daily update

gas: blackfin: docs: typo fixes and fill out directive info

A bunch of Blackfin-specific directives were lacking info on what they
actually do, so fill in the blanks.  Further, the byte2/byte4 descriptions
were swapped.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

gas: blackfin: reject FP/SP with TESTSET

The TESTSET insn does not work with the FP/SP Pregs, so reject them.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

opcodes: blackfin: constify register names

Constify the array itself since it need not be writable.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

opcodes: blackfin: add multiple inclusion protection

Prevent build errors if the header happens to be included multiple times.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

* infrun.c (proceed): Move switching out and in of tfind mode from
here ...
(fetch_inferior_event): ... to here.

2011-02-11  Yao Qi  <yao@codesourcery.com>

* Makefile.in: Remove signals.o from COMMON_OBS.  Link
libcommon.a.
* configure.ac: Add common to sub dir.
* configure: Regenerate.

common/
2011-02-11  Yao Qi  <yao@codesourcery.com>

Build libcommon.a.

* Makefile.in: New.
* configure.ac: New.
* aclocal.m4: New.
* configure: Generate.

gdbserver/
2011-02-11  Yao Qi  <yao@codesourcery.com>

* configure.ac: Call AC_PROG_RANLIB.
* Makefile.in: Remove signals.o from OBS.  Link libcommon.a.
* configure: Regenerate.

*** empty log message ***

daily update

* doc/c-ppc.texi (PowerPC-Opts <-nops>): Clarify.

Fix whitespace.

* vec.h (VEC_block_remove): Place VEC_ASSERT_INFO on the right
side of the parenthesis.

Merge from GCC:
2010-07-13  Jakub Jelinek  <jakub@redhat.com>
        * vec.h (VEC_block_remove): Fix comment.

2011-02-10  Kai Tietz  <kai.tietz@onevision.com>

        * gas/cfi/cfi-x86_64.d: Adjust for x64 PE+.

* doc/as.texinfo (Overview): Add missing markup around Blackfin
and PowerPC options.

* config/tc-ppc.c (md_show_usage): Remove -l and -b.  Add -K PIC.
* doc/as.texinfo: Refer to and include c-ppc.texi for PowerPC options.
(Overview <Target PowerPC options>): Add a number of missing options.
* doc/c-ppc.texi: Likewise.  Add markup for use in manpage generation.

* gas/m68k/cpu32.d: Set explicit architecture for objdump.
* gas/m68k/mcf-coproc.d: Likewise.
* gas/m68k/mcf-wdebug.d: Likewise.

remove accidental SANE_EXPR change

* scripttempl/armbpabi.sc: Revert 2010-11-02  H.J. Lu.
* scripttempl/avr.sc: Likewise.
* scripttempl/elf32cr16.sc: Likewise.
* scripttempl/elf32crx.sc: Likewise.
* scripttempl/elf32msp430.sc: Likewise.
* scripttempl/elf32msp430_3.sc: Likewise.
* scripttempl/elf32sh-symbian.sc: Likewise.
* scripttempl/elf64hppa.sc: Likewise.
* scripttempl/elf_chaos.sc: Likewise.
* scripttempl/elfd10v.sc: Likewise.
* scripttempl/elfd30v.sc: Likewise.
* scripttempl/elfi370.sc: Likewise.
* scripttempl/elfm68hc11.sc: Likewise.
* scripttempl/elfm68hc12.sc: Likewise.
* scripttempl/elfxtensa.sc: Likewise.
* scripttempl/ip2k.sc: Likewise.
* scripttempl/iq2000.sc: Likewise.
* scripttempl/mep.sc: Likewise.
* scripttempl/mmo.sc: Likewise.
* scripttempl/v850.sc: Likewise.
* scripttempl/xstormy16.sc: Likewise.
* scripttempl/elf.sc: Revert 2010-10-29  H.J. Lu.

* ld-scripts/defined.exp: Don't run defined5 for AOUT.
* ld-scripts/defined5.s: Use .text for "defined" section.
* ld-scripts/defined5.t: Adjust.

* ld-gc/start.d: Exclude frv-*-linux*.
* ld-misc/defsym1.d: Likewise.

* gas/elf/dwarf2-4.s: Don't use @.

PR gold/12316
* object.h (class Sized_relobj): Remove clear_local_symbols.
* reloc.cc (Sized_relobj::do_relocate): Don't call
clear_local_symbols.

*** empty log message ***

daily update

2011-02-09  Michael Snyder  <msnyder@vmware.com>

* i386-dis.c (OP_J): Parenthesize expression to prevent
truncated addresses.
(print_insn): Fix indentation off-by-one.

* ld-elfvsb/elfvsb.exp: Don't run any non-PIC tests on powerpc*-linux.
* ld-gc/gc.exp: Ensure powerpc64 test continues to fail.
* ld-srec/srec.exp: Don't edit toc on powerpc64.

* elf64-ppc.c (ppc64_elf_edit_toc): Don't free toc relocs until
we are done.  When optimising large toc, check that a global
symbol on a toc reloc is defined in a kept section.

*** empty log message ***

daily update

2011-02-08  Michael Snyder  <msnyder@vmware.com>

* linux-nat.c (linux_nat_filter_event): Fix typo in comment.

Use f32_patt in i386_align_code  when tuning for i686.

gas/

2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>

PR gas/6957
* config/tc-i386.c (i386_align_code): Use f32_patt when tuning
for i686.

gas/testsuite/

2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>

PR gas/6957
* gas/i386/nops-1-i686.d: Updated.
* gas/i386/nops-3-i686.d: Likewise.
* gas/i386/nops-4-i686.d: Likewise.

Also update cpu_arch_isa_flags for ISA extensions.

gas/

2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (set_cpu_arch): Also update cpu_arch_isa_flags
for ISA extensions.
(md_parse_option): Likewise.

gas/testsuite/

2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/i386.exp: Run nops-4a-i686 and nops-6.

* gas/i386/nops-4a-i686.d: New.
* gas/i386/nops-6.d: Likewise.
* gas/i386/nops-6.s: Likewise.

gdb/
* i386-tdep.c (i386_process_record): Rename l suffixes to d suffixes
in comments for pcmpgtd, pcmpeqd, psubd, paddd, pcmpgtd, pcmpeqd,
psubd and paddd.

gdb/
PR 12361.
* i386-tdep.c (i386_process_record) <0x660f3807>: Fix the comment to
phsubsw.
(i386_process_record) <lddqu>: Fix the opcode to 0xf20ff0.
(i386_process_record) <0x0f3807>: Fix the comment to phsubsw.

include/ChangeLog:

* dwarf2.h (enum dwarf_calling_convention): Add DW_CC_GDB_IBM_OpenCL.

gdb/ChangeLog:

* dwarf2read.c (read_subroutine_type): Set special calling
convention flag for functions compiled by IBM XL C for OpenCL.
* ppc-sysv-tdep.c: Include "dwarf2.h"
(ppc_sysv_abi_push_dummy_call): Implement IBM OpenCL vector types
calling convention.
(do_ppc_sysv_return_value): Add FUNC_TYPE argument.  Implement
IBM OpenCL vector types calling convention.
(ppc_sysv_abi_return_value): Pass through FUNC_TYPE.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_push_dummy_call): Implement IBM OpenCL vector
types calling convention.
(ppc64_sysv_abi_return_value): Likewise.
* spu-tdep.c: Include "dwarf2.h"
(spu_return_value): Implement IBM OpenCL vector types calling
convention.

gdb/testsuite/ChangeLog:

* gdb.opencl/callfuncs.cl: New file.
* gdb.opencl/callfuncs.exp: New test.
* gdb.opencl/Makefile.in (EXECUTABLES): Add callfuncs.

ChangeLog:

* ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Implement
correct ABI for AltiVec vector arguments.

testsuite/ChangeLog:

* gdb.arch/altivec-abi.c (vec_func): Make use of intv_on_stack_f
when computing result.
* gdb.arch/altivec-abi.exp: Update expected results.

PR binutils/12467
* readelf.c (process_program_headers): Issue a warning if there
are no program headers but the file header has a non-zero program
header offset.
(process_section_headers): Issue a warning if there are no section
headers but the file header has a non-zero section header offset.
(process_section_groups): Reword the no section message so that it
can be distinguished from the one issued by process_section_headers.

* elf.c (assign_file_positions_for_load_sections): Set the program
header offset and entry size to zero if there are no program
headers.

2010-02-08  Rafael Ávila de Espíndola <respindola@mozilla.com>

* plugin.cc (is_visible_from_outside): Return true for symbols
in the -u option.

* elf64-ppc.c (ppc64_elf_edit_toc): Don't segfault on NULL
local_syms when looking for local symbols in .toc.

*** empty log message ***

daily update

* valprint.c (val_print): Extend comment.
* ada-valprint.c (ada_valprint): Rewrite comment deferring
interface explanation to val_print.
(ada_val_print_array): Adjust comment to current interface.
(print_field_values): Adjust comment to current interface.
* c-valprint.c (c_val_print): Rewrite comment deferring interface
explanation to val_print.
* f-valprint.c (f_val_print): Ditto.
* jv-valprint.c (java_val_print): Ditto.
* m2-valprint.c (m2_val_print): Ditto.
* p-valprint.c (pascal_val_print): Ditto.

* gdb.base/break-interp.exp: Remove ${objdir} from test messages.
* gdb.base/jit.exp: Likewise.
* gdb.base/pie-execl.exp: Likewise.
* gdb.base/solib-nodir.exp: Likewise.
* gdb.base/solib-overlap.exp: Likewise.

* breakpoint.c (parse_breakpoint_sals): Fix description.

gdb/server/
* server.c (gdb_read_memory): Change return semantics to allow
partial transfers.
(handle_search_memory_1): Adjust.
(process_serial_event) <'m' packet>: Handle partial transfers.
* tracepoint.c (traceframe_read_mem): Handle partial transfers.

gdb/testsuite/
* gdb.trace/collection.c (global_pieces): New.
* gdb.trace/collection.exp (gdb_collect_global_in_pieces_test):
New procedure.
(gdb_trace_collection_test): Call it.

PR gas/3041
* gas/m68k/p3041pcrel.s, * gas/m68k/p3041pcrel.d: New test.
* gas/m68k/all.exp: Add "p3041pcrel" and enable p3041 tests for
all m68k-aout targets.

*** empty log message ***

PR gprof/12468
* corefile.c (core_create_function_syms): Set is_func for targets
that have no BSF_FUNCTION syms.

daily update

*** empty log message ***

daily update

Add the file that prev commit forget.

* symtab.cc (Odr_violation_compare::operator()): Sort by just the
filename.

*** empty log message ***

daily update

Add Python support for GDB events.

2011-02-04  Sami Wagiaalla  <swagiaal@redhat.com>

* gdb.python/py-evthreads.c: New file.
* gdb.python/py-evthreads.exp: New file.
* gdb.python/py-events.py: New file.
* gdb.python/py-events.exp: New file.
* gdb.python/py-events.c: New file.

2011-02-04  Sami Wagiaalla  <swagiaal@redhat.com>
                Oguz Kayral <oguzkayral@gmail.com>

* python/py-inferior.c (python_on_normal_stop): New function.
(python_on_resume): New function.
(python_inferior_exit): New function.
(gdbpy_initialize_inferior): Add normal_stop, target_resumed, and
inferior_exit observers.
* python/py-evtregistry.c: New file.
* python/py-threadevent.c : New file.
* python/py-event.c: New file.
* python/py-evts.c: New file.
* python/py-continueevent.c: New file.
* python/py-bpevent.c: New file.
* python/py-signalevent.c: New file.
* python/py-exetiedevent.c: New file.
* python/py-breakpoint.c (gdbpy_breakpoint_from_bpstats): New function.
Move struct breakpoint_object from here...
* python/python-internal.h: ... to here.
* python/py-event.h: New file.
* python/py-events.h: New file.
* Makefile.in (SUBDIR_PYTHON_OBS): Add py-breakpointstopevent.o,
py-continueevent.o, py-event.o, py-eventregistry.o, py-events.o,
py-exitedevent.o, py-signalstopevent.o, and py-stopevent.o.
(SUBDIR_PYTHON_SRCS): Add py-breakpointstopevent.c,
py-continueevent.c, py-event.c, py-eventregistry.c, py-events.c,
py-exitedevent.c, py-signalstopevent.c, and py-stopevent.c.
Add build rules for all the above.

* dwarf2read.c (dwarf2_section_empty_p): New function.
(dwarf2_read_section): Use dwarf2_section_empty_p.
(dwarf2_section_size): New function.
(dwarf2_get_section_info): Unconditionally read section.
(dwarf2_read_index): Use dwarf2_section_empty_p.
(partial_read_comp_unit_head): Use dwarf2_section_size.
(dwarf2_symbol_mark_computed): Likewise.

* gdbint.texinfo (Formatting): Mention some formatting guidelines
for casts and unary operators.

2011-02-04 David Daney <ddaney@caviumnetworks.com>

* NEWS: Add item for "catch syscall" on mips*-linux* targets.

* gdb.texinfo (GDB/MI Async Records): Document that symbols-loaded
is not useful.

gdb/
2011-02-04 David Daney <ddaney@caviumnetworks.com>

* mips-linux-tdep.c: Include xml-syscall.h.
(mips_linux_get_syscall_number): New function.
(mips_linux_init_abi): Add calls to
mips_linux_get_syscall_number() and set_xml_syscall_file_name().
* data-directory/Makefile.in (SYSCALLS_FILES): Add
mips-o32-linux.xml, mips-n32-linux.xml and mips-n64-linux.xml
* syscalls/mips-n32-linux.xml: New file.
* syscalls/mips-n64-linux.xml: New file.
* syscalls/mips-o32-linux.xml: New file.
gdb/testsuite/
2011-02-04 David Daney <ddaney@caviumnetworks.com>

* gdb.base/catch-syscall.exp: Enable for mips*-linux*.

* dwarf2read.c (dwarf2_ranges_read): Skip empty range entries.
Complain about inverted range entries.
(dwarf2_record_block_ranges): Likewise.

Fix some typos.
* breakpoint.c (update_watchpoint): Fix name of the
update_global_location_list function.
(print_one_breakpoint): Fix typo.
(_initialize_breakpoint): Remove extra space in hbreak help
string.
* breakpoint.h (struct bp_location) <length>: Fix field
description.

* regcache.c (registers_changed_ptid): Don't explictly always
clear `current_regcache'.  Only clear current_thread_ptid and
current_thread_arch when PTID matches.  Only reinit the frame
cache if PTID matches the current inferior_ptid.  Move alloca(0)
call to ...
(registers_changed): ... here.

*** empty log message ***

gas/
* doc/as.texinfo (Target TIC6X options): Don't mention "-matomic".
* doc/c-tic6x.texi (TIC6X Directives): Don't mention ".atomic".
(TIC6X Options): Don't mention "-matomic".
* config/tc-tic6x.c (OPTION_MATOMIC, OPTION_MNO_ATOMIC): Delete.
(md_longopts): Remove corresponding entries.
(md_parse_option): Don't handle them.
(md_show_usage): Don't document them.
(tic6x_atomic): Delete variable.
(tic6x_update_features): Always copy tic6x_arch_enable to
tic6x_features.
(tic6x_arch_enable): Remove references to TIC6X_INSN_ATOMIC.
(s_tic6x_atomic, s_tic6x_noatomic): Remove functions.
(md_pseudo_table): Remove ".atomic" and ".noatomic".

gas/testsuite/
* gas/tic6x/dir-junk.l: Remove tests for .atomic and .noatomic.
* gas/tic6x/dir-junk.s: Likewise.
* gas/tic6x/insns-c674x-bad.d: Remove test.
* gas/tic6x/insns-c674x-bad.l: Likewise.
* gas/tic6x/insns-atomic.d: Remove "-matomic" switch.

include/opcode/
* tic6x-opcode-table.h (cmtl, ll, sl): Available on C64XP.
* tic6x.h (TIC6X_INSN_ATOMIC): Remove.

daily update

* arm-tdep.c (arm_skip_stack_protector): Accept any symbol that
starts with __stack_chk_guard as stack guard symbol.

sourceware.org/ml/gdb-patches/2010-12/msg00300.html
Improve the ordering of line table entries when dealing with the end
of sequence markers.  This will allow us to disassemble over the border
between two compile units while also displaying source code information.

libiberty: documentation markup and order fixes.

libiberty/:
* splay-tree.c: Escape wrapping newlines in texinfo markup
with '@', to fix function declaration output rendering.
* gather-docs: Relax and improve macro name matching to actually
match all current names and to allow input line wrapping.
* bsearch.c, concat.c, crc32.c, fnmatch.txh, fopen_unlocked.c,
hashtab.c, insque.c, make-relative-prefix.c, memchr.c, memcmp.c,
memcpy.c, memmem.c, memmove.c, mempcpy.c, memset.c,
pexecute.txh, random.c, setenv.c, setproctitle.c,
simple-object.txh, snprintf.c, stpncpy.c, strncmp.c, strtod.c,
strtol.c, vasprintf.c, vprintf.c, vsnprintf.c, xmemdup.c:
Wrap long texinfo input lines.
* functions.texi: Regenerate.

*** empty log message ***

daily update

2011-02-02  Sriraman Tallam  <tmsriram@google.com>

* icf.h (is_section_foldable_candidate): Change type of parameter
        to std::string.
* icf.cc (Icf::find_identical_sections): Change type of local variable
        section_name to be std::string.
(is_function_ctor_or_dtor): Change type of parameter to std::string.

* arm-tdep.c (skip_prologue_function): Add GDBARCH and IS_THUMB
arguments.  Skip in-prologue calls to glibc __aeabi_read_tp
implementation even if no symbols are available.
(thumb_analyze_prologue): Update call to skip_prologue_function.
(arm_analyze_prologue): Likewise.

* arm-tdep.c: Include "observer.h".
(arm_prologue_this_id): Use frame PC if get_frame_func returns 0.
(arm_exidx_data_key): New static variable.
(struct arm_exidx_entry, arm_exidx_entry_s): New data types.
(struct arm_exidx_data): Likewise.
(arm_exidx_data_free): New function.
(arm_compare_exidx_entries): Likewise.
(arm_obj_section_from_vma): Likewise.
(arm_exidx_new_objfile): Likewise.
(arm_find_exidx_entry): Likewise.
(arm_exidx_fill_cache): Likewise.
(arm_exidx_unwind_sniffer): Likewise.
(arm_exidx_unwind): New global variable.
(arm_gdbarch_init): Append unwinder arm_exidx_unwind.
(_initialize_arm_tdep): Attach arm_exidx_new_objfile to new_objfile
observer.  Register arm_exidx_data_key as objfile data.

* arm-tdep.c (arm_analyze_load_stack_chk_guard): Avoid build break
due to accessing uninitialized variable.  Fix indentation.

gdb/
* c-valprint.c (c_value_print): When doing virtual base pointer
adjustment, create a new value with adjusted contents rather than
changing the contents of the value being printed (and getting it
wrong).

gdb/testsuite/
* gdb.cp/virtbase.cc (VirtualBase, VirtualMiddleA, VirtualMiddleB)
(Virtual): New structs.
(virtual_o, virtual_middle_b): New globals.
* gdb.cp/virtbase.exp: New tests.

* xml-support.c (xml_find_attribute): New.
(xinclude_start_include): Use it.
* xml-support.h (xml_find_attribute): Declare.
* memory-map.c (memory_map_start_memory)
(memory_map_start_property): Use xml_find_attribute.
* osdata.c (osdata_start_osdata, osdata_start_column): Use
xml_find_attribute.
* remote.c (start_thread): Use xml_find_attribute.
* solib-target.c (library_list_start_segment)
(library_list_start_section, library_list_start_library)
(library_list_start_list): Use xml_find_attribute.
* xml-tdesc.c (tdesc_start_target, tdesc_start_feature)
(tdesc_start_union, tdesc_start_struct, tdesc_start_flags)
(tdesc_start_field): Use xml_find_attribute.

* opencl-lang.c (STRINGIFY): Rename to OCL_STRING.
(BUILD_OCL_VTYPES): Update.

fix gdb+python build failure if using non-GNU sed

Non-GNU sed do not like the '?' quantifier when used in a s/// regexp
that involve back-references, causing the build to fail when trying
to link with Python support. This fixes it by using the '*' quantifier
instead.

gdb/ChangeLog:

  * configure.ac: Work around non-GNU sed limitation when computing
  python version number.
  * configure: Regenerate.

*** empty log message ***

daily update

gdb/
Fix debug printing of TYPE_INSTANCE.
* expprint.c (print_subexp_standard) <TYPE_INSTANCE>: New.
(dump_subexp_body_standard) <TYPE_INSTANCE>: New.

gdb/
Fix debug printing of BINOP_IN, OP_OBJC_MSGCALL,
OP_F77_UNDETERMINED_ARGLIST, OP_COMPLEX, OP_OBJC_SELECTOR, OP_NAME,
OP_OBJC_NSSTRING, OP_F90_RANGE and OP_DECFLOAT.
* ada-operator.inc: Rename the file to ...
* ada-operator.def: ... here, wrap all the entries by macro OP.
* expprint.c (op_name_standard): Remove all the entries.  Include
"std-operator.def" instead.
* expression.h (enum exp_opcode): Include "std-operator.def" and
"ada-operator.def".  Move all the entries ...
* std-operator.def: ... here, wrap all the entries by macro OP.

Updated Danish translation.

*** empty log message ***

daily update

* elf64-ppc.c (ppc64_elf_next_input_section): Use elf_gp value
for toc pointer on any section having makes_toc_func_call set.
(check_pasted_section): Ensure pasted .init/.fini fragments use
the same toc if any has makes_toc_func_call set.

2011-01-31  Paul Pluzhnikov  <ppluzhnikov@google.com>

* gdb.base/jit.exp: New file.
* gdb.base/jit-main.c: New file.
* gdb.base/jit-solib.c: New file.

2011-01-31  Paul Pluzhnikov  <ppluzhnikov@google.com>

* breakpoint.h (remove_jit_event_breakpoints): New prototype.
* breakpoint.c (remove_jit_event_breakpoints): New function.
* jit.c (jit_descriptor_addr): Delete.
(registering_code): Delete.
(clear_int): Delete.
(jit_inferior_data): New variable.
(struct jit_inferior_data): New type.
(get_jit_inferior_data): New function.
(jit_inferior_data_cleanup): New function.
(jit_read_descriptor): Adjust.
(jit_register_code): Adjust.
(jit_breakpoint_re_set_internal): New function; move code here ...
(jit_inferior_init): ... from here.
(jit_breakpoint_re_set): Adjust.
(jit_reset_inferior_data_and_breakpoints): New function.
(jit_inferior_created_observer): Adjust.
(jit_inferior_exit_hook): Adjust.
(jit_executable_changed_observer): New function.
(jit_event_handler): Adjust.
(_initialize_jit): Adjust.

2011-01-31  Paul Pluzhnikov  <ppluzhnikov@google.com>

* breakpoint.h (remove_jit_event_breakpoints): New prototype.
* breakpoint.c (remove_jit_event_breakpoints): New function.
* jit.c (jit_descriptor_addr): Delete.
(registering_code): Delete.
(clear_int): Delete.
(jit_inferior_data): New variable.
(struct jit_inferior_data): New type.
(get_jit_inferior_data): New function.
(jit_inferior_data_cleanup): New function.
(jit_read_descriptor): Adjust.
(jit_register_code): Adjust.
(jit_breakpoint_re_set_internal): New function; move code here ...
(jit_inferior_init): ... from here.
(jit_breakpoint_re_set): Adjust.
(jit_reset_inferior_data_and_breakpoints): New function.
(jit_inferior_created_observer): Adjust.
(jit_inferior_exit_hook): Adjust.
(jit_executable_changed_observer): New function.
(jit_event_handler): Adjust.
(_initialize_jit): Adjust.

2011-01-31  Michael Snyder  <msnyder@vmware.com>

* m32r-tdep.c (m32r_gdbarch_init): Replace accidentally deleted
line.

* gdb.opencl/convs_casts.exp: Use tbreak instead of break to
proceed to initial kernel entry point.
* gdb.opencl/datatypes.exp: Likewise.
* gdb.opencl/operators.exp: Likewise.
* gdb.opencl/vec_comps.exp: Likewise.

Added new namespace tests.

2011-01-31  Sami Wagiaalla  <swagiaal@redhat.com>

* gdb.cp/nsnested.cc: New.
* gdb.cp/nsnested.exp: New.
* gdb.cp/nsnoimports.exp: New.
* gdb.cp/nsnoimports.cc: New.

PR python/12216:
* python/python.c (execute_gdb_command): Call
prevent_dont_repeat.
* top.c (suppress_dont_repeat): New global.
(dont_repeat): Use it.
(prevent_dont_repeat): New function.
* command.h (prevent_dont_repeat): Declare.

* write.c (write_contents): Include output file name and bfd error
value when reporting the inability to write to the output file.
* config/tc-rx.c (rx_handle_align): Do not insert NOPs into align
frag that has a non-zero fill value.

* gas/all/align.d: Skip for the RX.
* gas/elf/group1a.d: Likewise.
* gas/elf/groupautoa.d: Likewise.
* gas/elf/elf.exp: Do not run section5 test for the RX port.
* gas/elf/section4.d: Likewise.
* gas/elf/section7.d: Likewise.
* gas/macros/semi.s: Fill with a non-zero pattern.
* gas/macros/semi.d: Expect non-zero fill value.
* gas/rx/bcnd.d: Update expected disassembly.
* gas/rx/bra.d: Likewise.
* gas/rx/macros.inc: Add reg1 macro.
* gas/rx/max.sm: Use reg1 macro to avoid generating illegal NOP
instruction.
* gas/rx/mov.sm: Likewise.
* gas/rx/max.d: Update expected disassembly.
* gas/rx/mov.d: Likewise.
* gas/rx/rx-asm-good.s: Use Renesas section names.
* gas/rx/rx-asm-good.d: Update expected disassembly.

* infcmd.c (finish_backward): Use breakpoint_set_silent.
* python/py-breakpoint.c (bppy_set_silent): Use
breakpoint_set_silent.
(bppy_set_thread): Use breakpoint_set_thread.
(bppy_set_task): Use breakpoint_set_task.
* breakpoint.h (breakpoint_set_silent, breakpoint_set_thread)
(breakpoint_set_task): Declare.
(make_breakpoint_silent): Remove.
* breakpoint.c (breakpoint_set_silent): New function.
(breakpoint_set_thread): Likewise.
(breakpoint_set_task): Likewise.
(make_breakpoint_silent): Remove.

* breakpoint.h (user_breakpoint_p): Declare.
* breakpoint.c (user_breakpoint_p): New function.
(breakpoint_1): Use it.
(save_breakpoints): Likewise.

PR libgcj/44341
* configure.ac: Discard --with-* flags for host when configuring
target libraries for cross build.
* configure: Rebuilt.

allow building GDB with Python support on MinGW

This makes several adjustements to the configure python-config.py
scripts to deal with the differences between a Unix install of Python
and a Windows install of Python (as downloaded from the Python website).

Differences:

  - The Python executable is directly in the python prefix directory
    as opposed to inside the bin/ subdirectory.

  - The name of the python library is does not have a dot in the version
    number: On Unix, we have libpython2.7, while on Windows, it's
    libpython27.  So the regexp extracting the python version from
    the Python lib filename had to be adjusted slightly.

    Also, the tests checking the name of the libpython had to be
    adjusted to allow for that.

  - There are no link options following the -lpython<version> switch
    on Windows, but the regexp extracting the python version was
    using it as a delimiter.  It had to be removed.

  - python-config.py does not work on Windows, mostly because
    some sysconfig variables are missing.  They are not necessary
    so the script was adapted to skip them if not defined.

  - The paths returned by python-config.py follow the Windows filename
    convention in terms of the directory separator, and this is causing
    trouble when the build environment is cygwin (while the compiler
    and Python are MinGW).  We could have fixed that in the configure
    script, but it felt simpler to do so in python-config.py

gdb/ChangeLog:

        * configure.ac: Add handling of Python distribution on Windows.
        * python-config.py: If the LIBS, SYSLIBS, LIBPL and/or LINKFORSHARED
        sysconfig variables are not defined, then do not use them.
        On Windows, if LIBPL is not defined, then use prefix + '/libs'
        instead.  On Windows, return all paths using forward-slashes
        rather than backslashes.