gas/testsuite/
2008-08-28  Jan Beulich  <jbeulich@novell.com>

* gas/i386/gas/i386/opcode-suffix.d: Add suffixes to cmovXX.

opcodes/
2008-08-28  Jan Beulich  <jbeulich@novell.com>

* i386-dis.c (dis386_twobyte): Adjust cmovXX mnemonics.

2008-08-28  Kris Van Hees  <kris.van.hees@oracle.com>

        PR gold/6858
        * options.cc (General_options::finalize): Allow undefined symbols
        in shlibs if linking -shared.

        PR gold/6859
        * symtab.cc (Symbol::init_base_undefined): Mark explicitly undefined
        symbols as not needing a dynsym entry.

gas/

2008-08-28  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-ia64.c (CR_IIB0): New.
(CR_IIB1): Likewise.
(cr): Add cr.iib0 and cr.iib1.
(specify_resource): Handle IA64_RS_CR_IIB and CR_IIB0/CR_IIB1.

gas/testsuite/

2008-08-28  H.J. Lu  <hongjiu.lu@intel.com>

* gas/ia64/dv-raw-err.s: Add tests for cr.iib0 and cr.iib1.
* gas/ia64/dv-waw-err.s: Likewise.
* gas/ia64/regs.s: Likewise.

* gas/ia64/dv-raw-err.l: Updated.
* gas/ia64/dv-waw-err.l: Likewise.
* gas/ia64/regs.d: Likewise.

include/opcode/

2008-08-28  H.J. Lu  <hongjiu.lu@intel.com>

* ia64.h (ia64_resource_specifier): Add IA64_RS_CR_IIB.  Update
IA64_RS_CR.

opcodes/

2008-08-28  H.J. Lu  <hongjiu.lu@intel.com>

* ia64-dis.c (print_insn_ia64): Handle cr.iib0 and cr.iib1.
* ia64-gen.c (lookup_specifier): Likewise.

* ia64-ic.tbl: Add support for cr.iib0 and cr.iib1.
* ia64-raw.tbl: Likewise.
* ia64-waw.tbl: Likewise.
* ia64-asmtab.c: Regenerated.

2008-08-28  Tristan Gingold  <gingold@adacore.com>

* configure.ac (powerpc-*-darwin*, i?86-*-darwin*,x86_64-*-darwin9):
Enable bfd, binutils and opcodes.
* configure: Regenerate.

2008-08-28  Tristan Gingold  <gingold@adacore.com>

* configure.ac (powerpc-*-darwin*, i?86-*-darwin*,x86_64-*-darwin9):
Enable bfd, binutils and opcodes.
* configure: Regenerate.

gas/
2008-08-28  Jan Beulich  <jbeulich@novell.com>

* config/tc-i386.c (md_assemble): Force number of displacement
operands to zero when processing string instruction.
(i386_index_check): Special-case string instruction operands. Don't
fudge address prefix if there already was a memory operand. Fix
error message to correctly reflect the addressing mode used.
(i386_att_operand): Fix comment.
(i386_intel_operand): Snapshot, clear, and restore base and index
reg for each operand processed. Increment count of memory operands
later.

gas/testsuite/
2008-08-28  Jan Beulich  <jbeulich@novell.com>

* gas/i386/string-bad.{l,s}, gas/i386/string-ok.{d,e,s}: New.
* gas/i386/i386.exp: Run new tests.

* elf-hppa.h (elf_hppa_reloc_final_type): Handle R_PARISC_GPREL64,
R_PARISC_SEGREL32 and R_PARISC_SEGREL64.
* som.c (som_fixup_formats): Add R_DATA_GPREL fixup.
(som_hppa_howto_table): Likewise.
(hppa_som_gen_reloc_type): In case R_HPPA_GOTOFF, detect R_DATA_GPREL
final type.
(som_write_fixups): Handle R_DATA_GPREL.

* config/tc-hppa.c (is_SB_relative): New macro.
(fix_new_hppa): Remove $segrel$ marker.
(cons_fix_new_hppa): Set reloc type R_PARISC_SEGREL32 if expression is
segment relative.
* config/tc-hppa.h (tc_frob_symbol): Check for $segrel$.

*** empty log message ***

gas/testsuite/

2008-08-27  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/intel.s: Add tests for fidivr.

* gas/i386/intel.d: Updated.

opcodes/

2008-08-27  H.J. Lu  <hongjiu.lu@intel.com>

* i386-opc.tbl: Correct fidivr operand size.

* i386-tbl.h: Regenerated.

gas/
2008-08-27  Jan Beulich  <jbeulich@novell.com>

* config/tc-i386.c (check_string): Use register_prefix for error
message.
(process_operands): Likewise.

* remote.c: Include "gdb_stat.h".

daily update

*** empty log message ***

* dummy-frame.h (dummy_frame_pop): Add prototype.
* dummy-frame.c: Include "observer.h".
(dummy_frame_push): Do not check for stale frames.
(dummy_frame_pop): New function.
(cleanup_dummy_frames): New function.
(_initialize_dummy_frame): Install it as inferior_created observer.

* frame.h (struct frame_id): Update comments.
(frame_id_inner): Remove prototype.
* frame.c (frame_id_inner): Make static.  Add comments.
(frame_find_by_id): Update frame_id_inner safety net check to avoid
false positives for targets using non-contiguous stack ranges.
(get_prev_frame_1): Update frame_id_inner safety net check.
(frame_pop): Call dummy_frame_pop when popping a dummy frame.

* stack.c (return_command): Directly pop the selected frame.
* infrun.c (handle_inferior_event): Remove dead code.
* i386-tdep.c (i386_push_dummy_call): Update comment.

* breakpoint.c (remove_breakpoint): Do not fail if unable to remove
breakpoint from shared library.

* solib-svr4.c (read_program_header): New function.
(scan_dyntag_auxv): New function.
(elf_locate_base): Use it if scan_dyntag fails.
(find_program_interpreter): New function.
(enable_break): Use it instead of .interp section.

ChangeLog:

* remote.h (remote_filename_p, remote_bfd_open): Add prototypes.
* remote.c (remote_bfd_iovec_open, remote_bfd_iovec_close,
remote_bfd_iovec_pread, remote_bfd_iovec_stat, remote_filename_p,
remote_bfd_open): New functions.
(remote_hostio_send_command): Fail safely if remote connection
is not set up.

* solist.h (solib_open): Remove prototype.
(solib_bfd_open): Add prototype.
* solib.c: Include "remote.h".
(solib_open): Remove, replace by ...
(solib_bfd_open): ... this new function.  Handle remote BFDs.
(solib_map_sections): Replace solib_open by solib_bfd_open.
* solib-frv.c: Include "exceptions.h".
(enable_break2): Replace solib_open by solib_bfd_open.
* solib-svr4.c: Include "exceptions.h".
(enable_break): Replace solib_open by solib_bfd_open.

* symfile.c: Include "remote.h".
(build_id_verify): Handle remote BFDs.
(separate_debug_file_exists): Use BFD to access file.  Handle
remote BFDs.
(symfile_bfd_open): Handle remote BFDs.
(reread_symbols): Handle remote BFDs.

* NEWS: Mention "remote:" argument prefix to "set sysroot".

doc/ChangeLog:

* gdb.texinfo (Commands to Specify Files): Document "remote:"
argument prefix to "set sysroot".

* gdbarch.sh (target_gdbarch): New global variable.
(deprecated_current_gdbarch_select_hack): Set it.
* gdbarch.c, gdbarch.h: Regenerate.

* arch-utils.c (gdbarch_update_p): Use target_gdbarch instead
of current_gdbarch.
* target-descriptions.c (target_find_description): Likewise.
* arm-tdep.c (arm_update_current_architecture): Likewise.
(show_fp_model, arm_show_abi, arm_show_fallback_mode,
arm_show_force_mode): Likewise.
* mips-tdep.c (show_mask_address, show_mipsfpu_command,
show_mips_abi): Likewise.
* mep-tdep.c (me_module_register_set, current_me_module): Likewise.

* target.c (target_translate_tls_address): Use target_gdbarch
instead of current_gdbarch.
* remote.c (struct packet_reg): Likewise.
(get_remote_arch_state, packet_reg_from_regnum,
packet_reg_from_pnum, remote_check_symbols, remote_wait,
remote_address_masked, remote_insert_breakpoint,
remote_insert_hw_breakpoint, remote_read_description): Likewise.
* remote-m32r-sdi.c (m32r_resume, m32r_wait): Likewise.
* remote-mips.c (mips_open, mips_common_breakpoint): Likewise.
* cris-tdep.c (cris_can_use_hardware_watchpoint): Likewise.

* solib.c (solib_open, solib_map_sections, solib_read_symbols,
solib_add, info_sharedlibrary_command, solib_address,
solib_create_inferior_hook, in_solib_dynsym_resolve_code,
solib_global_lookup): Likewise.
* solib-frv.c (enable_break2, frv_relocate_main_executable): Likewise.
* solib-irix.c (irix_current_sos, irix_open_symbol_file_object):
Likewise.
* solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
* solib-svr4.c (exec_entry_point, enable_break, svr4_free_so,
set_solib_svr4_fetch_link_map_offsets, svr4_fetch_link_map_offsets):
Likewise.
* nto-tdep.c (nto_find_and_open_solib, nto_init_solib_absolute_prefix,
nto_truncate_ptr): Likewise.
* mips-linux-tdep.c (mips_linux_in_dynsym_stub): Likewise.

* c-arm.texi: Add tutorial on ARM unwinding pseudo ops.

* ppc-linux-tdep.c (ppc_linux_vsx_regset_sections) New structure.
(ppc_linux_vmx_regset_sections): New structure.
(ppc_linux_fp_regset_sections): New structure.
(ppc_linux_init_abi): Select core-file regset  based on target
features.

        * elf32-arm.c: Fix up comment describing Thumb to ARM interworking
            stub.

* target.c (debug_print_register): Use regcache_raw_collect
instead of regcache_cooked_read.  Only handle raw registers.

bfd/
        * elf32-arm.c (arm_thumb_arm_v4t_short_branch_stub): Define.
        (elf32_arm_stub_type): Add arm_thumb_arm_v4t_stub_short_branch.
        (arm_type_of_stub): Handle armv4t short branches. Update
        prototype.
        (arm_stub_is_thumb): Handle arm_thumb_arm_v4t_stub_short_branch.
        (arm_build_one_stub): Likewise.
        (arm_size_one_stub): Likewise.
        (elf32_arm_size_stubs): Use new arm_type_of_stub prototype.
        (arm_map_one_stub): Handle arm_thumb_arm_v4t_stub_short_branch.

        ld/testsuite/
        * ld-arm/arm-elf.exp: Add farcall-thumb-arm-short test.
        * ld-arm/farcall-group2.s: Fix comment.
        * ld-arm/farcall-thumb-arm-short.d: New test.
        * ld-arm/farcall-thumb-arm-short.s: New test.

PR 6727
   * emultempl/armelf.em (arm_elf_set_bfd_for_interworking): Scan all
   input sections in all input bfds and always select the last
   suitable one, so that interworking stubs are always processed
   after all other input sections.
   (arm_elf_before_allocation): Remove redundant use of
   output_has_begun flag.

* config/bfin-parse.y (check_macfunc_option): Fix instruction
mode checking.
(asm_1): Check mode for 16-bit multiply instructions.

testsuite/
* gas/bfin/arith_mode.d: New test.
* gas/bfin/arith_mode.s: New test.
* gas/bfin/invalid_arith_mode.l: New test.
* gas/bfin/invalid_arith_mode.s: New test.
* gas/bfin/bfin.exp: Add arith_mode and invalid_arith_mode.

*** empty log message ***

daily update

* cp-name-parser.y: Include config.h before system headers.

* m88k-tdep.c: Update for unwinder changes.

Merge from gcc:
2008-08-16  Nicolas Roche  <roche@adacore.com>
* Makefile.tpl: Add BOOT_ADAFLAGS.
* Makefile.in: Regenerate.

Merge from gcc.

* gmon_io.h: Don't include sysdep.h here.
(O_BINARY, SET_BINARY): Don't define here.
* gmon_io.c: Include "binary-io.h".
(gmon_out_read): Remove #ifdef SET_BINARY.
* Makefile.am: Run "make dep-am"
* Makefile.in: Regenerate.

* sysdep.h: Include "binary-io.h".
(O_BINARY): Don't define here.
* bin2c.c (O_BINARY, O_TEXT, SET_BINARY): Don't define here.
* strings.c: Likewise.
(main): Remove #ifdef SET_BINARY.
* Makefile.am: Run "make dep-am"
* Makefile.in: Regenerate.

* binary-io.h: New file, imported from gnulib, but don't
#include <fcntl.h> or <stdio.h>.

*** empty log message ***

daily update

(_bfd_elf_write_section_eh_frame): Do proper
extension when calculating difference of offsets.

* s390-tdep.c (s390_address_class_type_flags): Use
TYPE_INSTANCE_FLAG_ADDRESS_CLASS_1.
(s390_address_class_type_flags_to_name): Likewise.
(s390_address_class_name_to_type_flags): Likewise.

* Makefile.in (uninstall): Apply $(EXEEXT) too.

* rs6000-tdep.c (rs6000_builtin_type_vec128): Don't use
TYPE_FLAGS.
* features/rs6000/powerpc-vsx32l.c
(initialize_tdesc_powerpc_vsx32l): Update.
* features/rs6000/powerpc-vsx32.c
(initialize_tdesc_powerpc_vsx32): Update.
* features/rs6000/powerpc-vsx64.c
(initialize_tdesc_powerpc_vsx64): Update.
* features/rs6000/powerpc-vsx64l.c
(initialize_tdesc_powerpc_vsx64l): Update.
* target-descriptions.c (maint_print_c_tdesc_cmd): Emit
TYPE_VECTOR, not TYPE_FLAGS.

gdb:
* xml-tdesc.c (tdesc_end_union): Update.
* stabsread.c (define_symbol): Update.
(read_type): Update.
(read_struct_type): Update.
(read_enum_type): Update.
* spu-tdep.c (spu_builtin_type_vec128): Update.
* sh-tdep.c (sh_push_dummy_call_fpu): Update.
(sh_push_dummy_call_nofpu): Update.
* mdebugread.c (parse_symbol): Update.
(parse_symbol): Update.
(parse_symbol): Update.
(upgrade_type): Update.
* jv-lang.c (java_lookup_class): Update.
* iq2000-tdep.c (iq2000_pointer_to_address): Update.
* i386-tdep.c (i386_mmx_type): Update.
(i386_sse_type): Update.
* gdbtypes.h (enum type_flag_value): New enum.
(enum type_instance_flag_value): New enum.
(TYPE_FLAG_UNSIGNED, TYPE_FLAG_NOSIGN, TYPE_FLAG_STUB,
TYPE_FLAG_TARGET_STUB, TYPE_FLAG_STATIC, TYPE_FLAG_PROTOTYPED,
TYPE_FLAG_INCOMPLETE, TYPE_FLAG_VARARGS, TYPE_FLAG_VECTOR,
TYPE_FLAG_FIXED_INSTANCE, TYPE_FLAG_STUB_SUPPORTED,
TYPE_FLAG_NOTTEXT): Now enum constants.
(TYPE_FLAG_CONST, TYPE_FLAG_VOLATILE, TYPE_FLAG_CODE_SPACE,
TYPE_FLAG_DATA_SPACE, TYPE_FLAG_ADDRESS_CLASS_1,
TYPE_FLAG_ADDRESS_CLASS_2): Remove.
(TYPE_INSTANCE_FLAG_CONST, TYPE_INSTANCE_FLAG_VOLATILE,
TYPE_INSTANCE_FLAG_CODE_SPACE, TYPE_INSTANCE_FLAG_DATA_SPACE,
TYPE_INSTANCE_FLAG_ADDRESS_CLASS_1,
TYPE_INSTANCE_FLAG_ADDRESS_CLASS_2): New constants.
(TYPE_UNSIGNED, TYPE_NOSIGN, TYPE_STUB, TYPE_TARGET_STUB,
TYPE_STATIC, TYPE_PROTOTYPED, TYPE_INCOMPLETE, TYPE_VARARGS,
TYPE_VECTOR, TYPE_FIXED_INSTANCE, TYPE_STUB_SUPPORTED,
TYPE_NOTTEXT): Update.
(TYPE_FLAG_ADDRESS_CLASS_ALL): Remove.
(TYPE_INSTANCE_FLAG_ADDRESS_CLASS_ALL): New define.
(TYPE_VOLATILE, TYPE_CODE_SPACE, TYPE_DATA_SPACE,
TYPE_ADDRESS_CLASS_1, TYPE_ADDRESS_CLASS_2,
TYPE_ADDRESS_CLASS_ALL): Update.
(struct main_type) <flags>: Remove.
<flag_unsigned, flag_nosign, flag_stub, flag_target_stub,
flag_static, flag_prototyped, flag_incomplete, flag_varargs,
flag_vector, flag_stub_supported, flag_nottext,
flag_fixed_instance>: New fields.
<nfields, vptr_fieldno>: Move earlier.
(TYPE_FLAGS): Remove.
* gdbtypes.c (make_pointer_type): Update.
(address_space_name_to_int): Update.
(address_space_int_to_name): Update.
(make_type_with_address_space): Update.
(make_cv_type): Update.
(create_range_type): Update.
(get_discrete_bounds): Update.
(create_set_type): Update.
(make_vector_type): Update.
(smash_to_method_type): Update.
(check_typedef): Update.
(check_stub_method): Update.
(init_type): Individually assign flag fields.
(recursive_dump_type): Don't print entire TYPE_FLAGS field.  Do
print TYPE_FIXED_INSTANCE, TYPE_STUB_SUPPORTED, and TYPE_NOTTEXT.
(copy_type_recursive): Copy the entire main type.  Don't use
TYPE_FLAGS.
* features/rs6000/powerpc-altivec64l.c
(initialize_tdesc_powerpc_altivec64l): Update.
* features/rs6000/powerpc-altivec64.c
(initialize_tdesc_powerpc_altivec64): Update.
* features/rs6000/powerpc-altivec32l.c
(initialize_tdesc_powerpc_altivec32l): Update.
* features/rs6000/powerpc-altivec32.c
(initialize_tdesc_powerpc_altivec32): Update.
* features/rs6000/powerpc-7400.c (initialize_tdesc_powerpc_7400):
Update.
* features/arm-with-iwmmxt.c (initialize_tdesc_arm_with_iwmmxt):
Update.
* dwarf2read.c (read_structure_type): Update.
(read_enumeration_type): Likewise.
(process_enumeration_scope): Likewise.
(read_tag_pointer_type): Likewise.
(read_subroutine_type): Likewise.
(read_subroutine_type): Likewise.
(read_base_type): Likewise.
* coffread.c (coff_read_enum_type): Update.
* ada-valprint.c (adjust_type_signedness): Update.
* ada-typeprint.c (print_record_field_types): Update.
* ada-lang.c (packed_array_type): Update.
(empty_record): Don't reset TYPE_FLAGS.
(ada_template_to_fixed_record_type_1): Update.
(ada_template_to_fixed_record_type_1): Likewise.
(template_to_static_fixed_type): Likewise.
(to_record_with_fixed_variant_part): Likewise.
(to_fixed_record_type): Likewise.
(to_fixed_array_type): Likewise.
(to_static_fixed_type): Likewise.
gdb/testsuite:
* gdb.base/maint.exp: Update "maint print type".

* Makefile.am (chew.o): Delete rule.
($(MKDOC)): Move options before C file.
* Makefile.in: Regenerate.

Update a number of obsolete autoconf macros.

daily update

*** empty log message ***

2008-08-23  Jim Blandy  <jimb@redhat.com>

PR macros/607:
* symmisc.c (print_symbol_bcache_statistics): Include statistics
for the macro bcache.

* macrotab.h (struct macro_definition) <kind>: Shrink to one bit.
(argc): Now 31 bits.

(find_separate_debug_file): Use the canonical
absolute name of the bfd object for finding the debug file in
the global debugfile directory.

*** empty log message ***

daily update

* NEWS: Move macro entries back under "New commands".

        * config/tc-mcore.c (md_assemble): Increase length of name array
            to include terminating NUL.

* breakpoint.c (create_overlay_event_breakpoint): Rename to ...
(create_overlay_event_breakpoint_1): ... this.  Add OBJFILE parameter.
(create_overlay_event_breakpoint): Loop over all objfiles to install
multiple instances of the overlay event breakpoint if present.

* spu-tdep.c (spu_overlay_new_objfile): Only consider SPU objfiles.
(info_spu_event_command): Command only supported on SPU architecture.
(info_spu_signal_command): Likewise.
(info_spu_mailbox_command): Likewise.
(info_spu_dma_command): Likewise.
(info_spu_proxydma_command): Likewise.

* infrun.c (adjust_pc_after_break): Do not call get_thread_regcache
if the thread has already exited.

* infrun.c (proceed): Move back setting previous_inferior_ptid
from here ...
(wait_for_inferior): ... to here.
(fetch_inferior_event): ... and here.

* gdbarch.sh: Include "regcache.h" into gdbarch.c.
(deprecated_current_gdbarch_select_hack): Call registers_changed
instead of reinit_frame_cache.
* gdbarch.c: Regenerate.

bfd/
Fix PR ld/3290 regression for cross-files DW_FORM_ref_addr relocations.
* elflink.c (elf_link_add_object_symbols): Make debug symbols local
now only for non-RELOCATABLE targets.

ld/testsuite/
* ld-x86-64/dwarfreloc.exp, ld-x86-64/dwarfreloc.rd,
ld-x86-64/dwarfreloc1.s, ld-x86-64/dwarfreloc2.s: New test.

* config/bfin-lex.l (NUMBER): Protect special `.'.

testsuite/
* gas/bfin/misc.s: New test.
* gas/bfin/misc.d: New test.
* gas/bfin/bfin.exp: Add misc test.

* symbols.c (symbol_clone): Ensure clones are not external.

* config/tc-hppa.c (md_begin): Set BSF_KEEP for "dummy_symbol".

daily update

*** empty log message ***

* elfread.c (elf_symtab_read): Do not relocate thread-local symbols.

* xcoffread.c (SYMNAME_ALLOC): Correct syntax.

* findvar.c (locate_var_value): Do not call get_frame_arch
with a NULL frame argument.

* frame.h (frame_map_regnum_to_name): Remove prototype.
(frame_map_name_to_regnum): Remove prototype.
* frame.c (frame_map_regnum_to_name): Remove.
(frame_map_name_to_regnum): Remove.
(frame_unwind_register_value): Use user_reg_map_regnum_to_name
instead of frame_map_regnum_to_name.
* ax-gdb.c: Include "user-regs.h".
(gen_expr): Use user_reg_map_name_to_regnum instead of
frame_map_name_to_regnum.
* eval.c:  Include "user-regs.h".
(evaluate_subexp_standard): Use user_reg_map_name_to_regnum
instead of frame_map_name_to_regnum.
* infcmd.c (registers_info): Likewise.
* parse.c: Include "user-regs.h".
(write_dollar_variable): Use user_reg_map_name_to_regnum
instead of frame_map_name_to_regnum.
* tracepoint.c: Include "user-regs.h".
(encode_actions): Use user_reg_map_name_to_regnum
instead of frame_map_name_to_regnum.
* valops.c: Include "user-regs.h".
(value_fetch_lazy): Use user_reg_map_regnum_to_name instead
of frame_map_regnum_to_name.

* ppc-linux-tdep.c (ppc64_linux_convert_from_func_ptr_addr): Read
and manually relocate .opd contents from BFD instead of reading
them from target memory.

    * dw2gencfi.c (DWARF2_FDE_RELOC_SIZE): New.
        (output_cie, output_fde): Use it.
        (DWARF2_EH_FRAME_READ_ONLY): New.
        (cfi_finish): Use it.

        * config/tc-hppa.h (DWARF2_FDE_RELOC_SIZE): Set to 8 for 64-bit.
        (DWARF2_CIE_DATA_ALIGNMENT): Change sign.
        (DWARF2_EH_FRAME_READ_ONLY): New.
        * config/tc-hppa.c (tc_gen_reloc): Generate pc-relative relocations
        from the results of DIFF_EXPR_OK manipulation.

    * gas/cfi/cfi-common-1.d: Allow for differing offsets, and
        for DW_CFA_offset_extended_sf results.  Allow for differing nops.
        * gas/cfi/cfi-hppa-1.d: Invert data alignment sign.  Change
        offsets to match 64-bit offsets.
        * gas/cfi/cfi.exp: Don't run common tests on hppa64.

    * readelf.c (is_32bit_pcrel_reloc): Fix hppa entry.
        (is_64bit_pcrel_reloc): New.
        (debug_apply_relocations): Use it.  Handle hppa pcrel bias.

* dwarf2read.c (processing_current_prefix): Delete static
variable.
(process_full_comp_unit): Do not set processing_current_prefix.
(dwarf2_full_name): New function.
(read_func_scope): Do not set processing_current_prefix.  Use
determine_prefix.
(read_structure_type): Do not set processing_current_prefix.  Remove
unused inner cleanup.
(process_structure_scope): Do not set processing_current_prefix.
(read_enumeration_type): Use dwarf2_full_name.
(determine_class_name): Return a const char *.  Put the result
on the objfile obstack.  Use dwarf2_full_name.
(read_namespace_type): New function.
(read_namespace): Do not create the type here.  Use
determine_prefix.
(read_typedef): Use dwarf2_full_name.  Do not pass the name
to init_type.
(read_base_type): Do not pass the name to init_type.  Handle
TYPE_FLAG_NOSIGN.
(read_unspecified_type): Do not pass the name to init_type.
(new_symbol): Use dwarf2_full_name instead of
processing_current_prefix.
(read_type_die): Do not set processing_current_prefix.  Handle
DW_TAG_namespace.
(determine_prefix): Handle specifications.  Return the result
on the objfile obstack.  Handle unions correctly.

* buildsym.c (add_symbol_to_list): Do not call
cp_scan_for_anonymous_namespaces here.
(finish_block): Do not call cp_set_block_scope here.
* cp-namespace.c (processing_has_namespace_info)
(processing_current_prefix): Delete.
(cp_initialize_namespace): Do not initialize
processing_has_namespace_info.
(cp_scan_for_anonymous_namespaces): Use SYMBOL_DEMANGLED_NAME.  Do
not check processing_has_namespace_info.
(cp_set_block_scope): Take prefix and namespace info flag as
arguments.  Honor namespaces regardless of a demangled name.
* cp-support.h (processing_has_namespace_info)
(processing_current_prefix): Delete declarations.
(cp_set_block_scope): Update prototype.
* dwarf2read.c (processing_has_namespace_info)
(processing_current_prefix): New static variables.
(read_file_scope): Initialize processing_has_namespace_info.
(read_func_scope): Call cp_set_block_scope for C++.
(new_symbol): Call cp_scan_for_anonymous_namespaces for C++.
* symtab.c (symbol_demangled_name): Accept a const argument.
* symtab.h (symbol_demangled_name): Update prototype.

* ax-gdb.c (gen_var_ref): Use SYMBOL_LINKAGE_NAME.
* blockframe.c (find_pc_partial_function): Likewise.
* buildsym.c (find_symbol_in_list): Likewise.
* c-valprint.c (c_val_print): Likewise.
* coffread.c (patch_opaque_types, process_coff_symbol): Likewise.
(coff_read_enum_type): Likewise.  Use SYMBOL_SET_LINKAGE_NAME.
* cp-support.c (cp_remove_params): Renamed from remove_params and
made global.
(overload_list_add_symbol): Update call to remove_params.
* cp-support.h (cp_remove_params): Declare.
* dwarf2read.c (process_enumeration_scope): Use SYMBOL_LINKAGE_NAME.
(dwarf2_const_value): Use SYMBOL_PRINT_NAME.
* expprint.c (dump_subexp_body_standard): Likewise.
* f-valprint.c (info_common_command, there_is_a_visible_common_named):
Use SYMBOL_LINKAGE_NAME to find symbols and SYMBOL_PRINT_NAME
for messages.
* findvar.c (read_var_value): Use SYMBOL_LINKAGE_NAME.
* gnu-v2-abi.c (gnuv2_value_rtti_type): Likewise.
* hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline)
(hppa_hpux_skip_trampoline_code): Use SYMBOL_LINKAGE_NAME to find
symbols and SYMBOL_PRINT_NAME for messages.
* jv-lang.c (add_class_symbol): Use SYMBOL_SET_LINKAGE_NAME.
* linespec.c (decode_line_2): Use SYMBOL_LINKAGE_NAME.
* mdebugread.c (parse_symbol): Use SYMBOL_LINKAGE_NAME and
SYMBOL_SET_LINKAGE_NAME.
(mylookup_symbol): Use SYMBOL_LINKAGE_NAME.
* minsyms.c (add_minsym_to_demangled_hash_table): Use
SYMBOL_SEARCH_NAME.
(lookup_minimal_symbol): Use SYMBOL_LINKAGE_NAME or
SYMBOL_MATCHES_SEARCH_NAME, depending on the pass.
* objfiles.h (ALL_OBJFILE_MSYMBOLS): Use SYMBOL_LINKAGE_NAME.
* printcmd.c (build_address_symbolic): Use SYMBOL_LINKAGE_NAME.
(address_info): Use SYMBOL_PRINT_NAME for messages and
SYMBOL_LINKAGE_NAME for lookups.
* sol-thread.c (info_cb): Use SYMBOL_PRINT_NAME for messages.
* stabsread.c (patch_block_stabs, define_symbol)
(read_type, read_enum_type, common_block_end)
(cleanup_undefined_types_1, scan_file_globals): Use
SYMBOL_LINKAGE_NAME, SYMBOL_SET_LINKAGE_NAME, ALL_OBJFILE_MSYMBOLS,
and SYMBOL_PRINT_NAME.
* stack.c (print_frame_args): Use SYMBOL_LINKAGE_NAME.
(print_frame, frame_info): Use SYMBOL_PRINT_NAME for output.  Use
cp_remove_params instead of cplus_demangle.
(print_block_frame_labels, print_frame_arg_vars): Use
SYMBOL_LINKAGE_NAME.
* symmisc.c (dump_msymbols): Use ALL_OBJFILE_MSYMBOLS and
SYMBOL_LINKAGE_NAME.
(dump_symtab_1, print_symbol, print_partial_symbols)
(maintenance_check_symtabs): Use SYMBOL_LINKAGE_NAME.
* symtab.h (DEPRECATED_SYMBOL_NAME): Delete.
(SYMBOL_SET_LINKAGE_NAME): New.
(SYMBOL_SET_NAMES): Add a comment.
* tracepoint.c (set_traceframe_context, validate_actionline)
(collect_symbol, scope_info): Use SYMBOL_LINKAGE_NAME for
lookups and SYMBOL_PRINT_NAME for output.
* typeprint.c (typedef_print): Use SYMBOL_LINKAGE_NAME.
* xcoffread.c (process_xcoff_symbol): Use SYMBOL_SET_LINKAGE_NAME.

2008-08-21  Sterling Augustine  <sterling@tensilica.com>
* config/xtensa-istack.h (MAX_INSN_ARGS): Increase to 64.

* gdb.mi/mi-nonstop.exp: Fix the check for non-stop
support.  Adjust the order of "*running" notifications.
* gdb.mi/non-stop.c: Don't cast from int to void* and
back.

* arm-tdep.c (arm_pc_is_thumb): Use obj_section_addr.
* hppa-hpux-tdep.c (hppa_hpux_find_dummy_bpaddr): Likewise.
* hppa-linux-tdep.c (hppa_linux_find_global_pointer): Use
obj_section_addr and obj_section_endaddr.
* hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Likewise.
* hppabsd-tdep.c (hppabsd_find_global_pointer): Likewise.
* ia64-tdep.c (ia64_find_global_pointer): Likewise.
(find_extant_func_descr): Likewise.
* solib-frv.c (frv_relocate_main_executable): Use
obj_section_addr.
* xstormy16-tdep.c (xstormy16_find_jmp_table_entry): Use
obj_section_addr and obj_section_endaddr.

PR ld/6833
* ldexp.c (fold_binary <DATA_SEGMENT_ALIGN>): Do not align
EXPLD.DATASEG.MIN_BASE.
* ldlang.c (lang_size_sections): New variable OLD_BASE.  Rename
OLD_MIN_BASE to MIN_BASE with the former alignment from `ldexp.c'.
Use OLD_BASE now for the minimal base check after the base decrease by
the maximum alignment found.

* gdb.arch/powerpc-prologue.exp: Code doesn't save %r31 so don't
expect to find it in the "info frame" output.

Amplify last NEWS entry about boolean types in Ada, and add
corresponding description of treatment of True and false to gdb.texinfo.

2008-08-20  Craig Silverstein  <csilvers@google.com>

* fileread.cc (File_read::open): Do not lock the file unless it
was successfully opened.

daily update

*** empty log message ***

Commit file that I accidentally omitted from my change to support TLS on Xtensa.

2008-08-20  Bob Wilson  <bob.wilson@acm.org>
        * gas/all/gas.exp: Expect the redef test to fail on Xtensa.

2008-08-20  Bob Wilson  <bob.wilson@acm.org>
bfd/
        * elf-bfd.h (elf_object_id): Add XTENSA_ELF_TDATA.
        * elf32-xtensa.c (elf_howto_table): Add TLS relocations.
        (elf_xtensa_reloc_type_lookup): Likewise.
        (TCB_SIZE): Define.
        (elf_xtensa_link_hash_entry): New.
        (GOT_UNKNOWN, GOT_NORMAL, GOT_TLS_GD, GOT_TLS_IE, GOT_TLS_ANY): Define.
        (elf_xtensa_hash_entry): Define.
        (elf_xtensa_obj_tdata): New.
        (elf_xtensa_tdata): Define.
        (elf_xtensa_local_got_tls_type): Define.
        (elf_xtensa_local_tlsfunc_refcounts): Define.
        (is_xtensa_elf): Define.
        (elf_xtensa_mkobject): New.
        (elf_xtensa_link_hash_table): Add tlsbase field.
        (elf_xtensa_link_hash_newfunc): New.
        (elf_xtensa_link_hash_table_create): Use elf_xtensa_link_hash_newfunc.
        Create an entry for "_TLS_MODULE_BASE_" and save it in tlsbase field.
        (elf_xtensa_copy_indirect_symbol): New.
        (elf_xtensa_check_relocs): Rewrite to handle TLS relocations.
        (elf_xtensa_gc_sweep_hook): Likewise.
        (elf_xtensa_allocate_dynrelocs): Optimize away GOT entries for
        TLSDESC_FN relocations when an IE reference is seen.
        (elf_xtensa_allocate_local_got_size): Likewise.
        (elf_xtensa_always_size_sections): New.
        (dtpoff_base, tpoff): New.
        (elf_xtensa_do_reloc): Handle TLS relocations.
        (replace_tls_insn): New.
        (IS_XTENSA_TLS_RELOC): Define.
        (elf_xtensa_relocate_section): Handle TLS relocations.
        (get_indirect_call_dest_reg): New.
        (bfd_elf32_mkobject): Define.
        (elf_backend_always_size_sections): New.
        (elf_backend_copy_indirect_symbol): New.
        * reloc.c (BFD_RELOC_XTENSA_TLSDESC_FN, BFD_RELOC_XTENSA_TLSDESC_ARG)
        (BFD_RELOC_XTENSA_TLS_DTPOFF, BFD_RELOC_XTENSA_TLS_TPOFF)
        (BFD_RELOC_XTENSA_TLS_FUNC, BFD_RELOC_XTENSA_TLS_ARG)
        (BFD_RELOC_XTENSA_TLS_CALL): New.
        * bfd-in2.h: Regenerate.
        * libbfd.h: Regenerate.
gas/
        * config/tc-xtensa.c (O_tlsfunc, O_tlsarg, O_tlscall): Define.
        (O_tpoff, O_dtpoff): Define.
        (suffix_relocs): Add entries for TLS suffixes.
        (xtensa_elf_cons): Check for invalid use of TLS relocations.
        (map_operator_to_reloc): Add is_literal parameter and use it to
        control translating TLS instruction relocations to the corresponding
        literal relocations.
        (xg_valid_literal_expression): Allow TLS operators.
        (xg_build_to_insn): Copy TLS operators from pseudo-instruction
        operands to generated literals.
        (xg_assemble_literal): Handle TLS operators.  Update call to
        map_operator_to_reloc.
        (md_assemble): Handle CALLXn.TLS pseudo-instruction.
        (md_apply_fix): Handle TLS relocations.
        (emit_single_op): Handle TLS operators.
        (convert_frag_immed): Update call to map_operator_to_reloc.
        (vinsn_to_insnbuf): Emit relocations for TLS-related instructions.
        * config/xtensa-istack.h (tinsn_struct): Add tls_reloc field.
        * config/xtensa-relax.c (append_literal_op): Add src_op parameter
        to initialize the op_data field of the BuildOp.
        (build_transition): Use it here to record the source operand
        corresponding to a generated literal.
        * config/xtensa-relax.h (build_op): Comment op_data use for literals.
include/elf/
        * xtensa.h (R_XTENSA_TLSDESC_FN, R_XTENSA_TLSDESC_ARG)
        (R_XTENSA_TLS_DTPOFF, R_XTENSA_TLS_TPOFF, R_XTENSA_TLS_FUNC)
        (R_XTENSA_TLS_ARG, R_XTENSA_TLS_CALL): New.
ld/testsuite/
        * ld-xtensa/tlsbin.dd, ld-xtensa/tlsbin.rd, ld-xtensa/tlsbin.s,
        ld-xtensa/tlsbin.sd, ld-xtensa/tlsbin.td, ld-xtensa/tlslib.s,
        ld-xtensa/tlspic.dd, ld-xtensa/tlspic.rd, ld-xtensa/tlspic.sd,
        ld-xtensa/tlspic.td, ld-xtensa/tlspic1.s, ld-xtensa/tlspic2.s: New.
        * ld-xtensa/xtensa.exp: Run them.

* dwarf2read.c (die_specification, dwarf2_extension, follow_die_ref):
Make the dwarf2_cu * parameter output as well as input.  Update it if
we follow a reference to another CU.
(read_func_scope, determine_class_name, namespace_name, dwarf2_attr)
(die_type, die_containing_type): Update calls to changed functions.
Use the returned CU along with the returned DIE.
(read_namespace): Use dwarf2_attr instead of dwarf2_extension.

* dwarf2read.c (queue_comp_unit): Take an objfile argument.  Read
in the DIEs here.
(process_queue): Do not read in the DIEs here.
(psymtab_to_symtab_1): Update call to queue_comp_unit.
(read_full_die): Do not call queue_comp_unit from here.
(maybe_queue_comp_unit): New function.
(follow_die_ref): Use it.

* dwarf2read.c (struct attribute): Move earlier.
(struct die_info): Change attrs to a trailing array.
(dwarf_alloc_die): Take the number of attributes.  Allocate space
for them.
(read_full_die): Update call to dwarf_alloc_die.  Do not manually
allocate attributes.

* dwarf2read.c (REF_HASH_SIZE): Delete.
(struct dwarf2_cu): Replace die_ref_table with die_hash.
(struct die_info): Remove next_ref.
(store_in_ref_table): Remove offset argument.  Rewrite to use
htab_find_slot_with_hash.
(die_hash, die_eq): New.
(read_comp_unit): Allocate the die_hash.
(read_die_and_children): Update call to store_die_ref.
(follow_die_ref): Rewrite to use htab_find_with_hash.

* dwarf2read.c (free_die_list, copy_die): Delete.
(dwarf_alloc_die): Take a CU argument.  Allocate the new DIE
on the obstack.
(read_full_die): Update call to dwarf_alloc_die.  Allocate
attributes on the CU obstack.
(free_one_comp_unit): Do not call free_die_list.

* dwarf2read.c (read_die_and_children): Ignore NULL DIEs.
(read_die_and_siblings): Likewise.  Do not add padding DIEs to the
sibling list.
(read_full_die): Do not allocate DIEs for abbrev 0.
(follow_die_ref): Correct error message.

* gdb.base/interp.exp: Always consume both prompts.

Add the missing ChangeLog entry for the AES + AVX checkin.

gas/

2008-08-20  H.J. Lu  <hongjiu.lu@intel.com>

AVX Programming Reference (August, 2008)
* config/tc-i386.c (CPU_FLAGS_AES_MATCH): New.
(CPU_FLAGS_AVX_MATCH): Likewise.
(CPU_FLAGS_32BIT_MATCH): Updated.
(cpu_flags_match): Likewise.

gas/testsuite/

2008-08-20  H.J. Lu  <hongjiu.lu@intel.com>

AVX Programming Reference (August, 2008)
* gas/i386/avx.s: Add AES + AVX tests.
* gas/i386/arch-10.s: Likewise.
* gas/i386/sse2avx.s: Likewise.
* gas/i386/x86-64-arch-2.s: Likewise.
* gas/i386/x86-64-avx.s: Likewise.
* gas/i386/x86-64-sse2avx.s: Likewise.

* gas/i386/arch-10.d: Updated.
* gas/i386/arch-10-1.l: Likewise.
* gas/i386/arch-10-2.l: Likewise.
* gas/i386/arch-10-3.l: Likewise.
* gas/i386/arch-10-4.l: Likewise.
* gas/i386/avx.d: Likewise.
* gas/i386/avx-intel.d: Likewise.
* gas/i386/sse2avx.d: Likewise.
* gas/i386/x86-64-arch-2.d: Likewise.
* gas/i386/x86-64-avx.d: Likewise.
* gas/i386/x86-64-avx-intel.d: Likewise.
* gas/i386/x86-64-sse2avx.d: Likewise.

* gas/i386/i386.exp: Run arch-avx-1, arch-avx-1-1 and
arch-avx-1-2.

* gas/i386/arch-avx-1.d: New.
* gas/i386/arch-avx-1.s: Likewise.
* gas/i386/arch-avx-1-1.l: Likewise.
* gas/i386/arch-avx-1-1.s: Likewise.
* gas/i386/arch-avx-1-2.l: Likewise.
* gas/i386/arch-avx-1-2.s: Likewise.

opcodes/

2008-08-20  H.J. Lu  <hongjiu.lu@intel.com>

AVX Programming Reference (August, 2008)
* i386-dis.c (PREFIX_VEX_38DB): New.
(PREFIX_VEX_38DC): Likewise.
(PREFIX_VEX_38DD): Likewise.
(PREFIX_VEX_38DE): Likewise.
(PREFIX_VEX_38DF): Likewise.
(PREFIX_VEX_3ADF): Likewise.
(VEX_LEN_38DB_P_2): Likewise.
(VEX_LEN_38DC_P_2): Likewise.
(VEX_LEN_38DD_P_2): Likewise.
(VEX_LEN_38DE_P_2): Likewise.
(VEX_LEN_38DF_P_2): Likewise.
(VEX_LEN_3ADF_P_2): Likewise.
(PREFIX_VEX_3A04): Updated.
(VEX_LEN_3A06_P_2): Likewise.
(prefix_table): Add PREFIX_VEX_38DB, PREFIX_VEX_38DC,
PREFIX_VEX_38DD, PREFIX_VEX_38DE and PREFIX_VEX_3ADF.
(x86_64_table): Likewise.
(vex_len_table): Add VEX_LEN_38DB_P_2, VEX_LEN_38DC_P_2,
VEX_LEN_38DD_P_2, VEX_LEN_38DE_P_2, VEX_LEN_38DF_P_2 and
VEX_LEN_3ADF_P_2.

* i386-opc.tbl: Add AES + AVX instructions.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.

PR 6848
* write.c (install_reloc): Check that reloc symbols have been
written.
(set_symtab): Mark symbols with BSF_KEEP.

gdb/
* linespec.c (symtab_from_filename): Also throw NOT_FOUND_ERROR if
there are no symbols loaded, instead of throwing a generic error.
(decode_variable): Likewise.

gdb/testsuite/
* gdb.base/pending.exp: Test pending breakpoints without symbols
loaded.

* objfiles.h (struct obj_section): Remove addr and endaddr fields.
(obj_section_offset, obj_section_addr, obj_section_endaddr): New
macros.
* objfiles.c (add_to_objfile_sections): Don't set addr, endaddr
and offset.  Use size_t instead of unsigned long.
(build_objfile_section_table): Use size_t instead of unsigned
long.
(objfile_relocate): Don't relocate s->addr and s->endaddr, they're
gone.
(find_pc_sect_section): Use obj_section_addr and
obj_section_endaddr.
* symfile.c (symfile.c): Remove code that maps sections
offsets in "addr" to the object's sections.
* blockframe.c (find_pc_partial_function): Use obj_section_endaddr.
* gcore.c (gcore_create_callback): Use obj_section_addr and
obj_section_endaddr.
* maint.c (print_objfile_section_info): Likewise.
* printcmd.c (sym_info): Use obj_section_addr and
obj_section_endaddr.
* symtab.c (fixup_section): Likewise.

* Makefile.in: Remove page break; OpenBSD make chokes on them.

* sparc-tdep.c: Make some comments catch up with reality.