[ARM] remove unused variable

gcc/Changelog

2015-11-12  Charles Baylis  <charles.baylis@linaro.org>

        * config/arm/neon.md: (neon_vld2_lane<mode>): Remove unused max
        variable.
        (neon_vst2_lane<mode>): Likewise.
        (neon_vld3_lane<mode>): Likewise.
        (neon_vst3_lane<mode>): Likewise.
        (neon_vld4_lane<mode>): Likewise.
        (neon_vst4_lane<mode>): Likewise.

From-SVN: r230203

decl.c (duplicate_decls): When combining typedefs, remove the new type from the variants list.

* decl.c (duplicate_decls): When combining typedefs, remove the
new type from the variants list.

From-SVN: r230202

pt.c (instantiate_class_template_1): Set function_depth around instantiation of lambda op().

* pt.c (instantiate_class_template_1): Set function_depth around
instantiation of lambda op().

From-SVN: r230201

Preserve the original program while using graphite.

Earlier, graphite used to translate portions of the original program after
scop-detection in order to represent the SCoP into polyhedral model.  This was
required because each basic block was represented as independent basic block in
the polyhedral model. So all the cross-basic-block dependencies were translated
out-of-ssa.

With this patch those dependencies are also exposed to the ISL, so there is no
need to modify the original structure of the program.

After this patch we should be able to enable graphite at some default
optimization level.

Highlights:
Remove cross bb scalar to array translation
For reductions, add support for more than just INT_CST
Early bailout on codegen.
Verify loop-closed ssa structure during copy of renames
The uses of exprs should come from bb which dominates the bb
Collect the init value of close phi in loop-guard
Do not follow vuses for close-phi, postpone loop-close phi until the
    corresponding loop-phi is processed
Bail out if no bb found to place cond/loop -phis
Move insertion of liveouts at the end of codegen
Insert loop-phis in the loop-header.

This patch passes regtest and bootstrap with BOOT_CFLAGS='-O2 -fgraphite-identity -floop-nest-optimize'

2015-11-11  Aditya Kumar  <aditya.k7@samsung.com>
      Sebastian Pop  <s.pop@samsung.com>

* graphite-isl-ast-to-gimple.c (class translate_isl_ast_to_gimple):
  New member codegen_error
(translate_isl_ast_for_loop): Remove call to single_succ_edge and early return.
(translate_isl_ast_node_user): Early return in case of error.
(translate_isl_ast_to_gimple::translate_isl_ast): Same.
(translate_isl_ast_to_gimple::translate_pending_phi_nodes): New.
(add_parameters_to_ivs_params): Remove macro.
(graphite_regenerate_ast_isl): Add if_region pointer to region.
* graphite-poly.c (new_poly_dr): Remove macro.
(print_pdr): Same.
(new_gimple_poly_bb): Same.
(free_gimple_poly_bb): Same.
(print_scop_params): Same.
* graphite-poly.h (struct poly_dr): Same.
(struct poly_bb): Add new_bb.
(gbb_from_bb): Remove dead code.
(pbb_from_bb): Same.
* graphite-scop-detection.c (parameter_index_in_region_1): Same.
(parameter_index_in_region): Same.
(find_scop_parameters): Same.
(build_cross_bb_scalars_def): New.
(build_cross_bb_scalars_use): New.
(graphite_find_cross_bb_scalar_vars): New
(try_generate_gimple_bb): Reads and Writes.
(build_alias_set): Move.
(gather_bbs::before_dom_children): Gather bbs visited.
(build_scops): call build_alias_set.
* graphite-sese-to-poly.c (phi_arg_in_outermost_loop): Delete.
(remove_simple_copy_phi): Delete.
(remove_invariant_phi): Delete.
(simple_copy_phi_p): Delete.
(reduction_phi_p): Delete.
(isl_id_for_dr): Remove unused param.
(parameter_index_in_region_1): Remove macro usage.
(set_scop_parameter_dim): Same.
(add_param_constraints): Same.
(add_conditions_to_constraints): Same
(build_scop_iteration_domain): Same.
(pdr_add_alias_set): Comment.
(add_scalar_version_numbers): New.
(build_poly_dr): ISL id.
(build_scop_drs): Move.
(build_poly_sr_1): Same.
(insert_stmts): Remove.
(build_poly_sr): New.
(new_pbb_from_pbb): Delete.
(insert_out_of_ssa_copy_on_edge): Delete.
(create_zero_dim_array): Delete.
(scalar_close_phi_node_p): Delete.
(propagate_expr_outside_region): Delete.
(rewrite_close_phi_out_of_ssa): Delete.
(rewrite_phi_out_of_ssa): Delete.
(rewrite_degenerate_phi): Delete.
(rewrite_reductions_out_of_ssa): Delete.
(rewrite_cross_bb_scalar_dependence): Delete.
(handle_scalar_deps_crossing_scop_limits):
(rewrite_cross_bb_scalar_deps): Delete.
(build_poly_scop): Remove calls to out-of-ssa functions.
* graphite.c (graphite_transform_loops): Early return in case of codegen error.
* sese.c (debug_rename_map_1): Delete.
(debug_rename_map): Delete.
(sese_record_loop): Remove macro.
(build_sese_loop_nests): Same.
(new_sese_info): Same.
(free_sese_info): Same.
(sese_insert_phis_for_liveouts):
(is_loop_closed_ssa_use): New.
(number_of_phi_nodes): New.
(bb_contains_loop_close_phi_nodes): New.
(bb_contains_loop_phi_nodes): New.
(phi_uses_name): New.
(is_valid_rename):
(get_rename): Add old_bb and loop_phi for more precise matching of
exprs.
(set_rename): Pass region.
(later_of_the_two): New.
(gsi_insert_earliest): New.
(collect_all_ssa_names): New.
(substitute_ssa_name): New.
(rename_all_uses): New.
(get_rename_from_scev): New.
(rename_uses): Pass old_bb for more precise matching of exprs.
(get_def_bb_for_const): New.
(get_new_name): New.
(get_loc): New.
(get_edges): New.
(copy_loop_phi_args): New.
(copy_loop_phi_nodes): New.
(get_loop_init_value): New.
(find_init_value): New.
(find_init_value_close_phi): New.
(copy_loop_close_phi_args): New.
(copy_loop_close_phi_nodes): New.
(add_phi_arg_for_new_expr): New.
(copy_cond_phi_args): New.
(copy_cond_phi_nodes): New.
(copy_phi_nodes): New.
(should_copy_to_new_region): New.
(set_rename_for_each_def): New.
(graphite_copy_stmts_from_block): Early return in case of error.
(copy_bb_and_scalar_dependences): Same.
* sese.h (vec_find): New.
(SESE_PARAMS): Delete.
(SESE_LOOPS): Delete.
(SESE_LOOP_NEST): Delete.
(sese_contains_loop): Remove macro usage.
(sese_nb_params): Same.
(struct gimple_poly_bb): Added read_scalar_refs, write_scalar_refs.

Co-Authored-By: Sebastian Pop <s.pop@samsung.com>
From-SVN: r230200

Daily bump.

From-SVN: r230199

* gcc.dg/pr65521.c: Fail on AIX.

From-SVN: r230195

improve construction of the original schedule

The patch builds the original schedule based on the now optimized scattering
dimension instead of building one based on the loop index only.

The implementation is simpler and catches more cases where the original schedule
and the transformed schedule are the same, such as the one below:

for (i = 0; i < 1000; i++)
{
  Temp = F[i];
  for (j = 0; j < 1000; j++)
 {
    D[j] = E[j]  * Temp;
    A[i][j] = A[i][j]  + B[i][j] * C[i][j] - D[j] ;
  }
  D[i] = E[i] * F[i];
}

  * graphite-sese-to-poly.c (build_scop_original_schedule): Call
  isl_union_map_add_map on every pbb->schedule.

From-SVN: r230191

add testsuite automatic dg-options and dg-do action for isl-ast-gen-* and fuse-* files

        * gcc.dg/graphite/fuse-1.c: Adjust pattern.  Remove dg-do.
        * gcc.dg/graphite/fuse-2.c: Same.
        * gcc.dg/graphite/graphite.exp (opt_files): Add fuse-*.c and
        isl-ast-gen-*.c files.
        * gcc.dg/graphite/isl-ast-gen-blocks-1.c: Remove dg-do and dg-options.
        * gcc.dg/graphite/isl-ast-gen-blocks-2.c: Same.
        * gcc.dg/graphite/isl-ast-gen-blocks-3.c: Same.
        * gcc.dg/graphite/isl-ast-gen-blocks-4.c: Same.
        * gcc.dg/graphite/isl-ast-gen-if-1.c: Same.
        * gcc.dg/graphite/isl-ast-gen-if-2.c: Same.
        * gcc.dg/graphite/isl-ast-gen-single-loop-1.c: Same.
        * gcc.dg/graphite/isl-ast-gen-single-loop-2.c: Same.
        * gcc.dg/graphite/isl-ast-gen-single-loop-3.c: Same.
        * gcc.dg/graphite/isl-ast-gen-user-1.c: Same.
        * gcc.dg/graphite/isl-codegen-loop-dumping.c: Remove.

From-SVN: r230190

Make create_parallel_loop return void

2015-11-11  Tom de Vries  <tom@codesourcery.com>

* tree-parloops.c (create_parallel_loop): Return void.

From-SVN: r230189

Insert new exit block only when needed in transform_to_exit_first_loop_alt

2015-11-11  Tom de Vries  <tom@codesourcery.com>

* tree-parloops.c (transform_to_exit_first_loop_alt): Insert new exit
block only when needed.

From-SVN: r230188

* libsupc++/new_handler.cc: Fix for explicit constructor change.

From-SVN: r230184

Loop in std::this_thread sleep functions

PR libstdc++/60421
* include/std/thread (this_thread::sleep_for): Retry on EINTR.
(this_thread::sleep_until): Retry if time not reached.
* src/c++11/thread.cc (__sleep_for): Retry on EINTR.
* testsuite/30_threads/this_thread/60421.cc: Test interruption and
non-steady clocks.

From-SVN: r230183

alpha-protos.h (print_operand): Remove.

* config/alpha/alpha-protos.h (print_operand): Remove.
(print_operand_address): Remove.
* config/alpha/alpha.h (PRINT_OPERAND): Remove.
(PRINT_OPERAND_ADDRESS): Remove.
(PRINT_OPERAND_PUNCT_VALID_P): Remove.
* config/alpha/alpha.c (TARGET_PRINT_OPERAND): New hook define.
(TARGET_PRINT_OPERAND_ADDRESS): New hook define.
(TARGET_PRINT_OPERAND_PUNCT_VALID_P): New hook define.
(print_operand_address): Rename to...
(alpha_print_operand_address): ...this and make static.
(print_operand): Rename to...
(alpha_print_operand): ...this and make static.
(alpha_print_operand_punct_valid_p): New static function.

From-SVN: r230181

Correct the Changelog date of the previous commit.

From-SVN: r230177

LWG 2510, make the default constructors of library tag types explicit.

2015-11-10  Ville Voutilainen  <ville.voutilainen@gmail.com>

LWG 2510, make the default constructors of library tag types
explicit.
* include/bits/mutex.h (defer_lock_t, try_lock_t,
adopt_lock_t): Add an explicit default constructor.
* include/bits/stl_pair.h (piecewise_construct_t): Likewise.
* include/bits/uses_allocator.h (allocator_arg_t): Likewise.
* libsupc++/new (nothrow_t): Likewise.
* testsuite/17_intro/tag_type_explicit_ctor.cc: New.

From-SVN: r230175

re PR c/68107 (Non-VLA type whose size is half or more of the address space constructed via a pointer)

PR c/68107
PR c++/68266
* c-common.c (valid_array_size_p): New function.
* c-common.h (valid_array_size_p): Declare.

* c-decl.c (grokdeclarator): Call valid_array_size_p.  Remove code
checking the size of an array.

* decl.c (grokdeclarator): Call valid_array_size_p.  Remove code
checking the size of an array.

* c-c++-common/pr68107.c: New test.
* g++.dg/init/new38.C (large_array_char): Adjust dg-error.
(large_array_char_template): Likewise.
* g++.dg/init/new44.C: Adjust dg-error.

From-SVN: r230174

tree-vectorizer.h (vect_slp_analyze_and_verify_instance_alignment): Declare.

2015-11-11  Richard Biener  <rguenther@suse.de>

* tree-vectorizer.h (vect_slp_analyze_and_verify_instance_alignment):
Declare.
(vect_analyze_data_refs_alignment): Make loop vect specific.
(vect_verify_datarefs_alignment): Likewise.
* tree-vect-data-refs.c (vect_slp_analyze_data_ref_dependences):
Add missing continue.
(vect_compute_data_ref_alignment): Export.
(vect_compute_data_refs_alignment): Merge into...
(vect_analyze_data_refs_alignment): ... this.
(verify_data_ref_alignment): Split out from ...
(vect_verify_datarefs_alignment): ... here.
(vect_slp_analyze_and_verify_node_alignment): New function.
(vect_slp_analyze_and_verify_instance_alignment): Likewise.
* tree-vect-slp.c (vect_supported_load_permutation_p): Remove
misplaced checks on alignment.
(vect_slp_analyze_bb_1): Add fatal output parameter.  Do
alignment analysis after SLP discovery and do it per instance.
(vect_slp_bb): When vect_slp_analyze_bb_1 fatally failed do not
bother to re-try using different vector sizes.

From-SVN: r230173

re PR bootstrap/68271 (Boostrap fails on x86_64-apple-darwin14 at r230084)

gcc/cp/ChangeLog
2015-11-11  Dominique d'Humieres <dominiq@lps.ens.fr>

PR bootstrap/68271
* parser.h (cp_token): Update pragma_kind to 8.

gcc/c-family/ChangeLog
2015-11-11  Dominique d'Humieres <dominiq@lps.ens.fr>

PR bootstrap/68271
* c-pragma.c (c_register_pragma_1): Update the gcc_assert to 256.

From-SVN: r230172

count-headers: Initial file.

2015-11-11  Andrew MacLeod  <amacleod@redhat.com>

* count-headers: Initial file.
* gcc-order-headers: Initial file.
* graph-header-logs: Initial file.
* graph-include-web: Initial file.
* headerutils.py: Initial file.
* included-by: Initial file.
* README: Initial file.
* reduce-headers: Initial file.
* replace-header: Initial file.
* show-headers: Initial file.

From-SVN: r230171

re PR target/67265 ([x86] 'asm' operand has impossible constraints with -fstack-check)

PR target/67265
* config/i386/i386.c (ix86_finalize_stack_realign_flags): Likewise.

From-SVN: r230170

gimplify.c (enum omp_region_type): Add ORT_ACC, ORT_ACC_DATA, ORT_ACC_PARALLEL, ORT_ACC_KERNELS.

gcc/
* gcc/gimplify.c (enum  omp_region_type): Add ORT_ACC,
ORT_ACC_DATA, ORT_ACC_PARALLEL, ORT_ACC_KERNELS.  Adjust ORT_NONE.
(gimple_add_tmp_var): Add ORT_ACC checks.
(gimplify_var_or_parm_decl): Likewise.
(omp_firstprivatize_variable): Likewise. Use ORT_TARGET_DATA as a
mask.
(omp_add_variable): Look in outer contexts for openacc and allow
reductions with other sharing. Add ORT_ACC and ORT_TARGET_DATA
checks.
(omp_notice_variable, omp_is_private, omp_check_private): Add
ORT_ACC checks.
(gimplify_scan_omp_clauses: Treat ORT_ACC as ORT_WORKSHARE.
Permit private openacc reductions.
(gimplify_oacc_cache): Specify ORT_ACC.
(gimplify_omp_workshare): Adjust OpenACC region types.
(gimplify_omp_target_update): Likewise.
* gcc/omp-low.c (scan_sharing_clauses): Remove Openacc
firstprivate sorry.
(lower-rec_input_clauses): Don't handle openacc firstprivate
references here.
(lower_omp_target): Emit initializers for openacc firstprivate vars.

gcc/testsuite/
* gfortran.dg/goacc/private-3.f95: Remove xfail.
* gfortran.dg/goacc/combined_loop.f90: Remove xfail.

libgomp/
* testsuite/libgomp.oacc-c-c++-common/loop-red-v-2.c: Remove xfail.
* testsuite/libgomp.oacc-c-c++-common/loop-red-w-2.c: Remove xfail.
* testsuite/libgomp.oacc-c-c++-common/firstprivate-1.c: New.
* testsuite/libgomp.oacc-c-c++-common/firstprivate-2.c: New.

Co-Authored-By: Cesar Philippidis <cesar@codesourcery.com>
From-SVN: r230169

re PR target/67265 ([x86] 'asm' operand has impossible constraints with -fstack-check)

PR target/67265
* ira.c (ira_setup_eliminable_regset): Do not necessarily create the
frame pointer for stack checking if non-call exceptions aren't used.
* config/i386/i386.c (ix86_finalize_stack_realign_flags): Likewise.

From-SVN: r230168

rs6000: Extend 20050603-3.c testcase to 64-bit

The testcase used to fail on 64-bit, but it was disabled there.
This patch makes it run there, and beefs up the checking of the
generated code a bit.

gcc/testsuite/
* gcc.target/powerpc/20050603-3.c: Don't restrict to ilp32.  Do more
tests for the expected generated code.

From-SVN: r230167

decl.c: Remove unused header files.

ada

* gcc-interface/decl.c: Remove unused header files.
* gcc-interface/misc.c: Likewise.
* gcc-interface/targtyps.c: Likewise.
* gcc-interface/trans.c: Likewise.
* gcc-interface/utils.c: Likewise.
c

* c-array-notation.c: Remove unused header files.
* c-aux-info.c: Likewise.
* c-convert.c: Likewise.
* c-decl.c: Likewise.
* c-errors.c: Likewise.
* c-lang.c: Likewise.
* c-objc-common.c: Likewise.
* c-parser.c: Likewise.
* c-typeck.c: Likewise.
* gccspec.c: Likewise.

c-family

* array-notation-common.c: Remove unused header files.
* c-ada-spec.c: Likewise.
* c-cilkplus.c: Likewise.
* c-common.c: Likewise.
* c-cppbuiltin.c: Likewise.
* c-dump.c: Likewise.
* c-format.c: Likewise.
* c-gimplify.c: Likewise.
* c-indentation.c: Likewise.
* c-lex.c: Likewise.
* c-omp.c: Likewise.
* c-opts.c: Likewise.
* c-pch.c: Likewise.
* c-ppoutput.c: Likewise.
* c-pragma.c: Likewise.
* c-pretty-print.c: Likewise.
* c-semantics.c: Likewise.
* c-ubsan.c: Likewise.
* cilk.c: Likewise.
* stub-objc.c: Likewise.

cp

* call.c: Remove unused header files.
* class.c: Likewise.
* constexpr.c: Likewise.
* cp-array-notation.c: Likewise.
* cp-cilkplus.c: Likewise.
* cp-gimplify.c: Likewise.
* cp-lang.c: Likewise.
* cp-objcp-common.c: Likewise.
* cp-ubsan.c: Likewise.
* cvt.c: Likewise.
* cxx-pretty-print.c: Likewise.
* decl.c: Likewise.
* decl2.c: Likewise.
* dump.c: Likewise.
* error.c: Likewise.
* except.c: Likewise.
* expr.c: Likewise.
* friend.c: Likewise.
* g++spec.c: Likewise.
* init.c: Likewise.
* lambda.c: Likewise.
* lex.c: Likewise.
* mangle.c: Likewise.
* method.c: Likewise.
* name-lookup.c: Likewise.
* optimize.c: Likewise.
* parser.c: Likewise.
* pt.c: Likewise.
* ptree.c: Likewise.
* repo.c: Likewise.
* rtti.c: Likewise.
* search.c: Likewise.
* semantics.c: Likewise.
* tree.c: Likewise.
* typeck.c: Likewise.
* typeck2.c: Likewise.
* vtable-class-hierarchy.c: Likewise.

Fortran

* array.c: Remove unused header files.
* convert.c: Likewise.
* cpp.c: Likewise.
* decl.c: Likewise.
* f95-lang.c: Likewise.
* frontend-passes.c: Likewise.
* iresolve.c: Likewise.
* match.c: Likewise.
* module.c: Likewise.
* options.c: Likewise.
* parse.c: Likewise.
* target-memory.c: Likewise.
* trans-array.c: Likewise.
* trans-common.c: Likewise.
* trans-const.c: Likewise.
* trans-decl.c: Likewise.
* trans-expr.c: Likewise.
* trans-intrinsic.c: Likewise.
* trans-io.c: Likewise.
* trans-openmp.c: Likewise.
* trans-stmt.c: Likewise.
* trans-types.c: Likewise.
* trans.c: Likewise.

go

* go-backend.c: Remove unused header files.
* go-gcc.cc: Likewise.
* go-lang.c: Likewise.
* gospec.c: Likewise.

Java

* boehm.c: Remove unused header files.
* builtins.c: Likewise.
* class.c: Likewise.
* constants.c: Likewise.
* decl.c: Likewise.
* except.c: Likewise.
* expr.c: Likewise.
* java-gimplify.c: Likewise.
* jcf-dump.c: Likewise.
* jcf-io.c: Likewise.
* jcf-parse.c: Likewise.
* jvgenmain.c: Likewise.
* lang.c: Likewise.
* mangle.c: Likewise.
* mangle_name.c: Likewise.
* resource.c: Likewise.
* typeck.c: Likewise.
* verify-glue.c: Likewise.
* verify-impl.c: Likewise.
* zextract.c: Likewise.

jit

* dummy-frontend.c: Remove unused header files.
* jit-builtins.c: Likewise.
* jit-playback.c: Likewise.
* jit-recording.c: Likewise.
* jit-spec.c: Likewise.
* libgccjit.c: Likewise.

lto

* lto-lang.c: Remove unused header files.
* lto-object.c: Likewise.
* lto-partition.c: Likewise.
* lto-symtab.c: Likewise.
* lto.c: Likewise.

objc

* objc-act.c: Remove unused header files.
* objc-encoding.c: Likewise.
* objc-gnu-runtime-abi-01.c: Likewise.
* objc-lang.c: Likewise.
* objc-map.c: Likewise.
* objc-next-runtime-abi-01.c: Likewise.
* objc-next-runtime-abi-02.c: Likewise.
* objc-runtime-shared-support.c: Likewise.

objcp

* objcp-decl.c: Remove unused header files.
* objcp-lang.c: Likewise.

From-SVN: r230166

simplify-rtx: Simplify trunc of and of shiftrt

If we have

(truncate:M1 (and:M2 (lshiftrt:M2 (x:M2) C) C2))

we can write it instead as

(and:M1 (lshiftrt:M1 (truncate:M1 (x:M2)) C) C2)

(if that is valid, of course), which has smaller modes for the
binary ops, and the truncate can often simplify further (if "x"
is a register, for example).

* gcc/simplify-rtx.c (simplify_truncation): Simplify TRUNCATE
of AND of [LA]SHIFTRT.

From-SVN: r230164

re PR rtl-optimization/68287 (conditional jump or move depends on uninitialized value in lra-lives.c:1048)

Fix PR rtl-optimization/68287

PR rtl-optimization/68287
* lra-lives.c (lra_create_live_ranges_1): Reserve the right
number of elements.

Co-Authored-By: Richard Biener <rguenther@suse.de>
From-SVN: r230163

Undo delay slot filling and use compact branches in selected cases.

gcc/
* config/mips/mips.c (mips_breakable_sequence_p): New function.
(mips_break_sequence): New function.
(mips_reorg_process_insns) Use them. Use compact branches in selected
          situations.

gcc/testsuite/
        * gcc.target/mips/split-ds-sequence.c: New test.

From-SVN: r230160

Fix whitespace+typo from "Share code from fold_array_ctor_reference with fold."

* fold-const.c (get_array_ctor_element_at_index): Fix whitespace, typo.

From-SVN: r230159

[ARM] PR67305, tighten neon_vector_mem_operand on eliminable registers

2015-11-11  Jiong Wang  <jiong.wang@arm.com>
    Jim Wilson  <wilson@gcc.gnu.org>

PR target/67305
* config/arm/arm.md (neon_vector_mem_operand): Return FALSE if strict
be true and eliminable registers mentioned.

Co-Authored-By: Jim Wilson <wilson@gcc.gnu.org>
From-SVN: r230158

arc-common.c (arc_handle_option): Handle ARCv2 options.

2015-11-11  Claudiu Zissulescu  <claziss@synopsys.com>

* common/config/arc/arc-common.c (arc_handle_option): Handle ARCv2
options.
* config/arc/arc-opts.h: Add ARCv2 CPUs.
* config/arc/arc-protos.h (arc_secondary_reload_conv): Prototype.
* config/arc/arc.c (arc_secondary_reload): Handle subreg (reg)
situation, and store instructions with large offsets.
(arc_secondary_reload_conv): New function.
(arc_init): Add ARCv2 options.
(arc_conditional_register_usage): Select the proper register usage
for ARCv2 processors.
(arc_handle_interrupt_attribute): ILINK2 is only valid for ARCv1
architecture.
(arc_compute_function_type): Likewise.
(arc_print_operand): Handle new ARCv2 punctuation characters.
(arc_return_in_memory): ARCv2 ABI returns in registers up to 16
bytes.
(workaround_arc_anomaly, arc_asm_insn_p, arc_loop_hazard): New
function.
(arc_reorg, arc_hazard): Use it.
* config/arc/arc.h (TARGET_CPU_CPP_BUILTINS): Define __HS__ and
__EM__.
(ASM_SPEC): Add ARCv2 options.
(TARGET_NORM): ARC HS has norm instructions by default.
(TARGET_OPTFPE): Use optimized floating point emulation for ARC
HS.
(TARGET_AT_DBR_CONDEXEC): Only for ARC600 family.
(TARGET_EM, TARGET_HS, TARGET_V2, TARGET_MPYW, TARGET_MULTI):
Define.
(SIGNED_INT16, TARGET_MPY, TARGET_ARC700_MPY, TARGET_ANY_MPY):
Likewise.
(TARGET_ARC600_FAMILY, TARGET_ARCOMPACT_FAMILY): Likewise.
(TARGET_LP_WR_INTERLOCK): Likewise.
* config/arc/arc.md
(commutative_binary_mult_comparison_result_used, movsicc_insn)
(mulsi3, mulsi3_600_lib, mulsidi3, mulsidi3_700, mulsi3_highpart)
(umulsi3_highpart_i, umulsi3_highpart_int, umulsi3_highpart)
(umulsidi3, umulsidi3_700, cstoresi4, simple_return, p_return_i):
Use it for ARCv2.
(mulhisi3, mulhisi3_imm, mulhisi3_reg, umulhisi3, umulhisi3_imm)
(umulhisi3_reg, umulhisi3_reg, mulsi3_v2, nopv, bswapsi2)
(prefetch, divsi3, udivsi3 modsi3, umodsi3, arcset, arcsetltu)
(arcsetgeu, arcsethi, arcsetls, reload_*_load, reload_*_store)
(extzvsi): New pattern.
* config/arc/arc.opt: New ARCv2 options.
* config/arc/arcEM.md: New file.
* config/arc/arcHS.md: Likewise.
* config/arc/constraints.md (C3p): New constraint, accepts 1 and 2
values.
(Cm2): A signed 9-bit integer constant constraint.
(C62): An unsigned 6-bit integer constant constraint.
(C16): A signed 16-bit integer constant constraint.
* config/arc/predicates.md (mult_operator): Add ARCv2 processort.
(short_const_int_operand): New predicate.
* config/arc/t-arc-newlib: Add ARCv2 multilib options.
* doc/invoke.texi: Add documentation for -mcpu=<archs/arcem>
-mcode-density and -mdiv-rem.

From-SVN: r230156

Fix typo.

gcc/
* config/i386/i386.c (m_SKYLAKE_AVX512): Fix typo.

From-SVN: r230155

Fix target arch attribute for Skylake.

gcc/
* config/i386/i386.c: Handle "skylake" and
"skylake-avx512".

gcc/testsuite/
* g++.dg/ext/mv16.C: New functions.

From-SVN: r230153

Fix various memory leaks

* gimple-ssa-strength-reduction.c (create_phi_basis):
Use auto_vec.
* passes.c (release_dump_file_name): New function.
(pass_init_dump_file): Used from this function.
(pass_fini_dump_file): Likewise.
* tree-sra.c (convert_callers_for_node): Use xstrdup_for_dump.
* var-tracking.c (vt_initialize): Use pool_allocator.

From-SVN: r230152

dp-hack.h: Add support for ARCHS.

2015-11-11  Claudiu Zissulescu  <claziss@synopsys.com>

* config/arc/dp-hack.h: Add support for ARCHS.
* config/arc/ieee-754/divdf3.S: Likewise.
* config/arc/ieee-754/divsf3-stdmul.S: Likewise.
* config/arc/ieee-754/muldf3.S: Likewise.
* config/arc/ieee-754/mulsf3.S: Likewise
* config/arc/lib1funcs.S: Likewise
* config/arc/gmon/dcache_linesz.S: Don't read the build register
for ARCv2 cores.
* config/arc/gmon/profil.S (__profil, __profil_irq): Don't profile
for ARCv2 cores.
* config/arc/ieee-754/arc-ieee-754.h (MPYHU, MPYH): Define.
* config/arc/t-arc700-uClibc: Remove hard selection for ARC 700
cores.

From-SVN: r230151

[Patch] PR tree-optimization/68234 Improve range info for loop Phi node

2015-11-11  Richard Biener  <rguenth@gcc.gnu.org>
    Jiong Wang      <jiong.wang@arm.com>
gcc/
  PR tree-optimization/68234
  * tree-vrp.c (vrp_visit_phi_node): Extend SCEV check to those loop PHI
  node which estimiated to be VR_VARYING initially.

gcc/testsuite/
  * gcc.dg/tree-ssa/pr68234.c: New testcase.

Co-Authored-By: Jiong Wang <jiong.wang@arm.com>
From-SVN: r230150

Tighten up checks when tying chains.

gcc/
* regname.c (scan_rtx_reg): Check the matching number of consecutive
registers when tying chains.
(build_def_use): Move terminated_this_insn earlier in the function.

From-SVN: r230149

re PR fortran/67826 (gcc/fortran/openmp.c:1808: bad test ?)

2015-11-11  Dominique d'Humieres <dominiq@lps.ens.fr>

PR fortran/67826
* openmp.c (gfc_omp_udr_find): Fix typo.

From-SVN: r230148

re PR libstdc++/64651 (std::rethrow_exception not found by ADL)

PR libstdc++/64651
* libsupc++/exception_ptr.h (rethrow_exception): Add using-declaration
to __exception_ptr namespace.
* testsuite/18_support/exception_ptr/rethrow_exception.cc: Test ADL.
Remove unnecessary test variables.

From-SVN: r230147

gcc: configure: fix test == bashisms

From-SVN: r230146

aix.h (TARGET_OS_AIX_CPP_BUILTINS): Add cpu and machine asserts.

* config/rs6000/aix.h (TARGET_OS_AIX_CPP_BUILTINS): Add cpu and
machine asserts.  Update defines for 64 bit.

From-SVN: r230145

[ARM] PR63870 Remove error for invalid lane numbers

2015-11-11  Charles Baylis  <charles.baylis@linaro.org>

PR target/63870
* config/arm/neon.md (neon_vld1_lane<mode>): Remove error for invalid
lane number.
(neon_vst1_lane<mode>): Likewise.
(neon_vld2_lane<mode>): Likewise.
(neon_vst2_lane<mode>): Likewise.
(neon_vld3_lane<mode>): Likewise.
(neon_vst3_lane<mode>): Likewise.
(neon_vld4_lane<mode>): Likewise.
(neon_vst4_lane<mode>): Likewise.

From-SVN: r230144

[ARM] PR63870 Mark lane indices of vldN/vstN with appropriate qualifier

2015-11-11  Charles Baylis  <charles.baylis@linaro.org>

PR target/63870
* config/arm/arm-builtins.c: (arm_load1_qualifiers) Use
qualifier_struct_load_store_lane_index.
(arm_storestruct_lane_qualifiers) Likewise.
* config/arm/neon.md: (neon_vld1_lane<mode>) Reverse lane numbers for
big-endian.
(neon_vst1_lane<mode>) Likewise.
(neon_vld2_lane<mode>) Likewise.
(neon_vst2_lane<mode>) Likewise.
(neon_vld3_lane<mode>) Likewise.
(neon_vst3_lane<mode>) Likewise.
(neon_vld4_lane<mode>) Likewise.
(neon_vst4_lane<mode>) Likewise.

From-SVN: r230143

[ARM] PR63870 Add qualifiers for NEON builtins

2015-11-11  Charles Baylis  <charles.baylis@linaro.org>

PR target/63870
* config/arm/arm-builtins.c (enum arm_type_qualifiers): New enumerator
qualifier_struct_load_store_lane_index.
(builtin_arg): New enumerator NEON_ARG_STRUCT_LOAD_STORE_LANE_INDEX.
(arm_expand_neon_args): New parameter. Remove ellipsis. Handle NEON
argument qualifiers.
(arm_expand_neon_builtin): Handle new NEON argument qualifier.
* config/arm/arm.h (NEON_ENDIAN_LANE_N): New macro.

From-SVN: r230142

Daily bump.

From-SVN: r230141

nvptx.opt (moptimize): New flag.

* config/nvptx/nvptx.opt (moptimize): New flag.
* config/nvptx/nvptx.c (nvptx_option_override): Set nvptx_optimize
default.
(nvptx_optimize_inner): New.
(nvptx_process_pars): Call it when optimizing.
* doc/invoke.texi (Nvidia PTX Options): Document -moptimize.

From-SVN: r230137

rs6000.c (rs6000_secondary_reload_direct_move): Remove redundant code.

2015-11-10  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

* config/rs6000/rs6000.c (rs6000_secondary_reload_direct_move):
Remove redundant code.

From-SVN: r230136

libgo: use Solaris sendfile lib, fix Solaris _in6_addr_t fields

    Before Solaris 12 the sendfile function is found in -lsendfile, so look
    for it there.

    Solaris 12 adds some more types that use _in6_addr_t, that need to be
    edited in mksysinfo.

    Patch by Rainer Orth.

    Reviewed-on: https://go-review.googlesource.com/16779

From-SVN: r230132

[PATCH] Fix minor fallout from operand_address changes
2015-11-10  Jeff Law  <law@redhat.com>

* config/ft32/ft32.c (ft32_print_operand): Supply mode to
call to output_address.
* config/moxie/moxie.c (moxie_print_operand_address): Similarly.
Add unnamed machine_mode argument.

From-SVN: r230130

config.gcc (powerpc*-*-*, [...]): Add power9 to hosts that default to 64-bit.

2015-11-10  Michael Meissner  <meissner@linux.vnet.ibm.com>

* config.gcc (powerpc*-*-*, rs6000*-*-*): Add power9 to hosts that
default to 64-bit.

Co-Authored-By: Peter Bergner <bergner@vnet.ibm.com>
From-SVN: r230123

re PR go/68255 (cgo-generated constructor not being called)

PR go/68255
    cmd/go: always use --whole-archive for gccgo packages

    This is a backport of https://golang.org/cl/16775.

    This is, in effect, what the gc toolchain does.  It fixes cases where Go
    code refers to a C global variable; without this, if the global variable
    was the only thing visible in the C code, the generated cgo file might
    not get pulled in from the archive, leaving the Go variable
    uninitialized.

    This was reported against gccgo as https://gcc.gnu.org/PR68255 .

    Reviewed-on: https://go-review.googlesource.com/16778

From-SVN: r230120

i386.md (*movabs<mode>_1): Add explicit size directives for -masm=intel.

* config/i386/i386.md (*movabs<mode>_1): Add explicit
size directives for -masm=intel.
(*movabs<mode>_2): Ditto.

From-SVN: r230119

i386.c (ix86_print_operand): Remove dead code that tried to avoid (%rip) for call operands.

* config/i386/i386.c (ix86_print_operand): Remove dead code that
tried to avoid (%rip) for call operands.

* config/i386/i386.c (ix86_print_operand_address_as): Add no_rip
argument.  Do not use RIP relative addressing when no_rip is set.
(ix86_print_operand): Update call to ix86_print_operand_address_as.
(ix86_print_operand_address): Ditto.
* config/i386/i386.md (*movabs<mode>_1): Use %P modifier for
absolute movabs operand 0.  Add square braces for -masm=intel.
(*movabs<mode>_2): Ditto for operand 1.

From-SVN: r230117

[ARM] Fix costing of vmul+vcvt combine pattern

* config/arm/arm.c (arm_new_rtx_costs, FIX case): Handle
combine_vcvtf2i pattern.

From-SVN: r230116

[ARM][cleanup] Remove uses of CONST_DOUBLE_HIGH/LOW

* config/arm/arm.c (neon_valid_immediate): Remove integer
CONST_DOUBLE handling.  It should never occur.

From-SVN: r230115

[AArch64] Move iterators from atomics.md to iterators.md

* config/aarch64/atomics.md (unspecv): Move to iterators.md.
(ATOMIC_LDOP): Likewise.
(atomic_ldop): Likewise.
* config/aarch64/iterators.md (unspecv): Moved from atomics.md.
(ATOMIC_LDOP): Likewise.
(atomic_ldop): Likewise.

From-SVN: r230114

Fix return type of heterogeneous find for sets

PR libstdc++/68190
* include/bits/stl_multiset.h (multiset::find): Fix return types.
* include/bits/stl_set.h (set::find): Likewise.
* testsuite/23_containers/map/operations/2.cc: Test find return types.
* testsuite/23_containers/multimap/operations/2.cc: Likewise.
* testsuite/23_containers/multiset/operations/2.cc: Likewise.
* testsuite/23_containers/set/operations/2.cc: Likewise.

From-SVN: r230113

Update C++17 library implementation status

* doc/xml/manual/status_cxx2017.xml: Update.
* doc/html/*: Regenerate.

From-SVN: r230108

firstprivate-1.c: Remove inadvertent commit.

* testsuite/libgomp.oacc-c-c++-common/firstprivate-1.c: Remove
inadvertent commit.

From-SVN: r230107

Enhance pool allocator

* alloc-pool.h (allocate_raw): New function.
(operator new (size_t, object_allocator<T> &a)): Use the
function instead of object_allocator::allocate).

From-SVN: r230105

sse.md (HALFMASKMODE): New attribute.

gcc/

* config/i386/sse.md (HALFMASKMODE): New attribute.
(DOUBLEMASKMODE): New attribute.
(vec_pack_trunc_qi): New.
(vec_pack_trunc_<mode>): New.
(vec_unpacks_lo_hi): New.
(vec_unpacks_lo_si): New.
(vec_unpacks_lo_di): New.
(vec_unpacks_hi_hi): New.
(vec_unpacks_hi_<mode>): New.

gcc/testsuite/

* gcc.target/i386/mask-pack.c: New test.
* gcc.target/i386/mask-unpack.c: New test.

From-SVN: r230104

optabs.c (expand_binop_directly): Allow scalar mode for vec_pack_trunc_optab.

gcc/

* optabs.c (expand_binop_directly): Allow scalar mode for
vec_pack_trunc_optab.
* tree-vect-loop.c (vect_determine_vectorization_factor): Skip
boolean vector producers from pattern sequence when computing VF.
* tree-vect-patterns.c (vect_vect_recog_func_ptrs) Add
vect_recog_mask_conversion_pattern.
(search_type_for_mask): Choose the smallest
type if different size types are mixed.
(build_mask_conversion): New.
(vect_recog_mask_conversion_pattern): New.
(vect_pattern_recog_1): Allow scalar mode for boolean vectype.
* tree-vect-stmts.c (vectorizable_mask_load_store): Support masked
load with pattern.
(vectorizable_conversion): Support boolean vectors.
(free_stmt_vec_info): Allow patterns for statements with no lhs.
* tree-vectorizer.h (NUM_PATTERNS): Increase to 14.

From-SVN: r230103

i386-protos.h (ix86_expand_sse_movcc): New.

gcc/

2015-11-10  Ilya Enkovich  <enkovich.gnu@gmail.com>

* config/i386/i386-protos.h (ix86_expand_sse_movcc): New.
* config/i386/i386.c (ix86_expand_sse_movcc): Make public.
Cast mask to FP mode if required.
* config/i386/sse.md (vcond_mask_<mode><avx512fmaskmodelower>): New.
(vcond_mask_<mode><avx512fmaskmodelower>): New.
(vcond_mask_<mode><sseintvecmodelower>): New.
(vcond_mask_<mode><sseintvecmodelower>): New.
(vcond_mask_v2div2di): New.
(vcond_mask_<mode><sseintvecmodelower>): New.
(vcond_mask_<mode><sseintvecmodelower>): New.

From-SVN: r230102

optabs-query.h (get_vcond_mask_icode): New.

gcc/

2015-11-10  Ilya Enkovich  <enkovich.gnu@gmail.com>

* optabs-query.h (get_vcond_mask_icode): New.
* optabs-tree.c (expand_vec_cond_expr_p): Use
get_vcond_mask_icode for VEC_COND_EXPR with mask.
* optabs.c (expand_vec_cond_mask_expr): New.
(expand_vec_cond_expr): Use get_vcond_mask_icode
when possible.
* optabs.def (vcond_mask_optab): New.
* tree-vect-patterns.c (vect_recog_bool_pattern): Don't
generate redundant comparison for COND_EXPR.
* tree-vect-stmts.c (vect_is_simple_cond): Allow SSA_NAME
as a condition.
(vectorizable_condition): Likewise.
* tree-vect-slp.c (vect_get_and_check_slp_defs): Allow
cond_exp with no embedded comparison.
(vect_build_slp_tree_1): Likewise.

From-SVN: r230101

sse.md (maskload<mode>): Rename to ...

2015-11-10  Ilya Enkovich  <enkovich.gnu@gmail.com>

* config/i386/sse.md (maskload<mode>): Rename to ...
(maskload<mode><sseintvecmodelower>): ... this.
(maskstore<mode>): Rename to ...
(maskstore<mode><sseintvecmodelower>): ... this.
(maskload<mode><avx512fmaskmodelower>): New.
(maskstore<mode><avx512fmaskmodelower>): New.

From-SVN: r230100

internal-fn.c (expand_MASK_LOAD): Adjust to maskload optab changes.

gcc/

* internal-fn.c (expand_MASK_LOAD): Adjust to maskload optab changes.
(expand_MASK_STORE): Adjust to maskstore optab changes.
* optabs-query.c (can_vec_mask_load_store_p): Add MASK_MODE arg.
 Adjust to maskload, maskstore optab changes.
* optabs-query.h (can_vec_mask_load_store_p): Add MASK_MODE arg.
* optabs.def (maskload_optab): Transform into convert optab.
(maskstore_optab): Likewise.
* tree-if-conv.c (ifcvt_can_use_mask_load_store): Adjust to
can_vec_mask_load_store_p signature change.
(predicate_mem_writes): Use boolean mask.
* tree-vect-stmts.c (vectorizable_mask_load_store): Adjust to
can_vec_mask_load_store_p signature change.  Allow invariant masks.
(vectorizable_operation): Ignore type precision for boolean vectors.

gcc/testsuite/

* gcc.target/i386/avx2-vec-mask-bit-not.c: New test.

From-SVN: r230099

expr.c (do_store_flag): Use expand_vec_cmp_expr for mask results.

gcc/

* expr.c (do_store_flag): Use expand_vec_cmp_expr for mask results.
(const_vector_mask_from_tree): New.
(const_vector_from_tree): Use const_vector_mask_from_tree
for boolean vectors.
* optabs-query.h (get_vec_cmp_icode): New.
* optabs-tree.c (expand_vec_cmp_expr_p): New.
* optabs-tree.h (expand_vec_cmp_expr_p): New.
* optabs.c (vector_compare_rtx): Add OPNO arg.
(expand_vec_cond_expr): Adjust to vector_compare_rtx change.
(expand_vec_cmp_expr): New.
* optabs.def (vec_cmp_optab): New.
(vec_cmpu_optab): New.
* optabs.h (expand_vec_cmp_expr): New.
* tree-vect-generic.c (expand_vector_comparison): Add vector
comparison optabs check.
* tree-vect-loop.c (vect_determine_vectorization_factor):  Ignore mask
operations for VF.  Add mask type computation.
* tree-vect-stmts.c (get_mask_type_for_scalar_type): New.
(vectorizable_comparison): New.
(vect_analyze_stmt): Add vectorizable_comparison.
(vect_transform_stmt): Likewise.
(vect_init_vector): Support boolean vector invariants.
(vect_get_vec_def_for_operand): Add VECTYPE arg.
(vectorizable_condition): Directly provide vectype for invariants
used in comparison.
* tree-vectorizer.h (get_mask_type_for_scalar_type): New.
(enum vect_var_kind): Add vect_mask_var.
(enum stmt_vec_info_type): Add comparison_vec_info_type.
(vectorizable_comparison): New.
(vect_get_vec_def_for_operand): Add VECTYPE arg.
* tree-vect-data-refs.c (vect_get_new_vect_var): Support vect_mask_var.
(vect_create_destination_var): Likewise.
* tree-vect-patterns.c (check_bool_pattern): Check fails
if we can vectorize comparison directly.
(search_type_for_mask): New.
(vect_recog_bool_pattern): Support cases when bool pattern
check fails.
* tree-vect-slp.c (vect_build_slp_tree_1): Allow
comparison statements.
(vect_get_constant_vectors): Support boolean vector
constants.
* config/i386/i386-protos.h (ix86_expand_mask_vec_cmp): New.
(ix86_expand_int_vec_cmp): New.
(ix86_expand_fp_vec_cmp): New.
* config/i386/i386.c (ix86_expand_sse_cmp): Allow NULL for
op_true and op_false.
(ix86_int_cmp_code_to_pcmp_immediate): New.
(ix86_fp_cmp_code_to_pcmp_immediate): New.
(ix86_cmp_code_to_pcmp_immediate): New.
(ix86_expand_mask_vec_cmp): New.
(ix86_expand_fp_vec_cmp): New.
(ix86_expand_int_sse_cmp): New.
(ix86_expand_int_vcond): Use ix86_expand_int_sse_cmp.
(ix86_expand_int_vec_cmp): New.
(ix86_get_mask_mode): New.
(TARGET_VECTORIZE_GET_MASK_MODE): New.
* config/i386/sse.md (avx512fmaskmodelower): New.
(vec_cmp<mode><avx512fmaskmodelower>): New.
(vec_cmp<mode><sseintvecmodelower>): New.
(vec_cmpv2div2di): New.
(vec_cmpu<mode><avx512fmaskmodelower>): New.
(vec_cmpu<mode><sseintvecmodelower>): New.
(vec_cmpuv2div2di): New.

gcc/testsuite/

* gcc.dg/vect/slp-cond-5.c: New test.

From-SVN: r230098

* include/bits/functional_hash.h: Fix grammar in comment.

From-SVN: r230097

re PR tree-optimization/68240 (compilation hangs on valid code at -O1 and above on x86_64-linux-gnu)

2015-11-10  Richard Biener  <rguenther@suse.de>

PR tree-optimization/68240
* tree-ssa-sccvn.c (cond_stmts_equal_p): Handle commutative compares
properly.
(visit_phi): For PHIs with just a single executable edge
take its value directly.
(expressions_equal_p): Handle VN_TOP properly.

* gcc.dg/torture/pr68240.c: New testcase.

From-SVN: r230095

tree-vect-data-refs.c (vect_slp_analyze_node_dependences): Handle memory using/clobbering stmts without a STMT_VINFO_DATA_REF conservatively.

2015-11-10  Richard Biener  <rguenther@suse.de>

* tree-vect-data-refs.c (vect_slp_analyze_node_dependences):
Handle memory using/clobbering stmts without a STMT_VINFO_DATA_REF
conservatively.

From-SVN: r230094

re PR tree-optimization/56118 (Piecewise vector / complex initialization from constants not combined)

2015-11-10  Richard Biener  <rguenther@suse.de>

PR tree-optimization/56118
* tree-vect-slp.c (vect_bb_vectorization_profitable_p): Make equal
cost favor vectorized version.

* gcc.target/i386/pr56118.c: New testcase.

From-SVN: r230091

[AArch64][2/3] Implement negcc, notcc optabs

* config/aarch64/aarch64.md (<neg_not_op><mode>cc): New define_expand.
* config/aarch64/iterators.md (NEG_NOT): New code iterator.
(neg_not_op): New code attribute.

* gcc.target/aarch64/cond_op_imm_1.c: New test.

From-SVN: r230090

[optabs][ifcvt][1/3] Define negcc, notcc optabs

* ifcvt.c (noce_try_inverse_constants): New function.
(noce_process_if_block): Call it.
* optabs.h (emit_conditional_neg_or_complement): Declare prototype.
* optabs.def (negcc_optab, notcc_optab): Declare.
* optabs.c (emit_conditional_neg_or_complement): New function.
* doc/tm.texi (Standard Names): Document negcc, notcc names.

From-SVN: r230089

[haifa-sched] PR rtl-optimization/68236: Exit early from autoprefetcher lookahead if not in haifa sched

PR rtl-optimization/68236
* haifa-sched.c (autopref_multipass_dfa_lookahead_guard): Return 0
if insn_queue doesn't exist.
(haifa_sched_finish): Reset insn_queue to NULL.

From-SVN: r230088

Tie chains for move instructions.

gcc/
* regrename.c (create_new_chain): Initialize renamed and tied_chain.
(build_def_use): Initialize terminated_this_insn.
(find_best_rename_reg): Pick and check register from the tied chain.
(regrename_do_replace): Mark head as renamed.
(struct du_head *terminated_this_insn). New static variable.
(scan_rtx_reg): Tie chains in move insns.  Set terminated_this_insn.
* regrename.h (struct du_head): Add tied_chain, renamed members.

From-SVN: r230087

* gfortran.dg/pr68251.f90: New test.

From-SVN: r230086

Workaround PR68256 on AArch64

> This is causing a bootstrap comparison failure in gcc/go/gogo.o.

I've had a look at this and the trigger is the
aarch64_use_constant_blocks_p change which appears to be causing a
bootstrap comparison failure because of differences to offsets when
built with debug and without debug. I don't think the problem is
specifically in the backend but this needs some careful
investigation. For now, in the interest of go bootstraps continuing on
trunk - I'm proposing a patch that partially rolls back the change in
aarch64_use_constant_blocks_p and am still looking into the issue but
it will take me some more time to get to the bottom of the issue.

Bootstrapped on aarch64-none-linux-gnu including (c,c++ and go) -
testing finished ok.

2015-11-10  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

PR bootstrap/68256
* config/aarch64/aarch64.c (aarch64_use_constant_blocks_p):
Return false.

From-SVN: r230085

parser.c (cp_finalize_oacc_routine): New boolean first argument.

gcc/cp/
* parser.c (cp_finalize_oacc_routine): New boolean first argument.
(cp_ensure_no_oacc_routine): Update call to cp_finalize_oacc_routine.
(cp_parser_simple_declaration): Maintain a boolean first to keep track
of each new declarator.  Propagate it to cp_parser_init_declarator.
(cp_parser_init_declarator): New boolean first argument.  Propagate it
to cp_parser_save_member_function_body and cp_finalize_oacc_routine.
(cp_parser_member_declaration): Likewise.
(cp_parser_single_declaration): Update call to
cp_parser_init_declarator.
(cp_parser_save_member_function_body): New boolean first_decl argument.
Propagate it to cp_finalize_oacc_routine.
(cp_parser_finish_oacc_routine): New boolean first argument.  Use it to
determine if multiple declarators follow a routine construct.
(cp_parser_oacc_routine): Update call to cp_parser_finish_oacc_routine.

gcc/testsuite/
* c-c++-common/goacc/routine-5.c: Enable c++ tests.

From-SVN: r230082

PR c++/67913 - new expression with negative size not diagnosed

PR c++/67913 - new expression with negative size not diagnosed
PR c++/67927 - array new expression with excessive number of elements
               not diagnosed

gcc/cp/
* call.c (build_operator_new_call): Do not assume size_check
is non-null, analogously to the top half of the function.
* init.c (build_new_1): Detect and diagnose array sizes in
excess of the maximum of roughly SIZE_MAX / 2.
Insert a runtime check only for arrays with a non-constant size.
(build_new): Detect and diagnose negative array sizes.

gcc/testsuite/
* init/new45.C: New test to verify that operator new is invoked
with or without overhead for a cookie.
* init/new44.C: New test for placement new expressions for arrays
with excessive number of elements.
* init/new43.C: New test for placement new expressions for arrays
with negative number of elements.
* other/new-size-type.C: Expect array new expression with
an excessive number of elements to be rejected.

From-SVN: r230081

routine-1.c: New.

gcc/testsuite/
* c-c++-common/goacc/routine-1.c: New.
* c-c++-common/goacc/routine-2.c: New.
* c-c++-common/goacc/routine-3.c: New.
* c-c++-common/goacc/routine-4.c: New.
* c-c++-common/goacc/routine-5.c: New.

libgomp/
* testsuite/libgomp.oacc-c-c++-common/firstprivate-1.c: New.
* testsuite/libgomp.oacc-c-c++-common/routine-g-1.c: New.
* testsuite/libgomp.oacc-c-c++-common/routine-gwv-1.c: New.
* testsuite/libgomp.oacc-c-c++-common/routine-v-1.c: New.
* testsuite/libgomp.oacc-c-c++-common/routine-w-1.c: New.
* testsuite/libgomp.oacc-c-c++-common/routine-wv-1.c: New.

From-SVN: r230080

re PR target/57845 (ICE with -freg-struct-return on SPARC)

PR target/57845
* config/sparc/sparc.c (sparc_function_value_1): In 32-bit mode, do
not promote the mode for aggregate types.

From-SVN: r230074

omp-low.h (replace_oacc_fn_attrib, [...]): Declare.

* omp-low.h (replace_oacc_fn_attrib, build_oacc_routine_dims): Declare.
* omp-low.c (build_oacc_routine_dims): New.

c/
* c-parser.c (c_parser_declaration_or_fndef): Add OpenACC
routine arg.
(c_parser_declaration_or_fndef): Call c_finish_oacc_routine.
(c_parser_pragma): Parse 'acc routine'.
(OACC_ROUTINE_CLAUSE_MARK): Define.
(c_parser_oacc_routine, (c_finish_oacc_routine): New.

c-family/
* c-pragma.c (oacc_pragmas): Add "routine".
* c-pragma.h (pragma_kind): Add PRAGMA_OACC_ROUTINE.

cp/
* parser.h (struct cp_parser): Add oacc_routine field.
* parser.c (cp_ensure_no_oacc_routine): New.
(cp_parser_new): Initialize oacc_routine field.
(cp_parser_linkage_specification): Call cp_ensure_no_oacc_routine.
(cp_parser_namespace_definition,
cp_parser_class_specifier_1): Likewise.
(cp_parser_init_declarator): Call cp_finalize_oacc_routine.
(cp_parser_function_definition,
cp_parser_save_member_function_body): Likewise.
(OACC_ROUTINE_CLAUSE_MASK): New.
(cp_parser_finish_oacc_routine, cp_parser_oacc_routine,
cp_finalize_oacc_routine): New.
(cp_parser_pragma): Adjust omp_declare_simd checking.  Call
cp_ensure_no_oacc_routine.
(cp_parser_pragma): Add OpenACC routine handling.

From-SVN: r230072

Daily bump.

From-SVN: r230069

constraints.md (wF constraint): New constraints for power9/toc fusion.

[gcc]
2015-11-08  Michael Meissner  <meissner@linux.vnet.ibm.com>

* config/rs6000/constraints.md (wF constraint): New constraints
for power9/toc fusion.
(wG constraint): Likewise.

* config/rs6000/predicates.md (u6bit_cint_operand): New
predicate, recognize 0..63.
(upper16_cint_operand): New predicate for power9 and toc fusion.
(fpr_reg_operand): Likewise.
(toc_fusion_or_p9_reg_operand): Likewise.
(toc_fusion_mem_raw): Likewise.
(toc_fusion_mem_wrapped): Likewise.
(fusion_gpr_addis): If power9 fusion, allow fusion for a larger
address range.
(fusion_gpr_mem_combo): Delete, use fusion_addis_mem_combo_load
instead.
(fusion_addis_mem_combo_load): Add support for power9 fusion of
floating point loads, floating point stores, and gpr stores.
(fusion_addis_mem_combo_store): Likewise.
(fusion_offsettable_mem_operand): Likewise.

* config/rs6000/rs6000-protos.h (emit_fusion_addis): Add
declarations.
(emit_fusion_load_store): Likewise.
(fusion_p9_p): Likewise.
(expand_fusion_p9_load): Likewise.
(expand_fusion_p9_store): Likewise.
(emit_fusion_p9_load): Likewise.
(emit_fusion_p9_store): Likewise.
(fusion_wrap_memory_address): Likewise.

* config/rs6000/rs6000.c (struct rs6000_reg_addr): Add new
elements for power9 fusion.
(rs6000_debug_print_mode): Rework debug information to print more
information about fusion.
(rs6000_init_hard_regno_mode_ok): Setup for power9 fusion
support.
(rs6000_legitimate_address_p): Recognize toc fusion as a valid
offsettable memory address.
(rs6000_rtx_costs): Update costs for new ISA 3.0 instructions.
(emit_fusion_gpr_load): Move most of the code from
emit_fusion_gpr_load into emit_fusion-addis that handles both
power8 and power9 fusion.
(emit_fusion_addis): Likewise.
(emit_fusion_load_store): Likewise.
(fusion_wrap_memory_address): Add support for TOC fusion.
(fusion_split_address): Likewise.
(fusion_p9_p): Add support for power9 fusion.
(expand_fusion_p9_load): Likewise.
(expand_fusion_p9_store): Likewise.
(emit_fusion_p9_load): Likewise.
(emit_fusion_p9_store): Likewise.

* config/rs6000/rs6000.h (TARGET_EXTSWSLI): Macros for support for
new instructions in ISA 3.0.
(TARGET_CTZ): Likewise.
(TARGET_TOC_FUSION_INT): Macros for power9 fusion support.
(TARGET_TOC_FUSION_FP): Likewise.

* config/rs6000/rs6000.md (UNSPEC_FUSION_P9): New power9/toc
fusion unspecs.
(UNSPEC_FUSION_ADDIS): Likewise.
(QHSI mode iterator): New iterator for power9 fusion.
(GPR_FUSION): Likewise.
(FPR_FUSION): Likewise.
(mod<mode>3): Add support for ISA 3.0
modulus instructions.
(umod<mode>3): Likewise.
(divmod peephole): Likewise.
(udivmod peephole): Likewise.
(ctz<mode>2): Add support for ISA 3.0 count trailing zeros scalar
instructions.
(ctz<mode>2_h): Likewise.
(ashdi3_extswsli): Add support for ISA 3.0 EXTSWSLI instruction.
(ashdi3_extswsli_dot): Likewise.
(ashdi3_extswsli_dot2): Likewise.
(power9 fusion splitter): New power9/toc fusion support.
(toc_fusionload_<mode>): Likewise.
(toc_fusionload_di): Likewise.
(fusion_gpr_load_<mode>): Update predicate function.
(power9 fusion peephole2s): New power9/toc fusion support.
(fusion_gpr_<P:mode>_<GPR_FUSION:mode>_load): Likewise.
(fusion_gpr_<P:mode>_<GPR_FUSION:mode>_store): Likewise.
(fusion_fpr_<P:mode>_<FPR_FUSION:mode>_load): Likewise.
(fusion_fpr_<P:mode>_<FPR_FUSION:mode>_store): Likewise.
(fusion_p9_<mode>_constant): Likewise.

[gcc/testsuite]
2015-11-08  Michael Meissner  <meissner@linux.vnet.ibm.com>

* lib/target-supports.exp (check_p8vector_hw_available): Split
long line.
(check_vsx_hw_available): Likewise.
(check_p9vector_hw_available): Add new checks for ISA 3.0 hardware
support and for PowerPC float128 support.
(check_p9modulo_hw_available): Likewise.
(check_ppc_float128_sw_available): Likewise.
(check_ppc_float128_hw_available): Likewise.
(check_effective_target_powerpc_p9vector_ok): Likewise.
(check_effective_target_powerpc_p9modulo_ok): Likewise.
(check_effective_target_powerpc_float128_sw_ok): Likewise.
(check_effective_target_powerpc_float128_hw_ok): Likewise.
(is-effective-target): Add new PowerPc targets.
(is-effective-target-keyword): Likewise.
(check_vect_support_and_set_flags): If we have ISA 3.0 vector
instructions, use it.

* gcc.target/powerpc/mod-1.c: New test for ISA 3.0 instructions.
* gcc.target/powerpc/mod-2.c: Likewise.
* gcc.target/powerpc/ctz-1.c: Likewise.
* gcc.target/powerpc/ctz-2.c: Likewise.
* gcc.target/powerpc/extswsli-1.c: Likewise.
* gcc.target/powerpc/extswsli-2.c: Likewise.
* gcc.target/powerpc/extswsli-3.c: Likewise.

* gcc.target/powerpc/fusion.c (fusion_vector): Move to fusion2.c
and allow the test on PowerPC LE.
* gcc.target/powerpc/fusion2.c (fusion_vector): Likewise.
* gcc.target/powerpc/fusion3.c: New file, test power9 fusion.

* gcc.target/powerpc/float128-call.c: Use powerpc_float128_sw_ok
check instead of powerpc_vsx_ok.
* gcc.target/powerpc/float128-mix.c: Likewise.

From-SVN: r230066

optabs.c (prepare_libcall_arg): New function.

2015-11-09  Steve Ellcey  <sellcey@imgtec.com>

* optabs.c (prepare_libcall_arg): New function.
(expand_fixed_convert): Add call to prepare_libcall_arg.

From-SVN: r230065

* gcc.dg/sso/*.c: Robustify dg-output directives.

From-SVN: r230063

[sched] Dump dependency graph to a dot file

* sched-int.h (dump_rgn_dependencies_dot): Declare
* sched-rgn.c (dump_rgn_dependencies_dot): New function
* print-rtl.h (print_insn): Add prototype

From-SVN: r230062

Change behavior of -fsched-verbose option

* haifa-sched.c (setup_sched_dump): Don't redirect output to stderr.
* common.opt (-fsched-verbose): Set default value to 1.
* invoke.texi (-fsched-verbose): Update the option's description.

From-SVN: r230061

visium.h (PRINT_OPERAND): Delete.

* config/visium/visium.h (PRINT_OPERAND): Delete.
(PRINT_OPERAND_PUNCT_VALID_P): Likewise.
(PRINT_OPERAND_ADDRESS): Likewise.
* config/visium/visium.c (TARGET_PRINT_OPERAND_PUNCT_VALID_P): Define
to...
(visium_print_operand_punct_valid_p): ...this.  New function.
(TARGET_PRINT_OPERAND): Define to...
(print_operand): Rename to...
(visium_print_operand): ...this.
(TARGET_PRINT_OPERAND_ADDRESS): Define to...
(visium_output_address): Rename to...
(visium_print_operand_address): ...this.
(print_operand_address): Delete.

From-SVN: r230060

re PR middle-end/68259 ([sso] tree checking failure in reverse_storage_order_for_component_p, at tree.h:4392)

PR middle-end/68259
* tree.h (reverse_storage_order_for_component_p) <COMPONENT_REF>:
Check that the type of the first operand is an aggregate type.

From-SVN: r230056

omp-low.c: Fix some OpenACC comment typos.

* omp-low.c: Fix some OpenACC comment typos.
(lower_reduction_clauses): Remove BUILT_IN_GOACC_GET_THREAD_NUM call.
* omp-builtins.def (BUILT_IN_GOACC_GET_THREAD_NUM,
BUILT_IN_GOACC_GET_NUM_THREADS): Delete.

From-SVN: r230054

2015-11-09  François Dumont  <fdumont@gcc.gnu.org>

* include/bits/stl_algo.h
(partial_sort_copy): Instantiate std::iterator_traits only if concept
checks.
(lower_bound): Likewise.
(upper_bound): Likewise.
(equal_range): Likewise.
(binary_search): Likewise.
* include/bits/stl_heap.h (pop_heap): Likewise.

From-SVN: r230052

i386.md (*strmovqi_1): Fix insn enable condition.

* config/i386/i386.md (*strmovqi_1): Fix insn enable condition.

From-SVN: r230050

Re: [PATCH] Minor refactoring in tree-ssanames.c & freelists verifier

* tree-ssanames.c (verify_ssaname_freelists): Simplify check for
being in gimple/ssa form.  Remove redundant check for SSA_NAME.
Fix comment typo.

From-SVN: r230049

pr66326.cc: Do not include cilk.h.

* g++.dg/cilk-plus/CK/pr66326.cc: Do not include cilk.h.
(main): Use _Cilk_spawn instead of cilk_spawn.

From-SVN: r230048

Resolve DejaGnu hard stop

gcc/testsuite/
* gcc.target/i386/addr-space-3.c: Fix quoting in dg-final
scan-assembler directive.

From-SVN: r230038

Support sized delete.

This adds transactional clones of the sized version of operator delete.

From-SVN: r230036

rs6000.opt (-mpower9-fusion): Add new switches for ISA 3.0 (power9).

2015-11-09  Michael Meissner  <meissner@linux.vnet.ibm.com>

* config/rs6000/rs6000.opt (-mpower9-fusion): Add new switches for
ISA 3.0 (power9).
(-mpower9-vector): Likewise.
(-mpower9-dform): Likewise.
(-mpower9-minmax): Likewise.
(-mtoc-fusion): Likewise.
(-mmodulo): Likewise.
(-mfloat128-hardware): Likewise.

* config/rs6000/rs6000-cpus.def (ISA_3_0_MASKS_SERVER): Add option
mask for ISA 3.0 (power9).
(POWERPC_MASKS): Add new ISA 3.0 switches.
(power9 cpu): Add power9 cpu.

* config/rs6000/rs6000.h (ASM_CPU_POWER9_SPEC): Add support for
power9.
(ASM_CPU_SPEC): Likewise.
(EXTRA_SPECS): Likewise.

* config/rs6000/rs6000-opts.h (enum processor_type): Add
PROCESSOR_POWER9.

* config/rs6000/rs6000.c (power9_cost): Initial cost setup for
power9.
(rs6000_debug_reg_global): Add support for power9 fusion.
(rs6000_setup_reg_addr_masks): Cache mode size.
(rs6000_option_override_internal): Until real power9 tuning is
added, use -mtune=power8 for -mcpu=power9.
(rs6000_setup_reg_addr_masks): Do not allow pre-increment,
pre-decrement, or pre-modify on SFmode/DFmode if we allow the use
of Altivec registers.
(rs6000_option_override_internal): Add support for ISA 3.0
switches.
(rs6000_loop_align): Add support for power9 cpu.
(rs6000_file_start): Likewise.
(rs6000_adjust_cost): Likewise.
(rs6000_issue_rate): Likewise.
(insn_must_be_first_in_group): Likewise.
(insn_must_be_last_in_group): Likewise.
(force_new_group): Likewise.
(rs6000_register_move_cost): Likewise.
(rs6000_opt_masks): Likewise.

* config/rs6000/rs6000.md (cpu attribute): Add power9.
* config/rs6000/rs6000-tables.opt: Regenerate.

* config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Define
_ARCH_PWR9 if power9 support is available.

* config/rs6000/aix61.h (ASM_CPU_SPEC): Add power9.
* config/rs6000/aix53.h (ASM_CPU_SPEC): Likewise.

* configure.ac: Determine if the assembler supports the ISA 3.0
instructions.
* config.in (HAVE_AS_POWER9): Likewise.
* configure: Regenerate.

* doc/invoke.texi (RS/6000 and PowerPC Options): Document ISA 3.0
switches.

From-SVN: r230031

[AArch64][cleanup] Remove uses of CONST_DOUBLE_HIGH, CONST_DOUBLE_LOW

* config/aarch64/aarch64.c (aarch64_simd_valid_immediate):
Remove integer CONST_DOUBLE handling.  It should never occur.

From-SVN: r230030

[AArch64] PR target/68129: Define TARGET_SUPPORTS_WIDE_INT

PR target/68129
* config/aarch64/aarch64.h (TARGET_SUPPORTS_WIDE_INT): Define to 1.
* config/aarch64/aarch64.c (aarch64_print_operand, CONST_DOUBLE):
Delete VOIDmode case.  Assert that mode is not VOIDmode.
* config/aarch64/predicates.md (const0_operand): Remove const_double
match.

* gcc.dg/pr68129_1.c: New test.

From-SVN: r230029

Fix memory leaks in IPA.

* ipa-inline-analysis.c (estimate_function_body_sizes): Call
body_info release function.
* ipa-prop.c (ipa_release_body_info): New function.
(ipa_analyze_node): Call the function.
(ipa_node_params::~ipa_node_params): Release known_csts.
* ipa-prop.h (ipa_release_body_info): Declare.

From-SVN: r230028