Arnout Vandecappelle (Essensium/Mind) [Sat, 31 Mar 2018 22:28:21 +0000 (00:28 +0200)]
netcat: force-remove nc link before install
The nc -> netcat symlink is not created if nc exists already, e.g.
from busybox.
For netcat itself this is not needed, it is always installed.
Cc: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Carlos Santos [Thu, 12 Oct 2017 15:14:18 +0000 (12:14 -0300)]
netcat: add forced dependence on BusyBox
It may be necessary if packages become built in parallel, leading to a
race condition on the creation of the "nc" link.
Of course this still leaves a race conditon if other netcat competitors
but we must assume thet the user is a grown-up person who knows what is
doing.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Arnout: Don't force-remove the existing nc, not needed according to
Romain.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bernd Kuhls [Sun, 4 Mar 2018 15:06:06 +0000 (16:06 +0100)]
package/kodi: remove imx support
https://git.buildroot.net/buildroot/commit/?id=
266208972192f1e0869f89d7be941de6294a810a
broke imx support in Kodi because previously the G2D libraries were
part of the imx-gpu-viv package:
CMake Error at /usr/share/cmake-3.7/Modules/FindPackageHandleStandardArgs.cmake:138 (message):
Could NOT find IMX (missing: G2D_LIBRARY)
Adjusting the Kodi package to use the imx-gpu-g2d as well still does
not provide a working build:
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp: In member function 'void CIMX::Deinitialize()':
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp:79:21: error: 'DCIC_IOC_STOP_VSYNC' was not declared in this scope
ioctl(m_fddcic, DCIC_IOC_STOP_VSYNC, 0);
^~~~~~~~~~~~~~~~~~~
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp: In member function 'bool CIMX::UpdateDCIC()':
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp:109:19: error: 'DCIC_IOC_STOP_VSYNC' was not declared in this scope
ioctl(m_fddcic, DCIC_IOC_STOP_VSYNC, 0);
^~~~~~~~~~~~~~~~~~~
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp:115:21: error: 'DCIC_IOC_START_VSYNC' was not declared in this scope
ioctl(m_fddcic, DCIC_IOC_START_VSYNC, 0);
^~~~~~~~~~~~~~~~~~~~
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp: In member function 'virtual void CIMX::Process()':
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp:125:19: error: 'DCIC_IOC_START_VSYNC' was not declared in this scope
ioctl(m_fddcic, DCIC_IOC_START_VSYNC, 0);
^~~~~~~~~~~~~~~~~~~~
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp:131:19: error: 'DCIC_IOC_STOP_VSYNC' was not declared in this scope
ioctl(m_fddcic, DCIC_IOC_STOP_VSYNC, 0);
^~~~~~~~~~~~~~~~~~~
Although it might be possible to fix these bugs with something like
#define DCIC_IOC_CONFIG_DCIC _IO('D', 12)
#define DCIC_IOC_START_VSYNC _IO('D', 15)
#define DCIC_IOC_STOP_VSYNC _IO('D', 16)
as done in
https://raw.githubusercontent.com/LibreELEC/LibreELEC.tv/libreelec-7.0/projects/imx6/patches/kodi/imx6-jarvis.patch
we would still try to ride a dead horse. The upcoming Kodi version
18.0-Leia will remove imx support completely, see upstream PR 12990.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas: keep an explicit -DENABLE_IMX=OFF in CONF_OPTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Sun, 4 Mar 2018 15:06:05 +0000 (16:06 +0100)]
package/freescale-imx: Remove imx6s from has_vpu list
According to imx-vpu-5.4.37/Makefile, line 6:
INCLUDE_LIST:= IMX27ADS IMX51 IMX53 IMX6Q
imx6s is not supported by the imx-vpu package. Its install target,
guarded by
ifeq ($(PLATFORM), $(findstring $(PLATFORM), $(INCLUDE_LIST)))
does nothing, causing a build error later on in the imx-vpuwrap package
checking for vpu_lib.h... no
configure: error: lib_vpu is required, consider installing imx-lib
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Nicolas Cavallari [Wed, 7 Mar 2018 09:48:12 +0000 (10:48 +0100)]
check-package: Flag usage of '\t \\$'.
check-package would flag tabs before a backslash ('\t\\'),
two spaces before a backslash (' \\') but would not flag a tab before space
before backslash ('\t \\'), allowing someone to bypass the check.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rafal Susz [Tue, 13 Mar 2018 18:00:06 +0000 (19:00 +0100)]
configs/s6lx9_microboard_defconfig: purge custom dts boolean
Since custom dts files are unconditionally handled *KERNEL_USE_CUSTOM_DTS
is no longer available/needed.
Signed-off-by: Rafal Susz <rafal.susz@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rafal Susz [Tue, 13 Mar 2018 18:00:05 +0000 (19:00 +0100)]
package/linux: fix custom dts files handling
Custom dts files are still conditionally copied based on non existing
boolean. So it is currently not possible to use custom dts file(s) at all.
List of dts files is now iterated and files are copied into dedicated kernel arch dir.
Signed-off-by: Rafal Susz <rafal.susz@gmail.com>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Valentin Korenblit [Tue, 27 Mar 2018 07:44:34 +0000 (09:44 +0200)]
package/xterm: Avoid freetype2 path poisoning using imake
When imake is installed on the host, it tries to include
freetype headers from host, so we must override ac_cv_path_IMAKE
to avoid this.
Extract from config.log:
configure:14803: checking if we should use imake to help
configure:14820: result: yes
configure:14829: checking for xmkmf
configure:14846: found /usr/bin/xmkmf
configure:14857: result: /usr/bin/xmkmf
configure:14920: testing Using /usr/bin/xmkmf ...
configure:15015: testing IMAKE_CFLAGS -I. -I/usr/include/freetype2
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
[Thomas: pass ac_cv_path_IMAKE="" as suggested by Romain Naour.]
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Tue, 13 Mar 2018 21:18:25 +0000 (22:18 +0100)]
meson: fix error when restorecon unavailable
host-meson is used by some packages such as libmpdclient.
If selinuxenabled is installed on host but restorecon is unavailable
(for an "unknwown" reason), install will crash.
Fixes:
- http://autobuild.buildroot.net/results/
d5dcdfdfab3503fdc387f99e68267972a38c417d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Jörg Krause [Wed, 14 Mar 2018 19:43:56 +0000 (20:43 +0100)]
package/libbsd: enable for non-glibc toolchains
libbsd builds now almost fine with a musl or uClibc toolchain, except
for one issue introduced in the latest version bump. Upstream commit
22fbd62368c39de8ac5e249d1502d5ac0ffdef30 [1] uses the glibc-only macro
`__GLIBC_PREREQ`. The issue is fixed by the attached patch from upstream,
which fixes the use of `__GLIBC_PREREQ` on non-glibc toolchains.
Backported from:
https://cgit.freedesktop.org/libbsd/patch/?id=
1f8a3f7bccfc84b195218ad0086ebd57049c3490
netcat-openbsd is the only package selecting libbsd. However, building
it still needs a glibc toolchain, as it uses `b64_ntop` which is not
available in musl or uClibc.
Build has been successfully tested with:
* armv7-eabihf--glibc--bleeding-edge-2017.11-1
* armv7-eabihf--musl--bleeding-edge-2018.02-1
* armv7-eabihf--uclibc--bleeding-edge-2018.02-1
[1] https://cgit.freedesktop.org/libbsd/commit/?id=
22fbd62368c39de8ac5e249d1502d5ac0ffdef30
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Ricardo Martincoski [Tue, 13 Mar 2018 03:09:44 +0000 (00:09 -0300)]
.gitlab-ci.yml: check flake8
Add a test to check Python code style in the whole buildroot tree.
Search files by type in order to help flake8 to find the Python scripts
without .py extension. But don't rely only in the output of 'file' as it
uses heuristics and sometimes it is wrong (specially identifying Python
files as C++ source for the 'file' version currently in the Docker
image).
Include in the output:
- the list of Python files processed;
- statistics for each kind of warning;
- the total number of warnings;
- the number of Python files processed.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Ricardo Martincoski [Fri, 30 Mar 2018 23:10:55 +0000 (20:10 -0300)]
.gitlab-ci.yml: use image with flake8
Bump the docker image to the latest tag to have flake8 pre-installed.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
André Hentschel [Thu, 15 Mar 2018 19:45:54 +0000 (20:45 +0100)]
wine: depend on shared libraries
Even if --enable-static --disable-shared is passed, wine tries to
build a shared library, causing a build failure in a BR2_STATIC_LIBS=y
configuration:
/home/test/buildroot/output/host/i686-buildroot-linux-uclibc/sysroot/usr/lib/libc.a(__uClibc_main.os): In function `__uClibc_fini':
__uClibc_main.c:(.text.__uClibc_fini+0x10): undefined reference to `__fini_array_start'
/home/test/buildroot/output/host/lib/gcc/i686-buildroot-linux-uclibc/6.4.0/../../../../i686-buildroot-linux-uclibc/bin/ld: /home/test/buildroot/output/host/i686-buildroot-linux-uclibc/sysroot/usr/lib/libc.a(__uClibc_main.os): relocation R_386_GOTOFF again
st undefined hidden symbol `__fini_array_start' can not be used when making a shared object
/home/test/buildroot/output/host/lib/gcc/i686-buildroot-linux-uclibc/6.4.0/../../../../i686-buildroot-linux-uclibc/bin/ld: final link failed: Bad value
collect2: error: ld returned 1 exit status
make[2]: *** [libwine.so.1.0] Error 1
make[2]: Leaving directory `/home/test/buildroot/output/build/wine-3.0/libs/wine'
make[1]: *** [libs/wine] Error 2
Since using wine in a static linking environment is fairly unlikely,
we simply mark the wine package unavailable on static-only
configurations.
Since we need to add a Config.in comment, we also introduced a
BR2_PACKAGE_WINE_ARCH_SUPPORTS hidden boolean, to share the
architecture dependencies definition between the wine config option
and the comment.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
[Thomas:
- add a comment in the Config.in file about the dependency
- add BR2_PACKAGE_WINE_ARCH_SUPPORTS
- extend the commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Yann E. MORIN [Fri, 1 Dec 2017 15:09:46 +0000 (16:09 +0100)]
infra/pkg-kconfig: do not update-(def)config to a directory
Currently, if the user specifies the path to an existing directory as
the path to the custom (def)config file (FOO_KCONFIG_FILE), then we
happily create a file in there, either 'defconfig' or '.config' (or
whatever the .config is named for that package), depending on whether
we're saving a defconfig or a full config.
So, we could save the file, but then the Buildroot defconfig file that
contains that path would no longer be reusable as-is, because we
interpret that path as a path to a file.
Furthermore, if the directory-portion of FOO_KCONFIG_FILE does not
exist yet, the update would fail, because cp does not create missing
directory components.
So we fix that by adding an explicit test for the directory-ness of the
target file, and then an explicit mkdir to create missing directory
components.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Yann E. MORIN [Fri, 1 Dec 2017 15:09:45 +0000 (16:09 +0100)]
infra/pkg-config: hide away non-critical commands
When updating back the (def)config file, the touch command is not very
useful by default, so hide it away.
We do not hide away the cp command, as that could confuse the user under
some circunmstances. For example, when the toolchain does not yet exist,
the uClibc buildsystem will complain multiple times about gcc not being
found, like so:
make[2]: /home/ymorin/dev/buildroot/O/host/bin/i686-buildroot-linux-uclibc-gcc: Command not found
(Note that we can not suppress those warnings, as they are on stderr,
and we still want to see stderr in case of real errors).
So, if we were to hide the cp command, the user could be left confused,
even though we were sucessful in updating back the (def)config file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Yann E. MORIN [Fri, 1 Dec 2017 15:09:44 +0000 (16:09 +0100)]
infra/pkg-kconfig: commonalise update-(def)config code
Except for the nice human-friendly reminder of the command that the user
was just running, and the name of the file to copy from, those two rules
are exactly the same.
Make that a common macro that is shared, so that it's easier to add more
checks, and to simplify maintenance.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Korsgaard [Sat, 31 Mar 2018 19:03:57 +0000 (21:03 +0200)]
Makefile: Ensure BASE_TARGET_DIR exists, not TARGET_DIR
This was present in Yann's original patch, but got dropped when I rebased
commit
7e9870ce32 (core: introduce intermediate BASE_TARGET_DIR variable) to
fix the Makefile conflicts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Sat, 21 Oct 2017 20:54:57 +0000 (22:54 +0200)]
lua: always use host-lua for host-luainterpreter
Similar to how we do for openssl.
host-luainterpreter is only used by the luarocks infrastructure, and there
is afaik no specific reason why the host lua variant must match the target one.
Luajit only supports a limited number of architectures, so building it for
the host limits the architectures Buildroot can be used on (E.G. powerpc64
autobuilders).
To fix this, always use host-lua. Slightly rework lua.mk to ensure
host-lua-5.1 is used when luajit is selected, and drop the logic for using
host-luajit.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Korsgaard [Sat, 31 Mar 2018 10:27:11 +0000 (12:27 +0200)]
ktap: bump version for linux-4.8 support
Fixes #10776
The upstream git repo contains a number of fixes for building against newer
kernel versions, so bump the version.
git shortlog
eb66d40310c93dc82bc8eac889744c1ed1f01f7b..
Alain Kalker (2):
uprobe: Print the symbol, not the matching pattern
uprobe: Blacklist uretprobes on _start
Aleksa Sarai (2):
runtime: update GFP_WAIT to GFP_RECLAIM
userspace: fix up argument parsing NULL dereference
Alexey Makhalov (1):
Fix building for v4.8 kernel
Azat Khuzhin (12):
Use get_unused_fd_flags(0) instead of get_unused_fd()
Support trace_seq::seq
Ignore separate debug files (*.dwo)
Use trace_seq_has_overflowed()
makefile: split vim plugins installing into separate target
makefile: use DESTDIR for install (allow to change install dir)
makefile: install: create dirs
makefile: use ldflags for linking ktap
makefile: add CPPFLAGS to KTAPC_CFLAGS, to allow change default flags
ignore: exclude /debian
Support compilation for 4.2 (ftrace_events cleanup)
runtime: fix building on 4.3
Jovi Zhangwei (11):
Merge pull request #84 from azat/linux-3.19-fixes-v3
Merge pull request #85 from azat/debian-preparations-v2
Merge pull request #88 from NanXiao/master
Merge pull request #89 from NanXiao/patch-1
Merge pull request #91 from NanXiao/patch-1
Merge pull request #90 from azat/linux-4.2-compilation-fixes
Merge pull request #99 from cyphar/fix-null-deref
Merge pull request #98 from cyphar/fix-gfp-reclaim
Merge pull request #97 from azat/fix-building-4.3-__GFP_RECLAIM
Merge pull request #103 from ackalker/blacklist
Merge pull request #104 from YustasSwamp/master
Nan Xiao (3):
Update tutorial.md
Update Makefile
Fix memory leak issue in main function.
WEI ZHANG (1):
ktap: Change the copyright to Huawei Technologies
While we are at it, also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Sat, 31 Mar 2018 07:22:51 +0000 (09:22 +0200)]
DEVELOPERS: add myself for a number of unmaintained boards
These boards I own and currently have no entries in DEVELOPERS, so add them.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Sat, 31 Mar 2018 09:06:01 +0000 (11:06 +0200)]
fs: remove intermediate artefacts
Each of the intermediate, per-rootfs target directories, as well as the
intermediate tarball, can take quite some place, and is mostly a
duplication of what's already in target/. The only delta, if any, would
be the tweaks made by the filesystem image generations, but those tweaks
are most probably only meaningful when seen as root.
We normally do not remove intermediate files, but those can be quite
large, and are not directly usable by, nor accessible to the user.
So, get rid of them once the filesystem has been generated.
This does not need to be done in fakeroot.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Sat, 31 Mar 2018 09:06:00 +0000 (11:06 +0200)]
fs: get rid of package-provided post-fs hooks
Now that the pre-fs ones are run on a transient copy of target/, the
post-fs hooks are no longer needed because we no longer need to restore
the target/ directory as it is only a internal copy.
Remove support for the post-fs hooks, and update the sole package using
them.
We do not add a legacy check because this was mostly a purely-internal
detail that was never really exposed nor documented.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Sat, 31 Mar 2018 09:05:59 +0000 (11:05 +0200)]
fs: run packages' filesystem hooks in a copy of target/
Currently, some packages may register hooks to be run just before and
just after the generic tarball image is generated, because they need to
prepare the filesystem for read-only or read-write operation.
However, this means that, if any of the hooks or the image generation
fails, the target directory is left in a dangling, inconsistent state.
We fix that by doing a copy of target/, run the hooks on that copy,
generate the generic tarball image out of that, and get rid of the copy.
This way, we can guarantee consistency of the target directory, and we
can even ditch support for post-fs hooks (those that restore target/).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Sat, 31 Mar 2018 09:05:58 +0000 (11:05 +0200)]
fs: use a common tarball as base for the other filesystems
Currently, some filesystems may want to tweak the content of the target
directory, create special device nodes etc... This all means that:
- the content of the target directory for a specific filesystems may
depend on whether another filesystem is enabled or not; for example,
cpio will create a /init script or symlink and a /dev/console node;
- the filesystems can not be built in parallel, because they may change
the content of the target directory while another is being assembled.
Furthermore, the same fakeroot script is executed over-and-over-again
for each filesystem, to create the device nodes, the users and their
homes and files, and setting permissions...
We introduce an intermediate tarball, for which we do the full fakeroot
shebang.
That tarball then serves as the base for the other filesystems, with a
very simple fakeroot script that untars the common tarball, and calls
the actual filesystem image generator on that.
Note that we use a very simple tar command to generate the intermediate
tarball, because we are not concerned with reproducibility of the
archive itself (only of the archived files).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Sat, 31 Mar 2018 09:05:57 +0000 (11:05 +0200)]
fs: introduce a macro for reproducible command
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Sat, 31 Mar 2018 09:05:56 +0000 (11:05 +0200)]
fs: new intermediate rootfs-common to gather common dependencies
Before we can create an intermediate tarball for all filesystems, we
nedd to move the common dependencies needed to generate that
intermediate tarball, rather than leave those dependencies to each
filesystem.
So, we introduce rootfs-common, which gathers all those common
dependencies.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Sat, 31 Mar 2018 09:05:55 +0000 (11:05 +0200)]
fs: introduce per-rootfs TARGET_DIR variable
... which for now still points to the base target directory, but this is
a step forward.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Sat, 31 Mar 2018 09:05:54 +0000 (11:05 +0200)]
fs: split per-rootfs dependency line
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Sat, 31 Mar 2018 09:05:53 +0000 (11:05 +0200)]
fs: use a per-rootfs fakeroot script
... and locate that script in a per-rootfs directory.
Just like for ROOTFS, this variable will leak down the dependency tree to
target-finalize and packages - But it doesn't matter as it isn't used
outside fs/.
[Peter: extend commit message]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Sat, 31 Mar 2018 09:05:52 +0000 (11:05 +0200)]
fs: define per-rootfs directory
This will serve in future commits to store pre-rootfs files, like
fakeroot script...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Sat, 31 Mar 2018 09:05:51 +0000 (11:05 +0200)]
fs: set per-rootfs variable name
Like we do for packages with the PKG variable, set ROOTFS to contain the
upper-case name of the rootfs currently being generated.
This will be useful in later patches, when we need more per-rootfs
variables, like a per-rootfs TARGET_DIR for example.
In Makefiles, per-rule variables trickle down the dependency chain, to
all dependencies of that rule, so we have to stop ROOTFS as soon as
we're not in a rootfs. This means we have to stop it at target-finalize
(which is a dependency of all filesystems), and for each package
individually, since some packages (host or target) can be direct
dependencies of filesystems as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Sat, 31 Mar 2018 09:05:50 +0000 (11:05 +0200)]
core: introduce intermediate BASE_TARGET_DIR variable
This new BASE_TARGET_DIR variable is set in stone to point to the real
location where packages will be installed. Its name is modelled after
its definition: it is located in $(BASE_DIR), and it is named 'target/',
hence BASE_TARGET_DIR.
The already-existing TARGET_DIR variable now simply points to the same
location, except that it is recursively expanded, so that we can later
change it depending on the context.
All locations that really need to reference the existing target/
directory, are changed to use BASE_TARGET_DIR; surprinsigly enough, they
all seem to be located in the main Makefile. :-) The rest is left with
using good-old TARGET_DIR.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Sat, 31 Mar 2018 09:05:49 +0000 (11:05 +0200)]
fs/iso9660: rename internal variable
We're soon to introduce a generic variable with that name, i.e.
$(FS_NAME)_TARGET_DIR, so our internal, temporary variable would
clash with it.
Just rename it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Sat, 31 Mar 2018 09:05:48 +0000 (11:05 +0200)]
fs/cpio: don't extend packages' permissions table
Currently, when we build a cpio filesystem without static devices, we
shoehorn the /dev/console node as if it were specified by a package.
This means that this device is added for all filesystems as well, not
just the cpio. But if we disable cpio, that device is not created for
other filesystems.
This is not very clean, and may break expectations.
Instead, use an explicit mknod as part of the _CMD, as we know it's
going to run under fakeroot.
This is still visible to all filesystems built after cpio, and not to
those built before it, though.
[Peter: ensure /dev exists, simplify comment]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Sat, 31 Mar 2018 09:05:47 +0000 (11:05 +0200)]
fs: run filesystem hooks under fakeroot
Currently, the pre-gen hooks of the various filesystems are run before
we enter the fakeroot.
However, this precludes those hooks from doing actions that require
root, like creating a pseudo-device or the likes.
So, move those pre-gen hooks under fakeroot.
This has currently no side-effect, as they are still called before
everything else in the fakeroot script, even the system-wide chown call.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Sat, 31 Mar 2018 16:34:58 +0000 (18:34 +0200)]
package/dovecot: add optional support for libsodium
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabio Estevam [Sat, 31 Mar 2018 18:34:58 +0000 (15:34 -0300)]
linux-headers: bump 4.{4, 9, 14, 15}.x series
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabio Estevam [Sat, 31 Mar 2018 18:34:57 +0000 (15:34 -0300)]
linux: bump default to version 4.15.15
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Angelo Compagnucci [Wed, 7 Mar 2018 22:19:38 +0000 (23:19 +0100)]
package/docker-engine: convert to golang infrastructure
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[Thomas:
- adapt to the changes in the golang-package infrastructure
- keep the logic to support BR2_PACKAGE_DOCKER_ENGINE_STATIC_CLIENT]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Fri, 30 Mar 2018 16:50:36 +0000 (18:50 +0200)]
package/apache: add optional support for lua
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas Petazzoni [Sat, 31 Mar 2018 13:27:36 +0000 (15:27 +0200)]
package/docker-proxy: convert to golang infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: remove automatically added host-go dependency]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Angelo Compagnucci [Sat, 31 Mar 2018 13:27:34 +0000 (15:27 +0200)]
package/docker-containerd: convert to golang infrastructure
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Angelo Compagnucci [Sat, 31 Mar 2018 13:27:33 +0000 (15:27 +0200)]
package/runc: convert to golang infrastructure
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Angelo Compagnucci [Sat, 31 Mar 2018 13:27:32 +0000 (15:27 +0200)]
package/flannel: convert to golang infrastructure
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Angelo Compagnucci [Sat, 31 Mar 2018 13:27:31 +0000 (15:27 +0200)]
docs/manual: add documentation for the golang infrastructure
This patch adds the documentation for the golang infrastructure.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Angelo Compagnucci [Sat, 31 Mar 2018 13:27:30 +0000 (15:27 +0200)]
package/pkg-golang: new package infrastructure
This patch adds a new infrastructure for golang based packages.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout:
- Rewrap comments to 80 columns.
- Create a global definition of GO_TARGET_ENV.
- <PKG>_GO_ENV is appended to the default env instead of replacing it.
- Add a note to inner-golang-package that only target is supported.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Thomas Petazzoni [Sat, 31 Mar 2018 13:27:29 +0000 (15:27 +0200)]
docker-containerd: remove symlink to $(RUNC_SRCDIR)
The DOCKER_CONTAINERD_CONFIGURE_CMDS creates a symlink to runc's
source directory, but it does not build depend on runc, which means
that the runc package may not have been extracted/built before
docker-containerd.
Therefore, when doing a build with "make docker-containerd", this
symbolic link is broken, but it doesn't prevent docker-containerd from
building.
Therefore, this symlink is not necessary and can be dropped.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Arnout Vandecappelle (Essensium/Mind) [Fri, 4 Aug 2017 16:31:30 +0000 (18:31 +0200)]
Makefile: create symlink to non-default HOST_DIR
If BR2_HOST_DIR is not the default, it can be difficult to find the
host directory (i.e., HOST_DIR always has to be passed explicitly in
addition to the output directory). For example, the Eclipse plugin
assumes that HOST_DIR=BASE_DIR/host.
Create a symlink from $(BASE_DIR)/host to $(HOST_DIR) if it is not the
default. Also remove it in the clean target.
When BR2_HOST_DIR is the default, HOST_DIR_SYMLINK will be empty so
there will be no additional dependency to dirs and nothing to remove
in clean.
Fixes https://bugs.busybox.net/show_bug.cgi?id=10151
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Arnout Vandecappelle (Essensium/Mind) [Fri, 4 Aug 2017 16:31:29 +0000 (18:31 +0200)]
Makefile: move mkdir rule to after HOST_DIR is defined
HOST_DIR is defined twice: once to its default value before .config is
included, and once more to BR2_HOST_DIR after .config is included.
However, the rule that defines the mkdir for HOST_DIR comes between
these two, so it will always use the default definition. Therefore,
if a non-default BR2_HOST_DIR is used, there will be no rule to create
that directory, while the dirs target depends on it.
This happens to work at the moment, because in the dirs target,
$(STAGING_DIR) comes before $(HOST_DIR), so $(HOST_DIR) will be created
implicitly. However, this will fail in top-level parallel builds where
both will be created in parallel.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Jaap Crezee [Mon, 4 Sep 2017 15:19:54 +0000 (17:19 +0200)]
python-libusb1: new package
License info from PyPI is wrong: it is LGPL-2.1+, not GPL-2.0. The
package includes a COPYING file with GPL-2.0, but since it is really
LGPL-2.1+ only the COPYING.LESSER file is relevant.
Signed-off-by: Jaap Crezee <jaap@jcz.nl>
[Arnout: regenerate with scanpypi, fix legal info]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Thomas Petazzoni [Sat, 2 Sep 2017 21:29:38 +0000 (23:29 +0200)]
utils/genrandconfig: use --no-check-certificate in wget by default
A number of autobuilder failures are due to the fact that autobuilder
instances use old distributions, with old SSL certificates, and
therefore wget aborts with an error "The certificate of `xyz.org' is
not trusted.".
In order to avoid such failures that are not very interesting in the
context of the autobuilders, we pass --no-check-certificate to
wget. The integrity of the downloaded files is anyway verified by the
hashes, and this is only meant to be used in the context of
testing/CI, not in production.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Peter Korsgaard [Sat, 31 Mar 2018 06:11:55 +0000 (08:11 +0200)]
nodejs: security bump to version 8.11.1
Fixes the following security issues:
- Fix for inspector DNS rebinding vulnerability (CVE-2018-7160): A malicious
website could use a DNS rebinding attack to trick a web browser to bypass
same-origin-policy checks and allow HTTP connections to localhost or to
hosts on the local network, potentially to an open inspector port as a
debugger, therefore gaining full code execution access. The inspector now
only allows connections that have a browser Host value of localhost or
localhost6.
- Fix for 'path' module regular expression denial of service
(CVE-2018-7158): A regular expression used for parsing POSIX paths could
be used to cause a denial of service if an attacker were able to have a
specially crafted path string passed through one of the impacted 'path'
module functions.
- Reject spaces in HTTP Content-Length header values (CVE-2018-7159): The
Node.js HTTP parser allowed for spaces inside Content-Length header
values. Such values now lead to rejected connections in the same way as
non-numeric values.
While we are at it, also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Romain Naour [Sat, 31 Mar 2018 10:55:30 +0000 (12:55 +0200)]
package/zsh: remove busybox show others dependency
Back in 2013, zsh was added to Buildroot [1] with the dependency on
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS. This dependency was keept with the
refactoring [2].
But Busybox doesn't provide a zsh shell in the firt place.
This dependency can be removed.
[1]
3d19b7ef598f3534b46cf0746a81bc437579127c
[2]
1dbd7b991025a8bf39ab5d25c2fd97f47f084bac
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Phil Eichinger <phil.eichinger@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
André Hentschel [Wed, 7 Mar 2018 20:15:58 +0000 (21:15 +0100)]
squid: add optional dependency on libkrb5
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
André Hentschel [Wed, 7 Mar 2018 20:15:57 +0000 (21:15 +0100)]
libkrb5: new package
Signed-off-by: André Hentschel <nerv@dawncrow.de>
[Thomas:
- remove LIBKRB5_VERSION_MAJOR
- minor tweaks to commit title and Config.in help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Evgeniy Didin [Tue, 19 Dec 2017 14:55:54 +0000 (17:55 +0300)]
board: add support for ARC HS Development Kit (HSDK)
Synopsys DesignWare HSDK (which stands for ARC HS
Development Kit) is the latest and greatest development
platform that sports quad-core ARC HS38 in real silicon.
Most noticeable features of the board are:
* Quad-core ARC HS38 CPU running at 1GHz
* 4Gb of DDR
* Built-in Vivante GPU (well supported via open source
Etnaviv drivers)
* Built-in Wi-Fi/Bluetooth module (RedPine RS-9113)
And as usual we have:
* [micro] SD-card slot
* 2 USB 2.0 ports
* 1Gbit Ethernet port
* Built-in Digilent JTAG probe
* Serial port accessible via micro-USB port
Writing sdcard.img on SDcard creates two partitions:
* FAT32 with uImage and uboot.env
* EXT4 with root filesystem
We modify kernel config because in default hsdk kernel config
CONFIG_INITRAMFS_SOURCE parameter is set and when we build
rootfs separately (BR2_TARGET_ROOTFS_INITRAMFS is not set)
error appears. Also we set up CONFIG_ARC_UBOOT_SUPPORT which
enables usage of uboot variables in the boot process.
[Peter: Fix comments and rename defconfig to snps_archs38_hsdk_defconfig,
Add defconfig to DEVELOPERS and fixup board/synopsys entry,
Drop postimage script, rename env file in genimage.cfg and drop size
setting for rootfs partition,
Add "" for CONFIG_INITRAMFS_SOURCE in linux fragment]
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Sat, 29 Apr 2017 20:56:43 +0000 (22:56 +0200)]
package/x11r7/xserver_xorg-server: add sysv init script
We need ":0.0 vt01" to make sure Xorg finds the correct terminal.
Quoting https://www.x.org/archive/X11R6.8.0/doc/Xorg.1.html
-allowMouseOpenFail
Allow the server to start up even if the mouse device can't be
opened or initialised.
We need this option in case BR2_PACKAGE_XDRIVER_XF86_INPUT_MOUSE was
not enabled.
-noreset
prevents a server reset when the last client connection is closed.
We need this option to prevent auto-close of Xorg.
Tested with a qemu image and Kodi.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Arnout: copy an abbreviate version of the explanation above to the
script.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Yann E. MORIN [Sat, 31 Mar 2018 12:52:50 +0000 (14:52 +0200)]
support/check-uniq-files: support weird locales and filenames
Currently, when a filename contains characters not representable in the
user's locale, we fail hard, especially when the host python is python3.
This is because python2 and python3 handle encoding/decoding strings
differently, with python3 presumable doing the right thing, but it
breaks on some systems, while python2 presumable does the wrong thing,
but it works everywhere. (Just joking, obviously...)
Part of the issue being that the csv reader in python2 is broken with
UTF8.
We fix the issue by ditching the csv reader, and simply read the file in
binary mode, manually partitioning the lines on the first comma.
Then, we use the binary-encoded (really, un-encoded) package names and
filenames as values and keys, respectively.
Finally, for each filename or package we need to print, we try to decode
them with the defaults for the user settings, but catch any decoding
exception and fall back to dumping the raw, binary values. Which codec
is used by default differs between Python version, but in all cases
something sane is printed at least.
Thanks a lot to Arnout for the live help doing this patch. :-)
Reported-by: Jaap Crezee <jaap@jcz.nl>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Jaap Crezee <jaap@jcz.nl>
[Arnout: commit log improvement]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Yves Deweerdt [Wed, 21 Jun 2017 20:39:44 +0000 (22:39 +0200)]
configs/raspberrypi0w_defconfig: new defconfig for Raspberry Pi Zero W
Up to now, Raspberry Pi Zero W (rpi0w) could be built with the normal
raspberrypi0_defconfig. However, then you don't have support for the
Bluetooth out-of-the-box, which makes using a W a bit pointless.
Therefore, create a separate defconfig for the W. It is a copy of
raspberrypi0_defconfig with the following changes:
- Add DT overlays (from rpi-firmware) to support Bluetooth.
- Pass --add-pi3-miniuart-bt-overlay to post-image.sh.
Since there is now a separate raspberrypi0w_defconfig, the W support
can be removed from raspberrypi0_defconfig.
Signed-off-by: Yves Deweerdt <yves.deweerdt.linux@gmail.com>
[Arnout:
- Bump to same kernel version as raspberrypi0.
- Remove redundant comment.
- Remove redundant default BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS=y.
- Improve commit log.
- Refresh .gitlab-ci.yml.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Yann E. MORIN [Sat, 31 Mar 2018 07:20:20 +0000 (09:20 +0200)]
package/openocd: fix fallout after no-C++ fixups
Commit
4cd1ab158 (core: alternate solution to disable C++) made use of a
non-existent 'no' binary when C++ is not available in the toolchain.
However, some packages, like jimtcl as bundled in opeocd, really want to
find the binary that $CXX contains.
Revert openocd to use 'false' instead of 'no'.
Fixes:
http://autobuild.buildroot.org/results/cbd/
cbd5ab97fb0659968ff628461130627cf1745955/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Sat, 31 Mar 2018 07:20:19 +0000 (09:20 +0200)]
package/jimtcl: fix fallout after no-C++ fixups
Commit
4cd1ab158 (core: alternate solution to disable C++) made use of a
non-existent 'no' binary when C++ is not available in the toolchain.
However, some packages, like jimtcl, really want to find the binary that
$CXX contains.
Revert jimtcl to use 'false' instead of 'no'.
Fixes:
http://autobuild.buildroot.org/results/54f/
54f3df03551fbdf293d33dc1e3f08005faa15321/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Tue, 27 Mar 2018 17:50:13 +0000 (20:50 +0300)]
picocom: bump to version 3.1
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adrian Perez de Castro [Tue, 27 Mar 2018 20:05:55 +0000 (23:05 +0300)]
woff2: fix static builds
Include a patch to make CMake correctly find the Brotli libraries when
they have been built as static libraries.
Fixes:
- http://autobuild.buildroot.net/results/
f1c4b5aeb12af7b7a3e8ae01c219004ecd9befd6/
- http://autobuild.buildroot.net/results/
74d20ff38766466623cc4a9eb18afcda831bc20b/
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adrian Perez de Castro [Tue, 27 Mar 2018 20:05:54 +0000 (23:05 +0300)]
brotli: fix building of static libraries
Include a patch to make CMake honor the BUILD_SHARED_LIBS which
Buildroot sets to choose the kind of libraries to build.
Fixes:
- http://autobuild.buildroot.net/results/
f1c4b5aeb12af7b7a3e8ae01c219004ecd9befd6/
- http://autobuild.buildroot.net/results/
74d20ff38766466623cc4a9eb18afcda831bc20b/
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Sat, 31 Mar 2018 06:47:09 +0000 (08:47 +0200)]
support/config-fragments/autobuild: fix SSP in br-nios2-glibc
Commit
c8680956819fae8776d7bd6d1f0e67a7b6436672 ("toolchain: fix
detection of SSP support") fixed the SSP check so that it does the
correct thing for nios2 toolchains. While this commit fixed the
description of the Sourcery NIOSII toolchain, it didn't fix the
description for the autobuilders of the br-nios2-glibc toolchain,
causing some build failures. This commit adjusts br-nios2-glibc.config
to indicate that the toolchain doesn't have SSP support.
Fixes:
http://autobuild.buildroot.net/results/
6c44e328b7bffd8474d29d5bdf1ea109ec15f4ad/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Thu, 8 Mar 2018 16:42:52 +0000 (17:42 +0100)]
ncmpc: bump to version 0.29
Since version 0.28 ncmpc only supports the meson build.
Therefore, adapt to package infrastructure according to the user manual.
Add a hash for the license file.
Add a nmpc entry for myself in DEVELOPERS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Korsgaard [Fri, 30 Mar 2018 12:03:44 +0000 (14:03 +0200)]
docker-compose: bump version to 1.20.1
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Fri, 30 Mar 2018 12:03:43 +0000 (14:03 +0200)]
python-docker: bump version to 3.1.4
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rahul Bedarkar [Fri, 30 Mar 2018 19:32:08 +0000 (01:02 +0530)]
zstd: fix legal info
zstd is dual licensed under BSD-3-Clause or GPL-2.0 as per README.md
and source files license header.
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Fri, 30 Mar 2018 19:28:03 +0000 (21:28 +0200)]
utils/genrandconfig: adjust to core-dependencies removal
In commit
ea9669fffae7d807ccb3810eb6c662cbb9e8f96f ("core: kill
DEPENDENCIES_HOST_PREREQ"), the core-dependencies make target was
removed, and is now named just "dependencies".
This broke the utils/genrandconfig script, and this commit intends to
fix that.
Since this script is part of the Buildroot tree, it is provided
together with Buildroot, so we don't need to support the legacy
core-dependencies target. Someone checking out an older Buildroot will
have a working setup, with support/dependencies exposing
core-dependencies and utils/genrandconfig using core-dependencies. The
only broken situation will be between
ea9669fffae7d807ccb3810eb6c662cbb9e8f96f and this commit, but that's
not a sufficient reason to add some backward compatibility code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rahul Bedarkar [Fri, 30 Mar 2018 18:59:15 +0000 (00:29 +0530)]
opus-tools: update license
As per COPYING file, opusinfo is licensed under GPL version 2.
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rahul Bedarkar [Fri, 30 Mar 2018 18:59:14 +0000 (00:29 +0530)]
opus-tools: add hash for license file
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rahul Bedarkar [Fri, 30 Mar 2018 18:59:13 +0000 (00:29 +0530)]
opusfile: add hash for license file
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rahul Bedarkar [Fri, 30 Mar 2018 18:59:12 +0000 (00:29 +0530)]
opus: add hash for license file
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Fri, 30 Mar 2018 08:47:09 +0000 (10:47 +0200)]
libnss: bump version to 3.35
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Fri, 30 Mar 2018 08:47:08 +0000 (10:47 +0200)]
libnspr: bump version to 4.19
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Tue, 27 Mar 2018 11:00:22 +0000 (13:00 +0200)]
core: alternate solution to disable C++
Some packages that use libtool really need some love to be able to
disable C++ support.
This is because libtool will want to call AC_PROG_CXXCPP as soon as CXX
is set non-empty to something different from 'no'. Then, AC_PROG_CXXCPP
will want a C++ preprocessor that works on valid input *and* fail on
invalid input.
So, providing 'false' as the C++ compiler will then require that we do
have a working C++ preprocessor. Which is totally counter-productive
since we do not have a C++ compiler to start with...
bd39d11d2e (core/infra: fix build on toolchain without C++) was a
previous attempt at fixing this, by using the host's C++ preprocessor.
However, that is very incorrect (that's my code, I can say so!) because
the set of defines will most probably be different for the host and the
target, thus causing all sorts of trouble. For example, on ARM we'd have
to include different headers for soft-float vs hard-float, which is
decided based on a macro, which is not defined for x86, and thus may
redirect to the wrong (and missing) header.
Instead, we notice that libtool uses the magic value 'no' to decide that
a C++ compiler is not available, in which case it skips the call to
AC_PROG_CXXCPP.
Given that 'no' is not provided by any package in Debian and
derivatives, as well as in Fedora, we can assume that no system will
have an executable called 'no'. Hence, we use that as a magic value to
disable C++ detection altogether.
Fixes: #10846 (again)
Reported-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Damien Riegel <damien.riegel@savoirfairelinux.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Fri, 30 Mar 2018 09:17:39 +0000 (11:17 +0200)]
package/dovecot-pigeonhole: bump version to 0.5.1
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Fri, 30 Mar 2018 09:17:38 +0000 (11:17 +0200)]
package/dovecot: bump version to 2.3.1
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Fri, 30 Mar 2018 07:57:14 +0000 (10:57 +0300)]
libunistring: bump to version 0.9.9
Drop --{enable,disable}-threads; threading support is detected
automatically.
Add GPLv3 license file.
Add license files hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Thu, 29 Mar 2018 16:22:51 +0000 (18:22 +0200)]
busybox: bump version to 1.28.2
Drop 0003-tar-unzip-postpone-creation-of-symlinks-with-suspici.patch now upstream.
>From the release notes:
Bug fix release. 1.28.2 has fixes for tcpsvd (fixed fallout from
opt_complementary removal), udhcpd (do not ignore SIGTERM), tar and unzip
(reverted to previous, more permissive symlink handling), ssl_client (fixed
option parsing).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Fri, 30 Mar 2018 05:44:42 +0000 (08:44 +0300)]
libsigsegv: bump to version 2.12
Add license file hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jörg Krause [Thu, 29 Mar 2018 19:15:50 +0000 (21:15 +0200)]
bash: bump to version 4.4.18
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Joshua Henderson [Thu, 29 Mar 2018 18:15:06 +0000 (11:15 -0700)]
configs/atmel: bump to linux4sam_5.8
Bump at91sam9x5ek, atmel_sama5d27_som1_ek, atmel_sama5d2_xplained,
atmel_sama5d3_xplained, and atmel_sama5d4_xplained all variants to
linux4sam_5.8. The 3 foundation components have their tags changed
(AT91Bootstrap, U-Boot, Linux kernel).
at91bootstrap 3.8.10 is required to support gcc7.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Thu, 29 Mar 2018 14:52:09 +0000 (16:52 +0200)]
libopenssl: security bump to version 1.0.2o
Fixes the following security issues:
Constructed ASN.1 types with a recursive definition could exceed the stack
(CVE-2018-0739)
Constructed ASN.1 types with a recursive definition (such as can be found in
PKCS7) could eventually exceed the stack given malicious input with
excessive recursion. This could result in a Denial Of Service attack.
There are no such structures used within SSL/TLS that come from untrusted
sources so this is considered safe.
Incorrect CRYPTO_memcmp on HP-UX PA-RISC (CVE-2018-0733)
Because of an implementation bug the PA-RISC CRYPTO_memcmp function is
effectively reduced to only comparing the least significant bit of each
byte. This allows an attacker to forge messages that would be considered as
authenticated in an amount of tries lower than that guaranteed by the
security claims of the scheme. The module can only be compiled by the HP-UX
assembler, so that only HP-UX PA-RISC targets are affected.
rsaz_1024_mul_avx2 overflow bug on x86_64 (CVE-2017-3738)
This issue has been reported in a previous OpenSSL security advisory and a
fix was provided for OpenSSL 1.0.2. Due to the low severity no fix was
released at that time for OpenSSL 1.1.0. The fix is now available in
OpenSSL 1.1.0h.
There is an overflow bug in the AVX2 Montgomery multiplication procedure
used in exponentiation with 1024-bit moduli. No EC algorithms are affected.
Analysis suggests that attacks against RSA and DSA as a result of this
defect would be very difficult to perform and are not believed likely.
Attacks against DH1024 are considered just feasible, because most of the
work necessary to deduce information about a private key may be performed
offline. The amount of resources required for such an attack would be
significant. However, for an attack on TLS to be meaningful, the server
would have to share the DH1024 private key among multiple clients, which is
no longer an option since CVE-2016-0701.
This only affects processors that support the AVX2 but not ADX extensions
like Intel Haswell (4th generation).
For more details, see https://www.openssl.org/news/secadv/
20180327.txt
The copyright year changed in LICENSE, so adjust the hash to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Thu, 29 Mar 2018 14:15:15 +0000 (16:15 +0200)]
e2fsprogs: bump to version 1.44.1
From the release notes (https://lwn.net/Articles/750103/):
E2fsprogs 1.44.0 introduced a regression introduced which caused e2fsck
to fail to support HTree directories on big-endian systems. Fix how we
read block numbers for internal htree nodes.
Removed a potential memory leak from fsck.
E2image now correctly creates e2image files for bigalloc file systems.
Dumpe2fs and debugfs now correctly support e2image files for file
systems that have the meta_bg option enabled.
E2fsck and debugfs now correctly handle delete inodes (including
processing the orphaned inode list in the case of e2fsck) for bigalloc
file systems. (Addresses Google Bug: #
73795618)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Thu, 29 Mar 2018 13:58:14 +0000 (15:58 +0200)]
sngrep: fix libgcrypt handling
Fixes:
http://autobuild.buildroot.net/results/
f1c6494133806b9fc26ae3ce9e9c6a22fa2eda6f/
Commit
6205b75873c (sngrep: gnutls support also needs libgcrypt) ensured
that --with-gnutls is only used when both gnutls and libgcrypt are enabled,
but it didn't ensure libgcrypt gets built before sngrep or told the
configure script where to find libgcrypt-config, breaking the build.
Fix both issues.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Wed, 28 Mar 2018 22:12:01 +0000 (01:12 +0300)]
gawk: bump to version 4.2.1
Enable static build. gawk builds statically just fine. The shared
library check has been removed in 4.1.1.
Remove the symlink force hunk from the no-versioned patch. The only user
of LN is in the part that this patch disables.
Add license file hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Thu, 29 Mar 2018 15:27:05 +0000 (17:27 +0200)]
package/php: security bump to version 7.2.4
Fixes https://bugs.php.net/bug.php?id=75605, no CVE-ID yet.
Removed patch 0008, applied upstream. Re-numbered patch 0009.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Wed, 28 Mar 2018 21:14:01 +0000 (00:14 +0300)]
time: bump to version 1.9
Fix seed variable name for the wait3 system call AC_TRY_RUN test.
Remove manual installation; not needed anymore.
Cc: Will Newton <will.newton@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Tue, 27 Mar 2018 21:37:50 +0000 (23:37 +0200)]
cjson: bump to version 1.7.5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Wed, 28 Mar 2018 18:16:43 +0000 (20:16 +0200)]
package/{mesa3d, mesa3d-headers}: bump version to 18.0.0
Rebased 0002-Fix-endianess-detection-with-musl-based-toolchains.patch
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabio Estevam [Thu, 29 Mar 2018 11:31:00 +0000 (08:31 -0300)]
linux-headers: bump 4.{1, 4, 9, 14, 15}.x series
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabio Estevam [Thu, 29 Mar 2018 11:30:59 +0000 (08:30 -0300)]
linux: bump default to version 4.15.14
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Seiderer [Wed, 21 Mar 2018 20:23:12 +0000 (21:23 +0100)]
modem-manager: remove wrong gnutls dependency comment
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Acked-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Mon, 26 Mar 2018 20:23:02 +0000 (23:23 +0300)]
xerces: add upstream security fix
CVE-2017-12627: dereference of a NULL pointer while processing the path
to the DTD.
xerces 3.2.1 includes this patch. But this version also added
AC_RUN_IFELSE to its configure script, making cross compilation harder.
Switching to cmake is also problematic since the minimum required cmake
version is 3.2.0. The host dependencies check currently allows minimum
cmake version 3.1.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Sun, 11 Mar 2018 09:09:33 +0000 (10:09 +0100)]
ympd: add optional openssl dependency
Fixes:
- http://autobuild.buildroot.net/results/
d9b1375f5f8ecde8fef027344a5d5b288f7cee7c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Fri, 9 Mar 2018 18:05:51 +0000 (19:05 +0100)]
libcdio: bump to version 2.0.0
Add license hash
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Carlos Santos [Sun, 28 Jan 2018 04:43:58 +0000 (02:43 -0200)]
lshw: use data files provided by hwdata
lshw is seldomly released, so its data files become easily
outdated. Instead, this commit makes use of the data files provided by
hwdata. This is easily possible because lshw looks for the files in
several directories, including /usr/share/hwdata, where the hwdata
collection is installed.
We remove the entire /usr/share/lshw directory, where the not very
up-to-date data files where installed. Four files were installed
there: pci.ids, usb.ids (which are now provided by hwdata), manuf.txt
and oui.txt (which are not used at run time).
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas:
- rework commit log
- replace patch by a simple removal of the /usr/share/lshw directory
- add "runtime" comment in Config.in for the BR2_PACKAGE_LSHW
dependency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Chris Lesiak [Tue, 23 Jan 2018 23:20:05 +0000 (17:20 -0600)]
package/avahi: Add sysusers.d snippet
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
projects / buildroot.git / log