparse-output-manpage-generation-issues.patch
https://git.nlnetlabs.nl/ldns/commit/?h=release-1.7.x&id=168ee09a4bf184947798c3ee3ac99b6651470d64

0004-Comment-out-debugging-remnants.patch
https://git.nlnetlabs.nl/ldns/commit/?h=release-1.7.x&id=a0a943d504debb05ce4d62ea81c2d218a6cc8727

0005-Remove-manpage-content-nondeterminicity-warnings.patch
https://git.nlnetlabs.nl/ldns/commit/?h=release-1.7.x&id=a56e48856d519d12f1ef600848f335615467f147

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/exiv2: fix gettext detection, part II

It seems getting the gettext stuff right on all platforms is not that
easy, this patch bumps exiv2 to include all gettext (and pthreads)
patches applied upstream.

To reproduce the problem gettext has to be built before exiv2 so we
make gettext an optional dependency when NLS support is used.

Fixes
http://autobuild.buildroot.net/results/a56/a56c8a8a4c76b7c359ca7f5252be93fd70c6a4c1/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/exiv2: fix pthread detection

This commit fixes an error during configure:

-- Check if compiler accepts -pthread
CMake Error: TRY_RUN() invoked in cross-compiling mode, please set the
 following cache variables appropriately:
   THREADS_PTHREAD_ARG (advanced)

Patch ported from librtlsdr:
https://git.busybox.net/buildroot/commit/?id=4c6eace6f756d15ae9639a503c9245d1e7fb12a9

Fixes
http://autobuild.buildroot.net/results/0f9/0f985993a0c0076f027cfe25bb13d6b85c644c0d/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/exiv2: needs threads

Exiv2 itself depends on threads, not only with xmp support.

Follow-up patch for http://patchwork.ozlabs.org/patch/770813/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/doxygen: add upstream patch fixing segfault

Backport an upstream patch fixing a segfault in xmlgen [1].

[1] https://github.com/doxygen/doxygen/pull/555

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/doxygen: bump version to 1.8.13, switch to cmake

Doxygen switched to cmake with release 1.8.10:
http://www.stack.nl/~dimitri/doxygen/manual/changelog.html#log_1_8_10

and added support for flex 2.6.0 with release 1.8.11:
http://www.stack.nl/~dimitri/doxygen/manual/changelog.html#log_1_8_11

Fixes
http://autobuild.buildroot.net/results/ba1/ba1444709523c59393aaaa3710e9933bafacc6b5/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/erlang-jiffy: set version in jiffy.app.src

Fixes:
http://autobuild.buildroot.net/results/5c0/5c045a517ccdc97244a4cfca54465dc8d5fcc717

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

systemd: add upstream security fix

Fixes CVE-2017-9217: remote DoS (daemon crash) via a crafted DNS response with
an empty question section.

Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/hiawatha: bump version to 10.6

Changed _SITE to https.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/hans: bump version to 1.0

Added sha256 hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/guile: bump version to 2.0.14

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gssdp: bump version to 1.0.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gsl: bump version to 2.3

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/graphite2: bump version to 1.3.10

Added sha256 hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/granite: bump version to 0.4.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gqrx: bump version to 2.6.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gptfdisk: bump version to 1.0.1

Added sha256 hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gnuradio: bump version to 3.7.11

Removed patches applied upstream:

0002-fix_cmake_3_5_0_build_failure.patch
https://github.com/gnuradio/volk/commit/9aa0f07693053d44aaaad8e54dd5250909705c02

0003-fix_compilation_in_gcc-6.patch
https://github.com/gnuradio/gnuradio/commit/a1cf11937665392bcfa223a5095ff903eb44c69b

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gnuplot: bump version to 5.0.6

Added sha256 hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/hwloc: bump version to 1.11.7

Added md5 & sha256 hashes, removed patch applied upstream:
https://github.com/open-mpi/hwloc/commit/f08f4629f93e927e10143eaf6378d2619aa27954

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/hdparm: bump version to 9.52, add myself to DEVELOPERS

Added sha256 hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS: Add Martin Bark for package/connman

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/connman: bump version to 1.34

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nodejs: bump version to 8.0.0

See https://nodejs.org/en/blog/release/v8.0.0/

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ipsec-tools: add security patch to fix CVE-2015-4047

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ipsec-tools: fix build error with newer flex versions

Fixes
http://autobuild.buildroot.net/results/5c1/5c1e80d4dd57dac73345e08702af4c3fbc55f8e0/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ipsec-tools: allow autoreconf

Upstream release is broken w.r.t autoreconf, patch 0002 fixes it.
Needed to prepare for upcoming patch to fix linking against newer
flex versions.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ncurses: Copy terminfo for 'screen-256color' terminal

Tmux uses 256 color version of 'screen' terminfo by default, so copy
corresponding file to support that usecase.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ncurses: Copy terminfo for 'dumb' terminal

Definition of 'dumb' terminal is required to be able to call 'top -b'
from 'procps-ng'.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/armadillo: bump version to 7.900.1

Changed upstream URL to https, use .xz instead of .gz tarball.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libev: bump version to 4.24

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>