tinyxml2: fix build in static libs configuration

tinyxml2 can build both static and shared libraries. By default, only
shared library is built. Shared/static builds are controlled using
separate cmake flags BUILD_SHARED_LIBS and BUILD_STATIC_LIBS.

In static libs configuration, we internally pass -DBUILD_SHARED_LIBS=OFF
cmake flag to build system which disables both shared and static builds
of library, resulting in failures while linking executable with library.

So pass -DBUILD_STATIC_LIBS=ON cmake flag in case of static libs
configuration.

fixes:
  http://autobuild.buildroot.net/results/d30/d301bcbe5db26068b35eaa94bd816ae8cf8ef2e1

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 4.{4,9,10}.x series

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs: add raspberrypi3 64bits defconfig

This configuration builds a 64bit image for RaspberryPi 3.

The size of the ext4 filesystem has to be extended to fit the large amount
(~60MB) of kernel modules enabled in the defconfig.

[Peter: drop gcc version selection / glibc, explain ext4 size requirement]
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openssh: add support for HW SSL engines

Enable support for OpenSSH to use a hardware SSL engine if
cryptodev-linux is included. Without this, OpenSSH uses only
OpenSSL software crypto implementation.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
CC: Baruch Siach <baruch@tkos.co.il>
CC: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rpi-bt-firmware: new package

Add firmware file for the Raspberry Pi 3 and Zero W Bluetooth module.

Note that to successfully download the firmware bluez5_utils needs a patch[1].

Even though the firmware file name (BCM43430A1.hcd) only mentions the
Bluetooth module, it is most likely tailored for the Raspberry Pi boards.
Firmware for the same BT module on other boards look different. For this
reason the name of the package is rpi-bt-firmware.

[1] http://www.spinics.net/lists/linux-bluetooth/msg69470.html

[Peter: correct Config.in ordering]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

picocom: force target LDFLAGS

This allows a static build of picocom when BR2_STATIC_LIBS=y but the toolchain
provides static and shared libraries.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

picocom: bump to version 2.2

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dtc: bump version to 1.4.4

Adds overlay support.

Drop the non-upstreamed 0002-extra-cflags.patch and instead simply pass the
needed CFLAGS as make arguments.  Passing the full upstream warning flags
are not important in the Buildroot context, so this is simpler than
maintaining a patch.

Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

empty: bump to version 0.6.20b

Drop upstream patch.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

moarvm: bump version to 2017.04

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/rapidjson: switch to CMake

Upcoming Kodi v18 depends on RapidJSON and detects it by using pkg-conf:
https://github.com/xbmc/xbmc/blob/master/cmake/modules/FindRapidJSON.cmake#L13

Currently our package installs only the header files, but RapidJSON.pc
is also needed. Luckily this can be fixed by switching to CMake which
does the job, also add configure options to disable the CMake build of
executables.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: bump version to 2.4.13.2

Removed patch applied upstream:
https://github.com/opencv/opencv/commit/c7045184ce220a04796d8e9072ac42d2d362dc71

Renumbered remaining patches.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

daemon: new package

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/raspberrypi3: use correct CPU

We so far were using a Cortex-A7 as the CPU for the rpi3, as this was
the closest we had available, in 32-bit mode, to the real CPU used in
the rpi3.

But now we can also use the Cortex-A53 in 32-bit mode, so we use that,
which makes for an optimised build (A53 has an improved instruction set,
as compared to the A7).

Also drop the DTB overlay option, it defaults to 'y'.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Martin Bark <martin@barkynet.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libcsv: new package

libcsv is a small, simple and fast CSV library written in pure
ANSI C89 that can read and write CSV data.

Signed-off-by: David Graziano <david.graziano@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-netaddr: change setup type to setuptools

The latest netaddr version switched to setuptools.

Fixes:

http://autobuild.buildroot.net/results/e9b/e9b0013abe7e866fd224593f90ec30bdc809151f

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luajit: bump to version 2.0.5

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/y*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter y in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter x in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs/website: update for 2017.02.2

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2017.02.2

[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 799aed7a181e82a6446403b7abe77119622a6779)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/w*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter w in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/v*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter v in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/u*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter u in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/t*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter t in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/s*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter s in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/r*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter r in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/q*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter q in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 4.4.x series to 4.4.65

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-header: bump to 4.11 kernel version

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain: add 4.11.x choice for headers

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board: add stm32f429-disc1 config

This change renders the stm32f429discovery a bit more generic and reuse most
of its settings for the stm32f429-disc1 board.

Cc: Waldemar Brodkorb <wbx@openadk.org>
Cc: Davide Viti <zinosat@tiscali.it>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fdk-aac: bump to version 0.1.5

Also, remove the compile flags to make it build
with GCC6 as it was added upstream

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/p*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter p in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/o*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter o in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/n*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter n in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/m*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter m in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/l*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter l in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/k*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter k in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/j*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter j in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/i*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter i in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

packages/g*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter g in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nanomsg: new package

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mpir: fix build failure on MIPS

Fixes:

  http://autobuild.buildroot.net/results/3de0ef545a7303ec6564ecf1a1da3dd539957ed4/

Signed-off-by: Semyon Kolganov <semenak94@mail.ru>
[Thomas: remove bogus PowerPC stuff, fix n64 specification, rework
commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi: re-install prompt for optical drives

In 81c438aa (package/kodi: Rework audio encoder support), the prompt for
the optical drive support was dropped, on the assumption that such
support was only needed when an audio encoder was enabled.

However, support for optical drives is also required when, surprisingly,
one wants to read a DVD (and probably a BD as well, but this was not
tested by lack of hardware).

Re-instate the prompt, so one can enable optical drive support even when
no audio encoder enabled.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: bump default to version 4.11

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libpng: bump version to 1.6.29

Refactored patch 0002, added support for Intel SSE2.

Changelog:
https://sourceforge.net/p/libpng/code/ci/b363e01e6b5e865e536db62ca4480f3a2d4690bd/#diff-2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libpng: cleanup NEON support options

Suggested by Thomas:
http://lists.busybox.net/pipermail/buildroot/2017-April/189086.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ifupdown: wordexp is enabled in uClibc now

Package can now be used for uClibc toolchains.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

atest: wordexp is enabled in uClibc now

Package can now be used for uClibc toolchains.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Revert "lvm2: disable build with uClibc-ng"

This reverts commit 66f136a9f64b880eefa769c1261916773d8f28c0.

Issue fixed with uClibc-ng update to 1.0.24.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

opencv3: bump version to 3.2.0

Also switch to the official GitHub.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

supertux: select BR2_PACKAGE_LIBCURL

libcurl is unconditionally added to the dependencies list in
supertux.mk. However libcurl is not selected in Config.in.

This patch fixes that.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: CodeSourcery MIPS update upstream URL

The current URL returns error 403: Forbidden, so switch to https.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: CodeSourcery ARM update upstream URL

The current URL returns error 403: Forbidden, so switch to https.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: CodeSourcery aarch64 update upstream URL

The current URL returns error 403: Forbidden, so switch to https.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: bump CodeSourcery NIOSII to 2017.05

Tested with qemu_nios2_10m50_defconfig and Qemu 2.9.0 release.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: CodeSourcery NIOSII update upstream URL

The current URL returns error 403: Forbidden, so switch to https.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tinyxml2: bump version to 4.0.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

freetype: add upstream security fixes for CVE-2017-8105 and CVE-2017-8287

Add upstream post-2.7.1 commits (except for ChangeLog modifications) fixing
the following security issues:

CVE-2017-8105 - FreeType 2 before 2017-03-24 has an out-of-bounds write
caused by a heap-based buffer overflow related to the
t1_decoder_parse_charstrings function in psaux/t1decode.c.

CVE-2017-8287 - FreeType 2 before 2017-03-26 has an out-of-bounds write
caused by a heap-based buffer overflow related to the
t1_builder_close_contour function in psaux/psobjs.c.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi: fix typos for libva/libvdpau dependencies

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11vnc: add dependency on libvncserver

x11vnc needs libvncserver, so select it explicitely.

Fixes:

  http://autobuild.buildroot.net/results/34f8045e772b96293cc7d25bd61ac0aa5842824f/

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/expedite: fix build issue with gcc < 5

The code use for loop initial declarations which are only allowed in
C99 mode which is not the default C standard with gcc < 5.

This way of writing for loop was added by the latest commit and it is
not consistent with the rest of the code.
So revert to the C89 for loop syntax.

Reported upstream:
https://phab.enlightenment.org/T5440

Fixes:
http://autobuild.buildroot.net/results/ed8/ed840755e8e486e48eab8c13a8bb5e9a448199ce

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/xenomai: update udev rules search path

The udev rules has been moved to kernel/cobalt/udev.

Fixes:
http://autobuild.buildroot.net/results/8eb/8eb4643faed523ffccd421f20c2955adfde634a6

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

aircrack-ng: requires C++

Fixes:
http://autobuild.buildroot.net/results/9b1/9b1cba480102746389e80b58c0e327b68a235a29/
http://autobuild.buildroot.net/results/f65/f65de186324e6c3cd689540a22fa46ae89afc8c8/
http://autobuild.buildroot.net/results/e02/e02e832a49972ba464f7749cb89d2b20b8df4484/

Cc: Laurent Cans <laurent.cans@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fs/ext2: ensure -b option is always set for mke2img

Signed-off-by: J Evans <g4@novadsp.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS: remove Patrick Ziegler, address bouncing

The e-mail address of Patrick Ziegler no longer exists:

  patrick.ziegler@fh-kl.de  - 550 5.1.1  User unknown

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/f*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter f in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/e*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter e in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/d*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter d in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/c*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter c in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libsquish: fix legal-info

Fixes
http://autobuild.buildroot.net/results/4f8/4f81644ca2e0ec4064f43c6cb00f2d5c858bbf77/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/b*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter b in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/a*/Config.in: fix ordering of statements

The check-package script when ran gives warnings on ordering issues
on all of these Config files.  This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter a in the package directory.

The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: clean up indentation warnings in Config.in files

The check-package script when ran gives warnings on indentation issues
on all of these Config.in files. This patch cleans up warnings related to
the indentation of the Config.in files in the package directory

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas: do not change package/kodi/Config.in and package/x11r7/Config.in.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xdriver_xf86-video-nouveau: bump version to 1.0.15

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi: fix path to binary

Since XBMC was renamed to Kodi, upstream is progressively propagating
the rename to directories and files, and in some cases kept a legacy
symlink xbmc->kodi, like /usr/lib/xbmc pointing to /usr/lib/kodi.

In 62165ae (package/kodi: Fix path to binary in service), the path was
changed to use the new canonical path, but the init script was left out.
This was not seen previously, because of the legacy symlink.

But with the advent of Kodi 17 (Krypton), that legacy symlink is no
more, and the init script no longer works.

Do for the init script what was done two years ago for the service file.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Marcus Hoffmann <m.hoffmann@cartelsol.com>
Reviewed-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/samba4: bump version to 4.5.8

Version bump includes a regression fix:
https://www.samba.org/samba/history/samba-4.5.8.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/{mesa3d, mesa3d-headers}: bump version to 17.0.5

Added all hashes provided by upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt5: drop option for license approved

As stated in previous commits, Buildroot only ever uses the free
license, and we do not have a click-wrap approval for any such free
license for any other package.

The option to approve the license now has no prompt and is no longer
used anywhere.

Legacy handling is not added because it is not useful: when the option
was enabled, it meant "accept the open source license", which is now the
default and only existing behavior.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
[Thomas: remove legacy handling as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt: drop option for license approved

As stated in previous commits, Buildroot only ever uses the free
license, and we do not have a click-wrap approval for any such free
license for any other package.

The option to approve the license now has no prompt and is no longer
used anywhere.

Legacy handling is not added because it is not useful: when the option
was enabled, it meant "accept the open source license", which is now the
default and only existing behavior.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
[Thomas: remove legacy handling as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: drop Qt/Qt5 license approval option

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt5xmlpatterns: always use the opensource license

We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.

The output of legal-info is there to gather all the licenses used in a
build; the license for qt5xmlpatterns will be there to be consulted as
well.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt5x11extras: always use the opensource license

We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.

The output of legal-info is there to gather all the licenses used in a
build; the license for qt5x11extras will be there to be consulted as
well.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt5websockets: always use the opensource license

We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.

The output of legal-info is there to gather all the licenses used in a
build; the license for qt5websockets will be there to be consulted as
well.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt5webkit: always use the opensource license

We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.

The output of legal-info is there to gather all the licenses used in a
build; the license for qt5webkit will be there to be consulted as well.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt5webchannel: always use the opensource license

We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.

The output of legal-info is there to gather all the licenses used in a
build; the license for qt5webchannel will be there to be consulted as
well.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt5tools: always use the opensource license

We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.

The output of legal-info is there to gather all the licenses used in a
build; the license for qt5tools will be there to be consulted as well.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt5svg: always use the opensource license

We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.

The output of legal-info is there to gather all the licenses used in a
build; the license for qt5svg will be there to be consulted as well.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt5serialport: always use the opensource license

We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.

The output of legal-info is there to gather all the licenses used in a
build; the license for qt5serialport will be there to be consulted as
well.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt5serialbus: always use the opensource license

We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.

The output of legal-info is there to gather all the licenses used in a
build; the license for qt5serialbus will be there to be consulted as
well.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt5sensors: always use the opensource license

We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.

The output of legal-info is there to gather all the licenses used in a
build; the license for qt5sensors will be there to be consulted as well.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt5script: always use the opensource license

We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.

The output of legal-info is there to gather all the licenses used in a
build; the license for qt5script will be there to be consulted as well.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt5quickcontrols2: always use the opensource license

We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.

The output of legal-info is there to gather all the licenses used in a
build; the license for qt5quickcontrols2 will be there to be consulted
as well.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt5quickcontrols: always use the opensource license

We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.

The output of legal-info is there to gather all the licenses used in a
build; the license for qt5quickcontrols will be there to be consulted
as well.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt5multimedia: always use the opensource license

We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.

The output of legal-info is there to gather all the licenses used in a
build; the license for qt5multimedia will be there to be consulted as
well.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt5location: always use the opensource license

We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.

The output of legal-info is there to gather all the licenses used in a
build; the license for qt5location will be there to be consulted as well.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt5imageformats: always use the opensource license

We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.

The output of legal-info is there to gather all the licenses used in a
build; the license for qt5imageformats will be there to be consulted as
well.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt5graphicaleffects: always use the opensource license

We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.

The output of legal-info is there to gather all the licenses used in a
build; the license for qt5graphicaleffects will be there to be consulted
as well.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt5enginio: always use the opensource license

We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.

The output of legal-info is there to gather all the licenses used in a
build; the license for qt5enginio will be there to be consulted as well.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>