Maciej W. Rozycki [Tue, 19 Jul 2016 15:19:19 +0000 (16:19 +0100)]
MIPS: Convert cross-mode BAL to JALX
Convert cross-mode regular MIPS and microMIPS BAL instructions to JALX,
similarly to how JAL instructions are converted.
bfd/
* elfxx-mips.c (mips_elf_perform_relocation): Convert cross-mode
BAL to JALX.
(_bfd_mips_elf_relocate_section) <bfd_reloc_outofrange>: Add a
corresponding error message.
gas/
* config/tc-mips.c (mips_force_relocation, mips_fix_adjustable):
Adjust comments for BAL to JALX linker conversion.
(fix_bad_cross_mode_branch_p): Accept cross-mode BAL.
* testsuite/gas/mips/unaligned-branch-1.l: Update error messages
expected.
* testsuite/gas/mips/unaligned-branch-micromips-1.l: Likewise.
* testsuite/gas/mips/branch-local-4.d: New test.
* testsuite/gas/mips/branch-local-n32-4.d: New test.
* testsuite/gas/mips/branch-local-n64-4.d: New test.
* testsuite/gas/mips/branch-addend.d: New test.
* testsuite/gas/mips/branch-addend-n32.d: New test.
* testsuite/gas/mips/branch-addend-n64.d: New test.
* testsuite/gas/mips/branch-local-4.s: New test source.
* testsuite/gas/mips/branch-addend.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/unaligned-branch-2.d: Update error
messages expected.
* testsuite/ld-mips-elf/unaligned-branch-r6-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch-mips16.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch-micromips.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-addend.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic.d: New test.
* testsuite/ld-mips-elf/bal-jalx-addend-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-addend-n64.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local-n64.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-n64.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-2.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-3.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-2.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-3.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-2.s: New test source.
* testsuite/ld-mips-elf/unaligned-jalx-3.s: New test source.
* testsuite/ld-mips-elf/unaligned-jalx-addend-2.s: New test
source.
* testsuite/ld-mips-elf/unaligned-jalx-addend-3.s: New test
source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Maciej W. Rozycki [Tue, 19 Jul 2016 12:59:28 +0000 (13:59 +0100)]
MIPS: Verify the ISA mode and alignment of branch and jump targets
Verify that the ISA mode of branch targets is the same as the referring
relocation, so that an attempt to produce a branch between instructions
encoded in different ISA modes each causes an error rather than silently
producing non-functional code. Make sure that no symbol or addend bits
are silently truncated: terminate with an error if the relocation value
calculated cannot be encoded in the relocatable field of a branch; for
REL targets also applying to any intermediate addend.
Also make jump target's alignment verification consistent with that for
branches.
This change will require an update to some obscure handcoded assembly
sources which make branches to labels placed at data objects, however
for microMIPS code only. These labels will have to be updated with the
`.insn' directive for containing code to assemble and link successfully.
Such code is broken as any such labels have always been required by the
microMIPS architecture specification[1][2] to be annotated this way for
correct interpretation, and with our old code missing `.insn' directives
caused labels to present different semantics depending on whether they
were referred with branch (ISA bit ignored) or other relocations (ISA
bit respected).
Enforcing these checks however will ensure errors in building software,
like mixed regular MIPS and microMIPS code links with branches between,
will be diagnosed at the build time rather than causing odd run-time
errors such as intermittent crashes. It will also let cross-mode BAL
instructions be converted to JALX instructions, with a separate change.
References:
[1] "MIPS Architecture for Programmers, Volume II-B: The microMIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
Revision 5.04, January 15, 2014, Section 7.1 "Assembly-Level
Compatibility", p. 533
[2] "MIPS Architecture for Programmers, Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 5.04, January 15, 2014, Section 8.1 "Assembly-Level
Compatibility", p. 623
bfd/
* elfxx-mips.c (b_reloc_p): Add R_MICROMIPS_PC16_S1,
R_MICROMIPS_PC10_S1 and R_MICROMIPS_PC7_S1.
(branch_reloc_p): New function.
(mips_elf_calculate_relocation): Handle ISA mode determination
for relocations against section symbols, against absolute
symbols and absolute relocations. Also set `*cross_mode_jump_p'
for branches.
<R_MIPS16_26, R_MIPS_26, R_MICROMIPS_26_S1>: Suppress alignment
checks for weak undefined symbols. Also check target alignment
within the same ISA mode.
<R_MIPS_PC16, R_MIPS_GNU_REL16_S2>: Handle cross-mode branches
in the alignment check.
<R_MICROMIPS_PC7_S1>: Add an alignment check.
<R_MICROMIPS_PC10_S1>: Likewise.
<R_MICROMIPS_PC16_S1>: Likewise.
(mips_elf_perform_relocation): Report a failure for unsupported
same-mode JALX instructions and cross-mode branches.
(_bfd_mips_elf_relocate_section) <bfd_reloc_outofrange>: Add
error messages for jumps to misaligned addresses.
gas/
* config/tc-mips.c (mips_force_relocation): Also retain branch
relocations against MIPS16 and microMIPS symbols.
(fix_bad_cross_mode_jump_p): New function.
(fix_bad_same_mode_jalx_p): Likewise.
(fix_bad_misaligned_jump_p): Likewise.
(fix_bad_cross_mode_branch_p): Likewise.
(fix_bad_misaligned_branch_p): Likewise.
(fix_validate_branch): Likewise.
(md_apply_fix) <BFD_RELOC_MIPS_JMP, BFD_RELOC_MIPS16_JMP>
<BFD_RELOC_MICROMIPS_JMP>: Separate from BFD_RELOC_MIPS_SHIFT5,
etc. Verify the ISA mode and alignment of the jump target.
<BFD_RELOC_MIPS_21_PCREL_S2>: Replace the inline alignment check
with a call to `fix_validate_branch'.
<BFD_RELOC_MIPS_26_PCREL_S2>: Likewise.
<BFD_RELOC_16_PCREL_S2>: Likewise.
<BFD_RELOC_MICROMIPS_7_PCREL_S1, BFD_RELOC_MICROMIPS_10_PCREL_S1>
<BFD_RELOC_MICROMIPS_16_PCREL_S1>: Retain the original addend.
Verify the ISA mode and alignment of the branch target.
(md_convert_frag): Verify the ISA mode and alignment of resolved
MIPS16 branch targets.
* testsuite/gas/mips/branch-misc-1.s: Annotate non-instruction
branch targets with `.insn'.
* testsuite/gas/mips/branch-misc-5.s: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5-64.d: Update
accordingly.
* testsuite/gas/mips/micromips@branch-misc-5pic-64.d: Likewise.
* testsuite/gas/mips/micromips-branch-relax.s: Annotate
non-instruction branch target with `.insn'.
* testsuite/gas/mips/micromips.s: Replace microMIPS JALX targets
with external symbols.
* testsuite/gas/mips/micromips-insn32.d: Update accordingly.
* testsuite/gas/mips/micromips-noinsn32.d: Likewise.
* testsuite/gas/mips/micromips-trap.d: Likewise.
* testsuite/gas/mips/micromips.d: Likewise.
* testsuite/gas/mips/mips16.s: Annotate non-instruction branch
targets with `.insn'.
* testsuite/gas/mips/mips16.d: Update accordingly.
* testsuite/gas/mips/mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-dwarf2.s: Annotate non-instruction
branch target with `.insn'.
* testsuite/gas/mips/relax-swap3.s: Likewise.
* testsuite/gas/mips/branch-local-2.l: New list test.
* testsuite/gas/mips/branch-local-3.l: New list test.
* testsuite/gas/mips/branch-local-n32-2.l: New list test.
* testsuite/gas/mips/branch-local-n32-3.l: New list test.
* testsuite/gas/mips/branch-local-n64-2.l: New list test.
* testsuite/gas/mips/branch-local-n64-3.l: New list test.
* testsuite/gas/mips/unaligned-jump-1.l: New list test.
* testsuite/gas/mips/unaligned-jump-2.l: New list test.
* testsuite/gas/mips/unaligned-jump-3.d: New test.
* testsuite/gas/mips/unaligned-jump-mips16-1.l: New list test.
* testsuite/gas/mips/unaligned-jump-mips16-2.l: New list test.
* testsuite/gas/mips/unaligned-jump-mips16-3.d: New test.
* testsuite/gas/mips/unaligned-jump-micromips-1.l: New list
test.
* testsuite/gas/mips/unaligned-jump-micromips-2.l: New list
test.
* testsuite/gas/mips/unaligned-jump-micromips-3.d: New test.
* testsuite/gas/mips/unaligned-branch-1.l: New list test.
* testsuite/gas/mips/unaligned-branch-2.l: New list test.
* testsuite/gas/mips/unaligned-branch-3.d: New test.
* testsuite/gas/mips/unaligned-branch-r6-1.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-2.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-3.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-4.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-5.d: New test.
* testsuite/gas/mips/unaligned-branch-r6-6.d: New test.
* testsuite/gas/mips/unaligned-branch-mips16-1.l: New list test.
* testsuite/gas/mips/unaligned-branch-mips16-2.l: New list test.
* testsuite/gas/mips/unaligned-branch-mips16-3.d: New test.
* testsuite/gas/mips/unaligned-branch-micromips-1.l: New list
test.
* testsuite/gas/mips/unaligned-branch-micromips-2.l: New list
test.
* testsuite/gas/mips/unaligned-branch-micromips-3.d: New test.
* testsuite/gas/mips/branch-local-2.s: New test source.
* testsuite/gas/mips/branch-local-3.s: New test source.
* testsuite/gas/mips/branch-local-n32-2.s: New test source.
* testsuite/gas/mips/branch-local-n32-3.s: New test source.
* testsuite/gas/mips/branch-local-n64-2.s: New test source.
* testsuite/gas/mips/branch-local-n64-3.s: New test source.
* testsuite/gas/mips/unaligned-jump-1.s: New test source.
* testsuite/gas/mips/unaligned-jump-2.s: New test source.
* testsuite/gas/mips/unaligned-jump-mips16-1.s: New test source.
* testsuite/gas/mips/unaligned-jump-mips16-2.s: New test source.
* testsuite/gas/mips/unaligned-jump-micromips-1.s: New test
source.
* testsuite/gas/mips/unaligned-jump-micromips-2.s: New test
source.
* testsuite/gas/mips/unaligned-branch-1.s: New test source.
* testsuite/gas/mips/unaligned-branch-2.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-1.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-2.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-3.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-4.s: New test source.
* testsuite/gas/mips/unaligned-branch-mips16-1.s: New test
source.
* testsuite/gas/mips/unaligned-branch-mips16-2.s: New test
source.
* testsuite/gas/mips/unaligned-branch-micromips-1.s: New test
source.
* testsuite/gas/mips/unaligned-branch-micromips-2.s: New test
source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/unaligned-jalx-1.d: Update error message
expected.
* testsuite/ld-mips-elf/unaligned-jalx-addend-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-addend-mips16-1.d:
Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-addend-micromips-1.d:
Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-mips16-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-micromips-1.d: Likewise.
* testsuite/ld-mips-elf/undefweak-overflow.s: Add jumps,
microMIPS BAL and MIPS16 instructions.
* testsuite/ld-mips-elf/undefweak-overflow.d: Update
accordingly.
* testsuite/ld-mips-elf/unaligned-branch-2.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-r6-1.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-r6-2.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-mips16.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-micromips.d: New test.
* testsuite/ld-mips-elf/unaligned-jump-mips16.d: New test.
* testsuite/ld-mips-elf/unaligned-jump-micromips.d: New test.
* testsuite/ld-mips-elf/unaligned-jump.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Trevor Saunders [Sat, 21 May 2016 08:39:05 +0000 (04:39 -0400)]
make the type of nds32_pseudo_opcode::pseudo_val unsigned
It can be initialized with values greater than 0x80000000, which don't fit in a
signed int. Further it appears to be used as a set of bit flags where unsigned
int is more typical.
gas/ChangeLog:
2016-07-19 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-nds32.c (struct nds32_pseudo_opcode): Make pseudo_val
unsigned int.
(do_pseudo_b): Adjust.
(do_pseudo_bal): Likewise.
(do_pseudo_bge): Likewise.
(do_pseudo_bges): Likewise.
(do_pseudo_bgt): Likewise.
(do_pseudo_bgts): Likewise.
(do_pseudo_ble): Likewise.
(do_pseudo_bles): Likewise.
(do_pseudo_blt): Likewise.
(do_pseudo_blts): Likewise.
(do_pseudo_br): Likewise.
(do_pseudo_bral): Likewise.
(do_pseudo_la): Likewise.
(do_pseudo_li): Likewise.
(do_pseudo_ls_bhw): Likewise.
(do_pseudo_ls_bhwp): Likewise.
(do_pseudo_ls_bhwpc): Likewise.
(do_pseudo_ls_bhwi): Likewise.
(do_pseudo_move): Likewise.
(do_pseudo_neg): Likewise.
(do_pseudo_not): Likewise.
(do_pseudo_pushpopm): Likewise.
(do_pseudo_pushpop): Likewise.
(do_pseudo_v3push): Likewise.
(do_pseudo_v3pop): Likewise.
(do_pseudo_pushpop_stack): Likewise.
(do_pseudo_push_bhwd): Likewise.
(do_pseudo_pop_bhwd): Likewise.
(do_pseudo_pusha): Likewise.
(do_pseudo_pushi): Likewise.
Trevor Saunders [Mon, 27 Jun 2016 11:38:33 +0000 (07:38 -0400)]
sparc: make a field type bfd_reloc_code_real_type
gas/ChangeLog:
2016-07-19 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-sparc.c (struct pop_entry): Make the type of reloc
bfd_reloc_code_real_type.
Trevor Saunders [Mon, 27 Jun 2016 11:38:14 +0000 (07:38 -0400)]
sparc: remove a sentinal
gas/ChangeLog:
2016-07-19 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-sparc.c (pop_table): Remove sentinel.
(NUM_PERC_ENTRIES): Use ARRAY_SIZE on pop_table.
(md_begin): Adjust.
Trevor Saunders [Mon, 18 Jul 2016 08:07:26 +0000 (04:07 -0400)]
tc-z8k.c: make some argument types bfd_reloc_code_real_type
gas/ChangeLog:
2016-07-19 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-z8k.c (newfix): Make type of type argument
bfd_reloc_code_real_type.
(apply_fix): Likewise.
Yao Qi [Tue, 19 Jul 2016 09:42:08 +0000 (10:42 +0100)]
Use do_self_tests in selftest.exp
This patch uses do_self_tests to simplify selftest.exp. It doesn't
change the tests except the order,
-PASS: gdb.gdb/selftest.exp: Disassemble main
PASS: gdb.gdb/selftest.exp: breakpoint in captured_main
+PASS: gdb.gdb/selftest.exp: run until breakpoint at captured_main
+PASS: gdb.gdb/selftest.exp: Disassemble main
PASS: gdb.gdb/selftest.exp: set interrupt character in test_with_self
PASS: gdb.gdb/selftest.exp: set listsize to 1
-PASS: gdb.gdb/selftest.exp: run until breakpoint at captured_main
gdb/testsuite:
2016-07-19 Yao Qi <yao.qi@linaro.org>
* gdb.gdb/selftest.exp: Remove checks on is_remote and isnative.
(test_with_self): Remove some code. Remove argument executable.
(top-level): Use do_self_tests.
Andrew Burgess [Mon, 18 Jul 2016 20:00:00 +0000 (21:00 +0100)]
ld: Restore file offset after a plugin fails to claim a file
When using the plugin interface to claim an input file the claim method
from (possible) many plugins can be called on an input file. If these
claim methods read content from the input file then the file offset
stored in the underlying file descriptor will change.
As we share a file descriptor between the plugin interface (created with
dup in ld/plugin.c:plugin_object_p) and the input bfd object, then any
changes to the file offset in the file descriptor will effect the bfd
object. Also, as the changes to the file offset did not originate from
calls through the bfd interface, but instead came from the plugin
directly, then the bfd will not be aware that the file offset has
changed. This is a problem as the bfd library caches the file offset.
If the plugin decides not to claim an input file then, currently, we
leave the bfd in a state where the actual file offset is out of sync
with the cached file offset.
This problem came to light after a recent commit
7d0b9ebc1e0079271a7c7737b53bc026525eab64 (Don't include libbfd.h outside
of bfd, part 6) however, I don't believe that commit actual introduces
the bug, it just exposed the existing issue.
This commit solves the problem by backing up and restoring the file
offset for the file descriptor of the input file. The restore is only
done if the plugin does not claim the input file, as it is in this case
that the bfd library might be used again to try and identify the
unclaimed file.
ld/ChangeLog:
* plugin.c (plugin_call_claim_file): Restore the file offset after
an unsuccessful attempt to claim a file.
* testplug.c (bytes_to_read_before_claim): New global.
(record_read_length): New function, sets new global
bytes_to_read_before_claim.
(parse_option): Handle 'read:<NUMBER>' option.
(onclaim_file): Read file content before checking for claim.
* testsuite/ld-plugin/plugin-30.d: New file.
* testsuite/ld-plugin/plugin.exp: Add new test.
Denis Chertykov [Tue, 19 Jul 2016 06:47:23 +0000 (09:47 +0300)]
Update PC when simulate break instruction.
PR target/ 19401
* avr/interp.c (step_once): Pass break instruction address to
sim_engine_halt function which writes that to PC. Remove code that
follows that function call as it is unreachable.
GDB Administrator [Tue, 19 Jul 2016 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Mon, 18 Jul 2016 00:00:20 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sun, 17 Jul 2016 00:00:40 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Sat, 16 Jul 2016 04:02:16 +0000 (13:32 +0930)]
Don't include libbfd.h outside of bfd, part 6
Some messing with plugin code in order to not need arelt_size in
ld code. File descriptor handling in ld/plugin.c is tidied too,
simply duping the open fd rather than opening the file again.
bfd/
* elflink.c: Include plugin-api.h.
* plugin.c (bfd_plugin_open_input): New function, extracted from..
(try_claim): ..here.
* plugin.h: Don't include bfd.h.
(bfd_plugin_open_input): Declare.
binutils/
* ar.c: Include plugin-api.h.
* nm.c: Likewise.
ld/
* plugin.c: Don't include libbfd.h. Include plugin-api.h
before bfd/plugin.h.
(plugin_object_p): Use bfd_plugin_open_input.
Alan Modra [Sat, 16 Jul 2016 04:00:41 +0000 (13:30 +0930)]
Don't include libbfd.h outside of bfd, part 5
A rewrite of the code in bucomm.c supporting objdump -i, to use
bfd_iterate_over_targets rather than accessing bfd_target_vector
directly. Calculates widest arch string rather than using an
out of date constant. Stashes info from the first display of valid
target/arch combinations for use in second tabular display.
binutils/
* bucomm.c: Don't include libbfd.h.
(endian_string, display_target_list): Delete forward declaration.
(display_info_table, display_target_tables): Likewise.
(LONGEST_ARCH): Delete.
(struct display_target): New.
(do_display_target): New function.
(display_target_list, display_info): Rewrite functions.
(display_info_table): Delete.
(do_info_size, do_info_header, do_info_row): New functions.
Alan Modra [Sat, 16 Jul 2016 03:59:35 +0000 (13:29 +0930)]
Don't include libbfd.h outside of bfd, part 4
Not much to see here, just renaming a function.
bfd/
* targets.c (bfd_seach_for_target): Rename to..
(bfd_iterate_over_targets): ..this. Rewrite doc.
* bfd-in2.h: Regenerate.
ld/
* ldlang.c (open_output): Replace bfd_search_for_target with
bfd_iterate_over_targets. Localize vars.
Alan Modra [Sat, 16 Jul 2016 03:58:30 +0000 (13:28 +0930)]
Don't include libbfd.h outside of bfd, part 3
Fix od-macho.c to use a leb128 function from binutils/dwarf.c rather
than one from bfd/libbfd.c.
binutils/
* elfcomm.h (HOST_WIDEST_INT): Move to..
* sysdep.h: ..here.
* od-macho.c: Don't include libbfd.h. Do include dwarf.h
(dump_dyld_info_rebase): Use read_leb128 rather than
read_unsigned_leb128.
(dump_dyld_info_bind, dump_dyld_info_export_1): Likewise.
(dump_segment_split_info): Likewise.
(dump_dyld_info): Rename vars to avoid shadowing dwarf.h enums.
(dump_load_command): Likewise.
Alan Modra [Sat, 16 Jul 2016 03:57:30 +0000 (13:27 +0930)]
Don't include libbfd.h outside of bfd, part 2
Make bfd_default_set_arch_mach available to a bunch of gas backend
files.
bfd/
* archures.c (bfd_default_set_arch_mach): Make available in bfd.h.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-epiphany.c: Don't include libbfd.h.
* config/tc-frv.c: Likewise.
* config/tc-ip2k.c: Likewise.
* config/tc-iq2000.c: Likewise.
* config/tc-m32c.c: Likewise.
* config/tc-mep.c: Likewise.
* config/tc-mt.c: Likewise.
* config/tc-nios2.c: Likewise.
Alan Modra [Sat, 16 Jul 2016 03:55:11 +0000 (13:25 +0930)]
Don't include libbfd.h outside of bfd, part 1
Make BFD_ALIGN available to objcopy. Fix assertions. Don't use
bfd_log2 in ppc32elf.em or bfd_malloc in xtensaelf.em and bucomm.c.
bfd/
* libbfd-in.h (BFD_ALIGN): Move to..
* bfd-in.h: ..here.
* elf32-ppc.h (struct ppc_elf_params): Add pagesize.
* elf32-ppc.c (default_params): Adjust init.
(ppc_elf_link_params): Set pagesize_p2.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
binutils/
* ar.c: Don't include libbfd.h.
* objcopy.c: Likewise.
* bucomm.c (bfd_get_archive_filename): Use xmalloc rather than
bfd_malloc.
gas/
* config/bfin-parse.y: Don't include libbfd.h.
* config/tc-bfin.c: Likewise.
* config/tc-rl78.c: Likewise.
* config/tc-rx.c: Likewise.
* config/tc-metag.c: Likewise.
(create_dspreg_htabs, create_scond_htab): Use gas_assert not BFD_ASSERT.
* Makefile.am: Update dependencies.
* Makefile.in: Regenerate.
ld/
* ldlang.c: Don't include libbfd.h.
* emultempl/nds32elf.em: Likewise.
* emultempl/ppc64elf.em: Likewise.
* emultempl/ppc32elf.em: Likewise.
(pagesize): Delete.
(params): Update init.
(ppc_after_open_output): Use params.pagesize. Don't call bfd_log2.
(PARSE_AND_LIST_ARGS_CASES): Use params.pagesize.
* emultempl/sh64elf.em: Don't include libbfd.h.
(after_allocation): Use ASSERT, not BFD_ASSERT.
* emultempl/xtensaelf.em: Don't include libbfd.h.
(replace_insn_sec_with_prop_sec): Use xmalloc, not bfd_malloc.
* Makefile.am: Update dependencies.
* Makefile.in: Regenerate.
GDB Administrator [Sat, 16 Jul 2016 00:00:20 +0000 (00:00 +0000)]
Automatic date update in version.in
Don Breazeal [Fri, 15 Jul 2016 18:19:19 +0000 (11:19 -0700)]
GDB testsuite: Escape paths used in regular expressions
This patch fixes problems with a few GDB testsuites when executing in a
path that contains special characters (e.g. "++"). When such paths are
used as a regular expression, the regular expression parser will choke
and cause the tests to fail. This patch uses string_to_regexp to
escape strings that will be used as regular expressions, in order to
sanitize path names used in expect scripts.
2016-07-15 Zachary Welch <zwelch@codesourcery.com>
Don Breazeal <donb@codesourcery.com>
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Escape paths used in regular expressions.
* gdb.stabs/weird.exp: Likewise.
Thomas Preud'homme [Fri, 15 Jul 2016 16:49:08 +0000 (17:49 +0100)]
Add support for creating ELF import libraries
2016-07-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* elf-bfd.h (elf_backend_filter_implib_symbols): Declare backend hook.
(_bfd_elf_filter_global_symbols): Declare.
* elf.c (_bfd_elf_filter_global_symbols): New function.
* elflink.c (elf_filter_global_symbols): Likewise.
(elf_output_implib): Likewise.
(bfd_elf_final_link): Call above function, failing if it does.
* elfxx-target.h (elf_backend_filter_implib_symbols): Define macro and
default it to NULL.
(elf_backend_copy_indirect_symbol): Fix spacing.
(elf_backend_hide_symbol): Likewise.
(elfNN_bed): Initialize elf_backend_filter_implib_symbols backend hook.
include/
* bfdlink.h (struct bfd_link_info): Declare new ldscript_def and
out_implib_bfd fields.
2016-07-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
Nick Clifton <nickc@redhat.com>
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Open import
library file for writing and initialize implib_bfd field of link_info
structure.
* emultempl/pe.em (pe_implib_filename): Remove variable declaration.
(OPTION_IMPLIB_FILENAME): Remove macro definition.
(gld${EMULATION_NAME}_add_options): Remove --out-implib option.
(gld_${EMULATION_NAME}_list_options): Likewise.
(gld${EMULATION_NAME}_handle_option): Likewise.
(gld_${EMULATION_NAME}_finish): Use command_line.out_implib_filename
instead of pe_implib_filename.
* emultempl/pep.em (pep_implib_filename): Remove variable declaration.
(OPTION_IMPLIB_FILENAME): Remove enumerator.
(gld${EMULATION_NAME}_add_options): Remove --out-implib option.
(gld_${EMULATION_NAME}_list_options): Likewise.
(gld${EMULATION_NAME}_handle_option): Likewise.
(gld_${EMULATION_NAME}_finish): Use command_line.out_implib_filename
instead of pep_implib_filename.
* ld.h (args_type): Declare new out_implib_filename field.
* ld.texinfo (--out-implib): Move documentation to arch-independent
part and rephrase to apply to ELF targets.
* ldexp.c (exp_fold_tree_1): Set ldscript_def field to 1 for symbols
defined in linker scripts.
* ldlex.h (enum option_values): Declare new OPTION_OUT_IMPLIB
enumerator.
* lexsup.c (ld_options): Add entry for new --out-implib switch.
(parse_args): Handle OPTION_OUT_IMPLIB case.
* testsuite/ld-elf/elf.exp (Generate empty import library): New test.
(Generate import library): Likewise.
* testsuite/ld-elf/implib.s: Likewise.
* testsuite/ld-elf/implib.rd: New file.
* testsuite/ld-elf/empty-implib.out: Likewise
John Baldwin [Sun, 3 Jul 2016 18:56:21 +0000 (11:56 -0700)]
Pass SIGLIBRT directly to child processes.
FreeBSD's librt uses SIGLIBRT as an internal signal to implement
SIGEV_THREAD sigevent notifications. Similar to SIGLWP or SIGCANCEL
this signal should be passed through to child processes by default.
include/ChangeLog:
* signals.def: Add GDB_SIGNAL_LIBRT.
gdb/ChangeLog:
* common/signals.c (gdb_signal_from_host): Handle SIGLIBRT.
(do_gdb_signal_to_host): Likewise.
* infrun.c (_initialize_infrun): Pass GDB_SIGNAL_LIBRT through to
programs.
* proc-events.c (signal_table): Add entry for SIGLIBRT.
Nick Clifton [Fri, 15 Jul 2016 11:00:03 +0000 (12:00 +0100)]
Tidy up debugging in the ARC port of the BFD library.
bfd * elf32-arc.c (PR_DEBUG): Delete.
Fix printing of debug information. Fix formatting of debug
statements.
(debug_arc_reloc): Handle symbols that are not from an input file.
(arc_do_relocation): Remove excessive exclamation points.
(elf_arc_relocate_section): Print an informative message if the
relocation fails, even if debugging is not enabled.
* arc-got.h: Fix formatting. Fix printing of debug information.
(new_got_entry_to_list): Use xmalloc.
* config.bfd: use the big-endian arc vector as the default vector
for big-endian arc targets.
ld * testsuite/ld-arc/arc.exp: Always run the sda-relocs test in
little endian mode.
Alan Modra [Fri, 15 Jul 2016 07:03:53 +0000 (16:33 +0930)]
Use address sized relocs in remove-relocs-01.s
Fixes failures on alpha, ia64, mcore, metag, moxie, and pj due to lack
of 16-bit relocs.
* testsuite/binutils-all/remove-relocs-01.s: Use .dc.a, not .word.
Alan Modra [Fri, 15 Jul 2016 07:32:00 +0000 (17:02 +0930)]
COFF buffer overflow in mark_relocs
* cofflink.c (mark_relocs): Exclude relocs with -1 r_symndx
from marking sym_indices.
GDB Administrator [Fri, 15 Jul 2016 00:00:23 +0000 (00:00 +0000)]
Automatic date update in version.in
Maciej W. Rozycki [Tue, 12 Jul 2016 00:31:29 +0000 (01:31 +0100)]
MIPS/GAS: Don't convert PC-relative REL relocs against absolute symbols
Don't convert PC-relative REL relocations against absolute symbols to
section-relative references and retain the original symbol reference
instead. Offsets into the absolute section may overflow the limited
range of their in-place addend field, causing an assembly error, e.g.:
$ cat test.s
.text
.globl foo
.ent foo
foo:
b bar
.end foo
.set bar, 0x12345678
$ as -EB -32 -o test.o test.s
test.s: Assembler messages:
test.s:3: Error: relocation overflow
$
With the original reference retained the source can now be assembled and
linked successfully:
$ as -EB -32 -o test.o test.s
$ objdump -dr test.o
test.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <foo>:
0:
1000ffff b 0 <foo>
0: R_MIPS_PC16 bar
4:
00000000 nop
...
$ ld -melf32btsmip -Ttext 0x12340000 -e foo -o test test.o
$ objdump -dr test
test: file format elf32-tradbigmips
Disassembly of section .text:
12340000 <foo>:
12340000:
1000159d b
12345678 <bar>
12340004:
00000000 nop
...
$
For simplicity always retain the original symbol reference, even if it
would indeed fit.
Making TC_FORCE_RELOCATION_ABS separate from TC_FORCE_RELOCATION causes
R_MICROMIPS_PC7_S1, R_MICROMIPS_PC10_S1 and R_MICROMIPS_PC16_S1 branch
relocations against absolute symbols to be converted on RELA targets to
section-relative references. This is an intended effect of this change.
Absolute symbols carry no ISA annotation in their `st_other' field and
their value is not going to change with linker relaxation, so it is safe
to discard the original reference and keep the calculated final symbol
value only in the relocation's addend.
Similarly R6 R_MIPS_PCHI16 and R_MIPS_PCLO16 relocations referring
absolute symbols can be safely converted even on REL targets, as there
the in-place addend of these relocations covers the entire 32-bit
address space so it can hold the calculated final symbol value, and
likewise the value referred won't be affected by any linker relaxation.
Add a set of suitable test cases and enable REL linker tests which now
work and were previously used as dump patterns for RELA tests only.
gas/
* config/tc-mips.h (TC_FORCE_RELOCATION_ABS): New macro.
(mips_force_relocation_abs): New prototype.
* config/tc-mips.c (mips_force_relocation_abs): New function.
* testsuite/gas/mips/branch-absolute.d: Adjust dump patterns.
* testsuite/gas/mips/mips16-branch-absolute.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n32.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n64.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n32.d:
Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n64.d:
Likewise.
* testsuite/gas/mips/branch-absolute-addend.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend.d: New test.
* testsuite/gas/mips/micromips-branch-absolute-addend.d: New
test.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/mips-elf.exp: Run
`branch-absolute-addend', `mips16-branch-absolute',
`mips16-branch-absolute-addend' and
`micromips-branch-absolute-addend'.
Maciej W. Rozycki [Tue, 12 Jul 2016 00:30:48 +0000 (01:30 +0100)]
MIPS/GAS: Keep the ISA bit in the addend of branch relocations
Correct a problem with the ISA bit being stripped from the addend of
compressed branch relocations, affecting RELA targets. It has been
there since microMIPS support has been added, with:
commit
df58fc944dbc6d5efd8d3826241b64b6af22f447
Author: Richard Sandiford <rdsandiford@googlemail.com>
Date: Sun Jul 24 14:20:15 2011 +0000
<https://sourceware.org/ml/binutils/2011-07/msg00198.html>, ("MIPS:
microMIPS ASE support") and R_MICROMIPS_PC7_S1, R_MICROMIPS_PC10_S1 and
R_MICROMIPS_PC16_S1 relocations originally affected, and the
R_MIPS16_PC16_S1 relocation recently added with commit
c9775dde3277
("MIPS16: Add R_MIPS16_PC16_S1 branch relocation support") actually
triggering a linker error, due to its heightened processing strictness
level:
$ cat test.s
.text
.set mips16
foo:
b bar
.set bar, 0x1235
.align 4, 0
$ as -EB -n32 -o test.o test.s
$ objdump -dr test.o
test.o: file format elf32-ntradbigmips
Disassembly of section .text:
00000000 <foo>:
0: f000 1000 b 4 <foo+0x4>
0: R_MIPS16_PC16_S1 *ABS*+0x1230
...
$ ld -melf32btsmipn32 -Ttext 0 -e 0 -o test test.o
test.o: In function `foo':
(.text+0x0): Branch to a non-instruction-aligned address
$
This is because the ISA bit of the branch target does not match the ISA
bit of the referring branch, hardwired to 1 of course.
Retain the ISA bit then, so that the linker knows this is really MIPS16
code referred:
$ objdump -dr fixed.o
fixed.o: file format elf32-ntradbigmips
Disassembly of section .text:
00000000 <foo>:
0: f000 1000 b 4 <foo+0x4>
0: R_MIPS16_PC16_S1 *ABS*+0x1231
...
$ ld -melf32btsmipn32 -Ttext 0 -e 0 -o fixed fixed.o
$
Add a set of MIPS16 tests to cover the relevant cases, excluding linker
tests though which would overflow the in-place addend on REL targets and
use them as dump patterns for RELA targets only.
gas/
* config/tc-mips.c (md_apply_fix) <BFD_RELOC_MIPS16_16_PCREL_S1>
<BFD_RELOC_MICROMIPS_7_PCREL_S1, BFD_RELOC_MICROMIPS_10_PCREL_S1>
<BFD_RELOC_MICROMIPS_16_PCREL_S1>: Keep the ISA bit in the
addend calculated.
* testsuite/gas/mips/mips16-branch-absolute.s: Set the ISA bit
in `bar', export `foo'.
* testsuite/gas/mips/mips16-branch-absolute.d: Adjust
accordingly.
* testsuite/gas/mips/mips16-branch-absolute-n32.d: Likewise.
* testsuite/gas/mips/mips16-branch-absolute-n64.d: Likewise.
* testsuite/gas/mips/mips16-branch-absolute-addend-n32.d:
Likewise.
* testsuite/gas/mips/mips16-branch-absolute-addend-n64.d:
Likewise.
ld/
* testsuite/ld-mips-elf/mips16-branch-absolute.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n32.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n64.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-n32.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-n64.d: New
test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests, except
from `mips16-branch-absolute' and
`mips16-branch-absolute-addend', referred indirectly only.
Maciej W. Rozycki [Tue, 12 Jul 2016 00:30:01 +0000 (01:30 +0100)]
BFD: Let targets handle relocations against absolute symbols
Fix a generic BFD issue with relocations against absolute symbols, which
are installed without using any individual relocation handler provided
by the backend. This causes any absolute section's addend to be lost on
REL targets such as o32 MIPS, and also relocation-specific calculation
adjustments are not made.
As an example assembling this program:
$ cat test.s
.text
foo:
b bar
b baz
.set bar, 0x1234
$ as -EB -32 -o test-o32.o test.s
$ as -EB -n32 -o test-n32.o test.s
produces this binary code:
$ objdump -dr test-o32.o test-n32.o
test-o32.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <foo>:
0:
10000000 b 4 <foo+0x4>
0: R_MIPS_PC16 *ABS*
4:
00000000 nop
8:
1000ffff b 8 <foo+0x8>
8: R_MIPS_PC16 baz
c:
00000000 nop
test-n32.o: file format elf32-ntradbigmips
Disassembly of section .text:
00000000 <foo>:
0:
10000000 b 4 <foo+0x4>
0: R_MIPS_PC16 *ABS*+0x1230
4:
00000000 nop
8:
10000000 b c <foo+0xc>
8: R_MIPS_PC16 baz-0x4
c:
00000000 nop
$
where it is clearly visible in `test-o32.o', which uses REL relocations,
that the absolute section's addend equivalent to the value of `bar' -- a
reference to which cannot be fully resolved at the assembly time,
because the reference is PC-relative -- has been lost, as has been the
relocation-specific adjustment of -4, required to take into account the
PC+4-relative calculation made by hardware with branches and seen in the
external symbol reference to `baz' as the `ffff' addend encoded in the
instruction word. In `test-n32.o', which uses RELA relocations, the
absolute section's addend has been correctly retained.
Give precedence then in `bfd_perform_relocation' and
`bfd_install_relocation' to any individual relocation handler the
backend selected may have provided, while still resorting to the generic
calculation otherwise. This retains the semantics which we've had since
forever or before the beginning of our repository history, and is at the
very least compatible with `bfd_elf_generic_reloc' being used as the
handler.
Retain the `bfd_is_und_section' check unchanged at the beginning of
`bfd_perform_relocation' since this does not affect the semantics of the
function. The check returns the same `bfd_reloc_undefined' code the
check for a null `howto' does, so swapping the two does not matter.
Also the check is is mutually exclusive with the `bfd_is_abs_section'
check, since a section cannot be absolute and undefined both at once, so
swapping the two does not matter either.
With this change applied the program quoted above now has the in-place
addend correctly calculated and installed in the field being relocated:
$ objdump -dr fixed-o32.o
fixed-o32.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <foo>:
0:
1000048c b 1234 <bar>
0: R_MIPS_PC16 *ABS*
4:
00000000 nop
8:
1000ffff b 8 <foo+0x8>
8: R_MIPS_PC16 baz
c:
00000000 nop
$
Add a set of MIPS tests to cover the relevant cases, including absolute
symbols with addends, and verifying that PC-relative relocations against
symbols concerned resolve to the same value in the final link regardless
of whether the REL or the RELA relocation form is used. Exclude linker
tests though which would overflow the in-place addend on REL targets and
use them as dump patterns for RELA targets only.
bfd/
* reloc.c (bfd_perform_relocation): Try the `howto' handler
first with relocations against absolute symbols.
(bfd_install_relocation): Likewise.
gas/
* testsuite/gas/mips/mips16-branch-absolute.d: Update patterns.
* testsuite/gas/mips/branch-absolute.d: New test.
* testsuite/gas/mips/branch-absolute-n32.d: New test.
* testsuite/gas/mips/branch-absolute-n64.d: New test.
* testsuite/gas/mips/branch-absolute-addend-n32.d: New test.
* testsuite/gas/mips/branch-absolute-addend-n64.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-n32.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-n64.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend-n32.d: New
test.
* testsuite/gas/mips/mips16-branch-absolute-addend-n64.d: New
test.
* testsuite/gas/mips/micromips-branch-absolute.d: New test.
* testsuite/gas/mips/micromips-branch-absolute-n32.d: New test.
* testsuite/gas/mips/micromips-branch-absolute-n64.d: New test.
* testsuite/gas/mips/micromips-branch-absolute-addend-n32.d: New
test.
* testsuite/gas/mips/micromips-branch-absolute-addend-n64.d: New
test.
* testsuite/gas/mips/branch-absolute.s: New test source.
* testsuite/gas/mips/branch-absolute-addend.s: New test source.
* testsuite/gas/mips/mips16-branch-absolute-addend.s: New test
source.
* testsuite/gas/mips/micromips-branch-absolute.s: New test
source.
* testsuite/gas/mips/micromips-branch-absolute-addend.s: New
test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/branch-absolute.d: New test.
* testsuite/ld-mips-elf/branch-absolute-n32.d: New test.
* testsuite/ld-mips-elf/branch-absolute-n64.d: New test.
* testsuite/ld-mips-elf/branch-absolute-addend.d: New test.
* testsuite/ld-mips-elf/branch-absolute-addend-n32.d: New test.
* testsuite/ld-mips-elf/branch-absolute-addend-n64.d: New test.
* testsuite/ld-mips-elf/micromips-branch-absolute.d: New test.
* testsuite/ld-mips-elf/micromips-branch-absolute-n32.d: New
test.
* testsuite/ld-mips-elf/micromips-branch-absolute-n64.d: New
test.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend.d: New
test.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend-n32.d:
New test.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend-n64.d:
New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests, except
from `branch-absolute-addend' and
`micromips-branch-absolute-addend', referred indirectly only.
Tom Tromey [Thu, 14 Jul 2016 17:50:55 +0000 (11:50 -0600)]
Add missing newline to py-breakpoint.c
In https://sourceware.org/ml/gdb-patches/2016-07/msg00152.html,
Yao noted that a patch of mine was missing a newline.
I thought I had fixed this but when looking today I realized it was
not fixed. This patch adds it.
I'm checking this in as obvious.
2016-07-14 Tom Tromey <tom@tromey.com>
* python/py-breakpoint.c (gdbpy_breakpoint_deleted): Add missing
newline.
Tom Tromey [Mon, 6 Jun 2016 20:18:30 +0000 (14:18 -0600)]
Remove unused variables
This patch removes set-but-unused variables. This holds all the
removals I consider to be simple and relatively uncontroversial.
2016-07-14 Tom Tromey <tom@tromey.com>
* mips-tdep.c (micromips_scan_prologue): Remove "frame_addr".
(mips_o32_push_dummy_call): Remove "stack_used_p".
* aarch64-tdep.c (aarch64_record_data_proc_imm): Remove
"insn_bit28".
* rust-lang.c (rust_print_type): Remove "len".
* rust-exp.y (super_name): Remove "current_len".
* python/py-framefilter.c (py_print_type): Remove "type".
* mdebugread.c (parse_partial_symbols): Remove
"past_first_source_file".
<N_SO>: Remove "valu", "first_so_symnum", "prev_textlow_not_set".
* m2-valprint.c (m2_print_unbounded_array): Remove
"content_type".
(m2_val_print): Remove "i".
* linespec.c (unexpected_linespec_error): Remove "cleanup".
* f-valprint.c (f_val_print): Remove "i".
* elfread.c (elf_symtab_read): Remove "offset".
* dwarf2-frame.c (dwarf2_fetch_cfa_info): Remove "addr_size".
* jit.c (jit_dealloc_cache): Remove "i" and "frame_arch".
Tom Tromey [Mon, 6 Jun 2016 20:18:23 +0000 (14:18 -0600)]
Remove some variables but call functions for side effects
This patch consolidates the (possibly-questionable) spots where we
remove a declaration but continue to call some function for side
effects. In a couple of cases it wasn't entirely clear to me that
this mattered; and in some other cases it might be more aesthetically
pleasing to use ATTRIBUTE_UNUSED. So, I broke this out into a
separate patch for simpler review.
2016-07-14 Tom Tromey <tom@tromey.com>
* arch-utils.c (default_skip_permanent_breakpoint): Remove
"bp_insn".
* disasm.c (do_assembly_only): Remove "num_displayed".
* dwarf2read.c (read_abbrev_offset): Remove "length".
(dwarf_decode_macro_bytes) <DW_MACINFO_vendor_ext>: Remove
"constant".
* m32c-tdep.c (make_regs): Remove "r2hl", "r3hl", and "intbhl".
* microblaze-tdep.c (microblaze_frame_cache): Remove "func".
* tracefile.c (trace_save): Remove "status".
Tom Tromey [Mon, 6 Jun 2016 19:45:59 +0000 (13:45 -0600)]
Remove some unused overlay code
This patch removes some unneeded initializations in overlay code in
symfile.c. It also deletes some old commented-out code.
2016-07-14 Tom Tromey <tom@tromey.com>
* symfile.c (simple_overlay_update_1): Remove initialization
of "size", and commented-out code.
(simple_overlay_update): Likewise.
Tom Tromey [Tue, 28 Jun 2016 20:25:49 +0000 (14:25 -0600)]
Use getcurx in curses code
As suggested by Pedro, this changes a few spots to use getcurx, rather
than getyx. This avoids some unused variable warnings.
2016-07-14 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.c (tui_show_source_line): Use getcurx.
* tui/tui-io.c (tui_puts): Use getcurx.
(tui_redisplay_readline): Likewise.
Tom Tromey [Mon, 6 Jun 2016 19:43:50 +0000 (13:43 -0600)]
Add one use of ATTRIBUTE_UNUSED
One spot needed ATTRIBUTE_UNUSED to cope with the new warnings.
The case in inflow.c is just a mass of ifdefs; and while the only use
of "result" is guarded by "#if 0", I thought it simplest to leave it
all in place.
2016-07-14 Tom Tromey <tom@tromey.com>
* inflow.c (child_terminal_ours_1): Use ATTRIBUTE_UNUSED.
Tom Tromey [Mon, 6 Jun 2016 19:01:52 +0000 (13:01 -0600)]
Change reopen_exec_file to check result of stat
This seems to be a real bug found by -Wunused-but-set-variable. If
"stat" fails for some reason, gdb would use the uninitialized "st".
2016-07-14 Tom Tromey <tom@tromey.com>
* corefile.c (reopen_exec_file): Only examine st.st_mtime if stat
succeeded.
Andrew Burgess [Fri, 21 Aug 2015 19:08:26 +0000 (20:08 +0100)]
objcopy/strip: Add option --remove-relocations=SECTIONPATTERN
The objcopy and strip tools make use of the bfd library to manipulate
the state of the input file (to produce an output file). Within the
input file (for ELF at least), relocations are held within a section,
and so, if the user wanted to remove the relocations, but keep the
section to which the relocations would have been applied, it is tempting
to think that specifying the name of a relocation section to objcopy's
--remove-section option might do what you want, for example:
objcopy --remove-section=.rela.text input.elf output.elf
However, this does not work. The reason is that when the input file is
loaded, relocations are not managed as sections, but are, instead,
loaded as data associated with the section to which the relocations
would be applied. In our example above the relocations in '.rela.text'
are held as data on the section '.text' once 'input.elf' is loaded.
One task that objcopy and strip do is copy the relocations from the
input file to the output file if the section is also being copied from
the input file to the output file.
This commit adds a new command line option for objcopy and strip,
--remove-relocations, which can be used to remove the relocations, while
keeping the section that the relocations would have been applied to, for
example:
objcopy --remove-relocations=.text input.elf output.elf
in this case the section '.text' will appear in both 'input.elf' and
'output.elf', but any relocations in 'input.elf' that apply to '.text'
will not be present in 'output.elf'.
I have also added a special case to the handling of --remove-section
that spots if a user tries to remove a relocation section (currently
this is done by spotting the '.rela.' or '.rel.' prefix) and forwards
the request to --remove-relocations.
As with --remove-section and --only-section the --remove-relocations
option supports the '!' prefix on the section-patterns it takes to allow
for sections to be specifically not matched.
There are tests for all the new functionality.
binutils/ChangeLog:
* doc/binutils.texi (objcopy): Document 'remove-relocations'.
(strip): Likewise.
* objcopy.c (SECTION_CONTEXT_REMOVE_RELOCS): Define.
(enum command_line_switch): Add 'OPTION_REMOVE_RELOCS'.
(struct option strip_options): Add 'remove-relocations'.
(struct option copy_options): Likewise.
(copy_usage): Likewise.
(strip_usage): Likewise.
(handle_remove_relocations_option): New function.
(discard_relocations): New function.
(handle_remove_section_option): New function.
(copy_relocations_in_section): Use discard_relocations.
(strip_main): Use handle_remove_section_option for
'remove-section', and handle 'remove-relocations' option.
(copy_main): Likewise.
* testsuite/binutils-all/objcopy.exp: Run new tests.
* testsuite/binutils-all/remove-relocs-01.d: New file.
* testsuite/binutils-all/remove-relocs-01.s: New file.
* testsuite/binutils-all/remove-relocs-02.d: New file.
* testsuite/binutils-all/remove-relocs-03.d: New file.
* testsuite/binutils-all/remove-relocs-04.d: New file.
* testsuite/binutils-all/remove-relocs-05.d: New file.
* testsuite/binutils-all/remove-relocs-06.d: New file.
Andrew Burgess [Mon, 24 Aug 2015 12:02:39 +0000 (13:02 +0100)]
objcopy/strip: Allow section patterns starting with '!'.
For symbol matching, prefixing a pattern with '!' will indicate a
non-matching pattern, however, this is not the case for section
patterns. As a result it is not possible to say "apply this action to
all sections except ...".
With this commit the objcopy and strip tools now support '!' prefix for
section patterns, so we can say:
objcopy --remove-section="*" --remove-section="!.text*"
Which will remove all sections, except those matching the pattern
'.text*'.
binutils/ChangeLog:
* objcopy.c (find_section_list): Handle section patterns starting
with '!' being a non-matching pattern.
* doc/binutils.texi (objcopy): Give example of using '!' with
--remove-section and --only-section.
(strip): Give example of using '!' with --remove-section.
* testsuite/binutils-all/data-sections.s: New file.
* testsuite/binutils-all/only-section-01.d: New file.
* testsuite/binutils-all/remove-section-01.d: New file.
* testsuite/binutils-all/objcopy.exp: Run new tests.
* NEWS: Mention new feature.
Nick Clifton [Thu, 14 Jul 2016 09:38:07 +0000 (10:38 +0100)]
Small improvements to the ARM simulator to cope with illegal binaries.
* armemu.c (Multiply64): Only issue error messages about invalid
arguments if debugging is enabled.
* armos.c (ARMul_OSHandleSWI): Ignore invalid flags.
Claudiu Zissulescu [Fri, 8 Jul 2016 09:55:49 +0000 (11:55 +0200)]
[ARC] Fix/improve small data support.
The R_ARC_SDA32 is wrongly described as a ME relocation, fix it. Offset the
__SDATA_BEGIN__ to take advantage of the signed 9-bit field of the
load/store instructions.
include/
2016-07-08 Claudiu Zissulescu <claziss@synopsys.com>
* elf/arc-reloc.def (ARC_SDA32): Don't use ME transformation.
ld/
2016-07-08 Claudiu Zissulescu <claziss@synopsys.com>
* emulparams/arcelf.sh (SDATA_START_SYMBOLS): Add offset.
* testsuite/ld-arc/sda-relocs.dd: New file.
* testsuite/ld-arc/sda-relocs.ld: Likewise.
* testsuite/ld-arc/sda-relocs.rd: Likewise.
* testsuite/ld-arc/sda-relocs.s: Likewise.
* testsuite/ld-arc/arc.exp: Add SDA tests.
GDB Administrator [Thu, 14 Jul 2016 00:00:24 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom Tromey [Tue, 5 May 2015 03:49:11 +0000 (21:49 -0600)]
PR python/15620, PR python/18620 - breakpoint events in Python
This patch adds some breakpoint events to Python. In particular,
there is a creation event that is emitted when a breakpoint is
created; a modification event that is emitted when a breakpoint
changes somehow; and a deletion event that is emitted when a
breakpoint is deleted.
In this patch, the event's payload is the breakpoint itself. I
considered making a new event type to hold the breakpoint, but I
didn't see a need. Still, I thought I would mention this as a spot
where some other choice is possible.
Built and regtested on x86-64 Fedora 23.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/15620, PR python/18620:
* python/py-evts.c (gdbpy_initialize_py_events): Call
add_new_registry for new events.
* python/py-events.h (events_object) <breakpoint_created,
breakpoint_deleted, breakpoint_modified>: New fields.
* python/py-breakpoint.c (gdbpy_breakpoint_created): Emit the
breakpoint changed event.
(gdbpy_breakpoint_deleted): Emit the breakpoint deleted event.
(gdbpy_breakpoint_modified): New function.
(gdbpy_initialize_breakpoints): Attach to the breakpoint modified
observer.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/15620, PR python/18620:
* python.texi (Events In Python): Document new breakpoint events.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/15620, PR python/18620:
* gdb.python/py-breakpoint.exp (connect_event, check_last_event)
(test_bkpt_events): New procs.
Tom Tromey [Thu, 19 May 2016 21:51:00 +0000 (15:51 -0600)]
PR python/17698 - add Breakpoint.pending
This patch adds a "pending" attribute to gdb.Breakpoint.
Built and regtested on x86-64 Fedora 23.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/17698:
* NEWS: Update.
* python/py-breakpoint.c (bppy_get_pending): New function.
(breakpoint_object_getset): Add entry for "pending".
* breakpoint.h (pending_breakpoint_p): Declare.
* breakpoint.c (pending_breakpoint_p): New function.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/17698:
* python.texi (Breakpoints In Python): Document
Breakpoint.pending.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/17698:
* gdb.python/py-breakpoint.exp (test_bkpt_basic): Add "pending"
test.
(test_watchpoints): Likewise.
(test_bkpt_pending): New proc.
Tom Tromey [Thu, 19 May 2016 21:52:52 +0000 (15:52 -0600)]
use user_breakpoint_p in python code
I noticed that bppy_get_visibility and gdbpy_breakpoint_created
implemented their own visibility checks, but subtly different from
user_breakpoint_p. I think the latter is more correct, and so changed
the Python code to use it.
I suspect there isn't a decent way to test this, so no new test.
Built and regtested on x86-64 Fedora 23.
2016-07-13 Tom Tromey <tom@tromey.com>
* python/py-breakpoint.c (bppy_get_visibility)
(gdbpy_breakpoint_created): Use user_breakpoint_p.
Tom Tromey [Thu, 19 May 2016 21:40:54 +0000 (15:40 -0600)]
Rearrange Python breakpoint node in documentation
I noticed that the Python breakpoint documentation was ordered a bit
oddly. It documented the constructor; then the stop method; then the
watchpoint constants (used for the constructor); then various other
methods and attributes; then the other constants used by the
constructor; and then finally some more methods and attributes.
This patch rearranges the node a little to move the constants to just
after the constructor and before the other methods and attributes.
2016-07-13 Tom Tromey <tom@tromey.com>
* python.texi (Breakpoints In Python): Move table of types and
table of watchpoint types earlier in node.
Tom Tromey [Mon, 2 Mar 2015 03:33:00 +0000 (20:33 -0700)]
Fix PR cli/18053
PR cli/18053 concerns a couple of minor bugs in the JIT debuginfo
support. First, jit-reader-load should use filename completion and
support tilde expansion. Second, the help for jit-reader-unload is
incorrect. While working on this I also realized that
jit-reader-unload should use the no-op completer, so I've included
that as well.
Built and regtested on x86-64 Fedora 23. A completer test for
jit-reader-load is included, but not a tilde-expansion test, as I
couldn't think of a reliable way to test that.
2016-07-13 Tom Tromey <tom@tromey.com>
PR cli/18053:
* jit.c (jit_reader_load_command): Use tilde_expand.
(_initialize_jit): Fix help for jit-reader-unload. Set completer
for new commands.
2016-07-13 Tom Tromey <tom@tromey.com>
PR cli/18053:
* gdb.base/jit-so.exp (one_jit_test): Add jit-reader-load
completion test.
Maciej W. Rozycki [Fri, 8 Jul 2016 15:07:39 +0000 (16:07 +0100)]
MIPS/opcodes: Address issues with NAL disassembly
Address issues with the disassembly of the NAL assembly idiom and R6
instruction introduced with commit
7361da2c952e ("Add support for MIPS
R6.") and then further tweaked with commit
b9121b573e2e ("Add in a JALRC
alias and fix the NAL instruction."). As from R6 this instruction has
replaced the encoding of `bltzal $0, . + 4' as the solely supported form
of the former BLTZAL instruction for the regular MIPS ISA.
The instruction is marked as an alias only in our regular MIPS opcode
table, making it fail to disassemble in R6 code if the `no-aliases'
machine option has been passed to `objdump':
$ cat test.s
.text
foo:
nal
$ as -mips64r6 -o test.o test.s
$ objdump -dr --prefix-addresses --show-raw-insn -M no-aliases test.o
nal.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <foo>
04100000 0x4100000
...
$
This is because the `bltzal' entry has been marked as pre-R6 only in the
opcode table and there is no other opcode pattern to match.
Additionally the changes referred made NAL replace the equivalent
`bltzal $0, . + 4' instruction in disassembly, unless the `no-aliases'
machine option has been used, in legacy code. Seeing NAL, especially in
its updated form lacking the branch target argument, in the disassembly
of such code may be confusing to people. This is because unlike with
EHB only used in R2 and newer code -- the machine encoding of which we
anyway always disassemble to its corresponding current architecture's
mnemonic rather than its legacy meaning of `sll $0, $0, 3' -- BLTZAL has
been indeed used in legacy code. Even though `bltzal $0, . + 8' and its
machine code encoding (0x04100001) -- which is not equivalent to NAL and
still disassembles as BLTZAL -- has been the predominant form as opposed
to NAL's `bltzal $0, . + 4' (0x04100000), it makes sense to always keep
the old form in disassembly, while still accepting `nal' in assembly.
Remove the alias marking then from the the `nal' instruction pattern,
making it always match for R6 code, even with the `no-aliases' option.
And move the entry beyond the `bltzal' entry, making the latter one take
precedence for legacy binary code, while letting the former still match
any `nal' mnemonic in source code assembled for a legacy target.
Add a suitable test case to the GAS test suite. While the change
affects the disassembler more than the assembler, so placing the test
case in the binutils test suite might be more appropriate, the intent is
also to verify that `nal' is still accepted by GAS for legacy targets,
plus we have test infrastructure available in the GAS test suite for
automatic multiple ISA level testing, which we lack from the binutils
framework.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Remove the INSN2_ALIAS
annotation from the "nal" entry and reorder it beyond "bltzal".
gas/
* testsuite/gas/mips/nal-1.d: New test.
* testsuite/gas/mips/mipsr6@nal-1.d: New test.
* testsuite/gas/mips/nal-2.d: New test.
* testsuite/gas/mips/mipsr6@nal-2.d: New test.
* testsuite/gas/mips/nal.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Maciej W. Rozycki [Wed, 13 Jul 2016 16:31:17 +0000 (17:31 +0100)]
MIPS/GAS: Remove extraneous `install_insn' call from `append_insn' (CL)
Add missing ChangeLog entry for commit
b8bca85b334b ("MIPS/GAS: Remove
extraneous `install_insn' call from `append_insn'").
Jose E. Marchesi [Wed, 13 Jul 2016 08:42:28 +0000 (01:42 -0700)]
opcodes,gas: support for the ldtxa SPARC instructions.
This patch adds support for the LDTXA instructions, along with the
corresponding ASIs. Tests for GAS are included.
opcodes/ChangeLog:
2016-07-12 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (ldtxa): New macro.
(sparc_opcodes): Use the macro defined above to add entries for
the LDTXA instructions.
(asi_table): Add the ASI_TWINX_* asis used in the LDTXA
instruction.
gas/ChangeLog:
2016-07-12 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/sparc/ldtxa.s: New file.
* testsuite/gas/sparc/ldtxa.d: Likewise.
* testsuite/gas/sparc/sparc.exp: Execute the ldtxa test.
Jan Kratochvil [Wed, 13 Jul 2016 11:58:19 +0000 (13:58 +0200)]
[ppc64] Fix for function descriptors
Marin Cermak has found various testcases (or one of them) of GDB FAIL on
ppc64.
https://sourceware.org/bugzilla/show_bug.cgi?id=20328
.o contained only the function descriptor address.
The DWARF as produced by Tcl Dwarf::assemble:
<1><27>: Abbrev Number: 4 (DW_TAG_subprogram)
<28> DW_AT_name : main
<2d> DW_AT_external : 1
<2e> DW_AT_low_pc : 0x1001ff98
<36> DW_AT_high_pc : 0x1002ff98
<2><3e>: Abbrev Number: 5 (DW_TAG_lexical_block)
Runtime info:
$2 = {<text variable, no debug info>} 0x10000674 <.main>
$3 = {void ()} 0x1001ff98 <main>
On Tue, 12 Jul 2016 15:22:49 +0200, Ulrich Weigand wrote:
Well, most of the gdb.dwarf2 test cases simply use explicitly placed labels
for the DW_AT_low_pc / DW_AT_high_pc attributes.
See e.g. dw2-unresolved-main.c:
asm (".globl cu_text_start");
asm ("cu_text_start:");
On Wed, 13 Jul 2016 10:54:00 +0200, Jan Kratochvil wrote:
Now I see I should not do that because:
lib/dwarf.exp:
proc function_range { func src } {
So I am providing this patch.
gdb/testsuite/ChangeLog
2016-07-13 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.dwarf2/atomic-type.exp: Use function_range for low_pc and high_pc.
* gdb.dwarf2/atomic.c (f): Rename f_end_lbl to f_label.
* gdb.dwarf2/dw2-bad-mips-linkage-name.c (f): Rename f_end_lbl to
f_label.
(g): Rename g_end_lbl to g_label.
* gdb.dwarf2/dw2-bad-mips-linkage-name.exp: Use function_range for
low_pc and high_pc.
* gdb.dwarf2/dw2-lexical-block-bare.exp: Likewise.
GDB Administrator [Wed, 13 Jul 2016 00:00:19 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Tue, 12 Jul 2016 22:33:47 +0000 (15:33 -0700)]
Align x86-64 .got/.got.plt sections to 8 bytes
Align x86-64 .got and .got.plt sections to their entry size.
* elf64-x86-64.c (elf_x86_64_create_dynamic_sections): Align
.got/.got.plt sections to 8 bytes.
Tom Tromey [Thu, 9 Jun 2016 21:20:09 +0000 (15:20 -0600)]
PR python/19293 - invalidate frame cache when unwinders change
PR python/19293 notes that when a Python unwinder is disabled, the
frame cache is not invalidated. This means that disabling an unwinder
doesn't have any immediate effect -- but in my experience it's often
the case that I want to enable or disable an unwinder in order to see
what happens.
This patch adds a new gdb.invalidate_cached_frames function and
arranges for the relevant bits of library code to call it. I've only
partially documented this function, considering a warning sufficient
without going into all the reasons ordinary code should not call it.
The name of the new function was taken from a comment in frame.h next
to reinit_frame_cache.
No new test as I think the updates to the existing test are sufficient
to show that the code is working as intended.
Built and regtested on x86-64 Fedora 23.
2016-07-12 Tom Tromey <tom@tromey.com>
PR python/19293:
* python/lib/gdb/command/unwinders.py (do_enable_unwinder): Call
gdb.invalidate_cached_frames.
* python/lib/gdb/unwinder.py (register_unwinder): Call
gdb.invalidate_cached_frames.
* python/python.c (gdbpy_invalidate_cached_frames): New function.
(python_GdbMethods): Add entry for invalidate_cached_frames.
2016-07-12 Tom Tromey <tom@tromey.com>
PR python/19293:
* python.texi (Frames In Python): Document
gdb.invalidate_cached_frames.
2016-07-12 Tom Tromey <tom@tromey.com>
PR python/19293:
* gdb.python/py-unwind-maint.exp: Update tests.
Nick Clifton [Tue, 12 Jul 2016 14:46:02 +0000 (15:46 +0100)]
Second fix for grammar in error message.
* binary.c (binary_set_section_contents): Second grammar fix.
Yao Qi [Tue, 12 Jul 2016 14:39:34 +0000 (15:39 +0100)]
Match the selftest output when captured_main is inlined
In gdb.gdb/observer.exp, I see the following fail,
(gdb) break captured_main^M
Breakpoint 1 at 0x57e409: file ../../binutils-gdb/gdb/main.c, line 492.^M
(gdb) PASS: gdb.gdb/observer.exp: breakpoint in captured_main
run -nw -nx -data-directory /home/yao.qi/SourceCode/gnu/build/gdb/testsuite/../data-directory^M
Starting program: /home/yao.qi/SourceCode/gnu/build/gdb/testsuite/outputs/gdb.gdb/observer/xgdb -nw -nx -data-directory /home/yao.qi/SourceCode/gnu/build/gdb/testsuite/../data-directory^M
[Thread debugging using libthread_db enabled]^M
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".^M
^M
Breakpoint 1, gdb_main (args=args@entry=0x7fffffffdca0) at ../../binutils-gdb/gdb/main.c:1157^M
1157 captured_main (args);^M
(gdb) FAIL: gdb.gdb/observer.exp: run until breakpoint at captured_main
looks the test sets breakpoint on captured_main, and expects program
stops at captured_main. However, program stops at the place where
captured_main is called, because captured_main is inlined,
<1><8519e3>: Abbrev Number: 58 (DW_TAG_subprogram)
<8519e4> DW_AT_name : (indirect string, offset: 0x880d3): captured_main
<8519e8> DW_AT_decl_file : 1
<8519e9> DW_AT_decl_line : 444
<8519eb> DW_AT_type : <0x846e48>
<8519ef> DW_AT_inline : 1 (inlined)
<8519f0> DW_AT_sibling : <0x851c01>
The test passes if I build GDB with '-O0 -g3', because captured_main
isn't inlined. This patch is to match the output when captured_main
is inlined.
gdb/testsuite:
2016-07-12 Yao Qi <yao.qi@linaro.org>
* lib/selftest-support.exp (selftest_setup): Match the output
when captured_main is inlined.
Chung-Lin Tang [Tue, 12 Jul 2016 13:02:14 +0000 (06:02 -0700)]
Add type casts to allow C++ compile.
gdb/gdbserver/
* linux-nios2-low.c (nios2_fill_gregset): Add type cast
to buf parameter.
(nios2_store_gregset): Likewise.
Douglas B Rupp [Tue, 12 Jul 2016 10:05:13 +0000 (11:05 +0100)]
Fix grammar in error message.
* binary.c (binary_set_section_contents): Fix grammar in warning
message.
GDB Administrator [Tue, 12 Jul 2016 00:00:19 +0000 (00:00 +0000)]
Automatic date update in version.in
Claudiu Zissulescu [Mon, 11 Jul 2016 13:41:23 +0000 (15:41 +0200)]
[ARC] Update test.
ld/
2016-07-11 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/ld-arc/nps-1b.err: Update test to handle more
verbosity.
Claudiu Zissulescu [Thu, 30 Jun 2016 13:11:57 +0000 (15:11 +0200)]
TLS: DTPOFF can accept offsets, stored into addendum. Remove the need of base
gas/ChangeLog:
2016-07-05 Claudiu Zissulescu <claziss@synopsys.com>
* config/tc-arc.c (arc_reloc_op_tag): Allow complex ops for dtpoff.
(tc_gen_reloc): Remove passing DTPOFF base info into reloc addendum as it is
no longer needed.
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
Cupertino Miranda [Thu, 23 Jun 2016 09:38:30 +0000 (11:38 +0200)]
Enable relocation overflow messages by default.
bfd/ChangeLog:
2016-06-23 Cupertino Miranda <cmiranda@synopsys.com>
elf32-arc.c: made PR_DEBUG always defined.
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
Cupertino Miranda [Tue, 14 Jun 2016 20:55:44 +0000 (22:55 +0200)]
Fixes done to TLS.
TLS relocations did not support multiple TLS modes for the same
symbol in a single object file.
Refactored how GOT and TLS is implemented. Removed code duplications between
local and global symbols conditioning.
bfd/ChangeLog:
2016-06-14 Cupertino Miranda <cmiranda@synopsys.com>
* arc-got.h: Moved got related structures from elf32-arc.c to
this file. More precisely, tls_type_e, tls_got_entries, got_entry.
* (arc_get_local_got_ents,
got_entry_for_type,
new_got_entry_to_list,
tls_type_for_reloc,
symbol_has_entry_of_type,
get_got_entry_list_for_symbol,
arc_got_entry_type_for_reloc,
ADD_SYMBOL_REF_SEC_AND_RELOC,
arc_fill_got_info_for_reloc,
relocate_fix_got_relocs_for_got_info,
create_got_dynrelocs_for_single_entry,
create_got_dynrelocs_for_got_info): Added to file.
* elf32-arc.c: Removed GOT & TLS related structs and functions to
arc-got.h.
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
GDB Administrator [Mon, 11 Jul 2016 00:00:19 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sun, 10 Jul 2016 00:00:20 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Sat, 9 Jul 2016 04:55:31 +0000 (14:25 +0930)]
PR20337, Objdump makes poor choice of symbols
binutils/
PR binutils/20337
* objdump.c (compare_symbols): For ELF, sort same value/type
symbols according to size.
ld/
* testsuite/ld-powerpc/elfv2exe.d: Update.
GDB Administrator [Sat, 9 Jul 2016 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in
jamesbowman [Fri, 8 Jul 2016 18:53:31 +0000 (11:53 -0700)]
FT32: Correct 32-bit reloc for BFD_RELOC_32
The reloc for BFD_RELOC_32 was using the the 20-bit. This hack causes
problems in gdb. Fixed it to be the proper 32-bit reloc, R_FT32_32.
bfd/ChangeLog:
* elf32-ft32.c (ft32_reloc_map): Use R_FT32_32 for BFD_RELOC_32.
jamesbowman [Fri, 8 Jul 2016 18:38:35 +0000 (11:38 -0700)]
FT32: adjust disassembly opcode match fields
Tighten up the opcode match fields for conditional jump and call
instructions so more general opcodes don't match them in disassembly.
opcodes/ChangeLog:
* opcodes/ft32-opc.c (ft32_opc_info): Correct mask for "callc"
and "jmpc".
Maciej W. Rozycki [Fri, 8 Jul 2016 13:37:46 +0000 (14:37 +0100)]
MIPS/GAS: Remove extraneous `install_insn' call from `append_insn'
Complement:
commit
1e91584932efd70020c8c98037d0cb93a0552a20
Author: Richard Sandiford <rdsandiford@googlemail.com>
Date: Wed Mar 9 09:17:02 2005 +0000
<https://sourceware.org/ml/binutils/2005-03/msg00217.html>, ("Rework
MIPS nop-insertion code, add -mfix-vr4130 [5/11]"), and remove a call to
`install_insn' from `append_insn', which as from that change has become
redundant. This is because such a call, to place an instruction's bit
pattern in output, is already made from `move_insn', called from
`add_relaxed_insn' or `add_fixed_insn' as appropriate, either of which
now always is and has to be made from `append_insn' before the repeated
call to `install_insn' is made. Previously the place where this second
invocation is made was the only one where the output stream was updated,
although the update was made inline rather than with a function call.
Remove the repeated call then, to reclaim some performance.
gas/
* config/tc-mips.c (append_insn): Remove extraneous
`install_insn' call.
GDB Administrator [Fri, 8 Jul 2016 00:00:20 +0000 (00:00 +0000)]
Automatic date update in version.in
Walfred Tedeschi [Thu, 7 Jul 2016 17:07:36 +0000 (19:07 +0200)]
[obv] Fix broken build on Fedora 23.
Compiler complains about possible utilization of "symbol" which is member
of lang_def.
Initialization was added.
2016-07-07 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/ChangeLog:
* cp-namespace.c (cp_lookup_bare_symbol): Initialize
lang_this.symbol.
Walfred Tedeschi [Thu, 7 Jul 2016 15:33:05 +0000 (17:33 +0200)]
Fix of default lookup for "this" symbol.
Using the default lookup for the symbol "this" might lead to segmentation
fault in GDB.
Some languages, e.g. Fortran, use as default lookup routine the C++
routines.
For those languages "this" can be the instance of a class or even the
definition of a class.
When an instance of a class having the name "this" is evaluated
in GDB a segmentation fault was observed.
As example of the issue take into consideration the Fortran code:
type foo
real :: a
type(bar) :: x
character*7 :: b
end type foo
type(foo) :: this
Issue appears when evaluating the variable "this" in GDB.
Within the language definition structure there is a field that represents
the name of the special symbol used for the C++ "this" for the language
being described.
The fix presented here takes into account the aforementioned field. In the
case the aforementioned field is NULL "this" is not represented in the
language described and the lookup should return a null_block_symbol.
Tests: Performed tests with gfortran and ifort.
Reviewed:
https://sourceware.org/ml/gdb-patches/2016-04/msg00068.html
After the commited patch:
https://sourceware.org/ml/gdb-patches/2016-06/msg00364.html
Patch can be applied.
2016-06-16 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/ChangeLog:
* cp-namespace.c (cp_lookup_bare_symbol): Use language passed as
parameter to look for the symbol "this".
gdb/testsuite/ChangeLog:
* gdb.fortran/derived-types.exp (result_line, result_line_2):
New variables.
(print this%a, print this%b, print this): New tests.
* gdb.fortran/derived-types.f90 (this): New object and
initialization.
jamesbowman [Thu, 7 Jul 2016 01:55:25 +0000 (18:55 -0700)]
FT32 linker script cleanup
Fix a typo (__PMSIZE was written as __PMSIZE_) and add section alignment
for DATA and BSS.
ld/ChangeLog:
* scripttempl/ft32.sc (__PMSIZE): Correct __PMSIZE_.
(DATA): add ALIGN.
(BSS): add ALIGN
GDB Administrator [Thu, 7 Jul 2016 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Wed, 6 Jul 2016 14:18:10 +0000 (10:18 -0400)]
gdb.ada/arraydim.exp: Fix directory layout
I forgot to fix this one in the previous commit.
gdb/testsuite/ChangeLog:
* gdb.ada/arraydim.exp: Remove extra directory level in build
directory.
Simon Marchi [Wed, 6 Jul 2016 14:02:48 +0000 (10:02 -0400)]
Remove extra output directory level for Ada tests
The output of Ada tests create a layout where the test name
("formatted_ref" in this example) appears twice:
outputs
└── gdb.ada
└── formatted_ref
└── formatted_ref
├── b~formatted_ref.adb
├── b~formatted_ref.ads
├── b~formatted_ref.ali
├── b~formatted_ref.o
├── defs.ali
├── defs.o
├── formatted_ref
├── formatted_ref.ali
└── formatted_ref.o
This causes a problem when testing with the native-gdbserver board, when
the binary has the same name as the test. When gdb_remote_download is
called to upload the compiled binary, the implementation for
native-gdbserver copies it in the standard output directory (in
outputs/gdb.ada/formatted_ref). However, there is already a directory
named formatted_ref in there, so the copy fails and gdbserver isn't able
to load the binary.
This patch bypasses the problem by removing the extra directory level.
The compiled binary will already be in its final location in the
standard output directory, so the copy will effectively be a no-op.
gdb/testsuite/ChangeLog:
* lib/ada.exp: Remove extra directory level in build directory.
* gdb.ada/cond_lang.exp: Likewise.
* gdb.ada/exec_changed.exp: Likewise.
* gdb.ada/lang_switch.exp: Likewise.
John Baldwin [Mon, 20 Jun 2016 23:16:31 +0000 (16:16 -0700)]
Remove extraneous parentheses.
gdb/ChangeLog:
* h8300-tdep.c (h8300_print_register): Remove extraneous parentheses.
John Baldwin [Sat, 11 Jun 2016 20:18:15 +0000 (13:18 -0700)]
Use unsigned integer constant with left shifts.
This avoids undefined behavior.
gdb/ChangeLog:
* ada-lang.c (ada_unpack_from_contents): Use unsigned constants with
left shifts.
John Baldwin [Sat, 11 Jun 2016 14:43:46 +0000 (07:43 -0700)]
Set uses_fp for frames with a valid FP register explicitly.
Since CORE_ADDR is unsigned, the saved FP register is always greater than
or equal to zero. Replace the comparison by explicitly setting uses_fp to
1 for frames with a valid FP register.
gdb/ChangeLog:
* sh64-tdep.c (sh64_analyze_prologue): Set "uses_fp" when setting
the MEDIA_FP_REGNUM register.
John Baldwin [Sat, 11 Jun 2016 14:38:42 +0000 (07:38 -0700)]
Remove check for negative size.
Since CORE_ADDR is unsigned, this value can never be negative.
gdb/ChangeLog:
* score-tdep.c (score7_malloc_and_get_memblock): Remove check for
negative size.
John Baldwin [Fri, 1 Jul 2016 17:18:50 +0000 (10:18 -0700)]
Use 'ptid_t' instead of 'ptid' for fbsd_next_vfork_done's return type.
'ptid' compiles in C++, but not C.
gdb/ChangeLog:
* fbsd-nat.c (fbsd_is_vfork_done_pending): Fix return type.
Yao Qi [Tue, 5 Jul 2016 14:29:20 +0000 (15:29 +0100)]
[ARM] Fix endless recursion on calculating CPRC candidate
When GDB determines whether type T can be part of candidate for
passing and returning in VFP registers, it calls
arm_vfp_cprc_sub_candidate recursively. However, if type T has
self-reference field, like,
class C
{
static C s;
};
arm_vfp_cprc_sub_candidate won't return. This fix is to skip calling
arm_vfp_cprc_sub_candidate if the field is static.
gdb:
2016-07-06 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_vfp_cprc_sub_candidate): Don't call
arm_vfp_cprc_sub_candidate for static field.
Manish Goregaokar [Wed, 6 Jul 2016 05:25:10 +0000 (10:55 +0530)]
Allow subscripting raw pointers
This will be useful for dealing with vectors; regardless of our final solution
for the Index trait.
2016-07-06 Manish Goregaokar <manish@mozilla.com>
gdb/ChangeLog:
* rust-lang.c (rust_subscript): Allow subscripting pointers
gdb/testsuite/ChangeLog:
* simple.rs: Add test for raw pointer subscripting
* simple.exp: Add test expectations
GDB Administrator [Wed, 6 Jul 2016 00:00:20 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Tue, 5 Jul 2016 14:35:52 +0000 (07:35 -0700)]
Add -flto to PR ld/20321 test
Before GCC 4.9, -flto is required for final LTO link. Add -flto to PR
ld/20321 test to support older versions of GCC.
* testsuite/ld-plugin/lto.exp: Add -flto to PR ld/20321 test.
Yao Qi [Tue, 5 Jul 2016 13:46:21 +0000 (14:46 +0100)]
Fix fail in gdb.mi/mi-reverse.exp
Commit
38b022b4452f996fb5a8598f80d850b594621bcf adds "method" and
"format" fields in =record-started, but doesn't update test case
gdb.mi/mi-reverse.exp, so it causes the fail like this,
PASS: gdb.mi/mi-reverse.exp: mi runto main
Expecting: ^(-interpreter-exec console record[^M
]+)?(=record-started,thread-group="i1"^M
\^done[^M
]+[(]gdb[)] ^M
[ ]*)
-interpreter-exec console record^M
=record-started,thread-group="i1",method="full"^M
^done^M
(gdb) ^M
FAIL: gdb.mi/mi-reverse.exp: Turn on process record
and regression was found by buildbot too
https://sourceware.org/ml/gdb-testers/2016-q2/msg04492.html
gdb/testsuite:
2016-07-05 Yao Qi <yao.qi@linaro.org>
* gdb.mi/mi-reverse.exp: Match =record-started output.
Andre Vieria [Tue, 5 Jul 2016 10:39:06 +0000 (11:39 +0100)]
[ARM] Purecode compatible long branch veneer for M-profile targets with MOVW.
2016-07-05 Andre Vieria <andre.simoesdiasvieira@arm.com>
* elf32-arm.c (THUMB32_MOVT): New veneer macro.
(THUMB32_MOVW): Likewise.
(elf32_arm_stub_long_branch_thumb2_only_pure): New.
(DEF_STUBS): Define long_branch_thumb2_only_pure.
(arm_stub_is_thumb): Add new veneer stub.
(arm_type_of_stub): Use new veneer.
(arm_stub_required_alignment): Add new veneer.
2016-07-05 Andre Vieria <andre.simoesdiasvieira@arm.com>
* testsuite/ld-arm/farcall-thumb2-purecode.d: New test result.
* testsuite/ld-arm/farcall-thumb2-purecode.s: New test.
* testsuite/ld-arm/arm-elf.exp: Run it.
Andre Vieria [Tue, 5 Jul 2016 10:28:46 +0000 (11:28 +0100)]
[ARM] Change noread to purecode.
bfd/ChangeLog
2016-07-05 Andre Vieria <andre.simoesdiasvieira@arm.com>
* bfd-in2.h (SEC_ELF_NOREAD): Rename to ...
(SEC_ELF_PURECODE): ... this.
* elf32-arm.c (elf32_arm_post_process_headers): Rename SEC_ELF_NOREAD
to SEC_ELF_NOREAD.
(elf32_arm_fake_sections): Likewise.
(elf_32_arm_section_flags): Likewise.
(elf_32_arm_lookup_section_flags): Likewise.
* section.c (SEC_ELF_NOREAD): Rename to ...
(SEC_ELF_PURECODE): ... this.
binutils/ChangeLog
2016-07-05 Andre Vieria <andre.simoesdiasvieira@arm.com>
* objdump.c (dump_section_header): Rename SEC_ELF_NOREAD
to SEC_ELF_NOREAD.
* readelf.c (get_elf_section_flags): Rename ARM_NOREAD to
ARM_PURECODE and SHF_ARM_NOREAD to SHF_ARM_PURECODE.
(process_section_headers): Rename noread to purecode.
* section.c (SEC_ELF_NOREAD): Rename to ...
(SEC_ELF_PURECODE): ... this.
include/ChangeLog
2016-07-05 Andre Vieria <andre.simoesdiasvieira@arm.com>
* elf/arm.h (SHF_ARM_NOREAD): Rename to ...
(SHF_ARM_PURECODE): ... this.
ld/ChangeLog
2016-07-05 Andre Vieria <andre.simoesdiasvieira@arm.com>
* testsuite/ld-arm/arm_noread.ld: Renamed to ...
testsuite/ld-arm/arm_purecode.ld: ... this, and replaced
all noread's by purecode.
Jan Beulich [Tue, 5 Jul 2016 09:36:08 +0000 (11:36 +0200)]
ld: track linker-definedness of symbols
Keep "lineno" as zero while not processing any script, and use it being
zero to set the "linker_def" field to true.
Jan Beulich [Tue, 5 Jul 2016 09:14:51 +0000 (11:14 +0200)]
x86: fix register check in check_qword_reg()
A missing 'r' (or wrong 'e') register prefix needs to be complained
about if the template allows for a 64-bit register, not a 32-bit one.
I assume this was a copy-and-paste type of mistake
(from check_long_reg()).
Jan Kratochvil [Tue, 5 Jul 2016 08:47:18 +0000 (10:47 +0200)]
babeltrace compilation regression
Since:
commit
2d681be471cf8aff8f296cb7713c39e9aa4fc2bb
Author: Andreas Arnez <arnez@linux.vnet.ibm.com>
Date: Wed Apr 27 15:52:16 2016 +0200
Avoid non-C++-enabled babeltrace versions
tested with:
libbabeltrace-devel-1.2.4-4.fc24.x86_64
libbabeltrace-devel-1.4.0-2.fc25.x86_64
it can no longer build due to:
configure:16435: gcc -o conftest -m64 -g3 -pipe -Wall -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -fno-diagno
stics-show-caret -Werror -static-libstdc++ -static-libgcc conftest.c -ldl -ldl -lncurses -lm -ldl -lbabeltrace -lbabeltrace-ctf >&5
conftest.c: In function 'main':
conftest.c:208:7: error: 'pos' is a pointer; did you mean to use '->'?
gdb/ChangeLog
2016-07-05 Jan Kratochvil <jan.kratochvil@redhat.com>
* configure: Regenerate.
* configure.ac (HAVE_LIBBABELTRACE): Fix pos variable dereference.
GDB Administrator [Tue, 5 Jul 2016 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Mon, 4 Jul 2016 15:55:04 +0000 (08:55 -0700)]
Warn and return for duplicated plugin
If a plugin has been loaded already, we should warn and return, instead
of adding it on the plugin list.
PR ld/20321
* plugin.c (plugin_opt_plugin): Warn and return if plugin has
been loaded already.
* testsuite/ld-plugin/lto.exp: Run PR ld/20321 test.
* testsuite/ld-plugin/pr20321.c: New file.
Nick Clifton [Mon, 4 Jul 2016 14:44:10 +0000 (15:44 +0100)]
Allow the flash and ram memory region sizes to be specified in the default FT32 linker script.
* scripttempl/ft32.sc (__PMSIZE_): If not defined, set to 256K.
(__RAMSIZE): If not defined, set to 64K.
(MEMORY): Set the flash region size to __PMSIZE and the ram region
size to __RAMSIZE.
GDB Administrator [Mon, 4 Jul 2016 00:00:15 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sun, 3 Jul 2016 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in
Maciej W. Rozycki [Sat, 2 Jul 2016 22:39:18 +0000 (23:39 +0100)]
MIPS/GAS/testsuite: Remove remnants of a.out/ECOFF support
Complement:
commit
16e5e222b6eae6f110ea72bf627585c095a453a8
Author: Richard Sandiford <rdsandiford@googlemail.com>
Date: Sat Jun 22 16:57:42 2013 +0000
<https://sourceware.org/ml/binutils/2013-06/msg00195.html>, ("Make
gas/mips/mips.exp ELF-only"), and remove the remaining stale ECOFF test
dumps and pieces of a.out/ECOFF support in relocation match patterns.
gas/
* testsuite/gas/mips/ecoff@ld.d: Remove test.
* testsuite/gas/mips/ecoff@ld-forward.d: Remove test.
* testsuite/gas/mips/ecoff@ld-zero-3.d: Remove test.
* testsuite/gas/mips/ecoff@sd.d: Remove test.
* testsuite/gas/mips/ecoff@sd-forward.d: Remove test.
* testsuite/gas/mips/beq.d: Remove a.out and ECOFF support from
reloc patterns.
* testsuite/gas/mips/mipsr6@beq.d: Likewise.
* testsuite/gas/mips/bge.d: Likewise.
* testsuite/gas/mips/mipsr6@bge.d: Likewise.
* testsuite/gas/mips/bgeu.d: Likewise.
* testsuite/gas/mips/mipsr6@bgeu.d: Likewise.
* testsuite/gas/mips/blt.d: Likewise.
* testsuite/gas/mips/mipsr6@blt.d: Likewise.
* testsuite/gas/mips/bltu.d: Likewise.
* testsuite/gas/mips/mipsr6@bltu.d: Likewise.
* testsuite/gas/mips/branch-likely.d: Likewise.
* testsuite/gas/mips/la.d: Likewise.
* testsuite/gas/mips/lb.d: Likewise.
* testsuite/gas/mips/lifloat.d: Likewise.
* testsuite/gas/mips/sb.d: Likewise.
* testsuite/gas/mips/uld.d: Likewise.
* testsuite/gas/mips/ulh.d: Likewise.
* testsuite/gas/mips/ulw.d: Likewise.
* testsuite/gas/mips/usd.d: Likewise.
* testsuite/gas/mips/ush.d: Likewise.
* testsuite/gas/mips/usw.d: Likewise.
Maciej W. Rozycki [Sat, 2 Jul 2016 22:14:20 +0000 (23:14 +0100)]
MIPS/LD/testsuite: Resurrect `branch-misc-2' test
Revert:
commit
c9c1e416d7dd1a35bd7c1a96d034dca1d5071cd1
Author: Alexandre Oliva <aoliva@redhat.com>
Date: Thu Dec 12 04:39:44 2002 +0000
<https://sourceware.org/ml/binutils/2002-11/msg00657.html>, ("mips:
branches to external labels are broken"), complementing:
commit
bad36eacdad37042c4efb1c5fbf48476b47de82b
Author: Daniel Jacobowitz <drow@false.org>
Date: Wed Nov 23 14:04:18 2005 +0000
<https://sourceware.org/ml/binutils/2005-11/msg00324.html>,
("R_MIPS_PC16, again").
ld/
* testsuite/ld-mips-elf/branch-misc-2.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run it.
Maciej W. Rozycki [Sat, 2 Jul 2016 22:09:06 +0000 (23:09 +0100)]
MIPS/GAS/testsuite: Split `branch-misc-2' tests into two
Move `branch-misc-2' tests for non locally-defined-global symbols into
separate files. These tests have been introduced with:
commit
6f171daac941741e5fa904f6e462adb75a595495
Author: Alexandre Oliva <aoliva@redhat.com>
Date: Thu Dec 12 04:40:22 2002 +0000
<https://sourceware.org/ml/binutils/2002-11/msg00631.html>, ("mips:
branches to external labels are broken"), and:
commit
d17b874b6c14caa2f2ed1b5544a48de9f39a1a65
Author: Alexandre Oliva <aoliva@redhat.com>
Date: Wed Mar 12 23:07:22 2003 +0000
<https://sourceware.org/ml/binutils/2003-03/msg00136.html>, ("On
resolving the MIPS gas branch reloc issue"), while the test case served
a different purpose. With the original intent of the test case brought
back with:
commit
bad36eacdad37042c4efb1c5fbf48476b47de82b
Author: Daniel Jacobowitz <drow@false.org>
Date: Wed Nov 23 14:04:18 2005 +0000
<https://sourceware.org/ml/binutils/2005-11/msg00324.html>,
("R_MIPS_PC16, again"), these stand in the way for linker testing.
gas/
* testsuite/gas/mips/branch-misc-2.s: Move non
locally-defined-global symbol tests...
* testsuite/gas/mips/branch-misc-5.s: ... to this new test.
* testsuite/gas/mips/branch-misc-2.d: Update accordingly.
* testsuite/gas/mips/branch-misc-2-64.d: Likewise.
* testsuite/gas/mips/branch-misc-2pic.d: Likewise.
* testsuite/gas/mips/branch-misc-2pic-64.d: Likewise.
* testsuite/gas/mips/mipsr6@branch-misc-2-64.d: Likewise.
* testsuite/gas/mips/mipsr6@branch-misc-2pic-64.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-2.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-2-64.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-2pic.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-2pic-64.d: Likewise.
* testsuite/gas/mips/branch-misc-5.d: New test.
* testsuite/gas/mips/branch-misc-5pic.d: New test.
* testsuite/gas/mips/branch-misc-5-64.d: New test.
* testsuite/gas/mips/branch-misc-5pic-64.d: New test.
* testsuite/gas/mips/mipsr6@branch-misc-5-64.d: New test.
* testsuite/gas/mips/mipsr6@branch-misc-5pic-64.d: New test.
* testsuite/gas/mips/micromips@branch-misc-5.d: New test.
* testsuite/gas/mips/micromips@branch-misc-5pic.d: New test.
* testsuite/gas/mips/micromips@branch-misc-5-64.d: New test.
* testsuite/gas/mips/micromips@branch-misc-5pic-64.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
Maciej W. Rozycki [Sat, 2 Jul 2016 21:19:15 +0000 (22:19 +0100)]
MIPS/GAS/testsuite: Reenable disabled external BEQ tests
Complement:
commit
bad36eacdad37042c4efb1c5fbf48476b47de82b
Author: Daniel Jacobowitz <drow@false.org>
Date: Wed Nov 23 14:04:18 2005 +0000
<https://sourceware.org/ml/binutils/2005-11/msg00324.html>,
("R_MIPS_PC16, again"), and reenable external BEQ tests, the remaining
subset missed from the set of branch tests previously disabled with:
commit
6f171daac941741e5fa904f6e462adb75a595495
Author: Alexandre Oliva <aoliva@redhat.com>
Date: Thu Dec 12 04:40:22 2002 +0000
<https://sourceware.org/ml/binutils/2002-11/msg00631.html>, ("mips:
branches to external labels are broken").
gas/
* testsuite/gas/mips/beq.s: Uncomment branches to undefined
symbols.
* testsuite/gas/mips/beq.d: Update accordingly.
* testsuite/gas/mips/mipsr6@beq.d: Likewise.
* testsuite/gas/mips/micromips@beq.d: Likewise.
projects / binutils-gdb.git / log