Peter Korsgaard [Thu, 20 Dec 2018 09:44:05 +0000 (10:44 +0100)]
Update for 2018.08.4
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit
348d79a331d30a4f547827c71f75d9d4da7aab82)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Wed, 19 Dec 2018 22:34:13 +0000 (23:34 +0100)]
docs/website: update for 2018.11.1
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Wed, 19 Dec 2018 22:04:07 +0000 (23:04 +0100)]
Update for 2018.11.1
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit
29675f8e54d36660a7c0a0c3b54b9cc612395e9a)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Asaf Kahlon [Tue, 18 Dec 2018 17:24:07 +0000 (19:24 +0200)]
package/python-autobahn: bump to version 18.12.1
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
James Hilliard [Tue, 18 Dec 2018 20:44:32 +0000 (04:44 +0800)]
package/weston: bump to version 5.0.0
removes rdp-compositor: fix compilation against FreeRDP 2.0.0 rc2
backport which is now included in 5.0.0
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Korsgaard [Tue, 18 Dec 2018 09:11:06 +0000 (10:11 +0100)]
swupdate: ensure TARGET_CC is used for compiling/linking
Fixes:
http://autobuild.buildroot.net/results/
e302d0edb59ff7617b5f2d21f06eb65ae04981fe
http://autobuild.buildroot.net/results/
dbb69acadc20b4bb559311348eca276c1e6343f7
Swupdate uses $CROSS-cc instead of $CROSS-gcc, which is not available in all
external toolchains, and use CC for linking. Ensure TARGET_CC is used for both.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Francois Perrad [Sun, 16 Dec 2018 20:19:06 +0000 (21:19 +0100)]
package/wsapi-xavante: bump to version 1.7
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sun, 16 Dec 2018 20:19:05 +0000 (21:19 +0100)]
package/wsapi-fcgi: bump to version 1.7
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sun, 16 Dec 2018 20:19:04 +0000 (21:19 +0100)]
package/wsapi: bump to version 1.7
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sun, 16 Dec 2018 20:19:03 +0000 (21:19 +0100)]
package/lua-periphery: bump to version 1.1.1
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Thu, 13 Dec 2018 18:54:33 +0000 (19:54 +0100)]
package/netsurf: make sure host libpng can be found
Commit
42c8f9f6b46e196a7c337c683a7df5ae6bd421b2 ("package/netsurf: add
dependency on host-libpng for sdl") ensured host-libpng was built
prior to netsurf when the SDL backend is selected. However, this is
not sufficient for the netsurf build system to find libpng on the
host, we need to help by providing the right HOST_CFLAGS and
HOST_LDFLAGS.
Fixes:
http://autobuild.buildroot.net/results/
d0bbd563fe5c9463316b2ba0d7ef5553be0563bc/
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas: rewrite commit message.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Asaf Kahlon [Sat, 15 Dec 2018 08:37:23 +0000 (10:37 +0200)]
package/python-engineio: bump to version 3.1.0
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Sat, 15 Dec 2018 22:00:50 +0000 (23:00 +0100)]
package/liblo: fix stringop-truncation error with gcc 8
Fixes:
- http://autobuild.buildroot.org/results/
62896bd6a1a30facaffd07a7a763831996dc8ea0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Wed, 12 Dec 2018 07:14:55 +0000 (08:14 +0100)]
package/netsurf: turn libcurl into an optional dependency
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Wed, 12 Dec 2018 07:14:54 +0000 (08:14 +0100)]
package/netsurf: add GTK+ 3 frontend
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Wed, 12 Dec 2018 07:14:53 +0000 (08:14 +0100)]
package/netsurf: enable javascript with duktape
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Wed, 12 Dec 2018 07:14:52 +0000 (08:14 +0100)]
package/netsurf: add optional dependency on freetype
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Julien Olivain [Sat, 15 Dec 2018 18:11:29 +0000 (19:11 +0100)]
configs/csky_gx6605s: bump gcc to 6.3.0, kernel to 4.9.56
This patch updates the csky custom external toolchain to fix a broken
host dependency of gdb on libexpat.so.0 (most hosts now ship
libexpat.so.1). gdb is required to copy and and boot the kernel (see
board/csky/readme.txt). The updated gdb no longer has this host
dependency, which solves the issue.
Since this external toolchain was built and tested with csky kernel
4.9.56, this patch also updates to that kernel version.
Finally, this 4.9.56 csky kernel changed its default bootargs. So we
add a patch to preserve the same behavior as the previous version.
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Asaf Kahlon [Sun, 16 Dec 2018 19:46:32 +0000 (21:46 +0200)]
package/libuv: bump to version 1.24.1
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Jörg Krause [Sun, 16 Dec 2018 16:41:29 +0000 (17:41 +0100)]
package/augeas: bump to version 1.11.0
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Wed, 2 May 2018 18:33:36 +0000 (20:33 +0200)]
package/libgdiplus: bump to version 5.6
As part of this bump, we backport two upstream patches that fix the
license text to really reflect the license of the project. The second
patch was prompted by a bug report made by Arnout Vandecappelle
(https://github.com/mono/libgdiplus/issues/375), following a
discussion on the Buildroot mailing list. The first patch is needed as
a dependency of this first patch. Since both patches are upstream,
they can be dropped during the next version bump.
So now, the license text is the one of the MIT license, which matches
the header comments in all source files, making the comment about the
<pkg>_LICENSE variable in libgdiplus.mk irrelevant. The hash of the
license file is updated as well.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: update licensing aspects.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Grzegorz Blach [Sat, 15 Dec 2018 00:19:24 +0000 (01:19 +0100)]
package/python-pigpio: fix upstream URL address
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Grzegorz Blach [Sat, 15 Dec 2018 00:19:23 +0000 (01:19 +0100)]
package/python-pigpio: bump to version 1.42
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Grzegorz Blach [Sat, 15 Dec 2018 00:19:22 +0000 (01:19 +0100)]
package/pigpio: bump to version 68
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Carlos Santos [Sat, 15 Dec 2018 01:38:13 +0000 (23:38 -0200)]
package/pcm-tools: fix build with GCC 4.8.2
Add "-std=c++11" to CXXFLAGS, forcing C++ 2011 standard (it's
experimental in GCC 4.8.2 but goot enough to build pcm-tools).
Fixes:
http://autobuild.buildroot.net/results/
cf3c79f0c94be8a184d532570bdb1893090316a3/
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Naour [Sat, 15 Dec 2018 12:10:45 +0000 (13:10 +0100)]
package/linux-headers: aarch64_be is not supported by kernel version 3.2
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas Petazzoni [Sun, 16 Dec 2018 15:14:56 +0000 (16:14 +0100)]
.gitlab-ci.yml: regenerate for proper defconfig ordering
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adam Duskett [Sat, 15 Dec 2018 21:13:05 +0000 (16:13 -0500)]
package/qemu: bump to version 3.1.0
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Jagan Teki [Sat, 3 Nov 2018 12:56:08 +0000 (18:26 +0530)]
configs/orangepi_lite2: add WiFi support
Orangepi lite2 board has AP6356S WiFi/BT combo, but does
not have ethernet port. So it makes sense to enable wireless
networking by default:
- add broadcom wireless firmware package to image
- add basic wireless tools to image
- add rootfs overlay with proper NVRAM file for on-board AP6356S chip
- add mdev to image to enable module autoloading
- update readme.txt to test wifi
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Jagan Teki [Sat, 3 Nov 2018 12:56:07 +0000 (18:26 +0530)]
configs/orangepi_lite2: new defconfig
Add initial support for Orangepi Lite2 board with below features:
- U-Boot 2018.09
- Linux 4.19.0-rc8
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Jagan Teki [Sat, 3 Nov 2018 12:56:06 +0000 (18:26 +0530)]
configs/orangepi_one_plus: new defconfig
Add initial support for Orangepi One Plus board with below features:
- U-Boot 2018.09
- Linux 4.19.0-rc8
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Arnout Vandecappelle (Essensium/Mind) [Fri, 16 Feb 2018 15:21:25 +0000 (16:21 +0100)]
package/libpagekite: new package
libpagekite is a C implementation of the backend of the PageKite relay
protocol. It allows external access to embedded devices without public
IP address.
There is a bundled version of libev but we prefer to use the global
libev library.
Although the configure script has a --without-openssl option, it
doesn't actually build without openssl.
Patch 0001-configure.ac-fix-handling-of-with.patch is needed because
we want to explicitly pass --with and --without options, even if they
are the default. The way the AC_ARG_WITH macros were used, --with and
--without both had the effect of enabling the option.
Patch 0002-configure.ac-use-AS_HELP_STRING-for-with-openssl.patch is
not needed for Buildroot, but it is part of the same upstream PR and
would generate a conflict for the next patch.
Patch 0003-configure.ac-use-pkg-config-for-openssl.patch is needed to
pass -lz (needed by openssl) in static compilation.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
[Thomas:
- As noticed by Romain Naour, fix the prompt of the package in the
Config.in
- Add entry to DEVELOPERS file
- Drop the dependency on BR2_bfin, since this architecture has been
dropped from Buildroot.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Sat, 15 Dec 2018 14:31:07 +0000 (15:31 +0100)]
package/hostapd: bump version to 2.7
Added license hash, removed patches included in new version.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Sat, 15 Dec 2018 14:31:06 +0000 (15:31 +0100)]
package/wpa_supplicant: bump version to 2.7
Removed upstream patches included in the new version.
Added upstream patch to fix build error.
Updated license hash after commit
http://w1.fi/cgit/hostap/commit/README?id=
c2c6c01bb8b6fafc2074b46a53c4eab2c145ac6f
updated the copyright year.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Korsgaard [Sat, 15 Dec 2018 15:25:59 +0000 (16:25 +0100)]
package/docker-compose: add patch to allow recent 2.x releases of python-requests
setup.py explicitly listed a maximum allowed version of python-requests,
causing runtime failures with the python-requests version we have:
Loaded image: docker-enp.bin.cloud.barco.com/eis/baseos-docker-snmp:0.1.0
Traceback (most recent call last):
File "/usr/bin/docker-compose", line 6, in <module>
from pkg_resources import load_entry_point
File "usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3123, in <module>
File "usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3107, in _call_aside
File "usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3136, in _initialize_master_working_set
File "usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 580, in _build_master
File "usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 593, in _build_from_requirements
File "usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 781, in resolve
pkg_resources.DistributionNotFound: The 'requests!=2.11.0,!=2.12.2,!=2.18.0,<2.19,>=2.6.1' distribution was not found and is required by docker-compose
FAIL
Upstream regularly updates setup.py as new python-requests releases are
made, but it is unknown why new python-requests releases (which are supposed
to be backwards compatible) should not be allowed right away.
Add a path submitted upstream to only disallow new major versions, similar
to how the other dependencies are handled.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Korsgaard [Sat, 15 Dec 2018 15:50:10 +0000 (16:50 +0100)]
package/go: security bump to version 1.11.4
go 1.11.3 fixes the following security issues:
cmd/go: remote command execution during "go get -u"
The issue is CVE-2018-16873 and Go issue golang.org/issue/29230. See the Go issue for details.
Thanks to Etienne Stalmans from the Heroku platform security team for discovering and reporting this issue.
cmd/go: directory traversal in "go get" via curly braces in import paths
The issue is CVE-2018-16874 and Go issue golang.org/issue/29231. See the Go issue for details.
Thanks to ztz of Tencent Security Platform for discovering and reporting this issue.
crypto/x509: CPU denial of service in chain validation
The issue is CVE-2018-16875 and Go issue golang.org/issue/29233. See the Go issue for details.
Thanks to Netflix for discovering and reporting this issue.
go 1.11.4 fixes issues, including regressions introduced by 1.11.3:
1.11.4 includes fixes to cgo, the compiler, linker, runtime, documentation, go
command, and the net/http and go/types packages. It includes a fix to a bug
introduced in Go 1.11.3 that broke go get for import path patterns
containing "...".
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
James Hilliard [Sun, 16 Dec 2018 08:58:34 +0000 (16:58 +0800)]
package/{mesa3d, mesa3d-headers}: bump version to 18.3.1
Backport patch needed to fix error: ‘NULL’ undeclared
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Korsgaard [Sat, 15 Dec 2018 21:00:31 +0000 (22:00 +0100)]
package/xen: security bump to version 4.11.1
The 4.11.1 release brings a large number of fixes:
https://xenproject.org/downloads/xen-archives/xen-project-411-series/xen-4111.html
Including a number of security fixes:
XSA-268: Use of v2 grant tables may cause crash on ARM (CVE-2018-15469)
XSA-269: x86: Incorrect MSR_DEBUGCTL handling lets guests enable BTS
(CVE-2018-15468)
XSA-272: oxenstored does not apply quota-maxentity (CVE-2018-15470)
XSA-273: L1 Terminal Fault speculative side channel (CVE-2018-3620,
CVE-2018-3646)
XSA-275: insufficient TLB flushing / improper large page mappings with AMD
IOMMUs
XSA-276: resource accounting issues in x86 IOREQ server handling
XSA-277: x86: incorrect error handling for guest p2m page removals
XSA-278: x86: Nested VT-x usable even when disabled (CVE-2018-18883)
XSA-279: x86: DoS from attempting to use INVPCID with a non-canonical
addresses
XSA-280: Fix for XSA-240 conflicts with shadow paging
XSA-282: guest use of HLE constructs may lock up host
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sun, 16 Dec 2018 08:56:56 +0000 (09:56 +0100)]
luasql-sqlite3: bump to version 2.4.0
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sun, 16 Dec 2018 08:56:55 +0000 (09:56 +0100)]
luaossl: bump to version
20181207
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sun, 16 Dec 2018 08:56:54 +0000 (09:56 +0100)]
luaexpat: bump to version 1.3.3
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sun, 16 Dec 2018 08:56:53 +0000 (09:56 +0100)]
lua-stdlib: bump to version 41.2.2
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sun, 16 Dec 2018 08:56:52 +0000 (09:56 +0100)]
lua-lpeg-patterns: bump to version 0.5
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sun, 16 Dec 2018 08:56:51 +0000 (09:56 +0100)]
lua-datafile: bump to version 0.6
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sun, 16 Dec 2018 08:56:50 +0000 (09:56 +0100)]
lua-curl: bump to version 0.3.8
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sun, 16 Dec 2018 08:56:49 +0000 (09:56 +0100)]
lua-cjson: bump to version 2.1.0.6
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sun, 16 Dec 2018 08:56:48 +0000 (09:56 +0100)]
lsqlite3: bump to version 0.9.5
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sun, 16 Dec 2018 08:56:47 +0000 (09:56 +0100)]
coxpcall: bump to version 1.17.0
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sun, 16 Dec 2018 08:56:46 +0000 (09:56 +0100)]
cgilua: bump to version 5.2.1
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sun, 16 Dec 2018 08:56:45 +0000 (09:56 +0100)]
argparse: bump to version 0.6.0
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Matt Weber [Thu, 6 Dec 2018 02:06:29 +0000 (20:06 -0600)]
system cfg: remove mkpasswd MD5 format option
As SHA256 is now default, removing weak MD5 option. C libraries now
all support the SHA methods.
glibc 2.7+
uclibc (
bdd8362a88 package/uclibc: defconfig: enable sha-256...)
musl 1.1.14+
One issue this would prevent, is a host tool issue with a FIPS enabled
system where weak ciphers/methods are disabled. It seems the crypt(3)
call is impacted by /proc/sys/crypto/fips_enabled (per crypt(3) man
page). It results in mkpasswd returning "(EPERM) crypt failed."
Rather then create a Buildroot host dependency check, this patch
removes the potential corner case from being selected.
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Matt Weber [Thu, 6 Dec 2018 02:06:28 +0000 (20:06 -0600)]
system cfg: set mkpasswd default to SHA256
This patch changes the default mkpasswd method to SHA256 from MD5.
The change both improves the quality of the hash used and prepares
for eventually removing MD5 as a option.
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Matt Weber [Thu, 6 Dec 2018 02:06:27 +0000 (20:06 -0600)]
system cfg: update mkpasswd SHA option txt
This patch drops the comment about checking the C libraries version as
they now all support it by default
glibc 2.7+
uclibc (
bdd8362a88 package/uclibc: defconfig: enable sha-256...)
musl 1.1.14+
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ezequiel Garcia [Mon, 12 Nov 2018 18:19:28 +0000 (15:19 -0300)]
ci20: Fix U-Boot build with codesourcery toolchain
Currently, U-Boot is failing to build, due to some issues
with the toolchain and the U-Boot port.
Fix it.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Tue, 11 Dec 2018 14:28:51 +0000 (15:28 +0100)]
package/libgtk3: don't use pkgconf directly for host build
The build of host-libgtk3 calls $(HOST_DIR)/bin/pkgconf directly,
assuming that it will return correct results when building host
tools. It did work in practice without per-package directories, but is
not how pkg-config is used for host build in general: we recommend to
use $(HOST_DIR)/bin/pkg-config and we have in $(HOST_MAKE_ENV) a
number of environment variables that tell pkg-config to return results
relevant for host builds.
With per-package directories, calling $(HOST_DIR)/bin/pkgconf fails
badly, because it searches for .pc files in the per-package directory
of host-pkgconf itself, which obviously is empty.
So, we switch to using $(HOST_MAKE_ENV) $(PKG_CONFIG_HOST_BINARY),
which uses the regular pkg-config with the right environment
variables.
This allows the build of host-libgtk3 to find gdk-pixbuf-2.0 and
gio-2.0 built for the host, even in the context of
BR2_PER_PACKAGE_DIRECTORIES=y.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Titouan Christophe [Tue, 11 Dec 2018 09:21:06 +0000 (10:21 +0100)]
package/mosquitto: make broker optional
The mosquitto package provides both the MQTT client library and
a broker, and the latter may be not needed (when connecting to
a remote broker). It should be therefore possible to not install and
start it on the target
Also remove the dependency on BR2_TOOLCHAIN_HAS_SYNC_4, as it does not seem
to be needed. Verified with:
* br-m68k-68040-full.config [OK]
* br-sparc-uclibc.config [OK]
The original issue adding the dependency in commit
874d0784bb23d
(package/mosquito: needs sync_4) unfortunately refers to autobuilder results
that are no longer available.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
[Peter: extend commit message, fix comment line, remove indentation in .mk]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Tue, 11 Dec 2018 13:21:22 +0000 (15:21 +0200)]
package/libssh: bump to version 0.8.5
Cc: Scott Fan <fancp2007@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Eric Le Bihan [Tue, 11 Dec 2018 07:18:59 +0000 (08:18 +0100)]
package/eudev: fix build with kernel < 3.11
As explained in issue 6267 of systemd [1], Linux < 3.11 does not provide
definitions for BTN_DPAD_{UP,RIGHT}, which were introduced in [2].
So, add a patch to fix this issue.
[1] https://github.com/systemd/systemd/pull/6267
[2] https://github.com/torvalds/linux/commit/
9ee27487127461b5cf71670b708ed5b2b8da568c
Fixes:
- http://autobuild.buildroot.net/results/
e9d94084be8ed3296ba63cffdb9d69ffcc3b7140/
- http://autobuild.buildroot.net/results/
d9c5ec07bfbde1fab62991bb509c2f90af1cb3f4/
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Fri, 14 Dec 2018 21:25:51 +0000 (22:25 +0100)]
package/vdr-plugin-vnsiserver: fix build with pkgconf 1.5.3
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
vdr-plugin-vnsiserver uses the locdir variable from vdr.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the LOCDIR to use
explicitly instead of relying on vdr.pc.
Fixes:
- http://autobuild.buildroot.org/results/
9be3719f7b2137a5f039f3c4209c3bc7edeae2b4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Fri, 14 Dec 2018 15:54:35 +0000 (16:54 +0100)]
package/alsa-utils: fix systemd build with pkgconf 1.5.3
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
alsa-utils uses the systemdsystemunitdir variable from systemd.pc to
decide where to install things. Since DESTDIR is prepended to the
install destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the
systemdsystemunitdir to use explicitly instead of relying on systemd.pc.
Fixes:
- http://autobuild.buildroot.org/results/
d8ad140ae52b4fe8e153de3835f3f17e92b58e53
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Joel Stanley [Thu, 13 Dec 2018 23:15:32 +0000 (09:45 +1030)]
package/linux-firmware: install all Qlogic QED binaries
There are various versions shipped in linux-firmware. In the past we
decided that it was up to the developer to filter out the ones they want
for their specific kernel version, so install them all.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Jörg Krause [Fri, 14 Dec 2018 06:36:07 +0000 (07:36 +0100)]
package/luvi: add upstream patch to fix runtime issue with CMake 3.12+
luvi fails to run when it was build with CMake 3.12+:
```
[string "return require('init')(...)"]:1: module 'init' not found:
no field package.preload['init']
no file './init.lua'
no file '/usr/share/luajit-2.0.5/init.lua'
no file '/usr/local/share/lua/5.1/init.lua'
no file '/usr/local/share/lua/5.1/init/init.lua'
no file '/usr/share/lua/5.1/init.lua'
no file '/usr/share/lua/5.1/init/init.lua'
no file './init.so'
no file '/usr/local/lib/lua/5.1/init.so'
no file '/usr/lib/lua/5.1/init.so'
no file '/usr/local/lib/lua/5.1/loadall.so'
```
Looking at link.txt for the luvi executable shows that `-rdynamic` is
not set anymore in CMake 3.12. This has the effect, that symbols are
missing in the `.dynsym` section in the binary.
The patch, sets `ENABLE_EXPORTS` to true in CMakeLists.txt to force setting
`-rdynamic` explicitly.
Upstream status:
b8781653dcb8815a3019a77baf4f3b7f7a255ebe
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Seiderer [Thu, 13 Dec 2018 22:55:21 +0000 (23:55 +0100)]
iwd: bump version to 0.13
- drop 0001-monitor-pcap.c-add-missing-sys-stat.h-include.patch
(upstream applied [1])
- drop 0002-Fix-__iwd_backtrace_init-availability-detection.patch
(upstream applied [2], [3])
[1] https://git.kernel.org/pub/scm/network/wireless/iwd.git/commit/?id=
330a930b01abe64262d1c46c2e27b33e9bbe1487
[2] https://git.kernel.org/pub/scm/network/wireless/iwd.git/commit/?id=
40ec69876cbe40a36fec1d7bc007471b034708f5
[3] https://git.kernel.org/pub/scm/network/wireless/iwd.git/commit/?id=
7d6e11ddd5c0414f8e00db63a0aa7b1c5695b026
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Seiderer [Thu, 13 Dec 2018 22:55:20 +0000 (23:55 +0100)]
ell: bump version to 0.16
- drop 0001-ell-ell.sym-add-missing-l_genl_family_set_unicast_ha.patch
(upstream applied [1])
[1] https://git.kernel.org/pub/scm/libs/ell/ell.git/commit/?id=
01254efa6f69078000da7e87e43c9f245df0cfc0
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Asaf Kahlon [Fri, 14 Dec 2018 16:57:27 +0000 (18:57 +0200)]
python-cython: bump to version 0.29.2
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Asaf Kahlon [Fri, 14 Dec 2018 05:26:56 +0000 (07:26 +0200)]
python-yarl: bump to version 1.3.0
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Asaf Kahlon [Fri, 14 Dec 2018 05:26:55 +0000 (07:26 +0200)]
python-setuptools: bump to version 40.6.3
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Asaf Kahlon [Fri, 14 Dec 2018 05:26:54 +0000 (07:26 +0200)]
python-requests: bump to version 2.21.0
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Asaf Kahlon [Fri, 14 Dec 2018 05:26:53 +0000 (07:26 +0200)]
python-bcrypt: bump to version 3.1.5
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Fri, 14 Dec 2018 15:47:28 +0000 (16:47 +0100)]
kmod: fix build with pkgconf 1.5.3
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
kmod uses the completionsdir variable from bash-completions.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on bash-completions.pc.
Fixes:
- http://autobuild.buildroot.org/results/
f8a1f956333062027294e766ff0ddab5c35d5887
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Fri, 14 Dec 2018 15:30:39 +0000 (16:30 +0100)]
xapp_xdm: fix build with pkgconf 1.5.3
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xdm uses the appdefaultdir variable from xt.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/
08bcba7d7340f34dc66b5b2ab8fbcfbaee309e37
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Fri, 14 Dec 2018 15:29:34 +0000 (16:29 +0100)]
xapp_xditview: fix build with pkgconf 1.5.3
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xditview uses the appdefaultdir variable from xt.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/
af70962c59ca3dd29d85207033125b2e7eda3e81
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Fri, 14 Dec 2018 15:28:42 +0000 (16:28 +0100)]
xapp_xfd: fix build with pkgconf 1.5.3
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xfd uses the appdefaultdir variable from xt.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/
ea9884f4d676849d643d53275ebbc8668074a418
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Fri, 14 Dec 2018 15:27:16 +0000 (16:27 +0100)]
xapp_xclock: fix build with pkgconf 1.5.3
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xclock uses the appdefaultdir variable from xt.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/
ea028467a981f419c395158c55aa9a6d16e3f2c1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Fri, 14 Dec 2018 15:26:19 +0000 (16:26 +0100)]
xapp_xedit: fix build with pkgconf 1.5.3
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xedit uses the appdefaultdir variable from xt.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/
1b46f950fc0d957d04c0a60a24176d701ff16bd9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Fri, 14 Dec 2018 15:25:17 +0000 (16:25 +0100)]
xapp_xmap: fix build with pkgconf 1.5.3
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xmap uses the appdefaultdir variable from xt.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/
725c20ec9621a9c2d4b94784785bb481ff74f0e7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adrian Perez de Castro [Fri, 14 Dec 2018 16:51:33 +0000 (18:51 +0200)]
package/webkitgtk: security bump to version 2.22.5
This is a maintenance release of the current stable WebKitGTK+ version,
which contains security fixes for CVE identifiers: CVE-2018-4437,
CVE-2018-4438, CVE-2018-4441, CVE-2018-4442, CVE-2018-4443, and
CVE-2018-4464. Additionally, it fixes a couple of build failures in
unusual build configurations.
Release notes can be found in the announcement:
https://webkitgtk.org/2018/12/13/webkitgtk2.22.5-released.html
More details on the issues covered by security fixes can be found
in the corresponding security advisory:
https://webkitgtk.org/security/WSA-2018-0009.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jared Bents [Wed, 12 Dec 2018 14:20:56 +0000 (08:20 -0600)]
package/swupdate: Update to version 2018.11
Update to version 2018.11 to resolve the following build failure:
corelib/channel_curl.c: In function ‘channel_map_curl_error’:
corelib/channel_curl.c:298:2: error: duplicate case value
case CURLE_SSL_CACERT:
^
corelib/channel_curl.c:297:2: error: previously used here
case CURLE_PEER_FAILED_VERIFICATION:
^
when building with CONFIG_DOWNLOAD=y. This issue is happening since
the libcurl bump to 7.62.0.
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas Petazzoni [Mon, 10 Dec 2018 15:48:22 +0000 (16:48 +0100)]
package/lldpd: fix readline dependency
lldpd can optionally depend on readline, but readline is never added
to LLDPD_DEPENDENCIES, which this commit fixes.
This was detected using per-package directories.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Korsgaard [Tue, 11 Dec 2018 09:39:00 +0000 (10:39 +0100)]
nginx: bump to version 1.15.7
1.15.7 contains a number of bugfixes. From the changes file:
*) Bugfix: memory leak on errors during reconfiguration.
*) Bugfix: in the $upstream_response_time, $upstream_connect_time, and
$upstream_header_time variables.
*) Bugfix: a segmentation fault might occur in a worker process if the
ngx_http_mp4_module was used on 32-bit platforms.
https://nginx.org/en/CHANGES
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Thu, 13 Dec 2018 21:07:02 +0000 (22:07 +0100)]
xapp_xmag: fix build with pkgconf 1.5.3
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xmag uses the appdefaultdir variable from xt.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/
37dd630639a0d76e8121b3cca9e0e1f305ad620b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Thu, 13 Dec 2018 21:06:27 +0000 (22:06 +0100)]
xapp_oclock: fix build with pkgconf 1.5.3
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_oclock uses the appdefaultdir variable from xt.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/
77c57f68039b4490e70a3d15ca6f4b9e945d12e7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Thu, 13 Dec 2018 21:05:41 +0000 (22:05 +0100)]
xapp_xconsole: fix build with pkgconf 1.5.3
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xconsole uses the appdefaultdir variable from xt.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/
959986ce1411f14d84da4aafaeb965bf9a847c7c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Thu, 13 Dec 2018 21:04:50 +0000 (22:04 +0100)]
xapp_xload: fix build with pkgconf 1.5.3
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xload uses the appdefaultdir variable from xt.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/
722c1bdfb3f38a13be7a40793a8df4f0324885f4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Thu, 13 Dec 2018 21:04:10 +0000 (22:04 +0100)]
xapp_xmessage: fix build with pkgconf 1.5.3
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xmessage uses the appdefaultdir variable from xt.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/
ca1ce01dfef8b1a9cbb27e444c0c884f37f9cd7c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Thu, 13 Dec 2018 21:03:33 +0000 (22:03 +0100)]
xapp_xclipboard: fix build with pkgconf 1.5.3
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xclipboard uses the appdefaultdir variable from xt.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/
bbca1f77fc5beb1878c43b1abcad64b8e35a77e6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Thu, 13 Dec 2018 21:02:53 +0000 (22:02 +0100)]
xapp_editres: fix build with pkgconf 1.5.3
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_editres uses the appdefaultdir variable from xt.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/
938a91641c277c905e77779afe2d0e2ce92ed76d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Thu, 13 Dec 2018 21:02:09 +0000 (22:02 +0100)]
xapp_bitmap: fix build with pkgconf 1.5.3
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_bitmap uses the appdefaultdir variable from xt.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/
44bed7a9251e108f0c3bc8654b757ccc031a1187
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Thu, 13 Dec 2018 21:01:15 +0000 (22:01 +0100)]
xapp_xcalc: fix build with pkgconf 1.5.3
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xcalc uses the appdefaultdir variable from xt.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/
6d906fc092e86ecf4214a69a5f087efabab4ade8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Thu, 13 Dec 2018 21:00:33 +0000 (22:00 +0100)]
xapp_viewres: fix build with pkgconf 1.5.3
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_viewres uses the appdefaultdir variable from xt.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/
71b5fb2b5df30e25dacdef71f7aaddbecbf8bde6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Thu, 13 Dec 2018 20:59:52 +0000 (21:59 +0100)]
xapp_beforelight: fix build with pkgconf 1.5.3
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_beforelight uses the appdefaultdir variable from xt.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/
164bb80f261f48525de508b5f74321f2fec91cce
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Carlos Santos [Tue, 11 Dec 2018 11:21:13 +0000 (09:21 -0200)]
package/libpam-tacplus: fix compilation with GCC 8
GCC 8 demands that the size of the string copied by strncpy be smaller
than the size of the destination to keep space for the trailibg '\0'.
This causes a compilation error in pam_tacplus, so add a patch already
sent uptream to fix it.
Fixes:
http://autobuild.buildroot.net/results/
da6d150e470046c03c5f7463de045604e15e4a30/
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Baruch Siach [Tue, 11 Dec 2018 11:52:06 +0000 (13:52 +0200)]
package/i2c-tools: bump to version 4.1
Drop upstream patches.
Rename 'prefix' to 'PREFIX' following upstream change.
Update README hash for build documentation changes unrelated to license.
Cc: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
James Hilliard [Wed, 12 Dec 2018 02:20:04 +0000 (10:20 +0800)]
package/acpid: fix acpid.service permissions
Execution permissions cause systemd to throw runtime warnings since
systemd service files are essentially a type of configuration file and
are not designed to be executed like init scripts.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
James Hilliard [Wed, 12 Dec 2018 00:37:28 +0000 (08:37 +0800)]
package/wayland-protocols: bump to version 1.17
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
James Hilliard [Wed, 12 Dec 2018 00:33:49 +0000 (08:33 +0800)]
package/wayland: bump to version 1.16.0
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas Petazzoni [Tue, 11 Dec 2018 15:24:25 +0000 (16:24 +0100)]
package/libgpgme: properly tweak gpgme-config
libgpgme installs a gpgme-config script, it should be tweaked using
the <pkg>_CONFIG_SCRIPTS mechanism. This is generally useful and is
going to be particularly important with per-package directories.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Tue, 11 Dec 2018 18:19:43 +0000 (19:19 +0100)]
libva: fix build with pkgconf 1.5.3
Set ac_cv_path_WAYLAND_SCANNER to the wayland-scanner in the host
directory otherwise build will fail because libva will use pkgconfig to
find it
Fixes:
- http://autobuild.buildroot.org/results/
836d3a7085c576f607b1532d5204a54d6c2c1e66
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabio Estevam [Tue, 11 Dec 2018 13:22:26 +0000 (11:22 -0200)]
configs/freescale_imx8mqevk: bump packages to imx_4.14.62_1.0.0_beta
Bump kernel, U-Boot and ATF packages to the NXP imx_4.14.62_1.0.0_beta
release.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Carlos Santos [Wed, 12 Dec 2018 01:20:24 +0000 (23:20 -0200)]
DEVELOPERS: add intel-microcode and pcm-tools to my watch list
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
projects / buildroot.git / log