cairo: bump to 1.14.10

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

busybox: bump to version 1.27.2

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libtommath: set PREFIX when installing

The default value is /usr/local and causes breakage in libtomcrypt & moarvm

Fixes:

  http://autobuild.buildroot.net/results/a760063f05ae23f79920bc89ffc37e7dcf77aeab/
  http://autobuild.buildroot.net/results/78c9bc9a21cfce48615b70d80b25dd4847bd803b/

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/tests: use relative test_dir

When we list the available tests, we use test_dir, which is set from
the path of the script. However, when we run the tests, we use the
hard-coded path.

Ditto to find the config file.

For consistency, always use test_dir.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/scripts/check-bin-arch: fix symbolic link check

Commit c96b8675ea03a5d3194d439f740c725dd239ed1a
("support/scripts/check-bin-arch: ignore symbolic links") was bogus,
because it tested ${f}, which is the relative path of the file inside
${TARGET_DIR}, so we end up testing if ${f} on the system is a
symbolic link.

This commit fixes that by testing ${TARGET_DIR}/${f}.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/scripts/check-bin-arch: ignore symbolic links

Since commit da32b49f0091ee9dfb613e0f00973bf6893bfa84
("instrumentation: extend packages-file-list.txt with symlinks and
directories"), the packages-file-list.txt also contains symbolic
links. Therefore, check-bin-arch is now also checking symbolic links.

However, symbolic links in $(TARGET_DIR) can have absolute path as
targets, such as:

$ ls -l output/target/sbin/ifdown
lrwxrwxrwx 1 thomas thomas 10 Sep  3 15:55 output/target/sbin/ifdown -> /sbin/ifup

Therefore, we are now potentially checking a host binary, which
obviously makes check-bin-arch fail.

This commit changes check-bin-arch to ignore symbolic links. Indeed,
we have two cases:

 - The symbolic link really points to something that will in the
   rootfs (such as /sbin/ifup above). In this case, /sbin/ifup will be
   checked separately by check-bin-arch.

 - The symbolic link doesn't point to something that will be in the
   rootfs, and that is not a problem from the perspective of
   check-bin-arch, which checks the architecture of target binaries.

Fixes:

  http://autobuild.buildroot.net/results/16d384a0183d477646ac7692feb65f00dde7d068/
  (vim)

  http://autobuild.buildroot.net/results/50429c0f63a8befff9e20899327b9a8d754d99be/
  (ifupdown)

  http://autobuild.buildroot.net/results/1db65973e782bfa61abcbccd3501bfd235f77288/
  (gawk)

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libcgi: add patch to fix static library building

The new libcgi build system was forcing the build of a shared library,
breaking the build on static-only configurations. This commit adds a
libcgi patch (submitted upstream) that makes its build system use the
default CMake behavior (rely on BUILD_SHARED_LIBS).

Fixes:

  http://autobuild.buildroot.net/results/c166aa1eda9d86083a1aeefd8631ed45dbcb05e7/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/log4cpp: force autoreconf

The upstream provided configure script produces a broken
log4cpp-1.1.3/log4cpp/include/log4cpp/config.h file with its custom
AC_CREATE_PREFIX_CONFIG_H m4 macro. Running autoreconf fixes this
problem.

Fixes
http://autobuild.buildroot.net/results/9be23d91098d2f3724bb9535333fed8d27ef992a/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/stella: bump version to 5.0.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gnupg2: bump to version 2.2.0

Switch to https download for firewall compatibility and security.

As upstream now defaults to 'gpg' for the main binary name, keep the
'gpg2' name as in previous releases, to avoid conflict with the gnupg
package.

Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gnupg2: drop non-wchar toolchain workaround

gnupg2 removed gnulib in version 2.1.1. The workaround for non-wchar
toolchains introduced in commit 8a878870958 (gnupg2: fix build on
non-wchar toolchains), is no longer needed.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gnupg2: switch optional dependency to libusb

gnupg2 migrated to libusb-1.0 in version 2.1.12.

Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/sqlite: bump version to 3.20.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/sysdig: fix missing curlbuild include

curlbuild.h was removed in recent versinos of curl, backporting a
patch from mainline to fix it until a newer version of sysdig is
released.

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: linux-pam is needed for su

With linux-pam, the configure script bails out with:

configure: error: su selected, but required PAM header file not available

Fixes:
http://autobuild.buildroot.net/results/338/3381a49d17aa0d4b9711cbb36a5d7b563a8ae08f/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/linux-firmware: fix typo in license info for qla2xxx

https://git.buildroot.net/buildroot/commit/package/linux-firmware?id=91983091455e2b82432509c11f958409e7bbefcd
added support for ql2xxx adapters with the wrong filename for the
license file.

Fixes
http://autobuild.buildroot.net/results/58a/58a4112eb5ee1a3242ad17dd156f8abc977fb96c/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libcgi: add patch to not require C++ support

libcgi is written in C, there is no need for a C++ compiler, but CMake
by default assumes that both C and C++ are needed. To fix that, this
commit adds a patch, submitted upstream, to adjust the CMakeLists.txt.

Fixes:

  http://autobuild.buildroot.net/results/d0b4740bdbd84ed6fcbba706caf42ebba4c07d15/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: linux-pam is needed for runuser

With linux-pam, the configure script bails out with:

configure: error: runuser selected, but required PAM header file not available

Fixes:

  http://autobuild.buildroot.net/results/ea7430012f1d8e2ae3ceb8fe5d41630ea1eaa3af/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libepoxy: drop patch merged upstream

Following the merge of the "next" branch back into "master", the
libepoxy package fails to build, because its version was bumped in the
"next" branch and patches were backported in the "master" branch,
which are no longer needed since they are upstream as of version
1.4.3.

Fixes:

  http://autobuild.buildroot.net/results/5b77479c101dc43f92f23d3fd893d2df80697db0/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

glibmm: bump to version 2.52.0

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/xmlstarlet: fix host build

Provide the path to HOST_DIR for libxml, libxslt and libiconv like for
the target variant to avoid a build issue on host where /bin is a
symlink to /usr/bin.

Indeed, the configure script use a custom m4 macro XSTAR_LIB_CHECK to
find xml2-config:

XSTAR_LIB_CHECK([LIBXML], [xml2-config])

This macro come from a local m4 file m4/xstar-check-libs.m4 where it
use:

AC_PATH_PROG(LIBXXX()_CONFIG, xxx_config(),
               [], [$LIBXXX()_PREFIX/bin$PATH_SEPARATOR$PATH]

Since no prefix seems to be defined by $LIBXXX()_PREFIX, AC_PATH_PROG
look by itself at /bin/ for xml2-config. So the PATH variable set
by Buildroot containing HOST_DIR/bin is ignored.

The wrong xml2-config is used during the build and the build fail
when no xml2 headers are installed on the host.

Fixes:
src/xml_C14N.c:12:31: fatal error : libxml/xmlversion.h : No such file or directory
 #include <libxml/xmlversion.h>
                               ^
In file included from src/trans.c:4:0:
src/trans.h:32:30: fatal error : libxml/xmlmemory.h : No such file or directory
 #include <libxml/xmlmemory.h>

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: remove french messages from the commit log, drop
--with-libiconv-prefix option, since we don't have a libiconv
dependency for the host.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: bump cip version to v4.4.83-cip8

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/ts4900: bump kernel version to 4.12

ts4900 defconfig is upstream in Linux since v4.9:
       a2f1145 ARM: dts: TS-4900: add basic device tree

Bump kernel version to v4.12 and use the upstreamed defconfig
imx_v6_v7.

Signed-off-by: Mathieu Audat <mathieu.audat@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: add menu items for login utilities

This change extends to the login utilities the current policy of having
a selection item in the configuration menu for each utility that has an
--enable/--disable knob in the "configure" script:

- add selection items for login, runuser, su and sulogin (there was
  already an item for "last")
- move "login utilities" to Config.in.legacy
- make "login utilities" select last, login, runuser, su and sulogin

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 4.{4, 9}.x series

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xl2tp: drop OpenSSL dependency

xl2tp does not depend on OpenSSL since version 1.3.4.

Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wsapi-fcgi: new package

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas: add entry to DEVELOPERS file, add <pkg>_LICENSE = MIT]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wsapi-xavante: new package

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas: add to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xavante: bump to version 2.4.0

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

orbit: bump to version 2.2.4

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lua-stdlib: bump to version 41.2.1

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lua-resty-http: bump to version 0.11

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luaossl: bump to version 20170901

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luajson: bump to version 1.3.4

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dado: bump to version 1.8.3

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

coxpcall: bump to version 1.16.0

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

copas: bump to version 2.0.2

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cgilua: bump to version 5.2.1

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/galileo: add CONFIG_LBDAF=y in the kernel configuration

Kernel help-text states, "The ext4 filesystem requires that this feature
be enabled <...> otherwise, it will refuse to mount in the read-write
mode any filesystems that use the huge_file feature, which is enabled by
default by mke2fs.ext4."

If the rootfs is to be (re)mounted rw at boot, this must be set for the
system to successfully come up.

Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/fontconfig: bump version to 2.12.4

Removed patch applied upstream:
https://cgit.freedesktop.org/fontconfig/commit/?id=1ab5258f7c2abfafcd63a760ca08bf93591912da

We need to keep the host-gperf dependency even when upstream ships the
generated file fcobjshash.gperf in its release tarball because in the
next release this file is removed:
https://cgit.freedesktop.org/fontconfig/commit/?id=651f1227646174b5be0186b4b6cdff3a7134d869
and is always generated during build:
https://bugs.freedesktop.org/show_bug.cgi?id=101280

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/netatalk: bump version to 3.1.11

Building 3.1.9 still fails after removing patch 0002:

volume.c:383:26: error: 'ldap_config_valid' undeclared (first use in this function)
                     if (!ldap_config_valid || vol->v_flags & AFPVOL_NONETIDS)

Bumping to 3.1.11 solves the problem.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/netatalk: remove patch applied upstream

Link to upstream commit:
https://sourceforge.net/p/netatalk/code/ci/d48ecb55ac4c916cd78bbaf4de53a04abf6d47fb/

Fixes
http://autobuild.buildroot.net/results/0a7/0a7c94e074da5a4944f2046cd33fdcc51d3884e5/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Revert "package/fontconfig: bump version to 2.12.4"

This reverts commit 72e89edfcb9821121a2785ddf193a1d836ae0b8f. Due to
some change in fontconfig, it tries to re-generate a file using
gperf. Adding a dependency on host-gperf would solve the problem, but
really this is an upstream bug that should be reported and fixed
rather than worked around by adding the host-gperf dependency.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libpng: bump version to 1.6.32

Added md5 hash provided by upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/lzo: enable shared/static libs when needed

In 61c4c63 (package/lzo: switch to cmake), building lzo has switched
from autotools to cmake. In the conversion, we've lost the build of the
shared library, because the cmake-based buildsystem of lzo explcitly
disables it by default.

Restore the shared library build.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Kickoff 2017.11 cycle

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Merge branch 'next'

Update for 2017.08

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

transmission: correct gtk dependencies after NLS rework

With the recent NLS rework, BR2_ENABLE_NLS doesn't imply the absense of --disable-nls, so
configure may fail with:

configure: error: "The gtk client cannot be built without nls support.  Try adding either --enable-nls or --without-gtk"

So adjust the dependencies to use BR2_SYSTEM_ENABLE_NLS instead.

As mentioned by Arnout, an alternative solution could be to explicitly pass
--enable-nls as the stub functions are now available everywhere - But I went
with the dependency for consistency reasons.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

transmission: gtk option needs libgtk3

Fixes the following configure issue:

checking for GTK... no
configure: error: Package requirements (gtk+-3.0 >= 3.4.0
                              glib-2.0 >= 2.32.0
                              gio-2.0 >= 2.26.0,
                              gmodule-2.0 >= 2.32.0
                              gthread-2.0 >= 2.32.0) were not met:

libgtk2 support was dropped in commit cdd71c642724 ((trunk gtk) #4970 remove
deprecated GTK+ API calls, raise GTK+ dependency to 3.2) which was part of
transmission-2.61.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/transmission: fix gtk support

Gtk support is controlled by ARG_WITH since
https://github.com/transmission/transmission/commit/2ccc2bbbfe2e4a26dfeaa13b56c412ea0af4ebe4

Fixes a build error if libgtk2/3 was built before transmission:
http://autobuild.buildroot.net/results/6b6/6b6ce352a9edfe3aaba82be143092a878e7715ed/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: update with recent changes

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: minor tweaks to 2017.08-rcX notes

Mainly just whitespace.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc-ng-test: update to latest

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

modem-manager: update dependencies

These are the changes implemented:

  * Remove dbus-glib as a dependency, as it isn't required since
    ModemManager 1.0, which is based on libglib2's GDBus
    implementation.

  * Remove udev as a dependency, as the ModemManager build only needs
    the libgudev package.

  * Explicitly set libglib2 as dependency, which currently was being
    implicitly included by libgudev. The next major ModemManager
    release will have udev/libgudev as optional packages, while
    libglib2 is definitely not going to be ever optional.

  * Add a comment explaining that dbus is only a runtime dependency.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi-pvr-*: mass version bump

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi-inputstream-adaptive: bump version to latest Krypton release

Upstream does not depend on a fixed version anymore but uses the latest
commit of the Krypton branch:
https://github.com/xbmc/repo-binary-addons/commit/2f3dfcfa97249ab01808c79a88d5b3d33bf5d620

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi: bump to version 17.4

Removed patch 0003, applied upstream:
https://github.com/xbmc/xbmc/commit/5fa10ff6b1b60abee172296d9c1dec8dfc10615c

-DWITH_FFMPEG is needed due to commit
https://github.com/xbmc/xbmc/commit/5ba6eb7cadc41d5eb86ef94e3661b833b62953ff

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/terminology: bump to 1.1.0

See: https://sourceforge.net/p/enlightenment/mailman/message/36004555/

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/enlightenment: bump to 0.21.9

See: https://www.enlightenment.org/news/e0.21.9_release

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/efl: bump to 1.20.2

See: https://www.enlightenment.org/news/efl-1.20.2

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pdmenu: new package

Signed-off-by: Brock Williams <brock@cottonwoodcomputer.com>
[Thomas:
 - properly handle the NLS cases, by adding two patches
 - use sha256 locally calculated hash for the tarball, add hash for
   the license file
 - fix the license information: it's GPL-2.0 licensed, and the license
   file is doc/COPYING.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libftdi1: bump to version 1.4

Cc: Daniel Sangue <daniel.sangue@sangue.ch>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

CHANGES: start preparing for the final 2017.08

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/simicsfs: remove package

Buildroot currently packages version 1.18 of simics, which is quite
out of date, and does not compile with Linux 4.12+. The latest package
v1.22 supports recent kernels, however that is not publicly available
anymore like the older versions.

In fact Simics is now moving away from the simicsfs kernel module, as
the kernel module has required too much maintenance work. Users should
move to the new user mode Simics agent instead. Therefore, we drop the
corresponding package from Buildroot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opus-tools: bump version to 0.1.10

Switch upstream URL to https.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opusfile: bump version to 0.9

Switch upstream URL to https.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opus: bump version to 1.2.1

Switch upstream URL to https.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/{mesa3d, mesa3d-headers}: bump version to 17.1.8

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libtommath: bump to version 1.0.1

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openjpeg: bump version to 2.2.0

Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

poppler: bump version to 0.57.0

Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cups: bump version to 2.2.4

Tweak 0003-Sanitize-the-installation-process.patch for 2.2.4
Tweak 0004-Remove-PIE-flags-from-the-build.patch for 2.2.4
Remove 0005-Fix-static-linking-with-GnuTLS.patch as it was merged upstream

Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mtd: bump to version 2.0.1

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

grub2: force -fno-stack-protector in CFLAGS

grub2 fails to configure when BR2_SSP_ALL is enabled, with the following
configure error:

  checking whether -fno-asynchronous-unwind-tables works... yes
  checking whether -fno-unwind-tables works... yes
  checking for target linking format... unknown
  configure: error: no suitable link format found

This can be worked around by enforcing -fno-stack-protector in the
package CFLAGS in a way that overrides the SSP flag, as is already done
for the valgrind package.

Fixes bug #10261.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reported-by: Dr I J Ormshaw <ian_ormshaw@waters.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/linux-tools: gpio does not build in parallel

Partially fixes #10276.

Reported-by: Ciro Santilli <ciro.santilli@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ciro Santilli <ciro.santilli@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libgcrypt: security bump to version 1.7.9

Fixes CVE-2017-0379: Mitigate a local side-channel attack on Curve25519
dubbed "May the Fourth be With You".

As we are close to release, don't update to the latest 1.8.1 version,
but to a maintenance release from the 1.7 branch.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gnupg: security bump to version 1.4.22

Mitigate a flush+reload side-channel attack on RSA secret keys
dubbed "Sliding right into disaster".  For details see
<https://eprint.iacr.org/2017/627>.  [CVE-2017-7526]

Switch to https site for better firewall compatibility and security.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 4.{4, 9, 12}.x series

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: bump default to version 4.12.10

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

bcusdk: eibd: drop local clock_gettime in USB backends

clock_gettime is defined locally, and calls pth_int_time, which
in turn calls clock_gettime.
The USB backend shouldn't overrule clock_gettime in the first place.
This patch fixes this endless recursion by removing the local defition.

Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 3.{2, 10}.x series

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/squid: fix typo

Fixed typo added by
https://git.buildroot.net/buildroot/commit/package/squid?id=d2f7d0d72cd7e00ffbe869011d200f0a4a53e7a5

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libkcapi: fix build with gcc 7.x

Add an upstream patch to make libkcapi build with gcc 7.x.

Fixes:

  http://autobuild.buildroot.net/results/01f/01f207ccd1cf5fc030510cb7a4eb2649e124b49b/

Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain/buildroot: not available for a few mips cores

Commit 1b974425 (MIPS: add support for M6201 cores) explained that the
new core was not supported by upstream gcc, and as of gcc-8-trunk
that's still the case.

Ditto for 3cfbeb83 (MIPS: add support for P6600 cores).

This means that we currently allow to build an internal tolchain for
those cores, yet we have no suitable gcc version.

Disable the internal backend in this case.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

connman: security bump to version 1.35

Fixes CVE-2017-12865: stack overflow in dns proxy feature.

Cc: Martin Bark <martin@barkynet.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/vde2: fix build issue with gcc 7.x

Like for dieharder package [1], add static to inline functions.
https://git.buildroot.net/buildroot/commit/?id=21133ada326c87627f7bdee4493d8086587c3cca

Fixes:
http://autobuild.buildroot.net/results/ed9/ed9abb1aed2ae87971ae119f4bca83cbf9861466
http://autobuild.buildroot.net/results/2a1/2a1f73bfaf7097d42165d5c5f6c24d1aad72c929

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dnsmasq: fix build without NLS

dnsmasq i18n support requires NLS for the provided gettext utilities.
Locale support, OTOH, is not required.

Fixes:
http://autobuild.buildroot.net/results/d45/d453aff1ce1f5e1d380bd7692a4a0565505027a3/
http://autobuild.buildroot.net/results/fb7/fb7844a239472eb48c18778aa7d515552ccfb4b9/
http://autobuild.buildroot.net/results/d85/d856ec3e6b28bd723176bb892a56dff5262a6b92/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nvidia-driver: install an egl.pc

A lot of packages expect an egl.pc to decide that EGL is available. So,
provide one.

As suggested by Alexandre, use the one from nvidia-tegra23 as template.

Reported-by: Alexandre Maumené <alexandre@maumene.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Alexandre Maumené <alexandre@maumene.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libphidget: fix upstream source URL

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/iucode-tool: fix upstream source URL

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/iostat: fix upstream source URL

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/dialog: fix upstream source URL

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tslib: update to version 1.12

The release page has a short changelog overview:

    https://github.com/kergoth/tslib/releases/tag/1.12

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nss-pam-ldapd: Do not mark .service file executable

Do not mark .service file executable, otherwise systemd
will give us a warning about it.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/transmission: Do not mark .service file executable

Do not mark .service file executable, otherwise systemd
will give us a warning about it.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/minidlna: Do not mark .service file executable

Do not mark .service file executable, otherwise systemd
will give us a warning about it.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

modem-manager: bump to version 1.6.8

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/minidlna: bump version to 1.2.1

Switched _SITE to https.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS: adopt bcusdk

Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>