git.libre-soc.org Git - buildroot.git/log

i.MX: Use FREESCALE_IMX_SITE for Freescale packages

This patch consolidates the URLs for various Freescale-supplied
packages to use FREESCALE_IMX_SITE.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: "Thomas Petazzoni" <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sdl: add support for top-level parallel make

To be sure that host-autoconf dependency is already built move the
call to autogen.sh from SDL_POST_PATCH_HOOKS to SDL_PRE_CONFIGURE_HOOKS.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile: update comment about top-level parallel Makefile

After the latest patches top-level parallel Makefile is working but
there is still an issue when a package has an unspecified optional
dependency so change the comment to explain that.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package: enable jobserver for recursive make

Add '+' prefix to the $($(PKG)_BUILD_CMDS) and $($(PKG)_INSTALL*_CMDS)
commands to enable jobserver for the sub-make.

Without the '+' prefix GNU make does not detect the sub-make so it
disable the jobserver for the sub-make.

>From GNU make documentation:
Using the MAKE variable has the same effect as using a ‘+’ character
at the beginning of the recipe line. This special feature is only
enabled if the MAKE variable appears directly in the recipe: it does
not apply if the MAKE variable is referenced through expansion of
another variable. In the latter case you must use the ‘+’ token to get
these special effects.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile: add support for top-level parallel make

To be able to use top-level parallel make we must not depend in a rule
on the order of evaluation of the prerequisites, so instead of relyng on
the left to right ordering of evaluation of the prerequisites add an
explicit rule to describe the dependencies.

Add explicit rules to describe the following dependency chain:
$(TARGETS) -> target-finalize -> rootfs-* -> target-post-image

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package: add support for top-level parallel make

To be able to use top-level parallel make we must not depend in a rule
on the order of evaluation of the prerequisites, so instead of relying
on the left to right ordering of evaluation of the prerequisites add
an explicit rule to describe the dependencies.

We cannot use the pattern rules because they must have the same
dependency for every package, but we need to change the dependencies
depending on $(2)_OVERRIDE_SRCDIR variable value, so we must use a
more flexible way like $(2)_TARGET_% variables.

So add explicit dependencies for the following stamp files:
  $(2)_TARGET_EXTRACT
  $(2)_TARGET_PATCH
  $(2)_TARGET_CONFIGURE
  $(2)_TARGET_BUILD
  $(2)_TARGET_INSTALL_STAGING
  $(2)_TARGET_INSTALL_TARGET
  $(2)_TARGET_INSTALL_IMAGES
  $(2)_TARGET_INSTALL_HOST

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package: add toolchain dependency to every target package

This commit makes the dependency from the target toolchain explicit.
This way we can buid from command line a package that use
inner-generic-package right after the configuration phase, example:

make clean <package-name>

Also remove TARGETS_ALL because the only purpose was to add toolchain
dependency so it's superseded by this commit.

To prevent circular dependency add the new variable
<pkgname>_ADD_TOOLCHAIN_DEPENDENCY to avoid adding the toolchain
dependency for toolchain packages.

This is also a step forward supporting top-level parallel make.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package: add base dependency to every package

Move "dependencies" "dirs" "prepare" dependencies from "toolchain" to
every package.
This way we can build correctly every package right after the clean
stage.
As example with this commit we can build successfully the glibc right
after the clean stage:
make clean glibc

This is also a step forward supporting top-level parallel make.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dbus: ensure dbus user is created

Since we are changing the default dbus user, make sure this user is
consistently created.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dbus: bump version to 1.6.8

Cc: Gary Coulbourne <bear@bears.org>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ltp-testsuite: bump version to 20140115

Fixes:
http://autobuild.buildroot.net/results/14c/14c107a735bb54f55c99391b0ea0ff6bd1234e12/

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libatomic_ops: Update repository and bump version

Change the download source to a Github repository which is more recent.
This patch also bump libatomic_ops version and remove a patch that is
now upstream.

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

glibc: add 2.19 as a supported version

glibc 2.19 has been released recently
(https://sourceware.org/ml/libc-alpha/2014-02/msg00224.html). This
commit allows to build a toolchain with this new version. In order to
allow this, we add a version selection that did not exist for
glibc. We default to 2.18, which was the only supported version until
now, and add an option for 2.19.

For microblaze, which uses a specific glibc version, the version
selection choice is not displayed.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdb: arc: bump to git commit cb15acc

Signed-off-by: Anton Kolesov <anton.kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc: arc: bump to git commit f37101d

Signed-off-by: Anton Kolesov <anton.kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

binutils: arc: Bump to git commit a934fe5

Signed-off-by: Anton Kolesov <anton.kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Revert "dmraid: disable on ARC arch"

This reverts commit 262a4c0bf7fb64d632ae6d40c22a62380c0af65f.

Compiler error has been fixed, and building this package doesn't cause an
ICE anymore.

Signed-off-by: Anton Kolesov <anton.kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc: arc: bump to git commit c6227bc

This fixes two issues: one segmentation fault in GCC and one invalid code
generation. Those fix numerous autobuild failures, including:
http://autobuild.buildroot.net/results/715/7158a2a19da6bfa950125a951a39061ccaa73101/
http://autobuild.buildroot.net/results/9d4/9d4fbcb91cf76e01c833d70c401c0828ad37631a/
http://autobuild.buildroot.net/results/ef6/ef6a0e2d382ae202bb8f0e9fc9f5e48c90119faf/
http://autobuild.buildroot.net/results/276/27692619efee482cded56967017f260bd30eefe7/

Signed-off-by: Anton Kolesov <anton.kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

manual: update /dev management section.

This patch updates the /dev management section in the manual with information
about eudev, which replaces udev.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

systemd: bump to v207

This patch bumps systemd to v207 but also declares it as a provider for the
udev virtual package.

Starting with systemd 183, udev has been merged into
systemd. The udev daemon is now installed as /lib/systemd/systemd-udevd.
This means that /dev management using udev is only available if systemd
is chosen as init system.

When configuring systemd, the following options are available:

- activation of systemd-journal-gatewayd, to access the journal via
HTTP.
- activation of extra features like journal compression and sealing.

Support for uClibc has also been removed because:

- upstream has no interest in supporting uClibc.
- using a shrinked libc brings no advantage, given the size of all the
programs included in Systemd. So using glibc does not matter.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

udev: convert to virtual package

This patch converts udev to a virtual package. For the moment, there is only
one provider for the udev features: eudev.

Packages meant to provide udev-like features must select the symbol
BR2_PACKAGE_HAS_UDEV.

Packages depending on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV or
BR2_PACKAGE_UDEV have been converted to use the new symbol.

[Peter: move legacy symbols under 2014.05]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

eudev: new package

eudev is a userspace device management daemon. It is a standalone
version, independent from systemd. It is a fork maintained by Gentoo.

Features:

- No extra configuration options are available: Gudev is build if
libglib2 is selected.
- No dependency on hwdata as the package uses its own hardware
database (as does systemd).

eudev 1.3 is in sync with systemd v207.

[Peter: add BR2_USE_MMU dependency]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Add OpenTyrian package (SDL game)

[Peter: hide -data package if opentyrian isn't enabled]
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

git: bump to version 1.8.5.4

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

php-imagick: new package

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

php-ssh2: new package

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

php-yaml: new package

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

php-zmq: new package

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

php: fix for external extensions

Adjust phpize and php-config to make them work for cross-compiled
external extensions.
While at it also fix dl* issues that prevent said extensions from
loading.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-libav: bump version

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-plugins-bad: bump version

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-plugins-ugly: bump version

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-plugins-good: bump version

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-plugins-base: bump version

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gstreamer1: bump version

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

connman: bump version

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

usb_modeswitch_data: bump to version 20140129

20140129:
Minor bug fix in configs 19d2:0149 and 19d2:2000 (Lars Melin reported)

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

usb_modeswitch: bump to version 2.1.0

Version 2.1.0, 2014/01/28
    ATTENTION: -I flag meaning reversed, default is to skip SCSI inquiry;
    introduction of StandardEject, replacing many MessageContents with the
    same function, reducing size of device config files, and always including
    the 'Allow Medium Removal' before ejecting (thanks to Lars Melin for
    the idea); fix in "bulk_read", removing bogus CSW request (report from
    "Sonya@zte")

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

f2fs-tools: bump to version 1.3.0

This version includes:
- add f2fstat tool
- critical bug fix on nat bitmaps

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

kickoff 2014.05 development cycle

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2014.02-rc1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: update with recent changes

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sdl: fix autoreconf timing issue

Context:
The autobuilders were failing on the symbol _XData32 being in conflicts.
A patch had been added to SDL to add a check to the configure.in

Problem:
Sometimes, the build would fail, because of an _XData32 symbol being in
conflicts eventhrough the patch was here.

What was happening:
Following the classic buildroot workflow:
   - Extract
   - [...]
   - Apply 001 patch, which touches configure.in AND configure
   - Apply 002 patch, which touches configure.in
   - Invoke autogen.sh
   - [...]

Right before running autogen.sh, we have configure.in which is more
recent than configure, which is fine.
We then, execute autogen.sh which, basically, runs autoconf.

If your machine was lighty loaded, the time difference between
configure.in and configure was really tiny (ms order), which seems to be
neglected by autoconf.
The results was that the configure was *NOT* generated. And our second
patch was not taken into account.

If your machine was under heavy load, the time difference between the
two files would have been greater and then *maybe* picked up by
autoconf. And then the configure file was re-generated.

When the 0001 patch was introduced, SDL package did *NOT* run it's
autogen.sh, which is why it touches also the configure.
This came later, causing this behavior.

Fixes:
  http://autobuild.buildroot.net/results/d1c/d1c36f634dbf6b6e5d18444c2a23dfd129202b80/

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libsigsegv: disable for ARC

Fixes http://autobuild.buildroot.net/results/5cd/5cd051937a9471f7fb47363e868cb4b61d788d75/build-end.log

The ARC uClibc port doesn't provide ucontext_i.sym file required to enable
context manipulation routines that libsigsegv needs.

Signed-off-by: Anton Kolesov <anton.kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rpcbind: uses fork(), needs MMU

Fixes:

http://autobuild.buildroot.net/results/d7c/d7c788749b54275154cc3934a7a32385cd72be61/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile.legacy: fix recursive invocation with BUILDROOT_DL_DIR and _CONFIG

The legacy support for the old BUILDROOT_DL_DIR and BUILDROOT_CONFIG
breaks down when make is invoked recursively - which is done in a few
cases, e.g. silentoldconfig, external-defs, ... These targets always
give a legacy error.

For BUILDROOT_DL_DIR, this is fixed by making sure that the original
value of BR2_DL_DIR taken from the environment is also exported again.

For BUILDROOT_CONFIG, this is fixed with an additional comparison of
the environment variable's value with the fake value that we introduce
ourselves.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

jpeg-turbo: fix "jpegtran" spelling in target-install hook

Use correct bin name so that JPEG_TURBO_REMOVE_USELESS_TOOLS fixup
actually removes it.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libjpeg: fix "jpegtran" spelling in target-install hook

Use correct bin name so that LIBJPEG_REMOVE_USELESS_TOOLS fixup
actually removes it.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: update with recent changes

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/raspberrypi: remove packages not strictly required

rpi-userland and libcoffi are not strictly required to boot up the
Raspberry Pi, so remove them from the defconfig.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/raspberrypi: bump kernel version

Bump from rpi-3.10.27 to rpi-3.10.29.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

cpanminus: remove it

cpanminus was marked as broken, now it becomes useless with the Perl infrastructure.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

perl: remove useless patch

The Perl infrastructure uses a host version of Module-Build
(see previous commit "host-perl-module-build: new package").
The target version is never used, so no need to patch it.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

host-perl: export and rename PERL5LIB

The official Perl documentation refers only to PERL5LIB.
PERLLIB is obsolete, we don't need to be compatible with Perl4.

PERL5LIB is used in all environment, so it is simpler to just export it.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

beaglebone: change to zImage

The default U-Boot configuration is now to use a zImage instead of uImage.

Signed-off-by: Anders Darander <anders@chargestorm.se>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

beaglebone: update to latest U-Boot

Update to the default version of U-Boot, at this time 2013.10.

Tested with an old uEnv.txt (i.e. using uImage) and with the
currently prefered zImage.

Signed-off-by: Anders Darander <anders@chargestorm.se>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

am33x-cm3: update to latest version

This goes hand-in-hand with the kernel update.
The version is taken from meta-ti.

The new kernel version, 3.12, requires a newer PM FW.

This should correspond to v05.00.00.02, though that tag
has not been pushed...

Signed-off-by: Anders Darander <anders@chargestorm.se>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

beaglebone: update to TI 3.12 kernel

Git repo version is taken from meta-ti.
It's a 3.12.10 kernel with TI's own patches on top.

The defconfig has been kept rather close to our old defconfig.
The kernel has been boot-tested using an NFS-root.

Apart from the kernel change, the linux headers has also been
updated from 3.8.12 to 3.12.10.

[Peter: drop UEVENT_HELPER_PATH setting]
Signed-off-by: Anders Darander <anders@chargestorm.se>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

madplay: fixes build when toolchain has locale support

Otherwise build fails in intl/relocatable.c with:
./relocatable.c: In function 'libintl_relocate':
./relocatable.c:402:40: error: 'INSTALLPREFIX' undeclared (first use in this function)
./relocatable.c:402:40: note: each undeclared identifier is reported only once for each function it appears in

[Peter: drop redundant 'else' part]
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libtorrent: disable on ARC arch

Libtorrent has dependencies on atomic operations. However ARC GCC doesn't
implement those at the moment so package should be disabled. Rtorrent
depends on libtorrent.

This fixes:
http://autobuild.buildroot.net/results/51414e22c8ea47c38df20d864526a370c5a895d7/

Signed-off-by: Anton Kolesov <anton.kolesov@synopsys.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

barebox: bump to version 2014.02.0

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/news.html: add report from FOSDEM meeting

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: don't automatically set uevent_helper with mdev /dev management

When mdev /dev management is chosen in the buildroot configuration, the
Linux configuration is updated automatically to set option
CONFIG_UEVENT_HELPER_PATH to "/sbin/mdev". However, the help text of this
option explicitly recommends not setting this option due to large
performance impact during boot (experienced first hand by the reporter ánd
author).

The mdev startup script S10mdev already sets the helper during userspace
boot, which will make sure mdev is working correctly.

Fixes bug #6596: https://bugs.busybox.net/show_bug.cgi?id=6596

Reported-by: Andreas Koop <andreas.koop@zf.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: update with recent changes

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

infra: replace BUILDROOT_CONFIG with BR2_CONFIG

To make the naming consistent (all user-visible options should be
prefixed with BR2_).

An entry is added to Makefile.legacy to warn users who have set
BUILDROOT_CONFIG but not BR2_CONFIG.

Still export BUILDROOT_CONFIG but pointing to some phony value, to
make sure that scripts that still use it fail in a predictable way.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vlc: fix typo when setting VLC_CONF_ENV

Fixes:
http://autobuild.buildroot.org/results/917/917c26656557d50f869639162ec7e9d0f3399824/build-end.log

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vlc: fix glx support

glx support is provided by the mesa3d package; so, enable it only when
mesa3d is part of the package selection.

Fixes:
http://autobuild.buildroot.org/results/9b4/9b46021ea0064850ce8f1adcb5455d6da5bff459/build-end.log

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

kexec: fix build failure

Add patch retrived from upstream and fixing undefined bzImage_support_efi_boot
build failure.

Fixes:
http://autobuild.buildroot.org/results/c35/c3525dd25a37db7a976c7019901160e449363b5d/build-end.log

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

kexec: rename patch to add sequence number

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

trace-cmd: needs mmu

Fixes:
http://autobuild.buildroot.net/results/0b7/0b73c684b3d7edcd818cb113fda534e552028d58/build-end.log

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

trace-cmd: disable on avr32

AVR32 does not have TLS support.

Fixes:
http://autobuild.buildroot.net/results/e24/e24af3ceb125da50f0f5cbffb0e3ca091c68af33/build-end.log

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

infra: replace BUILDROOT_DL_DIR with BR2_DL_DIR.

To make the naming consistent (all user-visible options should be
prefixed BR2_).

An entry is added to Makefile.legacy to warn users who have set
BUILDROOT_DL_DIR but not BR2_DL_DIR.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

kmod: really pass --disable-manpages

The line below overwrites KMOD_CONF_OPT, so move the --disable-manpages
options below.

Fixes http://autobuild.buildroot.net/results/842/842131307c171e1bc5a1e918996d53b00ddb1be3/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-autotools: fixup pkg_CONFIGURE_CMDS after DISABLE_DOCUMENTATION removal

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

infra: remove separate definition of DISABLE_DOCUMENTATION

Since we now always disable documentation on target, there is no need to
have a separate variable DISABLE_DOCUMENTATION anymore.

Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

kernel-headers: remove deprecated versions 3.1, 3.3, 3.5

The Linux kernel headers versions 3.1, 3.3, and 3.5 have been deprecated
since 2013.02 and thus can be removed in 2014.02.
For legacy handling, we automatically select versions 3.2, 3.4, and 3.6,
respectively.

Additionally, this patch removes the now unused symbol
BR2_DEPRECATED_SINCE_2013_02.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdb: remove deprecated versions 7.2.x and 7.3.x

Gdb versions 7.2.x and 7.3.x have been deprecated since 2013.02 and thus can
be removed in 2014.02.
For legacy handling, version 7.5.x is automatically selected.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ccache: remove deprecated target package

The ccache target package has been deprecated since 2013.02 and thus can be
removed in 2014.02. This does not change anything about host ccache (used
for speeding up builds).

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

packages: remove support for documentation on target

This patch removes deprecated symbol BR2_HAVE_DOCUMENTATION and all its
usage. Additionally, it removes the now unused BR2_DEPRECATED_SINCE_2012_11.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

automake: remove deprecated target package

The automake support on target has been deprecated for more than four
buildroot releases and thus can be removed. This doesn't change anything
about the host automake support.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

autoconf: remove deprecated target package

The autoconf support on target has been deprecated for more than four
buildroot releases and thus can be removed. This doesn't change anything
about the host autoconf support.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xstroke: remove deprecated package

xstroke has been deprecated since 2013.02 and thus can be removed in
2014.02.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/squashfs: add selection for the host variant

If any of the post-image scripts wants to handle squashfs filesystems,
we need to expose an option for squashfs-tools to be user-selectable.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ryan Barnett <rjbarnet@rockwellcollins.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

kexec: bump to 2.0.5

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdb: move version selection from gdb.mk to Config.in.host

This avoids duplication of the version selection between these two files.

Cc: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

snmppp: bump to version 3.3.3

Changes snmp++v3.3.3

====================

- Fixed: [APP-30] SNMP++ cannot BER decode Oids starting with 2 and
with second sub-identifier >39 correctly.
- Fixed: [APP-31] SNMP++ does not encode Oids starting with 2 and
second sub-ID greater than 47 correctly.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sysstat: bump to version 10.2.1

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fs/ubi: add option to use custom ubinize config file

By default, the UBI FS target creates a ubinize configuration
file on-the-fly, for a single volume. Add an option to specify
a custom config file.

E.g., one might want to deploy a system with a volume for the
built ubifs image, a volume for a future upgrade image, and a
volume for user data.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gpsd: disable for microblaze arch

gpsd will fail on an internal compiler error for the microblaze
architecture so disabling it on that architecture.

Fixes:
http://autobuild.buildroot.org/results/42d/42da870722f24e4202d8265597771a0449e74cfd

[Peter: add comment explaining why]
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dmraid: disable on ARC arch

The ARC compiler has an internal failure while compiling this package
so disable this package for this architecture.

Fixes:
http://autobuild.buildroot.net/results/ef6/ef6a0e2d382ae202bb8f0e9fc9f5e48c90119faf

[Peter: add comment explaining why]
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Revert "util-linux: add nsenter option"

This reverts commit 9f91d79601da42516752318beecfd080dc05aac9.

Not all toolchains have setns(), and the configure script automatically
enables nsenter if it does, so get rid of the explicit option.

See http://lists.busybox.net/pipermail/buildroot/2014-February/088669.html
for details.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

apply-patches.sh: make scan_patchdir work recursively

scan_patchdir is called recursively. For this to work properly, the
variable path which is set to $1 at the very beginning must be local not
global.

A test case is to set BR2_GLOBAL_PATCH_DIR to 'mypatches' and having the
following tree in the buildroot root:

$ find mypatches/
mypatches/
mypatches/busybox
mypatches/busybox/subdir.patch
mypatches/busybox/subdir.patch/busybox-0001-abc.patch
mypatches/busybox/busybox-0002-def.patch
mypatches/busybox/asubdir.patch
mypatches/busybox/asubdir.patch/busybox-0003-xyz.patch

When running 'make busybox-dirclean busybox-patch' originally, you'd get:

    Applying busybox-0003-xyz.patch using patch:

    Applying busybox-0002-def.patch using patch:
    Error: missing patch file
    mypatches/busybox/asubdir.patch/busybox-0002-def.patch

While with this fix:

    Applying busybox-0003-xyz.patch using patch:

    Applying busybox-0002-def.patch using patch:

    Applying busybox-0001-abc.patch using patch:

This fixes bug #6434 (https://bugs.busybox.net/show_bug.cgi?id=6434)

Signed-off-by: Daniel Mentz <daniel@exxm.de>
[Thomas: update commit message with test case]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

manual: $(BR2_EXTERNAL)/{Config.in, external.mk} are mandatory

The manual is a bit vague about whether Config.in and external.mk
are mandatory or optional.

Make it explicit in the manual that they are mandatory.

Reported-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vlc: enable altivec support only when appropriate

All PowerPC CPUs do not support altivec instruction set; so enable its
support only when the sub-architecture support it.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vlc: fix sdl support

sdl video output module includes xlib headers, so it requires
xlib_libx11 to be available.

Fixes:
http://autobuild.buildroot.org/results/d41/d41d2f36a4384289e300a3cf91d51960df9fab00/build-end.log

[Peter: check for SDL X11 backend instead]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vlc: fix libgcrypt support

This patch allows to override the libgcrypt-config location instead of
using the one found in the PATH, which is usually the host system one.

Fixes:
http://autobuild.buildroot.org/results/5e4/5e42d1139bbbed2421193d8acc52df9442c43730/build-end.log

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vlc: fix live555 support

vlc looks for a *.pc file which is not provided by the live555 package.
So, instead, we explicitly set the LIVE555_CFLAGS and LIVE555_LIBS
variables.

Fixes:
http://autobuild.buildroot.org/results/b59/b5972ecad4e5004dc23a2366066ce45346994f58/build-end.log

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vlc: fix bonjour support

bonjour support checks for avahi-client, which requires avahi-daemon and
dbus enabled.

Fixes:
http://autobuild.buildroot.org/results/f8b/f8bed9a42f1853db8aa81161d7be5a7cb67afe8f/build-end.log

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vlc: fix svg support

In vlc, svg support is done using librsvg, not libsvg.

Fixes:
http://autobuild.buildroot.org/results/344/344af6e756a5f2c1ee515a355ae5b288401c4c71/build-end.log
http://autobuild.buildroot.org/results/19f/19f1450ed5453aa666bc7aae2e965ad81e5f845d/build-end.log

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>