ljsyscall: move installation path to /usr/share/lua/5x

Move ljsyscall install destination to /usr/share/lua/$(abiver}, to
match what the luarocks install would naturally do.  This also
reflects the value of INSTALL_LMOD in the luajit.pc file.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Tested-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fs/iso9660: fix iso9660 support

Similar to the "fs/initramfs: fix initramfs support" commit the same
problem applies to iso9660 in a different way. By adding iso9660 to
TARGETS it gets called before target-finalize with obvious consequences.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fs/initramfs: fix initramfs support

On commit a24877586a566e052897e50e6a0c2f53cfb029f TARGETS_ROOTFS was
introduced, however fs/initramfs/initramfs.mk was never updated, hence a
show-targets would be rootfs-initramfs with rootfs-cpio afterwards hence
never rebuilding the kernel with a proper cpio archive since TARGETS is
always before rootfs-* as stated in the commit description.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: fix musl external support on x86

On x86, the symbolic link ld-musl-<ARCH>.so.1 to libc.so must be
ld-musl-i386.so.1 in all cases, but $(ARCH) in Buildroot might be
i386, i486, i586, i686, etc. depending on the specific x86 variants
being selected.

This commit fixes that by creating a MUSL_ARCH variable set to i386 on
x86, and to $(ARCH) on other architectures.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

libmbim: bump to 1.8.0

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: remove dirs dependency

The "dirs" dependency is redundant because now the "generic-package"
infrastructure add automatically the "dirs" dependency so just remove
the redundant references.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: fix coding style

As stated in the Buildroot user manual add one space before and after
a = sign.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Makefile: remove BASE_TARGETS variable

Because now the toolchain dependency is automatically added by the
package infrastructure the BASE_TARGETS variable is useless so just
remove it.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

webkit: fix mmu reverse dependency moving it to %_ARCH_SUPPORTS

Because mmu dependency was not propagated move it to
BR2_PACKAGE_WEBKIT_ARCH_SUPPORTS to automatically propagate it.
It can ben moved to BR2_PACKAGE_WEBKIT_ARCH_SUPPORTS because like
target architecture dependencies it doesn't modify the comment string.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual: contributing: modify commit message template

This patch updates the commit message template provided in the manual.
The new template emphasizes the importance of providing a description of the
problem, the root cause, and the solution, and the fact that all this should
be wrapped at 72 characters.

Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual: contributing: minor rewording of 'reporting bugs' section

This patch makes some minor fixes in the section about reporting bugs.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual: contributing: don't recommend leaving out changelog from patches

Currently, the manual states that if you send a series and include a
changelog in the introduction mail (0 of x), it is not necessary to include
a changelog on the individual patches.
This is not always convenient: for large patch series it requires going back
to the introduction mail when opening each patch, to understand what
changed.
This patch rewords the paragraph accordingly.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual: contributing: minor rewording of 'submitting patches' section

This patch makes some minor changes to the section about submitting patches.
Content-wise there are little changes.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual: contributing: add section on TODO list

This patch adds a small section about working on items from the TODO list.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual: contributing: move section on patch reviews up and change intro

This patch moves the section about patch reviews and the
Tested-by/Reviewed-by/Acked-by tags upwards. Additionally, the first
paragraph is removed and replaced by another one. There are no other changes
in the text.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual: contributing: move and expand autobuild section

This patch moves the section about autobuild fixing up, and expands it with
more details about what autobuilds are, and how you can help with it.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-bad: add missing opencv ml module dependency

gst1-plugins-bad source code does include the old-style global opencv
header "opencv/cv.h", which includes headers from the core, imgproc,
video, features2d, flann, calib3d, objdetect and legacy modules.

However, the legacy module, in addition to headers from some of the
previously listed modules, also includes headers from the ml module.

Thus, the ml module must be selected to be able to build the legacy
one, so the gst-plugins-bad's opencv plugin.

Fixes:
  http://autobuild.buildroot.net/results/d02/d02e1843ef90f4b40c99e3b23eddf376f827d46e/

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libxmlrpc: disable parallel build

Although upstream tries to support parallel builds, there are several
dependencies that, if fixed, would end up making the library build
linearly, so in the end there would be no benefit to fix those.

Fixes:

  http://autobuild.buildroot.net/results/996/996fc95b302fb6dfc7cd9a468fd395226a36c6c4/

Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Alvaro G. M. <alvaro.gamez@hazent.com>
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libnspr: add support for AArch64

Signed-off-by: Alexander Khryukin <alexander@mezon.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain/wrapper: rename BR_DEBUG_WRAPPER

The user-facing variables should be prefixed with BR2_, not BR_.

Also quote the variable in the manual.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

host-python{, 3}: fix parallel install of libpython

During installation, host-python and host-python3 run the freshly built
python executable. This is done with a proper LD_LIBRARY_PATH to make
sure it picks up the libpython in the build directory. However, the
python binary has an RPATH pointing to the $(HOST_DIR)/usr/lib.
Therefore, if libpython exists there, it will be used instead.

If the install step is run in parallel, it is possible that libpython
is already partially copied to $(HOST_DIR)/usr/lib when python is run.
This gives an error like:

python: error while loading shared libraries: $(HOST_DIR)/usr/lib/libpython3.4m.so.1.0: file too short

The fix is simple: use RUNPATH instead of RPATH, which allows
LD_LIBRARY_PATH to override RUNPATH. That way, the libpython in the
build directory is always used. RUNPATH is enabled by passing
--enable-new-dtags to the linker.

Fixes e.g.
http://autobuild.buildroot.net/results/2a6/2a62de3247ba5ad273f03d01e690a3eeb11aa7b4

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual: contributing: add section on analyzing bug reports

This patch adds a small section to the manual promoting the reproduction,
analysis and fixing of bug reports.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual: contributing: expand introduction

This patch expands the introduction of the "Contributing to buildroot"
section. In general, the intention of this and subsequent patches is to
promote non-feature contributions, like autobuild fixes, bug report
analysis, TODO list work, etc.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imagemagick: bump to version 6.8.8-7

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: normalize separator size to 80

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support: fix typo in mkusers

This fixes the spurious "[: too many arguments" errors from mkusers.

Signed-off-by: Philip Paeps <philip@paeps.cx>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ntfs-3g: bump to version 2014.2.15

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

snmppp: bump to version 3.3.4

Changes snmp++v3.3.4:
- Fixed: Incorrect time values conversion in += and -= operators of the
  msec class in msec.cpp.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

kmod: disable --gc-sections ld option when building for xtensa

This is a workaround for the following ld issue exhibited by --gc-sections
option, until a proper fix for binutils is ready:

ld: BFD (GNU Binutils) 2.22 internal error, aborting at elf32-xtensa.c line 3374 in elf_xtensa_finish_dynamic_sections

Fixes:

  http://autobuild.buildroot.org/results/97d/97d4c96d6f6cdc1ed4007456f4ab70be9dfa41b5/

Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

samba4: move x86_64 answer cache file

The x86_64 answer cache file from commit
d191d40e3fd8cef7fbf3168fdc261de8d4b114fd was intended for a previous
draft version of the samba4 package that resided in a different
directory.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gnutls: security bump to version 3.2.12

Fixes CVE-2014-1959 / GNUTLS-SA-2014-1 and CVE-2014-0092 / GNUTLS-SA-2014.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libnftnl: exclude for CS PPC toolchains

The CS PPC 2011.3 and 2010.9 toolchains have a bad linux/socket.h header
that doesn't define sa_family_t which is used by linux/netlink.h (and
libnftnl).
Patching external toolchain headers wouldn't be too nice and they seem
to be the only CS toolchains affected.
It's definitely NOT a kernel header version issue, the toolchain is
based on 2.6.38 headers and vanilla 2.6.38 has the proper definitions in
place. Fixes:
http://autobuild.buildroot.net/results/1e2/1e2cac84f0faa9b8915a628260ef41765d86e174/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wpa_supplicant: add fix for WPS NFC support

WPS NFC support wouldn't build properly unless AP mode was enabled.
Add upstream fix to correct this and enable NFC support.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wpa_supplicant: fix static linking

wpa_supplicant doesn't use pkg-config and upstream likely wouldn't take
a patch to do so (hostapd/wpa_supplicant are used in android builds, and
it doesn't use any auto* stuff either) so pass it in LIBS* since we
always build openssl with libz support.

Made ugly by the fact that wpa_supplicant uses LIBS for the
wpa_supplicant binary, LIBS_c for the wpa_cli binary and LIBS_p for the
wpa_passphrase binary.

Also do f62a1d887aee642593b3f9507d6f3ebcd82219d0 here too since it
applies when libnl is used.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

hostapd: fix static linking

A rebase of Samuel Martin's http://patchwork.ozlabs.org/patch/312320/
hostapd doesn't use pkg-config and upstream likely wouldn't take a patch
to do so (hostapd/wpa_supplicant are used in android builds, and it
doesn't use any auto* stuff either) so pass it in LIBS since we
always build openssl with libz support.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

eudev: disable manpages

If host-libxslt or some libxslt is around (xsltproc) eudev will try to
build manpages with it. Problem is docbook DTDs might not be around and
things will break. We want no manpages anyway. Fixes:
http://autobuild.buildroot.net/results/c4e/c4e920b16c57e79df979f00cceaea7c0483f043c/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Revert "packages infra: add function to get a Kconfig option"

This reverts commit c28a28eed1943c1efb958448a87a2e8f0baf48d6. The
whole host-lzop optional dependency logic cannot work, since the
configuration file will only be known after the kernel sources are
extracted, if an internal kernel defconfig is used, which is quite
common.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Revert "linux: only depend on host-lzop if needed"

This reverts commit ca80782f4571f004c2b8cf2d0e60e83343beff34. The
whole host-lzop optional dependency logic cannot work, since the
configuration file will only be known after the kernel sources are
extracted, if an internal kernel defconfig is used, which is quite
common.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Revert "linux: check the configuration file exists"

This reverts commit b4cacbf5b15db06132b5f401d39b4c8d4e79158e. The
whole host-lzop optional dependency logic cannot work, since the
configuration file will only be known after the kernel sources are
extracted, if an internal kernel defconfig is used, which is quite
common.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Revert "linux: fix check of configuration file existence"

This reverts commit 477c28cf1d637b224b819dd278103a05fb6f9dbb. The
whole host-lzop optional dependency logic cannot work, since the
configuration file will only be known after the kernel sources are
extracted, if an internal kernel defconfig is used, which is quite
common.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Revert "linux: fix the KCONFIG_GET_OPT calls to be inside a BR2_LINUX_KERNEL test"

This reverts commit 4ad1ea59a59f951fad072dcb19429e6f468abf05. The
whole host-lzop optional dependency logic cannot work, since the
configuration file will only be known after the kernel sources are
extracted, if an internal kernel defconfig is used, which is quite
common.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Revert "i2c-tools: Add i2c-dev.h to staging directory for userspace i2c drivers."

This reverts commit ff673f9a22b1467878f1a117f2c6198e9683d5c7, as the
modified i2c-dev.h from i2c-tools has some definitions that conflict
with the i2c.h from the kernel headers. This means that a userspace
program or library that includes both will fail to build, as is the
case with libsoc.

Fixes:

  http://autobuild.buildroot.org/results/1f4/1f451a338487a2a3c8a8f9b18540d41b90ee5aac/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mysql: fix debugging options

The usual --{en,dis}able-debug passed by the infrastructure are not
recognised by mysql's ./configure, as it uses unusual options.

Also, debugging is only meaningful to the server, not the client.

Signed-off-by: Marcelo Gutierrez (UTN/FRH) <kuyurix@gmail.com>
[yann.morin.1998@free.fr: actually add the options, move in server if-block]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mysql: add option to build the server

Signed-off-by: Marcelo Gutierrez (UTN/FRH) <kuyurix@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luajit: handles BR2_PREFER_STATIC_LIB

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luajit: refactor without shared-lib.patch

the variable BUILDMODE does the job

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luajit: refactor without dont-strip.patch

the variable TARGET_STRIP does the job

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: fix the KCONFIG_GET_OPT calls to be inside a BR2_LINUX_KERNEL test

The KCONFIG_GET_OPT calls added by
ca80782f4571f004c2b8cf2d0e60e83343beff34 ('linux: only depend on
host-lzop if needed') are made even if the kernel package is not
selected. This hangs the linux.mk parsing as they try to read from a
file that doesn't exist.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libxmlrpc: new package

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: fix check of configuration file existence

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: check the configuration file exists

... and abort early, before we even use it.

Reported-by: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: only depend on host-lzop if needed

There is no reason to always depend on host-lzop, even when the kernel
compression is not LZO.

Since LZO is not the default compression option in the kernel (and there
is not sign that will change in the foreseeable future), it will always
appear in a config file, whether it is a complete config file or it is
only a defconfig.

So, only depend on host-lzop if the LZO compression is enabled in the
kernel config file (either the defconfig or the custom config file).
This includes:
  - kernel compression itself
  - initrd compression
  - initramfs compression

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

packages infra: add function to get a Kconfig option

We so far have no mean to get the value from a Kconfig option from the
.config file of a package (eg. linux, busybox...).

Add a new function that returns the unmangled value of an option.
It expect two arguments:
  - the Kconfig option name (complete, with leading CONFIG if necessary)
  - the .config file to get it from

Note that, if the Kconfig option is a string, the returned value will
contain the leading and trailing double-quotes.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

i2c-tools: Add i2c-dev.h to staging directory for userspace i2c drivers.

Signed-off-by: Jouko Nikula <jouko.nikula@espotel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

zlog: new package

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

website: new website !

A new menu and logo for the website, also some of the contents has been
reworked.

This patch also removes files that are no longer used, like the old
stylesheet and a few pages. The content of theses pages has mostly been
merged in other pages or was redudant with the manual.

[Thomas: integrate a few typo fixes noticed by Thomas De
Schampheleire]

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

website: add Buildroot javascript

Add some specific Javascript to display commit and mailing recent
entries. Note that the git commit mail are ignored. Also load Google
Analytics.

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

website: add Bootstrap and JQuery frameworks

Add Bootstrap framework, along with JQuery.

Theses files were downloaded from:
  - http://getbootstrap.com
  - http://jquery.com/

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs: Move README file to root

Move the README file from the subdirectory doc to the root.

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

glibc: needs MMU

Like eglibc, glibc is only available to MMU-based architectures.

Re-order select/depends to be in-line with eglibc, just above.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

samba4: fix readline support

Add automatic readline support since it's used when available.
Also add a patch to update to new-style typedefs that were removed from
readline 6.3 that causes build breakage. Fixes:
http://autobuild.buildroot.net/results/b13/b137c237ff6df81dd10f7895278d1f2f5d2326de/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wget: fix build against uclibc snapshot

Same fix as a728e2fe3 (coreutils: fix build against uclibc snapshot).

uClibc development version adds support for POSIX spawn routines. However,
unlike glibc these routines are in librt. This breaks gnulib autoconf
detection. Teach gnulib autoconf to look for POSIX spawn in librt.

Fixes:
http://autobuild.buildroot.net/results/bc20297dad0f0e9b7fa79fe835b9754fbce6dfdf/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Qt5: patches for linuxfb only systems

Merged patches from the official qtbase/stable branch,
not part of 5.2.1.

Signed-off-by: Peter Kümmel <syntheticpp@gmx.net>
Acked-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Qt5: update to 5.2.1

Removed patches are now part of the 5.2.1 release.

Signed-off-by: Peter Kümmel <syntheticpp@gmx.net>
Acked-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pkg-infra: DOWNLOAD is never called with two arguments

Currently, the DOWNLOAD helper accepts one or two arguments:
  - the source URI
  - the source filename; if missing, it is derived from the URI

But we have no caller of DOWNLOAD that passes a second argument.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/raspberrypi: bump kernel version

Bump from rpi-3.10.29 to rpi-3.10.32.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/rpi-firmware: bump version

Fixes and enhancements for:
  - audio: clock, HDMI passthrough, DTS
  - video playback: unpacked bitstreams
  - 3D: HW textures orientation
  - PWM: boot-time options
  - undisclosed changes

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/rpi-userland: bump version

Fixes memory leaks due to improper thrads handling.
Fixes to example code.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

systemd: fix license info

File is LICENSE.GPL2, not LICENSE.GPLV2, fixes:
http://autobuild.buildroot.net/results/e6c/e6c4dc22c014e62ce35273945a2a2307315ec3f7/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

hostapd: rework .config and bump to version 2.1

Rework .config file editing as was done for wpa_supplicant and bump to
version 2.1 which includes 802.11ac and ACS support.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wpa_supplicant: bump to version 2.1

Now with 802.11ac and P2P support.

CONFIG_LIBNL32 was a hidden option so switch to ENABLE/DISABLE now.
CONFIG_DRIVER_ATMEL was dropped.
CONFIG_DELAYED_MIC is no longer optional.
CONFIG_AP was also hidden so also switch to ENABLE/DISABLE.
CONFIG_EAP_* now blindly enabled instead of doing one per each.

P2P support is unified with the AP mode config knob since it's the more
likely scenario and share code between them.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wpa_supplicant: modify .config rework order

Switch to first enable and then disable.
Otherwise a wildcard enable can't have a single option disabled which is
far more usual than the opposite (and required for a simple bump to
version 2.1).

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dmraid: rename init script and use FOO_INSTALL_INIT_SYSV

This commit fixes the init script to use the correct
FOO_INSTALL_INIT_SYSV hook.

[Thomas: slightly reword commit log.]

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dmraid: bump version to 1.0.0.rc16-3

dmraid rc15 does not support later Intel Software RAID (isw) chipsets
correctly. Updating dmraid to a later edition fixes this issue.

Also cleanup and remove now useless patches.

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Antony Vennard <arv@vx9.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lvm2: enable cmdlib and dmeventd

In order to use a newer dmraid, the lvm2 package needs
to be compiled with --enable-cmdlib --enable-dmeventd, which
dmraid can then invoke on boot.

[Thomas: slightly reformat the list of configure options.]

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Antony Vennard <arv@vx9.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

samba4: add comment arch dependencies

Hide the comment for unsupported architectures.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual: clarify Tested-by/Reviewed-by/Acked-by tags

This patch updates the manual with more clarified descriptions of tags
Tested-by, Reviewed-by, and Acked-by, as discussed on the Buildroot
developer days in February 2014.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

systemd: add missing host-gperf dependency

Fixes:

  http://autobuild.buildroot.org/results/910/91010b43e63b82e050046b8f10c2c42f31a8a620/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

samba4: add cross answers for x86_64

Signed-off-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

samba4: new package

Samba 4.1.x uses the waf build system which isn't very cross-compile
friendly, and also some tests are formulated in a way that isn't
cross-build friendly either by needing to run them.

For this reason the samba4 build system includes a way to define
answers for many of the tests, but this support isn't complete
and some tests still want to be executed.

Samba 4.1.x also requires a proper answers file for each architecture,
and at the moment i've only tested for ARM and PowerPC so only those
architectures are supported to begin with. To add support for another
architecture basically copy one of the cache files to the proper name,
enable it in Config.in and adjust endianess and all of the "size of"
answers. I'm in the process of automating the sizeof and endianess
answers within the samba build system to make them cross friendly
to simplify the answers file to just one generic linux variant.
The 3.6.x branch is still security supported for the forseeable future.

I'm currently working with samba upstream to solve many of these
issues but this will probably happen with the yet unreleased
4.2 branch only.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

samba: update description and rename patches

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

heimdal: new package

host-heimdal is required for samba 4.1.x since it can't (yet) link
with an external heimdal implementation and can't cross-compile the
internal tools.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python: fixup python-config script

The original version uses sysconfig from the python interpreter
(normally host-python) which isn't really suited to provide information
of the target python.
Use the pure shell preprocessed backport from the upcoming python 3.4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: add SoCkit defconfig

This commit introduces initial support for the Arrow SoCkit
boards, featuring an Altera Cyclone V SoC:
http://www.altera.com/b/arrow-sockit.html

It is based on Roman Diouskine's work at
https://github.com/rndi/buildroot-alt.

The kernel and the u-boot used is the one developped by the
rocketboards.org community, as mainline support is not fully
available yet.

More info is available in the board/altera/sockit/readme.txt file.

[Thomas: remove a number of not really needed empty new lines in the
readme.txt file, update the defconfig for the new kernel headers
options.]

Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libdrm: bump to version 2.4.52

Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libdrm: Remove dependency towards X11

Using this defconfig

BR2_x86_pentium_mmx=y
BR2_ENABLE_DEBUG=y
BR2_OPTIMIZE_2=y
BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
# BR2_UCLIBC_INSTALL_UTILS is not set
BR2_BINUTILS_VERSION_2_23_2=y
BR2_GCC_VERSION_4_8_X=y
BR2_PACKAGE_LIBDRM=y
BR2_PACKAGE_LIBDRM_RADEON=y
BR2_PACKAGE_LIBDRM_NOUVEAU=y
BR2_PACKAGE_LIBDRM_VMWGFX=y

libdrm (w/o Intel API) compiles without BR2_PACKAGE_LIBATOMIC_OPS and without
BR2_PACKAGE_XLIB_LIBPCIACCESS, so USE_WCHAR, TOOLCHAIN_HAS_THREADS and
!BR2_PREFER_STATIC_LIB, previously added by the Xorg dependency, do not seem
to be necessary for libdrm at all.

Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
Signed-Off-By: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xlib_libpthread-stubs: Rename package to libpthread-stubs

Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
Signed-Off-By: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

flot: bump to version 0.8.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

jquery-keyboard: bump to version 1.18.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

jquery-ui-themes: bump to version 1.10.4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

jquery-ui: bump to version 1.10.4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

jquery: bump to version 1.11.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lftp: needs fork(), requires MMU support

Fixes:

  http://autobuild.buildroot.org/results/321/321a6eedd2c79ce45c047cd8ebddb67124da092c/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

parted: add readline bump fix patch

Fixes:
http://autobuild.buildroot.net/results/1e9/1e90929bfaf617381d490dc0b99f333968624ce7/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lvm2: add readline bump fix patch

Fixes:
http://autobuild.buildroot.net/results/d6f/d6f4d388c62ec2137560aabbff46c4a30c584e18/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5multimedia: install gsttools library to target

It is built when gst-plugins-base is selected.

Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Noticed-by: Paweł Gibaszek <gibol666@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ljlinenoise: new package

[Thomas: indicate that ljsyscall is a run-time dependency only.]

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luarocks: remove luainterpreter dependency

All packages using the luarocks infrastructure need a dependency on
luainterpreter, because having the Lua interpreter for the target is
needed to built native Lua modules. This dependency is already taken
care of in pkg-luarocks.mk.

However, host-luarocks, which is built as a dependency of the extract
step of any luarocks package, also had a dependency on
luainterpreter. Not only this was not necessary, but it was causing
problems with 'make legal-info'. Since 'make legal-info' triggers the
extraction of all packages, as soon as a luarocks package was enabled,
it would trigger the build of host-luarocks, itself triggering the
build of luainterpreter and therefore its dependencies, amongst which
the entire cross-compilation toolchain.

[Thomas: reword commit log to include more detailed explanations.]

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

bustle: use TARGET_MAKE_ENV instead of setting PATH in the make environment

TARGET_MAKE_ENV already contains the PATH definition among other useful
variables.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-pyasn: fix version number to match upstream tarball

The upstream tarball at
https://pypi.python.org/packages/source/p/pyasn1/ is actually in
version 0.1.7, not 0.17.

Reported-by: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>