Pedro Alves [Fri, 10 Feb 2023 11:32:35 +0000 (11:32 +0000)]
Fix "ptype INTERNAL_FUNC" (PR gdb/30105)
Currently, looking at the type of an internal function, like below,
hits an odd error:
(gdb) ptype $_isvoid
type = <internal function>type not handled in c_type_print_varspec_prefix()
That is an error thrown from
c-typeprint.c:c_type_print_varspec_prefix, where it reads:
...
case TYPE_CODE_DECFLOAT:
case TYPE_CODE_FIXED_POINT:
/* These types need no prefix. They are listed here so that
gcc -Wall will reveal any types that haven't been handled. */
break;
default:
error (_("type not handled in c_type_print_varspec_prefix()"));
break;
Internal function types have type code TYPE_CODE_INTERNAL_FUNCTION,
which is not explicitly handled by that switch.
That comment quoted above says that gcc -Wall will reveal any types
that haven't been handled, but that's not actually true, at least with
modern GCCs. You would need to enable -Wswitch-enum for that, which
we don't. If I do enable that warning, then I see that we're missing
handling for the following type codes:
TYPE_CODE_INTERNAL_FUNCTION,
TYPE_CODE_MODULE,
TYPE_CODE_NAMELIST,
TYPE_CODE_XMETHOD
TYPE_CODE_MODULE and TYPE_CODE_NAMELIST and Fortran-specific, so it'd
be a little weird to handle them here.
I tried to reach this code with TYPE_CODE_XMETHOD, but couldn't figure
out how to. ptype on an xmethod isn't treated specially, it just
complains that the method doesn't exist. I've extended the
gdb.python/py-xmethods.exp testcase to make sure of that.
My thinking is that whatever type code we add next, the most likely
scenario is that it won't need any special handling, so we'd just be
adding another case to that "do nothing" list. If we do need special
casing for whatever type code, I think that tests added at the same
time as the feature would uncover it anyhow. If we do miss adding the
special casing, then it still looks better to me to print the type
somewhat incompletely than to error out and make it harder for users
to debug whatever they need. So I think that the best thing to do
here is to just remove all those explicit "do nothing" cases, along
with the error default case.
After doing that, I decided to write a testcase that iterates over all
supported languages doing "ptype INTERNAL_FUNC". That revealed that
Pascal has a similar problem, except the default case hits a
gdb_assert instead of an error:
(gdb) with language pascal -- ptype $_isvoid
type =
../../src/gdb/p-typeprint.c:268: internal-error: type_print_varspec_prefix: unexpected type
A problem internal to GDB has been detected,
further debugging may prove unreliable.
That is fixed by this patch in the same way.
You'll notice that the new testcase special-cases the Ada expected
output:
} elseif {$lang == "ada"} {
gdb_test "ptype \$_isvoid" "<<internal function>>"
} else {
gdb_test "ptype \$_isvoid" "<internal function>"
}
That will be subject of the following patch.
Approved-By: Andrew Burgess <aburgess@redhat.com>
Change-Id: I81aec03523cceb338b5180a0b4c2e4ad26b4c4db
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30105
Simon Marchi [Tue, 14 Feb 2023 19:55:58 +0000 (14:55 -0500)]
gdb/dwarf2: split .debug_names reading code to own file
Move everything related to reading .debug_names from read.c to
read-debug-names.c. The only entry point exposed by
read-debug-names.{c,h} is dwarf2_read_debug_names.
Change-Id: I18b23f3c7a61b14abc3a46e4bf559bc2d078e8bc
Approved-By: Tom Tromey <tom@tromey.com>
Simon Marchi [Tue, 14 Feb 2023 19:55:57 +0000 (14:55 -0500)]
gdb/dwarf2: split .gdb_index reading code to own file
Move everything related to reading .gdb_index from read.c to
read-gdb-index.c. The only entry point exposed by read-gdb-index.{c,h}
is dwarf2_read_gdb_index.
Change-Id: I1e32c8f0720086538de8d2f612f27545377099bc
Approved-By: Tom Tromey <tom@tromey.com>
Simon Marchi [Tue, 14 Feb 2023 19:55:56 +0000 (14:55 -0500)]
gdb/dwarf2: move some things to read.h
The following 2 patches move .gdb_index and .debug_names reading code to
their own file. Prepare this by exposing some things used by that code
to read.h.
Change-Id: If8ef135758a2ff0ab3b765cc92596da8189f3bbd
Approved-By: Tom Tromey <tom@tromey.com>
Simon Marchi [Thu, 9 Feb 2023 18:54:26 +0000 (13:54 -0500)]
gdb: fix dealloc function not being called for frame 0
Tom de Vries reported [1] a regression in gdb.btrace/record_goto.exp
caused by
6d3717d4c4 ("gdb: call frame unwinders' dealloc_cache methods
through destroying the frame cache"). This issue is caught by ASan. On
a non-ASan build, it may or may not cause a crash or some other issue, I
haven't tried.
I managed to narrow it down to:
$ ./gdb -nx -q --data-directory=data-directory testsuite/outputs/gdb.btrace/record_goto/record_goto -ex "start" -ex "record btrace" -ex "next"
... and then doing repeatedly "record goto 19" and "record goto 27".
Eventually, I get:
(gdb) record goto 27
=================================================================
==
1527735==ERROR: AddressSanitizer: heap-use-after-free on address 0x6210003392a8 at pc 0x55e4c26eef86 bp 0x7ffd229f24e0 sp 0x7ffd229f24d8
READ of size 8 at 0x6210003392a8 thread T0
#0 0x55e4c26eef85 in bfcache_eq /home/simark/src/binutils-gdb/gdb/record-btrace.c:1639
#1 0x55e4c37cdeff in htab_find_slot_with_hash /home/simark/src/binutils-gdb/libiberty/hashtab.c:659
#2 0x55e4c37ce24a in htab_find_slot /home/simark/src/binutils-gdb/libiberty/hashtab.c:703
#3 0x55e4c26ef0c6 in bfcache_new /home/simark/src/binutils-gdb/gdb/record-btrace.c:1653
#4 0x55e4c26f1242 in record_btrace_frame_sniffer /home/simark/src/binutils-gdb/gdb/record-btrace.c:1820
#5 0x55e4c1b926a1 in frame_unwind_try_unwinder /home/simark/src/binutils-gdb/gdb/frame-unwind.c:136
#6 0x55e4c1b930d7 in frame_unwind_find_by_frame(frame_info_ptr, void**) /home/simark/src/binutils-gdb/gdb/frame-unwind.c:196
#7 0x55e4c1bb867f in get_frame_type(frame_info_ptr) /home/simark/src/binutils-gdb/gdb/frame.c:2925
#8 0x55e4c2ae6798 in print_frame_info(frame_print_options const&, frame_info_ptr, int, print_what, int, int) /home/simark/src/binutils-gdb/gdb/stack.c:1049
#9 0x55e4c2ade3e1 in print_stack_frame(frame_info_ptr, int, print_what, int) /home/simark/src/binutils-gdb/gdb/stack.c:367
#10 0x55e4c26fda03 in record_btrace_set_replay /home/simark/src/binutils-gdb/gdb/record-btrace.c:2779
#11 0x55e4c26fddc3 in record_btrace_target::goto_record(unsigned long) /home/simark/src/binutils-gdb/gdb/record-btrace.c:2843
#12 0x55e4c2de2bb2 in target_goto_record(unsigned long) /home/simark/src/binutils-gdb/gdb/target.c:4169
#13 0x55e4c275ed98 in record_goto(char const*) /home/simark/src/binutils-gdb/gdb/record.c:372
#14 0x55e4c275edba in cmd_record_goto /home/simark/src/binutils-gdb/gdb/record.c:383
0x6210003392a8 is located 424 bytes inside of 4064-byte region [0x621000339100,0x62100033a0e0)
freed by thread T0 here:
#0 0x7f6ca34a5b6f in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:123
#1 0x55e4c38a4c17 in rpl_free /home/simark/src/binutils-gdb/gnulib/import/free.c:44
#2 0x55e4c1bbd378 in xfree<void> /home/simark/src/binutils-gdb/gdb/../gdbsupport/gdb-xfree.h:37
#3 0x55e4c37d1b63 in call_freefun /home/simark/src/binutils-gdb/libiberty/obstack.c:103
#4 0x55e4c37d25a2 in _obstack_free /home/simark/src/binutils-gdb/libiberty/obstack.c:280
#5 0x55e4c1bad701 in reinit_frame_cache() /home/simark/src/binutils-gdb/gdb/frame.c:2112
#6 0x55e4c27705a3 in registers_changed_ptid(process_stratum_target*, ptid_t) /home/simark/src/binutils-gdb/gdb/regcache.c:564
#7 0x55e4c27708c7 in registers_changed_thread(thread_info*) /home/simark/src/binutils-gdb/gdb/regcache.c:573
#8 0x55e4c26fd922 in record_btrace_set_replay /home/simark/src/binutils-gdb/gdb/record-btrace.c:2772
#9 0x55e4c26fddc3 in record_btrace_target::goto_record(unsigned long) /home/simark/src/binutils-gdb/gdb/record-btrace.c:2843
#10 0x55e4c2de2bb2 in target_goto_record(unsigned long) /home/simark/src/binutils-gdb/gdb/target.c:4169
#11 0x55e4c275ed98 in record_goto(char const*) /home/simark/src/binutils-gdb/gdb/record.c:372
#12 0x55e4c275edba in cmd_record_goto /home/simark/src/binutils-gdb/gdb/record.c:383
previously allocated by thread T0 here:
#0 0x7f6ca34a5e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x55e4c0b55c60 in xmalloc /home/simark/src/binutils-gdb/gdb/alloc.c:57
#2 0x55e4c37d1a6d in call_chunkfun /home/simark/src/binutils-gdb/libiberty/obstack.c:94
#3 0x55e4c37d1c20 in _obstack_begin_worker /home/simark/src/binutils-gdb/libiberty/obstack.c:141
#4 0x55e4c37d1ed7 in _obstack_begin /home/simark/src/binutils-gdb/libiberty/obstack.c:164
#5 0x55e4c1bad728 in reinit_frame_cache() /home/simark/src/binutils-gdb/gdb/frame.c:2113
#6 0x55e4c27705a3 in registers_changed_ptid(process_stratum_target*, ptid_t) /home/simark/src/binutils-gdb/gdb/regcache.c:564
#7 0x55e4c27708c7 in registers_changed_thread(thread_info*) /home/simark/src/binutils-gdb/gdb/regcache.c:573
#8 0x55e4c26fd922 in record_btrace_set_replay /home/simark/src/binutils-gdb/gdb/record-btrace.c:2772
#9 0x55e4c26fddc3 in record_btrace_target::goto_record(unsigned long) /home/simark/src/binutils-gdb/gdb/record-btrace.c:2843
#10 0x55e4c2de2bb2 in target_goto_record(unsigned long) /home/simark/src/binutils-gdb/gdb/target.c:4169
#11 0x55e4c275ed98 in record_goto(char const*) /home/simark/src/binutils-gdb/gdb/record.c:372
#12 0x55e4c275edba in cmd_record_goto /home/simark/src/binutils-gdb/gdb/record.c:383
The problem is a stale entry in the bfcache hash table (in
record-btrace.c), left across a reinit_frame_cache. This entry points
to something that used to be allocated on the frame obstack, that has
since been wiped by reinit_frame_cache.
Before the aforementioned, unwinder deallocation functions were called
by iterating on the frame chain, starting with the sentinel frame, like
so:
/* Tear down all frame caches. */
for (frame_info *fi = sentinel_frame; fi != NULL; fi = fi->prev)
{
if (fi->prologue_cache && fi->unwind->dealloc_cache)
fi->unwind->dealloc_cache (fi, fi->prologue_cache);
if (fi->base_cache && fi->base->unwind->dealloc_cache)
fi->base->unwind->dealloc_cache (fi, fi->base_cache);
}
After that patch, we relied on the fact that all frames are (supposedly)
in the frame_stash. A deletion function was added to the frame_stash
hash table, so that dealloc functions would be called when emptying the
frame stash. There is one case, however, where a frame_info is not in
the frame stash. That is when we create the frame_info for the current
frame (level 0, unwound from the sentinel frame), but don't compute its
frame id. The computation of the frame id for that frame (and only that
frame, AFAIK) is done lazily. And putting a frame_info in the frame stash
requires knowing its id. So a frame 0 whose frame id is not computed
yet is necessarily not in the frame stash.
When replaying with btrace, record_btrace_frame_sniffer insert entries
corresponding to frames in the "bfcache" hash table. It then relies on
record_btrace_frame_dealloc_cache being called for each frame to remove
all those entries when the frames get invalidated. If a frame reinit
happens while frame 0's id is not computed (and therefore that frame is
not in frame_stash), record_btrace_frame_dealloc_cache does not get
called for it, and it leaves a stale entry in bfcache. That then leads
to a use-after-free when that entry is accessed later, which ASan
catches.
The proposed solution is to explicitly call frame_info_del on frame 0,
if it exists, and if its frame id is not computed. If its frame id is
computed, it is expected that it will be in the frame stash, so it will
be "deleted" through that.
[1] https://inbox.sourceware.org/gdb-patches/
20230130200249.131155-1-simon.marchi@efficios.com/T/#mcf1340ce2906a72ec7ed535ec0c97dba11c3d977
Reported-By: Tom de Vries <tdevries@suse.de>
Tested-By: Tom de Vries <tdevries@suse.de>
Change-Id: I2351882dd511f3bbc01e4152e9db13b69b3ba384
Tom Tromey [Wed, 8 Feb 2023 04:43:37 +0000 (21:43 -0700)]
Remove RETURNS from BFD chew comments
When reading the BFD manual, I noticed text like this:
-- Function: bool bfd_close (bfd *abfd);
Close a BFD. If the BFD was open for writing, then pending
operations are completed and the file written out and closed. If
...
*Returns*
'TRUE' is returned if all is ok, otherwise 'FALSE'.
The *Returns*, like the *Synopsis* in the earlier patch, is
un-info-like. It's also used inconsistently.
This patch removes all the uses of the RETURNS word and removes it
entirely from the chew scripts. Now this example reads:
-- Function: bool bfd_close (bfd *abfd);
Close a BFD. If the BFD was open for writing, then pending
operations are completed and the file written out and closed. If
...
'TRUE' is returned if all is ok, otherwise 'FALSE'.
In a few cases I had to slightly reword the comment. There were also
a couple of cases where there was redundant text. In these cases I
just dropped the RETURNS copy.
2023-02-07 Tom Tromey <tom@tromey.com>
* bfd.c, cache.c, compress.c, opncls.c: Remove RETURNS from
documentation comments.
* doc/doc.str, doc/proto.str (RETURNS): Remove.
Tom Tromey [Wed, 8 Feb 2023 04:40:53 +0000 (21:40 -0700)]
Use @deftypefn in chew output
When reading the BFD info manual, function definitions looked very
strange to me:
*Synopsis*
long bfd_get_mtime (bfd *abfd);
*Description*
Return the file modification time (as read from the file system, or from
the archive header for archive members).
The *Synopsis* and *Description* text in particular is very un-info-like.
To fix this, I tried removing the *Synopsis* text and having FUNCTION
use @deftypefn instead. However, this ended up requiring some new
state, because SYNOPSIS can appear without FUNCTION. This in turn
required "catstrif" (I considered adding FORTH-style if-else-then, but
in the end decided on an ad hoc approach).
After this the result looks like:
-- Function: long bfd_get_mtime (bfd *abfd);
Return the file modification time (as read from the file system, or
from the archive header for archive members).
This patch also reorders a few documentation comments to ensure that
SYNOPSIS comes before DESCRIPTION. This is the more common style and
is also now required by doc.str.
2023-02-07 Tom Tromey <tom@tromey.com>
* syms.c (bfd_decode_symclass, bfd_is_undefined_symclass)
(bfd_symbol_info): Reorder documentation comment.
* doc/doc.str (synopsis_seen): New variable.
(SYNOPSIS): Set synopsis_seen. Emit @deftypefn.
(DESCRIPTION): Use synopsis_seen.
* doc/chew.c (catstrif): New function.
(main): Add catstrif intrinsic.
(compile): Recognize "variable" command.
Tom Tromey [Tue, 7 Feb 2023 19:14:54 +0000 (12:14 -0700)]
Change internalmode to be an intrinsic variable
Currently, internalmode is a special word to set an internal state
variable. Because this series adds variables anyway, change this to
be a variable instead.
I saw some commits in the history that made sure that chew did not
leak memory, so I put some extra effort into trying to handle this for
variables as well.
2023-02-07 Tom Tromey <tom@tromey.com>
* doc/proto.str (external, internal, ifinternal, ENUMEQ, ENUMDOC):
Update.
* doc/chew.c (internalmode): Remove.
(add_intrinsic_variable): New function.
(main): Add internalmode as intrinsic.
(internal_mode): Remove global.
(maybecatstr): Update.
(free_words): Free variables.
Tom Tromey [Tue, 7 Feb 2023 19:03:37 +0000 (12:03 -0700)]
Use intptr_t rather than long in chew
To implement variables in chew, it's convenient to have a
pointer-sized integer on the stack. To this end, use intptr_t rather
than long.
2023-02-07 Tom Tromey <tom@tromey.com>
* doc/chew.c (pcu) <l>: Now intptr_t.
(internal_mode, istack, isp): Likewise.
(bang, atsign): Use intptr_t.
Tom Tromey [Tue, 7 Feb 2023 18:52:24 +0000 (11:52 -0700)]
Remove the paramstuff word
The chew "paramstuff" word has been a no-op since:
commit
c58b95236ce4c9345c4fa76e7ef16762e5229380
Author: Alan Modra <amodra@gmail.com>
Date: Sun Jun 29 10:06:40 2003 +0000
Convert to C90 and a few tweaks.
Remove it and its one use.
2023-02-07 Tom Tromey <tom@tromey.com>
* doc/proto.str (SYNOPSIS): Don't use paramstuff.
* doc/chew.c (paramstuff): Remove.
(main): Don't add paramstuff intrinsic.
Tom Tromey [Tue, 7 Feb 2023 18:39:16 +0000 (11:39 -0700)]
Add copyright headers to the .str files
The .str script files don't have copyright headers, but I think they
should. I used the same dates that chew.c uses, which I think makes
sense because these are inputs to chew.
2023-02-07 Tom Tromey <tom@tromey.com>
* doc/doc.str, doc/proto.str: Add copyright header.
Tom Tromey [Tue, 7 Feb 2023 18:34:56 +0000 (11:34 -0700)]
Simplify @node use in BFD documentation
The BFD docs currently specify all the parameters to @node. However,
this results in bad navigation in certain nodes -- the "space" command
in info doesn't know how to find the next node.
I think this style of @node is a leftover from ancient times.
Makeinfo can figure out the node structure on its own now, so simplify
everything to a single-argument @node.
2023-02-07 Tom Tromey <tom@tromey.com>
* doc/webassembly.texi (File layout): Remove second argument from
@node.
* doc/bfd.texi: Use single-argument @node everywhere.
Tom Tromey [Wed, 8 Feb 2023 04:15:51 +0000 (21:15 -0700)]
Remove H_CFLAGS from doc/local.mk
I couldn't see that H_CFLAGS is defined anywhere, so remove it.
2023-02-07 Tom Tromey <tom@tromey.com>
* Makefile.in: Rebuild.
* doc/local.mk (%D%/chew.stamp): Don't use H_CFLAGS.
Simon Marchi [Tue, 14 Feb 2023 19:23:27 +0000 (14:23 -0500)]
gdb: store internalvars in an std::map
In a test downstream in ROCgdb, we had a test case failing when
GDB_REVERSE_INIT_FUNCTIONS was set. The test was assuming a particular
order in the output of "show convenience". And the order changes when
running with GDB_REVERSE_INIT_FUNCTIONS.
I think that a nice way to fix it is to make the output of "show
convenience" sorted, and therefore stable. Ideally, I think that the
the user-visible behavior of GDB should not change when using
GDB_REVERSE_INIT_FUNCTIONS. Plus, it makes the output of "show
convenience" look nice, not that it's really important.
Implement this by storing the internal vars in an std::map, which is a
sorted container.
Change-Id: I1fca7e7877cc984a3a3432c7639d45e68d437241
Approved-By: Tom Tromey <tom@tromey.com>
Simon Marchi [Tue, 14 Feb 2023 19:23:26 +0000 (14:23 -0500)]
gdb: add constructor to internalvar
Add a constructor that takes the name as a parameter. Initialize the
next and kind fields inline.
Change-Id: Ic4db0aba85f1da9f12f3eee0ac62c0e5ef0cfe88
Approved-By: Tom Tromey <tom@tromey.com>
Simon Marchi [Tue, 14 Feb 2023 19:23:25 +0000 (14:23 -0500)]
gdb: use std::string for internalvar::name
Change internalvar::name to std::string, automating memory management.
It becomes necessary to allocate internalvar with new instead of XNEW.
I didn't find how to trigger the code in complete_internalvar. It is
called from condition_completer, so it should be by using the
"condition" command, but I never managed to get in the right code path.
Change-Id: I814d61361663e7becb8f3fb5f58c0180cdc414bc
Approved-By: Tom Tromey <tom@tromey.com>
Tom Tromey [Fri, 6 Jan 2023 16:30:40 +0000 (09:30 -0700)]
Do not record a rejected target description
When connecting to a certain target, gdb issues a warning about the
target description:
(gdb) target remote localhost:7947
Remote debugging using localhost:7947
warning: Architecture rejected target-supplied description
If you then kill the inferior and change the exec-file, this will
happen:
(gdb) file bar
Architecture of file not recognized.
After this, debugging doesn't work very well.
What happens here is that, despite the warning,
target_find_description records the downloaded description in the
target_desc_info. Then the "file" command ends up calling
set_gdbarch_from_file, which uses that description.
It seems to me that, because the architecture rejected the
description, it should not be used. That is what this patch
implements.
Pedro Alves [Mon, 13 Feb 2023 16:14:55 +0000 (16:14 +0000)]
gdb/manual: Move @findex entries
The manual currently has many cases like these:
@item $_gdb_setting_str (@var{setting})
@findex $_gdb_setting_str@r{, convenience function}
As suggested by Eli, move the @findex entries before @item so that the
index records the position of @item, and the Info reader places you
there when you use index-search.
I went over all @findex calls in the manual, and most are like the
above. Most either appear before @item, or before @subheading, like:
@subheading The @code{-break-after} Command
@findex -break-after
I fixed all of them.
There are findex entries in annotate.texinfo,python.texi, and
stabs.texinfo as well, though those all look right to me already.
Tested by typing "i _isvoid" (@item case) and "i -complete"
(@subheading case) in an Info reader, and checking where those took
me.
Change-Id: Idb6903b0bb39ff03f93524628dcef86b5585c97e
Suggested-By: Eli Zaretskii <eliz@gnu.org>
Alan Modra [Wed, 15 Feb 2023 10:50:47 +0000 (21:20 +1030)]
objdump read_section_stabs
This function is used to read sections other than stabs, and there is
now another version of it that extracts different info from the bfd
section. Rename it and return the bfd section instead of assorted
fields of the bfd section.
* objcopy.c (read_section): Renamed from read_section_stabs.
Delete size_ptr and entsize_ptr params, add contents param.
Return asection pointer. Don't unnecessarily free contents on
failure from bfd_malloc_and_get_section.
(find_stabs_section): Use read_section.
(dump_ctf, dump_section_sframe): Likewise.
(read_section_sframe): Delete.
Alan Modra [Wed, 15 Feb 2023 08:13:20 +0000 (18:43 +1030)]
objdump -G memory leak
* objdump.c (find_stabs_section): Free stabs.
Nick Clifton [Wed, 15 Feb 2023 09:26:10 +0000 (09:26 +0000)]
Fix the linker's merge4 test for the HPPA architecture.
PR 30078 * testsuite/ld-elf/merge4b.s: Use .asciz instead of .string in order to avoid the special behaviour of the .string directive on HPPA architectures.
Felix Willgerodt [Mon, 13 Feb 2023 10:02:23 +0000 (11:02 +0100)]
gdb, fortran: Fix quad floating-point type for ifort compiler.
I fixed this a while ago for ifx, one of the two Intel compilers, in
8d624a9d8050ca96e154215c7858ac5c2d8b0b19.
Apparently I missed that the older ifort Intel compiler actually emits
slightly different debug info again:
0x0000007a: DW_TAG_base_type
DW_AT_byte_size (0x20)
DW_AT_encoding (DW_ATE_complex_float)
DW_AT_name ("COMPLEX(16)")
0x00000081: DW_TAG_base_type
DW_AT_byte_size (0x10)
DW_AT_encoding (DW_ATE_float)
DW_AT_name ("REAL(16)")
This fixes two failures in gdb.fortran/complex.exp with ifort.
Approved-By: Tom Tromey <tom@tromey.com>
Jan Beulich [Wed, 15 Feb 2023 07:46:02 +0000 (08:46 +0100)]
gas: buffer_and_nest() needs to pass nul-terminated string to temp_ilp()
In
7545aa2dd2eb ("gas: improve interaction between read_a_source_file()
and s_linefile()") I didn't pay attention to the dual purpose of the
nul character previously used. This was to a fair degree because of the
open-coding of certain operations. Insert the earlier found line
terminator instead of a hard-coded newline, and do so early in this
special case (bypassing the later general insertion point). Plus
properly use sb_terminate() to mark the end of the string. (Note that
saved_eol_char was misnamed: Without calling sb_terminate() there's
simply random data at that position in the buffer.)
Alan Modra [Wed, 15 Feb 2023 05:58:07 +0000 (16:28 +1030)]
More ecoff sanity checks
Change FIX so that unused pointers that escape the UPDATE_RAW_END
sanity checks won't result in overflows. Also sanity check the local
sym fdr isymBase and csym values.
* ecoff.c (_bfd_ecoff_slurp_symbolic_info): Define FIX to set
pointers into swapped internal data to NULL if count is zero.
Sanity check local sym fdr_ptr->isymBase and fdr_ptr->csym.
Alan Modra [Tue, 14 Feb 2023 21:21:00 +0000 (07:51 +1030)]
binutils stabs type list
Fuzzers have found that specifying a large stab type number results in
lots of memory being requested, as the list is extended with a 16
element array at a time until we reach the given stab type. It also
takes a long time. Of course normal sane stab types use small
positive integers, but it's not hard to modify the code to handle type
numbers starting anyhere.
* stabs.c (struct stab_types): Add base_index.
(stab_find_slot): Simplify filenum check. Delete type number
check. Don't allocate entire array from 0 to type number,
allocate a sparse array.
GDB Administrator [Wed, 15 Feb 2023 00:00:24 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom Tromey [Sat, 28 Jan 2023 15:23:52 +0000 (08:23 -0700)]
Remove a use of pagination_enabled
I noticed that the TUI temporarily sets pagination_enabled and
gdb_stdout in one spot. However, I don't believe these settings are
necessary here, as a ui_file is passed to
gdbarch_print_registers_info. This patch removes these settings.
Simon Marchi [Mon, 13 Feb 2023 14:55:56 +0000 (09:55 -0500)]
gdb/dwarf2: rename some things, index -> gdb_index
This renaming helps make it clearer that these entites (classes,
functions) are specific to .gdb_index only, they are not shared with the
.debug_names handling.
Change-Id: I1a3cf3dbf450b62d1a0879d9aedd26397abdfd13
Approved-By: Tom Tromey <tom@tromey.com>
Simon Marchi [Mon, 13 Feb 2023 19:55:13 +0000 (14:55 -0500)]
gdb: cast return value of std::unique_ptr::release to void
My editor shows warnings like:
value.c:2784: warning: The value returned by this function should be used
value.c:2784: note: cast the expression to void to silence this warning [bugprone-unused-return-value]
These warnings come from clangd, so ultimately from one of the clang
static analyzers (probably clang-tidy).
Silence these warnings by casting to void. Add a comment to explain
why this unusual thing is done.
Change-Id: I58323959c0baf9f1b20a8d596e4c58dc77c6809a
Approved-By: Tom Tromey <tom@tromey.com>
Simon Marchi [Tue, 14 Feb 2023 16:37:16 +0000 (11:37 -0500)]
gdb: remove unnecessary tui directory check in configure
I suppose this was possible in the CVS days for the tui directory to be
missing, but it's not really possible nowaday. Well, a user could
delete the directory from their source tree but... it doesn't make
sense. Remove the check for that directory in configure.
Change-Id: Iea1412f5e5482ed003015030132ec22150c7d0b3
Approved-By: Tom Tromey <tom@tromey.com>
Tom Tromey [Tue, 14 Feb 2023 14:03:11 +0000 (07:03 -0700)]
Do not cast away const in agent_run_command
While investigating something else, I noticed some weird code in
agent_run_command (use of memcpy rather than strcpy). Then I noticed
that 'cmd' is used as both an in and out parameter, despite being
const.
Casting away const like this is bad. This patch removes the const and
fixes the memcpy. I also added a static assert to assure myself that
the code in gdbserver is correct -- gdbserver is passing its own
buffer directly to agent_run_command.
Reviewed-By: Andrew Burgess <aburgess@redhat.com>
Tom de Vries [Tue, 14 Feb 2023 12:15:49 +0000 (13:15 +0100)]
[gdb/testsuite] Add xfail in gdb.python/py-record-btrace.exp
There's a HW bug affecting Processor Trace on some Intel processors
(Ice Lake to Raptor Lake microarchitectures).
The bug was exposed by linux kernel commit
670638477aed
("perf/x86/intel/pt: Opportunistically use single range output mode"),
added in version v5.5.0, and was worked around by commit
ce0d998be927
("perf/x86/intel/pt: Fix sampling using single range output") in version
6.1.0.
The bug manifests (on a Performance-core of an i7-1250U, an Alder Lake cpu) in
a single test-case:
...
(gdb) python insn = r.instruction_history^M
warning: Decode error (-20) at instruction 33 (offset = 0x3d6a, \
pc = 0x400501): compressed return without call.^M
(gdb) FAIL: gdb.python/py-record-btrace.exp: prepare record: \
python insn = r.instruction_history
...
Add a corresponding XFAIL.
Note that the i7-1250U has both Performance-cores and Efficient-cores, and on
an Efficient-Core the test-case runs without any problems, so if the testsuite
run is not pinned to a specific cpu, the test may either PASS or XFAIL.
Tested on x86_64-linux:
- openSUSE Leap 15.4 with linux kernel version 5.14.21
- openSUSE Tumbleweed with linux kernel version 6.1.8
PR testsuite/30075
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30075
Nick Clifton [Tue, 14 Feb 2023 12:01:06 +0000 (12:01 +0000)]
Mention that the -plugin command line option is used to load plugins.
Tom de Vries [Tue, 14 Feb 2023 10:53:54 +0000 (11:53 +0100)]
[gdb/testsuite] Factor out proc linux_kernel_version
Factor out new proc linux_kernel_version from test-case
gdb.arch/i386-pkru.exp.
Tested on x86_64-linux.
Ulf Samuelsson [Tue, 14 Feb 2023 10:13:28 +0000 (10:13 +0000)]
ASCIZ Command for output section
Adds a new directive to the linker script syntax: ASCIZ.
This inserts a zero-terminated string into the output at the place where it is used.
Jan Beulich [Tue, 14 Feb 2023 07:35:02 +0000 (08:35 +0100)]
gas: correct symbol name comparison in .startof./.sizeof. handling
In
162c6aef1f3a ("gas: fold symbol table entries generated for
.startof.() / .sizeof.()") I screwed up quite badly, inverting the case
sensitive and case insensitive comparison functions.
Jan Beulich [Tue, 14 Feb 2023 07:34:42 +0000 (08:34 +0100)]
x86: {LD,ST}TILECFG use an extension opcode
It being zero and happening to work right now doesn't mean the insns
shouldn't be spelled out properly.
Jan Beulich [Tue, 14 Feb 2023 07:34:03 +0000 (08:34 +0100)]
gas: improve interaction between read_a_source_file() and s_linefile()
read_a_source_file() would bump line numbers only when seeing a newline,
whereas is_end_of_line[] indicates further end-of-line characters, in
particular the nul character. s_linefile() attempts to compensate for
the bump, but was too aggressive with this so far: It should only adjust
when a newline ends the line. To facilitate such a check, the check for
nothing else on the line needs to move ahead, which luckily is easily
possible: The relevant two conditions match, and the function can
simply return from the body of that earlier instance of the conditional.
The more strict treatment in s_linefile() then requires an adjustment
to buffer_and_nest()'s invocation of the function: The line terminator
now needs to be a newline, not nul.
Tom Tromey [Tue, 14 Feb 2023 07:28:47 +0000 (00:28 -0700)]
Fix build bug in ppc-linux-nat.c
The buildbot pointed out that my value refactoring series introduced a
bug in ppc-linux-nat.c:
../../binutils-gdb/gdb/ppc-linux-nat.c: In member function ‘int ppc_linux_nat_target::num_memory_accesses(const std::vector<gdb::ref_ptr<value, value_ref_policy> >&)’:
../../binutils-gdb/gdb/ppc-linux-nat.c:2458:44: error: expected unqualified-id before ‘->’ token
2458 | if (VALUE_LVAL (v) == not_lval || v->->deprecated_modifiable () == 0)
I don't know how that happened, but I am checking in this patch which
I think should fix it. It just removes the second "->".
I can't readily test this, so perhaps there's another bug lurking
after this one.
GDB Administrator [Tue, 14 Feb 2023 00:00:22 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom Tromey [Fri, 10 Feb 2023 17:48:50 +0000 (10:48 -0700)]
Rely on value_ref_ptr::operator->
Simon pointed out some spots were doing val.get()->mumble, where val
is a value_ref_ptr. These were introduced by the function-to-method
script, replacing older code that passed the result of .get() to a
function.
Now that value.h is using methods, we can instead rely on operator->.
This patch replaces all the newly-introduced instances of this.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Thu, 9 Feb 2023 13:55:48 +0000 (06:55 -0700)]
Remove deprecated_lval_hack
This removes deprecated_lval_hack and the VALUE_LVAL macro, replacing
all uses with a call to value::lval.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Thu, 9 Feb 2023 13:35:33 +0000 (06:35 -0700)]
Introduce set_lval method on value
This introduces the set_lval method on value, one step toward removing
deprecated_lval_hack. Ultimately I think the goal should be for some
of these set_* methods to be replaced with constructors; but I haven't
done this, as the series is already too long. Other 'deprecated'
methods can probably be handled the same way.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Wed, 1 Feb 2023 15:34:58 +0000 (08:34 -0700)]
Make ~value private
At the end of this series, I belatedly realized that values should
only be destroyed by value_decref. This patch marks the the
destructor private to enforce this.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Wed, 1 Feb 2023 15:25:40 +0000 (08:25 -0700)]
Make struct value data members private
This hoists the 'private' in struct value to also encompass the data
members.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Sun, 12 Feb 2023 15:04:07 +0000 (08:04 -0700)]
Turn record_latest_value into a method
record_latest_value now access some internals of struct value, so turn
it into a method.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Wed, 1 Feb 2023 15:25:21 +0000 (08:25 -0700)]
Add value::set_modifiable
This introduces a value::set_modifiable and changes a couple of spots
to use it.
I'm not completely sure the comments by deprecated_modifiable are
correct any more. Perhaps they should be removed and the method
renamed. Like so many before me, though, I've deferred investigation
of the issue.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Wed, 1 Feb 2023 14:27:50 +0000 (07:27 -0700)]
Turn various value copying-related functions into methods
This patch turns a grab bag of value functions to methods of value.
These are done together because their implementations are
interrelated.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Wed, 1 Feb 2023 04:11:38 +0000 (21:11 -0700)]
Turn preserve_one_value into method
This changes preserve_one_value to be a method of value. Much of this
patch was written by script.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Wed, 1 Feb 2023 03:59:39 +0000 (20:59 -0700)]
Turn some xmethod functions into methods
This turns value_from_xmethod, result_type_of_xmethod, and
call_xmethod to be methods of value. value_from_xmethod is a static
"constructor" now.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Wed, 1 Feb 2023 03:54:26 +0000 (20:54 -0700)]
Change some code to use value methods
A few functions in value.c were accessing the internal fields of
struct value. However, in these cases it seemed simpler to change
them to use the public API rather than convert them to be methods.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 23:26:38 +0000 (16:26 -0700)]
Turn set_value_component_location into method
This turns set_value_component_location into a method of value.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 23:23:22 +0000 (16:23 -0700)]
Turn value_non_lval and value_force_lval into methods
This changes value_non_lval and value_force_lval to be methods of
value.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 23:13:08 +0000 (16:13 -0700)]
Turn many optimized-out value functions into methods
This turns many functions that are related to optimized-out or
availability-checking to be methods of value. The static function
value_entirely_covered_by_range_vector is also converted to be a
private method.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 21:43:22 +0000 (14:43 -0700)]
Turn value_copy into a method
This turns value_copy into a method of value. Much of this was
written by script.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 21:51:24 +0000 (14:51 -0700)]
Fully qualify calls to copy in value.c
A coming patch will add value::copy, so this namespace-qualifies
existing calls to 'copy' in value.c, to ensure it will still compile
after that change is done.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 21:38:30 +0000 (14:38 -0700)]
Turn remaining value_contents functions into methods
This turns the remaining value_contents functions -- value_contents,
value_contents_all, value_contents_for_printing, and
value_contents_for_printing_const -- into methods of value. It also
converts the static functions require_not_optimized_out and
require_available to be private methods.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 21:25:29 +0000 (14:25 -0700)]
Turn value_incref and value_decref into methods
This changes value_incref and value_decref to be methods of value.
Much of this patch was written by script.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 21:22:13 +0000 (14:22 -0700)]
Move value_ref_policy methods out-of-line
This moves the value_ref_policy methods to be defined out-of-line.
This is a necessary step to change value_incref and value_decref to be
methods of value.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 21:17:50 +0000 (14:17 -0700)]
Turn value_bits_synthetic_pointer into a method
This changes value_bits_synthetic_pointer to be a method of value.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 21:11:48 +0000 (14:11 -0700)]
Turn value_contents_eq into a method
This changes value_contents_eq to be a method of value. It also
converts the static function value_contents_bits_eq into a private
method.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 20:59:56 +0000 (13:59 -0700)]
Turn allocate_value_contents into a method
This turns the static function allocate_value_contents into a method
on value. It is temporarily public, until some users are converted.
set_limited_array_length is converted as well.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 20:53:55 +0000 (13:53 -0700)]
Turn value_fetch_lazy into a method
This changes value_fetch_lazy to be a method of value. A few helper
functions are converted as well, to avoid problems in later patches
when the data members are all made private.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 20:45:40 +0000 (13:45 -0700)]
Turn some value_contents functions into methods
This turns value_contents_raw, value_contents_writeable, and
value_contents_all_raw into methods on value. The remaining functions
will be changed later in the series; they were a bit trickier and so I
didn't include them in this patch.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 20:41:35 +0000 (13:41 -0700)]
Turn value_zero into static "constructor"
This turns value_zero into a static "constructor" of value.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 20:30:54 +0000 (13:30 -0700)]
Turn allocate_optimized_out_value into static "constructor"
This turns allocate_optimized_out_value into a static "constructor" of
value.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 20:29:49 +0000 (13:29 -0700)]
Turn allocate_computed_value into static "constructor"
This turns allocate_computed_value into a static "constructor" of
value.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 20:25:17 +0000 (13:25 -0700)]
Turn allocate_value into a static "constructor"
This changes allocate_value to be a static "constructor" of value.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 20:24:00 +0000 (13:24 -0700)]
Turn allocate_value_lazy into a static "constructor"
This changes allocate_value_lazy to be a static "constructor" of
struct value.
I considered trying to change value to use ordinary new/delete, but it
seems to me that due to reference counting, we may someday want to
change these static constructors to return value_ref_ptr instead.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 19:46:20 +0000 (12:46 -0700)]
Turn more deprecated_* functions into methods
This changes deprecated_value_internalvar_hack,
deprecated_value_internalvar_hack, and deprecated_value_regnum_hack
into methods on value.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 19:27:30 +0000 (12:27 -0700)]
Turn value_address and set_value_address functions into methods
This changes the value_address and set_value_address functions to be
methods of value.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 19:22:01 +0000 (12:22 -0700)]
Turn value_initialized and set_value_initialized functions into methods
This changes the value_initialized and set_value_initialized functions
to be methods of value.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 19:16:29 +0000 (12:16 -0700)]
Convert value_lval_const and deprecated_lval_hack to methods
This converts the value_lval_const and deprecated_lval_hack functions
to be methods on value.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 19:12:39 +0000 (12:12 -0700)]
Turn value_computed_closure and value_computed_funcs functions into methods
This changes the value_computed_funcs and value_computed_closure
functions to be methods of value.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 18:11:17 +0000 (11:11 -0700)]
Turn value_stack and set_value_stack functions into methods
This changes the value_stack and set_value_stack functions to be
methods of value.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 17:52:04 +0000 (10:52 -0700)]
Turn value_lazy and set_value_lazy functions into methods
This changes the value_lazy and set_value_lazy functions to be methods
of value. Much of this patch was written by script.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 17:40:38 +0000 (10:40 -0700)]
Turn some value offset functions into method
This changes various offset-related functions to be methods of value.
Much of this patch was written by script.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 17:19:10 +0000 (10:19 -0700)]
Turn value_enclosing_type into method
This changes value_enclosing_type to be a method of value. Much of
this patch was written by script.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 17:17:10 +0000 (10:17 -0700)]
Turn deprecated_value_modifiable into method
This changes deprecated_value_modifiable to be a method of value.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 17:05:01 +0000 (10:05 -0700)]
Turn value_offset into method
This changes value_offset to be a method of value. Much of this patch
was written by script.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 16:56:33 +0000 (09:56 -0700)]
Turn value_parent into method
This changes value_parent to be a method of value. Much of this patch
was written by script.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 16:44:47 +0000 (09:44 -0700)]
Turn value_bitpos into method
This changes value_bitpos to be a method of value. Much of this patch
was written by script.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 16:38:22 +0000 (09:38 -0700)]
Turn value_bitsize into method
This changes value_bitsize to be a method of value. Much of this patch
was written by script.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 15:31:48 +0000 (08:31 -0700)]
Turn value_arch into method
This changes value_arch to be a method of value. Much of this patch
was written by script.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 15:24:35 +0000 (08:24 -0700)]
Turn deprecated_set_value_type into a method
This changes deprecated_set_value_type to be a method of value. Much
of this patch was written by script.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 14:52:09 +0000 (07:52 -0700)]
Turn value_type into method
This changes value_type to be a method of value. Much of this patch
was written by script.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 14:46:56 +0000 (07:46 -0700)]
Move struct value to value.h
This moves struct value to value.h. For now, all members remain
public, but this is a temporary state -- by the end of the series
we'll add 'private'.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 14:41:09 +0000 (07:41 -0700)]
Move ~value body out-of-line
struct value is going to move to value.h, but to avoid having
excessive code there, first move the destructor body out-of-line.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Tom Tromey [Tue, 31 Jan 2023 14:40:33 +0000 (07:40 -0700)]
Rename all fields of struct value
This renames all the fields of struct value, in preparation for the
coming changes.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Michael Matz [Mon, 13 Feb 2023 17:20:44 +0000 (18:20 +0100)]
PR30120: fix x87 fucomp misassembled
this fixes the entry for 'fucomp' to use the correct Reg value
(otherwise it's assembled as 'fucom').
Tom Tromey [Mon, 13 Feb 2023 17:16:05 +0000 (10:16 -0700)]
Remove unused imports from gdb's Python code
The "sys" import is unused in several Python files. This removes this
line from all the places where it is unnecessary.
Andrew Burgess [Thu, 12 Jan 2023 16:18:53 +0000 (16:18 +0000)]
gdb/tui: don't leak the known_window_types map
This commit finishes the task that was started in the previous
commit.
Now that all Python TUI window factories are correctly deleted when
the Python interpreter is shut down, we no longer need to dynamically
allocate the known_window_types map in tui-layout.c
This commit changes known_window_types to a statically allocated data
structure, removes the dynamic allocation from
initialize_known_windows, and then replaces lots of '->' with '.'
throughout this file.
There should be no user visible changes after this commit.
Reviewed-By: Tom Tromey <tom@tromey.com>
Andrew Burgess [Thu, 12 Jan 2023 15:47:17 +0000 (15:47 +0000)]
gdb/python: deallocate tui window factories at Python shut down
The previous commit relied on spotting when a Python defined TUI
window factory was deleted. I spotted that the window factories are
not deleted when GDB shuts down its Python environment, they are only
deleted when one window factory replaces another. Consider this
example Python script:
class TestWindowFactory:
def __init__(self, msg):
self.msg = msg
print("Entering TestWindowFactory.__init__: %s" % self.msg)
def __call__(self, tui_win):
print("Entering TestWindowFactory.__call__: %s" % self.msg)
return TestWindow(tui_win, self.msg)
def __del__(self):
print("Entering TestWindowFactory.__del__: %s" % self.msg)
gdb.register_window_type("test_window", TestWindowFactory("A"))
gdb.register_window_type("test_window", TestWindowFactory("B"))
And this GDB session:
(gdb) source tui.py
Entering TestWindowFactory.__init__: A
Entering TestWindowFactory.__init__: B
Entering TestWindowFactory.__del__: B
(gdb) quit
Notice that when the 'B' window replaces the 'A' window we see the 'A'
object being deleted. But, when Python is shut down (after the
'quit') the 'B' object is never deleted.
Instead, GDB retains a reference to the window factory object, which
forces the Python object to remain live even after the Python
interpreter itself has been shut down.
The references themselves are held in a dynamically allocated
std::unordered_map (in tui/tui-layout.c) which is never deallocated,
thus the underlying Python references are never decremented to zero,
and so GDB never tries to delete these Python objects.
This commit is the first half of the work to clean up this edge case.
All gdbpy_tui_window_maker objects (the objects that implement the
TUI window factory callback for Python defined TUI windows), are now
linked together into a global list using the intrusive list mechanism.
When GDB shuts down the Python interpreter we can now walk this global
list and release the reference that is held to the underlying Python
object. By releasing this reference the Python object will now be
deleted.
I've added a new assert in gdbpy_tui_window_maker::operator(), this
will catch the case where we somehow end up in here after having
reset the reference to the underlying Python object. I don't think
this should ever happen though as we only clear the references when
shutting down the Python interpreter, and the ::operator() function is
only called when trying to apply a new TUI layout - something that
shouldn't happen while GDB itself is shutting down.
This commit does not update the std::unordered_map in tui-layout.c,
that will be done in the next commit.
Reviewed-By: Tom Tromey <tom@tromey.com>
Andrew Burgess [Thu, 12 Jan 2023 15:47:11 +0000 (15:47 +0000)]
gdb/python: allow Python TUI windows to be replaced
The documentation for gdb.register_window_type says:
"... It's an error to try to replace one of the built-in windows,
but other window types can be replaced. ..."
I take this to mean that if I imported a Python script like this:
gdb.register_window_type('my_window', FactoryFunction)
Then GDB would have a new TUI window 'my_window', which could be
created by calling FactoryFunction(). If I then, in the same GDB
session imported a script which included:
gdb.register_window_type('my_window', UpdatedFactoryFunction)
Then GDB would replace the old 'my_window' factory with my new one,
GDB would now call UpdatedFactoryFunction().
This is pretty useful in practice, as it allows users to iterate on
their window implementation within a single GDB session.
However, right now, this is not how GDB operates. The second call to
register_window_type is basically ignored and the old window factory
is retained.
This is because in tui_register_window (tui/tui-layout.c) we use
std::unordered_map::emplace to insert the new factory function, and
emplace doesn't replace an existing element in an unordered_map.
In this commit, before the emplace call, I now search for an already
existing element, and delete any matching element from the map, the
emplace call will then add the new factory function.
Reviewed-By: Tom Tromey <tom@tromey.com>
Keith Seitz [Mon, 13 Feb 2023 14:14:40 +0000 (06:14 -0800)]
Fix doc build dependencies for --with-system-readline
PR build/30108 concerns building gdb documentation with
--with-sytem-readline. If the in-tree readline directory is
missing, though, the docs will fail to build:
make[4]: Entering directory '/home/keiths/work/readline-doc-issue/linux/gdb/doc'
make[4]: *** No rule to make target '../../../src/gdb/doc/../../readline/readline/doc/rluser.texi', needed by 'gdb.info'. Stop.
The listed file (and hsuser.texi) are conditionally included by gdb.texinfo.
When system readline is used, gdb/configure.ac will leave
READLINE_TEXI_INCFLAGS empty, causing doc/Makefile.in to output a line to
$BUILD/doc/GDBvn.texi with "@set SYSTEM_READLINE". This surpresses the
inclusion of the missing files. They are not needed or used in this
scenario.
However, GDB_DOC_SOURCE_INCLUDES always lists these two files as dependencies,
thus provoking the build error whenever readline/ is missing.
This patch fixes this by creating (essentially) a conditional setting of the
dependencies to be included from readline.
Michael Matz [Thu, 9 Feb 2023 14:29:00 +0000 (15:29 +0100)]
Fix PR30079: abort on mingw
the early-out in wild_sort is not enough, it might still be
that filenames are equal _and_ the wildcard list doesn't specify
a sort order either. Don't call compare_section then.
Tested on all targets.
Alan Modra [Mon, 13 Feb 2023 11:45:05 +0000 (22:15 +1030)]
_bfd_ecoff_slurp_symbol_table buffer overflow
Add missing bounds check, and tidy the existing bounds checking.
* ecoff.c (_bfd_ecoff_slurp_symbol_table): Break overlong lines.
Set bfd_error. Bounds check internal_sym.iss.
Andrew Burgess [Fri, 6 Jan 2023 16:42:23 +0000 (16:42 +0000)]
opcodes/mips: disassemble unknown micromips instructions as two shorts
Before commit:
commit
2438b771ee07be19d5b01ea55e077dd8b7cef445
Date: Wed Nov 2 15:53:43 2022 +0000
opcodes/mips: use .word/.short for undefined instructions
unknown 32-bit microMIPS instructions were disassembled as a raw
32-bit number with no '.word' directive. The above commit changed
this and added a '.word' directive before the 32-bit number.
It was pointed out on the mailing list, that for microMIPS it would be
better to display such 32-bit instructions using a '.short' directive
followed by two 16-bit values.
This commit updates the mips disassembler to do this, and adds a new
test that validates this output.
Andrew Burgess [Mon, 13 Feb 2023 11:19:57 +0000 (11:19 +0000)]
gdb/testsuite: handle differences in guile error string output
A new guile test added in commit:
commit
0a9ccb9dd79384f3ba3f8cd75940e8868f3b526f
Date: Mon Feb 6 13:04:16 2023 +0000
gdb: only allow one of thread or task on breakpoints or watchpoints
fails for some versions of guile. It turns out that some versions of
guile emit an error like this:
(gdb) guile (set-breakpoint-thread! bp 1)
ERROR: In procedure set-breakpoint-thread!:
In procedure gdbscm_set_breakpoint_thread_x: cannot set both task and thread attributes
Error while executing Scheme code.
while other versions of guile emit the error like this:
(gdb) guile (set-breakpoint-thread! bp 1)
ERROR: In procedure set-breakpoint-thread!:
ERROR: In procedure gdbscm_set_breakpoint_thread_x: cannot set both task and thread attributes
Error while executing Scheme code.
notice the extra 'ERROR: ' on the second line of output. This commit
updates the test regexp to handle this optional 'ERROR: ' string.
Alan Modra [Mon, 13 Feb 2023 09:58:41 +0000 (20:28 +1030)]
stabs.c static state
Move all the function local static state variables to file scope,
in order to tidy memory on exit and to reinit everything for that
annoying oss-fuzz. Also fix a couple memory leaks.
* read.h (read_begin, read_end): Declare.
* read.c (read_begin): Call stabs_begin.
(read_end): Call stabs_end.
* stabs.c (stabs_begin, stabs_end): New functions.
(in_dot_func_p): Delete, use current_function_label instead.
(cached_sec): Move from s_stab_generic.
(last_asm_file, file_label_count): Move from generate_asm_file.
(line_label_count, prev_lineno, prev_line_file): Move from
stabs_generate_asm_lineno.
(void_emitted_p): Move from stabs_generate_asm_func.
(endfunc_label_count): Move from stabs_generate_asm_endfunc.
(stabs_generate_asm_lineno): Simplify setting of
prev_line_file.
(stabs_generate_asm_func): Don't leak current_function_label.
(stabs_generate_asm_endfunc): Likewise.