binutils-gdb.git
6 years agoAutomatic date update in version.in
GDB Administrator [Mon, 21 May 2018 00:00:50 +0000 (00:00 +0000)]
Automatic date update in version.in

6 years agoAutomatic date update in version.in
GDB Administrator [Sun, 20 May 2018 00:01:18 +0000 (00:01 +0000)]
Automatic date update in version.in

6 years agoRemove useless variable int i in backtrace_command_1
Philippe Waroquiers [Sat, 19 May 2018 06:54:44 +0000 (08:54 +0200)]
Remove useless variable int i in backtrace_command_1

value of int i was not used in the loop or after the loop.
Pushed as obvious.

6 years agoFix reference in comment: SRC_AND_LOC instead of LOC_AND_SRC
Philippe Waroquiers [Sat, 19 May 2018 06:38:57 +0000 (08:38 +0200)]
Fix reference in comment: SRC_AND_LOC instead of LOC_AND_SRC

Pushed as obvious

6 years agoAutomatic date update in version.in
GDB Administrator [Sat, 19 May 2018 00:00:39 +0000 (00:00 +0000)]
Automatic date update in version.in

6 years agox86: Don't set eh->local_ref to 1 for versioned symbol
H.J. Lu [Fri, 18 May 2018 21:23:41 +0000 (14:23 -0700)]
x86: Don't set eh->local_ref to 1 for versioned symbol

bfd_hide_sym_by_version can't be used to check if a versioned symbol is
hidden.  It has to be synced with _bfd_elf_link_assign_sym_version to
get the correct answer.

bfd/

PR ld/23194
* elfxx-x86.c (_bfd_x86_elf_link_symbol_references_local): Don't
set eh->local_ref to 1 if a symbol is versioned and there is a
version script.

ld/

PR ld/23194
* testsuite/ld-i386/i386.exp: Run pr23194.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr23194.d: New file.
* testsuite/ld-i386/pr23194.map: Likewise.
* testsuite/ld-i386/pr23194.s: Likewise.
* testsuite/ld-x86-64/pr23194.d: Likewise.
* testsuite/ld-x86-64/pr23194.map: Likewise.
* testsuite/ld-x86-64/pr23194.s: Likewise.

6 years agold: Run pr23189 for all targets
H.J. Lu [Fri, 18 May 2018 21:13:26 +0000 (14:13 -0700)]
ld: Run pr23189 for all targets

Since the pr23189 test isn't Linux specific, run it for all targets.

* testsuite/ld-i386/i386.exp: Run pr23189 for all targets.
* testsuite/ld-x86-64/x86-64.exp: Likewise.

6 years agoAllocate dwz_file with new
Tom Tromey [Wed, 16 May 2018 20:33:15 +0000 (14:33 -0600)]
Allocate dwz_file with new

This adds a constructor to struct dwz_file and arranges for it to be
allocated with "new" and wrapped in a unique_ptr.  This cuts down on
the amount of manual memory management that must be done.

Regression tested by the buildbot.

gdb/ChangeLog
2018-05-18  Tom Tromey  <tom@tromey.com>

* dwarf2read.c (struct dwz_file): Add constructor, initializers.
<dwz_bfd>: Now a gdb_bfd_ref_ptr.
(~dwarf2_per_objfile): Update
(dwarf2_get_dwz_file): Use new.
* dwarf2read.h (struct dwarf2_per_objfile) <dwz_file>: Now a
unique_ptr.

6 years agoRISC-V: Add RV32E support.
Jim Wilson [Fri, 18 May 2018 21:03:18 +0000 (14:03 -0700)]
RISC-V: Add RV32E support.

Kito Cheng  <kito.cheng@gmail.com>
Monk Chiang  <sh.chiang04@gmail.com>

bfd/
* elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Handle
EF_RISCV_RVE.

binutils/
* readelf.c (get_machine_flags): Handle EF_RISCV_RVE.

gas/
* config/tc-riscv.c (rve_abi): New.
(riscv_set_options): Add rve field.  Initialize it.
(riscv_set_rve) New function.
(riscv_set_arch): Support 'e' ISA subset.
(reg_lookup_internal): If rve, check register is available.
(riscv_set_abi): New parameter rve.
(md_parse_option): Pass new argument to riscv_set_abi.
(riscv_after_parse_args): Call riscv_set_rve.  If rve_abi, set
EF_RISCV_RVE.
* doc/c-riscv.texi (-mabi): Document new ilp32e argument.

include/
* elf/riscv.h (EF_RISCV_RVE): New define.

6 years agoAllocate dwp_file with new
Tom Tromey [Thu, 17 May 2018 06:04:53 +0000 (00:04 -0600)]
Allocate dwp_file with new

This adds a constructor and initializer to dwp_file and changes it to
be allocated with "new".  This removes a bit of manual refcount
management.

Tested by the buildbot.

gdb/ChangeLog
2018-05-18  Tom Tromey  <tom@tromey.com>

* dwarf2read.h (struct dwarf2_per_objfile) <dwp_file>: Now a
unique_ptr.
* dwarf2read.c (struct dwp_file): Add constructor and
initializers.
(open_and_init_dwp_file): Return a unique_ptr.
(dwarf2_per_objfile, create_dwp_hash_table)
(create_dwo_unit_in_dwp_v1, create_dwo_unit_in_dwp_v2)
(lookup_dwo_unit_in_dwp): Update.
(open_and_init_dwp_file, get_dwp_file): Update.

6 years agoUse new to allocate mapped_index
Tom Tromey [Thu, 17 May 2018 22:43:53 +0000 (16:43 -0600)]
Use new to allocate mapped_index

This changes struct mapped_index to be allocated with new.  This
simplifies the creation a bit (see dwarf2_read_index) and also removes
a somewhat ugly explicit destructor call from ~dwarf2_per_objfile.

Tested by the buildbot.

gdb/ChangeLog
2018-05-18  Tom Tromey  <tom@tromey.com>

* dwarf2read.c (dwarf2_per_objfile): Update.
(struct mapped_index): Add initializers.
(dwarf2_read_index): Use new.
(dw2_symtab_iter_init): Update.
* dwarf2read.h (struct dwarf2_per_objfile) <index_table>: Now a
unique_ptr.

6 years agoRISC-V: Fix ld-elf/pr22269* testcases.
Jim Wilson [Fri, 18 May 2018 20:05:21 +0000 (13:05 -0700)]
RISC-V: Fix ld-elf/pr22269* testcases.

bfd/
* elfnn-riscv.c (allocate_dynrelocs): Discard dynamic relocations if
UNDEFWEAK_NO_DYNAMIC_RELOC is true.
(riscv_elf_relocate_section): Don't generate dynamic relocation if
UNDEFWEAK_NO_DYNAMIC_RELOC is true.
(riscv_elf_finish_dynamic_symbol): Likewise.

6 years agoRemove mapped_index::total_size
Simon Marchi [Fri, 18 May 2018 20:02:44 +0000 (16:02 -0400)]
Remove mapped_index::total_size

It is unused.

gdb/ChangeLog:

* dwarf2read.c (mapped_index) <total_size>: Remove.

6 years agoformat_pieces-selftests.c: Silence ARI warnings
Simon Marchi [Fri, 18 May 2018 19:47:56 +0000 (15:47 -0400)]
format_pieces-selftests.c: Silence ARI warnings

Silence this:

unittests/format_pieces-selftests.c:51: warning: code: Do not use printf("%ll"), instead use printf("%s",phex()) to dump a `long long' value
unittests/format_pieces-selftests.c:56: warning: code: Do not use printf("%ll"), instead use printf("%s",phex()) to dump a `long long' value

gdb/ChangeLog:

* unittests/format_pieces-selftests.c (test_format_specifier):
Add ARI comments.

6 years agoShow padding in ptype/o output
Tom Tromey [Sat, 12 May 2018 23:04:50 +0000 (17:04 -0600)]
Show padding in ptype/o output

I was recently using ptype/o to look at the layout of some objects in
gdb.  I noticed that trailing padding was not shown -- but I wanted to
be able to look at that, too.

This patch changes ptype/o to also print trailing holes.

Tested on x86-64 Fedora 26.

gdb/ChangeLog
2018-05-18  Tom Tromey  <tom@tromey.com>

* c-typeprint.c (maybe_print_hole): New function.
(c_print_type_struct_field_offset): Update.
(c_type_print_base_struct_union): Call maybe_print_hole.

gdb/testsuite/ChangeLog
2018-05-18  Tom Tromey  <tom@tromey.com>

* gdb.base/ptype-offsets.exp: Update.

6 years agoAdd support for the Freescale s12z processor.
John Darrington [Fri, 18 May 2018 14:26:18 +0000 (15:26 +0100)]
Add support for the Freescale s12z processor.

bfd * Makefile.am: Add s12z files.
* Makefile.in: Regenerate.
* archures.c: Add bfd_s12z_arch.
* bfd-in.h: Add exports of bfd_putb24 and bfd_putl24.
* bfd-in2.h: Regenerate.
* config.bfd: Add s12z target.
* configure.ac: Add s12z target.
* configure: Regenerate.
* cpu-s12z.c: New file.
* elf32-s12z.c: New file.
* libbfd.c (bfd_putb24): New function.
(bfd_putl24): New function.
* libbfd.h: Regenerate.
* reloc.c: Add s12z relocations.
(bfd_get_reloc_size): Handle size 5 relocs.
* targets.c: Add s12z_elf32_vec.

opcodes * Makefile.am: Add support for s12z architecture.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* s12z-dis.c: New file.
* s12z.h: New file.

include * elf/s12z.h: New header.

ld * Makefile.am: Add support for s12z architecture.
* configure.tgt: Likewise.
* Makefile.in: Regenerate.
* emulparams/m9s12zelf.sh: New file.
* scripttempl/elfm9s12z.sc: New file.
* testsuite/ld-discard/static.d: Expect to fail for the s12z
target.
* testsuite/ld-elf/endsym.d: Likewise.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/pr14926.d: Skip for the s12z target.
* testsuite/ld-elf/sec64k.exp: Likewise.
* testsuite/ld-s12z: New directory.
* testsuite/ld-s12z/opr-linking.d: New file.
* testsuite/ld-s12z/opr-linking.s: New file.
* testsuite/ld-s12z/relative-linking.d: New file.
* testsuite/ld-s12z/relative-linking.s: New file.
* testsuite/ld-s12z/z12s.exp: New file.

gas * Makefile.am: Add support for s12z target.
* Makefile.in: Regenerate.
* NEWS: Mention the new support.
* config/tc-s12z.c: New file.
* config/tc-s12z.h: New file.
* configure.tgt: Add  s12z support.
* doc/Makefile.am: Likewise.
* doc/Makefile.in: Regenerate.
* doc/all.texi: Add s12z documentation.
* doc/as.textinfo: Likewise.
* doc/c-s12z.texi: New file.
* testsuite/gas/s12z: New directory.
* testsuite/gas/s12z/abs.d: New file.
* testsuite/gas/s12z/abs.s: New file.
* testsuite/gas/s12z/adc-imm.d: New file.
* testsuite/gas/s12z/adc-imm.s: New file.
* testsuite/gas/s12z/adc-opr.d: New file.
* testsuite/gas/s12z/adc-opr.s: New file.
* testsuite/gas/s12z/add-imm.d: New file.
* testsuite/gas/s12z/add-imm.s: New file.
* testsuite/gas/s12z/add-opr.d: New file.
* testsuite/gas/s12z/add-opr.s: New file.
* testsuite/gas/s12z/and-imm.d: New file.
* testsuite/gas/s12z/and-imm.s: New file.
* testsuite/gas/s12z/and-opr.d: New file.
* testsuite/gas/s12z/and-opr.s: New file.
* testsuite/gas/s12z/and-or-cc.d: New file.
* testsuite/gas/s12z/and-or-cc.s: New file.
* testsuite/gas/s12z/bfext-special.d: New file.
* testsuite/gas/s12z/bfext-special.s: New file.
* testsuite/gas/s12z/bfext.d: New file.
* testsuite/gas/s12z/bfext.s: New file.
* testsuite/gas/s12z/bit-manip.d: New file.
* testsuite/gas/s12z/bit-manip.s: New file.
* testsuite/gas/s12z/bit.d: New file.
* testsuite/gas/s12z/bit.s: New file.
* testsuite/gas/s12z/bra-expression-defined.d: New file.
* testsuite/gas/s12z/bra-expression-defined.s: New file.
* testsuite/gas/s12z/bra-expression-undef.d: New file.
* testsuite/gas/s12z/bra-expression-undef.s: New file.
* testsuite/gas/s12z/bra.d: New file.
* testsuite/gas/s12z/bra.s: New file.
* testsuite/gas/s12z/brclr-symbols.d: New file.
* testsuite/gas/s12z/brclr-symbols.s: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file.
* testsuite/gas/s12z/clb.d: New file.
* testsuite/gas/s12z/clb.s: New file.
* testsuite/gas/s12z/clr-opr.d: New file.
* testsuite/gas/s12z/clr-opr.s: New file.
* testsuite/gas/s12z/clr.d: New file.
* testsuite/gas/s12z/clr.s: New file.
* testsuite/gas/s12z/cmp-imm.d: New file.
* testsuite/gas/s12z/cmp-imm.s: New file.
* testsuite/gas/s12z/cmp-opr-inc.d: New file.
* testsuite/gas/s12z/cmp-opr-inc.s: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.s: New file.
* testsuite/gas/s12z/cmp-opr-reg.d: New file.
* testsuite/gas/s12z/cmp-opr-reg.s: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.s: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.d: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.s: New file.
* testsuite/gas/s12z/cmp-opr-xys.d: New file.
* testsuite/gas/s12z/cmp-opr-xys.s: New file.
* testsuite/gas/s12z/cmp-s-imm.d: New file.
* testsuite/gas/s12z/cmp-s-imm.s: New file.
* testsuite/gas/s12z/cmp-s-opr.d: New file.
* testsuite/gas/s12z/cmp-s-opr.s: New file.
* testsuite/gas/s12z/cmp-xy.d: New file.
* testsuite/gas/s12z/cmp-xy.s: New file.
* testsuite/gas/s12z/com-opr.d: New file.
* testsuite/gas/s12z/com-opr.s: New file.
* testsuite/gas/s12z/complex-shifts.d: New file.
* testsuite/gas/s12z/complex-shifts.s: New file.
* testsuite/gas/s12z/db-tb-cc-opr.d: New file.
* testsuite/gas/s12z/db-tb-cc-opr.s: New file.
* testsuite/gas/s12z/db-tb-cc-reg.d: New file.
* testsuite/gas/s12z/db-tb-cc-reg.s: New file.
* testsuite/gas/s12z/dbCC.d: New file.
* testsuite/gas/s12z/dbCC.s: New file.
* testsuite/gas/s12z/dec-opr.d: New file.
* testsuite/gas/s12z/dec-opr.s: New file.
* testsuite/gas/s12z/dec.d: New file.
* testsuite/gas/s12z/dec.s: New file.
* testsuite/gas/s12z/div.d: New file.
* testsuite/gas/s12z/div.s: New file.
* testsuite/gas/s12z/eor.d: New file.
* testsuite/gas/s12z/eor.s: New file.
* testsuite/gas/s12z/exg.d: New file.
* testsuite/gas/s12z/exg.s: New file.
* testsuite/gas/s12z/ext24-ld-xy.d: New file.
* testsuite/gas/s12z/ext24-ld-xy.s: New file.
* testsuite/gas/s12z/inc-opr.d: New file.
* testsuite/gas/s12z/inc-opr.s: New file.
* testsuite/gas/s12z/inc.d: New file.
* testsuite/gas/s12z/inc.s: New file.
* testsuite/gas/s12z/inh.d: New file.
* testsuite/gas/s12z/inh.s: New file.
* testsuite/gas/s12z/jmp.d: New file.
* testsuite/gas/s12z/jmp.s: New file.
* testsuite/gas/s12z/jsr.d: New file.
* testsuite/gas/s12z/jsr.s: New file.
* testsuite/gas/s12z/ld-imm-page2.d: New file.
* testsuite/gas/s12z/ld-imm-page2.s: New file.
* testsuite/gas/s12z/ld-imm.d: New file.
* testsuite/gas/s12z/ld-imm.s: New file.
* testsuite/gas/s12z/ld-immu18.d: New file.
* testsuite/gas/s12z/ld-immu18.s: New file.
* testsuite/gas/s12z/ld-large-direct.d: New file.
* testsuite/gas/s12z/ld-large-direct.s: New file.
* testsuite/gas/s12z/ld-opr.d: New file.
* testsuite/gas/s12z/ld-opr.s: New file.
* testsuite/gas/s12z/ld-s-opr.d: New file.
* testsuite/gas/s12z/ld-s-opr.s: New file.
* testsuite/gas/s12z/ld-small-direct.d: New file.
* testsuite/gas/s12z/ld-small-direct.s: New file.
* testsuite/gas/s12z/lea-immu18.d: New file.
* testsuite/gas/s12z/lea-immu18.s: New file.
* testsuite/gas/s12z/lea.d: New file.
* testsuite/gas/s12z/lea.s: New file.
* testsuite/gas/s12z/mac.d: New file.
* testsuite/gas/s12z/mac.s: New file.
* testsuite/gas/s12z/min-max.d: New file.
* testsuite/gas/s12z/min-max.s: New file.
* testsuite/gas/s12z/mod.d: New file.
* testsuite/gas/s12z/mod.s: New file.
* testsuite/gas/s12z/mov.d: New file.
* testsuite/gas/s12z/mov.s: New file.
* testsuite/gas/s12z/mul-imm.d: New file.
* testsuite/gas/s12z/mul-imm.s: New file.
* testsuite/gas/s12z/mul-opr-opr.d: New file.
* testsuite/gas/s12z/mul-opr-opr.s: New file.
* testsuite/gas/s12z/mul-opr.d: New file.
* testsuite/gas/s12z/mul-opr.s: New file.
* testsuite/gas/s12z/mul-reg.d: New file.
* testsuite/gas/s12z/mul-reg.s: New file.
* testsuite/gas/s12z/mul.d: New file.
* testsuite/gas/s12z/mul.s: New file.
* testsuite/gas/s12z/neg-opr.d: New file.
* testsuite/gas/s12z/neg-opr.s: New file.
* testsuite/gas/s12z/not-so-simple-shifts.d: New file.
* testsuite/gas/s12z/not-so-simple-shifts.s: New file.
* testsuite/gas/s12z/opr-18u.d: New file.
* testsuite/gas/s12z/opr-18u.s: New file.
* testsuite/gas/s12z/opr-expr.d: New file.
* testsuite/gas/s12z/opr-expr.s: New file.
* testsuite/gas/s12z/opr-ext-18.d: New file.
* testsuite/gas/s12z/opr-ext-18.s: New file.
* testsuite/gas/s12z/opr-idx-24-reg.d: New file.
* testsuite/gas/s12z/opr-idx-24-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-reg.d: New file.
* testsuite/gas/s12z/opr-idx3-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.d: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.s: New file.
* testsuite/gas/s12z/opr-indirect-expr.d: New file.
* testsuite/gas/s12z/opr-indirect-expr.s: New file.
* testsuite/gas/s12z/opr-symbol.d: New file.
* testsuite/gas/s12z/opr-symbol.s: New file.
* testsuite/gas/s12z/or-imm.d: New file.
* testsuite/gas/s12z/or-imm.s: New file.
* testsuite/gas/s12z/or-opr.d: New file.
* testsuite/gas/s12z/or-opr.s: New file.
* testsuite/gas/s12z/p2-mul.d: New file.
* testsuite/gas/s12z/p2-mul.s: New file.
* testsuite/gas/s12z/page2-inh.d: New file.
* testsuite/gas/s12z/page2-inh.s: New file.
* testsuite/gas/s12z/psh-pul.d: New file.
* testsuite/gas/s12z/psh-pul.s: New file.
* testsuite/gas/s12z/qmul.d: New file.
* testsuite/gas/s12z/qmul.s: New file.
* testsuite/gas/s12z/rotate.d: New file.
* testsuite/gas/s12z/rotate.s: New file.
* testsuite/gas/s12z/s12z.exp: New file.
* testsuite/gas/s12z/sat.d: New file.
* testsuite/gas/s12z/sat.s: New file.
* testsuite/gas/s12z/sbc-imm.d: New file.
* testsuite/gas/s12z/sbc-imm.s: New file.
* testsuite/gas/s12z/sbc-opr.d: New file.
* testsuite/gas/s12z/sbc-opr.s: New file.
* testsuite/gas/s12z/shift.d: New file.
* testsuite/gas/s12z/shift.s: New file.
* testsuite/gas/s12z/simple-shift.d: New file.
* testsuite/gas/s12z/simple-shift.s: New file.
* testsuite/gas/s12z/single-ops.d: New file.
* testsuite/gas/s12z/single-ops.s: New file.
* testsuite/gas/s12z/specd6.d: New file.
* testsuite/gas/s12z/specd6.s: New file.
* testsuite/gas/s12z/st-large-direct.d: New file.
* testsuite/gas/s12z/st-large-direct.s: New file.
* testsuite/gas/s12z/st-opr.d: New file.
* testsuite/gas/s12z/st-opr.s: New file.
* testsuite/gas/s12z/st-s-opr.d: New file.
* testsuite/gas/s12z/st-s-opr.s: New file.
* testsuite/gas/s12z/st-small-direct.d: New file.
* testsuite/gas/s12z/st-small-direct.s: New file.
* testsuite/gas/s12z/st-xy.d: New file.
* testsuite/gas/s12z/st-xy.s: New file.
* testsuite/gas/s12z/sub-imm.d: New file.
* testsuite/gas/s12z/sub-imm.s: New file.
* testsuite/gas/s12z/sub-opr.d: New file.
* testsuite/gas/s12z/sub-opr.s: New file.
* testsuite/gas/s12z/tfr.d: New file.
* testsuite/gas/s12z/tfr.s: New file.
* testsuite/gas/s12z/trap.d: New file.
* testsuite/gas/s12z/trap.s: New file.

binutils* readelf.c: Add support for s12z architecture.
* testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z
targets.

6 years agox86: Don't set eh->local_ref to 1 for linker defined symbols
H.J. Lu [Fri, 18 May 2018 13:43:19 +0000 (06:43 -0700)]
x86: Don't set eh->local_ref to 1 for linker defined symbols

Since symbols created by HIDDEN and PROVIDE_HIDDEN assignments in
linker script may be marked as defined, but not hidden, we can't
set eh->local_ref to 1 in _bfd_x86_elf_link_symbol_references_local.

Also R_386_GOT32X should be handled as just like R_386_GOT32 when
relocating a section.  The input R_386_GOT32X relocations, which
can be relaxed, should have been converted to R_386_PC32, R_386_32
or R_386_GOTOFF.

bfd/

PR ld/23189
* elf32-i386.c (elf_i386_relocate_section): Handle R_386_GOT32X
like R_386_GOT32.
* elfxx-x86.c (_bfd_x86_elf_link_symbol_references_local): Don't
set eh->local_ref to 1 for linker defined symbols.

ld/

PR ld/23189
* testsuite/ld-i386/i386.exp: Run pr23189.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr23189.d: New file.
* testsuite/ld-i386/pr23189.s: Likewise.
* testsuite/ld-i386/pr23189.t: Likewise.
* testsuite/ld-x86-64/pr23189.d: Likewise.
* testsuite/ld-x86-64/pr23189.s: Likewise.
* testsuite/ld-x86-64/pr23189.t: Likewise.

6 years agoPR23199, Invalid SHT_GROUP entry leads to group confusion
Alan Modra [Fri, 18 May 2018 07:39:45 +0000 (17:09 +0930)]
PR23199, Invalid SHT_GROUP entry leads to group confusion

This patch prevents elf_next_in_group list pointer confusion when
SHT_GROUP sections specify other SHT_GROUP sections in their list of
group sections.

PR 23199
* elf.c (setup_group): Formatting.  Check that SHT_GROUP entries
don't point at other SHT_GROUP sections.  Set shdr corresponding
to invalid entry, to NULL rather than section 0.  Identify
SHT_GROUP section index when reporting an error.  Cope with NULL
shdr pointer.

6 years agoATTRIBUTE_HIDDEN for libbfd.h
Alan Modra [Fri, 18 May 2018 02:05:18 +0000 (11:35 +0930)]
ATTRIBUTE_HIDDEN for libbfd.h

* libbfd-in.h (ATTRIBUTE_HIDDEN): Define and use throughout.
* configure.ac (HAVE_HIDDEN): Check compiler support for hidden
visibility.
* libbfd.h: Regenerate.
* configure: Regenerate.
* config.in: Regenerate.

6 years agolibbfd.h and libcoff.h include guards
Alan Modra [Thu, 17 May 2018 23:00:50 +0000 (08:30 +0930)]
libbfd.h and libcoff.h include guards

* libbfd-in.h: Add include guard.
* libcoff-in.h: Likewise.
* doc/Makefile.am (libbfd.h, libcoff.h): Append another #endif.
* doc/Makefile.in: Regenerate.
* libbfd.h: Regenerate.
* libcoff.h: Regenerate.

6 years agoopcodes sources should not include libbfd.h
Alan Modra [Thu, 17 May 2018 23:01:13 +0000 (08:31 +0930)]
opcodes sources should not include libbfd.h

* nfp-dis.c: Don't #include libbfd.h.
(init_nfp3200_priv): Use bfd_get_section_contents.
(nit_nfp6000_mecsr_sec): Likewise.

6 years agoAutomatic date update in version.in
GDB Administrator [Fri, 18 May 2018 00:00:41 +0000 (00:00 +0000)]
Automatic date update in version.in

6 years agoDon't elide all inlined frames
Keith Seitz [Thu, 17 May 2018 19:15:11 +0000 (12:15 -0700)]
Don't elide all inlined frames

This patch essentially causes GDB to treat inlined frames like "normal"
frames from the user's perspective.  This means, for example, that when a
user sets a breakpoint in an inlined function, GDB will now actually stop
"in" that function.

Using the test case from breakpoints/17534,

3 static inline void NVIC_EnableIRQ(int IRQn)
4 {
5   volatile int y;
6   y = IRQn;
7 }
8
9 __attribute__( ( always_inline ) ) static inline void __WFI(void)
10 {
11     __asm volatile ("nop");
12 }
13
14 int main(void) {
15
16     x= 42;
17
18     if (x)
19       NVIC_EnableIRQ(16);
20     else
21       NVIC_EnableIRQ(18);
(gdb) b NVIC_EnableIRQ
Breakpoint 1 at 0x4003e4: NVIC_EnableIRQ. (2 locations)
(gdb) r
Starting program: 17534

Breakpoint 1, main () at 17534.c:19
19       NVIC_EnableIRQ(16);

Because skip_inline_frames currently skips every inlined frame, GDB "stops"
in the caller.  This patch adds a new parameter to skip_inline_frames
that allows us to pass in a bpstat stop chain.  The breakpoint locations
on the stop chain can be used to determine if we've stopped inside an inline
function (due to a user breakpoint).  If we have, we do not elide the frame.

With this patch, GDB now reports that the inferior has stopped inside the
inlined function:

(gdb) r
Starting program: 17534

Breakpoint 1, NVIC_EnableIRQ (IRQn=16) at 17534.c:6
6   y = IRQn;

Many thanks to Jan and Pedro for guidance on this.

gdb/ChangeLog:

* breakpoint.c (build_bpstat_chain): New function, moved from
bpstat_stop_status.
(bpstat_stop_status): Add optional parameter, `stop_chain'.
If no stop chain is passed, call build_bpstat_chain to build it.
* breakpoint.h (build_bpstat_chain): Declare.
(bpstat_stop_status): Move documentation here from breakpoint.c.
* infrun.c (handle_signal_stop): Before eliding inlined frames,
build the stop chain and pass it to skip_inline_frames.
Pass this stop chain to bpstat_stop_status.
* inline-frame.c: Include breakpoint.h.
(stopped_by_user_bp_inline_frame): New function.
(skip_inline_frames): Add parameter `stop_chain'.
Move documention to inline-frame.h.
If non-NULL, use stopped_by_user_bp_inline_frame to determine
whether the frame should be elided.
* inline-frame.h (skip_inline_frames): Add parameter `stop_chain'.
Add moved documentation and update for new parameter.

gdb/testsuite/ChangeLog:

* gdb.ada/bp_inlined_func.exp: Update inlined frame locations
in expected breakpoint stop locations.
* gdb.dwarf2/implptr.exp (implptr_test_baz): Use up/down to
move to proper scope to test variable values.
* gdb.opt/inline-break.c (inline_func1, not_inline_func1)
(inline_func2, not_inline_func2, inline_func3, not_inline_func3):
New functions.
(main): Call not_inline_func3.
* gdb.opt/inline-break.exp: Start inferior and set breakpoints at
inline_func1, inline_func2, and inline_func3.  Test that when each
breakpoint is hit, GDB properly reports both the stop location
and the backtrace. Repeat tests for temporary breakpoints.

6 years agoMake format_pieces recognize the \e escape sequence
Simon Marchi [Thu, 17 May 2018 17:05:59 +0000 (13:05 -0400)]
Make format_pieces recognize the \e escape sequence

I noticed that the printf command did not recognize the \e escape
sequence, used amongst other things to use colors:

  (gdb) printf "This is \e[32mgreen\e[m!\n"
  Unrecognized escape character \e in format string.

This patch makes format_pieces recognize it, which makes that command
print the expected result in glorious color.

I wrote a really simple unit test for format_pieces.
format_pieces::operator[] is unused so I removed it.  I added
format_piece::operator==, which is needed to compare vectors of
format_piece.

gdb/ChangeLog:

PR cli/14975
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/format_pieces-selftests.c.
* common/format.h (format_piece) <operator==>: New.
(format_pieces) <operator[]>: Remove.
* common/format.c (format_pieces::format_pieces): Handle \e.
* unittests/format_pieces-selftests.c: New.

6 years agoFix for dwz-related crash
Tom Tromey [Thu, 12 Apr 2018 14:24:41 +0000 (08:24 -0600)]
Fix for dwz-related crash

PR symtab/23010 reports a crash that occurs when using -readnow
on a dwz-generated debuginfo file.

The crash occurs because the DWARF has a partial CU with no language
set, and then a full CU that references this partial CU using
DW_AT_abstract_origin.

In this case, the partial CU is read by dw2_expand_all_symtabs using
language_minimal; but then this conflicts with the creation of the
block's symbol table in the C++ CU.

This patch fixes the problem by arranging for partial CUs not to be
read by -readnow.  I tend to think that it doesn't make sense to read
a partial CU in isolation -- they should only be read when imported
into some other CU.

In conjunction with some other patches I am going to post, this also
fixes the Rust -readnow crash that Jan reported.

There are two problems with this patch:

1. It is difficult to reason about.  There are many cases where I've
   patched the code to call init_cutu_and_read_dies with the flag set
   to "please do read partial units" -- but I find it difficult to be
   sure that this is always correct.

2. It is still missing a standalone test case.  This seemed hard.

2018-05-17  Tom Tromey  <tom@tromey.com>

PR symtab/23010:
* dwarf2read.c (load_cu, dw2_do_instantiate_symtab)
(dw2_instantiate_symtab): Add skip_partial parameter.
(dw2_find_last_source_symtab, dw2_map_expand_apply)
(dw2_lookup_symbol, dw2_expand_symtabs_for_function)
(dw2_expand_all_symtabs, dw2_expand_symtabs_with_fullname)
(dw2_expand_symtabs_matching_one)
(dw2_find_pc_sect_compunit_symtab)
(dw2_debug_names_lookup_symbol)
(dw2_debug_names_expand_symtabs_for_function): Update.
(init_cutu_and_read_dies): Add skip_partial parameter.
(process_psymtab_comp_unit, build_type_psymtabs_1)
(process_skeletonless_type_unit, load_partial_comp_unit)
(psymtab_to_symtab_1): Update.
(load_full_comp_unit): Add skip_partial parameter.
(process_imported_unit_die, dwarf2_read_addr_index)
(follow_die_offset, dwarf2_fetch_die_loc_sect_off)
(dwarf2_fetch_constant_bytes, dwarf2_fetch_die_type_sect_off)
(read_signatured_type): Update.

6 years agoUpdated simplified Chinese translation for the opcodes directory.
Nick Clifton [Thu, 17 May 2018 15:24:42 +0000 (16:24 +0100)]
Updated simplified Chinese translation for the opcodes directory.

opcodes * po/zh_CN.po: Updated simplified Chinese translation.

6 years agovalue.c: Remove unused variables
Simon Marchi [Thu, 17 May 2018 13:52:08 +0000 (09:52 -0400)]
value.c: Remove unused variables

Obvious patch to remove unused local variables (found by adding
-Wunused).  I didn't touch this one in value_fetch_lazy, because
check_typedef could have a desired side-effect.

  3743  struct type *type = check_typedef (value_type (val));

gdb/ChangeLog:

* value.c (release_value): Remove unused variable.
(record_latest_value): Likewise.
(access_value_history): Likewise.
(preserve_values): Likewise.

6 years agoInitialize py_type_printers in ext_lang_type_printers
Tom Tromey [Wed, 16 May 2018 17:39:09 +0000 (11:39 -0600)]
Initialize py_type_printers in ext_lang_type_printers

When running gdb in the build directory without passing
--data-directory, I noticed I could provoke a crash by:

    $ ./gdb -nx ./gdb
    (gdb) ptype/o struct dwarf2_per_objfile

... and then trying to "q" out at the pagination prompt.

valgrind complained about an uninitialized use of py_type_printers.
Initializing this member fixes the bug.

I believe this bug can occur even when the gdb Python libraries are
available, for example if get_type_recognizers fails.

Tested by hand on x86-64 Fedora 26.  No test case because it seemed
difficult to guarantee failures.

gdb/ChangeLog
2018-05-17  Tom Tromey  <tom@tromey.com>

* extension.h (struct ext_lang_type_printers) <py_type_printers>:
Initialize.

6 years agoAutomatic date update in version.in
GDB Administrator [Thu, 17 May 2018 00:00:42 +0000 (00:00 +0000)]
Automatic date update in version.in

6 years agoPR gdb/22286: linux-nat-trad: Support arbitrary register widths
Maciej W. Rozycki [Wed, 16 May 2018 19:43:30 +0000 (20:43 +0100)]
PR gdb/22286: linux-nat-trad: Support arbitrary register widths

Update `fetch_register' and `store_register' code to support arbitrary
register widths rather than only ones that are a multiply of the size of
the `ptrace' data type used with PTRACE_PEEKUSR and PTRACE_POKEUSR
requests to access registers.  Remove associated assertions, correcting
an issue with accessing the DSPControl (`$dspctl') register on n64 MIPS
native targets:

(gdb) print /x $dspctl
.../gdb/linux-nat-trad.c:50: internal-error: void linux_nat_trad_target::fetch_register(regcache*, int): Assertion `(size % sizeof (PTRACE_TYPE_RET)) == 0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) n

This is a bug, please report it.  For instructions, see:
<http://www.gnu.org/software/gdb/bugs/>.

.../gdb/linux-nat-trad.c:50: internal-error: void linux_nat_trad_target::fetch_register(regcache*, int): Assertion `(size % sizeof (PTRACE_TYPE_RET)) == 0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Create a core file of GDB? (y or n) n
Command aborted.
(gdb)

All registers are now reported correctly and their architectural
hardware widths respected:

(gdb) print /x $dspctl
$1 = 0x55aa33cc
(gdb) info registers
                  zero               at               v0               v1
 R0   0000000000000000 0000000000000001 000000fff7ffeb20 0000000000000000
                    a0               a1               a2               a3
 R4   0000000000000001 000000ffffffeaf8 000000ffffffeb08 0000000000000000
                    a4               a5               a6               a7
 R8   000000fff7ee3800 000000fff7ede8f0 000000ffffffeaf0 2f2f2f2f2f2f2f2f
                    t0               t1               t2               t3
 R12  0000000000000437 0000000000000002 000000fff7ffd000 0000000120000ad0
                    s0               s1               s2               s3
 R16  000000fff7ee2068 0000000120000e60 0000000000000000 0000000000000000
                    s4               s5               s6               s7
 R20  0000000000521ec8 0000000000522608 0000000000000000 0000000000000000
                    t8               t9               k0               k1
 R24  0000000000000000 0000000120000d9c 0000000000000000 0000000000000000
                    gp               sp               s8               ra
 R28  0000000120019030 000000ffffffe990 000000ffffffe990 000000fff7d5b88c
                status               lo               hi         badvaddr
      0000000000109cf3 0000000000005ea5 0000000000000211 000000fff7fc6fe0
                 cause               pc
      0000000000800024 0000000120000dbc
                  fcsr              fir              hi1              lo1
              00000000         00f30000 0000000000000000 0101010101010101
                   hi2              lo2              hi3              lo3
      0202020202020202 0303030303030303 0404040404040404 0505050505050505
                dspctl          restart
              55aa33cc 0000000000000000
(gdb)

NB due to the lack of access to 64-bit DSP hardware all DSP register
values in the dumps are artificial and have been created with a debug
change applied to the kernel handler of the `ptrace' syscall.

The use of `store_unsigned_integer' and `extract_unsigned_integer'
unconditionally in all cases rather than when actual data occupies a
part of the data quantity exchanged with `ptrace' makes code perhaps
marginally slower, however I think avoiding it is not worth code
obfuscation it would cause.  If this turns out unfounded, then there
should be no problem with optimizing this code later.

gdb/
PR gdb/22286
* linux-nat-trad.c (linux_nat_trad_target::fetch_register):
Also handle registers whose width is not a multiple of
PTRACE_TYPE_RET.
(linux_nat_trad_target::store_register): Likewise.

6 years agoNDS32/GAS: Correct an `expr' global shadowing error for pre-4.8 GCC
Maciej W. Rozycki [Wed, 16 May 2018 19:43:29 +0000 (20:43 +0100)]
NDS32/GAS: Correct an `expr' global shadowing error for pre-4.8 GCC

Remove `-Wshadow' compilation errors:

cc1: warnings being treated as errors
.../gas/config/tc-nds32.c: In function 'md_assemble':
.../gas/config/tc-nds32.c:5212: error: declaration of 'expr' shadows a global declaration
.../gas/expr.h:180: error: shadowed declaration is here
make[4]: *** [tc-nds32.o] Error 1

which for versions of GCC before 4.8 prevent support for NDS32 targets
from being built.  See also GCC PR c/53066.

gas/
* tc-nds32.c (md_assemble): Rename `expr' local variable to
`insn_expr'.

6 years agoNDS32/BFD: Fix build error in `nds32_convert_32_to_16'
Maciej W. Rozycki [Wed, 16 May 2018 19:43:29 +0000 (20:43 +0100)]
NDS32/BFD: Fix build error in `nds32_convert_32_to_16'

Fix:

cc1: warnings being treated as errors
.../bfd/elf32-nds32.c: In function 'nds32_convert_32_to_16':
.../bfd/elf32-nds32.c:6816: error: 'insn_type' may be used uninitialized in this function
make[4]: *** [elf32-nds32.lo] Error 1

seen with GCC 4.1.2 and 4.4.7.

bfd/
* elf32-nds32.c (nds32_convert_32_to_16): Preset `insn_type'.

6 years agoMake "cbfd" a gdb_bfd_ref_ptr
Tom Tromey [Fri, 11 May 2018 18:36:19 +0000 (12:36 -0600)]
Make "cbfd" a gdb_bfd_ref_ptr

This changes program_space::cbfd to be a gdb_bfd_ref_ptr.  This makes
it somewhat less error-prone to use, because now it manages the
reference counting automatically.

Tested by the buildbot.

2018-05-16  Tom Tromey  <tom@tromey.com>

* gdbcore.h (core_bfd): Redefine.
* corelow.c (core_target::close): Update.
(core_target_open): Update.
* progspace.h (struct program_space) <cbfd>: Now a
gdb_bfd_ref_ptr.

6 years agoUse a distinguishing name for minidebug objfile
Tom Tromey [Tue, 14 Jun 2016 11:46:56 +0000 (12:46 +0100)]
Use a distinguishing name for minidebug objfile

One part of PR cli/19551 is that the mini debug info objfile reuses the
name of the main objfile from which it comes.  This can be seen because
gdb claims to be reading symbols from the same file two times, like:

Reading symbols from /bin/gdb...Reading symbols from /bin/gdb...(no debugging symbols found)...done.

I think this would be less confusing if the minidebug objfile were given
a different name.  That is what this patch implements.  It also arranges
for the minidebug objfile to be marked OBJF_NOT_FILENAME.

After this patch the output looks like:

Reading symbols from /bin/gdb...Reading symbols from .gnu_debugdata for /usr/libexec/gdb...(no debugging symbols found)...done.

Tested by the buildbot.

gdb/ChangeLog
2018-05-16  Tom Tromey  <tom@tromey.com>

PR cli/19551:
* symfile-add-flags.h (enum symfile_add_flags)
<SYMFILE_NOT_FILENAME>: New constant.
* symfile.c (read_symbols): Use SYMFILE_NOT_FILENAME.  Get
objfile name from BFD.
(symbol_file_add_with_addrs): Check SYMFILE_NOT_FILENAME.
* minidebug.c (find_separate_debug_file_in_section): Put
".gnu_debugdata" into BFD's file name.

6 years agoregcache.c: Remove unused typedefs
Simon Marchi [Wed, 16 May 2018 16:41:19 +0000 (12:41 -0400)]
regcache.c: Remove unused typedefs

gdb/ChangeLog:

* regcache.c (regcache_read_ftype, regcache_write_ftype):
Remove.

6 years agoPR22458, failure to choose a matching ELF target
Alan Modra [Wed, 16 May 2018 02:03:48 +0000 (11:33 +0930)]
PR22458, failure to choose a matching ELF target

https://sourceware.org/ml/binutils/2013-05/msg00271.html was supposed
to banish "file format is ambiguous" errors for ELF.  It didn't,
because the code supposedly detecting formats that implement
match_priority didn't work.  That was due to not placing all matching
targets into the vector of matching targets.  ELF objects should all
match the generic ELF target (priority 2), plus one or more machine
specific targets (priority 1), and perhaps a single machine specific
target with OS/ABI set (priority 0, best match).  So the armel object
in the testcase actually matches elf32-littlearm,
elf32-littlearm-symbian, and elf32-littlearm-vxworks (all priority 1),
and elf32-little (priority 2).  As the PR reported, elf32-little
wasn't seen as matching.  Fixing that part of the problem wasn't too
difficult but matching the generic ELF target as well as the ARM ELF
targets resulted in ARM testsuite failures.

These proved to be the annoying reordering of stubs that occurs from
time to time due to the stub names containing the section id.
Matching another target causes more sections to be created in
elf_object_p.  If section ids change, stub names change, which results
in different hashing and can therefore result in different hash table
traversal and stub creation order.  That particular problem is fixed
by resetting section_id to the initial state before attempting each
target match, and taking a snapshot of its value after a successful
match.

PR 22458
* format.c (struct bfd_preserve): Add section_id.
(bfd_preserve_save, bfd_preserve_restore): Save and restore
_bfd_section_id.
(bfd_reinit): Set _bfd_section_id.
(bfd_check_format_matches): Put all matches of any priority into
matching_vector.  Save initial section id and start each attempted
match at that section id.
* libbfd-in.h (_bfd_section_id): Declare.
* section.c (_bfd_section_id): Rename from section_id and make
global.  Adjust uses.
(bfd_get_next_section_id): Delete.
* elf64-ppc.c (ppc64_elf_setup_section_lists): Replace use of
bfd_get_section_id with _bfd_section_id.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.

6 years agoFix disassembly mask for vector sdot on AArch64.
Tamar Christina [Wed, 16 May 2018 11:13:42 +0000 (12:13 +0100)]
Fix disassembly mask for vector sdot on AArch64.

This patch corrects the disassembly masks for by element dot product
instructions. The bit 10 was wrong and supposed to be 1.

This caused incorrect disassembly of instructions in the unallocated space to
disassemble as dot product instructions.

No encoding errors can arrise from this issue.

opcodes/

PR binutils/23109
* aarch64-tbl.h (aarch64_opcode_table): Correct sdot and udot.
* aarch64-dis-2.c: Regenerate.

6 years agoAutomatic date update in version.in
GDB Administrator [Wed, 16 May 2018 00:00:40 +0000 (00:00 +0000)]
Automatic date update in version.in

6 years agoImplement Read/Write constraints on system registers on AArch64
Tamar Christina [Tue, 15 May 2018 15:37:20 +0000 (16:37 +0100)]
Implement Read/Write constraints on system registers on AArch64

This patch adds constraints for read and write only system registers with the
msr and mrs instructions.  The code will treat having both flags set and none
set as the same.  These flags add constraints that must be matched up. e.g. a
system register with a READ only flag set, can only be used with mrs.  If The
constraint fails a warning is emitted.

Examples of the warnings generated:

test.s: Assembler messages:
test.s:5: Warning: specified register cannot be written to at operand 1 -- `msr dbgdtrrx_el0,x3'
test.s:7: Warning: specified register cannot be read from at operand 2 -- `mrs x3,dbgdtrtx_el0'
test.s:8: Warning: specified register cannot be written to at operand 1 -- `msr midr_el1,x3'

and disassembly notes:

0000000000000000 <main>:
   0: d5130503  msr dbgdtrtx_el0, x3
   4: d5130503  msr dbgdtrtx_el0, x3
   8: d5330503  mrs x3, dbgdtrrx_el0
   c: d5330503  mrs x3, dbgdtrrx_el0
  10: d5180003  msr midr_el1, x3 ; note: writing to a read-only register.

Note that because dbgdtrrx_el0 and dbgdtrtx_el0 have the same encoding, during
disassembly the constraints are use to disambiguate between the two.  An exact
constraint match is always prefered over partial ones if available.

As always the warnings can be suppressed with -w and also be made errors using
warnings as errors.

binutils/

PR binutils/21446
* doc/binutils.texi (-M): Document AArch64 options.

gas/

PR binutils/21446
* testsuite/gas/aarch64/illegal-sysreg-2.s: Fix pmbidr_el1 test.
* testsuite/gas/aarch64/illegal-sysreg-2.l: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-2.d: Likewise.
* testsuite/gas/aarch64/sysreg-diagnostic.s: New.
* testsuite/gas/aarch64/sysreg-diagnostic.l: New.
* testsuite/gas/aarch64/sysreg-diagnostic.d: New.

include/

PR binutils/21446
* opcode/aarch64.h (F_SYS_READ, F_SYS_WRITE): New.

opcodes/

PR binutils/21446
* aarch64-asm.c (opintl.h): Include.
(aarch64_ins_sysreg): Enforce read/write constraints.
* aarch64-dis.c (aarch64_ext_sysreg): Likewise.
* aarch64-opc.h (F_DEPRECATED, F_ARCHEXT, F_HASXT): Moved here.
(F_REG_READ, F_REG_WRITE): New.
* aarch64-opc.c (aarch64_print_operand): Generate notes for
AARCH64_OPND_SYSREG.
(F_DEPRECATED, F_ARCHEXT, F_HASXT): Move to aarch64-opc.h.
(aarch64_sys_regs): Add constraints to currentel, midr_el1, ctr_el0,
mpidr_el1, revidr_el1, aidr_el1, dczid_el0, id_dfr0_el1, id_pfr0_el1,
id_pfr1_el1, id_afr0_el1, id_mmfr0_el1, id_mmfr1_el1, id_mmfr2_el1,
id_mmfr3_el1, id_mmfr4_el1, id_isar0_el1, id_isar1_el1, id_isar2_el1,
id_isar3_el1, id_isar4_el1, id_isar5_el1, mvfr0_el1, mvfr1_el1,
mvfr2_el1, ccsidr_el1, id_aa64pfr0_el1, id_aa64pfr1_el1,
id_aa64dfr0_el1, id_aa64dfr1_el1, id_aa64isar0_el1, id_aa64isar1_el1,
id_aa64mmfr0_el1, id_aa64mmfr1_el1, id_aa64mmfr2_el1, id_aa64afr0_el1,
id_aa64afr0_el1, id_aa64afr1_el1, id_aa64zfr0_el1, clidr_el1,
csselr_el1, vsesr_el2, erridr_el1, erxfr_el1, rvbar_el1, rvbar_el2,
rvbar_el3, isr_el1, tpidrro_el0, cntfrq_el0, cntpct_el0, cntvct_el0,
mdccsr_el0, dbgdtrrx_el0, dbgdtrtx_el0, osdtrrx_el1, osdtrtx_el1,
mdrar_el1, oslar_el1, oslsr_el1, dbgauthstatus_el1, pmbidr_el1,
pmsidr_el1, pmswinc_el0, pmceid0_el0, pmceid1_el0.
* aarch64-tbl.h (aarch64_opcode_table): Add constraints to
msr (F_SYS_WRITE), mrs (F_SYS_READ).

6 years agoAllow non-fatal errors to be emitted and for disassembly notes be placed on AArch64
Tamar Christina [Tue, 15 May 2018 15:34:54 +0000 (16:34 +0100)]
Allow non-fatal errors to be emitted and for disassembly notes be placed on AArch64

This patch adds a new platform option "notes" that can be used to indicate if
disassembly notes should be placed in the disassembly as comments.

These notes can contain information about a failing constraint such as reading
from a write-only register.  The disassembly will not be blocked because of this
but -M notes will emit a comment saying that the operation is not allowed.

For assembly this patch adds a new non-fatal status for errors.  This is
essentially a warning.  The reason for not creating an actual warning type is
that this causes the interaction between the ordering of warnings and errors to
be problematic.  Currently the error buffer is almost always filled because of
the way operands are matched during assembly. An earlier template may have put
an error there that would only be displayed if no other template matches or
generates a higher priority error.  But by definition a warning is lower
priority than a warning, so the error (which is incorrect if another template
matched) will supersede the warning.  By treating warnings as errors and only
later relaxing the severity this relationship keeps working and the existing
reporting infrastructure can be re-used.

binutils/

PR binutils/21446
* doc/binutils.texi (-M): Document AArch64 options.
* NEWS: Document notes and warnings.

gas/

PR binutils/21446
* config/tc-aarch64.c (print_operands): Indicate no notes.
(output_operand_error_record): Support non-fatal errors.
(output_operand_error_report, warn_unpredictable_ldst, md_assemble):
Likewise.

include/

PR binutils/21446
* opcode/aarch64.h (aarch64_operand_error): Add non_fatal.
(aarch64_print_operand): Support notes.

opcodes/

PR binutils/21446
* aarch64-dis.c (no_notes: New.
(parse_aarch64_dis_option): Support notes.
(aarch64_decode_insn, print_operands): Likewise.
(print_aarch64_disassembler_options): Document notes.
* aarch64-opc.c (aarch64_print_operand): Support notes.

6 years agoModify AArch64 Assembly and disassembly functions to be able to fail and report why.
Tamar Christina [Tue, 15 May 2018 15:11:42 +0000 (16:11 +0100)]
Modify AArch64 Assembly and disassembly functions to be able to fail and report why.

This patch if the first patch in a series to add the ability to add constraints
to system registers that an instruction must adhere to in order for the register
to be usable with that instruction.

These constraints can also be used to disambiguate between registers with the
same encoding during disassembly.

This patch adds a new flags entry in the sysreg structures and ensures it is
filled in and read out during assembly/disassembly. It also adds the ability for
the assemble and disassemble functions to be able to gracefully fail and re-use
the existing error reporting infrastructure.

The return type of these functions are changed to a boolean to denote success or
failure and the error structure is passed around to them. This requires
aarch64-gen changes so a lot of the changes here are just mechanical.

gas/

PR binutils/21446
* config/tc-aarch64.c (parse_sys_reg): Return register flags.
(parse_operands): Fill in register flags.

gdb/

PR binutils/21446
* aarch64-tdep.c (aarch64_analyze_prologue,
aarch64_software_single_step, aarch64_displaced_step_copy_insn):
Indicate not interested in errors.

include/

PR binutils/21446
* opcode/aarch64.h (aarch64_opnd_info): Change sysreg to struct.
(aarch64_decode_insn): Accept error struct.

opcodes/

PR binutils/21446
* aarch64-asm.h (aarch64_insert_operand, aarch64_##x): Return boolean
and take error struct.
* aarch64-asm.c (aarch64_ext_regno, aarch64_ins_reglane,
aarch64_ins_reglist, aarch64_ins_ldst_reglist,
aarch64_ins_ldst_reglist_r, aarch64_ins_ldst_elemlist,
aarch64_ins_advsimd_imm_shift, aarch64_ins_imm, aarch64_ins_imm_half,
aarch64_ins_advsimd_imm_modified, aarch64_ins_fpimm,
aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2, aarch64_ins_fbits,
aarch64_ins_aimm, aarch64_ins_limm_1, aarch64_ins_limm,
aarch64_ins_inv_limm, aarch64_ins_ft, aarch64_ins_addr_simple,
aarch64_ins_addr_regoff, aarch64_ins_addr_offset, aarch64_ins_addr_simm,
aarch64_ins_addr_simm10, aarch64_ins_addr_uimm12,
aarch64_ins_simd_addr_post, aarch64_ins_cond, aarch64_ins_sysreg,
aarch64_ins_pstatefield, aarch64_ins_sysins_op, aarch64_ins_barrier,
aarch64_ins_prfop, aarch64_ins_hint, aarch64_ins_reg_extended,
aarch64_ins_reg_shifted, aarch64_ins_sve_addr_ri_s4xvl,
aarch64_ins_sve_addr_ri_s6xvl, aarch64_ins_sve_addr_ri_s9xvl,
aarch64_ins_sve_addr_ri_s4, aarch64_ins_sve_addr_ri_u6,
aarch64_ins_sve_addr_rr_lsl, aarch64_ins_sve_addr_rz_xtw,
aarch64_ins_sve_addr_zi_u5, aarch64_ext_sve_addr_zz,
aarch64_ins_sve_addr_zz_lsl, aarch64_ins_sve_addr_zz_sxtw,
aarch64_ins_sve_addr_zz_uxtw, aarch64_ins_sve_aimm,
aarch64_ins_sve_asimm, aarch64_ins_sve_index, aarch64_ins_sve_limm_mov,
aarch64_ins_sve_quad_index, aarch64_ins_sve_reglist,
aarch64_ins_sve_scale, aarch64_ins_sve_shlimm, aarch64_ins_sve_shrimm,
aarch64_ins_sve_float_half_one, aarch64_ins_sve_float_half_two,
aarch64_ins_sve_float_zero_one, aarch64_opcode_encode): Likewise.
* aarch64-dis.h (aarch64_extract_operand, aarch64_##x): Likewise.
* aarch64-dis.c (aarch64_ext_regno, aarch64_ext_reglane,
aarch64_ext_reglist, aarch64_ext_ldst_reglist,
aarch64_ext_ldst_reglist_r, aarch64_ext_ldst_elemlist,
aarch64_ext_advsimd_imm_shift, aarch64_ext_imm, aarch64_ext_imm_half,
aarch64_ext_advsimd_imm_modified, aarch64_ext_fpimm,
aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2, aarch64_ext_fbits,
aarch64_ext_aimm, aarch64_ext_limm_1, aarch64_ext_limm, decode_limm,
aarch64_ext_inv_limm, aarch64_ext_ft, aarch64_ext_addr_simple,
aarch64_ext_addr_regoff, aarch64_ext_addr_offset, aarch64_ext_addr_simm,
aarch64_ext_addr_simm10, aarch64_ext_addr_uimm12,
aarch64_ext_simd_addr_post, aarch64_ext_cond, aarch64_ext_sysreg,
aarch64_ext_pstatefield, aarch64_ext_sysins_op, aarch64_ext_barrier,
aarch64_ext_prfop, aarch64_ext_hint, aarch64_ext_reg_extended,
aarch64_ext_reg_shifted, aarch64_ext_sve_addr_ri_s4xvl,
aarch64_ext_sve_addr_ri_s6xvl, aarch64_ext_sve_addr_ri_s9xvl,
aarch64_ext_sve_addr_ri_s4, aarch64_ext_sve_addr_ri_u6,
aarch64_ext_sve_addr_rr_lsl, aarch64_ext_sve_addr_rz_xtw,
aarch64_ext_sve_addr_zi_u5, aarch64_ext_sve_addr_zz,
aarch64_ext_sve_addr_zz_lsl, aarch64_ext_sve_addr_zz_sxtw,
aarch64_ext_sve_addr_zz_uxtw, aarch64_ext_sve_aimm,
aarch64_ext_sve_asimm, aarch64_ext_sve_index, aarch64_ext_sve_limm_mov,
aarch64_ext_sve_quad_index, aarch64_ext_sve_reglist,
aarch64_ext_sve_scale, aarch64_ext_sve_shlimm, aarch64_ext_sve_shrimm,
aarch64_ext_sve_float_half_one, aarch64_ext_sve_float_half_two,
aarch64_ext_sve_float_zero_one, aarch64_opcode_decode): Likewise.
(determine_disassembling_preference, aarch64_decode_insn,
print_insn_aarch64_word, print_insn_data): Take errors struct.
(print_insn_aarch64): Use errors.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-gen.c (print_operand_inserter): Use errors and change type to
boolean in aarch64_insert_operan.
(print_operand_extractor): Likewise.
* aarch64-opc.c (aarch64_print_operand): Use sysreg struct.

6 years agoMIPS/Linux/native: Supply $zero for the !PTRACE_GETREGS case
Maciej W. Rozycki [Tue, 15 May 2018 15:26:07 +0000 (16:26 +0100)]
MIPS/Linux/native: Supply $zero for the !PTRACE_GETREGS case

With native MIPS/Linux targets the $zero register is inaccessible, with
its supposed context slot provided by the OS occupied by the $restart
register.  The PTRACE_GETREGS path takes care of it by artificially
supplying the hardwired contents of $zero in `mips_supply_gregset' or
`mips64_supply_gregset', as applicable, however the PTRACE_PEEKUSER
fallback does not, making the register unavailable, e.g.:

(gdb) info registers
         zero       at       v0       v1       a0       a1       a2       a3
R0    <unavl> 00000001 00000001 d2f1a9fc 00000000 00000000 00417158 00417150
           t0       t1       t2       t3       t4       t5       t6       t7
R8   00000004 00000000 fffffff8 00000000 00000000 00000000 00000001 00000007
           s0       s1       s2       s3       s4       s5       s6       s7
R16  00000000 00405e30 00000000 00500000 00000000 0052ec08 00000000 00000000
           t8       t9       k0       k1       gp       sp       s8       ra
R24  00000000 00417008 00000000 00000000 0041e220 7fff4ce0 7fff4ce0 00405d0c
       status       lo       hi badvaddr    cause       pc
      <unavl> 00441cf1 00000017 00417004 00800024 00405d10
         fcsr      fir  restart
     00800000 00f30000 00000000
(gdb)

or (under certain circumstances):

(gdb) stepi
Register 0 is not available
(gdb)

This is specifically because `mips_linux_register_addr' and
`mips64_linux_register_addr', both correctly return -1 for
MIPS_ZERO_REGNUM, and therefore `linux_nat_trad_target::fetch_registers'
faithfully marks this register as unavailable.

Supply this register artificially then in the PTRACE_PEEKUSER case as
well, correcting this issue.

gdb/
* mips-linux-nat.c (mips_linux_nat_target::fetch_registers):
Supply the MIPS_ZERO_REGNUM register.

6 years agoMIPS: Make `mask_address_var' static
Maciej W. Rozycki [Tue, 15 May 2018 15:02:59 +0000 (16:02 +0100)]
MIPS: Make `mask_address_var' static

Make the `mask_address_var' variable static, it is not used outside
mips-tdep.c and having no target name embedded within it causes a risk
of a namespace clash.

gdb/
* mips-tdep.c (mask_address_var): Make variable static.

6 years agotestsuite: Fix a `server_pid' access crash in gdb.server/server-kill.exp
Maciej W. Rozycki [Tue, 15 May 2018 14:54:36 +0000 (15:54 +0100)]
testsuite: Fix a `server_pid' access crash in gdb.server/server-kill.exp

Fix a commit f90183d7e31b ("Get GDBserver pid on remote target") bug and
correctly handle the case where the PID of `gdbserver' could not have
been retrieved.  If that happens, $server_pid is unset causing:

FAIL: gdb.server/server-kill.exp: p server_pid
ERROR: tcl error sourcing .../gdb/testsuite/gdb.server/server-kill.exp.
ERROR: can't read "server_pid": no such variable
    while executing
"if {$server_pid == "" } {
    return -1
}"
    (file ".../gdb/testsuite/gdb.server/server-kill.exp" line 49)
    invoked from within
"source .../gdb/testsuite/gdb.server/server-kill.exp"
    ("uplevel" body line 1)
    invoked from within
"uplevel #0 source .../gdb/testsuite/gdb.server/server-kill.exp"
    invoked from within
"catch "uplevel #0 source $test_file_name""

Verify that the variable exists then rather than trying to access it.

gdb/testsuite/
* gdb.server/server-kill.exp: Verify whether `server_pid' exists
rather then trying to access it in determining whether the PID
of `gdbserver' could have been retrieved.

6 years agoFix uninitialised memory acccess in COFF bfd backend
Christophe Guillon [Tue, 15 May 2018 12:27:45 +0000 (12:27 +0000)]
Fix uninitialised memory acccess in COFF bfd backend

2018-05-15  Christophe Guillon  <christophe.guillon@st.com>

* coffcode.h (coff_bigobj_swap_aux_in): Make sure that all fields
of the aux structure are initialised.

Change-Id: I81be255ac6611afbe00995fac550e98e6a07e5df

6 years agoFix error messages in the NFP sources when building for 32-bit targets.
Francois H. Theron [Tue, 15 May 2018 12:28:06 +0000 (13:28 +0100)]
Fix error messages in the NFP sources when building for 32-bit targets.

bfd * targets.c: Wrap nfp_elf64_vec in BFD64 ifdef.

include * opcode/nfp.h: Use uint64_t instead of bfd_vma.

opcodes * nfp-dis.c: Use uint64_t for instruction variables, not bfd_vma.

6 years agoAdd a new Portuguese translation for the bfd sub-directory.
Nick Clifton [Tue, 15 May 2018 12:16:16 +0000 (13:16 +0100)]
Add a new Portuguese translation for the bfd sub-directory.

* po/pt.po: New Portuguese translation.
* configure.ac (ALL_LINGUAS): Add pt.
* configure: Regenerate.

6 years agoRestore LDFLAGS in notes.exp
Alan Modra [Tue, 15 May 2018 10:08:53 +0000 (19:38 +0930)]
Restore LDFLAGS in notes.exp

Fixes an spu-elf test regression due to using the wrong flags.

* testsuite/ld-elf/notes.exp: Restore LDFLAGS.

6 years agoRecognize more targets as ELF for testing
Alan Modra [Tue, 15 May 2018 06:30:57 +0000 (16:00 +0930)]
Recognize more targets as ELF for testing

Also use the correct rel strip-13 variant for more ARM targets.

* testsuite/lib/binutils-common.exp (is_elf_format): Add chorus,
cloudabi, fuchsia, kaos and nto.  Merge netbsdelf* into *elf*,
and *uclinux* into *linux*.
* testsuite/binutils-all/objcopy.exp: Accept armeb for rel
strip-13 test, exclude arm-vxworks and arm-windiss.

6 years agoAutomatic date update in version.in
GDB Administrator [Tue, 15 May 2018 00:00:27 +0000 (00:00 +0000)]
Automatic date update in version.in

6 years agoClear rust_unions in rust_union_quirks
Tom Tromey [Mon, 14 May 2018 15:34:00 +0000 (09:34 -0600)]
Clear rust_unions in rust_union_quirks

It turns out that a dwarf2_cu can remain allocated after psymtab
expansion is done, and so it makes sense to clear rust_unions when
done processing it.

Tested on x86-64 Fedora 27.

2018-05-14  Tom Tromey  <tom@tromey.com>

* dwarf2read.c (rust_union_quirks): Clear rust_unions.

6 years agoStop generating GNU build notes for linkonce sections.
Nick Clifton [Mon, 14 May 2018 14:32:43 +0000 (15:32 +0100)]
Stop generating GNU build notes for linkonce sections.

gas * write.c (maybe_generate_build_notes): Generate notes on a
per-code-section basis.  Skip linkonce sections.

ld * testsuite/ld-elf/notes.exp: New file: Run new test.
* testsuite/ld-elf/note1_1.s: New file: Source file for test.
* testsuite/ld-elf/note1_2.s: New file: Source file for test.
* testsuite/ld-elf/note1.r: New file: Expected readelf output.

6 years agoFix a problem in the assembler when checking for overlapping input and output files...
Nick Clifton [Mon, 14 May 2018 12:05:02 +0000 (13:05 +0100)]
Fix a problem in the assembler when checking for overlapping input and output files on non-POSIX compliant systems.

PR 23153
* as.c (main): When checking for an output file that is also an
input file, also check that the inode is not zero.

6 years agox86; Allow IFUNC pointer defined in PDE
H.J. Lu [Mon, 14 May 2018 10:55:37 +0000 (03:55 -0700)]
x86; Allow IFUNC pointer defined in PDE

If IFUNC symbol is defined in position-dependent executable, we should
change it to the normal function and set its address to its PLT entry
which should be resolved by R_*_IRELATIVE at run-time.  All external
references should be resolved to its PLT in executable.

bfd/

PR ld/23169
* elf-ifunc.c (_bfd_elf_allocate_ifunc_dyn_relocs): Don't issue
an error on IFUNC pointer defined in PDE.
* elf32-i386.c (elf_i386_finish_dynamic_symbol): Call
_bfd_x86_elf_link_fixup_ifunc_symbol.
* elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Likewise.
* elfxx-x86.c (_bfd_x86_elf_link_fixup_ifunc_symbol): New
function.
* elfxx-x86.h (_bfd_x86_elf_link_fixup_ifunc_symbol): New.

ld/

PR ld/23169
* testsuite/ld-ifunc/ifunc-9-i386.d: New file.
* testsuite/ld-ifunc/ifunc-9-x86-64.d: Likewise.
* testsuite/ld-ifunc/pr23169a.c: Likewise.
* testsuite/ld-ifunc/pr23169a.rd: Likewise.
* testsuite/ld-ifunc/pr23169b.c: Likewise.
* testsuite/ld-ifunc/pr23169b.c: Likewise.
* testsuite/ld-ifunc/pr23169c.rd: Likewise.
* testsuite/ld-ifunc/pr23169c.rd: Likewise.
* testsuite/ld-ifunc/ifunc-9-x86.d: Removed.
* testsuite/ld-ifunc/ifunc.exp: Run PR ld/23169 tests.

6 years agox86: Mark __bss_start, _end and _edata locally defined
H.J. Lu [Mon, 14 May 2018 10:47:47 +0000 (03:47 -0700)]
x86: Mark __bss_start, _end and _edata locally defined

__bss_start, _end and _edata are defined by linker to mark regions
within executables and shared libraries.  All references within
executables should be locally resolved.

This patch doesn't change how their references within shared libraries
are resolved.

bfd/

PR ld/23162
* elfxx-x86.c (elf_x86_linker_defined): New function.
(_bfd_x86_elf_link_check_relocs): Use it to mark __bss_start,
_end and _edata locally defined within executables.

ld/

PR ld/23162
* testsuite/ld-elf/pr23162.map: New file.
* testsuite/ld-elf/pr23162.rd: Likewise.
* testsuite/ld-elf/pr23162a.c: Likewise.
* testsuite/ld-elf/pr23162b.c: Likewise.
* testsuite/ld-elf/shared.exp: Run PR ld/23162 tests.

6 years agoAutomatic date update in version.in
GDB Administrator [Mon, 14 May 2018 00:00:25 +0000 (00:00 +0000)]
Automatic date update in version.in

6 years agoAutomatic date update in version.in
GDB Administrator [Sun, 13 May 2018 00:01:08 +0000 (00:01 +0000)]
Automatic date update in version.in

6 years agoscore gcc-8 warning fixes
Alan Modra [Sat, 12 May 2018 06:51:22 +0000 (16:21 +0930)]
score gcc-8 warning fixes

Rather than just silencing the gcc-8 warnings, I decided to rewrite
the buffer handling in the two functions where gcc was warning.
The rest of the file could do with the same treatment.

* config/tc-score.c (s3_do_macro_bcmp): Don't use fixed size
buffers.
(s3_do_macro_bcmpz): Likewise.

6 years agoPR20659, Objcopy and change section lma failing
Alan Modra [Fri, 11 May 2018 05:04:48 +0000 (14:34 +0930)]
PR20659, Objcopy and change section lma failing

Sections may well belong in multiple segments.  The testcase in the PR
saw an allocated section being assigned to an ABIFLAGS segment, then
not being assigned to a LOAD segment because it had already been
handled.  To fix that particular problem this patch sets and tests
segment_mark only for LOAD segments.  I kept the segment_mark test for
LOAD segments because I think there may otherwise be a problem with
zero size sections.

A few other problems showed up with the testcase.  Some targets align
.dynamic, resulting in the test failing with "section .dynamic lma
0x800000c0 adjusted to 0x800000cc" and similar messages.  I've tried
to handle that with some more hacks to the segment lma, which do the
right thing for the testcase, but may well fail in other situations.

I've also removed the tests of segment lma (p_paddr) and code involved
in deciding that an adjusted segment no longer covers the file or
program headers.  Those test can't be correct in the face of objcopy
--change-section-lma.  It may be necessary to reinstate the tests but
do them modulo page size, but we'll see how this goes.

PR 20659
bfd/
* elf.c (rewrite_elf_program_header): Use segment_mark only for
PT_LOAD headers.  Delete first_matching_lma and first_suggested_lma.
Instead make matching_lma and suggested_lma pointers to the
sections.  Align section vma and lma calculated from segment.
Don't clear includes_phdrs or includes_filehdr based on p_paddr
test.  Try to handle alignment padding before first section by
adjusting new segment lma down.  Adjust PT_PHDR map p_paddr.
ld/
* testsuite/ld-elf/changelma.d,
* testsuite/ld-elf/changelma.lnk,
* testsuite/ld-elf/changelma.s: New test.

6 years agoAutomatic date update in version.in
GDB Administrator [Sat, 12 May 2018 00:00:35 +0000 (00:00 +0000)]
Automatic date update in version.in

6 years agogdb/x86: Fix write out of mxcsr register for xsave targets
Andrew Burgess [Thu, 10 May 2018 23:45:55 +0000 (00:45 +0100)]
gdb/x86: Fix write out of mxcsr register for xsave targets

In commit:

  commit 8ee22052f690c007556b97eed59f49350ece5ca9
  Author: Andrew Burgess <andrew.burgess@embecosm.com>
  Date:   Thu May 3 17:46:14 2018 +0100

      gdb/x86: Handle kernels using compact xsave format

in two places FXSAVE_ADDR was used instead of FXSAVE_MXCSR_ADDR to get
the address of the mxcsr register within the xsave buffer.  This will
mean we are potentially accessing the wrong location within the xsave
buffer.

There are no tests included with this patch.  The first mistake would
only trigger an issue if/when the user tries to manually set the mxcsr
register to a value that matches the random (value off stack) value
that is in the xsave buffer, in this case the change by the user will
go unnoticed by GDB, and the default value of mxcsr will be preserved.

The second mistake only happens on the code path where all x87
registers are being written out of the register cache.  I'm not sure
how to trigger that code path.

gdb/ChangeLog:

* i387-tdep.c (i387_collect_xsave): Use FXSAVE_MXCSR_ADDR not
FXSAVE_ADDR for the mxcsr register.

6 years agogdb: xtensa: drop gdb_target definition
Max Filippov [Wed, 25 Apr 2018 18:23:38 +0000 (11:23 -0700)]
gdb: xtensa: drop gdb_target definition

gdb_target definitions were removed from configure.tgt in 2007, before
xtensa port was merged. Remove it from the xtensa target as well.

gdb/
2018-05-11  Max Filippov  <jcmvbkbc@gmail.com>

* configure.tgt (xtensa*-*-linux*): Drop gdb_target definition.

6 years agoFix email address in ChangeLog entry
Pedro Alves [Fri, 11 May 2018 18:18:02 +0000 (19:18 +0100)]
Fix email address in ChangeLog entry

tromey@redhat.com -> palves@redhat.com

6 years agoHeap-allocate core_target instances
Pedro Alves [Fri, 11 May 2018 18:10:14 +0000 (19:10 +0100)]
Heap-allocate core_target instances

This gets rid of the core_ops global, and replaces it with
heap-allocated core_target instances.  In practice, there will only be
one such instance, though that will change further ahead as more
pieces of multi-target support are merged.

Notice that this replaces one heap-allocated object for another, the
number of allocations is the same.  Specifically, currently we
heap-allocate the 'core_data' object, which holds the core's section
table.  With this patch, that object is made a field of the
core_target class, and no longer allocated separately.

Note that this bit:

  -  /* Looks semi-reasonable.  Toss the old core file and work on the
  -     new.  */
  -
  -  unpush_target (&core_ops);

does not need a replacement, because by the time we get here, the
target_preopen call at the top of core_target_open has already
unpushed any previous target.

gdb/ChangeLog:
2018-05-11  Pedro Alves  <palves@redhat.com>

* corelow.c (core_target) <core_target>: No longer inline.
Initialize m_core_gdbarch, m_core_vec and build the section table
here.
<~core_target>: New.
<core_gdbarch, get_core_register_section>: New methods.
<m_core_section_table, m_core_vec, m_core_gdbarch>: New fields,
factored out from ...
<core_data, core_vec, core_gdbarch>: ... these deleted globals.
(core_ops): Delete.
(sniff_core_bfd): Add gdbarch parameter.
(core_close): Delete, merged into ...
(core_target::close): ... here.  Delete self.
(core_close_cleanup): Delete.
(core_target_open): Allocate a core_target on the heap.  Use a
unique_ptr instead of a cleanup.  Bits moved into the core_target
ctor.  Adjust to use core_target methods instead of globals.
(get_core_register_section): Rename to ...
(core_target::get_core_register_section): ... this and adjust.
(struct get_core_registers_cb_data): New.
(get_core_registers_cb): Use it.  Use bool.
(core_target::fetch_registers, core_target::files_info)
(core_target::xfer_partial, core_target::read_description)
(core_target::pid_to, core_target::thread_name): Adjust to
reference class fields instead of globals.
* target.h (struct target_ops_deleter, target_ops_up): New.

6 years agoEliminate the 'the_core_target' global
Pedro Alves [Fri, 11 May 2018 18:10:14 +0000 (19:10 +0100)]
Eliminate the 'the_core_target' global

(previously called 'core_target', but since renamed because
'core_target' is the name of the target_ops class now.)

This eliminates the "the_core_target" global, as preparation for being
able to have more than one core loaded.  When we get there, we will
instantiate one core_target object per core instead.

Essentially, this replaces the reference to the_core_target in
core_file_command by a reference to core_bfd, which is per
program_space.

Currently, core_file_command calls 'the_core_target->detach()' even if
the core target is not open and pushed on the target stack.  If it is
indeed not open, then the practical effect is that
core_target::detach() prints "No core file now.".  That is preserved
by printing that directly from within core_file_command if not
debugging a core.

gdb/ChangeLog:
2018-05-11  Pedro Alves  <palves@redhat.com>

* corefile.c (core_file_command): Move to corelow.c.
* corelow.c (the_core_target): Delete.
(core_file_command): Moved from corefile.c.  Check exec_bfd
instead of the_core_target.  Use target_detach instead of calling
into the_core_target directly.
(maybe_say_no_core_file_now): New.
(core_target::detach): Use it.
(_initialize_corelow): Remove references to the_core_target.
* gdbcore.h (the_core_target): Delete.

6 years agoMove core_bfd to program space
Tom Tromey [Fri, 11 May 2018 18:10:13 +0000 (19:10 +0100)]
Move core_bfd to program space

This moves the core_bfd global to be a field of the program space.  It
then replaces core_bfd with a macro to avoid a massive patch -- the
same approach taken for various other program space fields.

This is a basic transformation for multi-target work.

2018-05-11  Tom Tromey  <tromey@redhat.com>
    Pedro Alves  <tromey@redhat.com>

* corefile.c (core_bfd): Remove.
* gdbcore.h (core_bfd): Now a macro.
* progspace.h (struct program_space) <cbfd>: New field.

6 years agoRemove cleanups from mdebugread.c
Tom Tromey [Wed, 9 May 2018 21:42:28 +0000 (15:42 -0600)]
Remove cleanups from mdebugread.c

This removes the remaining cleanups from mdebugread.c, replacing them
with gdb::def_vector.

Tested by the buildbot, though I doubt this exercises mdebugread.

gdb/ChangeLog
2018-05-11  Tom Tromey  <tom@tromey.com>

* mdebugread.c (parse_partial_symbols, psymtab_to_symtab_1): Use
gdb::def_vector.

6 years agoAutomatic date update in version.in
GDB Administrator [Fri, 11 May 2018 00:00:38 +0000 (00:00 +0000)]
Automatic date update in version.in

6 years agox86 LynxOS-178: Adjust floating-point context structure
Joel Brobecker [Thu, 10 May 2018 17:01:39 +0000 (12:01 -0500)]
x86 LynxOS-178: Adjust floating-point context structure

The floating point context structure on x86 LynxOS-178 is not
the same as on LynxOS 5.x. As a consequence, trying to print
the return value of a function returning a float, for instance,
yields incorrect results.

This patch fixes the issue by providing an updated definition
for LynxOS-178 (the reason why we cannot access the actual definition
provided by the system still remains true).

gdb/gdbserver/ChangeLog:

        * lynx-i386-low.c (LYNXOS_178): New macro.
        [LYNXOS_178] (usr_fcontext_t): Provide a definition that matches
        the layout on LynxOS-178.
        (lynx_i386_fill_fpregset, lynx_i386_store_fpregset): Do not
        handle floating point registers that are not supported by
        LynxOS-178.

6 years agoFix the clang build
Tom Tromey [Thu, 10 May 2018 14:38:51 +0000 (08:38 -0600)]
Fix the clang build

Simon pointed out that gdb would not build with clang, due to the
addition of -Wimplicit-fallthrough.  This patch fixes the problem by
using -Wimplicit-fallthrough=3 -- this does not work with clang,
bypassing the issue.

Tested by rebuilding with both gcc and clang; and also by verifying
that -Wimplicit-fallthrough=3 is used in the gcc build.

I will file a follow-up bug to convert the fall-through comments to a
form that can be used by both clang and gcc.

gdb/ChangeLog
2018-05-10  Tom Tromey  <tom@tromey.com>

* configure: Rebuild.
* warning.m4 (AM_GDB_WARNINGS): Use -Wimplicit-fallthrough=3.

gdb/gdbserver/ChangeLog
2018-05-10  Tom Tromey  <tom@tromey.com>

* configure: Rebuild.

6 years agoAllow integer immediates for AArch64 fmov instructions.
Tamar Christina [Thu, 10 May 2018 15:24:58 +0000 (16:24 +0100)]
Allow integer immediates for AArch64 fmov instructions.

This patch makes it possible to use an integer immediate with the fmov instructions
allowing you to simply write fmov d0, #2 instead of needing fmov d0, #2.0.

The parse double function already know to deal with this so we just need to list the
restriction put in place in parser.

The is considered a QoL improvement for hand assembly writers and allows more
code portability between assembler.

gas/

* config/tc-aarch64.c (parse_aarch64_imm_float): Remove restrictions.
* testsuite/gas/aarch64/diagnostic.s: Move fmov int test to..
* testsuite/gas/aarch64/fpmov.s: Here.
* testsuite/gas/aarch64/fpmov.d: Update results with fmov.
* testsuite/gas/aarch64/diagnostic.l: Remove fmov values.
* testsuite/gas/aarch64/sve-invalid.s: Update test files.
* testsuite/gas/aarch64/sve-invalid.l: Likewise

6 years agoAllow integer immediate for VFP vmov instructions.
Tamar Christina [Thu, 10 May 2018 15:22:32 +0000 (16:22 +0100)]
Allow integer immediate for VFP vmov instructions.

This patch fixes the case where you want to use an integer value the
floating point immediate to a VFP vmov instruction such as
vmovmi.f32 s27, #11.

If the immediate is not a float we convert it and copy it's representation
into the imm field and then carry on validating as if we originally entered
a floating point immediate.

The is considered a QoL improvement for hand assembly writers and allows more
code portability between assembler.

gas/
* gas/config/tc-arm.c (do_neon_mov): Allow integer literal for float
immediate.
* testsuite/gas/arm/vfp-mov-enc.s: New.
* testsuite/gas/arm/vfp-mov-enc.d: New.

6 years agogdbserver/Windows: crash during connection establishment phase
Joel Brobecker [Thu, 10 May 2018 15:27:13 +0000 (10:27 -0500)]
gdbserver/Windows: crash during connection establishment phase

On Windows, starting a new process with GDBserver seems to work,
in the sense that the program does get started, and GDBserver
confirms that it is listening for GDB to connect. However, as soon as
GDB establishes the connection with GDBserver, and starts discussing
with it, GDBserver crashes, with a SEGV.

This SEGV occurs in remote-utils.c::prepare_resume_reply...

  | regp = current_target_desc ()->expedite_regs;
  | [...]
  | while (*regp)

... because, in our case, REGP is NULL.

This patches fixes the issues by adding a parameter to init_target_desc,
in order to make sure that we always provide the list of registers when
we initialize a target description.

gdb/ChangeLog:

        PR server/23158:
        * regformats/regdat.sh: Adjust script, following the addition
        of the new expedite_regs parameter to init_target_desc.

gdb/gdbserver/ChangeLog:

        PR server/23158:
        * tdesc.h (init_target_desc) <expedite_regs>: New parameter.
        * tdesc.c (init_target_desc) <expedite_regs>: New parameter.
        Use it to set the expedite_regs field in the given tdesc.
        * x86-tdesc.h: New file.
        * linux-aarch64-tdesc.c (aarch64_linux_read_description):
        Adjust following the addition of the new expedite_regs parameter
        to init_target_desc.
        * linux-tic6x-low.c (tic6x_read_description): Likewise.
        * linux-x86-tdesc.c: #include "x86-tdesc.h".
        (i386_linux_read_description, amd64_linux_read_description):
        Adjust following the addition of the new expedite_regs parameter
        to init_target_desc.
        * lynx-i386-low.c: #include "x86-tdesc.h".
        (lynx_i386_arch_setup): Adjust following the addition of the new
        expedite_regs parameter to init_target_desc.
        * nto-x86-low.c: #include "x86-tdesc.h".
        (nto_x86_arch_setup): Adjust following the addition of the new
        expedite_regs parameter to init_target_desc.
        * win32-i386-low.c: #include "x86-tdesc.h".
        (i386_arch_setup): Adjust following the addition of the new
        expedite_regs parameter to init_target_desc.

6 years agogdbserver/Windows: Fix "no program to debug" error
Joel Brobecker [Thu, 10 May 2018 15:24:33 +0000 (10:24 -0500)]
gdbserver/Windows: Fix "no program to debug" error

Trying to start a program with GDBserver on Windows yields
the following error:

    $ gdbserver.exe --once :4444 simple_main.exe
    Killing process(es): 5008
    No program to debug
    Exiting

The error itself comes from the following code shortly after
create_inferior gets called (in server.c::main):

    /* Wait till we are at first instruction in program.  */
    create_inferior (program_path.get (), program_args);
    [...]

    if (last_status.kind == TARGET_WAITKIND_EXITED
        || last_status.kind == TARGET_WAITKIND_SIGNALLED)
      was_running = 0;
    else
      was_running = 1;

    if (!was_running && !multi_mode)
      error ("No program to debug");

What happens is that the "last_status" global starts initialized
as zeroes, which means last_status.kind == TARGET_WAITKIND_EXITED,
and we expect create_inferior to be waiting for the inferior to
start until reaching the SIGTRAP, and to set the "last_status"
global to match that last event we received.

I suspect this is an unintended side-effect of the following change...

    commit 2090129c36c7e582943b7d300968d19b46160d84
    Date:   Thu Dec 22 21:11:11 2016 -0500
    Subject: Share fork_inferior et al with gdbserver

... which removes some code in server.c that was responsible for
starting the inferior in a functin that was named start_inferior,
and looked like this:

   signal_pid = create_inferior (new_argv[0], &new_argv[0]);
   [...]
   /* Wait till we are at 1st instruction in program, return new pid
      (assuming success).  */
   last_ptid = mywait (pid_to_ptid (signal_pid), &last_status, 0, 0);

The code has been transitioned to using fork_inferior, but sadly,
only for the targets that support it. On Windows, the calls to wait
setting "last_status" simply disappeared.

This patch adds it back in the Windows-specific implementation of
create_inferior.

gdb/gdbserver/ChangeLog:

        PR server/23158:
        * win32-low.c (win32_create_inferior): Add call to my_wait
        setting last_status global.

6 years ago[gdbserver/win32] fatal "glob could not process pattern '(null)'" error
Joel Brobecker [Thu, 10 May 2018 15:23:10 +0000 (10:23 -0500)]
[gdbserver/win32] fatal "glob could not process pattern '(null)'" error

Trying to start GDBserver on Windows currently yields the following
error...

    $ gdbserver.exe --once :4444 simple_main.exe
    glob could not process pattern '(null)'.
    Exiting

... after which GDB terminates with a nonzero status.

This is because create_process in win32-low.c calls gdb_tilde_expand
with the result of a call to get_inferior_cwd without verifying that
the returned directory is not NULL:

    | static BOOL
    | create_process (const char *program, char *args,
    |                 DWORD flags, PROCESS_INFORMATION *pi)
    | {
    |   const char *inferior_cwd = get_inferior_cwd ();
    |   std::string expanded_infcwd = gdb_tilde_expand (inferior_cwd);

This patch avoids this by only calling gdb_tilde_expand when
INFERIOR_CWD is not NULL, which is similar to what is done on
GNU/Linux for instance.

gdb/gdbserver/ChangeLog:

        PR server/23158:
        * win32-low.c (create_process): Only call gdb_tilde_expand if
        inferior_cwd is not NULL.

6 years agoAdd support for detecting Freescale S12Z binaries in readelf.
John Darrington [Thu, 10 May 2018 11:51:42 +0000 (12:51 +0100)]
Add support for detecting Freescale S12Z binaries in readelf.

* include/elf/common.h (EM_S12Z): New macro
* binutils/readelf.c (get_machine_name): EM_S12Z - handle new case.

6 years agoFix tagged pointer support
Omair Javaid [Tue, 1 May 2018 01:31:32 +0000 (06:31 +0500)]
Fix tagged pointer support

This patch fixes tagged pointer support for AArch64 GDB. Linux kernel
debugging failure was reported after tagged pointer support was committed.

After a discussion around best path forward to manage tagged pointers
on GDB side we are going to disable tagged pointers support for
aarch64-none-elf-gdb because for non-linux applications we cant be
sure if tagged pointers will be used by MMU or not.

Also for aarch64-linux-gdb we are going to sign extend user-space
address after clearing tag bits. This will help debug both kernel
and user-space addresses based on information from linux kernel
documentation given below:

According to AArch64 memory map:
https://www.kernel.org/doc/Documentation/arm64/memory.txt

"User addresses have bits 63:48 set to 0 while the kernel addresses have
the same bits set to 1."

According to AArch64 tagged pointers document:
https://www.kernel.org/doc/Documentation/arm64/tagged-pointers.txt

The kernel configures the translation tables so that translations made
via TTBR0 (i.e. userspace mappings) have the top byte (bits 63:56) of
the virtual address ignored by the translation hardware. This frees up
this byte for application use.

Running gdb testsuite after applying this patch introduces no regressions
and tagged pointer test cases still pass.

gdb/ChangeLog:
2018-05-10  Omair Javaid  <omair.javaid@linaro.org>

PR gdb/23127
* aarch64-linux-tdep.c (aarch64_linux_init_abi): Add call to
set_gdbarch_significant_addr_bit.
* aarch64-tdep.c (aarch64_gdbarch_init): Remove call to
set_gdbarch_significant_addr_bit.
* utils.c (address_significant): Update to sign extend addr.

6 years agoFix _GLOBAL_OFFSET_TABLE_ value for large GOTs (aarch64).
Stephen Crane [Thu, 10 May 2018 07:09:32 +0000 (00:09 -0700)]
Fix _GLOBAL_OFFSET_TABLE_ value for large GOTs (aarch64).

Gold resolves GOT-relative relocs relative to the GOT base +
0x8000 when the GOT is larger than 0x8000. However, previously
the _GLOBAL_OFFSET_TABLE_ symbol was set to GOT base + 0x8000
when the .got.plt was larger than 0x8000. This patch makes both
checks use the size of the .got section so that they agree when
to add 0x8000.

6 years agoAutomatic date update in version.in
GDB Administrator [Thu, 10 May 2018 00:00:38 +0000 (00:00 +0000)]
Automatic date update in version.in

6 years agogas: xtensa: fix literal movement
Max Filippov [Tue, 8 May 2018 20:49:00 +0000 (13:49 -0700)]
gas: xtensa: fix literal movement

Not all literals need to be moved in the presence of
--text-section-literals or --auto-litpools, but only those created by
.literal pseudo op or generated as a result of relaxation. Attempts to
move other literals may result in abnormal termination of the assembler
due to the following assertion failure:

  Internal error in xg_find_litpool at gas/config/tc-xtensa.c:11209.

The same assertion may also be triggered by attempting to assign literal
pools to literals in .init and .fini sections; don't try to do that.

gas/
2018-05-09  Max Filippov  <jcmvbkbc@gmail.com>

* config/tc-xtensa.c (xtensa_is_init_fini): New function.
(xtensa_move_literals): Only attempt to assign literal pool to
literals with tc_frag_data.is_literal mark and not in .init or
.fini sections.
Join nested 'if' conditions to simplify function structure.
(xtensa_switch_to_non_abs_literal_fragment): Use
xtensa_is_init_fini to test for .init/.fini sections.
* testsuite/gas/xtensa/all.exp (auto-litpools-3)
(auto-litpools-4, text-section-literals-1): New tests.
* testsuite/gas/xtensa/auto-litpools-3.d: New test results.
* testsuite/gas/xtensa/auto-litpools-3.s: New test source.
* testsuite/gas/xtensa/auto-litpools-4.d: New test results.
* testsuite/gas/xtensa/auto-litpools-4.s: New test source.
* testsuite/gas/xtensa/text-section-literals-1.d: New test results.
* testsuite/gas/xtensa/text-section-literals-1.s: New test source.

6 years agox86: Remove Disp<N> from movidir{i,64b}
H.J. Lu [Wed, 9 May 2018 18:17:26 +0000 (11:17 -0700)]
x86: Remove Disp<N> from movidir{i,64b}

* i386-opc.tbl: Remove Disp<N> from movidir{i,64b}.

6 years agogdb: xtensa: handle privileged registers
Max Filippov [Wed, 25 Apr 2018 18:55:56 +0000 (11:55 -0700)]
gdb: xtensa: handle privileged registers

xtensa GDB may be used with both bare-metal and linux-based
applications. In case of bare-metal application gdbserver is able to
provide information about all CPU registers: both unprivileged and
privileged. In case of linux-based application only a small subset of
privileged state is available. Currently xtensa GDB only expects
unprivileged registers in 'g' packets and it fails to communicate with
server that sends both privileged and unprivileged registers.

Allow bare-metal xtensa GDB to deal with both privileged and
unprivileged registers by initializing tdep->num_regs with the total
number of target CPU registers. Keep linux-based xtensa GDB
functionality as is by copying tdep->num_nopriv_regs to tdep->num_regs.

gdb/
2018-05-09  Max Filippov  <jcmvbkbc@gmail.com>

* xtensa-linux-tdep.c (xtensa-tdep.h): New include.
(xtensa_linux_init_abi): Limit tdep->num_regs by
tdep->num_nopriv_regs.
* xtensa-tdep.c (xtensa_derive_tdep): Calculate
tdep->num_nopriv_regs and only copy it to tdep->num_regs if it's
not initialized.

6 years agoFix typo in od-macho.c
Alan Modra [Wed, 9 May 2018 11:05:43 +0000 (20:35 +0930)]
Fix typo in od-macho.c

PR 22069
* od-macho.c (dump_unwind_encoding_x86): Fix typo in last patch.

6 years agoFix binary compatibility between GCC and the TI compiler for the PRU target.
Dimitar Dimitrov [Wed, 9 May 2018 10:39:32 +0000 (11:39 +0100)]
Fix binary compatibility between GCC and the TI compiler for the PRU target.

My original implementation for LDI32 pseudo does not conform to
the TI ABI.  I wrongly documented my TI PRU ELF object files inspection,
which got propagated into my binutils implementation.

Issue was exposed when running the GCC ABI testsuite against TI toolchain.
According to TI ABI, LDI32 must use first LDI instruction to load
the MSB 16bits, and second LDI instruction for the LSB 16bits.

This patch will break binary compatibility with previously released
binutils versions for PRU. Still, I think it is better to fix
binutils to conform to the chip vendor ABI.

bfd * elf32-pru.c (pru_elf32_do_ldi32_relocate): Make LDI32 relocation
conformant to TI ABI.
(pru_elf32_relax_section): Likewise.
(pru_elf_relax_delete_bytes): Fix offsets for new LDI32 code.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): Ignore addend.
(pru_elf32_pmem_relocate): Trap - should not get here.
(pru_elf32_relocate_section): Add support for REL relocations.
(elf_info_to_howto_rel): Enable REL.
(elf_backend_may_use_rel_p): Likewise.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.

gas * config/tc-pru.c (md_apply_fix): Make LDI32 relocation conformant
to TI ABI.
(pru_assemble_arg_i): Likewise.
(output_insn_ldi32): Likewise.
* testsuite/gas/pru/ldi.d: Update test for the now fixed LDI32.
* gas/config/tc-pru.c (pru_assemble_arg_b): Check imm8 operand range.
* gas/testsuite/gas/pru/illegal2.l: New test.
* gas/testsuite/gas/pru/illegal2.s: New test.
* gas/testsuite/gas/pru/pru.exp: Register new illegal2 test.

ld * scripttempl/pru.sc: Add LD sections to allow linking TI
toolchain object files.
* scripttempl/pru.sc: Switch to init_array.
* testsuite/ld-pru/ldi32.d: Update LDI32 test to conform to TI ABI.
* testsuite/ld-pru/norelax_ldi32-data.d: Likewise.
* testsuite/ld-pru/norelax_ldi32-dis.d: Likewise.
* testsuite/ld-pru/relax_ldi32-data.d: Likewise.
* testsuite/ld-pru/relax_ldi32-dis.d: Likewise.

6 years agoPR22069, Several instances of register accidentally spelled as regsiter
Alan Modra [Wed, 9 May 2018 06:20:29 +0000 (15:50 +0930)]
PR22069, Several instances of register accidentally spelled as regsiter

PR 22069
binutils/
* od-macho.c (dump_unwind_encoding_x86): Adjust for macro renaming.
cpu/ChangeLog
* or1kcommon.cpu (spr-reg-info): Typo fix.
include/ChangeLog
* mach-o/unwind.h (MACH_O_UNWIND_X86_64_RBP_FRAME_REGISTERS):
Rename from MACH_O_UNWIND_X86_64_RBP_FRAME_REGSITERS.
(MACH_O_UNWIND_X86_EBP_FRAME_REGISTERS): Rename from
MACH_O_UNWIND_X86_EBP_FRAME_REGSITERS.
opcodes/ChangeLog
* cr16-opc.c (cr16_instruction): Comment typo fix.
* hppa-dis.c (print_insn_hppa): Likewise.
sim/ppc/ChangeLog
* e500_registers.h: Comment typo fix.
* ppc-instructions (ppc_insn_mfcr): Likewise.

6 years agoRegen ld potfile
Alan Modra [Wed, 9 May 2018 05:48:29 +0000 (15:18 +0930)]
Regen ld potfile

* po/BLD-POTFILES.in: Regenerate.

6 years agoPR23148, Heap buffer overflow in pe_print_edata
Alan Modra [Wed, 9 May 2018 04:38:09 +0000 (14:08 +0930)]
PR23148, Heap buffer overflow in pe_print_edata

PR 23148
* peXXigen.c (pe_print_edata): Correct minimum size.

6 years agoPR23147, Heap buffer overflow in pe_print_idata
Alan Modra [Wed, 9 May 2018 04:26:34 +0000 (13:56 +0930)]
PR23147, Heap buffer overflow in pe_print_idata

PR 23147
* peXXigen.c (pe_print_idata): Bound check hint_addr.

6 years agoAutomatic date update in version.in
GDB Administrator [Wed, 9 May 2018 00:00:31 +0000 (00:00 +0000)]
Automatic date update in version.in

6 years agoRISC-V: Add missing hint instructions from RV128I.
Jim Wilson [Tue, 8 May 2018 22:46:19 +0000 (15:46 -0700)]
RISC-V: Add missing hint instructions from RV128I.

gas/
* testsuite/gas/riscv/c-zero-imm.d: Add more tests.
* testsuite/gas/riscv/c-zero-imm.s: Likewise.
* testsuite/gas/riscv/c-zero-reg.d: Fix typo in test.  Add disabled
future test for RV128 support.
* testsuite/gas/riscv/c-zero-reg.s: Likewise.

include/
* opcode/riscv-opc.h (MATCH_C_SRLI64, MASK_C_SRLI64): New.
(MATCH_C_SRAI64, MASK_C_SRAI64): New.
(MATCH_C_SLLI64, MASK_C_SLLI64): New.

opcodes/
* riscv-opc.c (match_c_slli, match_slli_as_c_slli): New.
(match_c_slli64, match_srxi_as_c_srxi): New.
(riscv_opcodes) <slli, sll>: Use match_slli_as_c_slli.
<srli, srl, srai, sra>: Use match_srxi_as_c_srxi.
<c.slli, c.srli, c.srai>: Use match_s_slli.
<c.slli64, c.srli64, c.srai64>: New.

6 years agoDefine GNULIB_NAMESPACE in unittests/string_view-selftests.c
Simon Marchi [Tue, 8 May 2018 20:45:02 +0000 (16:45 -0400)]
Define GNULIB_NAMESPACE in unittests/string_view-selftests.c

When building with x86_64-w64-mingw32-g++ (to test cross-compiling for
Windows), I get this error:

unittests/string_view-selftests.o: In function `selftests::string_view::inserters_2::test05(unsigned long long)':
/home/emaisin/src/binutils-gdb/gdb/unittests/basic_string_view/inserters/char/2.cc:60: undefined reference to `std::basic_ofstream<char, std::char_traits<char> >::rpl_close()'

This is caused by gnulib redefining "close" as "rpl_close", and
therefore messing up the declaration of basic_ofstream in the libstdc++
header.  The solution would be to use gnulib namespaces [1].  Until we
use them across GDB, we can use them locally in files that are
problematic, like this one.

gdb/ChangeLog:

* unittests/string_view-selftests.c: Define GNULIB_NAMESPACE.

6 years agoRISC-V: New emulations to make path searches follow glibc ABI.
Jim Wilson [Tue, 8 May 2018 20:34:03 +0000 (13:34 -0700)]
RISC-V: New emulations to make path searches follow glibc ABI.

ld/
PR ld/22962
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32lriscv_ilp32f.c,
eelf32lriscv_ilp32.c, eelf64lriscv_lp64f.c, eelf64lriscv_lp64.c.
(eelf32lriscv_ilp32f.c, eelf32lriscv_ilp32.c): New build rules.
(eelf64lriscv_lp64f.c, eelf64lriscv_lp64.c): New build rules.
* Makefile.in: Regenerated.
* configure.tgt (riscv32*-*-linux*, riscv64*-*-linux*): New.
* ld/emulparams/elf32lriscv.sh: Set LIBPATH_SUFFIX.
* ld/emulparams/elf32lriscv_ilp32.sh: New.
* ld/emulparams/elf32lriscv_ilp32f.sh: New.
* ld/emulparams/elf64lriscv-defs.sh: Don't set LIBPATH_SUFFIX here.
* ld/emulparams/elf64lriscv.sh: Set LIBPATH_SUFFIX.
* ld/emulparams/elf64lriscv_lp64.sh: New.
* ld/emulparams/elf64lriscv_lp64f.sh: New.
* ld/genscripts.sh (append_to_lib_path): Change LIBPATH_SUFFIX test to
a for.  Inside loop, change LIBPATH_SUFFIX uses to libpath_suffix.
(LIB_PATH): In LIB_PATH if, add loop for LIBPATH_SUFFIX, changes uses
inside loop to libpath_suffix.

6 years agogdb/x86: Handle kernels using compact xsave format
Andrew Burgess [Thu, 3 May 2018 16:46:14 +0000 (17:46 +0100)]
gdb/x86: Handle kernels using compact xsave format

For GNU/Linux on x86-64, if the target is using the xsave format for
passing the floating-point information from the inferior then there
currently exists a bug relating to the x87 control registers, and the
mxcsr register.

The xsave format allows different floating-point features to be lazily
enabled, a bit in the xsave format tells GDB which floating-point
features have been enabled, and which have not.

Currently in GDB, when reading the floating point state, we check the
xsave bit flags, if the feature is enabled then we read the feature
from the xsave buffer, and if the feature is not enabled, then we
supply the default value from within GDB.

Within GDB, when writing the floating point state, we first fetch the
xsave state from the target and then, for any feature that is not yet
enabled, we write the default values into the xsave buffer.  Next we
compare the regcache value with the value in the xsave buffer, and, if
the value has changed we update the value in the xsave buffer, and
mark the feature enabled in the xsave bit flags.

The problem then, is that the x87 control registers were not following
this pattern.  We assumed that these registers were always written out
by the kernel, and we always wrote them out to the xsave buffer (but
didn't enabled the feature).  The result of this is that if the kernel
had not yet enabled the x87 feature then within GDB we would see
random values for the x87 floating point control registers, and if the
user tried to modify one of these register, that modification would be
lost.

Finally, the mxcsr register was also broken in the same way as the x87
control registers.  The added complexity with this case is that the
mxcsr register is part of both the avx and sse floating point feature
set.  When reading or writing this register we need to check that at
least one of these features is enabled.

This bug was present in native GDB, and within gdbserver.  Both are
fixed with this commit.

gdb/ChangeLog:

* common/x86-xstate.h (I387_FCTRL_INIT_VAL): New constant.
(I387_MXCSR_INIT_VAL): New constant.
* amd64-tdep.c (amd64_supply_xsave): Only read state from xsave
buffer if it was supplied by the inferior.
* i387-tdep.c (i387_supply_fsave): Use I387_MXCSR_INIT_VAL.
(i387_xsave_get_clear_bv): New function.
(i387_supply_xsave): Only read x87 control registers from the
xsave buffer if the feature is enabled, and the state will have
been written, otherwise, provide a suitable default.
(i387_collect_xsave): Pre-clear all registers in xsave buffer,
including x87 control registers.  Update control registers if they
have changed from the default value, and mark features as enabled
as required.
* i387-tdep.h (i387_xsave_get_clear_bv): Declare.

gdb/gdbserver/ChangeLog:

* i387-fp.c (i387_cache_to_xsave): Only write x87 control
registers to the cache if their values have changed.
(i387_xsave_to_cache): Provide default values for x87 control
registers when these features are available, but disabled.
* regcache.c (supply_register_by_name_zeroed): New function.
* regcache.h (supply_register_by_name_zeroed): Declare new
function.

gdb/testsuite/ChangeLog:

* gdb.arch/amd64-init-x87-values.S: New file.
* gdb.arch/amd64-init-x87-values.exp: New file.

6 years agoPR23141, SIGSEGV in bfd_elf_set_group_contents
Alan Modra [Tue, 8 May 2018 05:02:04 +0000 (14:32 +0930)]
PR23141, SIGSEGV in bfd_elf_set_group_contents

Another fuzzing fix.  I think it's reasonable to simply strip out any
group section that is too weird for objcopy to handle.

PR 23141
* objcopy.c (is_strip_section): Strip groups without a valid
signature symbol.

6 years agoCorrect powerpc spe opcode lookup
Alan Modra [Mon, 7 May 2018 02:05:22 +0000 (11:35 +0930)]
Correct powerpc spe opcode lookup

Defining SPE2_OPCD_SEGS as 13 discounts the possibility that we'd
ever look up spe2_opcd_indices[14..16], which I think is possible.
Extend that array to size 16+1, using the macros we use to index the
array.  Similarly use the index macros for PPC_OPCD_SEGS and
VLE_OPCD_SEGS.

* ppc-dis.c (PPC_OPCD_SEGS): Define using PPC_OP.
(VLE_OPCD_SEGS, SPE2_OPCD_SEGS): Similarly, using macros used to
partition opcode space for index lookup.

6 years agowatchpoint-unaligned.exp: Use skip_hw_watchpoint_tests
Jan Kratochvil [Tue, 8 May 2018 12:26:19 +0000 (14:26 +0200)]
watchpoint-unaligned.exp: Use skip_hw_watchpoint_tests

gdb/testsuite/ChangeLog
2018-05-08  Jan Kratochvil  <jan.kratochvil@redhat.com>

* gdb.base/watchpoint-unaligned.exp: Use skip_hw_watchpoint_tests.

6 years ago[spu] Fix "info spu event" output formatting
Ulrich Weigand [Tue, 8 May 2018 12:13:12 +0000 (14:13 +0200)]
[spu] Fix "info spu event" output formatting

The formatting of the output of the "info spu event" command changed, causing
spurious test suite failures.  Use phex instead of phex_nz to get back the
expected format, and fix emission of new line characters.

gdb/ChangeLog:
2018-05-08  Ulrich Weigand  <uweigand@de.ibm.com>

* spu-tdep.c (info_spu_event_command): Fix output formatting.

6 years agoPrevent a memory exhaustion failure when running objdump on a fuzzed input file with...
Nick Clifton [Tue, 8 May 2018 11:51:06 +0000 (12:51 +0100)]
Prevent a memory exhaustion failure when running objdump on a fuzzed input file with corrupt string and attribute sections.

PR 22809
* elf.c (bfd_elf_get_str_section): Check for an excessively large
string section.
* elf-attrs.c (_bfd_elf_parse_attributes): Issue an error if the
attribute section is larger than the size of the file.

6 years agoSimplify VLE handling in print_insn_powerpc().
Peter Bergner [Tue, 8 May 2018 01:47:54 +0000 (20:47 -0500)]
Simplify VLE handling in print_insn_powerpc().

opcodes/
* ppc-dis.c (print_insn_powerpc) <insn_is_short>: Replace this...
<insn_length>: ...with this.  Update usage.
Remove duplicate call to *info->memory_error_func.

6 years agoEnable Intel MOVDIRI, MOVDIR64B instructions
H.J. Lu [Mon, 7 May 2018 16:30:02 +0000 (09:30 -0700)]
Enable Intel MOVDIRI, MOVDIR64B instructions

gas/

* config/tc-i386.c (cpu_arch): Add .movdir, .movdir64b.
(cpu_noarch): Likewise.
(process_suffix): Add check for register size.
* doc/c-i386.texi: Document movdiri, movdir64b.
* testsuite/gas/i386/i386.exp: Run MOVDIR{I,64B} tests.
* testsuite/gas/i386/movdir-intel.d: New file.
* testsuite/gas/i386/movdir.d: Likewise.
* testsuite/gas/i386/movdir.s: Likewise.
* testsuite/gas/i386/movdir64b-reg.s: Likewise.
* testsuite/gas/i386/movdir64b-reg.l: Likewise.
* testsuite/gas/i386/x86-64-movdir-intel.d: Likewise.
* testsuite/gas/i386/x86-64-movdir.d: Likewise.
* testsuite/gas/i386/x86-64-movdir.s: Likewise.
* testsuite/gas/i386/x86-64-movdir64b-reg.s: Likewise.
* testsuite/gas/i386/x86-64-movdir64b-reg.l: Likewise.

opcodes/

* i386-dis.c (Gva): New.
(enum): Add PREFIX_0F38F8, PREFIX_0F38F9,
MOD_0F38F8_PREFIX_2, MOD_0F38F9_PREFIX_0.
(prefix_table): New instructions (see prefix above).
(mod_table): New instructions (see prefix above).
(OP_G): Handle va_mode.
* i386-gen.c (cpu_flag_init): Add CPU_MOVDIRI_FLAGS,
CPU_MOVDIR64B_FLAGS.
(cpu_flags): Add CpuMOVDIRI and CpuMOVDIR64B.
* i386-opc.h (enum): Add CpuMOVDIRI, CpuMOVDIR64B.
(i386_cpu_flags): Add cpumovdiri and cpumovdir64b.
* i386-opc.tbl: Add movidir{i,64b}.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.