vbo: increase the size of the immediate mode buffer to decrease draw count

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: use FlushVertices flags properly and clear NeedFlush correctly

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: fix resizing 64-bit vertex attributes

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: optimize resizing vertex attributes during immediate mode

Just move data manually instead of copying all attributes back and forth.

This increases performance by 5% for Viewperf11/Catia - first scene.

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: don't store glVertex values temporarily into exec

This improves performance by 4.3% in Viewperf11/Catia, first scene.

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: pass only either uint32_t or uint64_t into ATTR_UNION

This makes the next commit possible.

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: don't set FLUSH_UPDATE_CURRENT for glVertex

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: keep the immediate mode buffer always mapped for simplicity

It only unmaps when it draws with a non-persistent buffer.

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: don't check ctx->NewState twice in glBegin

_mesa_valid_to_render does it too.

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: remove a funky recursive call in glBegin

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: interleave attrsz, attrtype, and active_sz in memory

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: remove immediate mode code that doesn't do anything and simplify stuff

no change in behavior

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: don't unmap persistent buffer mappings for glBegin/End

This significantly improves performance by lowering CPU overhead.

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: skip FlushMappedBufferRange for glBegin/End by using a persistent mapping

This is a preparation for the next commit and just isolates the removal
of GL_MAP_FLUSH_EXPLICIT_BIT and other map flags that don't make sense with
UNSYNCHRONIZED.

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: create the immediate mode buffer only in vbo_exec_vtx_map

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

mesa: import PIPE_CAP_SIGNED_VERTEX_BUFFER_OFFSET handling

This should decrease overhead in st_update_array.

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

mesa: remove FLUSH_CURRENT calls that have no effect

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

mesa: fix incorrect uses of FLUSH_CURRENT

FLUSH_CURRENT is used to copy attributes from the vbo module to
Current.Attrib. It flushes vertices too, but that's a side effect,
not the intent.

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

glx: print FPS with 2 decimal places

useful if FPS is low.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3590>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3590>

radeonsi: don't update states for the DCC MSAA bug on GFX6-7

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3646>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3646>

radeonsi: fix the DCC MSAA bug workaround

Cc: 19.3 20.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3646>

r600/sfn: Add some documentation

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add .editorconfig file

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add support for SSBO load and store

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add support for atomic instructions

v2: fix compilation with gcc-6

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600: Make sure LLVM is not used for DRAW

For some reasone that is not yet clear the piglit
gl-1.0-rendermode-feedback makes use of the LLVM pipe draw module and
fails there with an assertion. Explicietly disabling LLVM fixes this.

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add lowering UBO access to r600 specific codes

r600 reads vec4 from the UBO, but the offsets in nir are evaluated to the component.
If the offsets are not literal then all non-vec4 reads must resolve the component
after reading a vec4 component (TODO: figure out whether there is a consistent way
to deduct the component that is actually read).

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add GDS instructions

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add compute shader skeleton

This adds some very basic compute shader support.

v2: fix compilation with gcc-6

v3: rebase: correct barrier intrinstic

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add VS for TCS shader skeleton

This adds the VS shader type that handles the output to tesselation shaders

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add support for geometry shader

v2: fix compilation with gcc-6

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: add emitVertex instructions

More preparation for GS support

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add MemRingOut instructions

Preparing support for Geometry shaders.

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add a load GDS result instruction

This is required to read results for atomic SSBO  instructions

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add lowering arrays to scratch and according instructions

Make use of the scratch space for arrays that are larger then 100 elements.
Since for IO r600 is vector based, there is a bit of a scratch space waste
here for arrays that use types smaller then vec4.

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: add register remapping

Make use of the live range evaluation to merge registers. Since the
live ranges are evaluated for register indices, the algorithm is not
optimal, but for most piglits up to glsl-3.3 it does the job.

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: add live range evaluation for the GPR

The algoritm is basically a copy of the TGSI implementation without the
array bits.

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add the WaitAck instruction

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add the VS in and FS out vectorization

Since the nir default implementation doesn't support vectorizing the VS
inputs and FS outputs, additional lowering passes are added here to do
just that. The work is based on the Timothy Arceri's related work.

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600: enable NIR backend DEBUG flag for supported architectures

When NIR is enabled, a few features that are not yet supported will be
explicitely disabled.

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add a basic nir shader backend

This commit adds support for vertex and fragment shaders from NIR, and
support for most TEX and ALU instructions.

Thanks Dave Airlied for adding support for a number of ALU instructions.

v2: fix compilation with gcc-6
v3: rebase: use mesa/core glsl_type_size function

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600: Update state code to accept NIR shaders

v2: Correct commit message (Konstantin Kharlamov)

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600: Add NIR compiler options

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600: Increase space for IO values to agree with PIPE_MAX_SHADER_IN/OUTPUTS

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600: force new CF with TEX only if any texture value is written

This works aound splitting the CF when the gradient is set.

Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

svga: Use pipe_shader_state_from_tgsi to set shader state

Use pipe_shader_state_from_tgsi() to set shader state for transformed
shader so that we get all correct data for respective shader state.

This fixes several regressed glretrace, piglit crashes found during merging
upsteam mesa

Fixes: bf12bc2dd7a2 (draw: add nir info gathering and building support)
Reviewed-by: Charmaine Lee <charmainel@vmware.com>

svga: fix size of format_conversion_table[]

Since we are now using sparse matrix for format_conversion_table,
we have to make sure we have last entry in table which gives the
sense of required size of format_conversion_table

Fixes: 84db6ba7 ("svga: Drop unsupported formats from the format table")
Reviewed-by: Charmaine Lee <charmainel@vmware.com>

gallium/swr: simplify environmental variabled expansion code

There were 2 versions of code doing the same thing.
Since std::regexp are locale-sensitive better is to leave old
good way to do this.

Reviewed-by: Jan Zielinski <jan.zielinski@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3761>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3761>

aco: fix waiting for scalar stores before "writing back" data on GFX8-GFX9

Seems required also on GFX8-GFX9 to achieve correct behaviour. This
is an undocumented behaviour but it makes real sense to me.

pipeline-db on GFX9:
Totals from affected shaders:
SGPRS: 1018 -> 1018 (0.00 %)
VGPRS: 516 -> 516 (0.00 %)
Code Size: 40516 -> 40636 (0.30 %) bytes
Max Waves: 280 -> 280 (0.00 %)

This fixes some sort of sun flickering with Assassins Creed Origins.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2488
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3750>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3750>

Vulkan overlay: use the corresponding image index for each swapchain

pImageIndices should be a pointer to the current image index
otherwise every swapchain but the first one could have a wrong image index

Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3741>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3741>

zink: only inspect dual-src limit if feature enabled

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3689>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3689>

zink: emit blend-target index

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3689>

zink: replace unset buffer with a dummy-buffer

This fixes a crash in spec@!opengl 1.1@ppgtt_memory_alignment

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3673>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3673>

gitlab-ci: disable a630 tests as mesa-cheza is down (again)

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3758>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3758>

radeonsi: don't report that multi-plane formats are supported

Fixes: a554b45d - st/mesa: don't lower YUV when driver supports it natively
Closes: #2376
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3632>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3632>

zink: fixup sampler-usage

It seems I got this stuff all wrong, and looked at driver_location
rather than the binding. But since we mess with the binding, we need to
adjust things a bit to get things right.

This still isn't great as-is, but it seems to work. In the future, we
should move to having samplers always at bindings 0 and up, and just
update the bindings that are used by either of the stages. But this
band-aid should be OK for now.

This fixes 0AD for me.

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3668>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3668>

zink: lower away fdph

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3668>

etnaviv: enable texture upload memory throttling

Fixes oom-killer during piglit's streaming-texture-upload on a
SolidRun CuBox-i with 2GB of RAM.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3745>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3745>

freedreno/ir3: Fold const only when the type is float

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3737>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3737>

freedreno/ir3: put the conversion back for half const to the right place.

The previous commit leads to match immed values unexpectedly.

This makes constlen for each shader including bvert wrong.
Also fixes atan2 for mediump deqp tests.

Fixes: cbd1f47433b ("freedreno/ir3: convert back to 32-bit values for half constant registers.")
v2: Move conversion up above fabs/fneg modifier handling as well.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3737>

freedreno/ir3: Add cat4 mediump opcodes

v2: Reworked to assign half-opcodes in ir3_ra.c (krh).

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3737>

freedreno/ir3: fold const conversion into consumer

A sequence like:

  (nop3)cov.f32f16 hr0.x, c0.x
  mul.f hr4.y, hr1.z, hr0.x

can be turned into:

  mul.f hr4.y, hr1.z, hc0.x

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3737>

freedreno/ir3: fix printing half constant registers.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3737>

freedreno/ir3: Set IR3_REG_HALF flag on src as well in immediate MOV

This lets is_same_type_reg() recognize that the dst and src of the
immediate MOV are the same and unblocks fp16 constant propagation.

Signed-off-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3737>

docs: Mark 20.0-rc2 as done

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3751>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3751>

freedreno: android: fix build of perfcounters.

Some dependencies were missing on android causing a build failure.

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3736>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3736>

freedreno: android: add a6xx-pack.xml.h generation to android build

The generation of a6xx-pack.xml.h was missing in the android build scripts
leading to a build failure.

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3736>

freedreno: android: fix build failure on android due to python version

The freedreno gen_header.py script now only works under python3.
It contains a "print()" call which prints a blank line under python3
but prints "()" under python2.7.

However the Android build currently uses python2.

This leads to incorrect code generation and a later build error.

.../STATIC_LIBRARIES/libfreedreno_registers_intermediates/registers/adreno_common.xml.h:163:2: error: expected identifier or '('
()

Fix this by adding MESA_PYTHON3 and using it for the freedreno scripts.

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3736>

gallium/swr: Fix llvm11 compilation issues

Reviewed-by: Jan Zielinski <jan.zielinski@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3747>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3747>

Vulkan Overlay: Don't try to change the image layout to present twice

The render pass already does the transition.
The pipeline barrier is still needed to transfer the queue family ownership.

Fixes: 320b0f66c274 ("vulkan/overlay: bounce image back to present layout")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3740>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3740>

aco: do not use ds_{read,write}2 on GFX6

According to LLVM, these instructions have a bounds checking bug.
LLVM only uses them on GFX7+.

This fixes broken geometry in Assassins Creed Origins.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2489
Fixes: 4a553212fa1 ("radv: enable ACO support for GFX6")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3746>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3746>

intel/vec4: fix valgrind errors with vf_values array

Fixes valgrind errors introduced since commit a8ec4082.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2346
Fixes: a8ec4082 ("nir+vtn: vec8+vec16 support")
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3691>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3691>

lima/parser: Change value name in RSW parser

Second value of SHADER_ADDRESS is the length of the first instruction
in the shader, so give it a better name.

Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com
Signed-off-by: Andreas Baierl <ichgeh@imkreisrum.de>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3619>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3619>

lima/parser: Extend AUX0 findings

Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Andreas Baierl <ichgeh@imkreisrum.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3619>

lima/parser: Fix RSW depth test parsing

Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Andreas Baierl <ichgeh@imkreisrum.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3619>

i965: remove duplicated comment

Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2416>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2416>

ci: Drop turnip opt-in option

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3742>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3742>

llvmpipe: advertise 4 vertex streams

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3530>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3530>

draw: don't emit vertex to streams with no outputs

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3530>

draw: emit multiple streams to streamout.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3530>

draw/gs: track emitted prims + verts per stream.

This adds tracking of the emitted prims/verts per-stream.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3530>

draw: change geom shader output to an array of outputs.

Instead of a single output ptr, pass in one per output stream.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3530>

gallivm/nir: add support for multiple vertex streams

This adds support to the nir shader build for multiple vertex streams
we store separate stats for each stream, then write them out in the epilogue.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3530>

gallivm/swr: add stream_id to geom epilogue emit

We want to pass a stream in here so we can write out separate
prim/vertex counts for each stream at the end.

This also adds an ignore any stream option so we can stage more code

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3530>

llvmpipe/query: add support for indexed queries

This adds support for the queries needed for gpu_shader5 vertex streams

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3530>

ci: Bump the GLES CTS version to 3.2.6.1.

This brings in the surfaceless fixes so we don't need to check out the
whole repo to cherry pick any more (which was bothering me as I debugged
things late in the painfully slow ARM container build process).

Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3662>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3662>

ci: Disable a bunch of tests on freedreno a630.

On a daily basis I've been having to restart people's a630 jobs in the
front couple of pages of /merge_requests due to spurious failures from our
flaky tests, and fielding reports of spurious fails from other developers,
and babysitting my own marge merges that are failing due to our flakes.

Nobody should have to deal with that, especially not non-freedreno
developers, so just scrape the list of flakes reported to #freedreno-ci
for the last month and ban those tests that have failed more than once
until we have a credible fix.

Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3662>

turnip: Drop explicit configure opt-in for turnip

We don't need this silly thing anymore. Everthing here is WIP.

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3739>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3739>

u_tile: Skip the packed temporary and just store tiles directly.

We were generating a packed copy and then memcpying it, but we can just
pack directly to the destination.  Change on glmark2 -b build:use-vbo=true
is modest: 1.06328% +/- 0.994771% (n=84) but does remove the function that
was .6% of CPU time.

I'm not doing the equivalent "get" path at this time because softpipe's
texture cache has some clipping issues that get revealed.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3698>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3698>

broadcom: Fix implicit declaration of ffs for Android build

Include util/bitscan.h to ensure ffs is available when there is no
glibc like in Android.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/1983
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2554>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2554>

aco: gfx10_wave64_bpermute reduce op to print_ir

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-By: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3683>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3683>

aco: fix gfx10_wave64_bpermute

Since 9254fb4fc72, the pass replaced the SCC clobber with the scalar
identity temporary. Just skip most of the temporary setup, since we don't
need it for gfx10_wave64_bpermute.

Although shuffles are disabled on GFX10, Detroit: Become Human seems to
use them anyway.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-By: Timur Kristóf <timur.kristof@gmail.com>
Fixes: 9254fb4fc72ed289ffded28ef067b4582973e90c ('aco: don't use a scalar
       temporary for reductions on GFX10')

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3683>

Correctly wait in the fragment stage until all semaphores are signaled

This fixes two issues:
- a crash if the application uses more than one semaphore for presenting because the driver expects one stage per semaphore
- the swapchain image could be not ready yet if the semaphores aren't signaled, #946 is possible related

Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3718>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3718>

svga: Fix banded DMA upload

A previous commit ("winsys/svga: Limit the maximum DMA hardware buffer
size") made banded DMA transfer kick in when transfering gnome-shell
window contents under gnome-shell / wayland. This uncovered a bug where
we assumed that banded DMA transfers always occur to the top (y=0) of the
surface.
Fix this by taking the destination y offset into account.

Cc: 19.2 19.3 20.0 <mesa-stable@lists.freedesktop.org>
Fixes: 287c94ea498 ("Squashed commit of the following:")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3733>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3733>

anv: No-op submit and wait calls when no_hw is set

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3734>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3734>

anv: set MOCS on push constants

v2: Also set MOCS on 3DSTATE_CONSTANT_ALL (Ken)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 67d2cb3e9367 ("anv: Add get_push_range_address() helper.")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3732>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3732>

llvmpipe: Bump test timeout to 180 seconds

120 still wasn't always enough for the s390x cross-build job, see e.g.
https://gitlab.freedesktop.org/mesa/mesa/-/jobs/1551685

Reviewed-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3715>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3715>

intel: Load the driver even if I915_PARAM_REVISION is not found.

This param is only available starting on kernel 4.1. Use a default
value of 0 if it is not found instead.

v2: Update commit message (Lionel)

Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Mark Janes <mark.a.janes@intel.com>
Fixes: 96e1c945f2b ("i965: Move device info initialization to common
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3727>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3727>

isl: Fix the android build.

Fixes: 5bea0cf7795 ("intel/isl: Move iris's pipe-to-isl format function to isl.")
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3729>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3729>

intel/genxml: Drop "reserved" enum

This was adding "#define reserved 2" to genxml includes, which is a
fairly mean lowercase word to redefine.  It ends up breaking the build
on Android, which has __u32 reserved fields in headers.

Defining it also has no purpose.  Just drop it.

Fixes: 5bea0cf7795 ("intel/isl: Move iris's pipe-to-isl format function to isl.")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3729>