sqlcipher: specify tclConfig.sh directory

Otherwise it will search around, and if the host has it then it breaks.
Fixes:
http://autobuild.buildroot.net/results/057/0572a9a1f69ee214efb10863f5d2852b25bf4f54/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

slang: forcibly disable oniguruma support

If the host has oniguruma installed then slang can detect it and try to
(wrongly) link against it resulting in build failure. Fixes:
http://autobuild.buildroot.net/results/51f/51ff079ebbd363e0445d226ec80bc28e524fd88c/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

axfs: add new filesystem type

The Advanced XIP File System is a Linux kernel filesystem driver that
enables files to be executed directly from flash or ROM memory rather
than being copied into RAM. It has the ability to store individual
*pages* in a file uncompressed/XIP or compressed/Demand Paged.

This commit only adds support for 'XIP all' mode, so all the files that
have the execute attribute set will be XIP'ed.

At the moment, the FS is not supported in Linux mainline (v4.3-rc5), so
the kernel has to be built with the axfs patches to be able to read it.
Patches can be found here: https://github.com/jaredeh/axfs

[Thomas: rewrap Config.in help text.]

Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

axfsutils: add new package

Tools for building AXFS Filesystem.

The Advanced XIP File System is a Linux kernel filesystem driver that
enables files to be executed directly from flash or ROM memory rather
than being copied into RAM. It has the ability to store individual
*pages* in a file uncompressed/XIP or compressed/Demand Paged.

Source:
https://github.com/jaredeh/axfs

[Thomas:
 - add hash file.
 - use $(INSTALL) -D -m 0755 instead of cp for installing mkfs.axfs.]

Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ffmpeg: Add optional dependencies

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gpsd: add upstream patch to address bug #8401

This commit backports upstream gpsd commit
3e25e2167beb3936de3986fad9b6c9bdec82b81f, which fixes the build of the
NMEA driver.

Fixes Buildroot bug #8401, reported by kevin.alden2@gmail.com.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

system: add options for /bin /sbin and /lib to be symlinks into /usr

systemd is increasingly expecting things to live in /usr/bin, /usr/sbin
or /usr/lib nad not in /bin, /sbin or /lib. It has inherited those
expectations from a Fedora change:
    https://fedoraproject.org/wiki/Features/UsrMove

Note however, that systemd does support /usr being on a separate
filesystem; it just expects an initramfs to mount it before the final
switchroot over to the actual rootfs.

But the traditional use-case for Buildroot is not to boot with an
initramfs; although that is totally feasible, that's probably not what
is commonly done in the vast majority of cases.

However, a lot of packages still install stuff directly into /bin,
/sbin or /lib, which systemd may need early-on in the boot process,
even before it may have a chance to mount /usr. Even though we can
tell systemd, at configure-time, where it should expect programs to
be at runtime, it does not make sense to go head-first against an
upstream wa^Hill.

Add an option so that /bin, /sbin and /lib be symlinks to /usr/bin
and /usr/sbin. That option is forcibly enabled when the init system
is systemd.

Note: we need not handle /lib32 or /lib64, as they already are symlinks
to /lib, which means they will automatically be redirected to /usr/lib,
as /usr/lib32 and /usr/lib64 already are.

Furthermore, this means we're no longer supporting a split-usr setup, so
the corresponding configure options have been removed as well for
systemd and, when using a merged /usr, for eudev as well.

In Buildroot, we decided (with this patch) not to support a split-usr
when systemd is used as an init system. This is a design decision, not
a systemd issue. Thus the select is with BR2_INIT_SYSTEMD rather than
with BR2_PACKAGE_SYSTEMD.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Mike Williams <mike@mikebwilliams.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Tested-by: Mike Williams <mike@mikebwilliams.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

systemd: Bump version and change hosting

systemd seems to do its release using their github repository up from
the 221 version.

Since they use the auto generated release, we can't have a hash file.

They don't provide the Makefile.in file in the 'po' directory.
We need to run intltoolize so it's created for us.

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Tested-by: Mike Williams <mike@mikebwilliams.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ffmpeg: disable MIPS DSP options by default

DSP support depends on the core implementation, not on the ISA, so
enabling it for mips64r2 is not correct since you can build a mips64r2
core without DSP support.

Disable mipsdspr1 and mipsdspr2 options by default and let the user
enable them via the BR2_PACKAGE_FFMPEG_EXTRACONF kconfig option, which
will take preference and override the default values.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xtables-addons: bump to version 2.9

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wireless-regdb: bump to version 2015.10.13

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

apache: bump to version 2.4.17

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

adwaita-icon-theme: bump to version 3.18.0

Also switch from ftp to http, it's better for firewall-laden places.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libsoup: bump to version 2.52.1

Disabled vala bindings since they're not used by the current buildroot
packages and it requires gobject-introspection which we don't provide
yet.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pango: bump to version 1.38.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

glib-networking: bump to version 2.46.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libglib2: bump to version 2.46.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 3.2.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cloog: bump to version 0.18.4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lxc: bump version to 1.1.4

Signed-off-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ffmpeg: bump version to 2.8.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fping: bump to version 3.11

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

harfbuzz: bump to version 1.0.5

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

spice-protocol: bump to version 0.12.10

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sqlite: bump to version 3.9.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-pypcap: explicitly call pyrexc using python2 to fix too long shebang

python-pypcap calls thez pyrexc Python script directly. This script is
generated by the pyrexc installation with a shebang line that has a
full path to our host-python interpreter. Unfortunately, since Linux
cuts the shebang line at 128 characters, it means that if you have an
output directory with a very very long name, the pyrexc script does
not run.

To solve that, we explicitly invoke pyrexc with the python2
interpreter.

Note that invoking the python2 interpreter directly is safe because
python-pypcap is only available for Python 2.x, so we are just that
$(HOST_DIR)/usr/bin/python2 is available.

Fixes #8281.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ffmpeg: change tarball compression to xz

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

busybox: bump to version 1.24.0

Disable CONFIG_FEATURE_SYNC_FANCY in the busybox.config because that
option causes build failures for any uClibc based toolchains since it
requires syncfs() support, which doens't exist in uClibc.

This new option has been introduced in 1.24.0, so despite of disabling
it, we are not losing anything that we had before.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

squeezelite: fix license typo

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

liquid-dsp: pass the supported x86 CPU extensions

By default, the liquid-dsp configure script looks at the current CPU
to find which x86 CPU extensions are supported. Those checks use
AC_TRY_RUN(), which cannot work in a cross-compilation environment,
and would anyway be wrong.

To fix this, we explicitly pass the appropriate ac_cv_have_<foo>_ext
autoconf cache variables.

Fixes:

  http://autobuild.buildroot.org/results/eb0/eb002463ed82de461fae11211415c07883a95386/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

squeezelite: alsa-lib mixer support is mandatory

Fixes:

  http://autobuild.buildroot.net/results/4f5/4f53ed80c7f135c33341919be4d5256409a2b23a/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

eventlog: new package

eventlog is a library for creating structured events from
applications, and is the workhorse behind syslog-ng's own messages.

[Thomas:
 - fix alphabetic ordering in package/Config.in, as noticed by
   Vicente.
 - rewrap Config.in help text and add some URL as a reference (though
   the eventlog project doesn't seem to have a real web page)
 - remove useless slash at the end of EVENTLOG_SITE
 - make the license info more specific: it's a BSD-3c license
 - add a hash file.]

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mesa3d: Fix dri checks

"MESA3D_EGL_PLATFORMS = drm" is only needed when dri drivers are
enabled:
http://cgit.freedesktop.org/mesa/mesa/tree/configure.ac?h=10.6#n1653

Unconditionally enable dri support, also for gallium drivers, quoting
http://cgit.freedesktop.org/mesa/mesa/tree/configure.ac?h=10.6#n1382

 # Strictly speaking libgbm does not require --enable-dri, although
 # both of its backends do. Thus one can build libgbm without any
 # backends if --disable-dri is set.
 # To avoid unnecessary complexity of checking if at least one backend
 # is available when building, just mandate --enable-dri.
   AC_MSG_ERROR([gbm requires --enable-dri])

Fixes
http://autobuild.buildroot.net/results/799/799f505594f668154af38cb2c2a1ed8a90337e9f/
http://autobuild.buildroot.net/results/d00/d00fe349e8710a1ad557507cf04b006216806868/
http://autobuild.buildroot.net/results/c7b/c7ba08c8cf54b2e7cf28c5e3454e92a408e724db/
http://autobuild.buildroot.net/results/cd7/cd717c9a3a1b0080192e7e765d990cce55513005/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

atk: bump to version 2.18

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: remove old/broken Atmel configurations

The at91rm9200df_defconfig configuration is really old: it builds a
2.6.38 kernel with the old days kernel patches and a 2010.06
U-Boot. It hasn't been updated since a long time, so let's get rid of
it.

The at91sam9260dfc_defconfig, at91sam9261ek_defconfig and
at91sam9263ek_defconfig refer to kernel defconfigs that no longer
exists, so they fail to build.

Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-good: update configure options

- remove legacy '--enable-xshm/--disable-xshm' option

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libv4l: bump version to 1.8.0

- add qt, qt5base/qt5gui/qt5widgets dependency for qv4l2
  (qt dependency was missing, qt5 support was added since 1.8.0)

- fix fix moc/rcc/uic detection in case host versions
  of moc-qt5, rcc-qt5 or uic-qt5 are present

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/rng-tools: add SysV init script

[Thomas: minor adjustments to make the script look more like our
standard init scripts.]

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ejabberd: add a .hash file

[Thomas: slightly tweak the comments.]

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ejabberd: bump to version 15.09

Remove patches that have been applied upstream and adapt the other
ones.

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

icu: bump to version 56.1

Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mesa3d: Add option to build OSMesa

Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Reviewed-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain: add mips64 for uClibc-ng

Filter out all other uClibc versions, as they containing
serious bugs for mips64.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/raspberrypi: use EABIhf

The SoC of the Raspberry Pi 1 is an ARM1176JZF-S, which features a VFPv2
FPU, so use the EABIhf target ABI, which is more efficient than EABI.
This is also the default on Raspbian.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

make: disable guile support

When building in a static only configuration with guile package
enabled, the following error happens:

 gc_pthread_redirects.h:37:22: fatal error: dlfcn.h: No such file or
 directory
   #   include <dlfcn.h>

The file gc_pthread_redirects.h comes from bdwgc, which gets built
before make in the autobuild test case indicated below. This header
file is known to incorrectly include <dlfcn.h>, unless GC_NO_DLOPEN is
specified.

IF GC_NO_DLOPEN is defined, another issue arises due to libguile and
libintl both defining locale_charset.

We could have kept the guile support enabled only on dynamic library
configurations, and disable it only for static library
configurations. However, the need for guile support in make on the
target seems highly unlikely, so we'd better simply disabling guile
support, which this commit does.

Fixes:

  http://autobuild.buildroot.net/results/814/8143ae0afac139845e5016058d85c800dc8527ad

[Thomas: tweak commit log.]

Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gdb: backport xtensa NPTL support

These changes allow debugging multithreaded NPTL xtensa applications and
inspect TLS variables.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sparc64: fix toolchain building when C++ is enabled

Disable libsanitizer for sparc64, too. Same problem as for
sparc, see https://bugs.busybox.net/show_bug.cgi?id=7951

Reported-By: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tvheadend: add dbus as optional dependency

Dbus is an optional dependency for tvheadend:
https://github.com/tvheadend/tvheadend/commit/9c7b6047d2e3040e14cdba89f46d8acb2a36a115

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imx-gpu-viv: add G2D libs and GPU tools selection

GPU package now includes libraries for GPU2D as well as several tools to
monitor and debug the GPUs.

GPU2D libraries have been tested with the example provided in the
package:
 # /usr/share/examples/fsl-samples/g2d/overlay_test/g2d_overlay_test
 Overlay rendering time 53861us .

The tools have been tested with the following commands:
 # cd /usr/share/examples/viv_samples/vdk/
 # apitrace trace --api egl ./tutorial7 &
 # gmem_info
 ... display memory use per PID ...
 # killall tutorial7
 # apitrace replay tutorial7.trace
 # eglretrace tutorial7.trace

[Thomas: tweak the installation logic to be more explicit about paths
being copied, and to use cp -dpfr consistently.]

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/iqvlinux: new package

The PCI support needs to be checked since this driver is based
on it. Otherwise the build fail with:
 #error "This driver requires PCI support to be available"

But this message is concealed by several occurrence of this
one:
 error: implicit declaration of function 'pci_find_bus' [-Werror=implicit-function-declaration]

[Thomas:
 - fix minor typo in Config.in: s/Enthernet/Ethernet/
 - license is "GPLv2, BSD-3c", not "GPLv2 or BSD-3c"
 - remove IQVLINUX_PCI_CHECK, until a proper generic solution is
   implemented.]

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-validate: bump version to 1.6.0

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-libav: bump version to 1.6.0

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-ugly: bump version to 1.6.0

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-bad: bump version to 1.6.0

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-good: bump version to 1.6.0

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-base: bump version to 1.6.0

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gstreamer1: bump version to 1.6.0

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tvheadend: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/vlc: Add optional dependency to libtaglib

taglib is an optional dependency to vlc:
http://git.videolan.org/gitweb.cgi?p=vlc.git;a=blob;f=configure.ac;h=b9bd76a829da8ee8b8ea69a141827abd87c47cb2;hb=HEAD#l4020

$ output/host/usr/bin/i586-buildroot-linux-uclibc-readelf -a
  output/target/usr/lib/vlc/plugins/meta_engine/libtaglib_plugin.so
  | grep NEEDED
 0x00000001 (NEEDED)                     Shared library: [libvlccore.so.8]
 0x00000001 (NEEDED)                     Shared library: [librt.so.1]
 0x00000001 (NEEDED)                     Shared library: [libpthread.so.1]
 0x00000001 (NEEDED)                     Shared library: [libdl.so.1]
 0x00000001 (NEEDED)                     Shared library: [libtag.so.1]
 0x00000001 (NEEDED)                     Shared library: [libz.so.1]
 0x00000001 (NEEDED)                     Shared library: [libstdc++.so.6]
 0x00000001 (NEEDED)                     Shared library: [libm.so.1]
 0x00000001 (NEEDED)                     Shared library: [libc.so.1]
 0x00000001 (NEEDED)                     Shared library: [libgcc_s.so.1]

Add it to vlc.mk to get reproducable builds.

For taglib itself zlib is only an optional dependency
http://git.buildroot.net/buildroot/tree/package/taglib/taglib.mk#n13

But taglib support in vlc depends on zlib:
http://git.videolan.org/gitweb.cgi?p=vlc.git;a=blob;f=modules/meta_engine/Makefile.am;h=003d292cdc9a80762a6515e0ced77552f13b5120;hb=HEAD#l10
so we select BR2_PACKAGE_ZLIB if BR2_PACKAGE_TAGLIB is selected.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uboot: arm64 arch build support

For a 64bit arm architecture, Buildroot uses arm64 terminology and
from the top-level Makefile KERNEL_ARCH is set to arm64 which is then
passed to the uboot build.  This causes a compilation issue as uboot
uses the top-level system architecture as it's $(ARCH).  So
arch/$(ARCH)/Makefile doesn't work with arm64 unless we adjust the
arch.

[Thomas:
 - rewrap commit message text.
 - simplify comment in the code.]

Signed-off-by: Ronak Desai <ronak.desai@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/dbus: Add optional dependency to xlib_libSM

To detect X11 support dbus uses the autoconf macro AC_PATH_XTRA
http://cgit.freedesktop.org/dbus/dbus/tree/configure.ac#n1264

This macro checks for the optional presence of libICE:
http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=blob;f=lib/autoconf/libs.m4;h=d2040d731f81fc1693e01d118c45d51ad169d56a;hb=HEAD#l472

quoting dbus configure with libICE not present:
checking for IceConnectionNumber in -lICE... no

quoting dbus configure with libICE being present:
checking for IceConnectionNumber in -lICE... yes

The binary usr/bin/dbus-launch is being linked to libICE and libSM if
the packages are available:

$ output/host/usr/bin/i586-buildroot-linux-uclibc-readelf -a
  output/target/usr/bin/dbus-launch | grep NEEDED
 0x00000001 (NEEDED)                     Shared library: [libdbus-1.so.3]
 0x00000001 (NEEDED)                     Shared library: [libSM.so.6]
 0x00000001 (NEEDED)                     Shared library: [libICE.so.6]
 0x00000001 (NEEDED)                     Shared library: [libX11.so.6]
 0x00000001 (NEEDED)                     Shared library: [libc.so.1]

To get a reproducable build add libSM as optional dependency to dbus,
libSM pulls in the dependency to libICE.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/dbus: remove empty line from dbus.mk

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

arch: add support for mips32r6 and mips64r6 variants

- Add support for mips32r6 and mips64r6 target architecture variants
- Disable unsupported gcc versions
- Disable unsupported binutils versions
- Disable unsupported external toolchains
- Disable unsuported C libraries
- Add a hook in order to make glibc compile for MIPS R6.

[Thomas: slightly tweak the glibc hack explanation, to make it
hopefully clearer.]

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libevdev: disable runtime tests

Add new configure option '--disable-runtime-tests' and use it do
disable runtime tests which fail to compile on some uclibc
configurations.

Fixes [1], [2]:
  test-libevdev-init.c: In function 'test_set_clock_id':
  test-libevdev-init.c:493: error: 'CLOCK_MONOTONIC_RAW' undeclared (first use in this function)

and compile failure for !BR2_USE_MMU configuration:
  test-main.c:(.text+0x8): undefined reference to `_fork'

[1] http://autobuild.buildroot.net/results/0d0/0d0a987471ce8e9f76fc96e0ae8f0bfeadb45028/
[2] http://autobuild.buildroot.net/results/939/9392033f1b8d2c8e4e8791c90918dabbe28a7067/

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libevdev: bump version to 1.4.4

>From [1]:

A couple of cleanups, one notable fix: we now transparently fix invalid
ABS_MT_TRACKING_ID ranges to something sensible.

The touchpad-edge-detector tool prints out suggested hwdb rules for
resolution overrides. And since the resolution is the main thing to fix on a
device, the libevdev-tweak-device now has a --resolution argument to quickly
set the resolution on the x/y axes.

[1] http://lists.freedesktop.org/archives/input-tools/2015-August/001210.html

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mrouted: DVMRP missing subnet

Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libuv: add a hash file

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/imagemagick: bump version to 6.9.2-4

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libuv: bump to version 1.7.5

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/shairport-sync: bump to version 2.4.1

- Remove backported from upstream patch.
- Fix autoreconf comment that was wrong.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/liquid-dsp: fix legal-info

The license file is named LICENSE, not COPYING.

Fixes:
    http://autobuild.buildroot.org/results/c82/c82baa5549bdca405e0f077c7ab8c77dcec9a582/
    http://autobuild.buildroot.org/results/9c7/9c76ce4f9d69db1aa67cc9c07e4c5c2e5e8d93e0/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: guillaume william brs <guillaume.bressaix@gmail.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tzdata: Updated TZDATA_SITE to use http url

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/zic: Updated ZIC_SITE to use http url

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tzdata: bump version to 2015g

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/zic: bump version to 2015g

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

squeezelite: new package

[Thomas:
  - replicate the ffmpeg "depends on" related to the broken NIOS2
    toolchains to the BR2_PACKAGE_SQUEEZELITE_FFMPEG option.
  - use the github helper function.
  - add hash file.]

Signed-off-by: Hiroshi Kawashima <kei-k@ca2.so-net.ne.jp>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

audit: Add systemd support

The main .service file is installed by audit.
We are using tmpfiles mechanisms to create the log directory, which
would not exists otherwise since /var/log points to /tmp

[Thomas: add explicit --disable-systemd when systemd is not used.]

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

audit: Bump version

Remove patch as it was merged in this release:
https://fedorahosted.org/audit/changeset/1117

[Thomas: remove autoreconf, no longer needed.]

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

liquid-dsp: new package

[Thomas:
  - add patch to fix autoreconf issue, and use LIQUID_DSP_AUTORECONF =
    YES instead of an horrible hack calling aclocal/autoconf manually.
  - use the github macro instead of hand-coding <pkg>_SITE and
    <pkg>_SITE_METHOD. This allows to remove <pkg>_SITE_METHOD
    entirely.
  - use a full hash as the <pkg>_VERSION
  - remove trailing whitespace everywhere.
  - use one single assignment of LIQUID_DSP_CONF_OPTS
  - fix the comment about the eglibc/musl dependency (it was only
    mentioning eglibc, and the condition was inverted)
  - add the musl/glibc dependency on the package option itself
  - make the package depend on dynamic library support, since the
    makefile unconditionally builds a shared library.
  - add hash file.]

Signed-off-by: Guillaume William Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nodejs: fix typo for arm predefined macro used for atomicops

Add patch to fix typo for arm predefined macrco in (__ARM_ARCH_6KZ__
vs. __ARM_ARCH_6ZK__) in atomicops_internals_arm_gcc.h

Fixes #8391: Node.js 0.12.7 fails to build on raspberry_pi defconfig

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libusb-compat: backport patch to use standard C99 types

Fixes:

  http://autobuild.buildroot.net/results/e63/e6360386a0a99900b83494924494ec40552d8dbe/

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/dovecot-pigeonhole: bump version to 0.4.9

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/{mesa3d, mesa3d-headers}: bump version to 11.0.3

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wpa_supplicant: Add an explicit option to enable nl80211.

Currently, nl80211 support is conditionnal with libnl being enabled,
using implicit dependencies.  This causes problems since it is not
obvious and wpa_supplicant without nl80211 isn't what most user expects.

If nl80211 isn't enabled, then buildroot only enables the wext driver,
which will only work if some deprecated kernel feature isn't left
disabled, or if using a outdated out-of-tree linux driver which doesn't
use the cfg80211 infrastructure.

This makes nl80211 support an explicit option, which
"select BR2_PACKAGE_LIBNL" accordingly.  To handle upgrades nicely, it
would have been nice to have "default y if BR2_PACKAGE_LIBNL", but
Kconfig treats this as a circular dependency.  So instead, this enables
the option by default, which is less worse than not enabling nl80211
when it was previously implicitely enabled.

[Thomas:
 - rewrap Config.in help text
 - add comment about thread dependency.]

Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

skeleton: Remove ftp user and /home/ftp

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

vsftpd: Add ftp user creation

In order to remove '/home/ftp' and the ftp user from the 'skeleton'
package, we need to add the creation of the ftp users to the package so
it still work out of the box (with an anonymous user).

[Thomas:
 - remove the VSFTPD_FIX_HOME_PERMISSIONS variable, and simply put the
   additional command in VSFTPD_INSTALL_TARGET_CMDS.
 - slightly tweak the comment.]

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

proftpd: Add ftp user creation

In order to remove '/home/ftp' and the ftp user from the 'skeleton'
package, we need to add the creation of the ftp users to the package so
it still work out of the box (with an anonymous user).

Signed-off-by Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libdrm: update driver options

- add AMD GPU driver (available since 2.4.63)
- freedreno is no longer experimental (since 2.4.59)
- add NVIDIA Tegra driver (available since 2.4.59)
- update help texts (install vs. installs, change to complete
  sentences)

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/efl: remove shared version number

This is necessary to move efl packages to package directory
and prepare the efl version bump to the latest release.

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qemu: add new board support for qemu-system-sparc64

SPARC64 builds can be tested with Qemu.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain: add sparc64 architecture support

Introduce sparc64 architecture to buildroot.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt: fix build for arm with BR2_STATIC_LIBS

Some Buildroot-generated static toolchains for ARM do not have
dlfcn.h header, which breaks builds of qt-4.8.7 because its
QtCore's plugin loader expects this header to be present (and
dynamic libraries to be supported). For certain platforms without
dynamic libraries, there is a QT_NO_DYNAMIC_LIBRARY constant
defined in plugin loader's source. This patch puts that constant
into Qt's build environment if Buildroot is configured without
shared library support.

Fixes:
- http://autobuild.buildroot.net/results/11a4c19638ca211bd2a424fd92602166235c9433
- http://autobuild.buildroot.net/results/c056e8781558267f6971a5f017f47e90dcf24e07
- http://autobuild.buildroot.net/results/b8f34afa8686e890a1a3882a52081bb6a3b9c13b
and several others.

Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

media-ctl: remove package

Package media-ctl is out-dated, source (and developement) have been moved
to v4l-utils since June 2014. Up-to-date version is available in
the libv4l package (BR2_PACKAGE_LIBV4L/BR2_PACKAGE_LIBV4L_UTILS).

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libv4l: update v4l-utils help text (add more listed tools)

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fbterm: fix musl compile

- add missing include, fixes:

  fbio.cpp:33:8: error: ‘fd_set’ does not name a type
   static fd_set fds;

  improxy.cpp:439:3: error: ‘fd_set’ was not declared in this scope

- add missing WAIT_ANY define, fixes:

  fbterm.cpp: In member function ‘void FbTerm::processSignal(u32)’:
  fbterm.cpp:212:22: error: ‘WAIT_ANY’ was not declared in this scope
      s32 pid = waitpid(WAIT_ANY, 0, WNOHANG);

Fixes:
http://autobuild.buildroot.net/results/ab2/ab2334700b44bac233994b76f2acf1795f0

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/riotboard: bump kernel to version 4.2.3

Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/Config.in: fix alphabetical order

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/Config.in: correct capitalization of menu items

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/qemu: add sh4eb (big endian) sample

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gnuradio: break dependency chain by using 'depends on'

This commit fixes the following recursive dependency:

package/python/Config.in:5:error: recursive dependency detected!
package/python/Config.in:5: symbol BR2_PACKAGE_PYTHON is selected by BR2_PACKAGE_GNURADIO_PYTHON
package/gnuradio/Config.in:46: symbol BR2_PACKAGE_GNURADIO_PYTHON is selected by BR2_PACKAGE_GNURADIO_UTILS
package/gnuradio/Config.in:55: symbol BR2_PACKAGE_GNURADIO_UTILS depends on BR2_PACKAGE_PYTHON_NUMPY_ARCH_SUPPORTS
package/python-numpy/Config.in:1: symbol BR2_PACKAGE_PYTHON_NUMPY_ARCH_SUPPORTS depends on BR2_PACKAGE_PYTHON

by replacing the "select BR2_PACKAGE_PYTHON" by a "depends on
BR2_PACKAGE_PYTHON", and ditto for the BR2_PACKAGE_GNURADIO_PYTHON
selection.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>