fix strict-aliasing warnings
* linux-x86-low.c (amd64_emit_const): Call memcpy instead of
casting pointers.
(amd64_emit_reg, amd64_emit_int_call_1, amd64_emit_void_call_2):
(i386_emit_const, i386_emit_reg, i386_emit_int_call_1):
(i386_emit_void_call_2): Likewise.

ChangeLog:

* infrun.c (proceed): Do not single-step into signal delivery
when stepping off a breakpoint location.
(insert_step_resume_breakpoint_at_frame): Move prototype earlier.
(insert_step_resume_breakpoint_at_caller): Likewise.
(insert_step_resume_breakpoint_at_sal): Likewise.
(insert_longjmp_resume_breakpoint): Likewise.

testsuite/ChangeLog:

* gdb.base/annota1.exp: Accept breakpoints-invalid annotation
while delivering signal.

2011-04-27  Yao Qi  <yao@codesourcery.com>

* common/linux-ptrace.h: Remove include <sys/wait.h>.

2011-04-27  Tristan Gingold  <gingold@adacore.com>

* xcoff.h (F_FDPR_PROF, F_FDPR_OPTI, F_DSA, F_VARPG)
(STYP_DWARF, SSUBTYP_DWINFO)
(SSUBTYP_DWLINE, SSUBTYP_DWPBNMS, SSUBTYP_DWPBTYP)
(SSUBTYP_DWARNGE, SSUBTYP_DWABREV, SSUBTYP_DWSTR)
(SSUBTYP_DWRNGES, STYP_TDATA, STYP_TBSS, R_TLS, R_TLS_IE)
(R_TLS_LD, R_TLS_LE, R_TLSM, R_TLSML, R_TOCU, R_TOCL, C_DWARF):
New macros.

fix procfs.c:procfs_pass_signals advance declaration

gdb/ChangeLog:

* procfs.c (procfs_pass_signals): Fix advance declaration.

* target.h (struct target_ops): Remove to_notice_signals;
add to_pass_signals.
(target_notice_signals): Remove.
(target_pass_signals): Add prototype.
* target.c (update_current_target): Remove to_notice_signals;
mention to_pass_signals.
(target_pass_signals): New function.
(debug_to_notice_signals): Remove.
(setup_target_debug): Do not install debug_to_notice_signals.

* infrun.c (signal_pass): New global.
(resume): Call target_pass_signals.
(handle_inferior_event): Report all signals while stepping over
non-steppable watchpoint.  Reset trap_expected to ensure breakpoints
are re-inserted when stepping over a signal handler.
(signal_cache_update): New function.
(signal_stop_update): Call it.
(signal_print_update): Likewise.
(signal_pass_update): Likewise.
(handle_command): Call signal_cache_update and target_pass_signals
instead of target_notice_signals.
(_initialize_infrun): Initialize signal_pass.

* linux-nat.c (pass_mask): New global.
(linux_nat_pass_signals): New function.
(linux_nat_create_inferior): Report all signals initially.
(linux_nat_attach): Likewise.
(linux_nat_resume): Use pass_mask to decide whether to directly
handle an inferior signal.
(linux_nat_wait_1): Likewise.
(linux_nat_add_target): Install to_pass_signals callback.

* nto-procfs.c (notice_signals): Remove.
(procfs_resume): Do not call notice_signals.
(procfs_notice_signals): Remove.
(procfs_pass_signals): New function.
(init_procfs_ops): Install to_pass_signals callback instead of
to_notice_signals callback.
(_initialize_procfs): Report all signals initially.

* procfs.c (procfs_notice_signals): Remove.
(procfs_pass_signals): New function.
(procfs_target): Install to_pass_signals callback instead of
to_notice_signals callback.
(register_gdb_signals): Remove.
(procfs_debug_inferior): Report all signals initially.
(procfs_init_inferior): Remove redundant register_gdb_signals call.

* remote.c (remote_pass_signals): Add numsigs and pass_signals
parameters; use them instead of calling signal_..._state routines.
(remote_notice_signals): Remove.
(remote_start_remote): Report all signals initially.
(remote_resume): Do not call remote_pass_signals.
(_initialize_remote): Install to_pass_signals callback instead of
to_notice_signals callback.

2011-04-27  Pedro Alves  <pedro@codesourcery.com>

gdb/
* breakpoint.c (user_settable_breakpoint): Delete.
(user_breakpoint_p): Remove check on user_settable_breakpoint.
(delete_command): Check user_breakpoint_p instead of looking at
the breakpoint's type.
(disable_command): Ditto.
(enable_command): Ditto.
(delete_trace_command): Use user_breakpoint_p instead of looking
at the breakpoint number directly.  When checking if there are
user visible tracepoints, in order to know whether to ask the user
for confirmation, check whether the breakpoint is actually a
tracepoint.

2011-04-27  Tristan Gingold  <gingold@adacore.com>

        * dwarf.c (process_extended_line_op): Handle
        DW_LNE_HP_source_file_correlation.

* python/py-breakpoint.c (gdbpy_breakpoint_created): Fix
compilation.

MI breakpoint notifications.

        * annotate.c (breakpoint_changed): Adjust parameter type.
        * breakpoint.c (set_breakpoint_condition): Adjust to change
        in breakpoint_modified type.
        (breakpoint_set_commands): Likewise.
        (do_map_commands_command): Likewise.
        (bpstat_check_breakpoint_conditions): Notify that breakpoint has
        changed after bumping hit count.
        (bpstat_stop_status): Likewise.
        (print_one_breakpoint_location): Don't wrap in tuple here.
        (print_one_breakpoint): Always print individual locations.
        For locations, use unnamed tuple.
        (disable_breakpoints_in_unloaded_shlib): Notify that breakpoint
        has changed.
        (create_catchpoint, create_syscall_event_catchpoint): Call
        breakpoint_created obsever.
        (mention): Don't call breakpoint_created observer.
        (create_breakpoint_sal): Call breakpoint_created observer.
        (create_breakpoint, watch_command_1): Likewise.
        (create_ada_exception_breakpoint): Likewise.
        (delete_breakpoint): Call breakpoint_deleted breakpoint.
        (locations_are_equal): New.
        (update_breakpoint_locations): If locations were changed, notify.
        (set_ignore_count, disable_breakpoint, do_enable_breakpoint):
        Call breakpoint_modified observer.

        * mi/mi-cmd-break.c (breakpoint_notify): Adjust.
        (mi_cmd_break_insert): Don't set observers for modify and delete.
        * mi/mi-interp.c (mi_suppress_breakpoint_notifications): New.
        (mi_breakpoint_created, mi_breakpoint_deleted)
        (mi_breakpoint_modified): New.
        (mi_interpreter_init): Hook the above.
        * mi/mi-main.c (mi_cmd_execute): Disable breakpoint notifications
        while -break-* commands are executing.
        * mi/mi-main.h (mi_suppress_breakpoint_notifications): New.
        * mi/mi-out.c (struct ui_out_data): New field original_buffer.
        (mi_redirect): New.
        (mi_ui_out_impl): Hook in mi_redirect.
        (mi_field_skip): True to the name, skip the field, don't output
        a field with an empty value.

        * python/py-breakpoint.c (gdbpy_breakpoint_created)
        (gdbpy_breakpoint_deleted): Adjust.
        * tui/tui-hooks.c (tui_event_create_breakpoint)
        (tui_event_delete_breakpoint, tui_event_modify_breakpoint): Adjust.

Updated Danish, Esperanto and French translations.

daily update

*** empty log message ***

2011-04-26  Aleksandar Ristovski  <aristovski@qnx.com>

* nto-procfs.c (procfs_insert_hw_watchpoint): Fix prototype.
(procfs_remove_hw_watchpoint): Likewise.

2011-04-26  Michael Walle  <michael@walle.cc>

* remote.c (remote_start_remote): Ack packet after sending the
interrupt sequence.

gdb/

        * linux-nat.c: Move common macros to ...
        Include linux-ptrace.h.
        * common/linux-ptrace.h: ... here.  New.

gdb/gdbserver/

        * linux-low.c: Move common macros to linux-ptrace.h.
        Include linux-ptrace.h.
* Makefile.in (linux_ptrace_h): New.
(linux-low.o): Depends on linux-ptrace.h.

* dw2gencfi.c (dwcfi_seg_list): New struct.
(dwcfi_hash): New static hash variable.
(get_debugseg_name): New.
(alloc_debugseg_item): New.
(make_debug_seg): New.
(dwcfi_hash_insert): New.
(dwcfi_hash_find): New.
(dwcfi_hash_find_or_make): New.
(cfi_insn_data): New member cur_seg.
(cie_entry): Likewise.
(fde_entry): New cseg and handled members.
(alloc_fde_entry): Initialize cseg member.
(alloc_cfi_insn_data): Initialize cur_seg member.
(dot_cfi_sections): Compare for beginning of
section names via strncmp.
(get_cfi_seg): New.
(cfi_finish): Treat link-once sections.
(is_now_linkonce_segment): New local helper.
(output_cie): Ignore cie entries not member of current
segment.
(output_fde): Likewise.
(select_cie_for_fde): Likewise.
(cfi_change_reg_numbers): Add new argument for current segment
and ignore insn elements, if not part of current segment.
* ehopt.c (get_cie_info): Use strncmp for
section name matching.
(heck_eh_frame): Likewise.

* coffcode.h (sec_to_styp_flags): Allow linkonce for
debugging sections.

* scripttempl/pe.sc: Handle .eh_frame($|.)* sections.
* scripttempl/pep.sc: Likewise.

* ld-pe/pe.exp: Add cfi/cfi32 tests.
* ld-pe/cfi.d: New.
* ld-pe/cfi32.d: New.
* ld-pe/cfia.s: New.
* ld-pe/cfib.s: New.

2011-04-26  Tristan Gingold  <gingold@adacore.com>

* coff64-rs6000.c: Convert to ISO-C.  Remove PARAMS and PTR macros.

* readelf.c (print_stapsdt_note): New function.
(process_note): Use it.

* readelf.c (get_stapsdt_note_type): New function.
(process_note): Recognize "stapsdt" notes.

* readelf.c (process_corefile_note_segment): Change header field
widths.
(process_note): Change field widths.

sim: gpio: add output support

Make all of the pins bidirectional, and support sending signals when
software drives the pins as outputs.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

sim: gpio: update mask a/b signals better

When the mask a/b MMRs are written, the output signal might change levels
(as pins are [un]masked), so make sure we update the output level.

Further, make sure we handle edge ints correctly by first sending a high
signal followed by a low signal.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

*** empty log message ***

daily update

* ppc-opc.c: (powerpc_opcodes): Enable icswx for POWER7.

* incremental-dump.cc (dump_incremental_inputs): Print local
symbol info for each input file.
* incremental.cc
(Output_section_incremental_inputs::set_final_data_size): Add local
symbol info to input file entries in incremental info.
(Output_section_incremental_inputs::write_info_blocks): Likewise.
(Sized_incr_relobj::Sized_incr_relobj): Initialize new data members.
(Sized_incr_relobj::do_add_symbols): Cosmetic change.
(Sized_incr_relobj::do_count_local_symbols): Replace stub with
implementation.
(Sized_incr_relobj::do_finalize_local_symbols): Likewise.
(Sized_incr_relobj::do_relocate): Write the local symbols.
(Sized_incr_dynobj::do_add_symbols): Cosmetic change.
* incremental.h (Incremental_inputs_reader::get_symbol_offset):
Adjust size of input file header.
(Incremental_inputs_reader::get_local_symbol_offset): New function.
(Incremental_inputs_reader::get_local_symbol_count): New function.
(Incremental_inputs_reader::get_input_section): Adjust size of input
file header.
(Incremental_inputs_reader::get_global_symbol_reader): Likewise.
(Sized_incr_relobj::This): New typedef.
(Sized_incr_relobj::sym_size): New const data member.
(Sized_incr_relobj::Local_symbol): New struct.
(Sized_incr_relobj::do_output_local_symbol_count): New function.
(Sized_incr_relobj::do_local_symbol_offset): New function.
(Sized_incr_relobj::local_symbol_count_): New data member.
(Sized_incr_relobj::output_local_dynsym_count_): New data member.
(Sized_incr_relobj::local_symbol_index_): New data member.
(Sized_incr_relobj::local_symbol_offset_): New data member.
(Sized_incr_relobj::local_dynsym_offset_): New data member.
(Sized_incr_relobj::local_symbols_): New data member.
* object.h (Relobj::output_local_symbol_count): New function.
(Relobj::local_symbol_offset): New function.
(Relobj::do_output_local_symbol_count): New function.
(Relobj::do_local_symbol_offset): New function.
(Sized_relobj::do_output_local_symbol_count): New function.
(Sized_relobj::do_local_symbol_offset): New function.

gdb/
* elfread.c (elf_symfile_read): Protect dwarf2_initialize_objfile by
!objfile_has_partial_symbols.  New comment.
* objfiles.c (objfile_has_partial_symbols): Call HAS_SYMBOLS if
SYM_READ_PSYMBOLS is not present. Extend the comment.
* symfile.h (struct sym_fns): Extend the sym_read_psymbols comment.

gdb/testsuite/
* gdb.base/gdbindex-stabs-dwarf.c: New file.
* gdb.base/gdbindex-stabs.c: New file.
* gdb.base/gdbindex-stabs.exp: New file.

gdb/
* defs.h (ENUM_BITFIELD): Remove.

include/
* bfdlink.h (ENUM_BITFIELD): Remove.

merge from gcc:
include/
* ansidecl.h (ENUM_BITFIELD): New, from gcc/system.h.

* readelf.c (print_gnu_note): New function.
(process_note): Use it.

2011-04-25  Yao Qi  <yao@codesourcery.com>

* gdb.dwarf2/dw2-double-set-die-type.S: Replace comment char `#'
with /*...*/.
* gdb.dwarf2/dw2-modula2-self-type.S: Likewise.

*** empty log message ***

daily update

PR ld/12365
PR ld/12696
include/
* bfdlink.h (ENUM_BITFIELD): Define.
(struct bfd_link_hash_entry): Make "type" a bitfield.  Add "non_ir_ref".
(struct bfd_link_callbacks <notice>): Pass bfd_link_hash_entry pointer
rather than "name".
bfd/
* coff-aux.c (coff_m68k_aux_link_add_one_symbol): Update "notice" call.
* linker.c (_bfd_link_hash_newfunc): Clear bitfields.
(_bfd_generic_link_add_one_symbol): Update "notice" call.
* elflink.c (_bfd_elf_merge_symbol): Don't skip weak redefs when
it is a redef of an IR symbol in a real BFD.
ld/
* ldmain.c (notice): Delete "name" param, add "h".
* plugin.c (plugin_notice): Likewise.  Set non_ir_ref.  Handle
redefinitions of IR symbols in real BFDs.
(plugin_multiple_definition, plugin_multiple_common): Delete.
(non_ironly_hash, init_non_ironly_hash): Delete.
(is_visible_from_outside): Traverse entry_symbol chain.
(get_symbols): Use non_ir_ref flag rather than hash lookup.

gdb/testsuite/
* gdb.python/py-value.exp (test_objfiles): Name the first test
`py-value in file.filename'.

gdb/
* NEWS: Document the new gdbserver --once option.

gdb/doc/
* gdb.texinfo (Starting and Stopping Trace Experiments): New anchor
for disconnected tracing.
(Multi-Process Mode for @code{gdbserver}): Mention --multi and
extended-remote relationship.  Mention --once.
(TCP port allocation lifecycle of @code{gdbserver}): New.

gdb/gdbserver/
* remote-utils.c (handle_accept_event): Close LISTEN_DESC only if
RUN_ONCE.  Comment for the LISTEN_DESC delete_file_handler call.
(remote_prepare): New function with most of the TCP code from ...
(remote_open): ... here.  Detect PORT here unconditionally.  Move also
setting transport_is_reliable.
* server.c (run_once): New variable.
(gdbserver_usage): Document it.
(main): Set run_once for `--once'.  Call remote_prepare.  Exit after
the first run if RUN_ONCE.
* server.h (run_once, remote_prepare): New declarations.

gdb/testsuite/
* gdb.base/solib-disc.exp: Set gdbserver_reconnect_p.
* lib/gdb.exp (gdb_init): Clear gdbserver_reconnect_p.
* lib/gdbserver-support.exp (gdbserver_start): Add `--once' if
!gdbserver_reconnect_p..
(gdbserver_reconnect): Call error if !gdbserver_reconnect_p..

daily update

*** empty log message ***

Fix indexing of gdbserver section.

* gdb.texinfo (Server): Improve indexing.  Index all optional
switches to gdbserver.

Warn relocation in readonly section in a shared object.

2011-04-22  H.J. Lu  <hongjiu.lu@intel.com>

* elf32-i386.c (elf_i386_readonly_dynrelocs): Warn relocation
in readonly section in a shared object.
(elf_i386_size_dynamic_sections): Likewise.
* elf64-x86-64.c (elf_x86_64_readonly_dynrelocs): Likewise.
(elf_x86_64_size_dynamic_sections): Likewise.

*** empty log message ***

daily update

* descriptors.cc (set_close_on_exec): New function.
(Descriptors::open): Use set_close_on_exec.
* output.cc (S_ISLNK): Define if not defined.

* incremental.cc (Sized_incremental_binary::setup_readers): Allocate
global symbol map.
(Sized_incremental_binary::do_apply_incremental_relocs): New function.
(Sized_incr_relobj::do_add_symbols): Add symbols to global symbol map.
(Sized_incr_relobj::do_relocate): Remap section indices in incremental
relocations.
(Sized_incr_dynobj::do_add_symbols): Add symbols to global symbol map.
(Sized_incr_dynobj::do_for_all_global_symbols): Remove FIXME.
(Sized_incr_dynobj::do_for_all_local_got_entries): Likewise.
* incremental.h
(Incremental_inputs_reader::global_symbol_reader_at_offset): New
function.
(Incremental_binary::apply_incremental_relocs): New function.
(Incremental_binary::do_apply_incremental_relocs): New function.
(Sized_incremental_binary::Sized_incremental_binary): Initialize new
data member.
(Sized_incremental_binary::add_global_symbol): New function.
(Sized_incremental_binary::global_symbol): New function.
(Sized_incremental_binary::do_apply_incremental_relocs): New function.
(Sized_incremental_binary::symbol_map_): New data member.
* layout.cc (Layout_task_runner::run): Apply incremental relocations.
* target.h (Sized_target::apply_relocation): New function.
* target-reloc.h (apply_relocation): New function.
* x86_64.cc (Target_x86_64::apply_relocation): New function.

2011-04-22  Doug Kwan  <dougkwan@google.com>

* arm.cc (Arm_output_section::Arm_output_section): Set SHF_LINK_ORDER
flag of a SHT_ARM_EXIDX section.
        * testsuite/Makefile.am (arm_exidx_test): New test rules.
* testsuite/Makefile.in: Regenerate.
* testsuite/arm_exidx_test.s: New file.
* testsuite/arm_exidx_test.sh: Same.

* MAINTAINERS: Update my email address.

*** empty log message ***

daily update

Skip local IFUNC symbols when checking dynamic relocs in read-only sections.

bfd/

2011-04-21  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/12694
* elf32-i386.c (elf_i386_readonly_dynrelocs): Skip local IFUNC
symbols.
* elf64-x86-64.c (elf_x86_64_readonly_dynrelocs): Likewise.

ld/testsuite/

2011-04-21  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/12694
* ld-ifunc/ifunc-14-i386.d: New.
* ld-ifunc/ifunc-14-x86-64.d: Likewise.
* ld-ifunc/ifunc-14a.s: Likewise.
* ld-ifunc/ifunc-14b.s: Likewise.

Return false on dynamic symbol error.

2011-04-21  H.J. Lu  <hongjiu.lu@intel.com>

* elf32-i386.c (elf_i386_finish_dynamic_symbol): Return false
on dynamic symbol error.
* elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Likewise.

* gdb_wchar.h (USE_INTERMEDIATE_ENCODING_FUNCTION): New macro.
(INTERMEDIATE_ENCODING): Change value to intermediate_encoding
function call if __STDC_ISO_10646__ macro is defined.
(intermediate_encoding): New prototype.
* charset.c (your_gdb_wchar_t_is_bogus): New extern test variable
to generate compile time error for unsupported gdb_wchar_t size.
(ENDIAN_SUFFIX): New macro.
(intermediate_encoding): New function.

2011-04-21  Tristan Gingold  <gingold@adacore.com>

* scripttempl/alphavms.sc: Add dwarf2 embedding marks.

* rx-decode.opc (rx_decode_opcode): Set the syntax for multi-byte NOPs.
* rx-decode.c: Regenerate.

*** empty log message ***

daily update

gdb/
* ada-lang.c (struct add_partial_datum): Update the comment for
expand_partial_symbol_name.
(ada_add_partial_symbol_completions): Rename to ...
(ada_expand_partial_symbol_name): ... here, change return type, update
function comment, call symbol_completion_match instead of
symbol_completion_add.
(ada_make_symbol_completion_list): Use now expand_partial_symbol_names
and ada_expand_partial_symbol_name.
* dwarf2read.c (dw2_expand_symtabs_matching): Support NULL
FILE_MATCHER.
(dw2_map_symbol_names): Remove.
(dwarf2_gdb_index_functions): Unlist dw2_map_symbol_names.
* psymtab.c (map_symbol_names_psymtab): Remove.
(expand_symtabs_matching_via_partial): Support NULL FILE_MATCHER.
Support KIND == ALL_DOMAIN.  Exchange the NAME_MATCHER and KIND check
order.
(psym_functions): Unlist map_symbol_names_psymtab.
(map_partial_symbol_names): Rename to ...
(expand_partial_symbol_names): ... here, change the FUN type, call
expand_symtabs_matching with ALL_DOMAIN and NULL FILE_MATCHER now.
* psymtab.h (map_partial_symbol_names): Rename to ...
(expand_partial_symbol_names): ... here, change the FUN type.
* symfile.h (struct quick_symbol_functions): Update the description of
expand_symtabs_matching.  Remove map_symbol_names.
* symtab.c (search_symbols): Add ALL_DOMAIN to the function comment.
(struct add_name_data): Update the comment for
expand_partial_symbol_name.
(add_partial_symbol_name): Rename to ...
(expand_partial_symbol_name): ... here.  Replace
completion_list_add_name call by strncmp.
(default_make_symbol_completion_list_break_on): Use now
expand_partial_symbol_names and expand_partial_symbol_name.
* symtab.h (enum search_domain): New element ALL_DOMAIN.

gdb/testsuite/
* gdb.cp/cpcompletion.exp (complete class methods)
(complete class methods beginning with F): Move them above runto.  New
comment about the runto delimiter.

merge from gcc

PR gold/12689
* archive.h (Incremental_archive_entry::Archive_member):
Initialize arg_serial_ (second constructor).

gdb
* dwarf2read.c (save_gdb_index_command): Replace format
documentation with a pointer to the manual.
gdb/doc
* gdb.texinfo (Index Section Format): New node.
(Top): Add new node to menu.

2011-04-20  Pedro Alves  <pedro@codesourcery.com>

gdb/
* regcache.c: Include remote.h.
(enum regcache_dump_what) <regcache_dump_remote>: New enum value.
(regcache_dump): Handle regcache_dump_remote.
(maintenance_print_remote_registers): New function.
(_initialize_regcache): Install "maint print remote-registers"
command.
* remote.c (map_regcache_remote_table): New function, factored out
from ...
(init_remote_state): ... here.
(remote_register_number_and_offset): New.
* remote.h (remote_register_number_and_offset): Declare.

gdb/doc/
* gdb.texinfo (Maintenance Commands): Document `maint print
remote-registers'.

2011-04-20  Pedro Alves  <pedro@codesourcery.com>

gdb/
* regcache.c (get_thread_arch_regcache): If creating a regcache for
null_ptid, assume and allow a NULL address space, instead of
asking the target for the ptid's address space.
* infrun.c (ptid_is_pid): Remove assertion.

gdb/testsuite/
* gdb.base/maint.exp: Test that "maint print registers" works
without a running program.

2011-04-20  Catherine Moore  <clm@codesourcery.com>
            David Ung <davidu@mips.com>

* config/mips.c (mips_cl_insn): Add new field complete_p.
(create_insn): Initialize complete_p to zero.
(BASE_REG_EQ): New.
(fix_24k_align_to): New.
(fix_24k_store_info): Declare.
(fix_24k_sort): New.
(fix_24k_record_store_info): New.
(nops_for_24k): New.
(nops_for_insn): Call nops_for_24k.
(append_insn): Move O_constant expression handling.

2011-04-20  Catherine Moore  <clm@codesourcery.com>
            David Ung <davidu@mips.com>

* gas/mips/24k-branch-delay-1.d: New.
* gas/mips/24k-branch-delay-1.s: New.
* gas/mips/24k-triple-stores-1.d: New.
* gas/mips/24k-triple-stores-1.s: New.
* gas/mips/24k-triple-stores-2.d: New.
* gas/mips/24k-triple-stores-2.s: New.
* gas/mips/24k-triple-stores-3.d: New.
* gas/mips/24k-triple-stores-3.s: New.
* gas/mips/24k-triple-stores-4.s: New.
* gas/mips/24k-triple-stores-4.d: New.
* gas/mips/24k-triple-stores-5.d: New.
* gas/mips/24k-triple-stores-5.s: New.
* gas/mips/24k-triple-stores-6.d: New.
* gas/mips/24k-triple-stores-6.s: New.
* gas/mips/24k-triple-stores-7.d: New.
* gas/mips/24k-triple-stores-7.s: New.
* gas/mips/24k-triple-stores-8.d: New.
* gas/mips/24k-triple-stores-8.s: New.
* gas/mips/24k-triple-stores-9.d: New.
* gas/mips/24k-triple-stores-9.s: New.
* gas/mips/24k-triple-stores-10.d: New.
* gas/mips/24k-triple-stores-10.s: New.
* gas/mips/24k-triple-stores-11.d: New.
* gas/mips/24k-triple-stores-11.s: New.
* gas/mips/mips.exp: Invoke new tests.

Fix racy tests in gdb.base/setshow.exp

Regenerate i386-init.h.

2011-04-20  H.J. Lu  <hongjiu.lu@intel.com>

* i386-init.h: Regenerated.

2011-04-20  Tristan Gingold  <gingold@adacore.com>

* config.bfd (alpha*-*-*vms*, ia64*-*-*vms*): Define targ_selvecs.

2011-04-20  Tristan Gingold  <gingold@adacore.com>

        * emultempl/aix.em (_add_options): Ignore -bbigtoc switch.

* gdb.texinfo (Trace File Format): Move node later.

bfd/
* hash.c (bfd_default_hash_table_size): Make it an unsigned long.
(bfd_hash_table_init_n): Overflow checking.
(bfd_hash_set_default_size): Return current size.  Take unsigned long
arg.  Add 65537 to hash_size primes.
* bfd-in.h (bfd_hash_set_default_size): Update prototype.
* bfd-in2.h: Regenerate.
gas/
* hash.c (set_gas_hash_table_size): Use bfd_hash_set_default_size.
(hash_new_sized): New function, split out from..
(hash_new): ..here.
ld/
* ld.h (ld_config_type <hash_table_size>): Make it an unsigned long.

* bootstrap-lto.mk: Remove obsolete requirement.

bfd/
* elf-bfd.h (RELOC_AGAINST_DISCARDED_SECTION): Fix +1 overrun of
memmove elements.

* libbfd.c (bfd_log2): Do return rounded up value.
* elflink.c (bfd_elf_size_dynsym_hash_dynstr): Replace bfd_log2
call with expanded old round down version of the function.

* archive.c (_bfd_get_elt_at_filepos): Don't release n_nfd.
* elflink.c (elf_link_add_object_symbols): Delete redundant code.

PR ld/12365
bfd/
* elfcode.h (elf_slurp_symbol_table): Put common plugin IR symbols
in their own common section.
* elflink.c (elf_link_add_object_symbols): Likewise.
* linker.c (generic_link_check_archive_element): Don't lose flags
if common section is pre-existing.
(_bfd_generic_link_add_one_symbol): Likewise.
ld/
* ldfile.c (ldfile_try_open_bfd): Move code creating and switching
to plugin IR BFD..
* ldmain.c (add_archive_element): ..and similar code here..
* plugin.c (plugin_maybe_claim): ..to here.  New function.
(plugin_call_claim_file): Make static.
(asymbol_from_plugin_symbol): Set ELF st_shndx for common syms.
(plugin_multiple_common): New function.
(plugin_call_all_symbols_read): Hook in plugin_multiple_common.
* plugin.h (plugin_call_claim_file): Don't declare.
(plugin_maybe_claim): Declare.

PR ld/12365
include/
* bfdlink.h (struct bfd_link_callbacks): Modify multiple_definition
and multiple_common parameters to pass in a bfd_link_hash_entry
pointer rather than name,bfd etc. found in the hash entry.
bfd/
* elflink.c (_bfd_elf_merge_symbol): Update multiple_common calls.
* linker.c (_bfd_generic_link_add_one_symbol): Likewise.  Call
multiple_definition regardless of allow_multiple_definition.
* simple.c (simple_dummy_multiple_definition): Update.
* xcofflink.c (xcoff_link_add_symbols): Update multiple_definition
calls.
ld/
* ldmain.c (multiple_definition): Take a bfd_link_hash_entry
pointer arg rather than "name", "obfd", "osec", "oval".  Add code
removed from linker.c.  Hack around xcofflink.c oddity in
passing NULL nbfd.
(multiple_common): Similarly.
* plugin.c (orig_allow_multiple_defs): Delete.
(plugin_call_all_symbols_read): Don't twiddle allow_multiple_definition.
(plugin_multiple_definition): Update.

daily update

*** empty log message ***

* i386-gen.c (cpu_flag_init): Remove 3dnow and 3dnowa bits
from bdver1 flags.

gdb
* windows-tdep.c (windows_xfer_shared_library):
* windows-nat.c (get_module_name, windows_make_so):
* v850-tdep.c (v850_handle_pushm):
* utils.c (null_cleanup, gdb_realpath):
* ui-out.c (get_next_header):
* tracepoint.c (clear_traceframe_info):
* symtab.c (lookup_symtab):
* serial.h (struct serial_ops):
* mipsread.c (read_alphacoff_dynamic_symtab):
* infcmd.c (print_return_value):
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address):
* f-exp.y (parse_number):
* exceptions.c (catch_exceptions):
* dummy-frame.c (dummy_frame_this_id):
* defs.h (struct cleanup):
* breakpoint.c (disable_breakpoints_in_unloaded_shlib):
* arm-tdep.c (arm_push_dummy_call):
* amd64-tdep.h (amd64_collect_xsave):
* amd64-tdep.c (amd64_collect_xsave):
* alpha-tdep.c (alpha_heuristic_frame_unwind_cache):
* README (typing): Remove duplicate words.
* cli/cli-decode.c (lookup_cmd_composition): Add comma.
* infrun.c (siginfo_value_read): Fix typo.
* solib-frv.c (frv_fdpic_find_global_pointer): Likewise.
* top.c (source_line_number): Add comma.
gdb/doc
* gdbint.texinfo (Register Information Functions): Remove
duplicate "the".
* gdb.texinfo (Emacs): Remove duplicate "to".
(GDB/MI Variable Objects): Remove duplicate "the".
(General Query Packets): Likewise.
gdb/testsuite
* gdb.mi/mi-nsmoribund.exp:
* gdb.hp/gdb.objdbg/objdbg01.exp:
* gdb.base/structs.exp (test_struct_returns):
* gdb.base/call-sc.exp (test_scalar_returns):
* gdb.base/bigcore.exp: Remove duplicate words.
gdb/gdbserver
* win32-low.c (handle_load_dll): Remove duplicate "the".

Remove the unused ld-plugin/plugin-ignore.d.

2011-04-19  H.J. Lu  <hongjiu.lu@intel.com>

* ld-plugin/plugin-ignore.d: Removed.

2011-04-19  Marc Khouzam  <marc.khouzam@ericsson.com>

* thread.c (any_live_thread_of_process): Prioritize threads
that are not executing.
* gdbthread.h (any_live_thread_of_process): Update comment
as per above change.

* xcoffread.c (process_xcoff_symbol): Remove useless cast.
(scan_xcoff_symtab): Likewise.

* xcoffread.c (process_xcoff_symbol): ARI fix: Avoid assignment
inside if clause.

* xstormy16-tdep.c (xstormy16_push_dummy_call): Add local
variables to simplify code and avoid == operator at end of
line as this is against GNU coding standards.

* solib-svr4.c (svr4_keep_data_in_core): Rename local variable
lm_name to name_lm to avoid conflict with lm_name function.

ARI fixes: Use only lowercase function name for static functions.
* nto-tdep.c (LM_ADDR): Rename to...
(lm_addr): New function name.
(nto_relocate_section_addresses): Adapt to change above.
* solib-sunos.c (LM_ADDR): Rename to...
(lm_addr): New function name.
(LM_NEXT): Rename to...
(lm_next): New function name.
(sunos_current_sos, sunos_relocate_section_addresses): Adapt to
function name changes above.
* solib-svr4.c (LM_ADDR_FROM_LINK_MAP): Rename to...
(lm_addr_from_link_map): New function name.
(HAS_LM_DYNAMIC_FROM_LINK_MAP): Rename to...
(has_lm_dynamic_from_link_map): New function name.
(LM_DYNAMIC_FROM_LINK_MAP): Rename to...
(lm_dynamic_from_link_map): New function name.
(LM_ADDR_CHECK): Rename to...
(lm_addr_check): New function name.
(LM_NEXT): Rename to...
(lm_next): New function name.
(LM_PREV): Rename to...
(lm_prev): New function name.
(LM_NAME): Rename to...
(lm_name): New function name.
(IGNORE_FIRST_LINK_MAP_ENTRY): Rename to...
(ignore_first_link_map_entry): New function name.
(svr4_keep_data_in_core): Adapt to function name changes above.
(svr4_current_sos): Likewise.
(enable_break): Likewise.
(svr4_relocate_section_addresses): Likewise.

* config/tc-arm.c (v7m_psrs): Revert previous delta.

* gas/arm/mrs-msr-thumb-v7e-m.s: Restore name of basepri_max
register.
* gas/arm/mrs-msr-thumb-v7e-m.d: Likewise.
* gas/arm/arch7.d: Likewise.
* gas/arm/arch7.s: Likewise.

* arm-dis.c: Revert previous reversion.

* gas/arm/arch7.s: Fix typo basepri_max should be basepri_mask.
* gas/arm/mrs-msr-thumb-v7e-m.s: Likewise.
* gas/arm/arch7.d: Update expected disassembly.
* gas/arm/attr-march-armv7.d: Remove Microcontroller tag.
* gas/arm/blx-bad.d: Only run for ELF based targets.
* gas/arm/mrs-msr-thumb-v6t2.d: Likewise.
* gas/arm/vldm-arm.d: Likewise.
* gas/arm/mrs-msr-thumb-v7-m.d: Likewise.
Remove qualifiers from PSR and IAPSR regsiter names.
* gas/arm/mrs-msr-thumb-v7e-m.d: Likewise.
* gas/arm/thumb2_bcond.d: Update expected disassembly to allow for
relaxing of branch insns.
* gas/arm/thumb32.d: Fix whitespace problems in disassembly.

* config/tc-arm.c (parse_psr): Use selected_cpu not cpu_variant to
detect M-profile targets.
(do_t_swi): Exclude v7 and higher variants from arm_ext_os test.
(v7m_psrs): Fix typo: basepri_max should be basepri_mask.

* arm-dis.c (psr_name): Revert previous delta.

* arm.h (ARM_AEXT_V7_ARM): Remove ARM_EXT_OS from bitmask.

ARI cleanup.
* xtensa-tdep.c (xtensa_register_type): Use xstrprintf instead of
sprintf. Simplify code and avoid loosing memory.
(xtensa_register_reggroup_p): Extract assignment out of IF clause.
(call0_frame_cache): Remove && operator from end of line.

*** empty log message ***

daily update

Update expected LTO linker errors for GCC 4.6.

2011-04-18  H.J. Lu  <hongjiu.lu@intel.com>

* ld-plugin/plugin-7.d: Update expected LTO linker errors for
GCC 4.6.
* ld-plugin/plugin-8.d: Likewise.

2011-04-18  Kai Tietz  <ktietz@redhat.com>

        * deffilep.y (def_aligncomm): Avoid duplets.

2011-04-18  Kai Tietz  <ktietz@redhat.com>

* deffilep.y (def_pool_str): New type.
(pool_strs): Local static.
(def_pool_alloc): Local function.
(def_pool_strdup): Likewise.
(def_pool_free): Likewise.
(opt_name): Replace xmalloc/xstrdup by
def_pool_alloc/def_pool_strdup.
(dot_name): Likewise.
(anylang_id): Likewise.
(def_lex): Likewise.
(def_file_parse): Call def_pool_free on
exit and cleanup directives elements.
(def_file_add_directive): Call def_pool_free.

2011-04-18  Tristan Gingold  <gingold@adacore.com>

* coff-rs6000.c: Convert to ISO-C.  Remove PARAMS macro.

2011-04-18  Tristan Gingold  <gingold@adacore.com>

* gas/macros/app1.s: Export symbol
* gas/macros/app2.s: Ditto
* gas/macros/app3.s: Ditto
* gas/macros/app4.s: Ditto
* gas/macros/app4b.s: Ditto
* gas/macros/app1.d: Adjust.
* gas/macros/app2.d: Ditto.
* gas/macros/app3.d: Ditto.
* gas/macros/app4.d: Ditto.

2011-04-18  Tristan Gingold  <gingold@adacore.com>

* lib/gas-defs.exp (get_standard_section_names): Add names for
alpha vms.
* gas/all/gas.exp: Do not test diff1.s on alpha-vms.

2011-04-18  Paul Brook  <paul@codesourcery.com>

ld/
* emulparams/elf32_tic6x_le.sh: Define OTHER_READONLY_SECTIONS
for unwinding tables.

* object.cc (Relocate_info::location): Simplify location string.
* errors.cc (Errors::error_at_location): Don't print program
name.
(Errors::warning_at_location): Likewise.
(Errors::undefined_symbol): Likewise.
* testsuite/debug_msg.sh: Update accordingly.

*** empty log message ***