configure: bump up libdrm_radeon requirement to 2.4.54

Required for Mullins.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

dri3: Enable GLX_MESA_query_renderer on DRI3 too

This should have happend around the time of commit 4680d23, but Keith's
DRI3 patches and my GLX_MESA_query_renderer patches crossed in the mail.

I don't have a working DRI3 setup, so I haven't been able to actually
verify this.  I'm hoping that someone can piglit this for me on DRI3...
It's also unfortunate the DRI2 and DRI3 can't share more code.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: Keith Packard <keithp@keithp.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

util: Don't attempt to redefine INFINITY/NAN on VS 2013.

There are now provided by VS.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

mesa: VS 2013 does not provide strcasecmp.

A define is necessary, like for earlier VS versions.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

egl: Don't attempt to redefine stdint.h types with VS 2010.

Just include stdint.h.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

scons: Don't use bundled C99 headers for VS 2013.

Use the ones provided by the compiler instead.

NOTE: External trees should be updated to not include '#include/c99'
directory directly, but rather rely on scons/gallium.py to do the right
thing.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

scons: Don't restrict MSVC_VERSION values.

Saves the trouble of continuously needing to update.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

draw: Prevent signed/unsigned comparisons.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

st/vega: Prevent signed/unsigned comparisons.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

scons: Adjust the warnings for VS.

Silence insignificant warnings so significant warnings have a chance to
stand out.

The only abundant warning that's not silenced here is "C4018:
signed/unsigned mismatch", as it could hide security issues, so it's better
to actually fix the code.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

util/u_debug_flush: Use util_snprintf.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

targets/omx: add nouveau target

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

targets/omx: use GALLIUM_VIDEO_CFLAGS

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

targets/pipe-loader: cleanup version-script

Drop the version/name tag from the script as it was never
meant to be there. Add swrast_create_screen as it is used
when loading swrast. Rename the file to pipe.sym.

v2: Rebase on top of the LD_NO_UNDEFINED changes.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>

targets/opencl: hide all the exported llvm/clang mayhem... hopefully

Both llvm and clang polute the exported symbol table, as soon
as we try to link with either one. Other than those two
everything else looks good (clean).

Cc: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>

targets/egl-static: freshen up the version script

Namely drop the version/name tag of the exported symbol, and
rename the filename to egl.sym.

v2: Rebase on top of the LD_NO_UNDEFINED changes.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

targets/gbm: add version-script to limit exported symbols

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

targets/vdpau: use version script to limit the exported symbols

Using export-symbols-regex is the least desirable method of restricting
the exported symbols, as is completely messes up with the symbol table.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

targets/omx: drop the version from the omx targets

Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

targets/omx: use version script to limit amount of exported symbols

Using export-symbols-regex is the least desirable method of restricting
the exported symbols, as is completely messes up with the symbol table.

radeon_drm_winsys_create is not needed, avoid exporting it.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

targets/dri: use a single version script to restict exported symbols

Rather than having multiple (almost) identical version scripts use
a single one.

Cc: Christian König <christian.koenig@amd.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

targets/xvmc: limit the amount of exported symbols

In the presence of LLVM the final library exports every symbol from
the llvm namespace. Resolve this by using a version script (w/o the
version/name tag).

Considering that there are only ~25 symbols, explicitly list them
to minimize the chances of rogue symbols sneaking in.

Drop the *winsys_create functions as they were only meant for
gl-vdpau interop.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

targets/osmesa: hide osmesa_create_screen

The symbol is not meant to be exported, and its presence was
only a side effect due to the missing visibility flags.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

targets/pipe-loader: drop driver_descriptor symbol from swrast

The symbol is used for hardware only drivers. For swrast the
loader uses swrast_create_screen. Add VISIBILITY_CFLAGS while
we're here.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>

mesa: add extra null checks in vbo_rebase_prims()

v2 [idr]: Move declarations before code to prevent MSVC build breaks.

Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: add missing null checks in _tnl_register_fastpath()

Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Add _mesa_error_no_memory for logging out-of-memory messages

This can be called from locations that don't have a context pointer
handy.  This patch also adds enough infrastructure so that the unit
tests for the GLSL compiler and the stand-alone compiler will build and
function.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>

glsl: make static constant variables "static const"

This allows them to be moved to .rodata, and allow us to be sure that they
will not be modified.

Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>

docs: update 10.2 release notes

Signed-off-by: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965: Enable INTEL_performance_query for Gen5+.

Signed-off-by: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Implement INTEL_performance_query.

Using the existing driver hooks made for AMD_performance_monitor, implement
INTEL_performance_query functions.

v2: Whitespace changes.
v3: Whitespace changes, add a _mesa_warning()

Signed-off-by: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Add core support for the GL_INTEL_performance_query extension.

Like AMD_performance_monitor, this extension provides an interface for
applications (and OpenGL-based tools) to access GPU performance
counters. Since the exact performance counters available vary between
vendors and hardware generations, the extension provides an API the
application can use to get the names, types, and minimum/maximum
values of all available counters.

Applications create performance queries based on available query
types, and begin/end measurement collection. Multiple queries can be
measuring simultaneously.

v2: Whitespace changes
v3: src/mapi/glapi/gen/gl_API.xml: Also expose the functions to GLES2.
v4: Whitespace changes, static_dispatch="false" for all functions, fix
    dispatch_sanity test for GLES2 functions

Signed-off-by: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Add INTEL_performance_query enums to tests/enum_strings.cpp

Signed-off-by: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

Regenerate gl_mangle.h.

Signed-off-by: Petri Latvala <petri.latvala@intel.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>

docs: update ARB_buffer_storage for nouveau

nouveau: add ARB_buffer_storage support

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nouveau: remove cb_dirty, it's never used

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0: treat non-linear 2DRect textures the same as 2D

This fixes textureGather(2DRect) piglit tests, and does not appear to
have any adverse effects.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

mesa/st: enable carry/borrow lowering pass

This handles the last of the ARB_gs5 instructions currently present in
mesa.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl: add lowering passes for carry/borrow

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: Eliminate gl_shader_program::InternalSeparateShader

This was a work-around to allow linking a program with only a fragment
shader in a GLES context.  Now that we have GL_EXT_separate_shader_objects
in GLES contexts, we can just use that.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

mesa: Enable GL_EXT_separate_shader_objects for OpenGL ES

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

glsl: Sort the list of extensions

ARB, OES, then everything else.  If there's ever a KHR shading language
extension, it should go between ARB and OES.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>

mesa: Remove support for desktop OpenGL GL_EXT_separate_shader_objects

I don't know of any applications that actually use it.  Now that Mesa
supports GL_ARB_separate_shader_objects in all drivers, this extension
is just cruft.

The entrypoints for the extension remain in the XML.  This is done so
that a new libGL will continue to provide dispatch support for old
drivers that try to expose this extension.

Future patches will add OpenGL ES GL_EXT_separate_shader_objects, but
that's a different thing.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

mesa/sso: Enable GL_ARB_separate_shader_objects by default

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

sso: Add display list support for ARB_separate_shader_objects new functions

With this patch, the piglit arb_separate_shader_object-dlist test
passes.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

linker: Modify cross_validate_outputs_to_inputs to match using explicit locations

This will be used for GL_ARB_separate_shader_objects.  That extension
not only allows separable shaders to rendezvous by location, but it also
allows traditionally linked shaders to rendezvous by location.  The spec
says:

    36. How does the behavior of input/output interface matching differ
        between separable programs and non-separable programs?

        RESOLVED: The rules for matching individual variables or block
        members between stages are identical for separable and
        non-separable programs, with one exception -- matching variables
        of different type with the same location, as discussed in issue
        34, applies only to separable programs.

        However, the ability to enforce matching requirements differs
        between program types.  In non-separable programs, both sides of
        an interface are contained in the same linked program.  In this
        case, if the linker detects a mismatch, it will generate a link
        error.

v2: Make sure consumer_inputs_with_locations is initialized when
consumer is NULL.  Noticed by Chia-I.

v3: Rebase on removal of ir_variable::user_location.

v4: Replace a (stale) FINISHME with some good explanation comments from
Eric.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

linker: Sort shader I/O variables into a canonical order

v2: Rebase on removal of ir_variable::user_location.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

linker: Allow geometry shader without vertex shader for separable programs

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

linker: Assign varying locations for separable programs

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>

linker: Allow consumer stage or producer stage to be NULL

When linking a separable program that contains only a fragment shader,
the producer will be NULL.  Similar cases will exist with geometry
shaders and, eventually, tessellation shaders.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

linker: Refactor code that gets an input matching an output

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>

glsl: Exit when the shader IR contains an interface block instance

While writing the link_varyings::single_interface_input test, I
discovered that populate_consumer_input_sets assumes that all shader
interface blocks have been lowered to discrete variables.  Since there
is a pass that does this, it is a reasonable assumption.  It was,
however, non-obvious.  Make the code fail when it encounters such a
thing, and add a test to verify that behavior.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>

glsl/tests: Add first simple tests of populate_consumer_input_sets

Four initial tests:

* Create an IR list with a single input variable and verify that
  variable is the only thing in the hash tables.

* Same as the previous test, but use a built-in variable
  (gl_ClipDistance) with an explicit location set.

* Create an IR list with a single input variable from an interface block
  and verify that variable is the only thing in the hash tables.

* Create an IR list with a single input variable and a single input
  variable from an interface block.  Verify that each is the only thing
  in the proper hash tables.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>

linker: Refactor code that builds hash tables of varyings during linking

I want to make some changes to this code, but first I want to make some
unit tests for it... so that I can capture the pre- and
post-invariants.  Pulling the code out into its own function in a
non-anonymous namespace enables that.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

meta: Fix saving the program pipeline state

This code was broken in some odd ways before.  Too much state was being
saved, it was being restored in the wrong order, and in the wrong way.
The biggest problem was that the pipeline object was restored before
restoring the programs attached to the default pipeline.

Fixes a regression in the glean texgen test.

v3: Fairly significant re-write.  I think it's much cleaner now, and it
avoids a bug with some meta ops that use shaders (reported by Chia-I).

v4: Check Pipeline.Current against NULL instead of Pipeline.Default.
Suggested by Chia-I.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chia-I Wu <olv@lunarg.com>

mesa/sso: Refactor new function _mesa_bind_pipeline

Pull most of the guts out of _mesa_BindPipeline into a new utility
function that can be use elsewhere (e.g., meta).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

linker: Make lower_packed_varyings work with explicit locations

Don't do anything with variables that have explicitly assigned
locations.  This is also how built-in varyings are handled.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

glsl: Remove varying "base" parameters

In February 2013 Paul unified the values used for shader stage outputs
and shader stage inputs.  See commits 8a076c5f0^..eed6baf76.  Since that
time, the location_base parameters are always VARYING_SLOT_VAR0.
Instead of passing that around, just hard code it.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

glsl: Constify parameter to a couple varying_matches methods

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

clover: Add a stub implementation of clCreateImage() v3

Now that we are uisng the OpenCL 1.2 headers, applications expect all
the OpenCL 1.2 functions to be implemented.

This fixes linking errors with the piglit CL tests.

v2:
  - Use c++ features
  - Fix error code handling

v3:
  - Move <iostream> into api/util.hpp
  - Fix indentation

Reviewed-by: Francisco Jerez <currojerez@riseup.net>

docs: Add missing ARB_gpu_shader5 subfeature to GL3.txt

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>

docs: Mark ARB_multi_bind as done

...and update relnotes.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Enable ARB_multi_bind

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Implement glBindImageTextures

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Implement glBindVertexBuffers

v2: Use the user provided offset and stride when the buffer ID is zero.

Reviewed-by: Brian Paul <brianp@vmware.com> (v1)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v1)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v2)

mesa: Implement glBindBuffersRange

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Implement glBindBuffersBase

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Add _mesa_set_transform_feedback_binding()

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Refactor set_ubo_binding()

Make set_ubo_binding() just update the binding, and move the code
that does validation, flushes the vertices etc. into a new
bind_uniform_buffer() function.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Add helper functions for looking up multiple buffers

v2: Document the difference between _mesa_lookup_bufferobj() and
    _mesa_multi_bind_lookup_bufferobj().
v3: Don't create the buffer objects when they don't exist.

Reviewed-by: Brian Paul <brianp@vmware.com> (v2)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v2)

mesa: Refactor set_atomic_buffer_binding()

Make set_atomic_buffer_binding() just update the binding, and move
the code that does validation, flushes the vertices etc. into a new
bind_atomic_buffer() function.

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Implement glBindTextures

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Add a texUnit parameter to dd_function_table::BindTexture

This is for glBindTextures(), since it doesn't change the active
texture unit.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Add helper functions for looking up multiple textures

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Implement glBindSamplers

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

glapi: Add infrastructure for ARB_multi_bind

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Add functions for doing unlocked hash table lookups

This patch adds functions for locking/unlocking the mutex, along with
_mesa_HashLookupLocked() and _mesa_HashInsertLocked()
that do lookups and insertions without locking the mutex.

These functions will be used by the ARB_multi_bind entry points to
avoid locking/unlocking the mutex for each binding point.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Optimize unbind_texobj_from_texunits()

The texture can only be bound to the index that corresponds to its
target, so there is no need to loop over all possible indices
for every unit and checking if the texture is bound to it.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Add a _BoundTextures field in gl_texture_unit

This will be used by glBindTextures() when unbinding textures,
to avoid having to loop over all the targets.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Store the target index in gl_texture_object

This will be used by glBindTextures() so we don't have to look it up
for each texture.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965: Fix the file comment for intel_image.h

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

i965: Rename intel_regions.h to something more appropriate now.

We had the EGLimage structure laying around in intel_regions.h, but now
it's the only thing left in the file.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

i965: Delete the intel_regions.c code.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

i965: Drop region usage from DRI2 winsys-allocated buffers.

v2: Fix bad pointer on unreference (caught by Chad)

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

i965: Drop a funny assert about mt pitch.

I slipped this in in the region->pitch change from pixels to bytes, but I
don't see any reason for it any more -- the libdrm code doesn't appear to
divide pitch by a cpp.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

i965: Fix intel_bufferobj_buffer range for blit drawpixels.

If the stride wasn't width*cpp, we wouldn't track how much of the src is
busy, and allow a subdata into the end to proceed unsynchronized.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

i965: Drop use of intel_region from miptrees.

Note: region->width/height used to reflect the total_width/height padding
of separate stencil, though mt->total_width didn't.  region->width/height
was being used in EGL images, where the padded value would have been the
wrong one, so I converted them to use rb->Width/Height.

v2: Drop debug printf that slipped in (caught by Ken)

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

i965: Replace the region in DRIimage with just a BO pointer and stride.

Regions aren't refcounted safely for multithreaded applications, and
they're not terribly useful wrappers of a BO, so I'm trying to remove
them.

Even the stride I added here could probably be reduced to use of an
existing field in the __DRIimageRec, but I want this to be as mechanical
of a change as possible.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

i965: Make intel_set_texture_region just take a BO and pitch.

I want to do this to get the region removed from DRI images.  However, it
does mean that we won't share the intel_region between the rb and the
texture for texture_from_pixmap.  I think that's fine.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

i965: Stop making a pointless region for DRI2 to just throw it away.

I noticed that we were doing this while changing the DRI3 path to not use
regions, which involved changing the signature of
intel_update_winsys_renderbuffer_miptree() this way.

v2: Replace my comment with Chad's version.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net> (v1)
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

i965: Drop the global GEM name from regions.

Once a buffer has been named, drm_intel_bo_flink() is just a getter.

Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

i965: Drop the tiling argument to intel_miptree_create_for_bo.

The drm function to get the tiling is just a getter storing the two
pointers, so we don't need to go out of our way to avoid it.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

i965: Drop pointless cast of texObj to intelObj.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

i965: Move intel_region_get_aligned_offset() to be a miptree function.

All the consumers are doing it on a miptree.

v2: fix a silly duplicated dereference (review by Ken)

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net> (v1)
Reviewed-by: Chad Versace <chad.versace@linux.intel.com> (v1)

i965: Move intel_region_get_tile_masks() to be a miptree function.

All the consumers are doing it on a miptree.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

i965: Fix another broken offset-aligned-to-tile test.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

i965: Fix offset-aligned-to-tile test in dma_buf import.

v1 of the patch got pushed, insted of the v2 that I had reviewed.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

i965: Reuse intel_miptree_get_tile_offsets().

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

mesa: move declarations before code in texstore.c

To fix MSVC build.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>