Gustavo Zacarias [Mon, 2 May 2016 15:21:31 +0000 (12:21 -0300)]
harfbuzz: bump to version 1.2.7
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Mon, 2 May 2016 12:21:22 +0000 (09:21 -0300)]
ntp: security bump to version 4.2.8p7
Fixes:
CVE-2016-1551 - Refclock impersonation vulnerability, AKA:
refclock-peering
CVE-2016-1549 - Sybil vulnerability: ephemeral association attack, AKA:
ntp-sybil - MITIGATION ONLY
CVE-2016-2516 - Duplicate IPs on unconfig directives will cause an
assertion botch
CVE-2016-2517 - Remote configuration trustedkey/requestkey values are not
properly validated
CVE-2016-2518 - Crafted addpeer with hmode > 7 causes array wraparound
with MATCH_ASSOC
CVE-2016-2519 - ctl_getitem() return value not always checked
CVE-2016-1547 - Validate crypto-NAKs, AKA: nak-dos
CVE-2016-1548 - Interleave-pivot - MITIGATION ONLY
CVE-2015-7704 - KoD fix: peer associations were broken by the fix for
NtpBug2901, AKA: Symmetric active/passive mode is broken
CVE-2015-8138 - Zero Origin Timestamp Bypass, AKA: Additional KoD Checks
CVE-2016-1550 - Improve NTP security against buffer comparison timing
attacks, authdecrypt-timing, AKA: authdecrypt-timing
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Mon, 2 May 2016 12:21:08 +0000 (09:21 -0300)]
samba4: bump to version 4.4.3
Fixes a few regressions from the previous security bump.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Waldemar Brodkorb [Tue, 5 Apr 2016 11:16:17 +0000 (13:16 +0200)]
opencv: fix compile issues
The first patch from Debian fixes following autobuild failure:
http://autobuild.buildroot.net/results/
eda5c6c43da40a342e0f545a348d2f865eb5ccf2/
Tested with ARM build without a regression.
The second patch fixes musl arm autobuild failure:
http://autobuild.buildroot.net/results/
6a397de789c809984b851a304078e26b2ac58974/
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sun, 1 May 2016 21:47:30 +0000 (18:47 -0300)]
linux-headers: bump 3.2.x series
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Naour [Sun, 1 May 2016 21:22:08 +0000 (23:22 +0200)]
luajit: fix host installation
Packages installed for the host should have their prefix set to
$(HOST_DIR)/usr, and therefore not use DESTDIR at installation time.
Using PREFIX=/usr DESTDIR=$(HOST_DIR) is wrong, and leads for example to
luajit.pc containing prefix=/usr, which means pkg-config returns
incorrect results for host-luajit.
This patch fixes the luajit package to conform to this rule.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: rewrite commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Mon, 18 Apr 2016 11:53:06 +0000 (12:53 +0100)]
php-zmq: bump version to 1.1.3
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Mon, 18 Apr 2016 11:53:05 +0000 (12:53 +0100)]
php-imagick: bump version to 3.4.1
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Mon, 18 Apr 2016 11:53:04 +0000 (12:53 +0100)]
php-geoip: bump version to HEAD of master on GitHub
Related: https://bugs.php.net/bug.php?id=71083
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Jörg Krause [Fri, 29 Apr 2016 07:56:58 +0000 (09:56 +0200)]
mtd: install header files to staging directory
These header files are required by swupdate.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Jörg Krause [Sun, 1 May 2016 09:28:03 +0000 (11:28 +0200)]
crda: fix build with GCC 6
Building crda with GCC 6 fails because of all compiler warnings are treated as
errors. Disable the compiler option '-Werror':
keys-gcrypt.c:94:32: error: ‘keys’ defined but not used [-Werror=unused-const-variable=]
static const struct key_params keys[] = {
^~~~
cc1: all warnings being treated as errors
Add a patch to drop '-Werror' from CFLAGS.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Jörg Krause [Sun, 1 May 2016 09:18:08 +0000 (11:18 +0200)]
fdk-aac: fix build with GCC 6
GCC 6 defaults to -std=gnu++14 instead of -std=gnu++98. The C++11 standard does
not allow "narrowing conversions" which is why building fdk-aac with GCC 6
fails:
libAACenc/src/aacEnc_rom.cpp:661:1: error: narrowing conversion of '2180108801u' from 'unsigned int' to 'FIXP_DBL {aka long int}' inside { } [-Wnarrowing]
Use '-std=gnu++98' as suggested by "Porting to GCC 6" [1].
[1] https://gcc.gnu.org/gcc-6/porting_to.html
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sun, 1 May 2016 13:34:47 +0000 (10:34 -0300)]
imlib2: security bump to version 1.4.9
It already includes the fixes for CVE-2016-3994 and CVE-2011-5326 so
drop the patches, and additionally fixes:
CVE-2016-4024 - integer overflow in imlib2, which result in insufficient
heap allocation.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Frank Hunleth [Sun, 1 May 2016 15:58:07 +0000 (11:58 -0400)]
syslinux: fix boot hang when host-gcc is 5.3
Syslinux uses the host version of gcc to build to bootloader. On systems
with gcc 5.3, this results in a bootloader that hangs. This issue has
been addressed in upstream syslinux, but an official release has not
been made yet. This commit adds the upstream patch to fix the issue.
Most likely fixes bug #8866.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Jörg Krause [Sun, 1 May 2016 17:19:49 +0000 (19:19 +0200)]
package/mpd: bump to version 0.19.15
Drop patches applied upstream:
- 0001: notify: Don't use constexpr on Haiku
- 0002: notify: use "constexpr" only with glibc
Renumber remaining patches.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 29 Apr 2016 13:18:56 +0000 (10:18 -0300)]
toolchain-external: remove Sourcery PowerPC toolchains
These are running long on the teeth - the bundled (e)glibc versions
are very old with several security bugs, they don't work reliably with
-Os and have several build failures related to internal compiler
errors such as:
http://autobuild.buildroot.net/results/fe7/
fe7bdba5faf199275aedea2918705b5d19d228bf/
http://autobuild.buildroot.net/results/935/
935ac42c30ed893939c06c077534f060aed80e9a/
http://autobuild.buildroot.net/results/a47/
a476af82c8fe4a279117314b278b08af9a08fe54/
http://autobuild.buildroot.net/results/cae/
cae720b5096be2672b4dc1311ae3fc4ed06a3b53/
The situation will not provide, and will in fact get worse with older kernel
headers precluding modern package versions and the old gcc version doing as
well so remove them.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- remove no longer needed comment in liquid-dsp Config.in file, as
noticed by Romain Naour.
- add Config.in.legacy options, as noticed by Romain Naour.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Naour [Sat, 30 Apr 2016 21:10:25 +0000 (23:10 +0200)]
toolchain-external: bump CodeSourcery MIPS to 2016.06-8
Add hash for the toolchain sources.
Runtime tested with Qemu with qemu_mips_malta_defconfig
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Naour [Sat, 30 Apr 2016 21:10:24 +0000 (23:10 +0200)]
toolchain-external: bump CodeSourcery AMD64 to 2015.11-139
>From getting-started.pdf:
- Linker bug fix.
- Fix CVE 2015-7547 getaddrinfo.
- Breakpoint in non-existent file bug fix.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Naour [Sat, 30 Apr 2016 19:41:32 +0000 (21:41 +0200)]
toolchain-external: bump CodeSourcery NiosII to 2015.11-130
>From getting-started.pdf:
- DWARF signed LEB128 encoding fix
- Fix CVE 2015-7547 getaddrinfo
- Breakpoint in non-existent file bug fix
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Christian Stewart [Sun, 1 May 2016 07:39:10 +0000 (03:39 -0400)]
rtl8821au: bump to 4c298b
Includes numerous stablity and cleanup passes by ulli-kroll.
A hash file is also added, as it was missing before.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Jörg Krause [Sun, 1 May 2016 07:29:35 +0000 (09:29 +0200)]
toolchain-external: add GCC 6.x option
Commit
519d83bfa0442439026db4e71e605a5c1347e566 adds support for GCC
6. Add an GCC 6.x option for external toolchains, too.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Pieter Smith [Sun, 24 Apr 2016 21:15:24 +0000 (23:15 +0200)]
barebox: support auxiliary config build
Adds support to build barebox with an auxiliary config.
This is useful for building an SPL (Secondary Program Loader) in
addition to the traditional TPL (Tertiary Program Loader). The
Beaglebone Black for example has two barebox configurations:
- am335x_defconfig builds the full barebox bootloader with device
tree
- am335x_mlo_defconfig builds the smaller MLO bootloader that loads
the full barebox bootloader from the eMMC or SD card.
Tested with the following defconfig:
# architecture
BR2_arm=y
BR2_cortex_a8=y
BR2_ARM_EABIHF=y
# system
BR2_TARGET_GENERIC_HOSTNAME="beaglebone"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW=y
# filesystem
BR2_PACKAGE_AM33X_CM3=y
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
# bootloader
BR2_TARGET_BAREBOX=y
BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="am335x"
BR2_TARGET_BAREBOX_IMAGE_FILE="images/barebox-am33xx-beaglebone.img"
BR2_TARGET_BAREBOX_CUSTOM_ENV=y
BR2_TARGET_BAREBOX_CUSTOM_ENV_PATH="board/beaglebone/barebox/barebox.env"
BR2_TARGET_BAREBOX_AUX=y
BR2_TARGET_BAREBOX_AUX_BOARD_DEFCONFIG="am335x_mlo"
BR2_TARGET_BAREBOX_AUX_IMAGE_FILE="images/barebox-am33xx-beaglebone-mlo.img"
# kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_USE_DEFCONFIG=y
BR2_LINUX_KERNEL_DEFCONFIG="omap2plus"
BR2_LINUX_KERNEL_ZIMAGE=y
# use the barebox built-in dtb
# BR2_LINUX_KERNEL_DTS_SUPPORT is not set
Signed-off-by: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Pieter Smith [Sun, 24 Apr 2016 21:15:23 +0000 (23:15 +0200)]
barebox: prepare for auxiliarry build
No functional changes. In preparation for the auxiliary barebox build,
boot/barebox is split into two parts:
1. boot/barebox:
- The source and patch specification which are to be shared between the
barebox and barebox-aux packages.
- The barebox-package function and build logic.
2. boot/barebox/barebox:
- The package configuration, fragments, barebox env, etc.
- The actual barebox package make instantiation.
Signed-off-by: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 30 Apr 2016 12:43:04 +0000 (14:43 +0200)]
toolchain-external: bump version of Linaro AArch64 toolchain
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 30 Apr 2016 12:43:03 +0000 (14:43 +0200)]
toolchain-external: bump version of Linaro ARMeb toolchain
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 30 Apr 2016 12:43:02 +0000 (14:43 +0200)]
toolchain-external: bump version of Linaro ARM toolchain
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 29 Apr 2016 13:46:10 +0000 (10:46 -0300)]
webkitgtk24: mark as deprecated
It's affected by 40+ security bugs, and upstream will only care to fix
the latest stable branch, which is 2.12.x
Some effort was made with the 2.4.10 release to address some security
bugs but it's incomplete.
See:
https://blogs.gnome.org/mcatanzaro/2016/02/01/on-webkit-security-updates/
https://blogs.gnome.org/mcatanzaro/2016/02/19/webkitgtk-gets-security-updates/
Also:
http://webkitgtk.org/security/WSA-2016-0002.html
http://webkitgtk.org/security/WSA-2016-0001.html
http://webkitgtk.org/security/WSA-2015-0002.html
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 29 Apr 2016 13:46:09 +0000 (10:46 -0300)]
midori: bump to version 0.5.11
Also drop BR2_PACKAGE_MIDORI_HTTPS option since it's now handled in the
webkitgtk package to satisfy MiniBrowser.
This version can't work with the older webkitgtk24 engine so it switches
to the new version.
Also make gcr support conditional on x11 support for libgtk3, it doesn't
work otherwise.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 29 Apr 2016 13:46:08 +0000 (10:46 -0300)]
webkitgtk: new package
Add the latest 2.12.x upstream stable branch.
Both 2.4.x and 2.12.x can live side-by-side, however only the latest
stable branch/releases are security-maintained, so add it unslotted.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Mon, 23 Nov 2015 16:27:12 +0000 (17:27 +0100)]
android-tools: add new package
This package allows to build the fastboot and adb host utilities,
which can be used to interact with target devices implementing one of
these protocols.
The work behind the host utilities was funded by ECA Group
<http://www.ecagroup.com>. ECA Group is the copyright owner of the
contributed code.
The package also allows to build fastboot, adb and adbd daemon for the
target.
Regarding adbd, the target is required to have the FunctionFS USB Gadget
configuration. Then the following commands enable the use of adb:
# modprobe g_ffs idVendor=0x18d1 idProduct=0x4e42 \
iSerialNumber="buildroot"
# mkdir -p /dev/usb-ffs/adb
# mount -t functionfs adb /dev/usb-ffs/adb -o uid=2000,gid=2000
# adbd &
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Julien Corjon <corjon.j@ecagroup.com>
[Thomas:
- update on top of master.
- fix Config.in.host prompt, it should have been "host android-tools"
and not just "android-tools".]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Waldemar Brodkorb [Fri, 29 Apr 2016 17:53:08 +0000 (19:53 +0200)]
board: add qemu coldfire support
Add kernel config and defconfig for Qemu Coldfire.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Waldemar Brodkorb [Fri, 29 Apr 2016 17:51:23 +0000 (19:51 +0200)]
toolchain: add coldfire support
Add support for m68k/coldfire. A gcc patch is required
to avoid gcc ICE.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Naour [Wed, 30 Dec 2015 14:30:16 +0000 (15:30 +0100)]
toolchain-external: bump CodeSourcery aarch64 to 2014.11
Runtime tested using qemu_aarch64_virt_defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas: updated to the latest master branch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Naour [Mon, 4 May 2015 22:01:48 +0000 (00:01 +0200)]
toolchain-external: fix installation for CodeSourcery AArch64 toolchain
The extracted toolchain sources contains a single symlink in the
aarch64-linux-gnu/libc/lib directory wich is lost during Buildroot's
staging install.
aarch64-linux-gnu/libc/lib/ld-linux-aarch64.so.1 -> ../lib64/ld-2.18.so
Add a custom post install staging and target hooks to create it
manually.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: also make the same tweak in the target.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Waldemar Brodkorb [Fri, 29 Apr 2016 17:48:40 +0000 (19:48 +0200)]
move busybox-minimal.config to be used by other noMMU targets
Config can be used by other noMMU targets as qemu-system-m68k
with coldfire emulation.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 29 Apr 2016 17:38:26 +0000 (14:38 -0300)]
qemu/x86*: update instructions to use virtio
Switch the invocation command to use virtio-blk and virtio-net for
better performance.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 29 Apr 2016 17:38:25 +0000 (14:38 -0300)]
qemu/x86*: enable virtio for kernel config
It has better performance for block and net.
Enable virgl (DRM_VIRTIO_GPU) support for 3D acceleration.
And also DRM_BOCHS for better stdvga acceleration.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 29 Apr 2016 17:38:24 +0000 (14:38 -0300)]
qemu/x86: use symlinked kernel config
It's exactly the same as the x86_64 variant so just create a symlink.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Fri, 29 Apr 2016 17:59:38 +0000 (19:59 +0200)]
opkg: add missing dependency on libarchive
opkg requires libarchive. This was expressed in the Config.in file with a
select, but not in the .mk file.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Francois Perrad [Sat, 30 Apr 2016 08:33:07 +0000 (10:33 +0200)]
libtommath: build with -fPIC
This fixes the build on x86_64, see:
http://autobuild.buildroot.net/results/212/
212469db5dc8399070390603c0fdf7f12b130cda/
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Francois Perrad [Sat, 30 Apr 2016 10:00:46 +0000 (12:00 +0200)]
perl: bump to version 5.22.2
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 29 Apr 2016 12:16:48 +0000 (09:16 -0300)]
linux-headers: bump 4.1.x series
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jörg Krause [Fri, 29 Apr 2016 06:24:46 +0000 (08:24 +0200)]
shairport-sync: bump to version 2.8.3
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Fri, 29 Apr 2016 00:19:56 +0000 (21:19 -0300)]
php: security bump to version 5.6.21
Fixes (CVEs not assigned yet):
bug #72094 - Out of bounds heap read access in exif header processing
bug #71912 - libgd: signedness vulnerability
bug #72061 - Out-of-bounds reads in zif_grapheme_stripos with negative offset
bug #71843 - null ptr deref ZEND_RETURN_SPEC_CONST_HANDLER
bug #71952 - Corruption inside imageaffinematrixget
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Trent Piepho [Tue, 8 Mar 2016 21:02:15 +0000 (21:02 +0000)]
purge-locales: Handle empty locale directories better
If a locale directory is empty, shell code like "for langdir in
$$dir/*;" will loop once with langdir set to "path/to/dir/*", rather
than not looping at all, which would obviously be the desired
behavior.
Then "grep -qx $${langdir##*/}" ungoes two shell expansions (how?)
that transform the expression from "${langdir##*/}" to "*" to "list of
all files in buildroot root dir". Which is most certainly not what
this command was supposed to do.
If one of those files happens to be an 8GB flash image, grep consumes
all available memory and crashes trying to search it.
Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Thu, 28 Apr 2016 21:29:13 +0000 (23:29 +0200)]
configs/sheevaplug_defconfig: use 4.5.2 kernel, configure eth0
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Francois Perrad [Thu, 28 Apr 2016 19:59:31 +0000 (21:59 +0200)]
moarvm: use libtommath
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 28 Apr 2016 20:30:55 +0000 (17:30 -0300)]
xf86-input-libinput: bump to version 0.18.0
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 28 Apr 2016 20:30:34 +0000 (17:30 -0300)]
xterm: bump to version 324
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 28 Apr 2016 20:30:06 +0000 (17:30 -0300)]
libxkbcommon: bump to version 0.6.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 28 Apr 2016 20:29:43 +0000 (17:29 -0300)]
sshfs: bump to version 2.7
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 28 Apr 2016 18:28:43 +0000 (15:28 -0300)]
subversion: security bump to version 1.9.4
Fixes:
CVE-2016-2167 - svnserve/sasl may authenticate users using the wrong
realm.
CVE-2016-2168 - Remotely triggerable DoS vulnerability in mod_authz_svn
during COPY/MOVE authorization check.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Martin Bark [Thu, 28 Apr 2016 15:39:55 +0000 (16:39 +0100)]
package/nodejs: bump version to 6.0.0
See https://nodejs.org/en/blog/release/v6.0.0/
The patches from 5.11.0 have been copied to 6.0.0 with the following
changes:
- Removed 0001-Remove-dependency-on-Python-bz2-module.patch,
0003-Fix-va_list-not-declared.patch and
0004-Fix-support-for-uClibc-ng.patch as all 3 have been fixed upstream
- Renamed 0002-gyp-force-link-command-to-use-CXX.patch to
0001-gyp-force-link-command-to-use-CXX.patch
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 28 Apr 2016 14:33:07 +0000 (11:33 -0300)]
mpv: va-api requires egl-drm, wayland and/or x11
The VA-API acceleration requires one or more of the egl-drm, wayland
and/or x11 backends.
Since the egl-drm backend means LIBGL (X11) + EGL + DRM we'll handle it
later once the mesa3d libgl hidden knob is applied.
So for now we'll support wayland and x11 until that happens. Fixes:
http://autobuild.buildroot.net/results/4b9/
4b98d0c2c0617715e77fb47b3d97037c6b7562ec/
[Peter: pass --disable-vaapi if libva isn't enabled,
invert wayland/X11 test as suggested by Thomas]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Thu, 28 Apr 2016 14:26:23 +0000 (16:26 +0200)]
package/libdrm: bump version to 2.4.68
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Francois Perrad [Sun, 10 Apr 2016 14:55:25 +0000 (16:55 +0200)]
libtomcrypt: new package
[Peter: fix building without wchar]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Francois Perrad [Sun, 10 Apr 2016 14:55:24 +0000 (16:55 +0200)]
libtommath: new package
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Thu, 28 Apr 2016 12:14:33 +0000 (14:14 +0200)]
mpv: fix typo in xkbcommon comment
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Thu, 28 Apr 2016 12:11:41 +0000 (14:11 +0200)]
chrony: bump version
From the release notes:
Enhancements
------------
* Add support for NTP and command response rate limiting
* Add support for dropping root privileges on Mac OS X, FreeBSD, Solaris
* Add require and trust options for source selection
* Enable logchange by default (1 second threshold)
* Set RTC on Mac OS X with rtcsync directive
* Allow binding to NTP port after dropping root privileges on NetBSD
* Drop CAP_NET_BIND_SERVICE capability on Linux when NTP port is disabled
* Resolve names in separate process when seccomp filter is enabled
* Replace old records in client log when memory limit is reached
* Don't reveal local time and synchronisation state in client packets
* Don't keep client sockets open for longer than necessary
* Ignore poll in KoD RATE packets as ntpd doesn't always set it correctly
* Warn when using keys shorter than 80 bits
* Add keygen command to generate random keys easily
* Add serverstats command to report NTP and command packet statistics
Bug fixes
---------
* Fix clock correction after making step on Mac OS X
* Fix building on Solaris
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Julian Scheel [Mon, 25 Apr 2016 08:09:29 +0000 (10:09 +0200)]
package/cryptopp: Backport gcc compatibility patch
Import patch from cryptopp upstream which fixes the gcc version checks
for using attribute deprecated with messages. Fixes build with host
gcc versions < 4.5.
Signed-off-by: Julian Scheel <julian@jusst.de>
[Thomas:
- directly use the patch from upstream through <pkg>_PATCH rather
than storing it in package/cryptopp/, as it helps avoiding
line-endings problems: upstream has the source code with DOS line
endings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Thu, 28 Apr 2016 11:20:45 +0000 (08:20 -0300)]
mpv: fix wayland deps
The wayland backend requires libxkbcommon, so when wayland is available
select it to avoid build failure and obscure dependencies. Fixes:
http://autobuild.buildroot.net/results/ed2/
ed2660361c9720e48dd5959f2711fd7f14031b0d/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Benoît Mauduit [Wed, 27 Apr 2016 21:21:00 +0000 (23:21 +0200)]
raspberrypi3_defconfig: bump to kernel version 4.4.8
Signed-off-by: Benoît Mauduit <bmauduit@beneth.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Benoît Mauduit [Wed, 27 Apr 2016 21:20:59 +0000 (23:20 +0200)]
raspberrypi2_defconfig: bump to kernel version 4.4.8
Signed-off-by: Benoît Mauduit <bmauduit@beneth.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Benoît Mauduit [Wed, 27 Apr 2016 21:20:58 +0000 (23:20 +0200)]
raspberrypi_defconfig: bump to kernel version 4.4.8
Signed-off-by: Benoît Mauduit <bmauduit@beneth.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Seiderer [Mon, 25 Apr 2016 21:48:34 +0000 (23:48 +0200)]
rpi-firmware: change overlay file suffix from dtb to dtbo
Commit
dc7b1c0 (rpi-firmware: bump version) bumped rpi-firmware to a version
based on kernel 4.4.x, but didn't update the overlay logic to handle the
.dtbo files from dynamic device tree support.
For details, see:
https://www.raspberrypi.org/forums/viewtopic.php?f=107&t=139732
[Peter: extend description]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 27 Apr 2016 13:12:02 +0000 (10:12 -0300)]
mpv: new package
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Wed, 27 Apr 2016 13:54:03 +0000 (15:54 +0200)]
gcc: add support for gcc 6
This commit adds the support for gcc 6. This release allows to remove
a large number of our gcc patches, mainly thanks to the Xtensa and
musl related patches being merged upstream.
Patches kept with no changes:
100-uclibc-conf.patch
301-missing-execinfo_h.patch
810-arm-softfloat-libgcc.patch
830-arm_unbreak_armv4t.patch
840-microblaze-enable-dwarf-eh-support.patch
860-cilk-wchar.patch
890-fix-m68k-compile.patch
Patches dropped because they have been merged upstream, or were
already upstream backports:
120-gcc-config.gcc-fix-typo-for-powerpc-e6500-cpu_is_64b.patch (merged)
850-libstdcxx-uclibc-c99.patch (merged in a different form, see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58393)
870-xtensa-add-mauto-litpools-option.patch (upstream backport)
871-xtensa-reimplement-register-spilling.patch (upstream backport)
872-xtensa-use-unwind-dw2-fde-dip-instead-of-unwind-dw2-.patch (upstream backport)
873-xtensa-fix-_Unwind_GetCFA.patch (upstream backport)
874-xtensa-add-uclinux-support.patch (upstream backport)
900-libitm-fixes-for-musl-support.patch (upstream backport)
901-fixincludes-update-for-musl-support.patch (upstream backport)
902-unwind-fix-for-musl.patch (upstream backport)
903-libstdc++-libgfortran-gthr-workaround-for-musl.patch (upstream backport)
904-musl-libc-config.patch (upstream backport)
905-add-musl-support-to-gcc.patch (upstream backport)
905-add-musl-support-to-gcc.patch (upstream backport)
906-mips-musl-support.patch (upstream backport)
907-x86-musl-support.patch (upstream backport)
908-arm-musl-support.patch (upstream backport)
909-aarch64-musl-support.patch (upstream backport)
Successfully build-time and run-time tested with
qemu_arm_vexpress_defconfig, using gcc 6.x, both in uClibc and musl
configurations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jörg Krause [Mon, 25 Apr 2016 19:54:43 +0000 (21:54 +0200)]
yajl: remove obsolete patch
Commit
302563539dacb284576a443401cdfd061eb2e1e8 fixes link with libm for all
targets linking against libyajl{,_s}. This makes patch "0001-cmake-uClibc-Fix
-missing-libm-for-tests" obsolete so it is safe to remove it.
Instead of renumbering all remaining patches the patch defined in YAJL_PATCH
is fetched and put intto the packages directory. Having all the patches in one
places makes the number and order of the patches applied to the package more
clear.
Align patch "0003-Link-with-shared-libyajl-in-a-shared-build" with commit
302563539dacb284576a443401cdfd061eb2e1e8 and remove linking with libm from
test/api/CMakeLists.txt.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gwenhael Goavec-Merou [Wed, 27 Apr 2016 10:18:48 +0000 (12:18 +0200)]
libusbgx: new package
libusbgx is a C library encapsulating the kernel USB gadget-configfs
userspace API functionality.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
[Thomas: adjust license information, there are included examples that
are installed by default, licensed under GPLv2+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Wed, 27 Apr 2016 10:25:09 +0000 (11:25 +0100)]
gzip: bump version to 1.8
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Naour [Wed, 27 Apr 2016 20:15:03 +0000 (22:15 +0200)]
toolchain/helper: update check_unusable_toolchain comment
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Naour [Wed, 27 Apr 2016 20:15:02 +0000 (22:15 +0200)]
toolchain-external: move the sysroot check to helper function
The sysroot toolchain support check is duplicated at two locations in
the external toolchain infra. So move it inside the
check_unusable_toolchain helper that is called when the toolchain
package is configured (TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS).
The check in TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS can be safely
removed since it's already done in check_unusable_toolchain helper.
The check in TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS was removed by
2a87b64f8e8a832a351f8552eb032e4b18431949.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Naour [Wed, 27 Apr 2016 20:15:01 +0000 (22:15 +0200)]
toolchain-external: add a check for unsupported toolchains
Some toolchain can't be used by Buildroot due to sysroot location
issue, so the $(ARCH)-linux-gnu-gcc -print-file-name=libc.a command
return only "libc.a"
This lead to an error during the header check version helper,
so these toolchains can't be imported into Buildroot.
cc1: fatal error: $PWD/libc.a/usr/include/linux/version.h: No such file or directory
compilation terminated.
support/scripts/check-kernel-headers.sh: line 38: /tmp/check-headers.4V5PPF: Permission denied
This issue happen with the first linaro 2015.11 [1] release and
CodeSourcery standard edition [2].
Here is the sysroot directory tree for linaro 2015.11:
$ ls libc/arm-linux-gnueabihf
etc lib sbin usr var
Here is the sysroot directory tree for CodeSourcery standard:
$ ls libc/sgxx-glibc
etc lib lib64 sbin usr var
Add a check to error out with an explicit error message
The check don't use toolchain_find_libc_a function directly since
"realpath -f" is used internally and return an absolute path.
[1] https://bugs.linaro.org/show_bug.cgi?id=1995#c7
[2] http://lists.busybox.net/pipermail/buildroot/2014-October/110696.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Wed, 27 Apr 2016 10:49:03 +0000 (12:49 +0200)]
package/x264: bump version
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Wed, 27 Apr 2016 11:05:51 +0000 (13:05 +0200)]
package/dovecot-pigeonhole: bump version to 0.4.14
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Wed, 27 Apr 2016 11:05:50 +0000 (13:05 +0200)]
package/dovecot: bump version to 2.2.24
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Wed, 27 Apr 2016 10:38:48 +0000 (07:38 -0300)]
ruby: bump to version 2.3.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vincent Stehlé [Wed, 27 Apr 2016 13:12:44 +0000 (15:12 +0200)]
i7z: new package
"A better i7 (and now i3, i5) reporting tool for Linux."
i7z can print out the C-states and temperature for i3, i5 and i7 based
Core processors from Intel (including Nehalems, Sandy Bridge and Ivy
Bridge).
https://github.com/ajaiantilal/i7z
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Wed, 27 Apr 2016 17:25:41 +0000 (14:25 -0300)]
linux-headers: bump 3.{4, 12, 18}.x series
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Mon, 25 Apr 2016 22:22:14 +0000 (00:22 +0200)]
package/x11r7/xlib_libXfixes: fix compile error by backporting upstream commit
Fixes an error not yet caught by autobuilders:
In file included from SaveSet.c:27:0:
Xfixesint.h:67:20: error: static declaration of '_XEatDataWords' follows non-static declaration
static inline void _XEatDataWords(Display *dpy, unsigned long n)
^
To reproduce use this defconfig:
BR2_powerpc64le=y
BR2_powerpc_power8=y
BR2_OPTIMIZE_3=y
BR2_GLIBC_VERSION_2_23=y
BR2_BINUTILS_VERSION_2_26_X=y
BR2_GCC_VERSION_5_X=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XLIB_LIBXFIXES=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Mon, 25 Apr 2016 17:50:41 +0000 (19:50 +0200)]
package/jsoncpp: Do not treat conversion warning as error
Fixes
http://autobuild.buildroot.net/results/74b/
74b1b9f8defc275ff2bc3d877faf2863929737b9/
http://autobuild.buildroot.net/results/71d/
71dcaf18e3d42c66af8036a68250eea1be09227b/
http://autobuild.buildroot.net/results/599/
5997a9e4a8ca8b6171438495920d0a487518851c/
http://autobuild.buildroot.net/results/4ab/
4abde1d7fd631d3b50a6b53824a781a08d022bca/
http://autobuild.buildroot.net/results/968/
9680ebd8c804ef15d471519d54f8aa209710414d/
http://autobuild.buildroot.net/results/d5b/
d5be4d51458ca10f3f4ff5fd3ad4b3cfd097f3ad/
http://autobuild.buildroot.net/results/b1e/
b1e3fc27f3d0cdd6ca8f7aff06f7d5e4108817ec/
http://autobuild.buildroot.net/results/ffb/
ffb40572269c63438228000495e1dc78c778788e/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Tue, 26 Apr 2016 12:02:40 +0000 (13:02 +0100)]
ipmitool: add an option to enable/disable ipmishell
Fixes:
http://autobuild.buildroot.net/results/a62/
a62e95619acb3d4d6be4425cf44a4628ac227494/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Tue, 26 Apr 2016 12:02:39 +0000 (13:02 +0100)]
ipmitool: explicitly enable lanplus when selected
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Baruch Siach [Tue, 26 Apr 2016 07:36:55 +0000 (10:36 +0300)]
c-icap: avoid host library search path
Add AUTORECONF as a workaround to the effect of '-Wl,-rpath -Wl,/usr/lib' that
c-icap adds to the linker command.
Fixes:
http://autobuild.buildroot.net/results/077/
077374329b2782dbb4b4a9ee7af264cdda311ccc/
http://autobuild.buildroot.net/results/057/
057a88179150a4f02990d7b9b0d8f2de3c9da1a3/
http://autobuild.buildroot.net/results/da6/
da62b80989df6b8f1b5557b4987d7a6999d30bb8/
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Baruch Siach [Tue, 26 Apr 2016 07:36:54 +0000 (10:36 +0300)]
c-icap-modules: bump to version 0.4.2
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Baruch Siach [Tue, 26 Apr 2016 07:36:53 +0000 (10:36 +0300)]
c-icap: bump to version 0.4.2
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Martin Bark [Tue, 26 Apr 2016 10:28:58 +0000 (11:28 +0100)]
package/nodejs: bump version to 5.11.0
See https://nodejs.org/en/blog/release/v5.11.0/
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Martin Bark [Tue, 26 Apr 2016 10:28:57 +0000 (11:28 +0100)]
package/nodejs: bump version to 0.10.44
See https://nodejs.org/en/blog/release/v0.10.44/
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Tue, 26 Apr 2016 16:58:41 +0000 (13:58 -0300)]
glib-networking: bump to version 2.48.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Tue, 26 Apr 2016 16:58:24 +0000 (13:58 -0300)]
libsoup: bump to version 2.54.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Mon, 25 Apr 2016 21:50:30 +0000 (23:50 +0200)]
wf111: bump to 5.2.2-r2
This revision fixes the build with recent kernel versions, which have
seen changes in the MMC framework breaking the build of external SDIO
drivers.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Mon, 25 Apr 2016 21:49:32 +0000 (23:49 +0200)]
wf111: properly define and use the WF111_VERSION variable
Instead of hardcoding again the version of the package when defining
WF111_SOURCE, this commit changes the WF111_VERSION so that it
contains the entire version number, and then modifies the WF111_SOURCE
definitions to use WF111_VERSION.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Matthew Starr [Tue, 3 Nov 2015 16:52:13 +0000 (17:52 +0100)]
wf111: fix overwriting module files during install
When installing the WF111 modules, the module.* files generated during
the kernel compilation were overridden. This ended up having the wrong
information about the modules compiled in a given image (and only the
one about the WF111 module). This could be verified using the
"modprobe -l" command, with only the wf111 module showing up.
This patch fixes this by invoking the install_static target (which
will do both the build and installation) in WF111_INSTALL_TARGET_CMDS.
This way the files are not overridden but instead updated with the
additional WF111 informations.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Mon, 25 Apr 2016 20:53:11 +0000 (22:53 +0200)]
toolchain-external: remove useless shell continuations
When a message with MESSAGE, we can print it as the first command of
the command sequence, and in this case, we don't need to use a shell
continuation.
In one case, the call to MESSAGE is moved a few lines up in the
sequence of commands.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Mon, 25 Apr 2016 20:12:43 +0000 (22:12 +0200)]
toolchain-external: rename Blackfin related special variables
As suggested by Arnout, this commit renames:
- TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FDPIC to
TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FDPIC
- TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FLAT to
TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FLAT
Which makes it clear that those variables are installing libraries to
the target, and make their naming more consistent with the naming of
other variables in the file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Fri, 12 Feb 2016 19:20:26 +0000 (20:20 +0100)]
toolchain-external: unify LIB_EXTERNAL_LIBS and USR_LIB_EXTERNAL_LIBS
With the alignment of toolchain library location in target and staging,
there is no need anymore for the distinction between LIB_EXTERNAL_LIBS and
USR_LIB_EXTERNAL_LIBS. Unify them into TOOLCHAIN_EXTERNAL_LIBS.
Related, update the help text of
BR2_TOOLCHAIN_EXTRA_TOOLCHAIN_EXTERNAL_LIBS.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Fri, 12 Feb 2016 19:20:25 +0000 (20:20 +0100)]
toolchain-external: align library locations in target and staging dir
The toolchain-external logic is roughly:
- populate the staging dir by rsyncing the entire ${ARCH_LIB_DIR} and
usr/${ARCH_LIB_DIR} from sysroot.
- populate the target dir by explictly copying some libraries from sysroot
into target/lib and some other libraries in target/usr/lib, the split
being hardcoded into buildroot regardless of the location in the sysroot.
This means that a library libfoo could be located in:
staging/lib/libfoo.so
target/usr/lib/libfoo.so
When debugging an application that links against this library, gdb will
fruitlessly search for 'usr/lib/libfoo.so' in staging, and then suggest to
use 'set solib-search-path' which is a hack, really.
To solve the problem, we need to make sure that libraries from the toolchain
are installed in the same relative location in staging and target.
Achieve this by:
- replacing the convoluted search for libraries using for+find in sysroot
with a simple find in staging.
- determining DESTDIR for each library individually based on the location in
staging.
- treating LIB_EXTERNAL_LIBS and USR_LIB_EXTERNAL_LIBS equivalently
These changes also allow for the removal of most arguments to
copy_toolchain_lib_root in the method itself and their callers.
Test procedure:
- set configuration for a given toolchain
- make clean toolchain
- find output/target | sort > /tmp/out-before
- apply patch
- make clean toolchain
- find output/target | sort > /tmp/out-after
- diff -u /tmp/out-before /tmp/out-after
The only changes should be some libraries moving from lib to usr/lib or vice
versa. Notable examples being libstdc++ and libatomic.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- use -L instead of -follow in the find invocation, as suggested by
Arnout.
- move the BR2_STATIC_LIBS condition as a make condition rather than
a shell condition, as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Fri, 12 Feb 2016 19:20:24 +0000 (20:20 +0100)]
toolchain-external: extract installation of gdbserver to separate define
The installation of the gdbserver binary has no relation to the installation
of the target libraries. Moving it to a separate define improves the
understandability of the code and makes later refactoring easier.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[Thomas:
- move the BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY condition as a make
condition rather than a shell condition, as suggested by Romain
Naour.
- rename the TOOLCHAIN_EXTERNAL_INSTALL_GDBSERVER variable to
TOOLCHAIN_EXTERNAL_INSTALL_TARGET_GDBSERVER as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Fri, 12 Feb 2016 19:20:22 +0000 (20:20 +0100)]
toolchain-external: blackfin: install FDPIC libraries also to staging
For external Blackfin toolchains with BR2_BFIN_INSTALL_FDPIC_SHARED set,
the FDPIC shared libraries are currently only copied to the target
directory, not to staging.
For debugging purposes, an unstripped copy in staging is necessary.
Moreover, this change will simplify a subsequent change that lines up the
location of shared libraries between target and staging directories.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sebastian Frias [Mon, 25 Apr 2016 14:52:17 +0000 (16:52 +0200)]
linux: properly install all images in the initramfs case
The target "$(LINUX_DIR)/.stamp_initramfs_rebuilt" uses its own
'cp' command, instead of LINUX_INSTALL_IMAGE/LINUX_INSTALL_IMAGES_CMDS
provided by (or updated with) commit
055e6162bba7 ("linux: don't build
appended DTB image in place and support multiple images") and thus is
not operating properly when APPENDED_DTB is used.
Indeed, it copies a single image, and does not copy the one with the DTB
appended.
This patch replaces the 'cp' command with LINUX_INSTALL_IMAGE which
handles APPENDED_DTB.
Fixes: 055e6162bba7 ("linux: don't build appended DTB image in place and
support multiple images")
Signed-off-by: Sebastian Frias <sf84@laposte.net>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
projects / buildroot.git / log