mesa/cs: Update program.c for compute shaders.

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

mesa/cs: Add inline functions for dealing with compute shaders.

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/cs: Add BRW_NEW_COMPUTE_PROGRAM state flag.

Also add code to brw_upload_state to set it when the compute program
changes.

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/fs: Strip trailing constant zeroes in sample messages

If a send message is emitted with a message length that is less than
required for the message then the remaining parameters default to
zero. We can take advantage of this to save a register when a shader
passes constant zeroes as the final coordinates to the sample
function.

I think this might be useful for GLES applications that are using 2D
textures to simulate 1D textures.

On Skylake it will be useful for shaders that do
texelFetch(tex,something,0) which I think is fairly common. This helps
more on Skylake because in that case the order of the instruction
operands are u,v,lod,r which is good for 2D textures whereas before
they were u,lod,v,r which is only good for 1D textures.

On Haswell:
total instructions in shared programs: 8535730 -> 8533261 (-0.03%)
instructions in affected programs:     236968 -> 234499 (-1.04%)
helped:                                1174

On Skylake:
total instructions in shared programs: 10345646 -> 10341237 (-0.04%)
instructions in affected programs:     293011 -> 288602 (-1.50%)
helped:                                1218

Reviewed-by: Matt Turner <mattst88@gmail.com>
v2: Applied suggestions by Kenneth Graunke:
    - Only apply on Gen5+
    - Apply to all texture opcodes, not just TEX and TXF.
    Moved the optimisation into the loop as suggested by Matt Turner.
    Fix the array index when there is a header.

i965/skl: Force the exec size to 8 when initing header for SIMD4x2

On Gen9+ there needs to be a header when sampling using SIMD4x2. The
header is set up by copying from the g0 register. Commit 07c571a39f
tried to fix this mov instruction to always use an exec size of 8
because previously it was incorrectly using 4. It did this by casting
the type of the destination register to vec8. This was done because
there is code in brw_set_dest to guess the exec size based on the
width of the dest register. However I misunderstood how this works
because it is actually only used when the width is less than 8. That
means the patch actually changed it to use the default exec size which
on SIMD16 would be 16 and the MOV would clobber over the first
register in the send message. This patch makes it additionally set the
default exec size to 8. This is similar to how the message is set up
in fs_generator::generate_tex.

I think this wasn't picked up by any Piglit tests because we don't
have any fragment shaders that hit this code path so nothing was using
SIMD16. However the patch caused failures in deqp tests.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90153
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Tapani Pälli <tapani.palli@intel.com>

i965: Unhardcode a few more stage names and abbreviations.

The stage_abbrev and stage_name fields in backend_visitor provide what
we need without any additional effort.  It also means we'll get the
right names for compute shaders, SIMD8 geometry shaders, and both kinds
of tessellation shaders.

This does unfortunately change the capitalization of the stage
abbreviation in the INTEL_DEBUG=optimizer output filenames.  It doesn't
seem worth adding code to handle, though.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

docs/relnotes: document the new EGL sync extensions

st/dri: implement the fence interface for CL events

gallium,clover: add OpenCL interoperability support for CL events

v2: - move interop.cpp to clover/api
    - change intptr_t to void* in the interface
    - add a virtual function fence() to simplify some code

v3: - use bool in the interface
v4: - enclose the last two interop functions in try..catch

Reviewed-by: Francisco Jerez <currojerez@riseup.net>

st/dri: implement the fence interface

egl/dri2: return the latest sync status in eglGetSyncAttribKHR

egl/dri2: implement EGL_KHR_cl_event2 (v2)

v2: fix the SYNC_CONDITION query

egl/dri2: implement EGL_KHR_wait_sync

egl/dri2: implement EGL_KHR_fence_sync

mesa: add GL_OES_EGL_sync

This is an empty extension whose presence means that EGL sync objects can be
used with ES contexts.

dri_interface: add an interface for fences

egl/dri: don't expose configs with an accumulation buffer

nvc0/ir: fix predicated PFETCH for real

Commit a9d08a250 accidentally didn't make use of the new src1 variable.
Use it.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org

nv50/ir: fix asFlow() const helper for OP_JOIN

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org

nvc0/ir: fix predicated PFETCH emission

src1 would contain the predicate, which would get emitted as a register
source by an undiscerning srcId helper. Work around this in the same way
as in emitTEX.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org

gk110/ir: fix set with a register dest to not auto-set the abs flag

This was causing src0 to always have the absolute value flag set.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org

i965/blorp: Prepare drawing rectangle for flipped coordinates

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/blorp: Add support for layered rendering

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/blorp: Allow blend state to be set for multiple render targets

Original blorp writes only one buffer per shader invocation. Once
the launch mechanism is shared with glsl-based programs there will
be need for supporting multiple render targets.

Also drop the always constant color write disable settings.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/blorp: Prepare for attributes other than render position

Note that the magic number of one in gen7 logic is replaced by
BRW_SF_URB_ENTRY_READ_OFFSET ( == 1 also) for clarity.

On gen6 the change from zero to one (BRW_SF_URB_ENTRY_READ_OFFSET)
has no effect for native blorp as blorp doesn't use any
additional attributes. In fact, regular pipeline setup always
uses BRW_SF_URB_ENTRY_READ_OFFSET even when there are no additional
attributes. Hence the change makes the two (blorp and regular)
consistent.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/blorp: Remove unused arguments

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/gen7/blorp: Remove unused arguments

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/blorp: Allow caller to provide sampler settings

v2 (Ken): s/use_unorm_coords/non_normalized_coords/

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/blorp: Refactor vertex buffer state setup

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/blorp: Remove constant parameter

This was still needed when we had support for blorp clears but now
this is fixed to nop.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/gen8: Expose state base address setup

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/ps/gen8: Refactor state uploading

v2: Use SET_FIELD() for sampler count, and for that reason
    added GEN7_PS_SAMPLER_COUNT_MASK.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/ps/gen7: Refactor state uploading

Now the uploading depends only on the input parameters instead
of consulting the current gl-state.

v2: Rebased on top of sampler count clamping

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Refactor sampler state setup

v2 (Matt): Moved * to the name.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Remove dependency to tex object in default color setup

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Refactor and expose brw_upload_binding_table()

Read and write parts of the state stage are also split into
explicit arguments allowing future patches to use constant
program data.

v2 (Ken): s/BRW_NEW_WM_PROG_DATA/BRW_NEW_FS_PROG_DATA/

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Expose and refactor brw_update_renderbuffer_surfaces()

Note that brw_update_renderbuffer_surfaces() already had a helper
variable which was used in parallel to direct access of the current
draw buffer of the context.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Refactor rb surface setup to allow caller to store offsets

Notice that in gen7_wm_surface_state.c there is also indentation
change in the surrounding code removing tabs.

v2 (Matt): Fixed whitespace: tabs -> spaces

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/gen8: Use constant pointers for reading miptree details

Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/ps: Use SET_FIELD() for sampler count

The value is actually clamped to 0-16 as sample state pointer
can be used to support more than 16 samplers.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

glx: Massive update of comments in struct extension_info

In response to another patch, Emil asked for some clarification how this
stuff works.  Rather than just reply to the e-mail, I decided to update
the exlanation in the code.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: Emil Velikov <emil.l.velikov@gmail.com>

winsys/radeon: add a private interface for radeon_surface

winsys/radeon: move radeon_winsys.h to drivers/radeon

clover: remove util/compat

Acked-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>

i965: Don't try to apply the opt_sampler_eot extension for vs

The opt_sampler_eot optimisation of fs_visitor effectively assumes
that it is running on a fragment shader because it casts the program
key to a brw_wm_prog_key. However on Skylake fs_visitor can also be
used for vertex shaders. It looks like this usually works anyway
because the optimisation is skipped if key->nr_color_regions != 1.
However for a vertex shader the key is actually a brw_vs_prog_key so
the space for nr_color_regions is probably taken up by
key->base.program_string_id. This can end up making nr_color_regions
be 1 in which case the function will later assert when the last
instruction is not FS_OPCODE_FB_WRITE. This was making the DEQP test
suite assert. Presumably this only happens there because that compiles
a lot of shaders so it would end up with a high value for
program_string_id.

Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

r300: do not link against libdrm_intel

Accidentally added since the introduction of the file.

Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

clover: make module::symbol::name a string

Acked-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>

clover: remove compat::string

Acked-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>

clover: remove compat classes that match std one

Acked-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>

clover: compile all sources with c++11

Later we can remove the compat code

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>

st/nine: Remove Managed texture hack.

Previously binding an unitialized managed texture
was causing a crash, and a workaround was added to
prevent the crash.

This patch removes this workaround and instead set the initial
state of managed textures as dirty, so that when the texture is bound
for the first time, it is always initialized.

Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Enforce LOD 0 for D3DUSAGE_AUTOGENMIPMAP

For D3DUSAGE_AUTOGENMIPMAP textures, applications can only
lock/copy from/get surface descriptor for/etc the first level.
Thus it makes sense to restrict the LOD to 0, and use only the first
level to generate the sublevels.

Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Some D3DUSAGE_AUTOGENMIPMAP fixes

Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: util_gen_mipmap doesn't need we reset states.

util_gen_mipmap uses pipe->blit, and thus doesn't need
we restore all states after using it.

Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: D3DUSAGE_AUTOGENMIPMAP is forbidden for volumes

Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix NineBaseTexture9_PreLoad

It wasn't uploading the texture when the lod
had changed.

Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Rewrite Managed texture uploads

That part of the code was quite obscure.
This new implementation tries to make it clearer
by separating the differents parts, and commenting more.

Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Bound the dirty regions to resource size

Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Simplify Surface9 Managed resources implementation

Remove the Surface9 code for dirty rects, used only for Managed
resources. Instead convey the information to the parent texture.

According to documentation, this seems to be the expected behaviour,
and if documentation is wrong there, that's not a problem since it can
only leads to more texture updates in corner cases.

Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Remove impossible cases with Managed textures

Copying to/from a Managed texture is forbidden.
Rendering to a Managed texture is forbidden.

Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Encapsulate variables for MANAGED resource

Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Rework texture data allocation

Some applications assume the memory for multilevel
textures is allocated per continuous blocks.

This patch implements that behaviour.

v2: cache offsets

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix update_vertex_elements bad rebase

This code was supposed to be removed, but a rebase seems to have
made it stay.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Add debug warning when application uses sw processing

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Rework update_vertex_buffers

Previous code was trying to optimise to call set_vertex_buffers on
big packets, and thus avoids as many calls as possible.

However in practice doing so won't be faster (drivers implement
set_vertex_buffers by a loop over the buffers we want to bind)

When we want to unbind a buffer, we were calling set_vertex_buffers
on a buffer with vtxbuf->buffer = NULL. It works on some drivers,
but not on all of them, because it isn't in Gallium spec.
This patch fixes that.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix computation of const_used_size

Was sometimes too large for PS.

Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Xavier Bouchoux <xavierb@gmail.com>

gallium/svga: Remove useless ARRAY_SIZE declaration

This is already declared in util/macros.h

Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>

util/macros: Move DIV_ROUND_UP to util/macros.h

Move DIV_ROUND_UP to a shared location accessible everywhere

Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix behaviour of D3DUSAGE_QUERY_POSTPIXELSHADER_BLENDING

Ignore D3DUSAGE_QUERY_POSTPIXELSHADER_BLENDING when
D3DUSAGE_RENDERTARGET is not specified.

This behaviour matches windows drivers.

Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Xavier Bouchoux <xavierb@gmail.com>

st/nine: Improve D3DQUERYTYPE_TIMESTAMP

Avoid blocking when retrieving D3DQUERYTYPE_TIMESTAMP result with
NineQuery9_GetData(), when D3DGETDATA_FLUSH is not specified.
This mimics Win behaviour and gives slightly better performance
for some games.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Xavier Bouchoux <xavierb@gmail.com>

st/nine: Fix D3DQUERYTYPE_TIMESTAMPFREQ query

D3DQUERYTYPE_TIMESTAMPFREQ is supposed to give the frequency
at which the clock of D3DQUERYTYPE_TIMESTAMP runs.

PIPE_QUERY_TIMESTAMP returns a value in ns, thus the corresponding
frequency is 1000000000.
PIPE_QUERY_TIMESTAMP_DISJOINT returns the frequency at which
PIPE_QUERY_TIMESTAMP value is updated. It isn't always
1000000000.

Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Xavier Bouchoux <xavierb@gmail.com>

st/nine: Change x86 FPU Control word on device creation

As on wined3d and windows, when D3DCREATE_FPU_PRESERVE is not
specified, change the fpu control word to all exceptions masked,
single precision, round to nearest.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com>

st/nine: Do not advertise D3DDEVCAPS_TEXTURESYSTEMMEMORY

No major vendor advertises it, and we weren't supporting it.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix comment in update_viewport

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Workaround barycentrics issue on some cards

Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Clear struct pipe_blit_info before use.

render_condition_enable was uninitialized.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Xavier Bouchoux <xavierb@gmail.com>

st/nine: NineDevice9_Clear skip fastpath for bigger depth-buffers

This adds an additional check to make sure the bound depth-buffer doesn't
exceed the rendertarget size when clearing depth and color buffer at once.
D3D9 clears only a rectangle with the same dimensions as the viewport, leaving
other parts of the depth-buffer intact.

This fixes failing WINE test visual.c:depth_buffer_test()

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix wrong assert in nine_shader

The sampler src index was wrong for texldl and texldd

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Handle special LIT case

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>

mesa: Fix glGetProgramiv(GL_ACTIVE_ATTRIBUTES).

It's returning random values, because RESOURCE_VAR() is casting
different objects into ir_variable pointers.

This updates _mesa_count_active_attribs to filter the resources with the
same logic used in _mesa_longest_attribute_name_length.

https://bugs.freedesktop.org/show_bug.cgi?id=90207

Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

egl: misc fixes for EGL_MESA_image_dma_buf_export

Fix define and a function argument name introduced in commit
8f7338f284cdb1fef64c85e3293d2200d0cc6387

Signed-off-by: Dave Airlie <airlied@redhat.com>

nvc0/ir: flush denorms to zero in non-compute shaders

This will set the FTZ flag (flush denorms to zero) on all opcodes that
can take it.

This resolves issues in Unigine Heaven 4.0 where there were solid-filled
boxes popping up.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89455
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

meta: remove unneeded #include colortab.h

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

mesa: remove unneeded #include colortab.h

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

mesa: remove unused options var in compile_shader()

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

docs: more details about Viewperf 12 medical-01 test issues

nvc0: expose GLSL version 410

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

st/mesa: allow glsl version up to 410, enable ARB_shader_precision

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/va: add h264 decoder level support

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/omx/dec: add h264 decoder level support

v2: use sps level idc as level to driver

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

vl: add level idc in sps

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/omx/dec: separate create_video_codec to different codecs

v2: get frame size from port info

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/vdpau: add h264 decoder level support

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

gallium/util: get h264 level based on number of max references and resolution

v2: add commments for limitation of max references numbers,
and what the caculation is based

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

r600g,radeonsi: add a driver query returning GPU load

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

r600g,radeonsi: add driver queries for GPU temperature and shader+memory clocks

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

gm107/ir: add lane/vertex count sysvals

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

gk110/ir: add support for writing per-patch and shader outputs

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

freedreno/a3xx: color masking works like a blend for some formats

When there is a colormask active that does not cover all the channels,
enable reading in the destination like with a combining blend
operation. This fixes fbo-blending-formats on a3xx.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

freedreno/a3xx: add support for S8 and Z32F_S8

Enables ARB_depth_buffer_float. There is no sampling support for
interleaved Z32F_S8, so we store the two textures separately, one as
Z32F, the other as S8. As a result, we need a lot of additional logic
for restores and transfers.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>