orangepi_zero_defconfig: bump linux to 4.19.3, u-boot to 2018.11

4.18 brought cpufreq support for H3, but sunxi_defconfig does not enable the
ondemand cpufreq govenor so the frequency is dynamically adjusted - So
enable it in linux-extra.config.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

orangepi_pc_defconfig: bump linux to 4.19.3, u-boot to 2018.11

4.18 brought cpufreq support for H3, but sunxi_defconfig does not enable the
driver for the sy8106a regulator used on the board or enable the ondemand
cpufreq govenor so the frequency is dynamically adjusted - So enable these in
linux.fragment.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

wireguard: bump version to 0.0.20181119

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

util-linux: fix build for SPARC

Pull a patch already applied upstream that fixes the build of setarch
for SPARC processors.

Fixes:
  http://autobuild.buildroot.net/results/44d0538332499cea691a381048562a09cda23624
  http://autobuild.buildroot.net/results/e7e3469717ab27d66d2528087fd7c3a41477ae05

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board: macchiatobin: update readme.txt

Update the kernel and U-Boot versions to the actual versions in use.
Update the description of supported hardware features.

Add a note that the stale SPI flash environment issue only affects the
vendor BSP.

Cc: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/solidrun_macchiatobin_mainline: bump kernel and U-Boot

Bump U-Boot to version 2018.11. This version supports autodetection of
SD/eMMC boot source, so we can now enable environment load from SD card.
Add a U-Boot kconfig fragment that sets SD/eMMC as environment load/save
device. This avoids stale environment values from the SPI flash. That in
turn, allows to use the more convenient distro boot which is enabled in
the default environment.

Bump kernel to version 4.19.2. This version enables
CONFIG_PHY_MVEBU_CP110_COMPHY in the arm64 defconfig, so remove it from
the kernel kconfig fragment. Enable support for SFP modules detection
and configuration. Leave the PHY drivers for now to keep them built into
the kernel. The kernel defconfig builds these drivers as modules. But
that does not work as expected in the default configuration.

Cc: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to 4.19.2

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump to kernel version 4.19.2

[Peter: add hash]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain: add 4.19.x choice for headers

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-aiohttp: new package

Async http client/server framework (asyncio).

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libostree: bump to version 2018.9.1

Bump to v2018.9 added ostree-finalize-staged.path through
https://github.com/ostreedev/ostree/commit/ac1a919ffd4fe944d06c4f4510604baa73d1bf8e

However, this file was not added in the tarball until commit:
https://github.com/ostreedev/ostree/commit/62594765b2fae72e332ffb21fbd11085d911ef83

So use the new 2018.9.1 tarball to get this file otherwise build with
systemd will fail

Fixes:
 - http://autobuild.buildroot.org/results/fc6435282630e60927f88bf5954805ebbaa60cb3

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libostree: add systemd optional dependency

This option is available since v2018.3:
https://github.com/ostreedev/ostree/commit/17db0f15a79835b76ede6785120d237066c57d32

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

shadowsocks-libev: add connmarktos build option

Signed-off-by: DUPONCHEEL Sébastien <sebastien.duponcheel@corp.ovh.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

shadowsocks-libev: bump to version 3.2.1

Signed-off-by: DUPONCHEEL Sébastien <sebastien.duponcheel@corp.ovh.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-multidict: bump to verision 4.5.0

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/olimex_a20_olinuxino_lime*: add some sunxi packages

- sunxi mali mainline
- sunxi tools

like in olimex_a20_olinuxino_lime_legacy.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/glibc: update hash of LICENSES file for ARC version

In commit 5d4f23cbe65c79826b1b2071e972803a453934cb ("toolchain: Bump
ARC tools to arc-2018.09-rc1"), the glibc version for the ARC
architecture was bumped, but the hashes of the license files were not
updated accordingly, causing a build failure during "legal-info":

ERROR: LICENSES has wrong sha256 hash:
ERROR: expected: 61abdd6930c9c599062d89e916b3e7968783879b6be0ee1c6229dd6169def431
ERROR: got     : 35bdb41dc0bcb10702ddacbd51ec4c0fe6fb3129f734e8c85fc02e4d3eb0ce3f

The changes between the previous LICENSES file and the new one are:

 - The text related to libidn has been removed from the LICENSES file,
   following the switch to libidn2:

   https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=7f9f1ecb710eac4d65bb02785ddf288cac098323#patch2

 - The text related to stdio-common/tst-printf.c has been removed from
   the LICENSES file, following the removal of this non-free code from
   glibc:

   https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=5a357506659f9a00fcf5bc9c5d8fc676175c89a7#patch2

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tpm2-tss: depend on shared libraries

The code includes dlfcn.h even if --enable-static and --disable-shared
are passed to configure. There is an "#ifndef NO_DL ... #endif" wrapper
but NO_DL is never defined and adding "-DNO_DL" to CFLAGS causes other
compilation errors.

Fixes:
  http://autobuild.buildroot.net/results/cfc3bfef5e93329bf944a57947086d9ddc4fece3

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain: Bump ARC tools to arc-2018.09-rc2

This commit bumps ARC toolchain to arc-2018.09-rc2,
which includes significant changes since arc-2018.09-rc1.
We want to test how new toolchain-rc2 builds packages,
so we can make fixes before release of toolcain.
This makes us closer to toolchain release which will be in a few weeks.

Please note that it is a release candidate and it might
contain some breakages, please don't use it for production builds.

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

weston: drop libunwind optional dependency

libunwind was dropped since 3.0.91, see:
https://github.com/wayland-project/weston/commit/bb707dc0fe331c9af112a0552b7aa6fde755dd83

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/testing/test_rust: use standard defconfig fragment style

Since commit "2927f412be support/testing: standardize defconfig
fragments style" all other test cases use the same style for defconfig
fragments:
 - start after a backslash;
 - be declared as a multi-line string literal;
 - be indented one level more than the variable that contains it.

Do the same here for consistency.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/olimex_a20_olinuxino_lime*: bump Linux/U-Boot versions

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/olimex_imx233_olinuxino: bump kernel version

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

vmtouch: new package

Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

core/download: drop the SSH command

The ssh command was added back in 2011 with commit c61788f09 (GENTARGETS:
add support for scp://) and was used to check that the remote file
existed, back when we supported 'make source-check'.

However, in 2017, with commit bf28a165d (pkg-{download, generic}: remove
source-check), we actually removed support for source-check.

The SSH command however was not removed then, and stuck, even though
nothing ever uses it It is not even exported in the environment, and scp
does not use it either (it has -S to specify an ssh-compatible program).

Get rid of it.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libtirpc: bump to version 1.1.4

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

tpm2-tss: fix build without stack smashing protection (SSP)

Restore a configuration environment setup that was incorrectly removed
along with the upgrade to version 2.1.0.

Fixes:
  http://autobuild.buildroot.net/results/44221140fb8e2ddcb7d624e657b92a59375c02dd
  http://autobuild.buildroot.net/results/08b2a8a4bdd1c38703626a4fc37dab31dce98f49
  http://autobuild.buildroot.net/results/e469b47a6c8f1e8812325fd2860345105052316c
  http://autobuild.buildroot.net/results/f230fe6bbeb8b22d2b5b7cfb3f0ac4b3b936dc37
  http://autobuild.buildroot.net/results/ceb824033888086f6dde22c66d5b5f692a253c7e
  http://autobuild.buildroot.net/results/f863947a7384cb754706e6c346d222be59ad4136

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pkg-luarocks: drop flock at installation time

In commit 22b327fc743b48a33aec0a9190bd67118641b294 ("pkg-luarocks: fix
top-level parallel makefile support"), a flock on $(TARGET_DIR) was
added to ensure that two Luarocks packages are not installed at the
same time.

However, to support top-level parallel build, we have now clearly
decided that per-package folders is a requirement. Therefore,
TARGET_DIR is anyway going to be different for each package, making
this flock unnecessary.

Trying to use top-level parallel build without per-package folder is
simply not supported, so this commit drops the unnecessary flock.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Francois Perrad <francois.perrad@gadz.org>

keepalived: add libglib2 optional dependency

gio from libglib2 is used for dbus support

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

keepalive: add optional json-c dependency

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

keepalived: remove popt dependency

popt is not needed since version 1.3.1 and:
https://github.com/acassen/keepalived/commit/3452517c4f2b69badabf19fc06cc56db49d37603

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

jpeg-turbo: bump to version 2.0.1

Remove patch (already in version), see:
https://github.com/libjpeg-turbo/libjpeg-turbo/commit/950580eb0c020598a4c6c8aa46c86e31062e1ddc

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

msmtp: enable msmtpd if MMU is available

msmtpd uses fork so enable it if MMU is available

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

msmtp: bump to version 1.8.0

- Update site to https://marlam.de/msmtp/ (see
  https://sourceforge.net/projects/msmtp)
- Replace libidn by libidn2:
  https://github.com/marlam/msmtp-mirror/commit/0d8be2a35f0c7757d1f423e2d21f042626fec60e
- Disable msmtpd (minimal SMTP server) as it uses fork:
  https://github.com/marlam/msmtp-mirror/commit/e0bc975fbfb8b26a6dfaac87ebc64d3f37ef1e36

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

binutils: Get rid of obsolete patches

Some patches for Binutils seems to not be really needed.
Moreover for some of them I was not able to find any justification
for their introduction.

1. 0002-ld-makefile.patch

   This one I may track down to at least 2.15.92.0.2 here [1].
   Commit message just says: "Integrate some debian patches,
   extracted from binutils_2.15-4.diff"

   But in OpenEmbedded they got rid of it long ago on switch to 2.26, see [2].

2. 0003-check-ldrunpath-length.patch

   The same story here.

3. 0004-add-sysroot-fix-from-bug-3049.patch

   Bug mentioned in this patch was marked as "fixed" in 2012, see [3].

[1] https://git.buildroot.org/buildroot/commit/?id=ce2722a8f2abee5b60862bc896333b77a7502c82
[2] https://github.com/openembedded/openembedded-core/commit/3c7fe424f850af70989ad682dd9c5be70cd02ca5
[3]https://sourceware.org/bugzilla/show_bug.cgi?id=10340

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Romain Naour <romain.naour@smile.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/alsa-utils: bump to version to 1.1.7

Signed-off-by: Zenichi Amano <crow.misia@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/alsa-lib: bump to version to 1.1.7

Signed-off-by: Zenichi Amano <crow.misia@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain: Bump ARC tools to arc-2018.09-rc1

This commit bumps ARC toolchain to arc-2018.09-rc1.
We want to test how new toolchain-rc1 builds packages,
so we can make fixes before release of toolcain.

ARC GNU tools of version arc-2018.09-rc1 bring some quite significant changes like:
* Binutils v2.31.1 with additional ARC patches
* GCC 8.2.1 with additional ARC patches
* glibc 2.28 with additional ARC patches

Please note that it is a release candidate and it might contain some
breakages, please don't use it for production builds.

Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

websocketpp: new package

Signed-off-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Peter: fix alphabetical ordering as suggested by Ryan]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pulseview: bump version to 0.4.1

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libsigrokdecode: bump version to 0.5.2

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libsigrok: bump version to 0.5.1

Since commit 79034d4f39f7 ("strutil: Locale independent snprintf()
and vsnprintf() functions") libsigrok now needs to know locale_t.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

doxygen: bump version to 1.8.14

Patches are now upstream - remove both.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

memcached: bump to version 1.5.12

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sdl2: bump to version 2.0.9

Remove patch (already in version)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libpng: bump to 1.6.35

Also use https instead of http to retrieve the hashes.

Note that the only changes in the LICENSE file is the copy-right date and
the version number.

Signed-off-by: Nasser Afshin <afshin.nasser@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-setuptools: bump to version 40.6.2

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libuv: bump to version 1.24.0

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

paho-mqtt-c: bump to version 1.3.0

paho-mqtt-c 1.3.0 is the current stable version of paho-mqtt-c.

The patch 0001-Declare-mqtt-tests-as-a-C-only-project.patch is no longer
required, a similar fix was applied upstream with:
a87450ebcefed573ad4cdac77e2c893a3c314762.

Signed-off-by: Julien Grossholtz <julien.grossholtz@openest.io>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/pkg-luarocks: use <pkg>_EXTRACT_DEPENDENCIES

The host luarocks tool is needed when *extracting* luarocks
packages. Since regular dependencies are only available at the
configure step, it caused the "luarocks" program to be available too
late to be used to extract luarocks packages.

To work around this, host-luarocks was manually added as a dependency
of the extract step of luarocks packages. While this worked fine until
now, it breaks badly with per-package folders, because host-luarocks
is not recorded as an extract dependency of luarocks packages, and
therefore is not copied to the per-package host folder, causing a
failure.

In the mean time, the <pkg>_EXTRACT_DEPENDENCIES mechanism was added,
which aims at fixing exactly this problem, so let's use it and
simplify pkg-luarocks.mk.

Cc: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni &lt;<a href="mailto:thomas.petazzoni@bootlin.com" target="_blank">thomas.petazzoni@bootlin.com</a>&gt;<br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tpm2-tools: bump to version 3.1.3

- Drop C++ requirement, which came from tpm2-tss.
- Drop musl restriction.
- Drop the patch to build with LibreSSL, which is not required anymore.
- Update the patch for the "variable may be used uninitialized" error to
  match tpm2-tss 2.1.0, which defines TPM2_ALG_ERROR, not TPM_ALG_ERROR.

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tpm2-abrmd: bump to version 2.0.3

- Drop C++ requirement, which came from tpm2-tss.
- Drom musl restriction.
- Update daemon command-line options in init script.

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tpm2-tss: bump to version 2.1.0

- Drop C++ requirement (tmp2-tss is pure C now).
- Add explicit dependency on openssl (gnutls can be used too but this
  option will be added by a subsequent patch).
- Drop the patch on tcti_socket.cpp, which is not applicable.
- Add a patch already submitted upstream to support using libressl[1].
- Update LICENSE hash. The terms are is still BSD-2-Clause but the file
  now contains a SPDX license identifier.

1. https://github.com/tpm2-software/tpm2-tss/pull/1207

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libressl: bump to version 2.8.2

See release notes since 2.7.4 at

  https://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-2.8.0-relnotes.txt
  https://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-2.8.1-relnotes.txt
  https://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-2.8.2-relnotes.txt

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

eudev: bump to version 3.2.7

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iwd: new package

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

ell: bump version to 0.14

- remove superseeded patch 0001-ell-signal.h-use-standard-sigset_t-fixes-musl-compil.patch
- add patch for missing l_genl_family_set_unicast_handler symbol export

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/proftpd: add sendfile

Enables sendfile to ProFTPD for zero-copy transfers.

Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/proftpd: add enable buffer size

Enable buffer size as a compile time option to change internal
buffer size.

Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

.gitlab-ci.yml: add trigger per type of job

Currently the user has 2 sets of jobs that can be triggered on a GitLab
pipeline.
 - to trigger all defconfigs, all runtime tests and all check-* jobs:
   $ git tag <name>
   $ git push gitlab <name>                     # currently 260 jobs
 - to trigger only the check-* jobs:
   $ git push gitlab HEAD:<name>                # currently   4 jobs

This is not much versatile, so the user ends up hand-editing the
.gitlab-ci.yml in order to trigger some subsets, even the common ones,
for instance all runtime tests.

Add 2 more subsets that can be triggered based on the name of the
branch pushed.
 - to trigger all defconfigs and all check-* jobs:
   $ git push gitlab HEAD:<name>-defconfigs     # currently 192 jobs
 - to trigger all runtime tests and all check-* jobs:
   $ git push gitlab HEAD:<name>-runtime-tests  # currently  72 jobs

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

python-cchardet: new package

cChardet is high speed universal character encoding detector.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/acpid: add systemd service

This one is based on Archlinux's service file.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

nftables: bump to version 0.9.0

Switch to https download site to save a redirect.

Optionally depend on the jansson for the newly introduced JSON output
support.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libnftnl: bump to version 1.1.2

Update patch 0001.

Switch to https for download site to save a redirect.

Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/linux-tools: add support for pcitest tool

Add support for selection and compiling the pcitest tool on buildroot.

This tool is available to be compiled since kernel 4.20.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: add python-crossbar tests

This test invokes "crossbar version" command, that checks all
dependencies found in setup.py files and prints some system related
information.
Add haveged to the target to generate enough entropy so crossbar ->
pynacl -> libsodium don't hang waiting for /dev/random.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Ricardo: move test script to a separate file, remove Python 2 variant,
 add haveged to target to add entropy and avoid hanging]
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: use TestPythonPackageBase for python-txtorcon

Move the test script to be run on the target from inline in the test
case to a separate file.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: use TestPythonPackageBase for python-txaio

Move the test scripts to be run on the target from inline in the test
case to a separate file.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: use TestPythonPackageBase for python-twisted

Move the test script to be run on the target from inline in the test
case to a separate file.

Get the base defconfig fragment from the immediate parent class and not
directly from TestPythonBase because it is the correct way of doing
this. This way the base class TestPythonTwisted could even be placed in
a separate file.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: use TestPythonPackageBase for python-incremental

Move the test script to be run on the target from inline in the test
case to a separate file.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: use TestPythonPackageBase for python-cryptography

Move the test script to be run on the target from inline in the test
case to a separate file.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: use TestPythonPackageBase for python-autobahn

Move the test script to be run on the target from inline in the test
case to a separate file.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: create default test case for python packages

Test cases for python packages are very similar among each other: run a
simple script in the target that minimally tests the package.
So create a new helper class named TestPythonPackageBase that holds all
the logic to run a script on the target.

TestPythonPackageBase adds in build time one or more sample scripts to
be run on the target. The test case for the python package must
explicitly list them in the "sample_scripts" property. The test case
then automatically logins to the target, checks the scripts are really
in the rootfs (it calls "md5sum" instead of "ls" or "test" in an attempt
to make the logfile more friendly, since someone analysing a failure can
easily check the expected script was executed) and then calls the python
interpreter passing the sample script as parameter.
An optional property "timeout" exists for the case the sample script
needs more time to run than the default timeout from the test infra
(currently 5 seconds).

A simple test case for a package that only supports Python 2 will look
like this:

|from tests.package.test_python import TestPythonPackageBase
|
|
|class TestPythonPy2<Package>(TestPythonPackageBase):
|    __test__ = True
|    config = TestPythonPackageBase.config + \
|        """
|        BR2_PACKAGE_PYTHON=y
|        BR2_PACKAGE_PYTHON_<PACKAGE>=y
|        """
|    sample_scripts = ["tests/package/sample_python_<package>.py"]
|    timeout = 15

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-aiodns: new package

Simple DNS resolver for asyncio.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-pycares: new package

Python interface for c-ares.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libcurl: Don't need --without-(ssl/gnutls/nss/mbedtls) twice

Remove the --without-* options from the yes side of the TLS libraries
selection checks.

Since the --without-* option is now specified when the corresponding TLS
library is not being used, it's no longer necessary when enabling a TLS
library to explicity list all the other TLS libs that curl should not
use.

Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ipset: bump to version 7.0

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ethtool: bump to version 4.19

Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iucode-tool: rewrite init script

- Indent with tabs.
- Use a function for start.
- Pass "-q" to iucode_tool to inhibit usual output that would otherwise
  interfere with the operation status report.

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
[Peter: drop dummy function with sed invocation not compatible with busybox]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iucode-tool: bump to version 2.3.1

Brings several fixes and enhancements. Check the change log at

    https://gitlab.com/iucode-tool/iucode-tool/raw/v2.3.1/ChangeLog

Tested on an equipment with Intel C3000 processor.

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

intel-microcode: bump to version 20180807a

The big "intel-microcode.dat" text file is gone. Only binary files are
provided, in the "intel-ucode" directory. Install it at /lib/firmware/,
like linux-firmware does, and update the iucode-tool init script to use
that path.

We don't install the microcode under "intel-ucode-with-caveats", since
it needs special commits in the Linux kernel (see "relnotes" for more
information).

Tested on an equipment with Intel C3000 processor.

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: enable MICROCODE_INTEL if intel-microcode is selected

We already turn on kernel features for several packages, so let's do it
for intel-microcode too, otherwise it's impossible to load the microcode
(by means of iucode-tools).

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libcurl: Allow selection of TLS package libcurl will use

Instead of defaulting to OpenSSL, allow selection of package to use
through a choice in libcurl's config.  The default will be to select the
first enabled TLS provider in the same preference order as is used now,
i.e. no change from current behavior.

Some of the alternative libraries have advantages over OpenSSL in
certain areas.

For example, gnutls has vastly superior PKCS11 support.  One can use
client TLS private keys by supplying a PKCS11 URI instead of a private
key file name.  The TLS server cert trust store can be a PKCS11 URI,
e.g. configure libcurl with a ca-bundle of "pkcs11:model=p11-kit-trust".
Now server certs can be stored in a software and/or hardware HSM(s).
This doesn't work with OpenSSL.

However, some software only supports OpenSSL for TLS or other crypto
functions.  So it might be necessary to enable OpenSSL for that reason.

Signed-off-by: Trent Piepho <tpiepho@impinj.com>
[Peter: add BR2_PACKAGE_LIBCURL_TLS_SUPPORT and use it to hide choice &
comment, explitly pass --without-foo if option is not enabled,
only do .pc fixup if BR2_PACKAGE_LIBCURL_OPENSSL is enabled]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libmicrohttpd: bump to version 0.9.60

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libkrb5: bump to version 1.16.2

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

trace-cmd: bump to version 2.7

Add hash for license files

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

trace-cmd: fix site

Replace $(BR2_KERNEL_MIRROR) by https://git.kernel.org/pub, which
fixes the download of this package:

>>> trace-cmd trace-cmd-v2.6.1 Downloading
Initialized empty Git repository in /home/thomas/dl/trace-cmd/git/.git/
Fetching all references
fatal: repository 'https://cdn.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git/' not found
Detected a corrupted git cache.
Removing it and starting afresh.
Initialized empty Git repository in /home/thomas/dl/trace-cmd/git/.git/
Fetching all references
fatal: repository 'https://cdn.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git/' not found
Detected a corrupted git cache.
This is the second time in a row; bailing out
--2018-11-11 21:08:00--  http://sources.buildroot.net/trace-cmd/trace-cmd-trace-cmd-v2.6.1.tar.gz
Resolving sources.buildroot.net (sources.buildroot.net)... 104.25.210.19, 104.25.211.19, 2606:4700:20::6819:d313, ...
Connecting to sources.buildroot.net (sources.buildroot.net)|104.25.210.19|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1859835 (1.8M) [application/x-gtar-compressed]

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

util-linux: bump to version 2.33

- Update "basic set" help to include the new "choom" utility.
- Re-generate checksums for license files, whose names now follow the
  SPDX License List.
- Pull a patch already applied upstream that make rtcwake use poweroff
  if shutdown is not found (e.g. Busybox, which the default init system
  on Buldroot).
- Pull a patch already submitted upstream to fix the output of escaped
  characters by agetty.

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2018.11-rc1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: add additional resolved issues since 2018.08

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: add recent changes

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libmpdclient: bump to version 2.16

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mpd-mpc: bump to version 0.31

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mpd: bump to version 0.20.23

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/meson: bump to version 0.47.2

Note, that there is already a patch [1] to bump the version to 0.48.1.
However, the bump to version 0.48.x has some unresolved issues.

In the meantime, until the issue with 0.48 is resolved, bump to latest
version of the 0.47 branch.

[1] http://patchwork.ozlabs.org/patch/986260/

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

valgrind: disable for mips64r6/mips64elr6

Fixes [1]:

  /tmp/ccBAUqbI.s: Assembler messages:
  /tmp/ccBAUqbI.s:622: Error: opcode not supported on this processor: mips64r6 (mips64r6) `movn $2,$4,$7'
  /tmp/ccBAUqbI.s:2607: Error: opcode not supported on this processor: mips64r6 (mips64r6) `movn $2,$4,$7'

[1] http://autobuild.buildroot.net/results/dc52088222e9fbedcebffc1c39be6d2fecfffe5d

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-mwclient: bump version to 0.9.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libffi: bump to version 3.3-rc0

- Update site to github (for the time being, as 3.3-rc0 is a release
  candidate, it is not published on the official ftp)
- Update third patch
- Remove fourth and fifth patches (already in version)
- Remove uneeded hooks, as public headers are now installed in the
  standard path since
  https://github.com/libffi/libffi/commit/982b89c01aca99c7bc229914fc1521f96930919b
- New risc-v support:
  https://github.com/libffi/libffi/commit/3840d49aaa831d649b1597518a2903dfed0d57f3

Fixes:
 - http://autobuild.buildroot.org/results/3edf66362ea5a83291f19373e4b6f2e5cce98d7b

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sconeserver: bump version

https://github.com/sconemad/sconeserver/commit/6b932d7d8dbb700b830205e7111e469cefff490c
adds support for OpenSSL 1.1

Added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain/toolchain-buildroot: enable glibc for all little-endian ARCs with atomic ops

Initially we had a port only for ARCv2 cores but then with a simple
change ARCompact cores got supported as well.

So we generalize from BR2_archs to BR2_arcle as we haven't tried to
get glibc working on big-endian ARCs yet.

Also we never bothered to check avaialbility of atomic instructions in
the core but in case of Glibc for ARC this is really a must, so we add
this check here.

Note in case of uClibc we may have system w/o HW atomics but:

 1. Only single-core systems are allowed
 2. Atomic instructions are emulated via arc_usr_cmpxchg syscall

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>