Mark big and mach with ATTRIBUTE_UNUSED

Fix build on x86:

opcodes/disassemble.c: In function ‘disassembler’:
opcodes/disassemble.c:113:52: error: unused parameter ‘big’ [-Werror=unused-parameter]
 disassembler (enum bfd_architecture a, bfd_boolean big, unsigned long mach,
                                                    ^~~
opcodes/disassemble.c:113:71: error: unused parameter ‘mach’ [-Werror=unused-parameter]
 disassembler (enum bfd_architecture a, bfd_boolean big, unsigned long mach,
                                                                       ^~~~
cc1: all warnings being treated as errors

* disassemble.c (disassembler): Mark big and mach with
ATTRIBUTE_UNUSED.

Move common symbol check after bed->common_definition

bfd/

* elflink.c (elf_link_add_object_symbols): Move common symbol
check after bed->common_definition.

ld/

* testsuite/ld-elf/pr21903.s (start): Removed.
(_start): Likewise.
(__start): Likewise.
(main): Likewise.
(bar): New.

GDB/opcodes: Remove arch/mach/endian disassembler assertions

Fix `set architecture' and `set endian' command disassembly regressions
from commit 39503f82427e ("Delegate opcodes to select disassembler in
GDB"), and commit 003ca0fd2286 ("Refactor disassembler selection"), as
well as a MIPS compressed ISA disassembly target regression from commit
6394c606997f ("Don't use print_insn_XXX in GDB"), which caused assertion
failures to trigger.

For example with the `mips-linux-gnu' target we get:

$ cat main.c
int
main (void)
{
  return 0;
}
$ gcc -mips32r2 -O2 main.c -o main
$ gcc -mips16 -mips32r2 -O2 main.c -o main16
$ gdb
GNU gdb (GDB) 8.0.50.20170731-git
[...]
(gdb) file main
Reading symbols from main...done.
(gdb) show architecture
The target architecture is set automatically (currently mips:isa32r2)
(gdb) show endian
The target endianness is set automatically (currently big endian)
(gdb) disassemble main
Dump of assembler code for function main:
   0x00400500 <+0>: jr ra
   0x00400504 <+4>: move v0,zero
End of assembler dump.
(gdb) set architecture mips:isa64r2
The target architecture is assumed to be mips:isa64r2
(gdb) disassemble main
Dump of assembler code for function main:
   0x00400500 <+0>:
.../gdb/arch-utils.c:979: internal-error: int default_print_insn(bfd_vma, disassemble_info*): Assertion `info->mach == bfd_get_mach (exec_bfd)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) n
[...]
Command aborted.
(gdb) set architecture auto
The target architecture is set automatically (currently mips:isa32r2)
(gdb) set endian little
The target is assumed to be little endian
(gdb) disassemble main
Dump of assembler code for function main:
   0x00400500 <+0>:
.../gdb/arch-utils.c:978: internal-error: int default_print_insn(bfd_vma, disassemble_info*): Assertion `info->endian == (bfd_big_endian (exec_bfd) ? BFD_ENDIAN_BIG : BFD_ENDIAN_LITTLE)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) n
[...]
Command aborted.
(gdb) set endian auto
The target endianness is set automatically (currently big endian)
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) disassemble main
Dump of assembler code for function main:
   0x00400500 <+0>:
.../gdb/arch-utils.c:976: internal-error: int default_print_insn(bfd_vma, disassemble_info*): Assertion `info->arch == bfd_get_arch (exec_bfd)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) n
[...]
Command aborted.
(gdb) set architecture auto
The target architecture is set automatically (currently mips:isa32r2)
(gdb) file main16
Load new symbol table from "main16"? (y or n) y
Reading symbols from main16...done.
(gdb) disassemble main
Dump of assembler code for function main:
   0x00400501 <+0>:
.../gdb/arch-utils.c:979: internal-error: int default_print_insn(bfd_vma, disassemble_info*): Assertion `info->mach == bfd_get_mach (exec_bfd)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) n
Command aborted.
(gdb)

Remove the assertions then, restoring previous semantics:

(gdb) file main
Reading symbols from main...done.
(gdb) set architecture mips:isa64r2
The target architecture is assumed to be mips:isa64r2
(gdb) disassemble main
Dump of assembler code for function main:
   0x00400500 <+0>: jr ra
   0x00400504 <+4>: move v0,zero
End of assembler dump.
(gdb) set endian little
The target is assumed to be little endian
(gdb) disassemble main
Dump of assembler code for function main:
   0x00400500 <+0>: j 0x3800c
   0x00400504 <+4>: addiu s0,t0,0
End of assembler dump.
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) disassemble main
Dump of assembler code for function main:
   0x00400500 <+0>: add    %eax,%esp
   0x00400502 <+2>: add    %cl,(%eax)
   0x00400504 <+4>: add    %al,(%eax)
   0x00400506 <+6>: adc    %ah,0x0
End of assembler dump.
(gdb) set architecture auto
The target architecture is set automatically (currently mips:isa32r2)
(gdb) set endian auto
The target endianness is set automatically (currently big endian)
(gdb) file main16
Load new symbol table from "main16"? (y or n) y
Reading symbols from main16...done.
(gdb) disassemble main
Dump of assembler code for function main:
   0x00400501 <+0>: jr ra
   0x00400503 <+2>: li v0,0
End of assembler dump.
(gdb)

gdb/
* arch-utils.c (default_print_insn): Remove arch/mach/endian
assertions.

opcodes/
* disassemble.c (disassembler): Remove arch/mach/endian
assertions.

gdbarch: Use an anonymous union for target data in `gdbarch_info'

As an update to commit ede5f15146ae ("gdbarch.h: Change
gdbarch_info::tdep_info's type to void *") replace the definition of the
`tdep_info' member in `struct gdbarch_info' with an anonymous union,
comprising the original member, with its type reverted to `struct
gdbarch_tdep_info *', a `tdesc_data' member of a `struct tdesc_arch_data
*' type and an `id' member of an `int *' type.  Remove now unnecessary
casts throughout use places then, making code easier to read an less
prone to errors, which may happen with casting.

gdb/
* gdbarch.sh (gdbarch_info): Replace the `tdep_info' member with
a union of `tdep_info', `tdesc_data' and `id'.
* aarch64-tdep.c (aarch64_gdbarch_init): Use `info.tdesc_data'
rather than `info.tdep_info'.
* amd64-linux-tdep.c (amd64_linux_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* i386-tdep.c (i386_gdbarch_init): Likewise.
* mips-linux-tdep.c (mips_linux_init_abi): Likewise.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Likewise.
* ppc-linux-tdep.c (ppu2spu_sniffer): Use `info.id' rather than
`info.tdep_info'.
(ppc_linux_init_abi): Use `info.tdesc_data' rather than
`info.tdep_info'.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* spu-multiarch.c (spu_gdbarch): Use `info.id' rather than
`info.tdep_info'.
* spu-tdep.c (spu_gdbarch_init): Likewise.
* gdbarch.h: Regenerate.

Fix dwarf2_string_attr for -gsplit-dwarf

The dwarf2_string_attr did not allow DW_FORM_GNU_str_index as a form for
string types. This manifested as null strings in the namespace_name
lookup (replaced with "(anonymous namespace)") when debugging
Fission-compiled code.

gdb/ChangeLog:

* dwarf2read.c (dwarf2_string_attr): Allow DW_FORM_GNU_strp_alt.

Support different ld --hash-style in the ld testsuite

When ld is running with something other than --hash-style=sysv by
default, numerous tests need tweaking.  Most of the changes just add
--hash-style=sysv.  I didn't want to make --hash-style=sysv global as
that means --hash-style=gnu isn't well tested.

* testsuite/ld-alpha/alpha.exp: Add --hash-style=sysv to various
test's ld options.
* testsuite/ld-arm/arm-elf.exp: Likewise.
* testsuite/ld-elf/elf.exp: Likewise.
* testsuite/ld-elf/readelf.exp: Likewise.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
* testsuite/ld-i386/i386.exp: Likewise.
* testsuite/ld-ia64/ia64.exp: Likewise.
* testsuite/ld-m68k/m68k.exp: Likewise.
* testsuite/ld-metag/metag.exp: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Likewise.
* testsuite/ld-s390/s390.exp: Likewise.
* testsuite/ld-sh/sh-vxworks.exp: Likewise.
* testsuite/ld-shared/shared.exp: Likewise.
* testsuite/ld-sparc/sparc.exp: Likewise.
* testsuite/ld-tic6x/tic6x.exp: Likewise.
* testsuite/ld-vax-elf/vax-elf.exp: Likewise.
* testsuite/ld-x86-64/mpx.exp: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-xtensa/xtensa.exp: Likewise.

* testsuite/ld-elf/comm-data2.ld: Add .gnu.hash output section.
* testsuite/ld-elf/pr20828-v.ld: Likewise.
* testsuite/ld-elf/pr20828.ld: Likewise.
* testsuite/ld-elf/pr21233.ld: Likewise.
* testsuite/ld-elf/pr21384.ld: Likewise.
* testsuite/ld-elf/provide-hidden-1.ld: Likewise.
* testsuite/ld-elf/provide-hidden-2.ld: Likewise.
* testsuite/ld-elf/provide-hidden-s.ld: Likewise.
* testsuite/ld-scripts/cross1.t: Likewise.

* testsuite/ld-elf/stab.d: Adjust allowed section indices.

* testsuite/ld-i386/pie1.d: Don't match addresses.
* testsuite/ld-i386/plt-pic2.dd: Likewise.
* testsuite/ld-i386/pr19636-1d.d: Likewise.
* testsuite/ld-i386/pr19636-2c.d: Likewise.
* testsuite/ld-powerpc/elfv2so.d: Likewise.
* testsuite/ld-powerpc/tlsopt5.d: Likewise.
* testsuite/ld-powerpc/tlsopt5.wf: Likewise.
* testsuite/ld-powerpc/tlsopt5_32.d: Likewise.

* testsuite/ld-i386/pr19636-2b.d: Don't match _start.

* testsuite/ld-powerpc/ambiguousv1.d: Relax symbol count, index
and address match.
* testsuite/ld-powerpc/ambiguousv1b.d: Likewise.
* testsuite/ld-powerpc/ambiguousv2.d: Likewise.
* testsuite/ld-powerpc/ambiguousv2b.d: Likewise.

* testsuite/ld-aarch64/gc-plt-relocs.d: Run ld with --hash-style=sysv.
* testsuite/ld-aarch64/ifunc-1.d: Likewise.
* testsuite/ld-aarch64/ifunc-2.d: Likewise.
* testsuite/ld-aarch64/ifunc-21.d: Likewise.
* testsuite/ld-aarch64/relasz.d: Likewise.
* testsuite/ld-aarch64/tls-small-ld.d: Likewise.
* testsuite/ld-aarch64/tls-tiny-ld.d: Likewise.
* testsuite/ld-arc/tls_gd-01.d: Likewise.
* testsuite/ld-cris/libdso-10.d: Likewise.
* testsuite/ld-cris/libdso-2.d: Likewise.
* testsuite/ld-cris/pic-gc-72.d: Likewise.
* testsuite/ld-cris/pic-gc-73.d: Likewise.
* testsuite/ld-cris/tls-gd-1.d: Likewise.
* testsuite/ld-cris/tls-gd-1h.d: Likewise.
* testsuite/ld-cris/tls-gd-2.d: Likewise.
* testsuite/ld-cris/tls-gd-2h.d: Likewise.
* testsuite/ld-cris/tls-ie-10.d: Likewise.
* testsuite/ld-cris/tls-ie-11.d: Likewise.
* testsuite/ld-cris/tls-ie-8.d: Likewise.
* testsuite/ld-cris/tls-ie-9.d: Likewise.
* testsuite/ld-cris/tls-ld-4.d: Likewise.
* testsuite/ld-cris/tls-ld-5.d: Likewise.
* testsuite/ld-cris/tls-ld-6.d: Likewise.
* testsuite/ld-cris/tls-ld-7.d: Likewise.
* testsuite/ld-cris/tls-ldgd-14.d: Likewise.
* testsuite/ld-cris/tls-ldgd-15.d: Likewise.
* testsuite/ld-cris/tls-ldgdx-14.d: Likewise.
* testsuite/ld-cris/tls-ldgdx-15.d: Likewise.
* testsuite/ld-cris/tls-local-54.d: Likewise.
* testsuite/ld-cris/tls-local-60.d: Likewise.
* testsuite/ld-cris/tls-local-61.d: Likewise.
* testsuite/ld-cris/weakhiddso.d: Likewise.
* testsuite/ld-elf/linkinfo1a.d: Likewise.
* testsuite/ld-elf/linkinfo1b.d: Likewise.
* testsuite/ld-elf/pr19617a.d: Likewise.
* testsuite/ld-elfvsb/hidden2.d: Likewise.
* testsuite/ld-frv/fdpic-pie-6.d: Likewise.
* testsuite/ld-frv/fdpic-shared-2.d: Likewise.
* testsuite/ld-frv/fdpic-shared-5.d: Likewise.
* testsuite/ld-frv/fdpic-shared-6.d: Likewise.
* testsuite/ld-frv/fdpic-shared-8.d: Likewise.
* testsuite/ld-frv/fdpic-shared-local-2.d: Likewise.
* testsuite/ld-frv/fdpic-shared-local-8.d: Likewise.
* testsuite/ld-frv/tls-dynamic-2.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/pr20830.d: Likewise.
* testsuite/ld-ia64/merge1.d: Likewise.
* testsuite/ld-ia64/merge2.d: Likewise.
* testsuite/ld-ia64/merge3.d: Likewise.
* testsuite/ld-ia64/merge4.d: Likewise.
* testsuite/ld-ia64/merge5.d: Likewise.
* testsuite/ld-ifunc/ifunc-1-local-x86.d: Likewise.
* testsuite/ld-ifunc/ifunc-1-x86.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-i386-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-local-x86-64.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-x86-64-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-x86-64.d: Likewise.
* testsuite/ld-ifunc/ifunc-3a-x86.d: Likewise.
* testsuite/ld-ifunc/pr17154-i386-now.d: Likewise.
* testsuite/ld-ifunc/pr17154-i386.d: Likewise.
* testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise.
* testsuite/ld-ifunc/pr17154-x86-64.d: Likewise.
* testsuite/ld-m68k/got-1.d: Likewise.
* testsuite/ld-m68k/got-multigot-12-13-14-34-35-ok.d: Likewise.
* testsuite/ld-m68k/got-multigot-14-ok.d: Likewise.
* testsuite/ld-m68k/got-multigot-15-er.d: Likewise.
* testsuite/ld-m68k/got-negative-12-13-14-34-ok.d: Likewise.
* testsuite/ld-m68k/got-negative-12-13-14-35-er.d: Likewise.
* testsuite/ld-m68k/got-negative-14-ok.d: Likewise.
* testsuite/ld-m68k/got-negative-15-er.d: Likewise.
* testsuite/ld-m68k/got-single-12-ok.d: Likewise.
* testsuite/ld-m68k/got-single-13-er.d: Likewise.
* testsuite/ld-m68k/got-xgot-12-13-14-15-34-35-ok.d: Likewise.
* testsuite/ld-m68k/got-xgot-15-ok.d: Likewise.
* testsuite/ld-m68k/tls-gd-1.d: Likewise.
* testsuite/ld-m68k/tls-gd-2.d: Likewise.
* testsuite/ld-m68k/tls-gd-ie-1.d: Likewise.
* testsuite/ld-m68k/tls-ie-1.d: Likewise.
* testsuite/ld-m68k/tls-ld-1.d: Likewise.
* testsuite/ld-m68k/tls-ld-2.d: Likewise.
* testsuite/ld-sh/shared-2.d: Likewise.
* testsuite/ld-sh/tlsbin-2.d: Likewise.
* testsuite/ld-sh/tlspic-2.d: Likewise.
* testsuite/ld-x86-64/bnd-branch-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-1.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-2.d: Likewise.
* testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ilp32-4-nacl.d: Likewise.
* testsuite/ld-x86-64/ilp32-4.d: Likewise.
* testsuite/ld-x86-64/load1c-nacl.d: Likewise.
* testsuite/ld-x86-64/load1c.d: Likewise.
* testsuite/ld-x86-64/load1d-nacl.d: Likewise.
* testsuite/ld-x86-64/load1d.d: Likewise.
* testsuite/ld-x86-64/pie3-nacl.d: Likewise.
* testsuite/ld-x86-64/pie3.d: Likewise.
* testsuite/ld-x86-64/pr14207.d: Likewise.
* testsuite/ld-x86-64/pr19162.d: Likewise.
* testsuite/ld-x86-64/pr19636-2d-nacl.d: Likewise.
* testsuite/ld-x86-64/pr19636-2d.d: Likewise.
* testsuite/ld-x86-64/pr20253-1d.d: Likewise.
* testsuite/ld-x86-64/pr20253-1f.d: Likewise.
* testsuite/ld-x86-64/pr20253-1j.d: Likewise.
* testsuite/ld-x86-64/pr20253-1l.d: Likewise.
* testsuite/ld-x86-64/pr20830a-now.d: Likewise.
* testsuite/ld-x86-64/pr20830a.d: Likewise.
* testsuite/ld-x86-64/pr20830b-now.d: Likewise.
* testsuite/ld-x86-64/pr20830b.d: Likewise.
* testsuite/ld-x86-64/pr21038a-now.d: Likewise.
* testsuite/ld-x86-64/pr21038a.d: Likewise.
* testsuite/ld-x86-64/pr21038b-now.d: Likewise.
* testsuite/ld-x86-64/pr21038b.d: Likewise.
* testsuite/ld-x86-64/pr21038c-now.d: Likewise.
* testsuite/ld-x86-64/pr21038c.d: Likewise.

PR21910, segfault in common symbol override test when hash-style=gnu

PR 21910
* elflink.c (bfd_elf_final_link): Don't segfault when sections
needed to define various dynamic tags have been discarded.

remote-sim.c: Fix arg variables conflicts

The recent change introducing gdb_argv introduced some build failures in
remote-sim.c.

  /home/emaisin/src/binutils-gdb/gdb/remote-sim.c: In function 'void gdbsim_load(target_ops*, const char*, int)':
  /home/emaisin/src/binutils-gdb/gdb/remote-sim.c:573:22: error: conflicting declaration 'gdb_argv argv'
     gdb_argv argv (args);
                        ^
  /home/emaisin/src/binutils-gdb/gdb/remote-sim.c:565:10: note: previous declaration as 'char** argv'
     char **argv;
            ^~~~
  /home/emaisin/src/binutils-gdb/gdb/remote-sim.c: In function 'void gdbsim_open(const char*, int)':
  /home/emaisin/src/binutils-gdb/gdb/remote-sim.c:730:25: error: declaration of 'gdb_argv args' shadows a parameter
     gdb_argv args (arg_buf);

In gdbsim_load, the new gdb_argv object conflicts with old char **argv
variable.  I think the old variable should be removed.

In gdbsim_open, the new gdb_argv object conflicts with the args
parameter.  This patch renames it to argv.

Built-tested for a mips host.

gdb/ChangeLog:

* remote-sim.c (gdbsim_load): Remove char **argv local variable.
(gdbsim_open): Rename gdb_argv args object to argv.

Do not choose a non-ELF format input file to hold the linker created GOT sections.

PR 21884
* elf32-i386.c (elf_i386_link_setup_gnu_properties): If the dynobj
has not been set then use the bfd returned by
_bfd_elf_link_setup_gnu_properties.  If that is null then search
through all the input bfds selecting the first normal, ELF format
one.
* elf64-x86-64.c (elf_x86_64_link_setup_gnu_properties): Likewise.

Automatic date update in version.in

x86: Lookup __tls_get_addr or ___tls_get_addr once

Instead of checking if a symbol is __tls_get_addr or ___tls_get_addr,
we check if there is a reference to __tls_get_addr or ___tls_get_addr
before starting relocation check.

* elf32-i386.c (elf_i386_link_hash_entry): Change tls_get_addr
to 1 bit.
(elf_i386_link_hash_newfunc): Initialize tls_get_addr to 0.
(elf_i386_check_tls_transition): Check tls_get_addr directly.
(elf_i386_convert_load_reloc): Update tls_get_addr check.
(elf_i386_link_check_relocs): New function.
(bfd_elf32_bfd_link_check_relocs): New.
* elf64-x86-64.c (elf_x86_64_link_hash_entry): Change tls_get_addr
to 1 bit.
(elf_x86_64_link_hash_newfunc): Initialize tls_get_addr to 0.
(elf_x86_64_check_tls_transition): Check tls_get_addr directly.
(elf_x86_64_convert_load_reloc): Update tls_get_addr check.
(elf_x86_64_link_check_relocs): New function.
(bfd_elf64_bfd_link_check_relocs): New.
(bfd_elf32_bfd_link_check_relocs): Likewise.

Treat common symbol as undefined for --no-define-common

When --no-define-common is used to build shared library, treat common
symbol as undefined so that common symbols that are referenced from a
shared library to be assigned addresses only in the main program.  This
eliminates the unused duplicate space in the shared library, and also
prevents any possible confusion over resolving to the wrong duplicate
when there are many dynamic modules with specialized search paths for
runtime symbol resolution.

--no-define-common is only allowed when building a shared library.

bfd/

PR ld/21903:
* elflink.c (elf_link_add_object_symbols): Treat common symbol
as undefined for --no-define-common.

include/

PR ld/21903:
* bfdlink.h (bfd_link_info): Add inhibit_common_definition.

ld/

PR ld/21903:
* ld.h (command_line): Remove inhibit_common_definition.
* ldgram.y: Replace command_line.inhibit_common_definition with
link_info.inhibit_common_definition.
* ldlang.c (lang_common): Likewise.
* lexsup.c (parse_args): Likewise.
* ldmain.c (main): Only allow --no-define-common with -shared.
* testsuite/ld-elf/pr21903.s: New file.
* testsuite/ld-elf/pr21903a.d: Likewise.
* testsuite/ld-elf/pr21903b.d: Likewise.
* testsuite/ld-elf/pr21903c.d: Likewise.
* testsuite/ld-elf/pr21903d.d: Likewise.
* testsuite/ld-elf/pr21903e.d: Likewise.

Automatic date update in version.in

Use gdb::unique_xmalloc_ptr when calling tilde_expand

This patch changes most sites calling tilde_expand to use
gdb::unique_xmalloc_ptr, rather than a cleanup.  It also changes
scan_expression_with_cleanup to return a unique pointer, because the
patch was already touching code in that area.

Regression tested on the buildbot.

ChangeLog
2017-08-05  Tom Tromey  <tom@tromey.com>

* compile/compile-object-load.c (compile_object_load): Use
gdb::unique_xmalloc_ptr.
* cli/cli-dump.c (scan_filename): Rename from
scan_filename_with_cleanup.  Change return type.
(scan_expression): Rename from scan_expression_with_cleanup.
Change return type.
(dump_memory_to_file, dump_value_to_file, restore_command):
Use gdb::unique_xmalloc_ptr.  Update.
* cli/cli-cmds.c (find_and_open_script): Use
gdb::unique_xmalloc_ptr.
* tracefile-tfile.c (tfile_open): Use gdb::unique_xmalloc_ptr.
* symmisc.c (maintenance_print_symbols)
(maintenance_print_msymbols): Use gdb::unique_xmalloc_ptr.
* symfile.c (symfile_bfd_open, generic_load)
(add_symbol_file_command, remove_symbol_file_command): Use
gdb::unique_xmalloc_ptr.
* source.c (openp): Use gdb::unique_xmalloc_ptr.
* psymtab.c (maintenance_print_psymbols): Use
gdb::unique_xmalloc_ptr.
* corelow.c (core_open): Use gdb::unique_xmalloc_ptr.
* breakpoint.c (save_breakpoints): Use gdb::unique_xmalloc_ptr.
* solib.c (solib_map_sections): Use gdb::unique_xmalloc_ptr.
(reload_shared_libraries_1): Likewise.

Fix Rust test suite for 1.20 beta

I ran the gdb.rust tests against Rust 1.20 (beta) and saw a few
failures.  The failures all came because a particular item moved to a
different module.  Since the particular choice of module name isn't
important here, I simply widened the allowable results.

Tested locally against rustc 1.19, 1.20, and 1.21.

testsuite/ChangeLog
2017-08-05  Tom Tromey  <tom@tromey.com>

* gdb.rust/simple.exp: Allow String to appear in a different
namespace.

Remove cleanups from Rust parser

This removes the few remaining cleanups in the Rust language code.
The main difficulty here was that the earlier code allocated VEC heads
on an obstack.  The new code instead introduces an object that
allocates and maintains the storage for whatever vectors are needed
during the parse.

Regression tested on the buildbot.

ChangeLog
2017-08-05  Tom Tromey  <tom@tromey.com>

* rust-exp.y (rust_op_ptr, set_field): Remove typedefs.
(rust_op_vector, rust_set_vector): New typedefs.
(current_parser): New global.
(work_obstack): Change to pointer type.  Update all users.
(rust_ast, pstate): Remove globals.
(struct rust_parser): New.
(%union) <params, field_inits>: Change type.
(start, tuple_expr, unit_expr, struct_expr_list, literal)
(field_expr, expr_list, maybe_expr_list, type_list): Update.
(ast_call_ish, ast_path, ast_function_type, ast_tuple_type)
(convert_params_to_types, convert_params_to_expression): Change
type of "params".
(ast_string): Change type of "fields".
(rust_parse): Make a rust_parser.  Remove cleanups.
(rust_lex_tests): Make and install an auto_obstack.

Don't fail in elf32_hppa_set_gp

The base bfd_link_hash_table works fine here, the only thing to watch
out for is to only set elf_gp if the output is ELF.

bfd/
* elf32-hppa.c (elf32_hppa_set_gp): Don't require an
hppa_link_hash_table.
ld/
* testsuite/ld-unique/pr21529.d: Don't xfail hppa.

Automatic date update in version.in

Unbreak GDBserver build for x32

When I verify my target description changes, I build GDB and GDBserver for
x32, but it failed.

/../../binutils-gdb/gdb/gdbserver/linux-amd64-ipa.c
../../../binutils-gdb/gdb/gdbserver/linux-amd64-ipa.c: In function ‘const target_desc* get_ipa_tdesc(int)’:
../../../binutils-gdb/gdb/gdbserver/linux-amd64-ipa.c:184:10: error: ‘X86_TDESC_AVX512’ was not declared in this scope
     case X86_TDESC_AVX512:
          ^
../../../binutils-gdb/gdb/gdbserver/linux-amd64-ipa.c:185:14: error: ‘tdesc_x32_avx512_linux’ was not declared in this scope
       return tdesc_x32_avx512_linux;
              ^
../../../binutils-gdb/gdb/gdbserver/linux-amd64-ipa.c: In function ‘void initialize_low_tracepoint()’:
../../../binutils-gdb/gdb/gdbserver/linux-amd64-ipa.c:282:36: error: ‘init_registers_x32_avx512_linux’ was not declared in this scope
   init_registers_x32_avx512_linux ();
                                    ^

ipa_x32_linux_regobj use to be there, but removed by
22049425ce40324139be82d9a6ec518c46b65815 by mistake.

gdb/gdbserver:

2017-08-04  Yao Qi  <yao.qi@linaro.org>

* configure.srv (ipa_x32_linux_regobj): New.
* linux-amd64-ipa.c (get_ipa_tdesc): Use X86_TDESC_AVX_AVX512
instead of X86_TDESC_AVX512.
(initialize_low_tracepoint): Call
init_registers_x32_avx_avx512_linux.

Add namespace std to nullptr_t

This patch fixes the build failure for target i686-w64-mingw32,

In file included from ../../binutils-gdb/gdb/defs.h:786:0,
                 from ../../binutils-gdb/gdb/gdb.c:19:
../../binutils-gdb/gdb/utils.h:188:20: error: ‘nullptr_t’ has not been declared
   bool operator!= (nullptr_t)
                    ^
../../binutils-gdb/gdb/utils.h:193:20: error: ‘nullptr_t’ has not been declared
   bool operator== (nullptr_t)
                    ^

gdb:

2017-08-04  Yao Qi  <yao.qi@linaro.org>

* utils.h (gdb_argv): Add namespace std for nullptr_t.

Add a testcase for "ld -d"

"ld -d" assigns space to common symbols even if a relocatable output
file is specified (with '-r').

PR ld/21904
* testsuite/ld-elf/pr21904.d: New file.
* testsuite/ld-elf/pr21904.s: Likewise.

Add --no-relax option.

gold/
* options.h (General_options): Set a non-NULL second help string
argument for relax to allow --no-relax.

Automatic date update in version.in

Add myself as a write-after-approval GDB maintainer.

Remove make_cleanup_freeargv and gdb_buildargv

After the previous patches in this series, make_cleanup_freeargv and
gdb_buildargv are now unused and can be removed.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* utils.c (make_cleanup_freeargv, do_freeargv, gdb_buildargv):
Remove.
* utils.h (make_cleanup_freeargv, gdb_buildargv): Remove.

Use gdb_argv in Python

This changes one spot in the Python code to use gdb_argv.  This
removes the last cleanup from the Python layer.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* python/py-param.c (compute_enum_values): Use gdb_argv.

Introduce gdb_argv, a class wrapper for buildargv

This introduces gdb_argv, a class wrapping an "argv" pointer; that is,
a pointer to a NULL-terminated array of char*, where both the array
and each non-NULL element in the array are xmalloc'd.

This patch then changes most users of gdb_buildargv to use gdb_argv
instead.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* utils.h (struct gdb_argv_deleter): New.
(gdb_argv): New class.
* utils.c (gdb_argv::reset): New method.
* tracepoint.c (delete_trace_variable_command): Use gdb_argv.
* tracefile.c (tsave_command): Use gdb_argv.
* top.c (new_ui_command): Use gdb_argv.
* symmisc.c (maintenance_print_symbols)
(maintenance_print_msymbols, maintenance_expand_symtabs): Use gdb_argv.
* symfile.c (symbol_file_command, generic_load)
(remove_symbol_file_command): Use gdb_argv.
* stack.c (backtrace_command): Use gdb_argv.
* source.c (add_path, show_substitute_path_command)
(unset_substitute_path_command, set_substitute_path_command):
Use gdb_argv.
* skip.c (skip_command): Use gdb_argv.  Use gdb_buildargv.
* ser-mingw.c (pipe_windows_open): Use gdb_argv.
* remote.c (extended_remote_run, remote_put_command)
(remote_get_command, remote_delete_command): Use gdb_argv.
* remote-sim.c (gdbsim_load, gdbsim_create_inferior)
(gdbsim_open): Use gdb_argv.
* python/py-cmd.c (gdbpy_string_to_argv): Use gdb_argv.
* psymtab.c (maintenance_print_psymbols): Use gdb_argv.
* procfs.c (procfs_info_proc): Use gdb_argv.
* interps.c (interpreter_exec_cmd): Use gdb_argv.
* infrun.c (handle_command): Use gdb_argv.
* inferior.c (add_inferior_command, clone_inferior_command):
Use gdb_argv.
* guile/scm-string.c (gdbscm_string_to_argv): Use gdb_argv.
* exec.c (exec_file_command): Use gdb_argv.
* cli/cli-cmds.c (alias_command): Use gdb_argv.
* compile/compile.c (build_argc_argv): Use gdb_argv.

Remove a cleanup in Python

This removes cleanups from gdbpy_decode_line, in favor of a use of
unique_xmalloc_ptr.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* python/python.c (gdbpy_decode_line): Use unique_xmalloc_ptr.

Avoid some manual memory management in Python

This changes a few places in the Python code to avoid manual memory
management, in favor of letting std::string do the work.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* python/python.c (compute_python_string): Return std::string.
(gdbpy_eval_from_control_command): Update.
(do_start_initialization): Use std::string.
* python/py-varobj.c (py_varobj_iter_next): Use string_printf, not
xstrprintf.
* python/py-breakpoint.c (local_setattro): Use string_printf, not
xstrprintf.

Replace do_restore_instream_cleanup with scoped_restore

This changes the users of do_restore_instream_cleanup to use a
scoped_restore instead.  This patch is broken out because it warrants
some additional attention: in particular it's unclear to me whether
current_ui can change in the body of these functions -- but if it can,
then the cleanup would have modified a different UI's instream member.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* top.h (do_restore_instream_cleanup): Remove.
* top.c (do_restore_instream_cleanup): Remove.
(read_command_file): Use scoped_restore.
* cli/cli-script.c (execute_user_command): Use scoped_restore.

Use a scoped_restore for command_nest_depth

This changes a couple of places to use a scoped_restore when
manipulating command_nest_depth.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* cli/cli-script.c (execute_user_command)
(execute_control_command): Use scoped_restore.

Remove user_call_depth

This changes execute_user_command to remove user_call_depth, using the
size of user_args_stack instead.  This avoids a cleanup.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* cli/cli-script.c (do_restore_user_call_depth): Remove.
(execute_user_command): Remove user_call_depth; use
user_args_stack's size instead.

Remove in_user_command

While working on the next patch in this series, I found that the
global in_user_command is not used.  This patch removes it.  (I didn't
think to check Insight until submitting this series; and it's not very
convenient to do so, so if someone has it checked out and could look
at it, that would be nice.)

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* top.h (in_user_command): Remove.
* top.c (in_user_command): Remove.
* cli/cli-script.c (do_restore_user_call_depth)
(execute_user_command): Update.

Use containers to avoid cleanups

This patch introduces the use of various containers -- std::vector,
std::string, or gdb::byte_vector -- in several spots in gdb that were
using xmalloc and a cleanup.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* valops.c (search_struct_method): Use gdb::byte_vector.
* valarith.c (value_concat): Use std::vector.
* target.c (memory_xfer_partial): Use gdb::byte_vector.
(simple_search_memory): Likewise.
* printcmd.c (find_string_backward): Use gdb::byte_vector.
* mi/mi-main.c (mi_cmd_data_write_memory): Use gdb::byte_vector.
* gcore.c (gcore_copy_callback): Use gdb::byte_vector.
* elfread.c (elf_rel_plt_read): Use std::string.
* cp-valprint.c (cp_print_value): Use gdb::byte_vector.
* cli/cli-dump.c (restore_section_callback): Use
gdb::byte_vector.

Use unique_xmalloc_ptr in jit.c

This removes some cleanups from jit.c by using unique_xmalloc_ptr
instead.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* jit.c (jit_reader_load_command): Use unique_xmalloc_ptr.

Replace tui_restore_gdbout with scoped_restore

This patch replaces tui_restore_gdbout (a cleaup function) with a use
of scoped_restore.  This one is broken out into its own patch because
it might slightly change the behavior of gdb: it saves and restores
pagination_enabled, whereas the tui_restore_gdbout unconditionally set
pagination_enabled to 1; and I think this warrants closer review.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* tui/tui-regs.c (tui_restore_gdbout): Remove.
(tui_register_format): Use scoped_restore.

More uses of scoped_restore

There were a few more places in gdb that could easily use
scoped_restore, replacing some cleanups.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* reverse.c (exec_direction_default): Remove.
(exec_reverse_once): Use scoped_restore.
* remote.c (restore_remote_timeout): Remove.
(remote_flash_erase, remote_flash_write, remote_flash_done)
(readchar, remote_serial_write): Use scoped_restore.
* cli/cli-script.c (struct source_cleanup_lines_args)
(source_cleanup_lines): Remove.
(script_from_file): Use scoped_restore.
* cli/cli-cmds.c (source_verbose_cleanup): Remove.
(source_command): Use scoped_restore.

Remove make_cleanup_free_so

make_cleanup_free_so is used in a single spot.  This patch introduces
a unique pointer wrapper for struct so_list, and changes this spot to
use it.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* utils.h (make_cleanup_free_so): Remove.
* utils.c (do_free_so, make_cleanup_free_so): Remove.
* solist.h (struct so_deleter): New.
(so_list_up): New typedef.
* solib-svr4.c (svr4_read_so_list): Use so_list_up.

Remove make_cleanup_restore_current_language

This patch replaces make_cleanup_restore_current_language with an RAII
class that saves the current language, and restores it when the object
is destroyed.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* utils.h (make_cleanup_restore_current_language): Remove.
* utils.c (do_restore_current_language)
(make_cleanup_restore_current_language): Remove.
* parse.c (parse_exp_in_context_1)
(parse_expression_with_language): Use
scoped_restore_current_language.
* mi/mi-main.c (mi_cmd_execute): Use
scoped_restore_current_language.
* language.h (scoped_restore_current_language): New class.

Remove an unlink cleanup

compile/compile.c had its own cleanup to unlink a file.  This patch
replaces this cleanup with gdb::unlinker.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* compile/compile.c (cleanup_unlink_file): Remove.
(compile_to_object): Use gdb::unlinker.
(eval_compile_command): Likewise.

Remove make_cleanup_fclose

After the preceding patches, make_cleanup_fclose is no longer used, so
remove it.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* utils.h (make_cleanup_fclose): Remove.
* utils.c (do_fclose_cleanup, make_cleanup_fclose): Remove.

Change open_terminal_stream to return a gdb_file_up

This changes open_terminal_stream to return a gdb_file_up, eliminating
another use of make_cleanup_fclose.  Arguably perhaps new_ui should
take ownership of the files using a move, but there is at least one
spot where this isn't appropriate (or at least not currently done), so
I elected to use a more minimal approach.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* top.c (open_terminal_stream): Return gdb_file_up.
(new_ui_command): Update.

Use gdb_file_up in source.c

This changes some functions in source.c to use gdb_file_up.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* source.c (print_source_lines_base, forward_search_command)
(reverse_search_command): Use gdb_file_up.

Use gdb_file_up in fbsd-nat.c

This updates fbsd-nat.c to use gdb_file_up.  This removes a use of a
cleanup, and helps remove make_cleanup_fclose in a later patch.

I have no way to test this patch.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* fbsd-nat.c (fbsd_find_memory_regions): Update.

Change return type of find_and_open_script

This changes find_and_open_script to return a
gdb::optional<open_script>, where open_script is a new type
encapsulating the two return values.  The new type helps avoid
cleanups in the callers.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* cli/cli-cmds.c (find_and_open_script): Change return type.
Remove "streamp" and "full_path" parameters.
(source_script_with_search): Update.
* auto-load.c (source_script_file): Update.
* cli/cli-cmds.h (find_and_open_script): Change type.
(open_script): New struct.

Introduce and use gdb_file_up

This introduces gdb_file_up, a unique pointer holding a FILE*, and
then changes some code in gdb to use it.  In particular
gdb_fopen_cloexec now returns a gdb_file_up.  This allow removing some
cleanups.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* xml-support.c (xml_fetch_content_from_file): Update.
* ui-file.c (stdio_file::open): Update.
* tracefile-tfile.c (tfile_start): Update.
* remote.c (remote_file_put, remote_file_get): Update.
* nat/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_get_state, linux_proc_tid_get_name): Update.
* nat/linux-osdata.c (linux_common_core_of_thread): Update.
(command_from_pid, commandline_from_pid, linux_xfer_osdata_cpus)
(print_sockets, linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Update.
* nat/linux-btrace.c (linux_determine_kernel_start): Update.
* linux-nat.c (linux_proc_pending_signals): Update.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_file_up.
(file_closer): Remove.
* compile/compile.c (compile_to_object): Update.
* common/filestuff.h (struct gdb_file_deleter): New.
(gdb_file_up): New typedef.
(gdb_fopen_cloexec): Change return type.
* common/filestuff.c (gdb_fopen_cloexec): Return gdb_file_up.
* cli/cli-dump.c (fopen_with_cleanup): Remove.
(dump_binary_file, restore_binary_file): Update.
* auto-load.c (auto_load_objfile_script_1): Update.

Introduce and use ui_out_emit_table

This introduces ui_out_emit_table, similar to the other existing
ui_out RAII classes, and then uses it in a number of places.  This
replaces some cleanups.

ChangeLog
2017-08-03  Tom Tromey  <tom@tromey.com>

* tracepoint.c (tvariables_info_1): Use ui_out_emit_table.
(info_static_tracepoint_markers_command): Likewise.
* solib.c (info_sharedlibrary_command): Use ui_out_emit_table.
* skip.c (skip_info): Use ui_out_emit_table.
* progspace.c (print_program_space): Use ui_out_emit_table.
* osdata.c (info_osdata): Use ui_out_emit_table.
* mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions): Use
ui_out_emit_table.
* linux-thread-db.c (info_auto_load_libthread_db): Use
ui_out_emit_table.
* inferior.c (print_inferior): Use ui_out_emit_table.
* gdb_bfd.c (maintenance_info_bfds): Use ui_out_emit_table.
* breakpoint.c (breakpoint_1): Use ui_out_emit_table.
* auto-load.c (auto_load_info_scripts): Use ui_out_emit_table.
* ada-tasks.c (print_ada_task_info): Use ui_out_emit_table.
* ui-out.h (class ui_out_emit_table): New.

Add more targets to the list of architectures not supporting format changing during linking.  Fix seg-faults triggered when this is attempted.

PR ld/21884
* testsuite/ld-elf/pr21884.d: Add AVR, HPPA, IA64, M68HC1x and
SCORE to list of targets not supporting file format changes during
linking.
* testsuite/ld-unique/pr21529.d: Likewise.
* emultempl/avrelf.em (_before_allocation): Skip for non-ELF
output formats.
(avr_elf_create_output_section_statements): Fail if the output
format is not ELF.
(avr_finish): Do not access the ELF header in non-ELF format
output bfds.
* emultempl/m68hc1xelf.em (_before_allocation): Skip for non-ELF
output formats.
(m68hc11elf_create_output_section_statements): Fail if the putput
format is not ELF.
(m68hc11elf_after_allocation): Skip for non-ELF output formats.

ELF checks for orphan placement

The loop checking for previous orphan placement should run even when
the output is non-ELF.

PR ld/21884
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Revert
last change.  Rename iself to elfinput.  Expand comments.  Condition
ELF checks on having both input and output ELF files.  Extract..
(elf_orphan_compatible): ..this new function.

Automatic date update in version.in

MIPS: Factor out FPU type naming in `gdbarch' debug

Replace chains of conditional expressions used in target-dependent MIPS
`gdbarch' debug output to get a textual name of the FPU type with calls
to a helper decoder function, improving code readability.  No functional
change.

gdb/
* mips-tdep.c (mips_fpu_type_str): New function.
(mips_dump_tdep): Call it.

Check ELF section header only for ELF output

When placing an orphan input section, check ELF section header only for
ELF output.

PR ld/21884
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Check
ELF section header only for ELF output.
* testsuite/ld-elf/pr21884.d: New test.
* testsuite/ld-elf/pr21884.t: Likewise.
* testsuite/ld-elf/pr21884a.s: Likewise.
* testsuite/ld-elf/pr21884b.s: Likewise.

Revert the last change to emultempl/elf32.em

It will be replaced by a different fix.

* emultempl/elf32.em (_place_orphan): Revert the last change.

Add support for creating archives of slim-LTO modules using MRi script commands.

PR 21702
* arsup.c (ar_addmod): Add plugin support for the MRI ADDMOD
command.

Fix assertion failure for xtensa linker.

* emultempl/xtensaelf.em (xtensa_wild_group_interleave_callback):
Only check for by_name sorting.

Fix seg-fault when trying to place non-ELF orphan sections.

PR 21884
* emultempl/elf32.em (_place_orphan): Skip non-ELF binaries when
looking for sections to merge.

Fix potential illegal memory access in Xtensa port.

* xtensa-isa.c (xtensa_isa_init): Don't update lookup table
entries for sysregs with negative indices.

Fix gas and binutils testsuite failures for am33_2.0-linux target.

gas * testsuite/gas/all/gas.exp: Add am33 to the skip lists of tests
passed over by the mn10300 target.
* testsuite/gas/elf/elf.exp: Likewise.
* testsuite/gas/elf/dwarf2-11.d: Correct skip of am33 target.
* testsuite/gas/elf/dwarf2-12.d: Likewise.
* testsuite/gas/elf/dwarf2-13.d: Likewise.
* testsuite/gas/elf/dwarf2-14.d: Likewise.
* testsuite/gas/elf/dwarf2-15.d: Likewise.
* testsuite/gas/elf/dwarf2-16.d: Likewise.
* testsuite/gas/elf/dwarf2-17.d: Likewise.
* testsuite/gas/elf/dwarf2-18.d: Likewise.
* testsuite/gas/elf/dwarf2-5.d: Likewise.
* testsuite/gas/elf/dwarf2-6.d: Likewise.
* testsuite/gas/elf/dwarf2-7.d: Likewise.

binutils * testsuite/binutils-all/objdump.exp (cpus_expected): Add am33-2.

Teach readelf about IA64 MSB relocs.

* readelf.c (is_32bit_abs_reloc): Add R_IA64_SECREL32MSB and
R_IA64_DIR32MSB.
(is_64bit_abs_reloc): Add R_IA64_DIR64MSB.
(is_64bit_pcrel_reloc): Add R_IA64_PCREL64MSB.

Automatic date update in version.in

MIPS: Consistently use MIPS_FPU_TYPE for `gdbarch' member

Complement commit 74ed0bb4148e ("Replace current_gdbarch in *mips*"),
<https://sourceware.org/ml/gdb-patches/2008-06/msg00490.html>, and
consistently use the MIPS_FPU_TYPE macro to access the `->mips_fpu_type'
target-dependent `gdbarch' member.  No functional change.

gdb/
* mips-tdep.c (mips_gdbarch_init): Use MIPS_FPU_TYPE to access
`->mips_fpu_type'.

S/390: Fix claimfile failures

This fixes a segfault when trying to access the local_plt field in the
s390 specific elf data althoug the underlaying object is a generic elf
object.

This fixes the following testsuite failures:

< FAIL: plugin claimfile replace symbol with source
< FAIL: plugin claimfile resolve symbol with source
< FAIL: plugin claimfile replace file with source
< FAIL: plugin set symbol visibility with source
< FAIL: plugin ignore lib with source
< FAIL: plugin claimfile replace lib with source
< FAIL: plugin 2 with source lib
< FAIL: load plugin 2 with source
< FAIL: plugin 3 with source lib
< FAIL: load plugin 3 with source

bfd/ChangeLog:

2017-08-01  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

* elf32-s390.c (elf_s390_finish_dynamic_sections): Skip if it
isn't the S/390 specific elf data.
* elf64-s390.c (elf_s390_finish_dynamic_sections): Likewise.

x86: Update segment register check in Intel syntax

https://sourceware.org/ml/binutils/2009-04/msg00223.html

introduced a new Intel syntax parser which accepts

mov eax, fs:gs:[eax]

It ignores anything between ':'s after fs and treats

mov eax, DWORD PTR fs:foobar:16
mov eax, DWORD PTR fs:foobar:barfoo:16
mov eax, DWORD PTR fs:ds:16
mov eax, DWORD PTR fs:ds:cs:16

as

mov eax, DWORD PTR fs:16

This patch updates segment register check and only allows a single ':'.

PR gas/21874
* config/tc-i386-intel.c (i386_intel_operand): Update segment
register check.
* testsuite/gas/i386/intelok.s: Replace "fs:gs:[eax]" with
"fs:[eax]".
* testsuite/gas/i386/inval-seg.s: Add tests for invalid segment
register.
* testsuite/gas/i386/x86-64-inval-seg.s: Likewise.
* testsuite/gas/i386/inval-seg.l: Updated.
* testsuite/gas/i386/x86-64-inval-seg.l: Likewise.

Updated Swedish translation for the binutils sub-directory.

* po/sv.po: Updated Swedish translation.

[GOLD] PowerPC recreate eh_frame for stubs on each relax pass

There is a very small but non-zero probability that a stub group
contains stubs on one relax pass, but does not on the next.  In that
case we would get an FDE covering a zero length address range.
(Actually, it's even worse.  Alignment padding for stubs can mean the
address for the non-existent stubs is past the end of the original
section to which stubs are attached, and due to the way
do_plt_fde_location calculates the length we can get a negative
length.)  Fixing this properly requires removing the FDE.

Also, I have been implementing the __tls_get_addr_opt support for
gold, and that stub needs something other than the default FDE.  The
necessary FDE will depend on the offset to the __tls_get_addr_opt
stub, which of course can change during relaxation.  That means at the
very least, rewriting the FDE on each pass, possibly changing the FDE
size.  I think that is better done by completely recreating PLT
eh_frame FDEs.

* ehframe.cc (Fde::operator==): New.
(Cie::remove_fde, Eh_frame::remove_ehframe_for_plt): New.
* ehframe.h (Fde::operator==): Declare.
(Cie::remove_fde, Eh_frame::remove_ehframe_for_plt): Likewise.
* layout.cc (Layout::remove_eh_frame_for_plt): New.
* layout.h (Layout::remove_eh_frame_for_plt): Declare.
* powerpc.cc (Target_powerpc::do_relax): Remove old eh_frame FDEs.
(Stub_table::add_eh_frame): Delete eh_frame_added_ condition.
Don't add eh_frame for empty stub section.
(Stub_table::remove_eh_frame): New.

Automatic date update in version.in

Update myself in MAINTAINERS

Fix bb instructions with double-word condition on hppa.

Improve handling of ADD and SUB relocations on the RISCV target.

* elfxx-riscv.c (riscv_elf_add_sub_reloc): New function.
* (howto_table) [R_RISCV_ADD8]: Use riscv_elf_add_sub_reloc.
[R_RISCV_ADD16]: Likewise.
[R_RISCV_ADD32]: Likewise.
[R_RISCV_ADD64]: Likewise.
[R_RISCV_SUB6]: Likewise.
[R_RISCV_SUB8]: Likewise.
[R_RISCV_SUB16]: Likewise.
[R_RISCV_SUB32]: Likewise.
[R_RISCV_SUB64]: Likewise.

Fix compile time error when using ansidecl.h with an old version of GCC.

PR 21850
* ansidecl.h (OVERRIDE): Protect check of __cplusplus value with
#idef __cplusplus.

Update ChangeLog (missed that in my previous commit)

gdb/
        * ChangeLog: Add previous commit entry

Change-Id: Ic4f07cca66126e73340f032f19a2d5029bf0d40a

[GOLD] PowerPC --no-tls-optimize

This adds a --no-tls-optimize option for people who want to keep
__tls_get_addr calls in an executable rather than optimizing such code
sequences to IE/LE.

Also tidy some formatting errors, rename a variable to better reflect
its use, and tweak two functions that create pairs of GOT entries to
first check whether the GOT entry already exists before potentially
inserting the header via reserve(2).  Without the check it is possible
to waste one GOT entry.

* options.h (no_tls_optimize): New powerpc option.
* powerpc.cc (Target_powerpc::abiversion, set_abiversion): Formatting.
(Target_powerpc::stk_toc): Formatting, fix comment.
(Target_powerpc::Track_tls::tls_get_addr_state): Rename from
tls_get_addr.
(Target_powerpc::optimize_tls_gd, optimize_tls_ld, optimize_tls_ie):
Return TLSOPT_NONE when !tls_optimize.
(Target_powerpc::add_global_pair_with_rel): Check
for existing reloc before reserving.
(Target_powerpc::add_local_tls_pair): Likewise.

Fix compiling zlib using x86_64-musl.

PR 21861
* winduni.c (codepages): Use cp1252 for codepage 0.

Fix documentation about rot agent expression bytecode

The rot agent expression bytecode rotates the three items on the top of
the stack.  It is not clear which way the rotation is.  However, the
documentation currently shows this as the effect of the instructions:

   a b c => c b a

which doesn't make sense, since the value b doesn't move.  The two
valid possibilities I see are

  a b c => b c a
  a b c => c a b

depending on which way you rotate.

When looking at the gdbserver code, the top of the stack becomes the
third item, and the next-to-top item becomes the top.  So the second
form would be the right one, since in this notation the top of the stack
is the rightmost element:

  a b c => c a b

I adjusted the symbolic description and added a bit of text to make it
more obvious.

gdb/doc/ChangeLog:

* agentexpr.texi (rot): Fix symbolic description, improve
textual description.

darwin: handle recent version of dyld

gdb/
        * solib-darwin.c (DYLD_VERSION_MAX): Increase value.

Change-Id: I45da25f46b3e452d44993b122a994c818d00020b

PR 21847, PowerPC64 --plt-localentry again

This makes ld warn about --plt-localentry if a version of glibc
without the necessary ld.so checks is detected, and revises the
documentation.

bfd/
* elf64-ppc.c (ppc64_elf_tls_setup): Warn on --plt-localentry
without ld.so checks.
gold/
* powerpc.cc (Target_powerpc::scan_relocs): Warn on --plt-localentry
without ld.so checks.
ld/
* ld.texinfo (plt-localentry): Revise.

Automatic date update in version.in

Automatic date update in version.in

PR 21847, Don't default PowerPC64 to --plt-localentry

The big comment in ppc64_elf_tls_setup says why.  I've also added some
code to the bfd linker that catches the -lpthread -lc symbol
differences and disable generation of optimized call stubs even when
--plt-localentry is activated.  Gold doesn't yet have that.

PR 21847
bfd/
* elf64-ppc.c (struct ppc_link_hash_entry): Add non_zero_localentry.
(ppc64_elf_merge_symbol): Set non_zero_localentry.
(is_elfv2_localentry0): Test non_zero_localentry.
(ppc64_elf_tls_setup): Default to --no-plt-localentry.
gold/
* powerpc.cc (Target_powerpc::scan_relocs): Default to
--no-plt-localentry.
ld/
* ld.texinfo (plt-localentry): Document.

Automatic date update in version.in

gold: Add put_ch_reserved to 64-bit Chdr_write

The 64-bit ELF compression header has a reserved field.  It should be
cleared to avoid random bits in it.

elfcpp/

PR gold/21857
* elfcpp.h (Chdr_write): Add put_ch_reserved.
(Chdr_write<64, true>::put_ch_reserved): New.
(Chdr_write<64, false>::put_ch_reserved): Likewise.

gold/

PR gold/21857
* compressed_output.cc (Output_compressed_section::set_final_data_size):
Call put_ch_reserved to clear the reserved field for 64-bit ELF.

Add missing changelog

S/390: Fix segfault when linking -shared -nostartfiles

Regression-tested on s390x.

bfd/ChangeLog:

2017-07-28  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

* elf32-s390.c (elf_s390_finish_dynamic_sections): Add NULL
pointer check for htab->elf.irelplt.
* elf64-s390.c (elf_s390_finish_dynamic_sections): Likewise.

Make some improvements to how SORT_* specifiers and EXCLUDE_FILE specifiers are handled in the linker script grammar.

* ldgram.y (ldgram_had_keep): Make static.
(ldgram_vers_current_lang): Likewise.
(filename_spec): New rule.
(input_section_spec_no_keep): Use filename_spec.
(wildcard_maybe_exclude): New rule.
(wildcard_spec): Rename to...
(section_name_spec): ...this.
(section_NAME_list): Rename to...
(section_name_list): ...this.
(section_name_spec): Simplifiy and use wildcard_maybe_exclude.
* ldlang.c (placed_commons): Delete.
(lang_add_wild): No longer set placed_commons.
(print_wild_statement): Use full names for SORT specifiers.
* testsuite/ld-scripts/align.exp: Run new tests.
* testsuite/ld-scripts/align3.d: New file.
* testsuite/ld-scripts/align3.t: New file.
* testsuite/ld-scripts/align4.d: New file.
* testsuite/ld-scripts/align4.t: New file.
* testsuite/ld-scripts/align5.d: New file.
* testsuite/ld-scripts/align5.t: New file.
* testsuite/ld-scripts/exclude-file-5.d: New file.
* testsuite/ld-scripts/exclude-file-5.map: New file.
* testsuite/ld-scripts/exclude-file-5.t: New file.
* testsuite/ld-scripts/exclude-file-6.d: New file.
* testsuite/ld-scripts/exclude-file-6.map: New file.
* testsuite/ld-scripts/exclude-file-6.t: New file.
* NEWS: Mention the changes.

Fix problems parsing RISCV architecture extenstions in the assembler.

* config/tc-riscv.c (riscv_set_arch): Handle the Q subset like
all other subsets.
Obviate use-after-free.

Automatic date update in version.in

Add myself as a write-after-approval GDB maintainer.

gdb/Changelog:

2017-07-27  Xavier Roirand  <roirand@adacore.com>

        * MAINTAINERS (Write After Approval): Add Xavier Roirand.

Change-Id: Iee1dae7597da8f2c8c3098c14649ff400a81a388

Move AVR .promemx.* sections into higher memory.

PR ld/21849
* scripttempl/avr.sc: Split .progmemx.* from .progmem.* and locate
former at a higher address.

Fix address violation issues encountered when parsing corrupt binaries.

PR 21840
* mach-o.c (bfd_mach_o_read_symtab_strtab): Fail if the symtab
size is -1.
* nlmcode.h (nlm_swap_auxiliary_headers_in): Replace assertion
with error return.
* section.c (bfd_make_section_with_flags): Fail if the name or bfd
are NULL.
* vms-alpha.c (bfd_make_section_with_flags): Correct computation
of end pointer.
(evax_bfd_print_emh): Check for invalid string lengths.

Automatic date update in version.in

Gold: Fix mips.cc for GCC 4.2

GCC 4.2 fails to compile "(uint64_t) 0x800080008000" with

error: integer constant is too large for ‘long’ type

This patch adds "llu" suffix to 0x800080008000 for GCC 4.2.

* mips.cc (Mips_relocate_functions): Add "llu" suffix to
0x800080008000.

Add "maint check xml-descriptions" to test builtin xml target descriptions

Now, GDB is able to dynamically create i386-linux target descriptions
from features, instead of using pre-generated target descriptions.  These
pre-generated target descriptions are no longer used by GDB (note that
they are still used by GDBserver).

This patch add a new maint command "maint check xml-descriptions" to test
dynamically generated tdesc are identical to these generated from xml files.

gdb:

2017-07-26  Yao Qi  <yao.qi@linaro.org>

* cli/cli-cmds.c (maintenancechecklist): New variable.
* gdbcmd.h (maintenancechecklist): Declare it.
* i386-linux-tdep.c (_initialize_i386_linux_tdep) [GDB_SELF_TEST]:
Call i386_linux_read_description with different masks.
* maint.c (maintenance_check_command): New function.
(_initialize_maint_cmds): Call add_prefix_cmd.
* target-descriptions.c (tdesc_reg): override operator != and ==.
(tdesc_type): Likewise.
(tdesc_feature): Likewise.
(target_desc): Likewise.
[GDB_SELF_TEST] (selftests::record_xml_tdesc): New function.
(maintenance_check_xml_descriptions): New function.
(_initialize_target_descriptions) Add command "xml-descriptions".
* target-descriptions.h (selftests::record_xml_tdesc): Declare.

gdb/testsuite:

2017-07-26  Yao Qi  <yao.qi@linaro.org>

* gdb.gdb/unittest.exp: Invoke command
"maintenance check xml-descriptions".

gdb/doc:

2017-07-26  Yao Qi  <yao.qi@linaro.org>

* gdb.texinfo (Maintenance Commands): Document command
"maint check xml-descriptions".

Lazily and dynamically create i386-linux target descriptions

Instead of using pre-generated target descriptions, this patch
changes GDB to lazily and dynamically create target descriptions
according to the target hardware capability (xcr0 in i386).
This support any combination of target features.

Some reg in target description has "regnum" attribute, so its register
number is got from the attribute value instead from sequential allocation.

  <reg name="xmm0" bitsize="128" type="vec128" regnum="32"/>

when target description is created, it should match the regnum, so this
patch adds a new field m_next_regnum to track it, if attribute number is
greater than the m_next_regnum, print the code to set register number
explicitly.

gdb:

2017-07-26  Yao Qi  <yao.qi@linaro.org>

* i386-linux-tdep.c: Don't include features/i386/i386-*linux.c.
Include features/i386/32bit-*.c.
(i386_linux_read_description): Generate target description if it
doesn't exist.
(_initialize_i386_linux_tdep): Don't call _initialize_tdesc_i386
functions.
* features/i386/32bit-linux.c: Re-generated.
* features/i386/32bit-sse.c: Likewise.
* target-descriptions.c (print_c_feature::visit): Print code to
set register number if needed.
(print_c_feature) <m_next_regnum>: New field.

Generate c for feature instead of tdesc

This patch changes Makefile and command "maint print c-files" so
that GDB can print c files for features instead target description.
Previously, we feed GDB a target description xml file, which generate
c files including multiple features.

With this patch, in Makefile, we wrap each feature xml file, and
create a temp target description which include only one feature.
Then, adjust the target description printer for them, and print
a c function for each given feature, so that we can use these
c functions later to create target description in a flexible way.

gdb:

2017-07-26  Yao Qi  <yao.qi@linaro.org>

* features/Makefile (CFILES): Rename with TDESC_CFILES.
(FEATURE_XMLFILES): New.
(FEATURE_CFILES): New.
New rules.
(clean-cfiles): Remove generated c files.
* features/i386/32bit-avx.c: Generated.
  * features/i386/32bit-avx512.c: Generated.
  * features/i386/32bit-core.c: Generated.
  * features/i386/32bit-linux.c: Generated.
  * features/i386/32bit-mpx.c: Generated.
  * features/i386/32bit-pkeys.c: Generated.
  * features/i386/32bit-sse.c: Generated.
  * target-descriptions.c: Include algorithm.
(tdesc_element_visitor): Add method visit_end.
(print_c_tdesc): Implement visit_end.
(print_c_tdesc:: m_filename_after_features): Move it to
protected.
(print_c_feature): New class.
(maint_print_c_tdesc_cmd): Use print_c_feature if XML file
name starts with "i386/32bit-".

Use visitor pattern for "maint print c-tdesc"

Target description can be modeled as a tree, the target description
is the root node, features are children nodes, registers and types are
grand-children nodes.  So command "maint print c-tdesc" in effect
traverse/visit each node, and print them in c.  This can be
implemented by visitor pattern, this is the first reason.  Secondly,
I want to this command prints c files in a different way for some
specific xml files, but still print c files the same way for the rest
of xml files.  Third, I even want to print xml files from target
descriptions, so that GDBserver can use it to reply GDB's query
qXfer:features:read:target.xml.

gdb:

2017-07-26  Yao Qi  <yao.qi@linaro.org>

* target-descriptions.c (tdesc_element_visitor): New class.
(tdesc_element): New class.
(tdesc_reg): Inherit from tdesc_element.
(tdesc_reg::accept): New function.
(tdesc_type): Inherit from tdesc_element.
(tdesc_type::accept): New function.
(tdesc_feature): Inherit from tdesc_element.
(tdesc_feature::accept): New function.
(target_desc): Inherit from tdesc_element.
(target_desc::target_desc): New.
(target_desc::~target_desc): New.
(target_desc::accept): New.
(allocate_target_description): Use new.
(free_target_description): Use delete.
(print_c_tdesc): New class.
(maint_print_c_tdesc_cmd): Adjust.

* features/aarch64.c: Re-generated.
* features/arc-arcompact.c: Re-generated.
* features/arc-v2.c: Re-generated.
* features/arm/arm-with-iwmmxt.c: Re-generated.
* features/arm/arm-with-m.c: Re-generated.
* features/arm/arm-with-m-fpa-layout.c: Re-generated.
* features/arm/arm-with-m-vfp-d16.c: Re-generated.
* features/arm/arm-with-neon.c: Re-generated.
* features/arm/arm-with-vfpv2.c: Re-generated.
* features/arm/arm-with-vfpv3.c: Re-generated.
* features/i386/amd64-avx-avx512.c: Re-generated.
* features/i386/amd64-avx-avx512-linux.c: Re-generated.
* features/i386/amd64-avx.c: Re-generated.
* features/i386/amd64-avx-linux.c: Re-generated.
* features/i386/amd64-avx-mpx-avx512-pku.c: Re-generated.
* features/i386/amd64-avx-mpx-avx512-pku-linux.c: Re-generated.
* features/i386/amd64-avx-mpx.c: Re-generated.
* features/i386/amd64-avx-mpx-linux.c: Re-generated.
* features/i386/amd64.c: Re-generated.
* features/i386/amd64-linux.c: Re-generated.
* features/i386/amd64-mpx.c: Re-generated.
* features/i386/amd64-mpx-linux.c: Re-generated.
* features/i386/i386-avx-avx512.c: Re-generated.
* features/i386/i386-avx-avx512-linux.c: Re-generated.
* features/i386/i386-avx.c: Re-generated.
* features/i386/i386-avx-linux.c: Re-generated.
* features/i386/i386-avx-mpx-avx512-pku.c: Re-generated.
* features/i386/i386-avx-mpx-avx512-pku-linux.c: Re-generated.
* features/i386/i386-avx-mpx.c: Re-generated.
* features/i386/i386-avx-mpx-linux.c: Re-generated.
* features/i386/i386.c: Re-generated.
* features/i386/i386-linux.c: Re-generated.
* features/i386/i386-mmx.c: Re-generated.
* features/i386/i386-mmx-linux.c: Re-generated.
* features/i386/i386-mpx.c: Re-generated.
* features/i386/i386-mpx-linux.c: Re-generated.
* features/i386/x32-avx-avx512.c: Re-generated.
* features/i386/x32-avx-avx512-linux.c: Re-generated.
* features/i386/x32-avx.c: Re-generated.
* features/i386/x32-avx-linux.c: Re-generated.
* features/i386/x32.c: Re-generated.
* features/i386/x32-linux.c: Re-generated.
* features/microblaze.c: Re-generated.
* features/microblaze-with-stack-protect.c: Re-generated.
* features/mips64-dsp-linux.c: Re-generated.
* features/mips64-linux.c: Re-generated.
* features/mips-dsp-linux.c: Re-generated.
* features/mips-linux.c: Re-generated.
* features/nds32.c: Re-generated.
* features/nios2.c: Re-generated.
* features/nios2-linux.c: Re-generated.
* features/rs6000/powerpc-32.c: Re-generated.
* features/rs6000/powerpc-32l.c: Re-generated.
* features/rs6000/powerpc-403.c: Re-generated.
* features/rs6000/powerpc-403gc.c : Re-generated.
* features/rs6000/powerpc-405.c: Re-generated.
* features/rs6000/powerpc-505.c: Re-generated.
* features/rs6000/powerpc-601.c: Re-generated.
* features/rs6000/powerpc-602.c: Re-generated.
* features/rs6000/powerpc-603.c: Re-generated.
* features/rs6000/powerpc-604.c: Re-generated.
* features/rs6000/powerpc-64.c: Re-generated.
* features/rs6000/powerpc-64l.c: Re-generated.
* features/rs6000/powerpc-7400.c: Re-generated.
* features/rs6000/powerpc-750.c: Re-generated.
* features/rs6000/powerpc-860.c: Re-generated.
* features/rs6000/powerpc-altivec32.c: Re-generated.
* features/rs6000/powerpc-altivec32l.c: Re-generated.
* features/rs6000/powerpc-altivec64.c: Re-generated.
* features/rs6000/powerpc-altivec64l.c: Re-generated.
* features/rs6000/powerpc-cell32l.c: Re-generated.
* features/rs6000/powerpc-cell64l.c: Re-generated.
* features/rs6000/powerpc-e500.c: Re-generated.
* features/rs6000/powerpc-e500l.c: Re-generated.
* features/rs6000/powerpc-isa205-32l.c: Re-generated.
* features/rs6000/powerpc-isa205-64l.c: Re-generated.
* features/rs6000/powerpc-isa205-altivec32l.c: Re-generated.
* features/rs6000/powerpc-isa205-altivec64l.c: Re-generated.
* features/rs6000/powerpc-isa205-vsx32l.c: Re-generated.
* features/rs6000/powerpc-isa205-vsx64l.c: Re-generated.
* features/rs6000/powerpc-vsx32.c: Re-generated.
* features/rs6000/powerpc-vsx32l.c: Re-generated.
* features/rs6000/powerpc-vsx64.c: Re-generated.
* features/rs6000/powerpc-vsx64l.c: Re-generated.
* features/rs6000/rs6000.c: Re-generated.
* features/s390-linux32.c: Re-generated.
* features/s390-linux32v1.c: Re-generated.
* features/s390-linux32v2.c: Re-generated.
* features/s390-linux64.c: Re-generated.
* features/s390-linux64v1.c: Re-generated.
* features/s390-linux64v2.c: Re-generated.
* features/s390-te-linux64.c: Re-generated.
* features/s390-tevx-linux64.c: Re-generated.
* features/s390-vx-linux64.c: Re-generated.
* features/s390x-linux64.c: Re-generated.
* features/s390x-linux64v1.c: Re-generated.
* features/s390x-linux64v2.c: Re-generated.
* features/s390x-te-linux64.c: Re-generated.
* features/s390x-tevx-linux64.c: Re-generated.
* features/s390x-vx-linux64.c: Re-generated.
* features/sparc/sparc32-solaris.c: Re-generated.
* features/sparc/sparc64-solaris.c: Re-generated.
* features/tic6x-c62x.c: Re-generated.
* features/tic6x-c62x-linux.c: Re-generated.
* features/tic6x-c64x.c: Re-generated.
* features/tic6x-c64x-linux.c: Re-generated.
* features/tic6x-c64xp.c: Re-generated.
* features/tic6x-c64xp-linux.c: Re-generated.

Centralize i386 linux target descriptions

This patch moves all the tdesc_i386*_linux target descriptions to a
function i386_linux_read_description, which returns the right target
description according to xcr0.  This also remove the duplication in
getting target descriptions in corefile and native target.

gdb:

2017-07-26  Yao Qi  <yao.qi@linaro.org>

* i386-linux-tdep.c (i386_linux_read_description): New function.
(i386_linux_core_read_description): Call
i386_linux_read_description.
* i386-linux-tdep.h (i386_linux_read_description): Declare.
(tdesc_i386_linux, tdesc_i386_mmx_linux): Remove declarations.
(tdesc_i386_avx_linux, tdesc_i386_mpx_linux): Likewise
(tdesc_i386_avx_mpx_linux, tdesc_i386_avx_avx512_linux): Likewise.
(tdesc_i386_avx_mpx_avx512_pku_linux): Likewise.
* x86-linux-nat.c (x86_linux_read_description): Call
i386_linux_read_description.

Add optional argument to command "maint prints c-tdesc"

Nowadays, we need two steps to print c files for xml target description,
that is, 1) read xml target description in, update the current tdesc,
2) visit the current tdesc, print the c file.  It is unnecessary to
involve in current tdesc, and some validations in each gdbarch are
performed unnecessarily, which will reject some target descriptions if
they are missing some mandatory feature.

This patch adds an optional argument to "maint print c-tdesc", which
is an XML file target description, so that we can combine the two
steps above into one step, and don't have to involve in global current
tdesc.

gdb:

2017-07-26  Yao Qi  <yao.qi@linaro.org>

* NEWS: Mention it.
* features/Makefile (%.c: %.xml): Pass the xml file name to
command "maint print c-tdesc".
* target-descriptions.c (maint_print_c_tdesc_cmd): Get file
name from 'arg'.

gdb/doc:

2017-07-26  Yao Qi  <yao.qi@linaro.org>

* gdb.texinfo (Maintenance Commands): Document optional
argument of "maint print c-tdesc".

Class-fy target_desc

This patch adds ctor and dtor in target_desc.

gdb:

2017-07-26  Yao Qi  <yao.qi@linaro.org>

* target-descriptions.c (target_desc): Add ctor and dtor.  Do
in-class initialization.
(tdesc_create_feature): Call new instead of XCNEW.
(free_target_description): Ue delete.

Add enum for result of fast_tracepoint_collecting

I got confused by the result value of fast_tracepoint_collecting, while
it sounds like it would return true/false (whether the thread is
collecting or not), it actually returns:

  0: not collecting
  1: in the jump pad, before the relocated instruction
  2: in the jump pad, at or after the relocated instruction

To avoid confusion, I think it would be nice to make it return an enum.
If you can help find a shorter but still relavant name, it would be
awesome.  Otherwise, we'll go with that, fast_tpoint_collect_result,
which is at least consistent with the existing
fast_tpoint_collect_status.

gdb/gdbserver/ChangeLog:

* tracepoint.h (enum class fast_tpoint_collect_result): New
enumeration.
(fast_tracepoint_collecting): Change return type to
fast_tpoint_collect_result.
* tracepoint.c (fast_tracepoint_collecting): Likewise.
* linux-low.h: Include tracepoint.h.
(struct lwp_info) <collecting_fast_tracepoint>: Change type to
fast_tpoint_collect_result.
* linux-low.c (handle_tracepoints): Adjust.
(linux_fast_tracepoint_collecting): Change return type to
fast_tpoint_collect_result.
(maybe_move_out_of_jump_pad, linux_wait_for_event_filtered,
linux_wait_1, stuck_in_jump_pad_callback,
lwp_signal_can_be_delivered, linux_resume_one_lwp_throw,
proceed_one_lwp): Adjust to type change.

Automatic date update in version.in