Tim Newsome [Tue, 20 Dec 2016 22:25:37 +0000 (14:25 -0800)]
Fix a const-safety issue on GCC-4.9 and above
* config/tc-riscv.c (riscv_pre_output_hook): Remove const from
loc4_frag.
Andrew Waterman [Tue, 20 Dec 2016 22:25:33 +0000 (14:25 -0800)]
Avoid creating symbol table entries for registers
Instructions like "jal t0, foo" were erroneously creating symbol table
entries for t0 as well as foo, which causes linking problems. Fix by
reordering instruction alternatives so that t0 is first attempted to
be parsed as a register, rather than as a symbol.
* riscv-opc.c (riscv_opcodes): Reorder jal and call entries.
Igor Kudrin [Wed, 21 Dec 2016 10:53:34 +0000 (21:23 +1030)]
Do not add padding if an output section is marked as ignored
* ldlang.c (size_input_section): Avoid calling insert_pad
if output_section_statement->ignored is set.
Yury Norov [Fri, 9 Dec 2016 16:17:58 +0000 (21:47 +0530)]
bfd: aarch64: fix word and arrdess size declaration in ilp32 mode
ILP32 has 32-bit word and address, but currently they declared as 64-bit in
bfd_aarch64_arch_ilp32, which breaks further logic of bfd. This patch fixes it.
Glibc testsuite build with patched binutils shows that next tests stop to fail:
iconvdata/mtrace-tst-loading
iconvdata/tst-loading
iconvdata/tst-tables
localedata/mtrace-tst-leaks
localedata/tst-leaks
posix/tst-getaddrinfo4
posix/tst-getaddrinfo5
posix/tst-regex2
Alan Modra [Wed, 21 Dec 2016 08:43:52 +0000 (19:13 +1030)]
Remove high bit set characters
gas/
* doc/c-lm32.texi: Fix chars with high bit set.
* testsuite/gas/bfin/vector2.s: Likewise.
gold/
* arm.cc: Fix comment chars with high bit set.
include/
* coff/pe.h: Fix comment chars with high bit set.
* opcode/xgate.h: Likewise.
ld/
* testsuite/ld-scripts/sysroot-prefix.exp: Fix chars with high bit set.
Alan Modra [Wed, 21 Dec 2016 08:37:55 +0000 (19:07 +1030)]
Document character escape sequences
PR gas/10946
* doc/as.texinfo (Chars): Document escape sequences.
GDB Administrator [Wed, 21 Dec 2016 00:00:25 +0000 (00:00 +0000)]
Automatic date update in version.in
Pedro Alves [Tue, 20 Dec 2016 17:07:19 +0000 (17:07 +0000)]
gdb: Constify solib_find
gdb/ChangeLog:
2016-12-20 Pedro Alves <palves@redhat.com>
* nto-tdep.c (nto_find_and_open_solib): Constify 'solib'
parameter.
* nto-tdep.h (nto_find_and_open_solib): Constify 'solib'
parameter.
* solib.c (solib_find_1, exec_file_find, solib_find): Constify
in_pathname' parameter.
* solist.h (struct target_so_ops) <find_and_open_solib>: Constify
'soname' parameter.
(exec_file_find, solib_find): Constify 'in_pathname' parameter.
Pedro Alves [Tue, 20 Dec 2016 15:46:44 +0000 (15:46 +0000)]
Fix longjmp across readline w/ --enable-sjlj-exceptions toolchains
Nowadays, GDB propagates C++ exceptions across readline using
setjmp/longjmp
89525768cd08 ("Propagate GDB/C++ exceptions across
readline using sj/lj-based TRY/CATCH") because DWARF-based unwinding
can't cross C functions compiled without -fexceptions (see details
from the commit above).
Unfortunately, toolchains that use SjLj-based C++ exceptions got
broken with that fix, because _Unwind_SjLj_Unregister, which is put at
the exit of a function, is not executed due to the longjmp added by
that commit.
(gdb) [New Thread 2936.0xb80]
kill
Thread 1 received signal SIGSEGV, Segmentation fault.
0x03ff662b in ?? ()
top?bt 15
#0 0x03ff662b in ?? ()
#1 0x00526b92 in stdin_event_handler (error=0, client_data=0x172ed8)
at ../../binutils-gdb/gdb/event-top.c:555
#2 0x00525a94 in handle_file_event (ready_mask=<optimized out>,
file_ptr=0x3ff5cb8) at ../../binutils-gdb/gdb/event-loop.c:733
#3 gdb_wait_for_event (block=block@entry=1)
at ../../binutils-gdb/gdb/event-loop.c:884
#4 0x00525bfb in gdb_do_one_event ()
at ../../binutils-gdb/gdb/event-loop.c:347
#5 0x00525ce5 in start_event_loop ()
at ../../binutils-gdb/gdb/event-loop.c:371
#6 0x0051fada in captured_command_loop (data=0x0)
at ../../binutils-gdb/gdb/main.c:324
#7 0x0051cf5d in catch_errors (
func=func@entry=0x51fab0 <captured_command_loop(void*)>,
func_args=func_args@entry=0x0,
errstring=errstring@entry=0x7922bf <VEC_interp_factory_p_quick_push(VEC_inte rp_factory_p*, interp_factory*, char const*, unsigned int)::__PRETTY_FUNCTION__+351> "", mask=mask@entry=RETURN_MASK_ALL)
at ../../binutils-gdb/gdb/exceptions.c:236
#8 0x00520f0c in captured_main (data=0x328feb4)
at ../../binutils-gdb/gdb/main.c:1149
#9 gdb_main (args=args@entry=0x328feb4) at ../../binutils-gdb/gdb/main.c:1159
#10 0x0071e400 in main (argc=1, argv=0x171220)
at ../../binutils-gdb/gdb/gdb.c:32
Fix this by making the functions involved in setjmp/longjmp as
noexcept, so that the compiler knows it doesn't need to emit the
_Unwind_SjLj_Register / _Unwind_SjLj_Unregister calls for C++
exceptions.
Tested on x86_64 Fedora 23 with:
- GCC 5.3.1 w/ DWARF-based exceptions.
- GCC 7 built with --enable-sjlj-exceptions.
gdb/ChangeLog:
2016-12-20 Pedro Alves <palves@redhat.com>
Yao Qi <yao.qi@linaro.org>
PR gdb/20977
* event-top.c (gdb_rl_callback_read_char_wrapper_noexcept): New
noexcept function, factored out from ...
(gdb_rl_callback_read_char_wrapper): ... this.
(gdb_rl_callback_handler): Mark noexcept.
Antoine Tremblay [Tue, 20 Dec 2016 13:42:10 +0000 (08:42 -0500)]
Set emacs default mode for the GDB directory to C++
Since GDB has switched to C++ but the file names are still .c emacs does
not load the proper mode when opening files in the gdb directory.
This patch fixes that by enabling c++ mode.
This patch also fixes indentation tweaks as discussed in this thread:
https://sourceware.org/ml/gdb-patches/2016-12/msg00074.html
Indent with gdb-code-style.el included and the .dir-locals.el is as such:
namespace TestNameSpace {
class test
{
public:
test test() {}
int m_a;
};
struct teststruct
{
int a;
}
}
gdb/ChangeLog:
* .dir-locals.el: Set c++ mode for the directory and set indent
properly.
* gdb-code-style.el: Set c-set-offset 'innamespace as a safe value
to be used in .dir-locals.el.
Maciej W. Rozycki [Tue, 20 Dec 2016 11:38:53 +0000 (11:38 +0000)]
MIPS16/opcodes: Respect ISA and ASE in disassembly
Limit MIPS16 instruction disassembly according to the ISA level and ASE
set selected, as with the regular MIPS and microMIPS instruction sets.
Retain the property of `objdump -m mips:16' disassembling all MIPS16
instructions however, regardless of any ISA level recorded in the binary
examined.
To validate the disassembler use the GAS test suite for its convenience
of running tests across multiple ISAs, even though placing the tests in
the binutils test suite would be more appropriate. Adjust the single
binutils test which depends on 64-bit instruction disassembly to have
the ISA level required actually recorded in the binary examined.
opcodes/
* mips-dis.c (mips_arch_choices): Use ISA_MIPS64 rather than
ISA_MIPS3 as the `isa' selection in the `bfd_mach_mips16' entry.
(print_insn_mips16): Check opcode entries for validity against
the ISA level and ASE set selected.
binutils/
* testsuite/binutils-all/mips/mips16-undecoded.s: Use `.module'
rather than `.set' to set the ISA level.
gas/
* testsuite/gas/mips/mips16-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16-sub.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-sub.d: New test.
* testsuite/gas/mips/mips16e-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16e-sub.d: New test.
* testsuite/gas/mips/mips16-64@mips16e-sub.d: New test.
* testsuite/gas/mips/mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-64@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16e-32@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-sub.s: New test source.
* testsuite/gas/mips/mips16e-sub.s: New test source.
* testsuite/gas/mips/mips16e-64-sub.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Maciej W. Rozycki [Tue, 20 Dec 2016 11:34:47 +0000 (11:34 +0000)]
MIPS/GAS/testsuite: Add RESTORE instruction to `mips16e' test
Add a RESTORE instruction smoke test to the `mips16e' GAS test.
gas/
* testsuite/gas/mips/mips16e.s: Add a RESTORE instruction.
* testsuite/gas/mips/mips16e.d: Adjust accordingly.
Maciej W. Rozycki [Tue, 20 Dec 2016 11:33:49 +0000 (11:33 +0000)]
MIPS/GAS/testsuite: Extend MIPS16 testing over multiple ISAs
Run the `mips16', `mips16-64', `mips16e-64', `mips16-macro',
`mips16-macro-e' and `mips16-macro-t' GAS tests over multiple MIPS16
ISAs.
gas/
* testsuite/gas/mips/mips16.d: Adjust test for multiple MIPS16
ISA testing.
* testsuite/gas/mips/mips16-64.d: Adjust test for multiple
MIPS16 ISA testing.
* testsuite/gas/mips/mips16e-64.d: Adjust test for multiple
MIPS16 ISA testing.
* testsuite/gas/mips/mips16-macro.d: Adjust test for multiple
MIPS16 ISA testing.
* testsuite/gas/mips/mips16e-64.s: Ensure MIPS16 ISA annotation.
* testsuite/gas/mips/mips16e-64.l: Rename to...
* testsuite/gas/mips/mips16e-32@mips16e-64.l: ... this.
* testsuite/gas/mips/mips16-64@mips16.d: New test.
* testsuite/gas/mips/mips16-64@mips16-64.d: New test.
* testsuite/gas/mips/mips16e-32@mips16e-64.d: New test.
* testsuite/gas/mips/mips16-32@mips16-macro.d: New test.
* testsuite/gas/mips/mips16-64@mips16-macro.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-macro.d: New test.
* testsuite/gas/mips/mips16-32@mips16-macro-e.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-macro-e.d: New test.
* testsuite/gas/mips/mips16-32@mips16-macro-t.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-macro-t.d: New test.
* testsuite/gas/mips/mips16e-32@mips16e-64.l: New stderr output.
* testsuite/gas/mips/mips16-32@mips16-macro.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-macro.l: New stderr
output.
* testsuite/gas/mips/mips16-32@mips16-macro-e.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-macro-e.l: New stderr
output.
* testsuite/gas/mips/mips16-32@mips16-macro-t.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-macro-t.l: New stderr
output.
* testsuite/gas/mips/mips.exp: Run `mips16', `mips16-64',
`mips16-macro', `mips16-macro-t', `mips16-macro-e' and
`mips16e-64' testing across multiple MIPS16 ISAs. Fold
`mips16-macro' and `mips16e-64' list test invocations into
corresponding dump tests.
Maciej W. Rozycki [Tue, 20 Dec 2016 02:23:51 +0000 (02:23 +0000)]
MIPS/GAS/testsuite: Implement individual MIPS16 ISA testing
Implement individual MIPS16 ISA GAS testing for the 32-bit and 64-bit
variants of the base MIPS16 and the MIPS16e ISA each.
gas/
* testsuite/gas/mips/mips.exp (run_dump_test_arch): Add
`mips16e' and `mips16' prefixes.
(run_list_test_arch): Likewise.
Rename `mips16' architecture to `mips16-32'. Add `mips16-64',
`mips16e-32' and `mips16e-64' architectures. Update `rol64',
`mips16e', `elf${el}-rel2' and `elf-rel4' test invocations
accordingly.
* testsuite/gas/mips/mips16e@branch-swap-3.d: New test.
* testsuite/gas/mips/mips16e@branch-swap-4.d: New test.
* testsuite/gas/mips/mips16e@loc-swap-dis.d: New test.
* testsuite/gas/mips/mips16e@loc-swap.d: New test.
Maciej W. Rozycki [Tue, 20 Dec 2016 02:10:40 +0000 (02:10 +0000)]
MIPS/GAS/testsuite: Fix trailing padding in `loc-swap.s'
Pad alignment with zeros rather than NOP instructions, for sensible
multi-ISA MIPS16 testing.
gas/
* testsuite/gas/mips/loc-swap.s: Use zeros rather than NOPs for
trailing alignment padding.
* testsuite/gas/mips/loc-swap.d: Adjust accordingly.
* testsuite/gas/mips/micromips@loc-swap.d: Likewise.
* testsuite/gas/mips/mips16@loc-swap-dis.d: Likewise.
Maciej W. Rozycki [Tue, 20 Dec 2016 02:03:40 +0000 (02:03 +0000)]
MIPS16: Switch to 32-bit opcode table interpretation
Switch to 32-bit MIPS16 opcode table entry interpretation, similar to
how the microMIPS opcode table is handled, for both the `match' and
`mask' fields, removing special casing for JAL and JALX instructions and
their `a' and `i' operand codes throughout, while retaining automatic
processing of extendable opcodes in assembly and disassembly.
In assembly disallow size enforcement suffixes as appropriate: `.t' for
both 32-bit instructions and macros and `.e' for macros only, making
macro handling consistent with the microMIPS instruction set.
In disassembly fully decode EXTEND prefixes prepended to unsupported
instruction encodings (according to the ISA selection) rather than
dumping them as hexadecimal data along with the following instruction,
removing all special casing for the EXTEND prefix and making its
handling rely on its opcode table entry, except where it is considered a
part of an extendable instruction.
include/
* opcode/mips.h (mips_opcode_32bit_p): New inline function.
gas/
* config/tc-mips.c (micromips_insn_length): Use
`mips_opcode_32bit_p'.
(is_size_valid): Adjust description.
(is_size_valid_16): New function.
(validate_mips_insn): Use `mips_opcode_32bit_p' in MIPS16
operand decoding.
(validate_mips16_insn): Remove `a' and `i' operand code special
casing, use `mips_opcode_32bit_p' to determine instruction
width.
(append_insn): Adjust forced MIPS16 instruction size
determination.
(match_mips16_insn): Likewise. Don't shift the instruction's
opcode with the `a' and `i' operand codes. Use
`mips_opcode_32bit_p' in operand decoding.
(match_mips16_insns): Check for forced instruction size's
validity.
(mips16_ip): Don't force instruction size in the `noautoextend'
mode.
* testsuite/gas/mips/mips16-jal-e.d: New test.
* testsuite/gas/mips/mips16-jal-t.d: New test.
* testsuite/gas/mips/mips16-macro-e.d: New test.
* testsuite/gas/mips/mips16-macro-t.d: New test.
* testsuite/gas/mips/mips16-jal-t.l: New stderr output.
* testsuite/gas/mips/mips16-macro-e.l: New stderr output.
* testsuite/gas/mips/mips16-macro-t.l: New stderr output.
* testsuite/gas/mips/mips16-jal-e.s: New test source.
* testsuite/gas/mips/mips16-jal-t.s: New test source.
* testsuite/gas/mips/mips16-macro-e.s: New test source.
* testsuite/gas/mips/mips16-macro-t.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Always handle `extend' and
`insn' together, with `extend' as the high-order 16 bits.
(match_kind): New enum.
(print_insn_mips16): Rework for 32-bit instruction matching.
Do not dump EXTEND prefixes here.
* mips16-opc.c (mips16_opcodes): Move "extend" entry to the end.
Recode `match' and `mask' fields as 32-bit in absolute "jal" and
"jalx" entries.
binutils/
* testsuite/binutils-all/mips/mips16-extend-noinsn.d: Adjust
test for separate EXTEND prefix disassembly.
Maciej W. Rozycki [Tue, 20 Dec 2016 01:53:03 +0000 (01:53 +0000)]
MIPS16/opcodes: Correct 64-bit macros' ISA membership
Limit the DDIV, DDIVU, DREM, DREMU and DSUBU macros to the MIPS III
rather than MIPS I ISA. These macros expand to machine code sequences
including 64-bit instructions which require a 64-bit ISA. Entries for
those instructions are already correctly marked, however the marking is
ignored if entries are used in the process of macro expansion rather
than directly, making it possible to indirectly produce 64-bit machine
code even when output requested has been limited to a 32-bit ISA.
opcodes/
* mips16-opc.c (mips16_opcodes): Set membership to I3 rather
than I1 for the "ddiv", "ddivu", "drem", "dremu" and "dsubu"
INSN_MACRO entries.
gas/
* testsuite/gas/mips/mips16-macro.l: New list test.
* testsuite/gas/mips/mips.exp: Run the new test.
Maciej W. Rozycki [Tue, 20 Dec 2016 01:50:24 +0000 (01:50 +0000)]
MIPS16/opcodes: Correct I64/SDRASP opcode's ISA membership
Limit the `SD ra, offset(sp)' instruction (I64/SDRASP major/minor
opcode) to the MIPS III rather than MIPS I ISA. This is a 64-bit
instruction requiring a 64-bit ISA. This bug has been there since
forever.
opcodes/
* mips16-opc.c (mips16_opcodes): Set membership to I3 rather
than I1 for the SP-relative "sd"/$ra entry (SDRASP minor
opcode).
gas/
* testsuite/gas/mips/mips16-sdrasp.d: New test.
* testsuite/gas/mips/mips16-sdrasp.l: New stderr output.
* testsuite/gas/mips/mips16-sdrasp.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
Maciej W. Rozycki [Tue, 20 Dec 2016 01:49:02 +0000 (01:49 +0000)]
MIPS/GAS/testsuite: Correct NewABI test selection
Make sure all tests that require NewABI support are only run with
`has_newabi' targets, removing numerous `mips-sgi-irix5' failures.
gas/
* testsuite/gas/mips/mips.exp: Limit remaining tests that
require NewABI support to `has_newabi' targets.
Cary Coutant [Tue, 20 Dec 2016 09:03:55 +0000 (01:03 -0800)]
Update testsuite Makefile with missing dependencies.
2016-12-20 Cary Coutant <ccoutant@gmail.com>
gold/
* testsuite/Makefile.am: Add missing dependencies on gcctestdir/ld
or ../ld-new.
* testsuite/Makefile.in: Regenerate.
Cary Coutant [Tue, 20 Dec 2016 03:19:46 +0000 (19:19 -0800)]
Fix read-beyond-end-of-buffer error in script parsing.
2016-12-19 Cary Coutant <ccoutant@gmail.com>
gold/
PR gold/20949
* script.cc (Lex::get_token): Don't look ahead past NUL characters.
Andrew Waterman [Mon, 19 Dec 2016 06:53:54 +0000 (22:53 -0800)]
Correct assembler mnemonic for RISC-V aqrl AMOs
sc is a misnomer, because they aren't inherently sc.
* riscv-opc.c (riscv_opcodes): Rename the "*.sc" instructions to
"*.aqrl".
Andrew Waterman [Mon, 19 Dec 2016 06:53:53 +0000 (22:53 -0800)]
Fix disassembly of RISC-V CSR instructions under -Mno-aliases
This fixes https://github.com/riscv/riscv-binutils-gdb/issues/36.
* riscv-opc.c (riscv_opcodes): Mark the rd* and csr* aliases as
INSN_ALIAS.
Andrew Waterman [Mon, 19 Dec 2016 06:53:52 +0000 (22:53 -0800)]
Add canonical JALR for RISC-V
jalr rd,offset(rs1)
rather than
jalr rd,rs1,offset
This matches the format of other instructions.
* riscv-opc.c (riscv_opcodes): Change jr and jalr to "o(s)"
format.
Andrew Waterman [Mon, 19 Dec 2016 06:53:51 +0000 (22:53 -0800)]
Don't define RISC-V .p2align
* config/tc-riscv.c (riscv_pseudo_table): Remove "align",
"p2align", and "balign".
(s_align): Remove.
(riscv_handle_align): New function.
(riscv_frag_align_code): Likewise.
(riscv_make_nops): Likewise.
* config/tc-riscv.h (MAX_MEM_FOR_RS_ALIGN_CODE): Change to 7.
(HANDLE_ALIGN): Define.
(md_do_align): Define.
(riscv_handle_align): Declare.
(riscv_frag_align_code): Likewise.
Andrew Waterman [Mon, 19 Dec 2016 06:53:50 +0000 (22:53 -0800)]
Re-work RISC-V gas flags: now we just support -mabi and -march
We've decided to standardize on two flags for RISC-V: "-march" sets the
target architecture (which determines which instructions can be
generated), and "-mabi" sets the target ABI. We needed to rework this
because the old flag set didn't support soft-float or single-float ABIs,
and didn't support an x32-style ABI on RISC-V.
Additionally, we've changed the behavior of the -march flag: it's now a
lot stricter and only parses things we can actually understand.
Additionally, it's now lowercase-only: the rationale is that while the
RISC-V ISA manual specifies that ISA strings are case-insensitive, in
Linux-land things are usually case-sensitive. Since this flag can be
used to determine library paths, we didn't want to bake some
case-insensitivity in there that would case trouble later.
This patch implements these two new flags and removes the old flags that
could conflict with these. There wasn't a RISC-V release before, so we
want to just support a clean flag set.
include/
* elf/riscv.h (EF_RISCV_SOFT_FLOAT): Don't define.
(EF_RISCV_FLOAT_ABI, EF_RISCV_FLOAT_ABI_SOFT): Define.
(EF_RISCV_FLOAT_ABI_SINGLE, EF_RISCV_FLOAT_ABI_DOUBLE): Define.
(EF_RISCV_FLOAT_ABI_QUAD): Define.
bfd/
* elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Use
EF_RISCV_FLOAT_ABI_SOFT instead of EF_RISCV_SOFT_FLOAT.
binutils/
* readelf.c (get_machine_flags): Use
EF_RISCV_FLOAT_ABI_{SOFT,SINGLE,DOBULE,QUAD) instead of
EF_RISCV_{SOFT,HARD}_FLOAT.
gas/
* config/tc-riscv.h (xlen): Delete.
* config/tc-riscv.c (xlen): Make static.
(abi_xlen): New variable.
(options): Replace OPTION_{M32,M64,MSOFT_FLOAT,MHARD_FLOAT,MRVC}
with OPTION_MABI.
(md_longopts): Likewise.
(md_parse_option): Likewise.
(riscv_elf_final_processing): Likewise.
* doc/as.texinfo (Target RISC-V options): Likewise.
* doc/c-riscv.texi (OPTIONS): Likewise.
* config/tc-riscv.c (float_mode): Removed.
(float_abi): New type, specifies the floating-point ABI.
(riscv_set_abi): New function.
(riscv_add_subset): Only allow lower-case ISA names and require
them to start with "rv".
(riscv_after_parse_args): Likewise.
opcodes/
* riscv-dis.c (riscv_disassemble_insn): Default to the ELF's
XLEN when none is provided.
Andrew Waterman [Mon, 19 Dec 2016 06:53:49 +0000 (22:53 -0800)]
Fix an integer overflow in RISC-V relocation handling
* elfnn-riscv.c (bfd_riscv_get_max_alignment): Return bfd_vma
instead of unsigned int.
Andrew Waterman [Mon, 19 Dec 2016 06:53:48 +0000 (22:53 -0800)]
Rework RISC-V relocations
Before this commit we didn't cleanly support CFI directives because the
internal offsets used to get relaxed which broke them. This patch
significantly reworks how we handle linker relaxations:
* DWARF is now properly supported
* There is a ".option norelax" to disable relaxations, for when users
write assembly that can't be relaxed (if it's to be later patched up,
for example).
* There is an additional _RELAX relocation that specifies when previous
relocations can be relaxed.
We're in the process of documenting the RISC-V ELF ABI, which will
include documentation of our relocations
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md
but we expect that this relocation set will remain ABI compatible in the
future (ie, it's safe to release).
Thanks to Kuan-Lin Chen for figuring out how to correctly relax the
debug info!
include/
* elf/riscv.h: Add R_RISCV_TPREL_I through R_RISCV_SET32.
bfd/
* reloc.c (BFD_RELOC_RISCV_TPREL_I): New relocation.
(BFD_RELOC_RISCV_TPREL_S): Likewise.
(BFD_RELOC_RISCV_RELAX): Likewise.
(BFD_RELOC_RISCV_CFA): Likewise.
(BFD_RELOC_RISCV_SUB6): Likewise.
(BFD_RELOC_RISCV_SET8): Likewise.
(BFD_RELOC_RISCV_SET8): Likewise.
(BFD_RELOC_RISCV_SET16): Likewise.
(BFD_RELOC_RISCV_SET32): Likewise.
* elfnn-riscv.c (perform_relocation): Handle the new
relocations.
(_bfd_riscv_relax_tls_le): Likewise.
(_bfd_riscv_relax_align): Likewise.
(_bfd_riscv_relax_section): Likewise.
(howto_table): Likewise.
(riscv_reloc_map): Likewise.
(relax_func_t): New type.
(_bfd_riscv_relax_call): Add reserve_size argument, which
controls the maximal offset pessimism. Correct type of max_alignment.
(_bfd_riscv_relax_lui): Likewise.
(_bfd_riscv_relax_tls_le): Likewise.
(_bfd_riscv_relax_align): Likewise.
(_bfd_riscv_relax_section): Compute the required reserve size
when relocating and use it to when calling relax_func.
* bfd-in2.h: Regenerate.
* libbfd.h: Likewise.
gas/
* config/tc-riscv.c (riscv_set_options): Add relax.
(riscv_opts): Likewise.
(s_riscv_option): Add relax and norelax.
(riscv_apply_const_reloc): New function.
(append_insn): Move constant relocation handling to
riscv_apply_const_reloc.
(md_pcrel_from): Likewise.
(parse_relocation): Skip BFD_RELOC_UNUSED.
(md_pcrel_from): Handle BFD_RELOC_RISCV_SUB6,
BFD_RELOC_RISCV_RELAX, BFD_RELOC_RISCV_CFA.
(md_apply_fix): Likewise.
(riscv_pre_output_hook): New function.
* config/tc-riscv.h (md_pre_output_hook): Define.
(riscv_pre_output_hook): Declare.
(DWARF_CIE_DATA_ALIGNMENT): Always -4.
Andrew Waterman [Mon, 19 Dec 2016 06:53:47 +0000 (22:53 -0800)]
Formatting changes for RISC-V
This is a mixed bag of format changes:
* Replacing constants with macros (0xffffffff with MINUS_ONE, for
example). There's one technically functional change in here (some
MINUS_ONEs are changed to 0), but it only changes the behavior of an
otherwise-unused field.
* Using 0 instead of 0x0 in the relocation table.
* There were some missing spaces before parens, the spaces have been
added.
* A handful of comments are now more descriptive.
* A bunch of whitespace-only changes, mostly alignment and brace
newlines.
bfd/
* elfnn-riscv.c: Formatting and comment fixes throughout.
* elfxx-riscv.c: Likewise.
(howto_table): Change the src_mask field from MINUS_ONE to 0 for
R_RISCV_TLS_DTPMOD32, R_RISCV_TLS_DTPMOD64, R_RISCV_TLS_DTPREL32,
R_RISCV_TLS_DTPREL64, R_RISCV_TLS_TPREL32, R_RISCV_TLS_TPREL64.
opcodes/
* riscv-opc.c: Formatting fixes.
gas/
* config/tc-riscv.c: Formatting and comment fixes throughout.
Palmer Dabbelt [Mon, 19 Dec 2016 06:53:46 +0000 (22:53 -0800)]
Improve RISC-V LD error message
I recently ran into this error message and found it's not helpful: it
just tells me some temporary file can't be linked. This slightly
improved one at least tells me it's because of an elf32/elf64 conflict.
* elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Improve
error message when linking elf32 and elf64.
Alan Modra [Tue, 20 Dec 2016 01:18:21 +0000 (11:48 +1030)]
Add opcodes RISC-V dependencies
* Makefile.am (TARGET_LIBOPCODES_CFILES): Add riscv files.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
Cary Coutant [Tue, 20 Dec 2016 00:37:48 +0000 (16:37 -0800)]
Fix problem where linker does not place .note sections according to script.
gold/
PR gold/14676
PR gold/20983
* layout.h (Layout::choose_output_section): Add match_input_spec
parameter. Adjust all callers.
* layout.cc (Layout::choose_output_section): Likewise. Pass
match_input_spec to Script_sections::output_section_name().
(Layout::create_note): Pass true for match_input_spec.
* script-sections.h (Script_sections::output_section_name): Add
match_input_spec parameter.
* script-sections.cc (Sections_element::output_section_name): Likewise.
(Output_section_definition::output_section_name): Likewise.
(Script_sections::output_section_name): Likewise.
GDB Administrator [Tue, 20 Dec 2016 00:00:32 +0000 (00:00 +0000)]
Automatic date update in version.in
Igor Kudrin [Mon, 19 Dec 2016 23:23:59 +0000 (15:23 -0800)]
Fix an internal error in the constructor of Target_arm.
gold/
* arm.cc (Target_arm::Target_arm): Move initialization code ...
(Target_arm::do_select_as_default_target): ... to here.
* testsuite/Makefile.am (arm_target_lazy_init): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/arm_target_lazy_init.s: New source file.
* testsuite/arm_target_lazy_init.t: New linker script.
Cary Coutant [Mon, 19 Dec 2016 18:37:23 +0000 (10:37 -0800)]
Fix forced allocation of common (-d) during -r links.
If the .bss section has other data in it besides common allocations,
gold was subtracting the wrong section start address from the symbol
value.
gold/
PR gold/20976
* symtab.cc (Symbol_table::sized_write_globals): Use address of
output section, not input section.
* testsuite/Makefile.am (pr20976): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/pr20976.c: New source file.
Yao Qi [Mon, 19 Dec 2016 15:00:32 +0000 (15:00 +0000)]
Clean up gdb.gdb/selftest.exp
I recently see the test fails like this,
(gdb) PASS: gdb.gdb/selftest.exp: step over argv initialization
list^M
487 std::vector<struct cmdarg> cmdarg_vec;^M
(gdb) FAIL: gdb.gdb/selftest.exp: unknown source line (after step over argv initialization)
step^M
std::vector<cmdarg, std::allocator<cmdarg> >::vector (this=0x7fffffffdc10) at ../../binutils-gdb/gdb/main.c:487^M
487 std::vector<struct cmdarg> cmdarg_vec;^M
(gdb) FAIL: gdb.gdb/selftest.exp: step into xmalloc call
These fails are caused by using std::vector in commit
f60ee22ea1d62f7004511ec65a3ad76890032d88. selttest.exp should match
the source code of GDB. It is a maintenance pain, so this patch
removes do_steps_and_nexts.
gdb/testsuite:
2016-12-19 Yao Qi <yao.qi@linaro.org>
* gdb.gdb/selftest.exp (do_steps_and_nexts): Remove.
(test_with_self): Don't call do_steps_and_nexts, and remove
code about stepping into xmalloc.
Christian Groessler [Mon, 19 Dec 2016 12:56:22 +0000 (13:56 +0100)]
bfd/elf32-arm.c: Rename 'popcount' to 'elf32_arm_popcount'
bfd/elf32_arm.c contains a function 'popcount' which conflicts
with a function of the same name in NetBSD's libc.
This change also changes popcount's 'sum' variable to signed
since the function returns a signed integer.
bfd/
* elf32-arm.c (elf32_arm_popcount): Rename from 'popcount'. Make
'sum' local variable signed.
Maciej W. Rozycki [Mon, 19 Dec 2016 11:35:14 +0000 (11:35 +0000)]
MIPS/opcodes: Only examine ELF file structures if SYMTAB_AVAILABLE
Correct commit
640c0ccdc980 ("some objdump -M options, better reg
dumps"), <https://sourceware.org/ml/binutils/2002-12/msg00706.html>, and
only execute code setting up disassembler options based on ELF file
structures if SYMTAB_AVAILABLE is set.
opcodes/
* mips-dis.c (set_default_mips_dis_options) [SYMTAB_AVAILABLE]:
Only examine ELF file structures here.
Maciej W. Rozycki [Mon, 19 Dec 2016 11:32:05 +0000 (11:32 +0000)]
MIPS/opcodes: Only call `bfd_mips_elf_get_abiflags' if BFD64
Complement commit
5e7fc731f80e ("MIPS/opcodes: Also set disassembler's
ASE flags from ELF structures") and fix an `--enable-targets=all' GDB
build regression on 32-bit hosts where the MIPS target is a secondary:
../opcodes/libopcodes.a(mips-dis.o): In function `set_default_mips_dis_options':
mips-dis.c:(.text+0x906): undefined reference to `bfd_mips_elf_get_abiflags'
collect2: error: ld returned 1 exit status
make[2]: *** [gdb] Error 1
by avoiding making a call to the `bfd_mips_elf_get_abiflags' function,
which is not available, because there is no MIPS/ELF BFD included in
32-bit BFD builds. This call is only made from a conditional code block
guarded by a check against `bfd_target_elf_flavour', which is dead in
such a configuration, however cannot be optimized away by the compiler.
Also some other MIPS BFDs may be available, such as a.out, ECOFF or PE,
so the disassembler has to remain functional.
opcodes/
* mips-dis.c (set_default_mips_dis_options) [BFD64]: Only call
`bfd_mips_elf_get_abiflags' here.
GDB Administrator [Mon, 19 Dec 2016 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sun, 18 Dec 2016 00:00:24 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sat, 17 Dec 2016 00:00:25 +0000 (00:00 +0000)]
Automatic date update in version.in
Bernhard Heckel [Thu, 15 Dec 2016 13:04:11 +0000 (14:04 +0100)]
Darwin: Fix gdb compilation.
Due to changes introduced by
commit
4d01a485d29732b19743e8b138897f3509e071b0
('struct expression *' -> gdb::unique_xmalloc_ptr<expression>)
compilation is broken on Darwin.
../gdb/darwin-nat-info.c:733:8: error: assigning to 'struct expression *'
from incompatible type
'expression_up' (aka 'std::__1::unique_ptr<expression, gdb::xfree_deleter<expression> >')
expr = parse_expression (exp);
Beside compilation, memory leak was solved as 'make_clean_up' was not called in previous
version.
2016-12-16 Bernhard Heckel <bernhard.heckel@intel.com>
gdb/Changelog:
* darwin-nat-info.c (info_mach_region_command): Use expression_up.
Nick Clifton [Fri, 16 Dec 2016 10:59:36 +0000 (10:59 +0000)]
Fix compile time warning building arm-dis.c
fincs [Fri, 16 Dec 2016 03:12:02 +0000 (13:42 +1030)]
Implement and document --gc-keep-exported
include/
* bfdlink.h (struct bfd_link_info): Add gc_keep_exported.
bfd/
* elflink.c (bfd_elf_gc_mark_dynamic_ref_symbol): Add handling
for info->gc_keep_exported.
(bfd_elf_gc_sections): Likewise.
ld/
* ld.texinfo: Document --gc-keep-exported.
* ldlex.h (enum option_values): Add OPTION_GC_KEEP_EXPORTED.
* lexsup.c (parse_args): Add handling for --gc-keep-exported.
GDB Administrator [Fri, 16 Dec 2016 00:00:26 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Thu, 15 Dec 2016 10:59:44 +0000 (21:29 +1030)]
Linking non-ELF file broken by PR20908 fix
PR ld/20968
PR ld/20908
* elflink.c (bfd_elf_final_link): Revert 2016-12-02 change. Move
reloc counting code later after ELF flavour test.
GDB Administrator [Thu, 15 Dec 2016 00:00:24 +0000 (00:00 +0000)]
Automatic date update in version.in
Maciej W. Rozycki [Wed, 14 Dec 2016 22:17:05 +0000 (22:17 +0000)]
MAINTAINERS: Add myself as a MIPS maintainer
* MAINTAINERS (Maintainers for particular sims): Add myself as
a MIPS maintainer.
Maciej W. Rozycki [Wed, 14 Dec 2016 21:49:56 +0000 (21:49 +0000)]
MIPS/opcodes: Also set disassembler's ASE flags from ELF structures
Respect any ASE flags recorded in ELF file structures for the purpose of
selecting instructions to be disassembled, preventing code from being
hex-dumped even though having been clearly indicated as valid at the
assembly time. Use date from the MIPS ABI flags structure if present,
and otherwise there may be an MDMX ASE flag set in the ELF file header.
For backwards compatibility only set extra flags and do not clear any,
preserving all previously set by the architecture selected to be
disassembled for.
include/
* elf/mips.h (Elf_Internal_ABIFlags_v0): Also declare struct
typedef as `elf_internal_abiflags_v0'.
bfd/
* bfd-in.h (elf_internal_abiflags_v0): New struct declaration.
(bfd_mips_elf_get_abiflags): New prototype.
* elfxx-mips.c (bfd_mips_elf_get_abiflags): New function.
* bfd-in2.h: Regenerate.
opcodes/
* mips-dis.c (mips_convert_abiflags_ases): New function.
(set_default_mips_dis_options): Also infer ASE flags from ELF
file structures.
binutils/
* testsuite/binutils-all/mips/mips-ase-1.d: New test.
* testsuite/binutils-all/mips/mips-ase-2.d: New test.
* testsuite/binutils-all/mips/mips-ase-3.d: New test.
* testsuite/binutils-all/mips/mips-ase-1.s: New test source.
* testsuite/binutils-all/mips/mips-ase-2.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
Maciej W. Rozycki [Wed, 14 Dec 2016 21:27:00 +0000 (21:27 +0000)]
MIPS/opcodes: Reorder ELF file header flag handling in disassembler
Move ELF file header flag interpretation code, used to set disassembler
options, beyond architecture setup. No functional change as the effects
of both code sections are disjoint from each other, but this provides
for a further expansion of ELF file header flag interpretation.
opcodes/
* mips-dis.c (set_default_mips_dis_options): Reorder ELF file
header flag interpretation code.
Maciej W. Rozycki [Wed, 14 Dec 2016 21:20:01 +0000 (21:20 +0000)]
MIPS16/GAS: Fix assertion failures with relocations on 16-bit instructions
Complement commit
c9775dde3277 ("MIPS16: Add R_MIPS16_PC16_S1 branch
relocation support)" and report an assembly error when a relocation is
required for an instruction, currently a branch only, that has been
forced to use its unextended encoding, either with the use of an
explicit `.t' mnemonic suffix, or by means of `.set noautoextend' being
active, fixing an assertion failure currently caused instead.
gas/
* config/tc-mips.c (md_convert_frag): Report an error instead of
asserting on `ext'.
* testsuite/gas/mips/mips16-branch-unextended-1.d: New test.
* testsuite/gas/mips/mips16-branch-unextended-2.d: New test.
* testsuite/gas/mips/mips16-branch-unextended-1.s: New test
source.
* testsuite/gas/mips/mips16-branch-unextended-2.s: New test.
* testsuite/gas/mips/mips16-branch-unextended.l: New stderr
output.
* testsuite/gas/mips/mips.exp: Run the new tests.
Maciej W. Rozycki [Wed, 14 Dec 2016 21:18:16 +0000 (21:18 +0000)]
MIPS16: Fix SP-relative SD instruction annotation
Fix the annotation of SP-relative SD instructions incorrectly marked as
reading from the PC rather than SP, which in turn prevented their 16-bit
forms from being scheduled into jump delay slots. This bug has been
there since forever.
opcodes/
* mips16-opc.c (mips16_opcodes): Set RD_SP rather than RD_PC in
`pinfo2' with SP-relative "sd" entries.
gas/
* testsuite/gas/mips/mips16-sprel-swap.d: New test.
* testsuite/gas/mips/mips16-sprel-swap.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
Maciej W. Rozycki [Wed, 14 Dec 2016 21:14:33 +0000 (21:14 +0000)]
MIPS16/opcodes: Fix and clarify MIPS16e commentary
Correct the note about JALRC/JRC being compact jumps rather than
branches, and add a reference from where the remaining MIPS16e additions
live and the jumps used to be too, complementing commit
ceb94aa50d68
("Update insn_mo when converting to a MIPS16e compact jump"),
<https://sourceware.org/ml/binutils/2011-06/msg00369.html>.
opcodes/
* mips16-opc.c (mips16_opcodes): Update comments on MIPS16e
compact jumps.
Yury Norov [Sat, 3 Dec 2016 13:20:43 +0000 (18:50 +0530)]
ld: aarch64: fix TLS relaxation where TCB_SIZE is used
TCB_SIZE is 2*sizeof(void *), which is 0x10 for lp64, and 0x8 for
ilp32. During relaxation, ld goes to do a replace:
bl __tls_get_addr => add R0, R0, TCB_SIZE
But actual implementation is:
bfd_putl32 (0x91004000, contents + rel->r_offset + 4);
Which is equivalent of add x0, x0, 0x10. This is wrong for ilp32.
The possible fix for it is:
bfd_putl32 (0x91000000 | (TCB_SIZE<<10), contents + rel->r_offset + 4);
But ilp32 also needs w-registers, so it's simpler to put proper
instruction in #if/#else condition.
There are 2 such relaxations in elfNN_aarch64_tls_relax(), and so 2 new
tests added for ilp32 mode to test it.
Yury
* bfd/elfnn-aarch64.c: fix TLS relaxations for ilp32 where
TCB_SIZE is used.
* ld/testsuite/ld-aarch64/aarch64-elf.exp: Add tests for the case.
* ld/testsuite/ld-aarch64/tls-relax-ld-le-small-ilp32.d: New file.
* ld/testsuite/ld-aarch64/tls-relax-ld-le-tiny-ilp32.d: New file.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Yury Norov [Wed, 14 Dec 2016 06:27:42 +0000 (11:57 +0530)]
Revert "bfd: aarch64: fix word and arrdess size declaration in ilp32 mode"
This reverts commit
a02c3512655cc2c8ad68e4b656959b7d284acc7d.
Yury Norov [Wed, 14 Dec 2016 06:26:54 +0000 (11:56 +0530)]
Revert "ld: aarch64: fix TLS relaxation where TCB_SIZE is used"
This reverts commit
6650f7bd18f8161b9f666d3e65a6346e23a9d85f.
Yury Norov [Fri, 9 Dec 2016 15:47:01 +0000 (21:17 +0530)]
bfd: aarch64: fix word and arrdess size declaration in ilp32 mode
Yury Norov [Sat, 3 Dec 2016 13:20:43 +0000 (18:50 +0530)]
ld: aarch64: fix TLS relaxation where TCB_SIZE is used
TCB_SIZE is 2*sizeof(void *), which is 0x10 for lp64, and 0x8 for
ilp32. During relaxation, ld goes to do a replace:
bl __tls_get_addr => add R0, R0, TCB_SIZE
But actual implementation is:
bfd_putl32 (0x91004000, contents + rel->r_offset + 4);
Which is equivalent of add x0, x0, 0x10. This is wrong for ilp32.
The possible fix for it is:
bfd_putl32 (0x91000000 | (TCB_SIZE<<10), contents + rel->r_offset + 4);
But ilp32 also needs w-registers, so it's simpler to put proper
instruction in #if/#else condition.
THere are 2 such relaxations in elfNN_aarch64_tls_relax(), and so 2 new
tests added for ilp32 mode to test it.
Yury
GDB Administrator [Wed, 14 Dec 2016 00:00:23 +0000 (00:00 +0000)]
Automatic date update in version.in
Cary Coutant [Tue, 13 Dec 2016 21:01:13 +0000 (13:01 -0800)]
Add --orphan-handling option.
gold/
PR gold/20749
* options.h (--orphan-handling): New option.
(General_options::Orphan_handling): New enum.
(General_options::orphan_handling_enum): New method.
(General_options::set_orphan_handling_enum): New method.
(General_options::orphan_handling_enum_): New data member.
* options.cc (General_options::General_options): Initialize new member.
(General_options::finalize): Convert --orphan-handling argument to enum.
* script-sections.cc (Script_sections::output_section_name): Check it.
Cary Coutant [Tue, 13 Dec 2016 19:49:22 +0000 (11:49 -0800)]
Do not use linker script to place static relocation sections.
gold/
PR gold/20522
* layout.cc (Layout::choose_output_section): Add is_reloc parameter.
Adjust all callers. Do not use linker script for is_reloc sections.
(Layout::layout_reloc): Pass is_reloc == true.
* layout.h (Layout::choose_output_section): Add is_reloc parameter.
Renlin Li [Tue, 13 Dec 2016 12:37:18 +0000 (12:37 +0000)]
[Binutils][AARCH64]Remove Cn register for coprocessor CRn, CRm field
The internal CN register representation for coprocessor fields used in aarch64
sys, sysl instructions are removed in this patch.
After the change, those fields are represented as immediate. Related checks are
added as well.
opcodes/
* aarch64-opc.c (aarch64_opnd_qualifiers): New CR value range
qualifier.
(operand_general_constraint_met_p): Remove case for CP_REG.
(aarch64_print_operand): Print CRn, CRm operand using imm field.
* aarch64-tbl.h (QL_SYS): Use CR qualifier.
(QL_SYSL): Likewise.
(aarch64_opcode_table): Change CRn, CRm operand class and type.
* aarch64-opc-2.c : Regenerate.
* aarch64-asm-2.c : Likewise.
* aarch64-dis-2.c : Likewise.
include/
* opcode/aarch64.h (aarch64_operand_class): Remove
AARCH64_OPND_CLASS_CP_REG.
(enum aarch64_opnd): Change AARCH64_OPND_Cn to AARCH64_OPND_CRn,
AARCH64_OPND_Cm to AARCH64_OPND_CRm.
(aarch64_opnd_qualifier): Define AARCH64_OPND_QLF_CR qualifier.
gas/
* config/tc-aarch64.c (AARCH64_REG_TYPES): Remove CN register.
(get_reg_expected_msg): Remove CN register case.
(parse_operands): rewrite parser for CRn, CRm operand.
(reg_names): Remove CN register.
* testsuite/gas/aarch64/diagnostic.s: Add a new test case.
* testsuite/gas/aarch64/diagnostic.l: Adjust error message.
Nick Clifton [Tue, 13 Dec 2016 17:05:20 +0000 (17:05 +0000)]
PE linker script improvements.
PR ld/19254
* scripttempl/pe.sc (.fini): KEEP this section.
(.gcc_except_table): Likewise.
(.pdata): Also accept .pdata*.
Jim Wilson [Tue, 13 Dec 2016 16:35:31 +0000 (08:35 -0800)]
Fix aarch64 sim bug with adds64, and add testcases for last 3 bug fixes.
sim/aarch64
* simulator.c (NEG, POS): Move before set_flags_for_add64.
(set_flags_for_add64): Replace with a modified copy of
set_flags_for_sub64.
sim/testsuite/sim/aarch64
* testutils.inc (pass): Move .Lpass to start.
(fail): Move .Lfail to start. Return 1 instead of 0.
(start): Moved .Lpass and .Lfail to here.
* adds.s: New.
* fstur.s: New.
* tbnz.s: New.
Jiong Wang [Tue, 13 Dec 2016 12:52:59 +0000 (12:52 +0000)]
[AArch64] Recognize R_AARCH64_P32_ABS32 as 32-bit relocation in readelf
binutils/
* readelf.c (is_32bit_abs_reloc): Recognize R_AARCH64_P32_ABS32.
Jiong Wang [Tue, 13 Dec 2016 12:50:17 +0000 (12:50 +0000)]
[AArch64] Make LD testcases support ILP32 mode
ld/
* testsuite/ld-aarch64/aarch64-elf.exp (aarch64_choose_lp64_emul): New
function.
(run_dump_test_lp64): New function which pass LP64 mode options to both
assembler and linker when building test binary.
(aarch64elftests): Remove eh-frame-merge test.
(eh-frame-merge-lp64): Restrict eh-frame-merge test to LP64 only.
(run_dump_test): Migrate to run_dump_test_lp64 if the test source was
written for LP64 only.
* testsuite/ld-aarch64/erratum843419.d: Support ILP32 mode.
* testsuite/ld-aarch64/farcall-b-defsym.d: Likewise.
* testsuite/ld-aarch64/farcall-b-plt.d: Likewise.
* testsuite/ld-aarch64/farcall-b.d: Likewise.
* testsuite/ld-aarch64/farcall-bl-defsym.d: Likewise.
* testsuite/ld-aarch64/farcall-bl-plt.d: Likewise.
* testsuite/ld-aarch64/farcall-bl.d: Likewise.
* testsuite/ld-aarch64/ifunc-15.d: Likewise.
* testsuite/ld-aarch64/ifunc-16.d: Likewise.
* testsuite/ld-aarch64/ifunc-5a-local.d: Likewise.
* testsuite/ld-aarch64/ifunc-5a.d: Likewise.
* testsuite/ld-aarch64/ifunc-5b-local.d: Likewise.
* testsuite/ld-aarch64/ifunc-5b.d: Likewise.
* testsuite/ld-aarch64/ifunc-5r-local.d: Likewise.
* testsuite/ld-aarch64/ifunc-6a.d: Likewise.
* testsuite/ld-aarch64/ifunc-6b.d: Likewise.
* testsuite/ld-aarch64/ifunc-7a.d: Likewise.
* testsuite/ld-aarch64/ifunc-7b.d: Likewise.
* testsuite/ld-aarch64/ifunc-8.d: Likewise.
* testsuite/ld-aarch64/limit-b.d: Likewise.
* testsuite/ld-aarch64/limit-bl.d: Likewise.
Jiong Wang [Tue, 13 Dec 2016 12:46:35 +0000 (12:46 +0000)]
[AArch64] Make GAS testcases support ILP32 mode
gas/
* gas/testsuite/gas/aarch64/addsub.d: Support ILP32 mode.
* gas/testsuite/gas/aarch64/advsimd-across.d: Likewise.
* gas/testsuite/gas/aarch64/advsimd-armv8_3.d: Likewise.
* gas/testsuite/gas/aarch64/advsimd-fp16.d: Likewise.
* gas/testsuite/gas/aarch64/advsimd-misc.d: Likewise.
* gas/testsuite/gas/aarch64/advsisd-copy.d: Likewise.
* gas/testsuite/gas/aarch64/advsisd-misc.d: Likewise.
* gas/testsuite/gas/aarch64/alias.d: Likewise.
* gas/testsuite/gas/aarch64/armv8-ras-1.d: Likewise.
* gas/testsuite/gas/aarch64/b_1.d: Likewise.
* gas/testsuite/gas/aarch64/beq_1.d: Likewise.
* gas/testsuite/gas/aarch64/bitfield-dump: Likewise.
* gas/testsuite/gas/aarch64/bitfield-no-aliases.d: Likewise.
* gas/testsuite/gas/aarch64/codealign.d: Likewise.
* gas/testsuite/gas/aarch64/codealign_1.d: Likewise.
* gas/testsuite/gas/aarch64/crc32-directive.d: Likewise.
* gas/testsuite/gas/aarch64/crc32.d: Likewise.
* gas/testsuite/gas/aarch64/crypto-directive.d: Likewise.
* gas/testsuite/gas/aarch64/crypto.d: Likewise.
* gas/testsuite/gas/aarch64/dwarf.d: Likewise.
* gas/testsuite/gas/aarch64/float-fp16.d: Likewise.
* gas/testsuite/gas/aarch64/floatdp2.d: Likewise.
* gas/testsuite/gas/aarch64/fp-armv8_3.d: Likewise.
* gas/testsuite/gas/aarch64/fp-const0-parse.d: Likewise.
* gas/testsuite/gas/aarch64/fp_cvt_int.d: Likewise.
* gas/testsuite/gas/aarch64/fpmov.d: Likewise.
* gas/testsuite/gas/aarch64/inst-directive.d: Likewise.
* gas/testsuite/gas/aarch64/ldr_1.d: Likewise.
* gas/testsuite/gas/aarch64/ldst-exclusive-armv8_3.d: Likewise.
* gas/testsuite/gas/aarch64/ldst-exclusive.d: Likewise.
* gas/testsuite/gas/aarch64/ldst-reg-imm-post-ind.d: Likewise.
* gas/testsuite/gas/aarch64/ldst-reg-imm-pre-ind.d: Likewise.
* gas/testsuite/gas/aarch64/ldst-reg-pair.d: Likewise.
* gas/testsuite/gas/aarch64/ldst-reg-reg-offset.d: Likewise.
* gas/testsuite/gas/aarch64/ldst-reg-uns-imm.d: Likewise.
* gas/testsuite/gas/aarch64/ldst-reg-unscaled-imm.d: Likewise.
* gas/testsuite/gas/aarch64/lor-directive.d: Likewise.
* gas/testsuite/gas/aarch64/lor.d: Likewise.
* gas/testsuite/gas/aarch64/lse-atomic.d: Likewise.
* gas/testsuite/gas/aarch64/mapmisc.d: Likewise.
* gas/testsuite/gas/aarch64/mov-no-aliases.d: Likewise.
* gas/testsuite/gas/aarch64/mov.d: Likewise.
* gas/testsuite/gas/aarch64/movi.d: Likewise.
* gas/testsuite/gas/aarch64/movw_label.d: Likewise.
* gas/testsuite/gas/aarch64/msr.d: Likewise.
* gas/testsuite/gas/aarch64/neon-fp-cvt-int.d: Likewise.
* gas/testsuite/gas/aarch64/neon-frint.d: Likewise.
* gas/testsuite/gas/aarch64/neon-ins.d: Likewise.
* gas/testsuite/gas/aarch64/neon-not.d: Likewise.
* gas/testsuite/gas/aarch64/neon-vfp-reglist-post.d: Likewise.
* gas/testsuite/gas/aarch64/neon-vfp-reglist.d: Likewise.
* gas/testsuite/gas/aarch64/no-aliases.d: Likewise.
* gas/testsuite/gas/aarch64/optional.d: Likewise.
* gas/testsuite/gas/aarch64/pac.d: Likewise.
* gas/testsuite/gas/aarch64/pan-directive.d: Likewise.
* gas/testsuite/gas/aarch64/pan.d: Likewise.
* gas/testsuite/gas/aarch64/rdma-directive.d: Likewise.
* gas/testsuite/gas/aarch64/rdma.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-dtprel_g0.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-dtprel_g0_nc.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-dtprel_g1.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-dtprel_hi12.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-dtprel_lo12-1.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-dtprel_lo12_nc.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-tlsldm-1.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-tlsldm-page-1.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-tlsldm_lo12_nc-1.d: Likewise.
* gas/testsuite/gas/aarch64/shifted.d: Likewise.
* gas/testsuite/gas/aarch64/sve.d: Likewise.
* gas/testsuite/gas/aarch64/symbol.d: Likewise.
* gas/testsuite/gas/aarch64/sysreg-1.d: Likewise.
* gas/testsuite/gas/aarch64/sysreg-2.d: Likewise.
* gas/testsuite/gas/aarch64/sysreg-3.d: Likewise.
* gas/testsuite/gas/aarch64/sysreg.d: Likewise.
* gas/testsuite/gas/aarch64/system-2.d: Likewise.
* gas/testsuite/gas/aarch64/system-3.d: Likewise.
* gas/testsuite/gas/aarch64/system.d: Likewise.
* gas/testsuite/gas/aarch64/tbz_1.d: Likewise.
* gas/testsuite/gas/aarch64/tlbi_op.d: Likewise.
* gas/testsuite/gas/aarch64/tls.d: Likewise.
* gas/testsuite/gas/aarch64/uao-directive.d: Likewise.
* gas/testsuite/gas/aarch64/uao.d: Likewise.
* gas/testsuite/gas/aarch64/virthostext-directive.d: Likewise.
* gas/testsuite/gas/aarch64/virthostext.d: Likewise.
* gas/testsuite/gas/aarch64/adr_1.d: Restrict test under -mabi=lp64.
* gas/testsuite/gas/aarch64/int-insns.d: Likewise.
* gas/testsuite/gas/aarch64/programmer-friendly.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-data.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-dtprel_g1_nc.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-dtprel_g2.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-dtprel_lo12-ldst16.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-dtprel_lo12-ldst32.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-dtprel_lo12-ldst64.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-dtprel_lo12-ldst8.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-dtprel_lo12_nc-ldst16.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-dtprel_lo12_nc-ldst32.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-dtprel_lo12_nc-ldst64.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-dtprel_lo12_nc-ldst8.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-gotoff_g0_nc.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-gotoff_g1.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-gottprel_g0_nc.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-gottprel_g1.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-insn.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-tlsdesc_off_g0_nc.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-tlsdesc_off_g1.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-tlsgd_g0_nc.d: Likewise.
* gas/testsuite/gas/aarch64/reloc-tlsgd_g1.d: Likewise.
* gas/testsuite/gas/aarch64/tail_padding.d: Likewise.
* gas/testsuite/gas/aarch64/tls-desc.d: Likewise.
Nick Clifton [Tue, 13 Dec 2016 11:19:23 +0000 (11:19 +0000)]
Add a 'Past Maintainers' section to the MAINTAINERS file. Retire Mark Mitchell's name to this section.
* MAINTAINERS (Past Maintainers): New section. Move Mark
Mitchell's name here.
Cary Coutant [Tue, 13 Dec 2016 02:51:29 +0000 (18:51 -0800)]
When using linker scripts, place linker-generated sections by the output section name.
2016-12-12 Igor Kudrin <ikudrin@accesssoftek.com>
Cary Coutant <ccoutant@gmail.com>
gold/
PR gold/14676
* script-sections.cc (Output_section_definition::output_section_name):
For linker-generated sections, compare with output section name.
* testsuite/Makefile.am (script_test_13): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/script_test_13.c: New source file.
* testsuite/script_test_13.sh: New script.
* testsuite/script_test_13.t: New linker script.
Cary Coutant [Tue, 13 Dec 2016 01:52:09 +0000 (17:52 -0800)]
Fix edge cases in orphan section placement.
There were still some cases I found where orphan section placement
was screwy -- where the script has no output section description for
either .data or .bss, a .bss orphan section ends up getting placed
before the .data section. In addition, if there is an output section
description for a data section not named .data (e.g., .rela.dyn),
the orphan .bss gets placed before it. This patch cleans that up,
by tracking the last allocated section even as we're adding orphans.
I've also improved segment layout in the absence of a PHDRS clause.
A zero-length NOBITS section will no longer force a new segment
when followed by a PROGBITS section.
2016-12-12 Cary Coutant <ccoutant@gmail.com>
gold/
* script-sections.cc (Orphan_section_placement::update_last_alloc):
New method.
(Orphan_section_placement::find_place): Place orphan .data section
after either RODATA or TEXT.
(Script_sections::place_orphan): Call update_last_alloc for allocated
sections.
(Script_sections::create_segments): Improve handling of BSS.
GDB Administrator [Tue, 13 Dec 2016 00:00:25 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Mon, 12 Dec 2016 23:00:06 +0000 (09:30 +1030)]
Don't add PHDR for objcopy/strip or ld script specifying PHDRS
HPPA64 needs to add a DT_PHDR header for shared libs. That's fine
when linking but shouldn't happen for strip/objcopy. Also PHDR must
come first so there's no need to look at all program headers.
bfd/
* elf64-hppa.c (elf64_hppa_modify_segment_map): Don't add PHDR
for objcopy/strip or when a ld script specifies PHDRS.
ld/
* testsuite/ld-elf/nobits-1.d: Remove xfail for hppa64.
* testsuite/ld-elf/note-1.d: Likewise.
* testsuite/ld-elf/note-2.d: Likewise.
Alan Modra [Mon, 12 Dec 2016 22:59:47 +0000 (09:29 +1030)]
Don't fudge p_vaddr when PHDR in segment
RX does horrible fudges to PT_LOAD p_vaddr, that affect the testsuite
and mean the target won't support dynamic objects. The latter
probably doesn't matter too much since RX is an embedded target, but
it's easy to stop some of the fudges in order to reduce special cases
for RX in the testsuite. The changes make sense in isolation too.
bfd/
* elf32-rx.c (elf32_rx_modify_program_headers): Don't adjust
segments that include the ELF file header or program headers.
ld/
* testsuite/ld-elf/flags1.d: Run for RX.
* testsuite/ld-scripts/phdrs.exp: Likewise.
* testsuite/ld-scripts/pr14962.d: Likewise.
* testsuite/ld-scripts/pr14962-2.d: Likewise.
Alan Modra [Mon, 12 Dec 2016 22:59:26 +0000 (09:29 +1030)]
[GOLD] Allow for larger alignment in script_test_15
PowerPC64 aligns .got to a 256 byte boundary. This tends to bump the
data segment file size.
PR gold/16711
* testsuite/script_test_15a.sh: Allows larger p_filesz.
* testsuite/script_test_15b.sh: Likewise.
* testsuite/script_test_15c.sh: Likewise.
Alan Modra [Mon, 12 Dec 2016 22:51:56 +0000 (09:21 +1030)]
[GOLD] Adjust testcase for PowerPC64
Since the linker created .TOC. symbol is placed at roughly .got+32k,
.toc input sections must be placed in or after .got if .toc entries
are accessed using 16-bit signed offset relocs. crt1.o contains such
a relocation.
PR gold/20717
* testsuite/pr20717.t: Add .got output section containing .toc.
Nathan Sidwell [Mon, 12 Dec 2016 17:52:37 +0000 (12:52 -0500)]
Port c++/78252 from GCC
PR c++/78252
* cp-demangle.c (struct d_print_info): Add is_lambda_arg field.
(d_print_init): Initialize it.
(d_print_comp_inner) <DEMANGLE_COMPONENT_TEMPLATE_PARAM>: Check
is_lambda_arg for auto.
<DEMANGLE_COMPONENT_REFERENCE,
DEMANGLE_COMPONENT_RVALUE_REFERENCE>: Skip smashing check when
is_lambda_arg.
<DEMANGLE_COMPONENT_LAMBDA>: Increment is_lambda_arg around arg
printing.
* testsuite/demangle-expected: Add lambda auto mangling cases.
Yao Qi [Mon, 12 Dec 2016 09:09:43 +0000 (09:09 +0000)]
Remove assert on exec_bfd in cris_delayed_get_disassembler
cris_delayed_get_disassembler has an assert that exec_bfd can't be
NULL, but this assert can be triggered like this,
(gdb) set architecture cris
The target architecture is assumed to be cris
(gdb) disassemble 0x0,+4
Dump of assembler code from 0x0 to 0x4:
0x00000000:
../../binutils-gdb/gdb/cris-tdep.c:3798: internal-error: int cris_delayed_get_disassembler(bfd_vma, disassemble_info*): Assertion `exec_bfd != NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
however, cris_get_disassembler does have code to handle the case that
bfd is NULL,
/* If there's no bfd in sight, we return what is valid as input in all
contexts if fed back to the assembler: disassembly *with* register
prefix. Unfortunately this will be totally wrong for v32. */
if (abfd == NULL)
return print_insn_cris_with_register_prefix;
This patch is to remove this assert.
gdb:
2016-12-12 Yao Qi <yao.qi@linaro.org>
PR tdep/20955
* cris-tdep.c (cris_delayed_get_disassembler): Remove the
assert.
Yao Qi [Mon, 12 Dec 2016 09:03:34 +0000 (09:03 +0000)]
Handle memory error in print_insn_rx
Nowadays, memory error in rx disassembly is not handled, so if I
start a fresh GDB, and disassemble,
(gdb) set architecture rx
The target architecture is assumed to be rx
(gdb) disassemble 0x0,+4
Dump of assembler code from 0x0 to 0x4:
0x00000000: brk
0x00000001: brk
0x00000002: brk
0x00000003: brk
the output is wrong. This patch adds code to call dis->memory_error_func
on memory error, and longjmp to print_insn_rx. With this patch applied,
(gdb) set architecture rx
The target architecture is assumed to be rx
(gdb) disassemble 0,+4
Dump of assembler code from 0x0 to 0x4:
0x00000000: Cannot access memory at address 0x0
opcodes:
2016-12-12 Yao Qi <yao.qi@linaro.org>
* rx-dis.c: Include <setjmp.h>
(struct private): New.
(rx_get_byte): Check return value of read_memory_func, and
call memory_error_func and OPCODES_SIGLONGJMP on error.
(print_insn_rx): Call OPCODES_SIGSETJMP.
Yao Qi [Mon, 12 Dec 2016 09:03:34 +0000 (09:03 +0000)]
Handle memory error in print_insn_rl78_common
Nowadays, memory error in rl78 disassembly is not handled, so if I
start a fresh GDB, and disassemble,
(gdb) set architecture rl78
The target architecture is assumed to be rl78
(gdb) disassemble 0x0,+4
Dump of assembler code from 0x0 to 0x4:
0x00000000: nop
0x00000001: nop
0x00000002: nop
0x00000003: nop
the output is wrong. This patch adds code to call dis->memory_error_func
on memory error, and longjmp to print_insn_rl78_common. With this
patch applied,
(gdb) set architecture rl78
The target architecture is assumed to be rl78
(gdb) disassemble 0,+4
Dump of assembler code from 0x0 to 0x4:
0x00000000: Cannot access memory at address 0x0
opcodes:
2016-12-12 Yao Qi <yao.qi@linaro.org>
* rl78-dis.c: Include <setjmp.h>.
(struct private): New.
(rl78_get_byte): Check return value of read_memory_func, and
call memory_error_func and OPCODES_SIGLONGJMP on error.
(print_insn_rl78_common): Call OPCODES_SIGJMP.
Igor Kudrin [Mon, 12 Dec 2016 04:31:09 +0000 (20:31 -0800)]
Fix earlier ChangeLog entry to give Igor credit, add testcases.
2016-12-01 Cary Coutant <ccoutant@gmail.com>
Igor Kudrin <ikudrin@accesssoftek.com>
PR gold/20717
* script-sections.cc (Script_sections): Set *keep to false when
no match.
2016-12-11 Igor Kudrin <ikudrin@accesssoftek.com>
PR gold/20717
* testsuite/Makefile.am (pr20717): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/pr20717.c: New test source file.
* testsuite/pr20717.sh: New test script.
* testsuite/pr20717.t: New test linker script.
Cary Coutant [Mon, 12 Dec 2016 01:31:25 +0000 (17:31 -0800)]
Fix problems with bss handling in linker scripts.
PR 16711 noted that gold allocates file space for BSS sections when using
a linker script. I've fixed that by rewriting set_section_addresses and
set_section_list_addresses to track the file offset separate from the
current virtual address, so that BSS sections do not move the file offset.
Now, if a series of BSS sections come at the end of a segment, we do not
allocate file space; but if a script forces them into the middle of a
segment, we will still allocate file space (matching Gnu ld behavior).
I've also added a warning when that happens.
That exposed another problem where orphan .bss sections were sometimes
placed in the middle of a segment. For example, if the script mentions
the .got section, but both .data and .bss are orphans, gold would put
both .data and .bss in front of .got. I've fixed that by ensuring that
orphan BSS sections are always placed after all other allocated sections.
It also exposed a problem where the SUBALIGN property is not handled
properly. The ld manual clearly states that it should override input section
alignment, whether greater or less than the given alignment, but gold would
only increase an input section's alignment. Gold would also place the output
section based on its original alignment before the SUBALIGN property took
effect, leading to a misaligned output section (where the input section
was properly aligned in memory, but was not aligned relative to the start
of the section), in violation of the ELF/gABI spec. I've fixed that by
making sure that the SUBALIGN property overrides the internal alignment of
the input sections as well as the external alignment of the output section.
This affected the behavior of script_test_2, which was written to expect
a misaligned section.
The net effect is, I think, improved compatibility with the BFD linker.
There are still cases where orphan placement differs, but the differences
should be rarer and less important. ALIGN and SUBALIGN behavior is closer,
but still not an exact match -- I still found cases where ld would create
a misaligned output section, and where gold will properly align it.
gold/
PR gold/16711
* output.cc (Output_section::set_final_data_size): Calculate data size
based on relative offset rather than file offset.
(Output_segment::set_section_addresses): Track file offset separately
from address offset.
(Output_segment::set_section_list_addresses): Add pfoff parameter.
Track file offset separately. Don't move file offset for BSS
sections.
* output.h (Output_segment::set_section_list_addresses): Add pfoff
parameter.
* script-sections.cc (Orphan_section_placement): Add PLACE_LAST_ALLOC.
(Orphan_section_placement::Orphan_section_placement): Initialize it.
(Orphan_section_placement::output_section_init): Track last allocated
section.
(Orphan_section_placement::find_place): Place BSS after last allocated
section.
(Output_section_element_input::set_section_addresses): Always override
input section alignment when SUBALIGN is specified.
(Output_section_definition::set_section_addresses): Override alignment
of output section when SUBALIGN is specified.
* testsuite/Makefile.am (script_test_15a, script_test_15b)
(script_test_15c): New test cases.
* testsuite/Makefile.in: Regenerate.
* testsuite/script_test_2.cc: Adjust expected layout.
* testsuite/script_test_15.c: New source file.
* testsuite/script_test_15a.sh: New shell script.
* testsuite/script_test_15a.t: New linker script.
* testsuite/script_test_15b.sh: New shell script.
* testsuite/script_test_15b.t: New linker script.
* testsuite/script_test_15c.sh: New shell script.
* testsuite/script_test_15c.t: New linker script.
Cary Coutant [Mon, 12 Dec 2016 00:40:11 +0000 (16:40 -0800)]
Regenerate Makefile.in to get rid of annoying diffs caused by non-deterministic automake.
* Makefile.in: Regenerate.
GDB Administrator [Mon, 12 Dec 2016 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sun, 11 Dec 2016 00:00:23 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sat, 10 Dec 2016 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in
Maciej W. Rozycki [Fri, 9 Dec 2016 23:11:40 +0000 (23:11 +0000)]
MIPS16: Remove unused `>' operand code
This code has never been used throughout the repository history, and
likely not before either, as due to the assymetry of MIPS16 instruction
set encoding there are no 32-bit shift operations having their immediate
shift count placed in the position of the usual `rx' instruction field.
gas/
* config/tc-mips.c (mips16_macro_build) <'>'>: Remove case.
include/
* opcode/mips.h: Remove references to `>' operand code.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'>'>: Remove cases.
Maciej W. Rozycki [Fri, 9 Dec 2016 22:50:07 +0000 (22:50 +0000)]
MIPS16/opcodes: Use hexadecimal interpretation for the `e' operand code
Make the `e' operand code used with raw EXTEND instructions use the
hexadecimal rather than decimal format, for consistency with what is
actually produced by code in `print_insn_mips16' dedicated to EXTEND
disassembly. Due to that special handling the operand code is only
interpreted for assembly however, which accepts either format either
way, so there is no functional change here.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'e'>: Use HINT rather
than UINT.
gas/
* testsuite/gas/mips/mips16-extend.d: New test.
* testsuite/gas/mips/mips16-extend.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
Maciej W. Rozycki [Fri, 9 Dec 2016 22:27:00 +0000 (22:27 +0000)]
MIPS16/opcodes: Reformat raw EXTEND and undecoded output
Use a tab rather than a space to separate `extend' and its uninterpreted
argument output, like with regular instructions. Separate hexadecimal
halves of undecoded extended instructions output with a space instead of
presenting them concatenated.
opcodes/
* mips-dis.c (print_insn_mips16): Use a tab rather than a space
to separate `extend' and its uninterpreted argument output.
Separate hexadecimal halves of undecoded extended instructions
output.
binutils/
* testsuite/binutils-all/mips/mips16-extend-noinsn.d: New test.
* testsuite/binutils-all/mips/mips16-extend-noinsn.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new test.
Pedro Alves [Fri, 9 Dec 2016 16:08:49 +0000 (16:08 +0000)]
gdb: Remove support for obsolete OSABIs and a.out
gdb/ChangeLog:
2016-12-09 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_TARGET_OBS): Remove vax-obsd-tdep.o.
* alpha-fbsd-tdep.c (_initialize_alphafbsd_tdep): Adjust.
* alpha-nbsd-tdep.c: Move comment to _initialize_alphanbsd_tdep.
(alphanbsd_core_osabi_sniffer): Delete.
(_initialize_alphanbsd_tdep): No longer handle a.out.
* alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Adjust.
* amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Adjust.
* amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Adjust.
* amd64-obsd-tdep.c (amd64obsd_supply_regset)
(amd64obsd_combined_regset)
(amd64obsd_iterate_over_regset_sections, amd64obsd_core_init_abi):
Delete.
(_initialize_amd64obsd_tdep): Don't handle a.out.
* arm-nbsd-nat.c (struct md_core, fetch_core_registers)
(arm_netbsd_core_fns): Delete.
(_initialize_arm_netbsd_nat): Don't register arm_netbsd_core_fns.
* arm-nbsd-tdep.c (arm_netbsd_aout_init_abi)
(arm_netbsd_aout_osabi_sniffer): Delete.
(_initialize_arm_netbsd_tdep): Don't handle a.out.
* arm-obsd-tdep.c (armobsd_core_osabi_sniffer): Delete.
(_initialize_armobsd_tdep): Don't handle a.out.
* arm-tdep.c (arm_gdbarch_init): Remove bfd_target_aout_flavour
case.
* breakpoint.c (disable_breakpoints_in_unloaded_shlib): Remove
SunOS a.out handling.
* configure.tgt (vax-*-netbsd* | vax-*-knetbsd*-gnu): Remove
vax-obsd-tdep.o from gdb_target_objs.
(vax-*-openbsd*): Likewise.
(*-*-freebsd*): Adjust default gdb_osabi.
(*-*-openbsd*): Likewise.
* dbxread.c (block_address_function_relative): Delete.
(dbx_symfile_read): Remove reference to
block_address_function_relative.
(dbx_symfile_read): Don't call read_dbx_dynamic_symtab.
(read_dbx_dynamic_symtab): Delete.
(process_one_symbol): Remove references to
block_address_function_relative.
* defs.h (GDB_OSABI_FREEBSD_AOUT, GDB_OSABI_NETBSD_AOUT): Remove.
(GDB_OSABI_FREEBSD_ELF): Rename to ...
(GDB_OSABI_FREEBSD): ... this.
(GDB_OSABI_NETBSD_ELF): Rename to ...
(GDB_OSABI_NETBSD): ... this.
(GDB_OSABI_OPENBSD_ELF): Rename to ...
(GDB_OSABI_OPENBSD): ... this.
(GDB_OSABI_HPUX_ELF, GDB_OSABI_HPUX_SOM): Remove.
* fbsd-tdep.c: Adjust comment.
* hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Adjust.
* hppa-obsd-tdep.c (GDB_OSABI_NETBSD_CORE): Delete.
(hppaobsd_core_osabi_sniffer): Delete.
(_initialize_hppabsd_tdep): Don't handle a.out.
* hppa-tdep.c (hppa_stub_frame_unwind_cache): Don't handle
GDB_OSABI_HPUX_SOM.
(hppa_gdbarch_init): Likewise.
* i386-bsd-tdep.c (i386bsd_aout_osabi_sniffer)
(i386bsd_core_osabi_sniffer, _initialize_i386bsd_tdep): Delete.
* i386-fbsd-tdep.c (i386fbsdaout_init_abi): Delete. Merge bits
with ...
(i386fbsd_init_abi): ... this.
(_initialize_i386fbsd_tdep): Don't handle a.out.
* i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Adjust.
* i386-obsd-tdep.c (i386obsd_aout_supply_regset)
(i386obsd_aout_gregset)
(i386obsd_aout_iterate_over_regset_sections): Delete.
(i386obsd_init_abi): Merge with i386obsd_elf_init_abi.
(i386obsd_aout_init_abi): Delete.
(_initialize_i386obsd_tdep): Don't handle a.out.
* m68k-bsd-tdep.c (m68kobsd_sigtramp_cache_init)
(m68kobsd_sigtramp): Delete.
(m68kbsd_init_abi): Merge with ...
(m68kbsd_elf_init_abi): ... this, and delete it.
(m68kbsd_aout_init_abi): Delete.
(m68kbsd_aout_osabi_sniffer, m68kbsd_core_osabi_sniffer): Delete.
(_initialize_m68kbsd_tdep): Don't handle a.out.
* mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Adjust.
* mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Adjust.
* osabi.c (gdb_osabi_names): Remove "a.out" entries. Drop "ELF"
suffixes. Remove "HP-UX" entries.
(generic_elf_osabi_sniff_abi_tag_sections): Adjust.
(generic_elf_osabi_sniffer): No longer handle GDB_OSABI_HPUX_ELF.
Adjust.
(_initialize_ppcfbsd_tdep): Adjust.
* ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Adjust.
* ppc-obsd-tdep.c (GDB_OSABI_NETBSD_CORE)
(ppcobsd_core_osabi_sniffer): Delete.
(_initialize_ppcobsd_tdep): Don't handle a.out.
* rs6000-tdep.c (rs6000_gdbarch_init): Adjust.
* sh-nbsd-tdep.c (GDB_OSABI_NETBSD_CORE)
(shnbsd_core_osabi_sniffer): Delete.
(_initialize_shnbsd_tdep): Don't handle a.out.
* solib.c (clear_solib): Don't handle SunOS/a.out.
* sparc-nbsd-tdep.c (sparc32nbsd_init_abi): Make extern.
(sparc32nbsd_aout_init_abi): Delete.
(sparc32nbsd_elf_init_abi): Merged into sparc32nbsd_init_abi.
(sparcnbsd_aout_osabi_sniffer): Delete.
(GDB_OSABI_NETBSD_CORE, sparcnbsd_core_osabi_sniffer): Delete.
(_initialize_sparcnbsd_tdep): No longer handle a.out.
* sparc-obsd-tdep.c (sparc32obsd_init_abi)
(_initialize_sparc32obsd_tdep): Adjust.
* sparc-tdep.h (sparc32nbsd_elf_init_abi): Rename to ...
(sparc32nbsd_init_abi): ... this.
* sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Adjust.
* sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Adjust.
* sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Adjust.
* stabsread.c: Update comment.
* symmisc.c (print_objfile_statistics): Don't mention "a.out" in
output.
* vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Adjust.
* vax-obsd-tdep.c: Delete file.
Yao Qi [Fri, 9 Dec 2016 15:44:48 +0000 (15:44 +0000)]
Add ChangeLog entries
ChangeLog entries are missed in my two previous commits.
Yao Qi [Fri, 9 Dec 2016 15:27:43 +0000 (15:27 +0000)]
Create tdep->rx_psw_type and tdep->rx_fpsw_type lazily
I build GDB with all targets enabled, and "set architecture rx",
GDB crashes,
(gdb) set architecture rx
Program received signal SIGSEGV, Segmentation fault.
append_flags_type_flag (type=0x20cc360, bitpos=bitpos@entry=0, name=name@entry=0xd27529 "C") at ../../binutils-gdb/gdb/gdbtypes.c:4926
4926 name);
(gdb) bt 10
#0 append_flags_type_flag (type=0x20cc360, bitpos=bitpos@entry=0, name=name@entry=0xd27529 "C") at ../../binutils-gdb/gdb/gdbtypes.c:4926
#1 0x00000000004ce725 in rx_gdbarch_init (info=..., arches=<optimized out>) at ../../binutils-gdb/gdb/rx-tdep.c:1051
#2 0x00000000006b05a4 in gdbarch_find_by_info (info=...) at ../../binutils-gdb/gdb/gdbarch.c:5269
#3 0x000000000060eee4 in gdbarch_update_p (info=...) at ../../binutils-gdb/gdb/arch-utils.c:557
#4 0x000000000060f8a8 in set_architecture (ignore_args=<optimized out>, from_tty=1, c=<optimized out>) at ../../binutils-gdb/gdb/arch-utils.c:531
#5 0x0000000000593d0b in do_set_command (arg=<optimized out>, arg@entry=0x20bee81 "rx ", from_tty=from_tty@entry=1, c=c@entry=0x20b1540)
at ../../binutils-gdb/gdb/cli/cli-setshow.c:455
#6 0x00000000007665c3 in execute_command (p=<optimized out>, p@entry=0x20bee70 "set architecture rx ", from_tty=1) at ../../binutils-gdb/gdb/top.c:666
#7 0x00000000006935f4 in command_handler (command=0x20bee70 "set architecture rx ") at ../../binutils-gdb/gdb/event-top.c:577
#8 0x00000000006938d8 in command_line_handler (rl=<optimized out>) at ../../binutils-gdb/gdb/event-top.c:767
#9 0x0000000000692c2c in gdb_rl_callback_handler (rl=0x20be7f0 "") at ../../binutils-gdb/gdb/event-top.c:200
The cause is that we want to access some builtin types in gdbarch init, but
it is not initialized yet. I fix it by creating the type when it is to be
used. We've already done this in sparc, sparc64 and m68k.
gdb:
2016-12-09 Yao Qi <yao.qi@linaro.org>
PR tdep/20954
* rx-tdep.c (rx_psw_type): New function.
(rx_fpsw_type): New function.
(rx_register_type): Call rx_psw_type and rx_fpsw_type.
(rx_gdbarch_init): Move code to rx_psw_type and
rx_fpsw_type.
gdb/testsuite:
2016-12-09 Yao Qi <yao.qi@linaro.org>
* gdb.base/all-architectures.exp.in: Remove kfail for "rx".
Yao Qi [Fri, 9 Dec 2016 15:27:43 +0000 (15:27 +0000)]
Create tdep->rl78_psw_type lazily
I build GDB for all targets enabled. When I "set architecture rl78",
GDB crashes,
(gdb) set architecture rl78
Program received signal SIGSEGV, Segmentation fault.
append_flags_type_flag (type=0x20cc0e0, bitpos=bitpos@entry=0, name=name@entry=0x11dba3f "CY") at ../../binutils-gdb/gdb/gdbtypes.c:4926
4926 name);
(gdb) bt 10
#0 append_flags_type_flag (type=0x20cc0e0, bitpos=bitpos@entry=0, name=name@entry=0x11dba3f "CY") at ../../binutils-gdb/gdb/gdbtypes.c:4926
#1 0x00000000004aaca8 in rl78_gdbarch_init (info=..., arches=<optimized out>) at ../../binutils-gdb/gdb/rl78-tdep.c:1410
#2 0x00000000006b05a4 in gdbarch_find_by_info (info=...) at ../../binutils-gdb/gdb/gdbarch.c:5269
#3 0x000000000060eee4 in gdbarch_update_p (info=...) at ../../binutils-gdb/gdb/arch-utils.c:557
#4 0x000000000060f8a8 in set_architecture (ignore_args=<optimized out>, from_tty=1, c=<optimized out>) at ../../binutils-gdb/gdb/arch-utils.c:531
#5 0x0000000000593d0b in do_set_command (arg=<optimized out>, arg@entry=0x20be851 "rl78", from_tty=from_tty@entry=1, c=c@entry=0x20b1540)
at ../../binutils-gdb/gdb/cli/cli-setshow.c:455
#6 0x00000000007665c3 in execute_command (p=<optimized out>, p@entry=0x20be840 "set architecture rl78", from_tty=1) at ../../binutils-gdb/gdb/top.c:666
#7 0x00000000006935f4 in command_handler (command=0x20be840 "set architecture rl78") at ../../binutils-gdb/gdb/event-top.c:577
#8 0x00000000006938d8 in command_line_handler (rl=<optimized out>) at ../../binutils-gdb/gdb/event-top.c:767
#9 0x0000000000692c2c in gdb_rl_callback_handler (rl=0x20be890 "") at ../../binutils-gdb/gdb/event-top.c:200
The cause is that we want to access some builtin types in gdbarch init, but
it is not initialized yet. I fix it by creating the type when it is to be
used. We've already done this in sparc, sparc64 and m68k.
gdb:
2016-12-09 Yao Qi <yao.qi@linaro.org>
PR tdep/20953
* rl78-tdep.c (rl78_psw_type): New function.
(rl78_register_type): Call rl78_psw_type.
(rl78_gdbarch_init): Move code to rl78_psw_type.
gdb/testsuite:
2016-12-09 Yao Qi <yao.qi@linaro.org>
* gdb.base/all-architectures.exp.in: Remove kfail for rl78.
Pedro Alves [Fri, 9 Dec 2016 14:59:09 +0000 (14:59 +0000)]
Add test that exercises all bfd architecture, osabi, endian, etc. combinations
This adds a test that exposes several problems fixed by earlier
patches:
#1 - Buffer overrun when host/target formats match, but sizes don't.
https://sourceware.org/ml/gdb-patches/2016-03/msg00125.html
#2 - Missing handling for FR-V FR300.
https://sourceware.org/ml/gdb-patches/2016-03/msg00117.html
#3 - BFD architectures with spaces in their names (v850).
https://sourceware.org/ml/binutils/2016-03/msg00108.html
#4 - The OS ABI names with spaces issue.
https://sourceware.org/ml/gdb-patches/2016-03/msg00116.html
#5 - Bogus HP/PA long double format.
https://sourceware.org/ml/gdb-patches/2016-03/msg00122.html
#6 - Cris big endian internal error.
https://sourceware.org/ml/gdb-patches/2016-03/msg00126.html
#7 - Several PowerPC bfd archs/machines not handled by gdb.
https://sourceware.org/bugzilla/show_bug.cgi?id=19797
And hopefully helps catch others in the future.
This started out as a test that simply did,
gdb -ex "print 1.0L"
to exercise #1 above.
Then to cover both 32-bit target / 64-bit host and the converse, I
thought of having the testcase print the floats twice, once with the
architecture set to "i386" and then to "i386:x86-64". This way it
wouldn't matter whether gdb was built as 32-bit or a 64-bit program.
Then I thought that other archs might have similar host/target
floatformat conversion issues as well. Instead of hardcoding some
architectures in the test file, I thought we could just iterate over
all bfd architectures and OS ABIs supported by the gdb build being
tested. This is what then exposed all the other problems listed
above...
With an --enable-targets=all, this exercises over 14 thousand
combinations. If left in a single test file, it all consistenly runs
in under a minute on my machine (An Intel i7-4810MQ @ 2.8 MHZ running
Fedora 23). Split in 8 chunks, as in this commit, it runs in around
25 seconds, with make -j8.
To avoid flooding the gdb.sum file, it avoids calling "pass" on each
tested combination/iteration. I'm explicitly not implementing that by
passing an empty message to gdb_test / gdb_test_multiple, because I
still want a FAIL to be logged in gdb.sum. So instead this puts the
internal passes in the gdb.log file, only, prefixed "IPASS:", for
internal pass. TBC, if some iteration fails, it'll still show up as
FAIL in gdb.sum. If this is an approach that takes on, I can see us
extending the common bits to support it for all testcases.
gdb/testsuite/ChangeLog:
2016-12-09 Pedro Alves <palves@redhat.com>
* gdb.base/all-architectures-0.exp: New file.
* gdb.base/all-architectures-1.exp: New file.
* gdb.base/all-architectures-2.exp: New file.
* gdb.base/all-architectures-3.exp: New file.
* gdb.base/all-architectures-4.exp: New file.
* gdb.base/all-architectures-5.exp: New file.
* gdb.base/all-architectures-6.exp: New file.
* gdb.base/all-architectures-7.exp: New file.
* gdb.base/all-architectures.exp.in: New file.
Yao Qi [Fri, 9 Dec 2016 09:51:20 +0000 (09:51 +0000)]
Use code cache in aarch64 prologue analyzer
This patch change aarch prologue analyzer using code cache, in order
to improve the performance of remote debugging.
gdb.perf/skip-prologue.exp (measured by wall-time) is improved when
the program is compiled without debug information.
Original Patched Original Patched
without dbg without dbg with dbg with dbg
/ 11.
1635239124 9.
99472999573 9.
65339517593 9.
66648793221
-fstack-protector-all 11.
2560930252 9.338118 9.
63896489143 9.
59474396706
gdb:
2016-12-9 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (instruction_reader::read): Call
read_code_unsigned_integer instead of
read_memory_unsigned_integer.
Yao Qi [Fri, 9 Dec 2016 09:51:20 +0000 (09:51 +0000)]
Use code cache in arm prologue analyzer
This patch change arm prologue analyzer using code cache, in order
to improve the performance of remote debugging.
gdb.perf/skip-prologue.exp (measured by wall-time) is improved a lot,
Original Patched Original Patched
without dbg without dbg with dbg with dbg
-marm 14.
166741848 9.
32852292061 11.
4908499718 9.
16302204132
-marm 14.
6705040932 9.
34849786758 18.
2788009644 9.
14823913574
\-fstack-protector-all
-mthumb 34.
4391930103 10.
6062178612 13.
7886838913 10.
3094120026
-mthumb
\-fstack-protector-all 34.
9310460091 10.
6413481236 25.
3875930309 10.
6294929981
gdb:
2016-12-09 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (skip_prologue_function): Call
read_code_unsigned_integer instead of
read_memory_unsigned_integer.
(thumb_analyze_prologue): Likewise.
(arm_analyze_load_stack_chk_guard): Likewise.
(arm_skip_stack_protector): Likewise.
(arm_analyze_prologue):Likewise.
(extend_buffer_earlier): Call target_read_code instead
of target_read_memory.
(arm_adjust_breakpoint_address): Likewise.
Yao Qi [Fri, 9 Dec 2016 09:51:20 +0000 (09:51 +0000)]
Compile gdb.perf/skip-prologue.c with and without debug info
gdb.perf/skip-prologue.exp is intended to measure the performance of
skipping prologue with prologue analysis by setting breakpoints.
However, if program is compiled with debug info, GDB is smart to
skip prologue by line table from debug info, so prologue analysis
is not exercised at all.
This patch adds a parameter COMPILE to specify compiling with
debug information, otherwise, it is compiled without debug
information.
gdb/testsuite:
2016-12-09 Yao Qi <yao.qi@linaro.org>
* gdb.perf/skip-prologue.exp: Add parameter COMPILE.
Thomas Schwinge [Wed, 25 May 2016 16:54:40 +0000 (18:54 +0200)]
Hurd: Adjust to changes to "push pruning old threads down to the target"
For "info threads", we currently run into:
$ gdb/gdb -q -nw -nx --batch -ex start -ex info\ threads bfd/doc/chew
Temporary breakpoint 1 at 0x80486e0: file ../../../W._C._Handy/bfd/doc/chew.c, line 1535.
[New Thread 10656.5]
Thread 4 hit Temporary breakpoint 1, main (ac=1, av=0x102cd84) at ../../../W._C._Handy/bfd/doc/chew.c:1535
1535 {
Id Target Id Frame
1 bogus thread id 1 Can't fetch registers from thread bogus thread id 1: No such thread
Before commit
e8032dde10b743253125d7defb5f5503b21c1d26,
gdb/thread.c:update_thread_list used to call prune_threads, after that change
it doesn't anymore, and we don't implement the to_update_thread_list target
method where the prune_threads call got moved. For now, apply a fix, related
to commit
c82f56d9d760a9b4034eeaac44f2f0fa5779ff69 "Hurd: Adjust to
startup-with-shell changes", which restores the previous behavior:
Id Target Id Frame
* 4 Thread 10688.4 main (ac=1, av=0x102cd84) at ../../../W._C._Handy/bfd/doc/chew.c:1535
5 Thread 10688.5 0x0106096c in ?? () from /lib/i386-gnu/libc.so.0.3
Not perfect, but at least better.
gdb/
* gnu-nat.c (gnu_create_inferior): After startup_inferior, call
prune_threads.
Thomas Schwinge [Thu, 8 Dec 2016 17:42:03 +0000 (18:42 +0100)]
Avoid PATH_MAX usage
On GNU/Hurd, there is no "#define PATH_MAX", so this failed to build.
gdb/
* inferior.c (print_selected_inferior): Avoid PATH_MAX usage.
GDB Administrator [Fri, 9 Dec 2016 00:00:25 +0000 (00:00 +0000)]
Automatic date update in version.in
projects / binutils-gdb.git / log