Andrew Burgess [Wed, 13 Feb 2019 17:10:18 +0000 (17:10 +0000)]
gdb/fortran: Additional builtin procedures
Add some additional builtin procedures for Fortran, these are MOD,
CEILING, FLOOR, MODULO, and CMPLX.
gdb/ChangeLog:
* f-exp.y (BINOP_INTRINSIC): New token.
(exp): New parser rule handling BINOP_INTRINSIC.
(f77_keywords): Add new builtin procedures.
* f-lang.c (evaluate_subexp_f): Handle BINOP_MOD, UNOP_FORTRAN_CEILING,
UNOP_FORTRAN_FLOOR, BINOP_FORTRAN_MODULO, BINOP_FORTRAN_CMPLX.
(operator_length_f): Handle UNOP_FORTRAN_CEILING,
UNOP_FORTRAN_FLOOR, BINOP_FORTRAN_MODULO, BINOP_FORTRAN_CMPLX.
(print_unop_subexp_f): New function.
(print_binop_subexp_f): New function.
(print_subexp_f): Handle UNOP_FORTRAN_CEILING, UNOP_FORTRAN_FLOOR,
BINOP_FORTRAN_MODULO, BINOP_FORTRAN_CMPLX.
(dump_subexp_body_f): Likewise.
(operator_check_f): Likewise.
* fortran-operator.def: Add UNOP_FORTRAN_CEILING, UNOP_FORTRAN_FLOOR,
BINOP_FORTRAN_MODULO, BINOP_FORTRAN_CMPLX
gdb/testsuite/ChangeLog:
* gdb.fortran/intrinsics.exp: Extend to cover MOD, CEILING, FLOOR,
MODULO, CMPLX.
Andrew Burgess [Mon, 1 Apr 2019 20:01:09 +0000 (21:01 +0100)]
gdb/fortran: Introduce fortran-operator.def file
Future commits will add more Fortran specific expression operators.
In preparation for these new operators, this commit adds a new
fortran-operator.def file similar to how GDB already has
ada-operator.def.
I've moved UNOP_KIND the Fortran specific operator I introduced in
commit
4d00f5d8f6c4 into this file, and renamed it to make it clearer
that the operator is Fortran specific. I've then updated the Fortran
exp_descriptor table (exp_descriptor_f) to use entirely Fortran
specific functions that now handle UNOP_FORTRAN_KIND (the new name for
UNOP_KIND).
There should be no visible changes for standard users after this
commit, though for developers, the output when 'set debug expression
1' is now better, before:
(gdb) p kind (l1)
Dump of expression @ 0x2ccc7a0, before conversion to prefix form:
Language fortran, 5 elements, 16 bytes each.
Index Opcode Hex Value String Value
0 OP_VAR_VALUE 42 *...............
1 OP_NULL
47730176 .N..............
2 BINOP_INTDIV
47729184 J..............
3 OP_VAR_VALUE 42 *...............
4 UNOP_KIND 78 N...............
Dump of expression @ 0x2ccc7a0, after conversion to prefix form:
Expression: `Invalid expression
(gdb)
and after:
(gdb) p kind (l1)
Dump of expression @ 0x294d0b0, before conversion to prefix form:
Language fortran, 5 elements, 16 bytes each.
Index Opcode Hex Value String Value
0 OP_VAR_VALUE 40 (...............
1 unknown opcode: 224
44088544 ................
2 unknown opcode: 208
44087504 ................
3 OP_VAR_VALUE 40 (...............
4 UNOP_FORTRAN_KIND 119 w...............
Dump of expression @ 0x294d0b0, after conversion to prefix form:
Expression: `KIND(test::l1)'
Language fortran, 5 elements, 16 bytes each.
0 UNOP_FORTRAN_KIND
1 OP_VAR_VALUE Block @0x2a0bce0, symbol @0x2a0b8d0 (l1)
$1 = 1
(gdb)
gdb/ChangeLog:
* gdb/expprint.c (dump_subexp_body_standard): Remove use of
UNOP_KIND.
* gdb/expression.h (exp_opcode): Include 'fortran-operator.def'.
* gdb/f-exp.y (exp): Rename UNOP_KIND to UNOP_FORTRAN_KIND.
* gdb/f-lang.c (evaluate_subexp_f): Likewise.
(operator_length_f): New fuction.
(print_subexp_f): New function.
(op_name_f): New function.
(dump_subexp_body_f): New function.
(operator_check_f): New function.
(exp_descriptor_f): Replace standard expression handling functions
with new functions.
* gdb/fortran-operator.def: New file.
* gdb/parse.c (operator_length_standard): Remove use of UNOP_KIND.
* gdb/std-operator.def: Remove UNOP_KIND.
Andrew Burgess [Sat, 30 Mar 2019 17:14:23 +0000 (17:14 +0000)]
gdb: Remove an unbalanced stray double quote from a comment
What appears to be a stray double quote character in std-operator.def
causes incorrect highlighting in my editor.
The quote was introduced in this commit:
commit
858be34c5a03bb8973679ebf00d360182434dc00
Date: Mon Sep 4 20:21:15 2017 +0100
Handle "p S::method()::static_var" in the C++ parser
I can't see any reason why the quote should be there, so this commit
removes it.
gdb/ChangeLog:
* std-operator.def: Remove unbalanced, stray double quote
character.
GDB Administrator [Tue, 30 Apr 2019 00:00:28 +0000 (00:00 +0000)]
Automatic date update in version.in
Andrew Burgess [Thu, 21 Mar 2019 15:13:23 +0000 (15:13 +0000)]
gdb: Introduce 'print max-depth' feature
Introduce a new print setting max-depth which can be set with 'set
print max-depth DEPTH'. The default value of DEPTH is 20, but this
can also be set to unlimited.
When GDB is printing a value containing nested structures GDB will
stop descending at depth DEPTH. Here is a small example:
typedef struct s1 { int a; } s1;
typedef struct s2 { s1 b; } s2;
typedef struct s3 { s2 c; } s3;
typedef struct s4 { s3 d; } s4;
s4 var = { { { { 3 } } } };
The following table shows how various depth settings affect printing
of 'var':
| Depth Setting | Result of 'p var' |
|---------------+--------------------------------|
| Unlimited | $1 = {d = {c = {b = {a = 3}}}} |
| 4 | $1 = {d = {c = {b = {a = 3}}}} |
| 3 | $1 = {d = {c = {b = {...}}}} |
| 2 | $1 = {d = {c = {...}}} |
| 1 | $1 = {d = {...}} |
| 0 | $1 = {...} |
Only structures, unions, and arrays are replaced in this way, scalars
and strings are not replaced.
The replacement is counted from the level at which you print, not from
the top level of the structure. So, consider the above example and
this GDB session:
(gdb) set print max-depth 2
(gdb) p var
$1 = {d = {c = {...}}}
(gdb) p var.d
$2 = {c = {b = {...}}}
(gdb) p var.d.c
$3 = {b = {a = 3}}
Setting the max-depth to 2 doesn't prevent the user from exploring
deeper into 'var' by asking for specific sub-fields to be printed.
The motivation behind this feature is to try and give the user more
control over how much is printed when examining large, complex data
structures.
The default max-depth of 20 means that there is a change in GDB's
default behaviour. Someone printing a data structure with 20 levels
of nesting will now see '{...}' instead of their data, they would need
to adjust the max depth, or call print again naming a specific field
in order to dig deeper into their data structure. If this is
considered a problem then we could increase the default, or even make
the default unlimited.
This commit relies on the previous commit, which added a new field to
the language structure, this new field was a string that contained the
pattern that should be used when a structure/union/array is replaced
in the output, this allows languages to use a syntax that is more
appropriate, mostly this will be selecting the correct types of
bracket '(...)' or '{...}', both of which are currently in use.
This commit should have no impact on MI output, expressions are
printed through the MI using -var-create and then -var-list-children.
As each use of -var-list-children only ever displays a single level of
an expression then the max-depth setting will have no impact.
This commit also adds the max-depth mechanism to the scripting
language pretty printers following basically the same rules as for the
built in value printing.
One quirk is that when printing a value using the display hint 'map',
if the keys of the map are structs then GDB will hide the keys one
depth level after it hides the values, this ensures that GDB produces
output like this:
$1 = map_object = {[{key1}] = {...}, [{key2}] = {...}}
Instead of this less helpful output:
$1 = map_object = {[{...}] = {...}, [{...}] = {...}}
This is covered by the new tests in gdb.python/py-nested-maps.exp.
gdb/ChangeLog:
* cp-valprint.c (cp_print_value_fields): Allow an additional level
of depth when printing anonymous structs or unions.
* guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer):
Don't print either the top-level value, or the children if the
max-depth is exceeded.
(ppscm_print_children): When printing the key of a map, allow one
extra level of depth.
* python/py-prettyprint.c (gdbpy_apply_val_pretty_printer): Don't
print either the top-level value, or the children if the max-depth
is exceeded.
(print_children): When printing the key of a map, allow one extra
level of depth.
* python/py-value.c (valpy_format_string): Add max_depth keyword.
* valprint.c: (PRINT_MAX_DEPTH_DEFAULT): Define.
(user_print_options): Initialise max_depth field.
(val_print_scalar_or_string_type_p): New function.
(val_print): Check to see if the max depth has been reached.
(val_print_check_max_depth): Define new function.
(show_print_max_depth): New function.
(_initialize_valprint): Add 'print max-depth' option.
* valprint.h (struct value_print_options) <max_depth>: New field.
(val_print_check_max_depth): Declare new function.
* NEWS: Document new feature.
gdb/doc/ChangeLog:
* gdb.texinfo (Print Settings): Document 'print max-depth'.
* guile.texi (Guile Pretty Printing API): Document that 'print
max-depth' can effect the display of a values children.
* python.texi (Pretty Printing API): Likewise.
(Values From Inferior): Document max_depth keyword.
gdb/testsuite/ChangeLog:
* gdb.base/max-depth.c: New file.
* gdb.base/max-depth.exp: New file.
* gdb.python/py-nested-maps.c: New file.
* gdb.python/py-nested-maps.exp: New file.
* gdb.python/py-nested-maps.py: New file.
* gdb.python/py-format-string.exp (test_max_depth): New proc.
(test_all_common): Call test_max_depth.
* gdb.fortran/max-depth.exp: New file.
* gdb.fortran/max-depth.f90: New file.
* gdb.go/max-depth.exp: New file.
* gdb.go/max-depth.go: New file.
* gdb.modula2/max-depth.exp: New file.
* gdb.modula2/max-depth.c: New file.
* lib/gdb.exp (get_print_expr_at_depths): New proc.
Andrew Burgess [Tue, 9 Apr 2019 22:06:41 +0000 (23:06 +0100)]
gdb: Introduce new language field la_is_string_type_p
This commit is preparation work for the next commit, and by itself
makes no user visible change to GDB. I've split this work into a
separate commit in order to make code review easier.
This commit adds a new field 'la_is_string_type_p' to the language
struct, this predicate will return true if a type is a string type for
the given language.
Some languages already have a "is this a string" predicate that I was
able to reuse, while for other languages I've had to add a new
predicate. In this case I took inspiration from the value printing
code for that language - what different conditions would result in
printing something as a string.
A default "is this a string" method has also been added that looks for
TYPE_CODE_STRING, this is the fallback I've used for a couple of
languages.
In this commit I add the new field and initialise it for each
language, however at this stage the new field is never used.
gdb/ChangeLog:
* ada-lang.c (ada_language_defn): Initialise new field.
* c-lang.c (c_is_string_type_p): New function.
(c_language_defn): Initialise new field.
(cplus_language_defn): Initialise new field.
(asm_language_defn): Initialise new field.
(minimal_language_defn): Initialise new field.
* c-lang.h (c_is_string_type_p): Declare new function.
* d-lang.c (d_language_defn): Initialise new field.
* f-lang.c (f_is_string_type_p): New function.
(f_language_defn): Initialise new field.
* go-lang.c (go_is_string_type_p): New function.
(go_language_defn): Initialise new field.
* language.c (default_is_string_type_p): New function.
(unknown_language_defn): Initialise new field.
(auto_language_defn): Initialise new field.
* language.h (struct language_defn) <la_is_string_type_p>: New
member variable.
(default_is_string_type_p): Declare new function.
* m2-lang.c (m2_language_defn): Initialise new field.
* objc-lang.c (objc_language_defn): Initialise new field.
* opencl-lang.c (opencl_language_defn): Initialise new field.
* p-lang.c (pascal_is_string_type_p): New function.
(pascal_language_defn): Initialise new field.
* rust-lang.c (rust_is_string_type_p): New function.
(rust_language_defn): Initialise new field.
Andrew Burgess [Tue, 26 Mar 2019 19:34:06 +0000 (19:34 +0000)]
gdb: Introduce new language field la_struct_too_deep_ellipsis
This commit is preparation work for a later commit, and by itself
makes no user visible change to GDB. I've split this work into a
separate commit in order to make code review easier.
This commit adds a new field 'la_struct_too_deep_ellipsis' to the
language struct, this string will be used in the next commit to print
a language specific string from within the generic value printing
code.
In this commit I add the new field and initialise it for each
language, however at this stage the new field is never used.
gdb/ChangeLog:
* language.h (struct language_defn) <la_struct_too_deep_ellipsis>:
New field.
* ada-lang.c (ada_language_defn): Initialise new field.
* c-lang.c (c_language_defn): Likewise.
(cplus_language_defn): Likewise.
(asm_language_defn): Likewise.
(minimal_language_defn): Likewise.
* d-lang.c (d_language_defn): Likewise.
* f-lang.c (f_language_defn): Likewise.
* go-lang.c (go_language_defn): Likewise.
* language.c (unknown_language_defn): Likewise.
(auto_language_defn): Likewise.
* m2-lang.c (m2_language_defn): Likewise.
* objc-lang.c (objc_language_defn): Likewise.
* opencl-lang.c (opencl_language_defn): Likewise.
* p-lang.c (pascal_language_defn): Likewise.
* rust-lang.c (rust_language_defn): Likewise.
Andrew Burgess [Wed, 10 Apr 2019 22:07:10 +0000 (23:07 +0100)]
gdb/ada: Update some predicate functions to return bool
A later commit would like to make use of a pointer to the function
ada_is_string_type, however, this will require the function to return
a bool (so the signature matches).
As the ada_is_string_type is a predicate function, and its return
value is only ever used as either true or false, then this commit
updates the function to return a bool.
As a consequence ada_is_character_type needs to change too.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* ada-lang.c (ada_is_character_type): Change return type to bool.
(ada_is_string_type): Likewise.
* ada-lang.h (ada_is_character_type): Update declaration
(ada_is_string_type): Likewise.
Tom de Vries [Mon, 29 Apr 2019 14:52:10 +0000 (16:52 +0200)]
[gdb/testsuite] Fix regexp in skip_opencl_tests
When running gdb-caching-proc.exp, if skip_opencl_tests fails like this:
...
(gdb) run
Starting program: \
build/gdb/testsuite/outputs/gdb.base/gdb-caching-proc/opencltest13530.x
CHK_ERR (clGetPlatformIDs (1, &platform, NULL), -1001)
src/gdb/testsuite/lib/opencl_hostapp.c:73 error: Unknown
[Inferior 1 (process 13600) exited with code 01]
(gdb)
skip_opencl_tests: OpenCL support not detected
...
then this regexp in skip_opencl_tests fails to match:
...
-re ".*$inferior_exited_re code.*${gdb_prompt} $" {
...
so instead we hit the default clause after a 30 seconds timeout. With the
iteration count set at 10, we end up taking 6 minutes to run this test-case.
Fix this by adding the missing "with" in the regexp, bring back the runtime to
half a minute.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-04-29 Tom de Vries <tdevries@suse.de>
* lib/opencl.exp (skip_opencl_tests): Add missing "with" in regexp.
John Darrington [Mon, 29 Apr 2019 14:05:54 +0000 (16:05 +0200)]
S12Z: Opcodes: Fix crash when trying to decode a truncated operation.
opcodes/
* s12z-opc.c (shift_discrim): Return OP_INVALID when reading fails.
gas/
* testsuite/gas/s12z/truncated.d: New file.
* testsuite/gas/s12z/truncated.s: New file.
* testsuite/gas/s12z/s12z.exp: Add new test.
GDB Administrator [Mon, 29 Apr 2019 00:00:32 +0000 (00:00 +0000)]
Automatic date update in version.in
Philippe Waroquiers [Sun, 28 Apr 2019 04:54:32 +0000 (06:54 +0200)]
Follow-up to Support style in 'frame|thread apply'
Fix build problem when configuring with guile.
Fix the forgotten copy of ChangeLog info to ChangeLog.
GDB Administrator [Sun, 28 Apr 2019 00:01:02 +0000 (00:01 +0000)]
Automatic date update in version.in
Philippe Waroquiers [Sat, 9 Mar 2019 22:55:44 +0000 (23:55 +0100)]
Have 'thread|frame apply' style their output.
'thread|frame apply CMD' launches CMD so that CMD output goes to a string_file.
This patch ensures that string_file for such CMD output contains
style escape sequences that 'thread|frame apply' will later on
output on the real terminal, so as to have CMD output properly styled.
The idea is to have the class ui_file having overridable methods
to indicate that the output to this ui_file should be done using
'terminal' behaviour such as styling.
Then these methods are overriden in string_file so that a specially
constructed string_file will get output with style escape sequences.
After this patch, the output of CMD by thread|frame apply CMD is styled
similarly as when CMD is launched directly.
Note that string_file (term_out true) could also support wrapping,
but this is not done (yet?).
Tested on debian/amd64.
gdb/ChangeLog
2019-04-27 Philippe Waroquiers <philippe.waroquiers@skynet.be>
Support style in 'frame|thread apply'
* gdbcmd.h (execute_command_to_string): New term_out parameter.
* record.c (record_start, record_stop): Update callers of
execute_command_to_string with false.
* ui-file.h (class ui_file): New term_out and can_emit_style_escape
methods.
(class string_file): New constructor with term_out parameter.
Override methods term_out and can_emit_style_escape. New member
term_out.
(class stdio_file): Override can_emit_style_escape.
(class tee_file): Override term_out and can_emit_style_escape.
* utils.h (can_emit_style_escape): Remove.
* utils.c (can_emit_style_escape): Likewise.
Update all callers of can_emit_style_escape (SOMESTREAM) to
SOMESTREAM->can_emit_style_escape.
* source-cache.c (source_cache::get_source_lines): Likewise.
* stack.c (frame_apply_command_count): Call execute_command_to_string
passing the term_out characteristic of the current gdb_stdout.
* thread.c (thr_try_catch_cmd): Likewise.
* top.c (execute_command_to_string): pass term_out parameter
to construct the string_file for the command output.
* ui-file.c (term_cli_styling): New function (most code moved
from utils.c can_emit_style_escape).
(string_file::string_file, string_file::can_emit_style_escape,
stdio_file::can_emit_style_escape, tee_file::term_out,
tee_file::can_emit_style_escape): New functions.
Philippe Waroquiers [Tue, 23 Apr 2019 21:43:24 +0000 (23:43 +0200)]
Implement show | set may-call-functions [on|off]
Inferior function calls are powerful but might lead to undesired
results such as crashes when calling nested functions (frequently
used in particular in Ada).
This implements a GDB setting to disable calling inferior functions.
Note: the idea is that if/when the 'slash command' patch is pushed,
that this setting can be changed e.g. by using the shortcut /c.
This is version 2 of the patch. It handles all the received comments,
mostly replace 'can-call' by 'may-call', and avoid using
'inferior function call' in factor of 'calling function in the program'.
2019-04-26 Philippe Waroquiers <philippe.waroquiers@skynet.be>
gdb/ChangeLog
* NEWS: Mention the new set|show may-call-functions.
* infcall.c (may_call_functions_p): New variable.
(show_may_call_functions_p): New function.
(call_function_by_hand_dummy): Throws an error if not
may-call-functions.
(_initialize_infcall): Call add_setshow_boolean_cmd for
may-call-functions.
gdb/testsuite/ChangeLog
* gdb.base/callexit.exp: Test may-call-functions off.
gdb/doc/ChangeLog
* gdb.texinfo (Calling): Document the new
set|show may-call-functions.
Andrew Bennett [Mon, 22 Apr 2019 22:12:09 +0000 (15:12 -0700)]
[MIPS] Add load-link, store-conditional paired instructions
Add several baseline MIPS32R6[1] and MIPS64R6[2] instructions
that were omitted from the initial spec. These instructions
are optional in implementations but not associated with any
ASE or pseudo-ASE. Their presence is indicated by the XNP bit
in the Config5 register.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 228-229, pp. 354-357.
[2] "MIPS Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 289-290 and pp. 458-460.
gas/
* config/tc-mips.c (macro) <M_LLWP_AB, M_LLDP_AB, M_SCWP_AB,
M_SCDP_AB>: New cases and expansions for paired instructions.
* testsuite/gas/mips/llpscp-32.s: New test source.
* testsuite/gas/mips/llpscp-64.s: Likewise.
* testsuite/gas/mips/llpscp-32.d: New test.
* testsuite/gas/mips/llpscp-64.d: Likewise.
* testsuite/gas/mips/mips.exp: Run the new tests.
* testsuite/gas/mips/r6.s: Add new instructions to test source.
* testsuite/gas/mips/r6-64.s: Likewise.
* testsuite/gas/mips/r6-64-n32.d: Check new instructions.
* testsuite/gas/mips/r6-64-n64.d: Likewise.
* testsuite/gas/mips/r6-n32.d: Likewise.
* testsuite/gas/mips/r6-n64.d: Likwwise.
* testsuite/gas/mips/r6.d: Likewise.
include/
* opcode/mips.h (M_LLWP_AB, M_LLDP_AB): New enum values.
(M_SCWP_AB, M_SCDP_AB): Likewise.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add llwp, lldp, scwp, scdp.
GDB Administrator [Sat, 27 Apr 2019 00:00:28 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Fri, 26 Apr 2019 17:19:53 +0000 (10:19 -0700)]
i386: Don't add 0x66 prefix to IRET for .code16gcc
The .code16gcc directive supports 16bit mode with 32-bit address. Since
IRET (opcode 0xcf) in 16bit mode returns from an interrupt in 16bit mode,
we shouldn't add 0x66 prefix for IRET.
PR gas/24485
* config/tc-i386.c (process_suffix): Don't add DATA_PREFIX_OPCODE
to IRET for .code16gcc.
* testsuite/gas/i386/jump16.s: Add IRET tests.
* testsuite/gas/i386/jump16.d: Updated.
H.J. Lu [Fri, 26 Apr 2019 14:52:00 +0000 (07:52 -0700)]
Don't complain undefined weak dynamic reference
When undefined non-weak references in IR objects are optimized out
by LTO, we can have weak dynamic referencs to symbols marked with
bfd_link_hash_undefined. We shouldn't complain such undefined weak
dynamic references.
bfd/
PR ld/24486
* elflink.c (elf_link_output_extsym): Don't complain undefined
weak dynamic reference.
ld/
PR ld/24486
* testsuite/ld-plugin/lto.exp: Run PR ld/24486 tests.
* testsuite/ld-plugin/pr24486a.c: New file.
* testsuite/ld-plugin/pr24486b.c: Likewise.
* testsuite/ld-plugin/pr24486c.c: Likewise.
Nick Clifton [Fri, 26 Apr 2019 14:29:39 +0000 (15:29 +0100)]
Updated Russian translation for the ld subdirectory.
* po/ru.po: Updated Russian translation.
Christopher Yeleighton [Fri, 26 Apr 2019 14:23:59 +0000 (15:23 +0100)]
Fix the hyphenation of word phrases such as "target specific" and "machine specific".
* ld.texi: Properly hyphenate the word "specific".
GDB Administrator [Fri, 26 Apr 2019 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in
Keith Seitz [Thu, 25 Apr 2019 20:05:51 +0000 (13:05 -0700)]
c++/24367: Infinite recursion of typedef substitution
This bug finds another usage where we end up segfaulting while
normalizing user input. inspect_type and replace_type recurse,
attempting to substitute the "real" symbol name for the typedef name.
However, since the both these names are the same, they keep calling
each other until the stack overflows.
A simple reproducer for it is given by
typedef struct foo foo;
int qux (foo *f) { return 0; }
(gdb) b qux(foo*)
Segmentation fault
inspect_type already contains some special handling to prevent a
similar situation from occurring with namespaces. I wonder, however,
whether we need be so pedantic about the exact nature of the substitution.
This patch implements this rather more aggressive assumption that these
substitutions should be avoided whenever the replacement symbol's name is
exactly the same as the one we're trying to substitute. [In the above
example, we're trying to substitute the tyepdef named "foo" with the symbol
named "foo" (a struct).]
gdb/ChangeLog:
PR c++/24367
* cp-support.c (inspect_type): Don't attempt substitutions
of symbol with the same name.
gdb/testsuite/ChangeLog:
PR c++/24367
* gdb.cp/meth-typedefs.cc (incomplete_struct)
(another_incomplete_struct, test_incomplete): New definitions.
(main): Use new definitions.
* gdb.cp/meth-typedefs.exp: Add new tests for `test_incomplete'
functions.
Tom Tromey [Wed, 24 Apr 2019 18:13:35 +0000 (12:13 -0600)]
Fix memory leak in exception code
PR gdb/24475 concerns a memory leak coming from gdb's exception
handling code.
The leak occurs because throw_exception_sjlj does not arrange to
destroy the exception object it is passed. However, because
gdb_exception has a destructor, it's undefined to longjmp in this
situation.
This patch fixes the problem by avoiding the need to run any
destructors in gdb_rl_callback_handler, by making the gdb_exception
"static".
gdb/ChangeLog
2019-04-25 Tom Tromey <tromey@adacore.com>
PR gdb/24475:
* event-top.c (gdb_rl_callback_handler): Make "gdb_rl_expt"
static.
Tom Tromey [Wed, 24 Apr 2019 12:50:06 +0000 (06:50 -0600)]
Make exception handling more efficient
This makes exception handling more efficient in a few spots, through
the use of const- and rvalue-references.
I wrote this patch by commenting out the gdb_exception copy
constructor and then examining the resulting error messages one by
one, introducing the use of std::move where appropriate.
gdb/ChangeLog
2019-04-25 Tom Tromey <tromey@adacore.com>
* xml-support.c (struct gdb_xml_parser) <set_error>: Take an
rvalue reference.
(gdb_xml_start_element_wrapper, gdb_xml_end_element_wrapper)
(gdb_xml_parser::parse): Use std::move.
* python/python-internal.h (gdbpy_convert_exception): Take a const
reference.
* python/py-value.c (valpy_getitem, valpy_nonzero): Use
std::move.
* python/py-utils.c (gdbpy_convert_exception): Take a const
reference.
* python/py-inferior.c (infpy_write_memory, infpy_search_memory):
Use std::move.
* python/py-breakpoint.c (bppy_set_condition, bppy_set_commands):
Use std::move.
* mi/mi-main.c (mi_print_exception): Take a const reference.
* main.c (handle_command_errors): Take a const reference.
* linespec.c (parse_linespec): Use std::move.
* infcall.c (run_inferior_call): Use std::move.
(call_function_by_hand_dummy): Use std::move.
* exec.c (try_open_exec_file): Use std::move.
* exceptions.h (exception_print, exception_fprintf)
(exception_print_same): Update.
* exceptions.c (print_exception, exception_print)
(exception_fprintf, exception_print_same): Change parameters to
const reference.
* event-top.c (gdb_rl_callback_read_char_wrapper): Update.
* common/new-op.c: Use std::move.
* common/common-exceptions.h (struct gdb_exception): Add move
constructor.
(struct gdb_exception_error, struct gdb_exception_quit, struct
gdb_quit_bad_alloc): Change constructor to move constructor.
(throw_exception): Change parameter to rvalue reference.
* common/common-exceptions.c (throw_exception): Take rvalue
reference.
* cli/cli-interp.c (safe_execute_command): Use std::move.
* breakpoint.c (insert_bp_location, location_to_sals): Use
std::move.
Tom Tromey [Wed, 24 Apr 2019 12:50:01 +0000 (06:50 -0600)]
Avoid undefined behavior in Guile exception handling
The Guile code will longjmp (via scm_throw) when an object requiring
destruction is on the stack. This is undefined behavior.
This changes this code to run any destructors in inner scopes, and to
pass a POD to gdbscm_throw_gdb_exception.
gdb/ChangeLog
2019-04-25 Tom Tromey <tromey@adacore.com>
* guile/scm-exception.c (gdbscm_scm_from_gdb_exception)
(gdbscm_throw_gdb_exception): Take a gdbscm_gdb_exception.
* guile/scm-block.c, guile/scm-breakpoint.c, guile/scm-cmd.c,
guile/scm-disasm.c, guile/scm-frame.c, guile/scm-lazy-string.c,
guile/scm-math.c, guile/scm-param.c, guile/scm-ports.c,
guile/scm-symbol.c, guile/scm-symtab.c, guile/scm-type.c,
guile/scm-value.c: Use unpack.
* guile/guile-internal.h (gdbscm_scm_from_gdb_exception): Take a
gdbscm_gdb_exception.
(gdbscm_throw_gdb_exception): Likewise.
(struct gdbscm_gdb_exception): New.
(unpack): New function.
(gdbscm_wrap): Use unpack.
Tom Tromey [Tue, 23 Apr 2019 13:29:49 +0000 (07:29 -0600)]
Make SJLJ exceptions more efficient
This changes the SJLJ exception handling code to be a bit more
efficient, by using rvalue references and move assignment when
possible.
Tested by the buildbot.
gdb/ChangeLog
2019-04-25 Tom Tromey <tromey@adacore.com>
* event-top.c (gdb_rl_callback_read_char_wrapper_noexcept)
(gdb_rl_callback_handler): Use std::move.
* common/common-exceptions.h (struct gdb_exception): Add move
assignment operator.
(throw_exception_sjlj): Change "exception" to const reference.
* common/common-exceptions.c (exceptions_state_mc_catch): Update.
(throw_exception_sjlj): Change "exception" to const reference.
Tom Tromey [Tue, 23 Apr 2019 21:31:07 +0000 (15:31 -0600)]
Remove exception_none
Now that gdb_exception has a constructor, there's no need for
exception_none. This patch removes it.
gdb/ChangeLog
2019-04-25 Tom Tromey <tromey@adacore.com>
* xml-support.c (gdb_xml_parser::gdb_xml_parser): Update.
* python/py-value.c (valpy_getitem, valpy_nonzero): Update.
* python/py-inferior.c (infpy_write_memory, infpy_search_memory):
Update.
* python/py-breakpoint.c (bppy_set_condition, bppy_set_commands):
Update.
* mi/mi-interp.c (mi_interp::exec): Update.
* linespec.c (parse_linespec): Update.
* infcall.c (run_inferior_call): Update.
* guile/scm-value.c (gdbscm_value_to_lazy_string): Update.
* guile/scm-symbol.c (gdbscm_lookup_symbol)
(gdbscm_lookup_global_symbol): Update.
* guile/scm-param.c (gdbscm_parameter_value): Update.
* guile/scm-frame.c (gdbscm_frame_read_register)
(gdbscm_frame_read_var): Update.
* guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Update.
* exec.c (try_open_exec_file): Update.
* event-top.c (gdb_rl_callback_read_char_wrapper_noexcept)
(gdb_rl_callback_handler): Update.
* common/common-exceptions.h (exception_none): Don't declare.
* common/common-exceptions.c (exception_none): Don't define.
(struct catcher) <exception>: Update.
* cli/cli-interp.c (safe_execute_command): Update.
* breakpoint.c (insert_bp_location, location_to_sals): Update.
Ali Tamur [Sat, 30 Mar 2019 02:29:24 +0000 (19:29 -0700)]
[PATCH] Support for DW_FORM_strx tag
DW_FORM_strx is the new name of DW_FORM_GNU_str_index in the Dwarf 5 standard.
This is a small step towards supporting Dwarf 5 in gdb.
Sergio Durigan Junior [Thu, 25 Apr 2019 18:26:18 +0000 (14:26 -0400)]
ChangeLog entries for the previous commit.
I forgot to include the ChangeLog entries in the commit
57e5e645010430b3d73f8c6a757d09f48dc8f8d5 ("Implement dump of mappings
with ELF headers by gcore").
Sergio Durigan Junior [Tue, 23 Apr 2019 22:17:57 +0000 (18:17 -0400)]
Implement dump of mappings with ELF headers by gcore
This patch has a long story, but it all started back in 2015, with
commit
df8411da087dc05481926f4c4a82deabc5bc3859 ("Implement support
for checking /proc/PID/coredump_filter"). The purpose of that commit
was to bring GDB's corefile generation closer to what the Linux kernel
does. However, back then, I did not implement the full support for
the dumping of memory mappings containing ELF headers (like mappings
of DSOs or executables). These mappings were being dumped most of
time, though, because the default value of /proc/PID/coredump_filter
is 0x33, which would cause anonymous private mappings (DSOs/executable
code mappings have this type) to be dumped. Well, until something
happened on binutils...
A while ago, I noticed something strange was happening with one of our
local testcases on Fedora GDB: it was failing due to some strange
build-id problem. On Fedora GDB, we (unfortunately) carry a bunch of
"local" patches, and some of these patches actually extend upstream's
build-id support in order to generate more useful information for the
user of a Fedora system (for example, when the user loads a corefile
into GDB, we detect whether the executable that generated that
corefile is present, and if it's not we issue a warning suggesting
that it should be installed, while also providing the build-id of the
executable). A while ago, Fedora GDB stopped printing those warnings.
I wanted to investigate this right away, and spent some time trying to
determine what was going on, but other things happened and I got
sidetracked. Meanwhile, the bug started to be noticed by some of our
users, and its priority started changing. Then, someone on IRC also
mentioned the problem, and when I tried helping him, I noticed he
wasn't running Fedora. Hm... So maybe the bug was *also* present
upstream.
After "some" time investigating, and with a lot of help from Keith and
others, I was finally able to determine that yes, the bug is also
present upstream, and that even though it started with a change in ld,
it is indeed a GDB issue.
So, as I said, the problem started with binutils, more specifically
after the following commit was pushed:
commit
f6aec96dce1ddbd8961a3aa8a2925db2021719bb
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Tue Feb 27 11:34:20 2018 -0800
ld: Add --enable-separate-code
This commit makes ld use "-z separate-code" by default on x86-64
machines. What this means is that code pages and data pages are now
separated in the binary, which is confusing GDB when it tries to decide
what to dump.
BTW, Fedora 28 binutils doesn't have this code, which means that
Fedora 28 GDB doesn't have the problem. From Fedora 29 on, binutils
was rebased and incorporated the commit above, which started causing
Fedora GDB to fail.
Anyway, the first thing I tried was to pass "-z max-page-size" and
specify a bigger page size (I saw a patch that did this and was
proposed to Linux, so I thought it might help). Obviously, this
didn't work, because the real "problem" is that ld will always use
separate pages for code and data. So I decided to look into how GDB
dumped the pages, and that's where I found the real issue.
What happens is that, because of "-z separate-code", the first two pages
of the ELF binary are (from /proc/PID/smaps):
00400000-
00401000 r--p
00000000 fc:01 799548 /file
Size: 4 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
Rss: 4 kB
Pss: 4 kB
Shared_Clean: 0 kB
Shared_Dirty: 0 kB
Private_Clean: 4 kB
Private_Dirty: 0 kB
Referenced: 4 kB
Anonymous: 0 kB
LazyFree: 0 kB
AnonHugePages: 0 kB
ShmemPmdMapped: 0 kB
Shared_Hugetlb: 0 kB
Private_Hugetlb: 0 kB
Swap: 0 kB
SwapPss: 0 kB
Locked: 0 kB
THPeligible: 0
VmFlags: rd mr mw me dw sd
00401000-
00402000 r-xp
00001000 fc:01 799548 /file
Size: 4 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
Rss: 4 kB
Pss: 4 kB
Shared_Clean: 0 kB
Shared_Dirty: 0 kB
Private_Clean: 0 kB
Private_Dirty: 4 kB
Referenced: 4 kB
Anonymous: 4 kB
LazyFree: 0 kB
AnonHugePages: 0 kB
ShmemPmdMapped: 0 kB
Shared_Hugetlb: 0 kB
Private_Hugetlb: 0 kB
Swap: 0 kB
SwapPss: 0 kB
Locked: 0 kB
THPeligible: 0
VmFlags: rd ex mr mw me dw sd
Whereas before, we had only one:
00400000-
00401000 r-xp
00000000 fc:01 798593 /file
Size: 4 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
Rss: 4 kB
Pss: 4 kB
Shared_Clean: 0 kB
Shared_Dirty: 0 kB
Private_Clean: 0 kB
Private_Dirty: 4 kB
Referenced: 4 kB
Anonymous: 4 kB
LazyFree: 0 kB
AnonHugePages: 0 kB
ShmemPmdMapped: 0 kB
Shared_Hugetlb: 0 kB
Private_Hugetlb: 0 kB
Swap: 0 kB
SwapPss: 0 kB
Locked: 0 kB
THPeligible: 0
VmFlags: rd ex mr mw me dw sd
Notice how we have "Anonymous" data mapped into the page. This will be
important.
So, the way GDB decides which pages it should dump has been revamped
by my patch in 2015, and now it takes the contents of
/proc/PID/coredump_filter into account. The default value for Linux
is 0x33, which means:
Dump anonymous private, anonymous shared, ELF headers and HugeTLB
private pages.
Or:
filter_flags filterflags = (COREFILTER_ANON_PRIVATE
| COREFILTER_ANON_SHARED
| COREFILTER_ELF_HEADERS
| COREFILTER_HUGETLB_PRIVATE);
Now, it is important to keep in mind that GDB doesn't always have *all*
of the necessary information to exactly determine the type of a page, so
the whole algorithm is based on heuristics (you can take a look at
linux-tdep.c:dump_mapping_p and
linux-tdep.c:linux_find_memory_regions_full for more info).
Before the patch to make ld use "-z separate-code", the (single) page
containing data and code was being flagged as an anonymous (due to the
non-zero "Anonymous:" field) private (due to the "r-xp" permission),
which means that it was being dumped into the corefile. That's why it
was working fine.
Now, as you can imagine, when "-z separate-code" is used, the *data*
page (which is where the ELF notes are, including the build-id one) now
doesn't have any "Anonymous:" mapping, so the heuristic is flagging it
as file-backed private, which is *not* dumped by default.
The next question I had to answer was: how come a corefile generated by
the Linux kernel was correct? Well, the answer is that GDB, unlike
Linux, doesn't actually implement the COREFILTER_ELF_HEADERS support.
On Linux, even though the data page is also treated as a file-backed
private mapping, it is also checked to see if there are any ELF headers
in the page, and then, because we *do* have ELF headers there, it is
dumped.
So, after more time trying to think of ways to fix this, I was able to
implement an algorithm that reads the first few bytes of the memory
mapping being processed, and checks to see if the ELF magic code is
present. This is basically what Linux does as well, except that, if
it finds the ELF magic code, it just dumps one page to the corefile,
whereas GDB will dump the whole mapping. But I don't think that's a
big issue, to be honest.
It's also important to explain that we *only* perform the ELF magic
code check if:
- The algorithm has decided *not* to dump the mapping so far, and;
- The mapping is private, and;
- The mapping's offset is zero, and;
- The user has requested us to dump mappings with ELF headers.
IOW, we're not going to blindly check every mapping.
As for the testcase, I struggled even more trying to write it. Since
our build-id support on upstream GDB is not very extensive, it's not
really possible to determine whether a corefile contains build-id
information or not just by using GDB. So, after thinking a lot about
the problem, I decided to rely on an external tool, eu-unstrip, in
order to verify whether the dump was successful. I verified the test
here on my machine, and everything seems to work as expected (i.e., it
fails without the patch, and works with the patch applied). We are
working hard to upstream our "local" Fedora GDB patches, and we intend
to submit our build-id extension patches "soon", so hopefully we'll be
able to use GDB itself to perform this verification.
I built and regtested this on the BuildBot, and no problems were
found.
gdb/ChangeLog:
2019-04-25 Sergio Durigan Junior <sergiodj@redhat.com>
PR corefiles/11608
PR corefiles/18187
* linux-tdep.c (dump_mapping_p): Add new parameters ADDR and
OFFSET. Verify if current mapping contains an ELF header.
(linux_find_memory_regions_full): Adjust call to
dump_mapping_p.
gdb/testsuite/ChangeLog:
2019-04-25 Sergio Durigan Junior <sergiodj@redhat.com>
PR corefiles/11608
PR corefiles/18187
* gdb.base/coredump-filter-build-id.exp: New file.
Alan Hayward [Fri, 12 Apr 2019 15:36:51 +0000 (16:36 +0100)]
testsuite: Add option to capture gdbserver debug
Add both board option and environment variable which enables gdbserver
debug and sends it to the file gdbserver.debug, located in the output
directory for the current test. Document this.
Add support for the environment variable in the Makefile.
The testsuite can be run with gdbserver debug enabled in the following way:
make check GDBSERVER_DEBUG=all
Disable tspeed.exp when debugging to prevent the log file filling
many gigabytes then timing out.
gdb/testsuite/ChangeLog:
* Makefile.in: Pass through GDBSERVER_DEBUG.
* README (Testsuite Parameters): Add GDBSERVER_DEBUG.
(gdbserver,debug): Add board setting.
* gdb.trace/tspeed.exp: Skip when debugging.
* lib/gdb.exp (gdbserver_debug_enabled): New procedure.
* lib/gdbserver-support.exp: Likewise
H.J. Lu [Thu, 25 Apr 2019 14:53:46 +0000 (07:53 -0700)]
LTO: Properly handle wrapper symbols in IR
When a wrapper symbol, __wrap_FOO, is defined in IR, its resolution
should be LDPR_PREVAILING_DEF, not PREVAILING_DEF_IRONLY, since LTO
doesn't know that __wrap_FOO provides definition of FOO. And resolution
of FOO should be LDPR_RESOLVED_IR since it is resolved by __wrap_FOO in
IR.
PR ld/24406
* ld.texi: Remove LTO warning from --wrap.
* plugin.c (get_symbols): Update resolution for wrapper and
wrapped symbols.
* testsuite/ld-plugin/lto.exp: Run ld/24406 tests.
* testsuite/ld-plugin/pr24406-1.c: New file.
* testsuite/ld-plugin/pr24406-2a.c: Likewise.
* testsuite/ld-plugin/pr24406-2b.c: Likewise.
Sandra Loosemore [Thu, 25 Apr 2019 14:27:02 +0000 (07:27 -0700)]
Detect invalid length field in debug frame FDE header.
GDB was failing to catch cases where a corrupt ELF or core file
contained an invalid length value in a Dwarf debug frame FDE header.
It was checking for buffer overflow but not cases where the length was
negative or caused pointer wrap-around.
In addition to the additional validity check, this patch cleans up the
multiple signed/unsigned conversions on the length field so that an
unsigned representation is used consistently throughout.
This patch fixes CVE-2017-9778 and PR gdb/21600.
2019-04-25 Sandra Loosemore <sandra@codesourcery.com>
Kang Li <kanglictf@gmail.com>
PR gdb/21600
* dwarf2-frame.c (read_initial_length): Be consistent about using
unsigned representation of length.
(decode_frame_entry_1): Likewise. Check for wraparound of
end pointer as well as buffer overflow.
Sudakshina Das [Thu, 25 Apr 2019 10:37:25 +0000 (11:37 +0100)]
[BFD, AArch64] Improve bti/pac plts.
This patch aims to improve the definitions of BTI and PAC based PLTs.
The following changes are made:
* PLT0 does not need PAC instructions since the PLTGOT[2] (and PLTGOT[1])
are readonly so they cannot be corrupted at runtime. Thus both PAC plt0
and BTI+PAC plt0 are removed and we can use basic plt0 and BTI plt0
instead, respectively.
* We can remove the extra padding nops when we add the new bti instructions.
BTI plt0 and BTI TLSDESC plt are updated.
* For better performance PLTn could be padded to 24bytes. Both BTI pltn and
PAC pltn are updated.
*** bfd/ChangeLog ***
2019-04-25 Sudakshina Das <sudi.das@arm.com>
* elfnn-aarch64.c (PLT_BTI_ENTRY_SIZE): Remove.
(PLT_BTI_TLSDESC_ENTRY_SIZE): Remove.
(PLT_PAC_ENTRY_SIZE, PLT_BTI_PAC_ENTRY_SIZE): Remove.
(PLT_BTI_SMALL_ENTRY_SIZE, PLT_PAC_SMALL_ENTRY_SIZE): Update.
(elfNN_aarch64_small_plt0_pac_entry): Remove.
(elfNN_aarch64_small_plt0_bti_pac_entry): Remove.
(elfNN_aarch64_small_plt0_bti_entry): Update.
(elfNN_aarch64_small_plt_bti_entry): Update.
(elfNN_aarch64_small_plt_pac_entry): Update.
(elfNN_aarch64_tlsdesc_small_plt_bti_entry): Update.
(setup_plt_values): Setup new entries.
(elfNN_aarch64_finish_dynamic_sections): Remove size change.
(elfNN_aarch64_plt_sym_val): Likewise.
*** ld/ChangeLog ***
2019-04-25 Sudakshina Das <sudi.das@arm.com>
* testsuite/ld-aarch64/bti-pac-plt-1.d: Update.
* testsuite/ld-aarch64/bti-pac-plt-2.d: Update.
* testsuite/ld-aarch64/bti-plt-1.d: Update.
* testsuite/ld-aarch64/bti-plt-3.d: Update.
* testsuite/ld-aarch64/bti-plt-5.d: Update.
* testsuite/ld-aarch64/pac-plt-1.d: Update.
* testsuite/ld-aarch64/pac-plt-2.d: Update.
Maciej W. Rozycki [Thu, 25 Apr 2019 00:28:49 +0000 (01:28 +0100)]
MIPS/include: opcode/mips.h: Update stale comment for CODE20 operand
Complement commit
1586d91e32ea ("/ 0 should send SIGFPE not SIGTRAP..."),
<https://sourceware.org/ml/binutils/2004-07/msg00260.html>, and update a
stale comment referring the 20-bit code field of the BREAK and SDBBP
instructions, by making it explicit that where permitted by choosing the
MIPS32 or a later ISA the whole field can now be set with a single
operand for the SDBBP instruction only.
include/
* opcode/mips.h: Update comment for MIPS32 CODE20 operand.
GDB Administrator [Thu, 25 Apr 2019 00:00:15 +0000 (00:00 +0000)]
Automatic date update in version.in
Alexandre Oliva [Sat, 13 Apr 2019 08:55:34 +0000 (05:55 -0300)]
Speed up locview resolution with relaxable frags
Targets such as xtensa incur a much higher overhead to resolve
location view numbers than e.g. x86, because the expressions used to
compute view numbers cannot be resolved soon enough.
Each view number is computed by incrementing the previous view, if
they are both at the same address, or by resetting it to zero
otherwise. If PV is the previous view number, PL is its location, and
NL is the location of the next view, its number is computed by
evaluating NV = !(NL > PL) * (PV + 1).
set_or_check_view uses resolve_expression to decide whether portions
of this expression can be simplified to constants. The (NL > PL)
subexpression is one that can often be resolved to a constant,
breaking chains of view number computations at instructions of nonzero
length, but not after alignment that might be unnecessary.
Alas, when nearly every frag ends with a relaxable instruction,
frag_offset_fixed_p will correctly fail to determine a known offset
between two unresolved addresses in neighboring frags, so the
unresolved symbolic operation will be constructed and used in the
computation of most view numbers. This results in very deep
expressions.
As view numbers get referenced in location view lists, each operand in
the list goes through symbol_clone_if_forward_ref, which recurses on
every subexpression. If each view number were to be referenced, this
would exhibit O(n^2) behavior, where n is the depth of the view number
expressions, i.e., the length of view number sequences without an
early resolution that cuts the expression short.
This patch enables address compares used by view numbering to be
resolved even when exact offsets are not known, using new logic to
determine when the location either remained the same or changed for
sure, even with the possibility of relaxation. This enables most view
number expressions to be resolved with a small, reasonable depth.
PR gas/24444
* frags.c (frag_gtoffset_p): New.
* frags.h (frag_gtoffset_p): Declare it.
* expr.c (resolve_expression): Use it.
Tom Tromey [Wed, 24 Apr 2019 19:43:27 +0000 (13:43 -0600)]
Fix Rust testing
This changes the gdb test suite to omit -fno-stack-protector when
compiling Rust code. This makes Rust testing work again.
I think I saw this patch somewhere already, but I couldn't find it
again just now, so I'm checking this version in.
gdb/testsuite/ChangeLog
2019-04-24 Tom Tromey <tromey@adacore.com>
* lib/gdb.exp (gdb_compile): Don't add -fno-stack-protector for
Rust.
Sandra Loosemore [Wed, 24 Apr 2019 19:14:56 +0000 (12:14 -0700)]
Use better test for usable compiler in ld testsuite.
The ld testsuite includes numerous tests that depend on being able to
compile and link programs with the C compiler. Some of these tests
use [which $CC] to check for the presence of the compiler before
proceeding with the test, but run_ld_link_exec_tests and run_cc_link_tests
give ERRORs if compilation fails. Also, even if $CC is defined and present,
it may not be usable due to missing libraries, etc.
This patch adds a new procedure check_compiler_available that attempts
to build an empty program and caches the result. Uses of [which $CC]
are replaced with calls to this procedure, and run_ld_link_exec_tests
and run_cc_link_tests now also guard attempts to use $CC.
2019-04-24 Sandra Loosemore <sandra@codesourcery.com>
ld/
* testsuite/config/default.exp: Use [check_compiler_available]
instead of [which $CC].
* testsuite/ld-auto-import/auto-import.exp: Likewise.
* testsuite/ld-cygwin/exe-export.exp: Likewise.
* testsuite/ld-elf/audit.exp: Likewise.
* testsuite/ld-elf/compress.exp: Likewise.
* testsuite/ld-elf/dwarf.exp: Likewise.
* testsuite/ld-elf/elf.exp: Likewise.
* testsuite/ld-elf/indirect.exp: Likewise.
* testsuite/ld-elf/linux-x86.exp: Likewise.
* testsuite/ld-elf/shared.exp: Likewise.
* testsuite/ld-elf/tls.exp: Likewise.
* testsuite/ld-elf/wrap.exp: Likewise.
* testsuite/ld-elfcomm/elfcomm.exp: Likewise.
* testsuite/ld-elfvers/vers.exp: Likewise.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
* testsuite/ld-elfweak/elfweak.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-i386/i386.exp: Likewise.
* testsuite/ld-i386/no-plt.exp: Likewise.
* testsuite/ld-i386/tls.exp: Likewise.
* testsuite/ld-ifunc/ifunc.exp: Likewise.
* testsuite/ld-mn10300/mn10300.exp: Likewise.
* testsuite/ld-pe/pe-compile.exp: Likewise.
* testsuite/ld-pe/pe-run.exp: Likewise.
* testsuite/ld-pe/pe-run2.exp: Likewise.
* testsuite/ld-pie/pie.exp: Likewise.
* testsuite/ld-plugin/lto.exp: Likewise.
* testsuite/ld-plugin/plugin.exp: Likewise.
* testsuite/ld-scripts/crossref.exp: Likewise.
* testsuite/ld-sh/sh.exp: Likewise.
* testsuite/ld-shared/shared.exp: Likewise.
* testsuite/ld-size/size.exp: Likewise.
* testsuite/ld-srec/srec.exp: Likewise.
* testsuite/ld-undefined/undefined.exp: Likewise.
* testsuite/ld-unique/unique.exp: Likewise.
* testsuite/ld-x86-64/mpx.exp: Likewise.
* testsuite/ld-x86-64/no-plt.exp: Likewise.
* testsuite/ld-x86-64/tls.exp: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/lib/ld-lib.exp (run_ld_link_exec_tests): Call
check_compiler_available before trying to use the compiler.
(run_cc_link_tests): Likewise.
(check_compiler_available): New. Use it instead of [which $CC].
Sergio Durigan Junior [Wed, 24 Apr 2019 18:53:59 +0000 (14:53 -0400)]
Use "pulongest" on aarch64-tdep.c:aarch64_gdbarch_init
While trying to build GDB on i686, I found the following error:
In file included from ../../gdb/common/common-defs.h:105,
from ../../gdb/defs.h:28,
from ../../gdb/aarch64-tdep.c:21:
../../gdb/aarch64-tdep.c: In function 'gdbarch* aarch64_gdbarch_init(gdbarch_info, gdbarch_list*)':
../../gdb/aarch64-tdep.c:3176:43: error: format '%ld' expects argument of type 'long int', but argument 4 has type 'uint64_t' {aka 'long long unsigned int'} [-Werror=format=]
3176 | internal_error (__FILE__, __LINE__, _("VQ out of bounds: %ld (max %d)"),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../gdb/common/gdb_locale.h:28:29: note: in definition of macro '_'
28 | # define _(String) gettext (String)
| ^~~~~~
../../gdb/aarch64-tdep.c:3176:64: note: format string is defined here
3176 | internal_error (__FILE__, __LINE__, _("VQ out of bounds: %ld (max %d)"),
| ~~^
| |
| long int
| %lld
This happens because aarch64-tdep.c:aarch64_gdbarch_init prints a
"uint64_t" variable using "%ld". This patch fixes the build by using
"pulongest" instead. As explained in a similar fix (commit
495143533ad95369811391c6e3c6dadd69d7dd67), this should be safe because
if aarch64-tdep.c is included in the build, then ULONGEST must be a
64-bit type.
gdb/ChangeLog:
2019-04-24 Sergio Durigan Junior <sergiodj@redhat.com>
* aarch64-tdep.c (aarch64_gdbarch_init): Use "pulongest" to print
"vq".
Tom Tromey [Tue, 16 Apr 2019 17:11:10 +0000 (11:11 -0600)]
Fix passing of struct with bitfields on x86-64
Commit
4aa866af ("Fix AMD64 return value ABI in expression
evaluation") introduced a regression when calling a function with a
structure that contains bitfields.
Because the caller of amd64_has_unaligned_fields handles bitfields
already, it seemed to me that the simplest fix was to ignore bitfields
here.
gdb/ChangeLog
2019-04-24 Tom Tromey <tromey@adacore.com>
* amd64-tdep.c (amd64_has_unaligned_fields): Ignore bitfields.
gdb/testsuite/ChangeLog
2019-04-24 Tom Tromey <tromey@adacore.com>
* gdb.arch/amd64-eval.exp: Test bitfield return.
* gdb.arch/amd64-eval.cc (struct Bitfields): New.
(class Foo) <return_bitfields>: New method.
(main): Call it.
Nick Clifton [Wed, 24 Apr 2019 16:44:31 +0000 (17:44 +0100)]
Stop strip from merging notes when stripping debug or dwo information.
* objcopy.c (strip_main): Do not enable note merging by default if
just stripping debug or dwo information.
* doc/binutils.texi (strip): Update documentation.
Alan Modra [Wed, 24 Apr 2019 01:56:51 +0000 (11:26 +0930)]
resolve_symbol_value vs. .loc view resolution
In most cases we don't want expression symbols, such as that created
for an expression like "symbol + (1f - .)", resolved down to a
constant. Instead we'd like to leave the expression as "symbol +
constant" once the "1f - ." part has been resolved, and let the
backend decide whether "symbol" can be reduced further.
However, that doesn't work when trying to resolve .loc view symbols
early. We get expression symbols left as an O_symbol expression
pointing at an absolute symbol, and marked as sy_flags.sy_resolved.
That wouldn't really be a problem, but when one of those expression
symbols is used in further .loc view expressions, its value is taken
as zero.
This patch fixes the symbol value mistake, and stops creation of
O_symbol expression symbols pointing to absolute symbols. Either of
these fixes would cure the .loc view usage.
PR 24444
* symbols.c (resolve_symbol_value): When handling symbols
marked as sy_flags.resolved, return correct value for the
case of expression symbols left as an O_symbol expression.
Merge O_symbol code handling undefined and common symbols with
code handling special cases of expression symbols. Use
seg_left to test for undefined and common symbols. Don't
leave an O_symbol expression when X_add_symbol resolves to
the absolute_section. Init final_val later.
* testsuite/gas/mmix/basep-7.d: Adjust expected output.
John Darrington [Wed, 24 Apr 2019 07:41:23 +0000 (09:41 +0200)]
S12Z: Opcodes: Handle bit map operations with non-canonical operands.
opcodes/
* s12z-opc.c (bm_decode): Handle the RESERVERD0 case.
gas/
* testsuite/gas/s12z/bit-manip-invalid.d: Extend the test.
* testsuite/gas/s12z/bit-manip-invalid.s: Extend the test.
John Darrington [Mon, 15 Apr 2019 07:25:23 +0000 (09:25 +0200)]
S12Z: s12z-opc.h: Add extern "C" bracketing
opcodes/
* s12z-opc.h: Add extern "C" bracketing to help
users who wish to use this interface in c++ code.
GDB Administrator [Wed, 24 Apr 2019 00:00:16 +0000 (00:00 +0000)]
Automatic date update in version.in
Andrew Burgess [Thu, 10 Jan 2019 20:38:42 +0000 (20:38 +0000)]
gdb/s12z: Use default gdbarch methods where possible
Make use of the default gdbarch methods for gdbarch_unwind_pc, and
gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* s12z-tdep.c (s12z_unwind_pc): Delete.
(s12z_unwind_sp): Delete.
(s12z_gdbarch_init): Don't register deleted functions with
gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 20:36:34 +0000 (20:36 +0000)]
gdb/rl78: Use default gdbarch methods where possible
Make use of the default gdbarch method gdbarch_unwind_sp where
possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* rl78-tdep.c (rl78_unwind_sp): Delete.
(rl78_gdbarch_init): Don't register deleted function with gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 20:32:40 +0000 (20:32 +0000)]
gdb/xstormy16: Use default gdbarch methods where possible
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* xstormy16-tdep.c (xstormy16_unwind_sp): Delete.
(xstormy16_unwind_pc): Delete.
(xstormy16_dummy_id): Delete.
(xstormy16_gdbarch_init): Don't register deleted functions with
gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 20:30:32 +0000 (20:30 +0000)]
gdb/vax: Use default gdbarch methods where possible
Make use of the default gdbarch method gdbarch_unwind_pc where
possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* vax-tdep.c (vax_unwind_pc): Delete.
(vax_gdbarch_init): Don't register deleted function with gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 20:28:24 +0000 (20:28 +0000)]
gdb/v850: Use default gdbarch methods where possible
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* v850-tdep.c (v850_unwind_sp): Delete.
(v850_unwind_pc): Delete.
(v850_dummy_id): Delete.
(v850_gdbarch_init): Don't register deleted functions with
gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 20:25:59 +0000 (20:25 +0000)]
gdb/tilegx: Use default gdbarch methods where possible
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* tilegx-tdep.c (tilegx_unwind_sp): Delete.
(tilegx_unwind_pc): Delete.
(tilegx_unwind_dummy_id): Delete.
(tilegx_gdbarch_init): Don't register deleted functions with
gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 20:23:44 +0000 (20:23 +0000)]
gdb/tic6x: Use default gdbarch methods where possible
Make use of the default gdbarch methods for gdbarch_dummy_id, and
gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* tic6x-tdep.c (tic6x_unwind_sp): Delete.
(tic6x_dummy_id): Delete.
(tic6x_gdbarch_init): Don't register deleted functions with
gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 20:20:25 +0000 (20:20 +0000)]
gdb/sparc: Use default_unwind_pc
Make use of the default gdbarch method gdbarch_unwind_pc where
possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* sparc-tdep.c (sparc_unwind_pc): Delete.
(sparc32_gdbarch_init): Don't register deleted function with
gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 20:17:00 +0000 (20:17 +0000)]
gdb/sh: Use default gdbarch methods where possible
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* sh-tdep.c (sh_unwind_sp): Delete.
(sh_unwind_pc): Delete.
(sh_dummy_id): Delete.
(sh_gdbarch_init): Don't register deleted functions with
gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 20:15:03 +0000 (20:15 +0000)]
gdb/score: Use default gdbarch methods where possible
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* score-tdep.c (score_unwind_sp): Delete.
(score_unwind_pc): Delete.
(score_dummy_id): Delete.
(score_gdbarch_init): Don't register deleted functions with
gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 20:12:28 +0000 (20:12 +0000)]
gdb/rx: Use default gdbarch methods where possible
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* rx-tdep.c (rx_unwind_pc): Delete.
(rx_unwind_sp): Delete.
(rx_dummy_id): Delete.
(rx_gdbarch_init): Don't register deleted functions with
gdbarch. Update comment.
Andrew Burgess [Thu, 10 Jan 2019 20:08:18 +0000 (20:08 +0000)]
gdb/rs6000: Use default gdbarch methods where possible
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* rs6000-tdep.c (rs6000_unwind_pc): Delete.
(rs6000_dummy_id): Delete.
(rs6000_gdbarch_init): Don't register deleted functions with
gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 18:58:18 +0000 (18:58 +0000)]
gdb/or1k: Use default gdbarch methods where possible
Make use of the default gdbarch method gdbarch_dummy_id where
possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
This commit leaves or1k_unwind_sp and or1k_unwind_pc in place. These
functions do match the default methods except that they add additional
debugging code. In order to preserve the debug I have left these
functions unchanged.
gdb/ChangeLog:
* or1k-tdep.c (or1k_dummy_id): Delete.
(or1k_gdbarch_init): Don't register deleted function with gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 18:55:23 +0000 (18:55 +0000)]
gdb/nios2: Use default gdbarch methods where possible
Make use of the default gdbarch methods for gdbarch_dummy_id, and
gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* nios2-tdep.c (nios2_dummy_id): Delete.
(nios2_unwind_sp): Delete.
(nios2_gdbarch_init): Don't register deleted functions with
gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 18:53:31 +0000 (18:53 +0000)]
gdb/nds32: Use default gdbarch methods where possible
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* nds32-tdep.c (nds32_dummy_id): Delete.
(nds32_unwind_pc): Delete.
(nds32_unwind_sp): Delete.
(nds32_gdbarch_init): Don't register deleted functions with
gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 18:51:11 +0000 (18:51 +0000)]
gdb/msp430: Use default gdbarch methods where possible
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* msp430-tdep.c (msp430_unwind_pc): Delete.
(msp430_unwind_sp): Delete.
(msp430_dummy_id): Delete.
(msp430_gdbarch_init): Don't register deleted functions with
gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 18:48:53 +0000 (18:48 +0000)]
gdb/moxie: Use default gdbarch methods where possible
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* moxie-tdep.c (moxie_unwind_sp): Delete.
(moxie_unwind_pc): Delete.
(moxie_dummy_id): Delete.
(moxie_gdbarch_init): Don't register deleted functions with
gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 18:46:27 +0000 (18:46 +0000)]
gdb/mn10300: Use default gdbarch methods where possible
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* mn10300-tdep.c (mn10300_dummy_id): Delete.
(mn10300_unwind_pc): Delete.
(mn10300_unwind_sp): Delete.
(mn10300_push_dummy_call): Use gdbarch_unwind_sp not
mn10300_unwind_sp.
(mn10300_frame_unwind_init): Don't register deleted functions with
gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 18:37:03 +0000 (18:37 +0000)]
gdb/mep: Use default gdbarch methods where possible
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* mep-tdep.c (mep_unwind_pc): Delete.
(mep_unwind_sp): Delete.
(mep_dummy_id): Delete.
(mep_gdbarch_init): Don't register deleted functions with
gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 18:33:50 +0000 (18:33 +0000)]
gdb/m68hc11: Use default gdbarch methods where possible
Make use of the default gdbarch methods for gdbarch_unwind_pc, and
gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* m68hc11-tdep.c (m68hc11_unwind_pc): Delete.
(m68hc11_unwind_sp): Delete.
(m68hc11_gdbarch_init): Don't register deleted functions with
gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 18:29:47 +0000 (18:29 +0000)]
gdb/m32r: Use default gdbarch methods where possible
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* m32r-tdep.c (m32r_unwind_sp): Delete.
(m32r_unwind_pc): Delete.
(m32r_dummy_id): Delete.
(m32r_gdbarch_init): Don't register deleted functions with
gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 18:27:12 +0000 (18:27 +0000)]
gdb/m32c: Use default gdbarch methods where possible
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* m32c-tdep.c (m32c_unwind_pc): Delete.
(m32c_unwind_sp): Delete.
(m32c_dummy_id): Delete.
(m32c_gdbarch_init): Don't register deleted functions with
gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 18:21:40 +0000 (18:21 +0000)]
gdb/lm32: Use default gdbarch methods where possible
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* gdb/lm32-tdep.c (lm32_unwind_sp): Delete.
(lm32_unwind_pc): Delete.
(lm32_dummy_id): Delete.
(lm32_gdbarch_init): Don't register deleted functions with
gdbarch.
Andrew Burgess [Thu, 10 Jan 2019 18:18:39 +0000 (18:18 +0000)]
gdb/iq2000: Use default gdbarch methods where possible
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* gdb/iq2000-tdep.c (iq2000_unwind_sp): Delete.
(iq2000_unwind_pc): Delete.
(iq2000_dummy_id): Delete.
(iq2000_gdbarch_init): Don't register deleted functions with
gdbarch.
Andrew Burgess [Fri, 12 Apr 2019 14:07:51 +0000 (15:07 +0100)]
gdb/nds32: Use type_align instead of nds32_type_align
The general type_align method should be a suitable alternative to
nds32_type_align, so switch to use that.
The only change this will introduce is related to static fields in a
struct or union, the existing code doesn't take account of static
fields when computing the alignment for structs of unions, though this
is probably a bug - which would probably be exposed by the test case
gdb.cp/many-args.exp, though I don't have any way to test this target
right now.
gdb/ChangeLog:
* nds32-tdep.c (nds32_type_align): Delete.
(nds32_push_dummy_call): Use type_align instead.
Andrew Burgess [Fri, 12 Apr 2019 13:25:32 +0000 (14:25 +0100)]
gdb/arm: Use type_align instead of arm_type_align
Replaces use of arm_type_align with common type_align function.
Doing this fixes a bug in arm_type_align where static fields are
considered as part of the alignment calculation of a struct, which
results in arguments passed on the stack being misaligned, this bug
was causing a failure in gdb.cp/many-args.exp.
Part of the old arm_type_align is retained and used as the gdbarch
type align callback in order to correctly align vectors.
gdb/ChangeLog:
* arm-tdep.c (arm_type_align): Only handle vector override case.
(arm_push_dummy_call): Use type_align.
(arm_gdbarch_init): Register arm_type_align gdbarch function.
Andrew Burgess [Sun, 7 Apr 2019 21:48:00 +0000 (22:48 +0100)]
gdb/aarch64: Use type_align instead of aarch64_type_align
Replaces use of aarch64_type_align with common type_align function.
Doing this fixes a bug in aarch64_type_align where static fields are
considered as part of the alignment calculation of a struct, which
results in arguments passed on the stack being misaligned. This bug
is exposed in the new test gdb.cp/many-args.exp.
Part of the old aarch64_type_align is retained and used as the gdbarch
type align callback in order to correctly align vectors.
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_type_align): Only handle vector override
case.
(pass_on_stack): Use type_align.
(aarch64_gdbarch_init): Register aarch64_type_align gdbarch
function.
gdb/testsuite/ChangeLog:
* gdb.cp/many-args.cc: New file.
* gdb.cp/many-args.exp: New file.
Tom Tromey [Tue, 23 Apr 2019 16:48:40 +0000 (10:48 -0600)]
Remove unused overload of line_header::file_name_at
I noticed that one of the overloads of line_header::file_name_at is
unused. This patch removes it.
gdb/ChangeLog
2019-04-23 Tom Tromey <tromey@adacore.com>
* dwarf2read.c (line_header::file_name_at): Remove unused
overload.
Tom de Vries [Tue, 23 Apr 2019 13:49:52 +0000 (15:49 +0200)]
[gdb/testsuite] Fix gdb.btrace/reconnect.exp with native-gdbserver
When running gdb.btrace/reconnect.exp with native-gdbserver, we run into:
...
FAIL: gdb.btrace/reconnect.exp: first: stepi 19
...
due to the fact that we're trying to match:
...
stepi 19^M
0x00007ffff7dd8b57 in _dl_start () from /lib64/ld-linux-x86-64.so.2^M
...
using pattern:
...
gdb_test "stepi 19" "0x.* in .* from target.*"
...
Fix this by changing the pattern to:
...
gdb_test "stepi 19" "0x.* in .* from .*"
...
Tested on x86_64-linux with native and native-gdbserver.
gdb/testsuite/ChangeLog:
2019-04-23 Tom de Vries <tdevries@suse.de>
PR gdb/24433
* gdb.btrace/reconnect.exp: Fix stepi 19 pattern.
Tom de Vries [Tue, 23 Apr 2019 13:35:21 +0000 (15:35 +0200)]
[gdb/contrib] Remove superfluous .alt file after dwz invocation in cc-with-tweaks.sh
The -m option of cc-with-tweaks.sh sets want_multi to true, invoking dwz like
this:
...
elif [ "$want_multi" = true ]; then
cp $output_file ${output_file}.alt
$DWZ -m ${output_file}.dwz "$output_file" ${output_file}.alt \
> /dev/null 2>&1
fi
...
The problem that is being solved here, is that we want to test dwz in
multifile mode, which requires more than one input file, while we only have
(at the scope of cc-with-tweaks.sh) one executable. We handle this by copying
the executable and offering this as a second input (and using a copy has the
additional benefit that it maximally enables dwz transformation).
However, after the dwz invocation, the copy is no longer used, and the
presence of the file actually causes a test regression:
...
FAIL: gdb.base/jit-so.exp: test jit-reader-load filename completion
...
Fix this by removing the superflous copy after dwz invocation.
Tested on x86_64-linux.
gdb/ChangeLog:
2019-04-23 Tom de Vries <tdevries@suse.de>
PR gdb/24438
* contrib/cc-with-tweaks.sh: Remove superfluous .alt file after dwz
invocation.
Alan Hayward [Tue, 23 Apr 2019 13:12:25 +0000 (14:12 +0100)]
Testsuite: Remove pie from trace tests
Ubuntu/Debian defaults PIE to enabled. This causes the trace tests
to fall over due to variables being returned as "unavailable". The
tests were never designed to work with pie.
Simply ensure the nopie flag is always used for the failing tests.
This removes 100+ failures when running native-gdbserver on Ubuntu 18.04.
gdb/testsuite/ChangeLog:
* gdb.trace/backtrace.exp: Use nopie flag.
* gdb.trace/circ.exp: Likewise.
* gdb.trace/collection.exp: Likewise.
* gdb.trace/ftrace.exp: Likewise.
* gdb.trace/mi-trace-unavailable.exp: Likewise.
* gdb.trace/mi-traceframe-changed.exp: Likewise.
* gdb.trace/qtro.exp: Likewise.
* gdb.trace/read-memory.exp: Likewise.
* gdb.trace/report.exp: Likewise.
* gdb.trace/tfile.exp: Likewise.
* gdb.trace/tfind.exp: Likewise.
* gdb.trace/unavailable.exp: Likewise.
Nick Clifton [Tue, 23 Apr 2019 10:19:58 +0000 (11:19 +0100)]
Update binutils release making documenation to mention changing the symbolic documentation link.
* README-how-to-make-a-release: Add note to update the symbolic
link from "docs" to "docs-2.x" on the sourceware website.
Alan Modra [Tue, 23 Apr 2019 07:12:27 +0000 (16:42 +0930)]
Fix automatic makefile dependencies for generated ld/e*.c
Commit
c40e31a121 broke --enable-dependency-tracking=no.
* Makefile.am (GENDEPDIR): New var, used..
(GENSCRIPTS): ..here.
* Makefile.in: Regenerate.
* genscripts.sh: Test for $DEPDIR set before every use.
Matthew Fortune [Fri, 19 Apr 2019 21:03:18 +0000 (21:03 +0000)]
Fix M5100 flags test with interAptiv-MR2
ld/
* testsuite/ld-mips-elf/mips-elf-flags.exp: Fix expected ASEs
for M5100.
Ali Tamur [Sat, 30 Mar 2019 02:29:24 +0000 (19:29 -0700)]
Support for DW_OP_addrx and DW_FORM_addrx tags
DW_OP_addrx is the new name of DW_OP_GNU_addr_index, and DW_FORM_addrx
is the name of DW_FORM_addr_index in the Dwarf 5 standard. This is a small
step towards supporting Dwarf 5 in gdb.
Note: I could not find any tests specifically for *_GNU_addr_index, and
I did not add any new tests, please advise.
GDB Administrator [Tue, 23 Apr 2019 00:00:17 +0000 (00:00 +0000)]
Automatic date update in version.in
Ali Tamur [Tue, 16 Apr 2019 22:35:31 +0000 (15:35 -0700)]
[FYI] Add myself to gdb/MAINTAINERS
Jim Wilson [Mon, 22 Apr 2019 21:17:55 +0000 (14:17 -0700)]
RISC-V: Enable 32-bit linux gdb core file support.
bfd/
* elfnn-riscv.c (PRSTATUS_SIZE) [ARCH_SIZE==32]: Change from 0 to 204.
Simon Marchi [Mon, 22 Apr 2019 18:02:36 +0000 (14:02 -0400)]
solib-svr4: Pass down svr4_info as much as possible
While reviewing
https://sourceware.org/ml/gdb-patches/2019-04/msg00141.html
I noticed that we relied heavily on global state through the
get_svr4_info function, which uses current_program_space. I thought we
could improve this (make things more explicit and easier to follow) by
- Making get_svr4_info accept a program_space parameter, making it
return the SVR4 info for that program space.
- Passing down the svr4_info object from callers as much as possible.
This means looking up the svr4_info for the appropriate program space at
the entry points of the solib-svr4.c file and passing it down. For now,
these entry points (most of them are "methods" of svr4_so_ops) rely on
current_program_space, but we can later try to change the target_so_ops
interface to pass down the program space.
gdb/ChangeLog:
* solib-svr4.c (get_svr4_info): Add pspace parameter.
(svr4_keep_data_in_core): Pass current_program_space to get_svr4_info.
(open_symbol_file_object): Likewise.
(svr4_default_sos): Add info parameter.
(svr4_read_so_list): Likewise.
(svr4_current_sos_direct): Adjust functions calls to pass down
info.
(svr4_current_sos_1): Add info parameter.
(svr4_current_sos): Call get_svr4_info, pass info down to
svr4_current_sos_1.
(svr4_fetch_objfile_link_map): Pass objfile->pspace to
get_svr4_info.
(svr4_in_dynsym_resolve_code): Pass current_program_space to
get_svr4_info.
(probes_table_htab_remove_objfile_probes): Pass objfile->pspace
to get_svr4_info.
(probes_table_remove_objfile_probes): Likewise.
(register_solib_event_probe): Add info parameter.
(solist_update_incremental): Pass info parameter down to
svr4_read_so_list.
(disable_probes_interface): Add info parameter.
(svr4_handle_solib_event): Pass current_program_space to
get_svr4_info. Adjust disable_probes_interface cleanup.
(svr4_create_probe_breakpoints): Add info parameter, pass it
down to register_solib_event_probe.
(svr4_create_solib_event_breakpoints): Add info parameter,
pass it down to svr4_create_probe_breakpoints.
(enable_break): Pass info down to
svr4_create_solib_event_breakpoints.
(svr4_solib_create_inferior_hook): Pass current_program_space to
get_svr4_info.
(svr4_clear_solib): Likewise.
Pedro Alves [Mon, 22 Apr 2019 13:20:59 +0000 (14:20 +0100)]
Fix "nosharedlibrary + continue + shared lib event" crash
On systems that use the probes-based solib interface, GDB misbehaves
if you run the "nosharelibrary" command, continue execution, and then
the program hits the shared library event breakpoint. On my system it
aborts like this:
(gdb) nosharedlibrary
(gdb) c
Continuing.
pure virtual method called
terminate called without an active exception
Aborted (core dumped)
Though it's really undefined behavior territory, caused by deferencing
a dangling solib event probe pointer.
I've observed this by running "nosharedlibrary" when stopped at the
entry point, but it should happen at any other point, if the program
does a dlopen/dlclose after.
The fix is to discard an objfile's probes from the svr4 probes table
when an objfile is about to be released.
New test included, works with both native and gdbserver testing.
Valgrind log:
(gdb) starti
(gdb) nosharedlibrary
(gdb) c
Continuing.
==24895== Invalid read of size 8
==24895== at 0x89E5FB: solib_event_probe_action(probe_and_action*) (solib-svr4.c:1735)
==24895== by 0x89E95A: svr4_handle_solib_event() (solib-svr4.c:1872)
==24895== by 0x8A7198: handle_solib_event() (solib.c:1274)
==24895== by 0x4E3407: bpstat_stop_status(address_space const*, unsigned long, thread_info*, target_waitstatus const*, bpstats*) (breakpoint.c:5407)
==24895== by 0x721F41: handle_signal_stop(execution_control_state*) (infrun.c:5685)
==24895== by 0x720B11: handle_inferior_event(execution_control_state*) (infrun.c:5129)
==24895== by 0x71DD93: fetch_inferior_event(void*) (infrun.c:3748)
==24895== by 0x7059C3: inferior_event_handler(inferior_event_type, void*) (inf-loop.c:43)
==24895== by 0x874DF0: remote_async_serial_handler(serial*, void*) (remote.c:14039)
==24895== by 0x894101: run_async_handler_and_reschedule(serial*) (ser-base.c:137)
==24895== by 0x8941E6: fd_event(int, void*) (ser-base.c:188)
==24895== by 0x67AFEF: handle_file_event(file_handler*, int) (event-loop.c:732)
==24895== Address 0x18b63860 is 0 bytes inside a block of size 136 free'd
==24895== at 0x4C2E616: operator delete(void*, unsigned long) (vg_replace_malloc.c:585)
==24895== by 0x8C6A12: stap_probe::~stap_probe() (stap-probe.c:124)
==24895== by 0x66F7DB: probe_key_free(bfd*, void*) (elfread.c:1382)
==24895== by 0x69B705: bfdregistry_callback_adaptor(void (*)(registry_container*, void*), registry_container*, void*) (gdb_bfd.c:131)
==24895== by 0x855A57: registry_clear_data(registry_data_registry*, void (*)(void (*)(registry_container*, void*), registry_container*, void*), registry_container*, registry_fields*) (registry.c:79)
==24895== by 0x855B01: registry_container_free_data(registry_data_registry*, void (*)(void (*)(registry_container*, void*), registry_container*, void*), registry_container*, registry_fields*) (registry.c:92)
==24895== by 0x69B783: bfd_free_data(bfd*) (gdb_bfd.c:131)
==24895== by 0x69C4BA: gdb_bfd_unref(bfd*) (gdb_bfd.c:609)
==24895== by 0x7CC33F: objfile::~objfile() (objfiles.c:651)
==24895== by 0x7CD559: objfile_purge_solibs() (objfiles.c:1021)
==24895== by 0x8A7132: no_shared_libraries(char const*, int) (solib.c:1252)
==24895== by 0x548E3D: do_const_cfunc(cmd_list_element*, char const*, int) (cli-decode.c:106)
==24895== Block was alloc'd at
==24895== at 0x4C2D42A: operator new(unsigned long) (vg_replace_malloc.c:334)
==24895== by 0x8C527C: handle_stap_probe(objfile*, sdt_note*, std::vector<probe*, std::allocator<probe*> >*, unsigned long) (stap-probe.c:1561)
==24895== by 0x8C5535: stap_static_probe_ops::get_probes(std::vector<probe*, std::allocator<probe*> >*, objfile*) const (stap-probe.c:1656)
==24895== by 0x66F71B: elf_get_probes(objfile*) (elfread.c:1365)
==24895== by 0x7EDD85: find_probes_in_objfile(objfile*, char const*, char const*) (probe.c:227)
==24895== by 0x4DF382: create_longjmp_master_breakpoint() (breakpoint.c:3275)
==24895== by 0x4F6562: breakpoint_re_set() (breakpoint.c:13828)
==24895== by 0x8A66AA: solib_add(char const*, int, int) (solib.c:1010)
==24895== by 0x89F7C6: enable_break(svr4_info*, int) (solib-svr4.c:2360)
==24895== by 0x8A104C: svr4_solib_create_inferior_hook(int) (solib-svr4.c:2992)
==24895== by 0x8A70B9: solib_create_inferior_hook(int) (solib.c:1215)
==24895== by 0x70C073: post_create_inferior(target_ops*, int) (infcmd.c:467)
==24895==
pure virtual method called
terminate called without an active exception
==24895==
==24895== Process terminating with default action of signal 6 (SIGABRT): dumping core
==24895== at 0x7CF3750: raise (raise.c:51)
==24895== by 0x7CF4D30: abort (abort.c:79)
==24895== by 0xB008F4: __gnu_cxx::__verbose_terminate_handler() (in build/gdb/gdb)
==24895== by 0xAFF845: __cxxabiv1::__terminate(void (*)()) (in build/gdb/gdb)
==24895== by 0xAFF890: std::terminate() (in build/gdb/gdb)
==24895== by 0xAFF95E: __cxa_pure_virtual (in build/gdb/gdb)
==24895== by 0x89E610: solib_event_probe_action(probe_and_action*) (solib-svr4.c:1735)
==24895== by 0x89E95A: svr4_handle_solib_event() (solib-svr4.c:1872)
==24895== by 0x8A7198: handle_solib_event() (solib.c:1274)
==24895== by 0x4E3407: bpstat_stop_status(address_space const*, unsigned long, thread_info*, target_waitstatus const*, bpstats*) (breakpoint.c:5407)
==24895== by 0x721F41: handle_signal_stop(execution_control_state*) (infrun.c:5685)
==24895== by 0x720B11: handle_inferior_event(execution_control_state*) (infrun.c:5129)
==24895==
Note, this little bit in the patch is just a cleanup that I noticed:
- lookup.prob = prob;
lookup.address = address;
That line isn't necessary because hashing/comparison only looks at the
address.
gdb/ChangeLog:
2019-04-22 Pedro Alves <palves@redhat.com>
* solib-svr4.c (svr4_free_objfile_observer): New.
(probe_and_action::objfile): New field.
(probes_table_htab_remove_objfile_probes)
(probes_table_remove_objfile_probes): New functions.
(register_solib_event_probe): Add 'objfile' parameter. Store it
in the new probe_and_action. Don't store the probe in 'lookup'.
(svr4_create_probe_breakpoints): Pass objfile to
register_solib_event_probe.
(_initialize_svr4_solib): Register a free_objfile observer.
gdb/testsuite/ChangeLog:
2019-04-22 Pedro Alves <palves@redhat.com>
* gdb.base/solib-probes-nosharedlibrary.c,
gdb.base/solib-probes-nosharedlibrary.exp: New files.
Pedro Alves [Mon, 22 Apr 2019 11:42:21 +0000 (12:42 +0100)]
Improve reverse debugging docs, mention built-in support and supports archs
gdb/doc/ChangeLog:
2019-04-22 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Reverse Execution): Mention and xref process record
and replay. Mention remote and system emulators.
(Process Record and Replay): List supported architectures.
Mention that "record btrace" is only supported on Intel
processors.
GDB Administrator [Mon, 22 Apr 2019 00:00:46 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sun, 21 Apr 2019 00:01:05 +0000 (00:01 +0000)]
Automatic date update in version.in
Philippe Waroquiers [Sat, 13 Apr 2019 08:22:41 +0000 (10:22 +0200)]
Fix GDB crash when registers cannot be modified.
This crash was detected when using GDB with the valgrind gdbserver.
To reproduce:
valgrind sleep 10000
In another window:
gdb
target remote | vgdb
p printf("make sleep print something\n")
=>
terminate called after throwing an instance of 'gdb_exception_error'
Aborted
The problem is that the valgrind gdbserver does not allow to change
registers when the inferior is blocked in a system call.
GDB then raises an exception. The exception causes the destructor
of
typedef std::unique_ptr<infcall_suspend_state, infcall_suspend_state_deleter>
infcall_suspend_state_up;
to be called. This destructor itself tries to restore the value of
the registers, and fails similarly. We must catch the exception in
the destructor to avoid crashing GDB.
If the destructor encounters a problem, no warning is produced if
there is an uncaught exception, as in this case, the user will already
be informed of a problem via this exception.
With this change, no crash anymore, and all the valgrind 3.15 tests
pass succesfully.
gdb/ChangeLog
2019-04-19 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* inferior.h (struct infcall_suspend_state_deleter):
Catch exception in destructor to avoid crash.
GDB Administrator [Sat, 20 Apr 2019 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom Tromey [Sun, 7 Apr 2019 22:32:54 +0000 (16:32 -0600)]
Remove common/queue.h
gdb no longer needs common/queue.h, so this removes it.
gdb/ChangeLog
2019-04-19 Tom Tromey <tom@tromey.com>
* common/queue.h: Remove.
Tom Tromey [Sun, 7 Apr 2019 22:32:19 +0000 (16:32 -0600)]
Remove an include of common/queue.h
event-loop.c does not need to include common/queue.h, so this removes
it.
gdb/ChangeLog
2019-04-19 Tom Tromey <tom@tromey.com>
* event-loop.c: Don't include "common/queue.h".
Tom Tromey [Sun, 7 Apr 2019 22:31:01 +0000 (16:31 -0600)]
Use std::list for remote_notif_state::notif_queue
This changes remote_notif_state::notif_queue to be a std::list and
updates all the uses.
gdb/ChangeLog
2019-04-19 Tom Tromey <tom@tromey.com>
* remote.c (remote_target): Use delete.
* remote-notif.h: Include <list>, not "common/queue.h".
(notif_client_p): Remove typedef.
(remote_notif_state): Add constructor, destructor, initializer.
<notif_queue>: Now a std::list.
(remote_notif_state_xfree): Don't declare.
* remote-notif.c (remote_notif_process, handle_notification)
(remote_notif_state_allocate): Update.
(~remote_notif_state): Rename from remote_notif_state_xfree.
Tom Tromey [Sun, 7 Apr 2019 22:17:40 +0000 (16:17 -0600)]
Use std::list for event notifications in gdbserver
This changes gdbserver to use std::list rather than common/queue.h for
event notifications.
gdb/gdbserver/ChangeLog
2019-04-19 Tom Tromey <tom@tromey.com>
* server.c (struct vstop_notif): Derive from notif_event.
<base>: Remove.
(queue_stop_reply): Update.
(remove_all_on_match_ptid): Change type. Rewrite.
(discard_queued_stop_replies): Rewrite.
(in_queued_stop_replies_ptid): Change type.
(in_queued_stop_replies): Rewrite.
(notif_stop): Update.
(queue_stop_reply_callback): Update.
(captured_main): Don't call initialize_notif.
(push_stop_notification): Update.
* notif.c (notif_write_event, handle_notif_ack)
(notif_event_enque, notif_push): Update.
(notif_event_xfree, initialize_notif): Remove.
* notif.h (struct notif_event): Include <list>, not
"common/queue.h".
(struct notif_server) <queue>: Now a std::list.
(notif_event_p): Remove typedef.
(initialize_notif): Don't declare.
(struct notif_event): Add virtual destructor.
Tom Tromey [Sun, 7 Apr 2019 21:39:37 +0000 (15:39 -0600)]
Make objfile::static_links an htab_up
This changes objfile::static_links to be an htab_up, so that ~objfile
no longer has to explicitly destroy it.
Tested by the buildbot.
gdb/ChangeLog
2019-04-19 Tom Tromey <tom@tromey.com>
* symfile.c (reread_symbols): Update.
* objfiles.c (objfile_register_static_link)
(objfile_lookup_static_link): Update
(~objfile) Don't delete static_links.
* objfiles.h (struct objfile) <static_links>: Now an htab_up.
Tom Tromey [Sun, 7 Apr 2019 21:29:58 +0000 (15:29 -0600)]
Make copy_name return std::string
This changes copy_name to return a std::string, updating all the
callers. In some cases, an extra copy was removed. This also
required a little bit of constification.
Tested by the buildbot.
gdb/ChangeLog
2019-04-19 Tom Tromey <tom@tromey.com>
* type-stack.h (struct type_stack) <insert>: Constify string.
* type-stack.c (type_stack::insert): Constify string.
* gdbtypes.h (lookup_template_type): Update.
(address_space_name_to_int): Update.
* gdbtypes.c (address_space_name_to_int): Make space_identifier
const.
(lookup_template_type): Make name const.
* c-exp.y: Update rules.
(lex_one_token, classify_name, classify_inner_name)
(c_print_token): Update.
* p-exp.y: Update rules.
(yylex): Update.
* f-exp.y: Update rules.
(yylex): Update.
* d-exp.y: Update rules.
(lex_one_token, classify_name, classify_inner_name): Update.
* parse.c (write_dollar_variable, copy_name): Return std::string.
* parser-defs.h (copy_name): Change return type.
* m2-exp.y: Update rules.
(yylex): Update.
* go-exp.y (lex_one_token): Update.
Update rules.
(classify_unsafe_function, classify_packaged_name)
(classify_name, yylex): Update.
Sergei Trofimovich [Sun, 17 Mar 2019 22:48:02 +0000 (22:48 +0000)]
gdb/configure.ac: add --enable-source-highlight
Allow disabling source-highlight dependency autodetection even
it exists in the system. More details on problem of automatic
dependencies:
https://wiki.gentoo.org/wiki/Project:Quality_Assurance/Automagic_dependencies
Noticed by Jeroen Roovers in https://bugs.gentoo.org/680238
* configure.ac: add --enable-source-highlight switch.
* configure: Regenerate.
* top.c (print_gdb_version): plumb --enable-source-highlight
status to "show configuration".
gdb/ChangeLog
2019-04-19 Sergei Trofimovich <siarheit@google.com>
* configure.ac: add --enable-source-highlight switch.
* configure: Regenerate.
* top.c (print_gdb_version): plumb --enable-source-highlight
status to "show configuration".
Tom Tromey [Tue, 9 Apr 2019 13:46:39 +0000 (07:46 -0600)]
Print non-Ada unions without crashing
ada-lang.c is a bit too eager trying to decode unions in the Ada style
-- looking for discriminants and such. This causes crashes when
printing a non-Ada union in Ada mode, something that can easily happen
when printing a value from history or certain registers on AArch64.
This patch fixes the bug by changing ada-lang.c to only apply special
Ada treatment to types coming from an Ada CU. This in turn required a
couple of surprising changes.
First, some of the Ada code was already using HAVE_GNAT_AUX_INFO to
decide whether a type had already been fixed -- such types had
INIT_CPLUS_SPECIFIC called on them. This patch changes these spots to
use the "none" identifier instead.
This then required changing value_rtti_type to avoid changing the
language-specific object attached to an Ada type, which seems like a
good change regardless.
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-04-19 Tom Tromey <tromey@adacore.com>
* ada-lang.c (ada_is_variant_part, ada_to_fixed_type_1):
Check ADA_TYPE_P.
(empty_record, ada_template_to_fixed_record_type_1)
(template_to_static_fixed_type)
(to_record_with_fixed_variant_part): Use INIT_NONE_SPECIFIC.
* cp-abi.c (value_rtti_type): Check HAVE_CPLUS_STRUCT.
* gdbtypes.h (INIT_NONE_SPECIFIC, ADA_TYPE_P): New
macros.
gdb/testsuite/ChangeLog
2019-04-19 Tom Tromey <tromey@adacore.com>
* gdb.ada/ptype_union.c: New file.
* gdb.ada/ptype_union.exp: New file.
projects / binutils-gdb.git / log