Bernd Kuhls [Sun, 22 Jul 2018 15:05:17 +0000 (17:05 +0200)]
package/freerdp: bump version to 2.0.0-rc2
Fixes build with upcoming ffmpeg version 4.0.2.
Removed 0001-Fix-gstreamer-1.0-detection.patch, applied upstream.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Luca Ceresoli [Wed, 25 Jul 2018 14:35:38 +0000 (16:35 +0200)]
uboot: zynqmp: allow to use custom psu_init files
U-Boot SPL configures pinmuxes, clocks and other low-level devices. On
the Xilinx ZynqMP SoCs the code to do this resides in a file called
psu_init_gpl.c which is initially generated by the Xilinx development
tools. Add an option to pass these files from the outside (e.g. in the
board files).
For this to work properly, a patch to U-Boot is needed. However this
patch must be applied by each defconfig using
BR2_TARGET_UBOOT_ZYNQMP_PSU_INIT_DIR. If it were in boot/uboot/ to be
applied unconditionally, it would break the build for configs using a
U-Boot version where the patch is already applied.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Joel Carlson <joelsoncarl@gmail.com>
Reviewed-by: Joel Carlson <JoelsonCarl@gmail.com>
Tested-by: Joel Carlson <JoelsonCarl@gmail.com>
[Thomas: add comment about U-Boot version requirements to use this
option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Luca Ceresoli [Wed, 25 Jul 2018 14:35:37 +0000 (16:35 +0200)]
configs/zynqmp_zcu106_defconfig: add Xilinx ZCU106 board (ZynqMP SoC)
This adds support the Xilinx ZCU106 development board.
[Tested on the ES2 (Engineering Sample 2) version of the board]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Joel Carlson <joelsoncarl@gmail.com>
Tested-by: Joel Carlson <JoelsonCarl@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Luca Ceresoli [Wed, 25 Jul 2018 14:35:36 +0000 (16:35 +0200)]
uboot: zynqmp: generate SPL image with PMUFW binary
In order to boot on the Xilinx ZynqMP SoCs, U-Boot SPL requires a
recent PMU firmware loaded. Instruct U-Boot to add pmufw.bin to the
boot.bin file together with U-Boot SPL, and the boot ROM will load
both.
For this to work properly, a patch to U-Boot is needed. However this
patch must be applied by each defconfig that wishes to use
BR2_TARGET_UBOOT_ZYNQMP_PMUFW. If it were in boot/uboot/ to be applied
unconditionally, it would break the build for configs using a U-Boot
version higher than 2018.7-rc1 where the patch is already applied.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Joel Carlson <joelsoncarl@gmail.com>
Reviewed-by: Joel Carlson <JoelsonCarl@gmail.com>
Tested-by: Joel Carlson <JoelsonCarl@gmail.com>
[Thomas:
- indicate that this feature requires U-Boot 2018.07, since commit
c7df098a71e05dc81cee818747759e8060b59626 is needed.
- define UBOOT_ZYNQMP_KCONFIG_PMUFW only once, and instead use a
variable named UBOOT_ZYNQMP_PMUFW_PATH to store the path to the PMU
firmware]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 27 Jul 2018 23:30:00 +0000 (01:30 +0200)]
package/libnss: fix aarch64_be build
libnss does not treat aarch64_be the same way as aarch64:
https://hg.mozilla.org/projects/nss/file/
fb3585458ac3/lib/freebl/Makefile#l523
Add code to translate "aarch64_be" into "aarch64" to fix
http://autobuild.buildroot.net/results/
4fca771980f9b049ce2690971ddd856652cd5b43/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Sat, 28 Jul 2018 08:24:45 +0000 (10:24 +0200)]
package/tvheadend: bump version
Removed patch 0002 after upstream commit:
https://github.com/tvheadend/tvheadend/commit/
e26ce3390a5ca88f3fcee8a7fa0e4bb1b078e538
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas Ehrhardt [Fri, 27 Jul 2018 07:41:25 +0000 (07:41 +0000)]
postgresql: add optional dependency on libxml2
The postgresql package is now built with --with-libxml if
BR2_PACKAGE_LIBXML2 is selected to allow the use of XML functions in
postgresql.
Signed-off-by: Daniel Deterding <dde@innovaphone.com>
Signed-off-by: Thomas Ehrhardt <tehrhardt@innovaphone.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Marcus Folkesson [Fri, 27 Jul 2018 19:40:32 +0000 (21:40 +0200)]
libostree: override path to gpg-error-config
libostree has begun to use `gpg-error-config` in their configuration
script.
Point out gpg-error-config in staging dir to avoid using the one
installed on the host system.
Fixes:
http://autobuild.buildroot.net/results/
447b96e449e881cf1bd9644cda0f386aa4c75724
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Thomas Petazzoni [Sat, 28 Jul 2018 13:33:51 +0000 (15:33 +0200)]
dtc: do not build/install python support
The pylibfdt in dtc is new since 1.4.5, and therefore built since the
bump from 1.4.4 to 1.4.7 in commit
7b929ddcf0812310d0113cf3675429dbd123aa99. Unfortunately, this Python
support causes a number of build failures, be it for host-dtc or dtc.
Since this Python support is not used/needed by anything in Buildroot
at this point, let's simply disable it by passing NO_PYTHON=1. While
doing this, introduce DTC_MAKE_OPTS and HOST_DTC_MAKE_OPTS to avoid
duplicating the variables several times.
Fixes:
http://autobuild.buildroot.net/results/
1ad41fd4890af0c97ee4ff2994ea5431b8953ef8/ (host-dtc)
http://autobuild.buildroot.net/results/
0aefc3aa03a93b1fdf76f2d8946b6f423405382f/ (dtc)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Sat, 28 Jul 2018 08:12:09 +0000 (10:12 +0200)]
linux: bump default to version 4.17.11
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Sat, 28 Jul 2018 08:12:08 +0000 (10:12 +0200)]
linux-headers: bump 4.{4, 9, 14, 16, 17}.x series
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 27 Jul 2018 17:40:30 +0000 (19:40 +0200)]
package/{mesa3d, mesa3d-headers}: bump version to 18.1.5
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas De Schampheleire [Fri, 27 Jul 2018 19:54:23 +0000 (21:54 +0200)]
perl-net-telnet: add missing license declaration
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas De Schampheleire [Fri, 27 Jul 2018 19:54:22 +0000 (21:54 +0200)]
perl-net-ping: add missing license declaration
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas De Schampheleire [Fri, 27 Jul 2018 19:54:21 +0000 (21:54 +0200)]
perl-mime-base64-urlsafe: add missing license declaration
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas De Schampheleire [Fri, 27 Jul 2018 19:54:20 +0000 (21:54 +0200)]
perl-crypt-cbc: add missing license declaration
Update the license as found in the actual source file, and remove the README
from _LICENSE_FILES as it does not contain anything regarding licenses.
Note that adding the source file as LICENSE_FILE means that the
corresponding hash will be different on every version bump.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas De Schampheleire [Fri, 27 Jul 2018 19:54:19 +0000 (21:54 +0200)]
perl-crypt-blowfish: add missing license declaration
The license of this package is not standard, it is a combination of two
sets of statements coming from two different authors.
The license resembles the original 4-clause BSD license (thus including
advertising clause) but without the third clause about endorsement.
The label 'BSD-4-Clause-like' nevertheless seems the closest match.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Naour [Fri, 27 Jul 2018 20:00:33 +0000 (22:00 +0200)]
package/clang: bump to version 6.0.1
http://releases.llvm.org/6.0.1/tools/clang/docs/ReleaseNotes.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Joseph Kogut <joseph.kogut@gmail.com>
Cc: Valentin Korenblit <valentinkorenblit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Naour [Fri, 27 Jul 2018 20:00:32 +0000 (22:00 +0200)]
package/llvm: bump to version 6.0.1
http://releases.llvm.org/6.0.1/docs/ReleaseNotes.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Joseph Kogut <joseph.kogut@gmail.com>
Cc: Valentin Korenblit <valentinkorenblit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabio Estevam [Wed, 25 Jul 2018 23:20:47 +0000 (20:20 -0300)]
linux-headers: bump 4.{4, 9, 14, 17}.x series
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabio Estevam [Wed, 25 Jul 2018 23:20:46 +0000 (20:20 -0300)]
linux: bump default to version 4.17.10
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Trent Piepho [Thu, 26 Jul 2018 23:33:20 +0000 (16:33 -0700)]
lttng-tools: bump to version 2.10.4
Remove patches now present upstream and drop no longer needed
autoreconf.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Trent Piepho [Thu, 26 Jul 2018 23:33:19 +0000 (16:33 -0700)]
lttng-modules: bump version to 2.10.6
This is needed for kernel 2.16.x compatiblity.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Marcin Niestroj [Thu, 26 Jul 2018 17:03:40 +0000 (19:03 +0200)]
uboot: bump to version 2018.07
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Marcin Niestroj [Thu, 26 Jul 2018 17:03:39 +0000 (19:03 +0200)]
uboot-tools: bump to version 2018.07
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Seiderer [Thu, 26 Jul 2018 21:23:53 +0000 (23:23 +0200)]
gstreamer1: bump to 1.14.2
For release desription see [1].
- gst1-vaapi: remove upstream patch 0001-plugins-guard-GstGL-code.patch
[1] https://gstreamer.freedesktop.org/releases/1.14/#1.14.2
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Naour [Thu, 26 Jul 2018 21:30:11 +0000 (23:30 +0200)]
package/gcc: bump to version 8.2.0
Remove upstream patches.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 21 Jul 2018 06:49:30 +0000 (08:49 +0200)]
luarocks: bump to version 3.0.0
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Sat, 21 Jul 2018 14:00:19 +0000 (16:00 +0200)]
package/x11r7/xapp_xkbcomp: bump version to 1.4.2
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Sat, 21 Jul 2018 12:41:39 +0000 (14:41 +0200)]
package/ffmpeg: bump version to 3.4.4
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Sat, 21 Jul 2018 12:03:49 +0000 (14:03 +0200)]
package/znc: security bump to 1.7.1
Fixes CVE-2018-14055 & CVE-2018-14056.
Changelog: https://wiki.znc.in/ChangeLog/1.7.1
Removed 0001-Fix-build-without-SSL-support.patch, applied upstream:
https://github.com/znc/znc/commit/
e567f4cb73a1637141f7e4fc3b0ef44e79568048
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas De Schampheleire [Mon, 23 Jul 2018 20:06:28 +0000 (22:06 +0200)]
perl-net-ssh2: add support for libgcrypt crypto backend
Fix usage of libgcrypt as crypto backend to libssh2, when building
perl-net-ssh2. In order to achieve that, we need to use 'depends on' the
libssh2 backends, which means the user will first need to enable libssh2 and
one of the supported backends, before being able to enable perl-net-ssh2.
Fixes
http://autobuild.buildroot.net/results/
6ee18e7dd17f168c52f79e49cb5e94cf3aa3df1a/
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas De Schampheleire [Mon, 23 Jul 2018 20:06:27 +0000 (22:06 +0200)]
perl-net-ssh2: avoid build system inspecting host paths
During investigation of adding gcrypt support in perl-net-ssh2, it became
clear that its build system is trying to find libraries via host search
paths, i.e. /usr/lib64/ etc.
This can be avoided by explicitly passing a 'lib' and 'inc' path.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas De Schampheleire [Mon, 23 Jul 2018 20:06:26 +0000 (22:06 +0200)]
perl-net-ssh2: add missing dependency on zlib
perl-net-ssh2 requires zlib. When using the openssl backend to libssh2, this
dependency is implicit via openssl, but when using the libgcrypt backend the
dependency is missing.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabio Estevam [Sun, 22 Jul 2018 15:56:44 +0000 (12:56 -0300)]
linux-headers: bump 4.{4, 9, 14, 17}.x series
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabio Estevam [Sun, 22 Jul 2018 15:56:43 +0000 (12:56 -0300)]
linux: bump default to version 4.17.9
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Mon, 23 Jul 2018 18:17:13 +0000 (20:17 +0200)]
mutt: add libidn2 support
libidn2 support was added in version 1.10: http://www.mutt.org/relnotes/1.10
libidn and libidn2 can't be selected at the same time: see configure.ac
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Mon, 23 Jul 2018 18:17:12 +0000 (20:17 +0200)]
mutt: bump to version 1.10.1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Mon, 23 Jul 2018 17:43:45 +0000 (19:43 +0200)]
ncmpc: bump to version 0.30
Since this version, ncmpc depends on C++14:
https://github.com/MusicPlayerDaemon/ncmpc/commit/
aea91692b05e7c2cd2e1b09cf10b0196e3527807
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Mon, 23 Jul 2018 17:00:44 +0000 (19:00 +0200)]
mbedtls: bump to version 2.7.4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Mon, 23 Jul 2018 16:00:07 +0000 (18:00 +0200)]
whois: bump to version 5.3.2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Mon, 23 Jul 2018 15:45:17 +0000 (17:45 +0200)]
i2pd: bump to version 2.19.0
- Remove first two patches (already in version)
- Rename third patch so it is now the first one
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Mon, 23 Jul 2018 15:42:34 +0000 (17:42 +0200)]
boinc: bump to version 7.12.1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Max Filippov [Mon, 23 Jul 2018 19:37:53 +0000 (12:37 -0700)]
package/binutils: fix xtensa linker relaxation regression in 2.31.1
Fix the following xtensa ld error observed when building uClibc-ng
libthread_db with binutils-2.31:
BFD (GNU Binutils) 2.31 internal error, aborting at
elf32-xtensa.c:3269 in elf_xtensa_finish_dynamic_sections
Fixes: https://gitlab.com/free-electrons/toolchains-builder/-/jobs/82264912
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Julien BOIBESSOT [Mon, 23 Jul 2018 15:10:12 +0000 (17:10 +0200)]
package/ti-utils: update website URL
As kernel wireless wiki doesn't seem to have the doc about wl12xx
calibration, points to a backup of the old site.
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Julien BOIBESSOT [Mon, 23 Jul 2018 15:10:11 +0000 (17:10 +0200)]
package/crda: update website URL
Now Linux wireless infos are on corresponding wiki.
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bartosz Golaszewski [Tue, 24 Jul 2018 13:32:46 +0000 (15:32 +0200)]
libgpiod: bump version to v1.1.1
This is a bug-fix release that fixes a couple memory leaks and bugs in
python bindings discovered in the v1.1 release.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Geoff Levand [Tue, 24 Jul 2018 19:32:17 +0000 (19:32 +0000)]
dmidecode: enable for aarch64
arm64 systems support SMBIOS, so update the dmidecode config
to allow building dmidecode for arm64.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Geoff Levand [Tue, 24 Jul 2018 19:32:17 +0000 (19:32 +0000)]
dtc: bump version to 1.4.7
Bump from 1.4.4 to 1.4.7.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Carlos Santos [Wed, 25 Jul 2018 11:18:10 +0000 (08:18 -0300)]
gawk: install /usr/bin/awk as a relative symlink
Fixes:
http://autobuild.buildroot.net/results/
bf3937882023df7ed319dc76f1af10f79785112f/
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Marcin Niestroj [Wed, 25 Jul 2018 12:28:38 +0000 (14:28 +0200)]
package/cryptsetup: bump version to 2.0.3
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Sat, 21 Jul 2018 09:13:38 +0000 (11:13 +0200)]
package/erlang: needs threads
Due to the removal of the non-smp option threads are needed now:
https://github.com/erlang/otp/commit/
ee297c32a768ec333e2a8a3ef829a7690e91d306#diff-900a5d0495caac38a1f51a2cae1b2594R974
Fixes
http://autobuild.buildroot.net/results/285/
285ef07d8e0614dd90a1e4dd3ee28b116990dc0f/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Marcus Folkesson [Sat, 21 Jul 2018 18:32:34 +0000 (20:32 +0200)]
libostree: bump to version 2018.7
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Sat, 21 Jul 2018 16:31:55 +0000 (18:31 +0200)]
package/gnutls: bump version to 3.5.19
Release notes:
https://lists.gnupg.org/pipermail/gnutls-devel/2018-July/008583.html
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Korsgaard [Fri, 20 Jul 2018 22:36:14 +0000 (00:36 +0200)]
docs/website: update for 2018.02.4
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Fri, 20 Jul 2018 22:24:34 +0000 (00:24 +0200)]
Update for 2018.02.4
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit
e4eaf7311dfffff7fd753f24ce2d01a6f5188292)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabio Estevam [Fri, 20 Jul 2018 19:55:22 +0000 (16:55 -0300)]
configs/imx28evk: Bump U-Boot and kernel
Bump U-Boot to 2018.05 version and kernel to 4.17.8.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Laurent Hartanerot [Fri, 20 Jul 2018 09:16:29 +0000 (11:16 +0200)]
imx-gpu-viv: add a missing backslash
[Peter: add semicolon and || exit 1 to catch failures]
Signed-off-by: Laurent Hartanerot <laurent.hartanerot@atos.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Fri, 20 Jul 2018 08:43:03 +0000 (10:43 +0200)]
docs/website: update for 2018.05.1
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Thu, 19 Jul 2018 22:38:47 +0000 (00:38 +0200)]
Update for 2018.05.1
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit
ef26ffddded912570ca3893271e2900aa8b27866)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Romain Naour [Sat, 2 Jun 2018 14:34:07 +0000 (16:34 +0200)]
linux: disable attribute alias with gcc >= 8.1
gcc-8 started warning about function aliases that have a non-matching
prototype. This seems rather useful in general, but it causes tons of
warnings in the Linux kernel, where we rely on abusing those aliases
for system call entry points, in order to sanitze the arguments passed
from user space in registers.
See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82435
Disable the attribute-alias warning introduced by gcc-8 by adding
-Wno-attribute-alias to KCFLAGS.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Jörg Krause [Fri, 20 Jul 2018 07:04:18 +0000 (09:04 +0200)]
bluez-alsa: bump to version 1.3.0
Add optional build of rfcomm which requires readline.
Update license hash as authorship has been updated in the license file.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jörg Krause [Fri, 20 Jul 2018 06:40:49 +0000 (08:40 +0200)]
wavemon: bump to version 0.8.2
Also add hash for license file.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Carlos Santos [Thu, 19 Jul 2018 16:59:21 +0000 (13:59 -0300)]
util-linux: bump to version 2.32.1
Small improvements and bug fixes. See change log at
http://www.kernel.org/pub/linux/utils/util-linux/v2.32/v2.32.1-ChangeLog
Change-Id: Ia337a51bb72fc25ca7867eeb88d8ed86bcfe7be8
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabio Estevam [Thu, 19 Jul 2018 17:33:35 +0000 (14:33 -0300)]
linux-headers: bump 4.{4, 17}.x series
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabio Estevam [Thu, 19 Jul 2018 17:33:34 +0000 (14:33 -0300)]
linux: bump default to version 4.17.8
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Samuel Mendoza-Jonas [Thu, 19 Jul 2018 03:12:36 +0000 (13:12 +1000)]
busybox: Update to 1.29.1
Includes fixes to sendmail and wget.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Michaël Burtin [Thu, 19 Jul 2018 13:54:09 +0000 (15:54 +0200)]
libcurl: add nghttp2 optional dependency
The nghttp2 package has recently been added to buildroot. When
enabled, this adds support for HTTP2 to libcurl.
By default, libcurl configure script will enable HTTP2 if the library
is found using pkg-config. Adding this option makes the build
consistent.
Signed-off-by: Michaël Burtin <michael.burtin@netgem.com>
Signed-off-by: Anisse Astier <anisse.astier.ext@netgem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Michaël Burtin [Thu, 19 Jul 2018 13:54:08 +0000 (15:54 +0200)]
nghttp2: new package
nghttp2 is an implementation of HTTP/2 and its header
compression algorithm HPACK in C.
Signed-off-by: Michaël Burtin <michael.burtin@netgem.com>
Signed-off-by: Anisse Astier <anisse.astier.ext@netgem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gary Bisson [Thu, 19 Jul 2018 10:31:09 +0000 (12:31 +0200)]
configs/nitrogen8m: Add new defconfig
NXP i.MX8MQ based SBC with 2GB of LPDDR4 and 8GB eMMC.
More details on the platform here:
https://boundarydevices.com/product/nitrogen8m
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gary Bisson [Thu, 19 Jul 2018 10:31:08 +0000 (12:31 +0200)]
board/boundarydevices: add i.MX8MQ support to u-boot scripts
- Update RAM address
- Update kernel image name for ARM64
- Update U-Boot boot command for ARM64
- Remove obsolete cmd_xxx_present check
- Remove obsolete wlan.mac parameter
- Add cmd_mipi command for MIPI-DSI interface
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gary Bisson [Thu, 19 Jul 2018 10:31:07 +0000 (12:31 +0200)]
board/boundarydevices: add i.MX8MQ support to post-build.sh
- Use proper ARCH for mkimage command
- Use different U-Boot binary name depending on ARCH
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gary Bisson [Thu, 19 Jul 2018 10:31:06 +0000 (12:31 +0200)]
board/boundarydevices: remove obsolete u-boot scripts
6x_bootscript/6x_upgrade have been deprecated for more than a year.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gary Bisson [Thu, 19 Jul 2018 10:31:05 +0000 (12:31 +0200)]
board/boundarydevices/common/post-build.sh: fix U-Boot naming
The upgrade.cmd script expects the binary to be named
u-boot.<uboot_defconfig>.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gary Bisson [Thu, 19 Jul 2018 10:31:04 +0000 (12:31 +0200)]
board/freescale/common/imx: make imx8-bootloader-prepare more generic
Allow user to override the hardcoded dtb name by using
BR2_ROOTFS_POST_SCRIPT_ARGS.
The only user of this script, configs/freescale_imx8mqevk, is updated
accordingly.
Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Damien Thébault [Thu, 12 Jul 2018 06:52:13 +0000 (06:52 +0000)]
support/misc/toolchainfile.cmake.in: use TARGET_LDFLAGS for shared and module libraries
With cmake packages, we are only using TARGET_LDFLAGS for executables
and not for shared libraries.
This patch adds CMAKE_SHARED_LINKER_FLAGS and
CMAKE_MODULE_LINKER_FLAGS to the cmake toolchain file so that
buildroot TARGET_LDFLAGS are used for shared and module libraries.
Signed-off-by: Damien Thébault <damien.thebault@vitec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Baruch Siach [Wed, 18 Jul 2018 18:53:04 +0000 (21:53 +0300)]
bind: fix build with zlib
The bind configure.in now checks for "${with_zlib}/include/zlib.h".
Remove the redundant "include/".
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Baruch Siach [Wed, 18 Jul 2018 18:53:03 +0000 (21:53 +0300)]
bind: fix build with openssl
The bind configure.in uses AC_TRY_RUN that is not compatible with cross
compile. Disable eddsa unconditionally since it requires a newer OpenSSL
version than we currently have. Enable aes; this is always supported in
current OpenSSL versions.
Fixes:
http://autobuild.buildroot.net/results/3ed/
3edb1659954b00401b68ffc7e1c8b3c29581c0e4/
http://autobuild.buildroot.net/results/025/
025e377b51b39ba34647636ad0d0661a3cb95572/
http://autobuild.buildroot.net/results/725/
7250564e780e43e793ae6c8c526985e5519681f4/
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Naour [Wed, 18 Jul 2018 12:07:54 +0000 (14:07 +0200)]
package/binutils: bump to version 2.31.1
>From the release note:
This is a point release over the previous 2.31 version, which was
necessary as a source file was accidentally omitted from that
release.
This release also contains a fix for PR gold/23409 where the gold
linker could end up creating duplicate copies of some symbols.
https://sourceware.org/ml/binutils/2018-07/msg00286.html
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
David Owens [Thu, 12 Jul 2018 16:37:34 +0000 (11:37 -0500)]
libglib2: Avoid absolute path to python in shebang
When the output directory is nested under a long path name, calling the
gdbus-codegen, glib-genmarshal, or glib-mkenums scripts throws the
error:
> '/usr/bin/env: /...: No such file or directory'
This is because libglib2 uses the absolute path to the python
interpreter for its shebang statements, and shebangs have a max length
of 127 chars[1]. A long absolute path will be cut off and appear as a
missing file.
Since the host Python is present in the $PATH passed to all packages, we
can copy the workaround from Yocto and just use the python interpreter
in $PATH[2]. However, 'python' is used instead of 'python3' as the
scripts are compatible with both.
[1] https://linux.die.net/man/2/execve
[2] http://cgit.openembedded.org/openembedded-core/commit/?id=
eef7883587acc933d6f34b559ec03ff84d18573b
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: David Owens <david.owens@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Jörg Krause [Wed, 18 Jul 2018 10:40:00 +0000 (12:40 +0200)]
DEVELOPERS: add bluez-alsa to Jörg Krause
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Jörg Krause [Wed, 18 Jul 2018 10:39:59 +0000 (12:39 +0200)]
DEVELOPERS: remove some packages from Jörg Krause
Remove the following packages from myself:
* bctoolbox
* libshout
* mp4v2
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Jörg Krause [Wed, 18 Jul 2018 10:30:20 +0000 (12:30 +0200)]
shairport-sync: bump to version 3.2.1
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Christoph Engelbert [Mon, 16 Jul 2018 15:13:03 +0000 (18:13 +0300)]
wireless-regdb: add regulatory.db[.p7s] to /lib/firmware
Starting from kernel version 4.15, Linux supports loading
regulatory.db and regulatory.db.p7s files directly from /lib/firmware,
without the need of crda. If the kernel can't load those files it'll
fallback to using crda, but the direct way is preferred.
This patch copies those those files under /lib/firmware. The use of
crda shouldn't be necessary with kernels of 4.15 or later.
Signed-off-by: Christoph Engelbert <me@noctarius.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Daniel Nicoletti [Tue, 17 Jul 2018 20:46:13 +0000 (17:46 -0300)]
cutelyst: new package
A C++ Web Framework built on top of Qt, using
the simple approach of Catalyst (Perl) framework.
Signed-off-by: Daniel Nicoletti <dantti12@gmail.com>
[Thomas: add entry in DEVELOPERS file, move cmake-package invocation
to the end of .mk file, select BR2_PACKAGE_OPENSSL.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas Petazzoni [Wed, 18 Jul 2018 09:57:42 +0000 (11:57 +0200)]
.gitlab-ci.yml: update with the addition of olimex_a10_olinuxino_lime_defconfig
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabio Estevam [Sun, 8 Jul 2018 21:16:19 +0000 (18:16 -0300)]
configs/imx7d-sdb: Add new defconfig
Introduce imx7d-sdb_defconfig that allows booting imx7d-sdb
board using U-Boot and kernel mainline instead of the
vendor provided versions.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[Thomas: add DEVELOPERS entry, regenerate .gitlab-ci.yml]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabio Estevam [Sun, 8 Jul 2018 21:16:18 +0000 (18:16 -0300)]
imx/post-image: Allow flashing u-boot-dtb.imx in the SD card
Add support for flashing the u-boot-dtb.imx binary in the SD card
when a target selects BR2_TARGET_UBOOT_FORMAT_DTB_IMX.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Eric Le Bihan [Tue, 17 Jul 2018 20:48:56 +0000 (22:48 +0200)]
cargo-bin: bump version to 0.27.0
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Eric Le Bihan [Tue, 17 Jul 2018 20:48:55 +0000 (22:48 +0200)]
rust: bump version to 1.27.1
Bump version to 1.27.1 and backport some patches to fix build of
rust-installer.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Eric Le Bihan [Tue, 17 Jul 2018 20:48:54 +0000 (22:48 +0200)]
rust-bin: bump version to 1.27.1
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Naour [Tue, 17 Jul 2018 16:31:42 +0000 (18:31 +0200)]
package/elf2flt: fix build with Binutils >= 2.31
Binutils added diagnostics.h to bfd.h [1], so elf2flt must create a
symlink for this header.
Fixes:
https://gitlab.com/free-electrons/toolchains-builder/-/jobs/
82284139
[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commitdiff;h=
95da9854466ada2572b42f5528711a06a2d42db1
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Laurent Cans [Tue, 17 Jul 2018 15:29:06 +0000 (17:29 +0200)]
aircrack-ng: bump to version 1.3
- Remove patches (already in version)
- Add optional dependency to jemalloc
Signed-off-by: Laurent Cans <laurent.cans@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabio Estevam [Tue, 17 Jul 2018 12:50:19 +0000 (09:50 -0300)]
linux-headers: bump 4.{4, 9, 14, 17}.x series
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabio Estevam [Tue, 17 Jul 2018 12:50:18 +0000 (09:50 -0300)]
linux: bump default to version 4.17.7
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Tue, 17 Jul 2018 11:32:54 +0000 (14:32 +0300)]
bind: security bump to 9.11.4
Fixes CVE-2018-5738: When recursion is enabled but the allow-recursion
and allow-query-cache ACLs are not specified, they should be limited to
local networks, but they were inadvertently set to match the default
allow-query, thus allowing remote queries.
Update license file hash; copyright year update.
Add reference to tarball signature key.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Hollis Blanchard [Tue, 10 Jul 2018 16:46:03 +0000 (09:46 -0700)]
ncurses: make host-ncurses use host terminfo
Host GDB suffers a serious problem: pressing backspace (or ^W ^U or any other
"delete" key) results in a plain space being printed instead, making the
command prompt almost completely unusable.
That's because it's using host-ncurses, which embeds a path for the terminfo
database into the library itself. That path ends up being something like
/home/hollisb/buildroot.git/output/host/share/terminfo, which obviously doesn't
generally exist other hosts. ('relocate-sdk.sh' cannot and does not edit
binaries like libncurses.so.6, so doesn't resolve this problem.)
/usr/share/terminfo is a far better path to use, since it almost certainly
exists on the host. Theoretically, it could be from a different ncurses version
with incompatible terminfo database format, but this doesn't seem to be a
problem in practice. (Future patches could address the theoretical problem if
it actually appears in real life.)
This change allows buildroot's host gdb, which uses ncurses 6.x, to work on
RHEL5, RHEL6, and RHEL7, which all provide terminfo from ncurses 5.x.
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Alexey Brodkin [Thu, 12 Jul 2018 11:13:49 +0000 (14:13 +0300)]
package/gcc: Backport code generation fix for ARC700
Fixes assembler failure when compiling for ARC700 only:
------------------------>8---------------------
{standard input}: Assembler messages:
{standard input}:213: Error: operand out of range (128 is not between -128 and 127)
make[2]: *** [scripts/Makefile.build:317: net/ipv4/xfrm4_mode_tunnel.o] Error 1
------------------------>8---------------------
This is an upstream fix scheduled for the next release, see
https://github.com/gcc-mirror/gcc/commit/
5afc07eeb18fb7dd351ac981367bce721ca22af3
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Naour [Mon, 16 Jul 2018 21:30:10 +0000 (23:30 +0200)]
package/binutils: add binutils version 2.31
https://sourceware.org/ml/binutils/2018-07/msg00213.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Joseph Kogut [Mon, 16 Jul 2018 17:21:41 +0000 (10:21 -0700)]
DEVELOPERS: add myself for clang and llvm
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
projects / buildroot.git / log