connman: bump to version 1.32

Drop upstream patches and add a new build fix (submitted upstream).

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ccache: bump to version 3.2.5

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/jack2: Fix build on nios2

Fixes
http://autobuild.buildroot.net/results/8f3/8f3d2139de7f85f729e0555f8513fdbd177cbadd/
http://autobuild.buildroot.net/results/5d2/5d2f049ab9fa6a1a4e3fa9884983ab66b2fccb56/
http://autobuild.buildroot.net/results/85a/85a4a7ee4cf5c0b65e4543a524909d9c0422eea4/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nvme: add optional udev support

Commands like 'nvme list' require libudev but support for libudev is
decided at compile time, and in buildroot this is hard disabled.
Add a check for udev and if it is available build nvme with udev
support.

Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
[Thomas:
 - add comment to explain the LIBUDEV variable value
 - use += instead of = to assign <pkg>_MAKE_OPTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

raspberrypi, raspberrypi2: document the two consoles (UART+HDMI)

The defconfigs for the Raspberry Pi boards start a console on HDMI in
addition to the classic one on UART. Document this feature in the
readme.

Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: add inter-module dependencies

As stated by Samuel the opencv2 package lacks inter-module dependencies:
http://lists.busybox.net/pipermail/buildroot/2016-April/158902.html

This patch adds the necessary code for freeswitch's mod_cv to compile.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

syslinux: Allow to build multiple flavors simultaneously

This becomes handy when building hybrid images that needs to be able
to boot in MBR and GPT mode.

Signed-off-by: Benoît Allard <benoit.allard@greenbone.net>
Tested-by: Matt Weber <matt@thewebers.ws>
Reviewed-by: Matt Weber <matt@thewebers.ws>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

arch/x86: remove support for i386

The Linux kernel doesn't even support i386 anymore, there is no NPTL
support for i386 and uClibc-ng only supports NPTL on x86, so there is
essentially no usable thread implementation. Most likely glibc and
musl also don't support i386 either. So it's time to remove the
support for this architecture variant.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

netsnmp: ensure lm-sensors is available if enabled

The ucd-snmp/lmsensorsMib module uses lm-sensors, so ensure netsnmp is built
after lm-sensors if enabled.

As the list of mib modules to built is configured using a string option in
Kconfig, we cannot easily select lm-sensors from the netsnmp package - But
we can at least ensure it gets built before hand if enabled.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board/minnowboard-max: Add a X-based graphical defconfig

This commit adds a new defconfig to build a X-based
graphical system for the Minnowboard MAX board.

  * The 'openbox' windows manager is chosen because it's simple
    and lightweigth.

  * Basic X apps are enabled (such as xrandr, xterm), so we
    can at least get a console and change video mode.

  * ALSA default configuration is provided, so HDMI audio
    works out-of-the-box.

  * OpenGL is supported.

Tested on Minnoboard Turot (which is Minnowboard Max compatible).

[Peter: drop unneeded/specific toolchain config options]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board/minnowboard-max: Add more peripherals and features to the kernel

This commit enables support for:
  * HDMI audio
  * Support for user-provided EDID firmware
    (useful to workaround broken monitors)
  * Evdev interface
  * System V IPC (required by ALSA)

The options make the system more useful.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board/minnowboard: Unify Minnowboard and Minnowboard MAX boards

Given Minnowboard and Minnowboard MAX boards are very similar,
it's desirable to unify the support for them.

This commit does the following:

  1) Remove Minnowboard MAX's genimage.cfg, post-build.sh
     and post-image.sh. These are identical to Minnowboard's.

  2) Move Minnowboard MAX's linux config, and rename it.

     It would be lovely to have a single kernel config file.
     The kernel size penalty involved in adding support for
     all the peripherals on both boards is small enough to
     justify this.

     However, the original Minnowboard has some GPIO buttons
     that need to be registered by the kernel. This is not
     upstreamed, and hence we need to use the yocto v3.8 kernel
     to have this support.

  3) Rename each grub config to grub-{board}.cfg.

  4) Modify (the now unique) post-build script to use
     a different grub config, according to the board.

  5) Update both defconfigs, as per the above changes.

  6) Finally, update the readme.txt.

[Peter: mention MAX in readme title]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board/minnowboard: Rework to generate SD card image

Let's rework the board and config files to use genimage
to generate the SD card image directly.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

core/pkg-kconfig: Do not use $(call ...) without parameters

When there are no parameters, simply use $(var) instead of $(call var)

Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

core/pkg-kconfig: Factorize make commands

Use a variable to factorize the calls to make, as we use the same set
of options multiple times.

Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gcc: fix ccache hash of patches in BR2_GLOBAL_PATCH_DIR

In commit f4682cf933, a hash of the patches applied to gcc was created
to make sure that ccache can properly detect when the toolchain has
changed. The patches applied to gcc consist of the buildroot patches in
package/gcc, but also potentially patches in BR2_GLOBAL_PATCH_DIR.
However, the path to the patches in BR2_GLOBAL_PATCH_DIR was corrected
incorrectly, because it misses a /. So instead of:

$(BR2_GLOBAL_PATCH_DIR)/gcc-initial/*.patch

it would look for

$(BR2_GLOBAL_PATCH_DIR)gcc-initial/*.patch

In other words, if BR2_GLOBAL_PATCH_DIR doesn't end with /, the patches
in BR2_GLOBAL_PATCH_DIR are not taken into account in the ccache hash.

To fix, add the missing /

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: He Chunhui <hchunhui@mail.ustc.edu.cn>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5webkit: restore package

Although this package has been removed from the official release
packages since Qt5.6.0, it is still available for users to build
it from source. This is useful for platforms without GPU since its
successor (QtWebEngine) requires OpenGL support.

The package now matches the community-based meta-qt5 Yocto layer,
using the exact same revision of the qtwebkit source from github:
https://github.com/meta-qt5/meta-qt5/commit/e434995a

Here is the project source tree:
https://github.com/qtproject/qtwebkit

All the patches have been pulled from Yocto as well.

Since we are now using the source from the git repository, we need
to create an empty .git/ folder to force the headers re-generation.
https://github.com/meta-qt5/meta-qt5/blob/jethro/recipes-qt/qt5/qt5.inc#L33

Note that GPLv3 license option has been added with this release.

Reviewed-by: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas: fix license to be LGPLv2.1+, not LGPLv2+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5serialbus: new package

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Julien Corjon <corjon.j@ecagroup.com>
[Thomas: better handling for !shared case.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5quickcontrols2: new package

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5canvas3d: new package

Signed-off-by: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ipmitool: add patch to fix missing stddef include

Needed for wchar_t. Fixes build error:

imbapi.h:140:9: error: unknown type name 'wchar_t'
 typedef wchar_t      WCHAR;

Fixes:
http://autobuild.buildroot.net/results/9e9/9e99aa8aebf68667b8c054b64e49de6dd73dd53d/
http://autobuild.buildroot.net/results/496/49637fcab9cd8e6278257158574fd7574f97bc30/
http://autobuild.buildroot.net/results/6a3/6a37f69ac40d60a1735afe5974cabec3ca5de41f/

Upstream status: Pending
https://sourceforge.net/p/ipmitool/mailman/message/35022779/

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5location: new package

Signed-off-by: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tvheadend: revert minimum required ffmpeg version numbers

Fixes
http://autobuild.buildroot.net/results/e62/e62dd4dbdb4c92bc657936566e73388e76343903/
and many others

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ltp-testsuite: build kernel modules when appropriate

If we're building a kernel, we can also build LTP's test modules.

Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: add qemu_xtensa_lx60_nommu_defconfig

Add noMMU configuration running on dc233c MMUv3 core with identity
memory map.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/qemu_xtensa_lx60_defconfig: switch to dc233c

dc232b is MMUv2 core, dc233c is very similar MMUv3 core. MMUv3 is the
latest full MMU for xtensa, which allows running both MMU and noMMU
linux variants.
Update configuration overlay and linux config file.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

elf2flt: enable for xtensa

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mesa3d/mesa3d-headers: bump version to 11.2.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: bump to version 2.28

Drop upstream patches (0004-0008).
Convert 0001-sscanf-no-ms-as.patch to git format.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rp-pppoe: select pppd

There's no benefit on it being an autodep since it makes it harder to
find, and pppd can be selected directly.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rp-pppoe: bump to version 3.12

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: update to uClibc-ng 1.0.14

Remove patch, which was applied upstream.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

raspberrypi, raspberrypi2: add a serial console

The current Buildroot defconfigs for Raspberry Pi and Raspberry Pi 2
instantiate a console on tty1, which appears on HDMI. Add a console on
the serial port (ttyAMA0) to be more consistent with other defconfigs
and provide a better out-of-the-box experience to users used to have a
serial console from Buildroot defconfigs.

This requires three changes:
 1. have two 'console=' entries in the kernel command line: tty1,
    then ttyAMA0;
 2. change BR2_TARGET_GENERIC_GETTY_PORT to "console", so it starts
    a getty on the last console= passed to the kernel, ttyAMA0;
 3. add a new getty on tty1 to the generated inittab.

Step 2 is actually obtained by removing BR2_TARGET_GENERIC_GETTY_PORT
entirely from the defconfigs, since "console" is the default value.

Step 3 requires a post-build script since the Buildroot makefiles can
configure only one console.

Note: instead of simply adding a new getty on ttyAMA0 (which would
work) this patch actually changes BR2_TARGET_GENERIC_GETTY_PORT to
instantiate a console on UART, then adds back tty1 via
post-build.sh. This is done only to avoid the "GENERIC_SERIAL" comment
where we instantiate an HDMI console, then instantiate a really-serial
console on another line.

The result is these two inittab lines:

  console::respawn:/sbin/getty -L  console 0 vt100 # GENERIC_SERIAL
  tty1::respawn:/sbin/getty -L  tty1 0 vt100 # HDMI console

Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cannelloni: make SCTP support optional

Since version 20160414 SCTP support is optional. Introduce an automatic
optional dependency for this protocol.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/scripts: fix graph-depends when run with python3

Make graph-depends script opening the output file in text mode since
only ascii characters will be written.

This change fixes the following error occuring when the default host
python interpreter is python3:

  make: Entering directory '/opt/buildroot'
  Getting targets
  Getting dependencies for ['toolchain-external', 'toolchain', 'busybox', ...]
  Getting dependencies for ['host-python3', 'host-pkgconf', 'host-gettext', ...]
  Getting dependencies for ['host-libxml2', 'host-swig', 'host-m4', ...]
  Getting version for ['toolchain-external', 'toolchain', 'busybox', ...]
  Traceback (most recent call last):
    File "/opt/buildroot/support/scripts/graph-depends", line 425, in <module>
      outfile.write("digraph G {\n")
  TypeError: a bytes-like object is required, not 'str'
  Makefile:807: recipe for target 'graph-depends' failed
  make[1]: *** [graph-depends] Error 1
  Makefile:84: recipe for target '_all' failed
  make: *** [_all] Error 2
  make: Leaving directory '/opt/buildroot'

While with python2, adding 'b' to the openning mode has no effect on
Linux (c.f. [2]), the above error is expected with python3 (c.f. [1]).

Therefore, just open the outfile in default (i.e. text) mode.

[1] https://docs.python.org/3/library/functions.html#open
[2] https://docs.python.org/2/library/functions.html#open

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/turbolua: new package

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/rtptools: fix build for toolchains missinf SUN RPC headers

Use a configure check rather than checking explicitly for uClibc.

Make the patch a git patch at the same time.

Fixes:
    http://autobuild.buildroot.org/results/1cf/1cfe3e019a627e7c092dbd94e4b891179e35bedd/
    http://autobuild.buildroot.org/results/5ba/5bad40610316392c3f213c3e2a27ac76abd88de6/
    http://autobuild.buildroot.org/results/789/789ebdc6a96fc62ca5c98bdd6b90de20872ea221/
    ... and numerous similar build failures

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imx-uuc: new package

This package provides the Universal Adapter user-space utility that is
used to receive commands from the Manufacturing Tool using the Freescale
UTP Protocol.

It requires a Freescale/NXP kernels whose configuration contains the
CONFIG_FSL_UTP option.

The /fat file is provided as a bootargs to the g_mass_storage driver
from U-Boot, see:
http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/tree/include/
configs/mx6sabre_common.h?h=imx_v2015.04_3.14.52_1.1.0_ga#n116

Init scripts are provided so that the tool starts automatically at
bootup.

Tested on Nitrogen6_MAX + MFGTools.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas:
 - test return value from start-stop⁻daemon in init script, and
   reindent the init script
 - fix dependency of the comment
 - rewrap Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: add optional dependency to openldap

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_shout

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_cv

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_imagick

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_memcache

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: add optional dependency to xz

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_soundtouch

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_alsa

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_sndfile

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_silk

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_portaudio

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_opus

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_isac

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_ilbc

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: add optional dependency to libg7221

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_codec2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_bv

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_lua

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_yaml

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: add optional dependency to freetype

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: add optional dependency to unixodbc

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: add optional dependency to libpng

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_enum

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: add optional dependency to libedit

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable optional modules

All these modules have no external dependencies.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: new package

This commit adds freeswitch without any configured modules and with a
minimal set of non-optional dependencies. All other dependencies and
modules will be added by further patches in this series.

Please note that freeswitch source repo bundles some libraries which
are also available as buildroot packages. The freeswitch build system
does not allow to use system libraries in these cases:

  apr, apr-util, libsrtp, libvpx, libyuv, sofia-sip, tiff

The reason are patches to these packages by the freeswitch project
which are not yet upstream. There is an open JIRA report for this
situation:
https://freeswitch.org/jira/si/jira.issueviews:issue-html/FS-353/FS-353.html

More historic infos can be found here:
http://article.gmane.org/gmane.comp.telephony.freeswitch.devel/2715
https://freeswitch.org/the-missing-link/

In the 1.6.7 version bump libvpx & libyuv were also moved in-tree:
https://freeswitch.org/stash/projects/FS/repos/freeswitch/commits/febe0f8dacea2d2a31902b3dc469be757f8c3c4d
https://freeswitch.org/stash/projects/FS/repos/freeswitch/commits/44da905b4f6b3b35e94b4948fb70dec7b5071ded

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

file: bump to version 5.26

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gutenprint: add optional libusb support

As the recent build issues have shown, gutenprint has optional libusb
support so ensure it is built after libusb if enabled for consistent
builds.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/cmake: bump version to 3.5.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gutenprint: fix host build

Disable USB support when CUPS disabled, otherwise host build breaks.
Fixes following autobuild error:
http://autobuild.buildroot.net/results/081b3be918ac1eaa8cfbc5919e00bc1ea267c1df/

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas:
 - use Git formatted patch, cherry-picked from upstream
 - remove --without-libusb, not needed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gstreamer1: fix help text typos

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gadgetfs-test: add a hash file

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libeXosip2: add a hash file

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Revert "core: add the possibility to provide help for custom rules"

This reverts commit 84c825f8e893bfb56847ab4a880c46066a41744f.

Turns out that the custom help is not available when the $(O) directory
has not been configure yet (i.e. when there is no .config already
filled).

Rather than trying to work around this limitation with dirty hacks, just
revert this feature. After all, this will not prevent an external.mk
from providing custom help anyway; it's just not gonna be advertised nor
displayed with the main help.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Revert "core: also display the custom help with our main help"

This reverts commit 0a767deba004c920e7824543380cffbb298507f8.

Turns out that the custom help is not available when the $(O) directory
has not been configure yet (i.e. when there is no .config already
filled).

Rather than trying to work around this limitation with dirty hacks, just
revert this feature. After all, this will not prevent an external.mk
from providing custom help anyway; it's just not gonna be advertised nor
displayed with the main help.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/stm32f469_disco: new configuration for STM32F469 Discovery board

Similar to stm32f429_disco, this commit adds a configuration for the
Cortex-M4 based STM32F469 platform.

It requires a few kernel patches, which have already been submitted
upstream, as well as a small OpenOCD patch. Besides that, it re-uses
most of what has been added for the STM32F429 platform.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Thomas:
 - squash multiple patches from Lee Jones into one
 - improve the readme.txt file
 - sync the defconfig with the adaptations made to the stm32f429
   configuration.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/stm32f429_disco: new configuration for STM32F429 Discovery board

This commit adds a defconfig for the STM32F429 platform, which is
based on a Cortex-M4 core from ST Microelectronics. It is therefore
the first noMMU ARM platform supported in Buildroot.

This commit includes some files that will be common to several STM32
platforms (hence in board/stmicroelectronics) and some files that are
specific to the STM32F429 (hence in
board/stmicroelectronics/stm32f429-disco). More specifically, this
commit adds:

 - A minimal Busybox configuration, which is small enough to boot
   without causing OOM on such small noMMU platforms. The resulting
   Busybox, statically linked with uClibc-ng, weights around 220
   KB. For now, this file is located in board/stmicroelectronics/, but
   we might consider moving it to package/busybox/ in the future if
   needed.

 - A post-build script that removes the mounting of /dev/pts (not
   enabled in the kernel and not very useful for a system that has no
   network and no X), and removes the network related init script and
   configuration files (no network support).

 - A flash.sh script, to perform the right OpenOCD invocations to
   reflash the board.

 - One small kernel patch to adjust the kernel command line in the
   Device Tree, since it's the only way to do so.

 - The usual readme.txt file.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Thomas:
 - squashed multiple patches from Lee Jones together
 - added the minimal Busybox configuration
 - added the post-build script
 - improved the flashing script to not hardcode the location of the
   output directory
 - add the small kernel patch
 - improve the readme.txt file
 - test on HW the resulting image, after using the internal toolchain.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

afboot-stm32: use the Buildroot toolchain

By default, the afboot-stm32 Makefile uses "CROSS_COMPILE =
arm-none-eabi-". Since I had such a toolchain installed on my system
when testing afboot-stm32, I didn't realize it wasn't using the
Buildroot toolchain.

However, using the Buildroot toolchain doesn't immediately works for
FLAT toolchains, as gcc automatically wants to create a FLAT
binary. So we need to adjust the afboot-stm32 Makefile to use directly
'ld' and not 'gcc' when linking.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

elf2flt: use new upstream site and bump version

The uClinux developers now have a Github with elf2flt code, with an
upstream that is again active. Let's switch to this upstream, which
has built-in support for ARM noMMU, contributed by Waldemar.

Since we're now fetching from github, a hash file is added as well.

Finally, we disable -Werror to avoid build issues caused by warnings.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-pexpect: new package

Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
 - fix hash file
 - fix <pkg>_SITE variable
 - remove runtime only dependency from .mk file, as suggested by Yegor
   Yefremov]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-ptyprocess: new package

Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
[Thomas:
 - fix hash file
 - fix <pkg>_SITE variable.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-pysocks: new package

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

yajl: fix static linking in a parallel build

The yajl build system contains a race condition, which gets triggered by
high BR2_JLEVEL settings - It tries to link the executable gen-extra-close
against the shared libyajl before it is created:

[ 21%] Linking C executable gen-extra-close
[ 26%] Building C object src/CMakeFiles/yajl_s.dir/yajl_buf.c.o
/home/test/autobuild/instance-3/output/host/opt/ext-toolchain/bfin-uclinux/bfin-uclinux/bin/ld.real: cannot find -lyajl

Fix this issue by linking gen-extra-close against the shared library in a shared
build and the static library otherwise.
Apply this to all other build targets from yail who are linking against the
library, too.

Fixes:
http://autobuild.buildroot.net/results/a9b/a9b5209377acb51e69f376e0c008ee71fe00397a/
http://autobuild.buildroot.net/results/55f/55fe22463d49addb42b635d10be5176522f4a561/
http://autobuild.buildroot.net/results/808/808acca0cfed93465845c2aa055a7a4fc56a8a17/
http://autobuild.buildroot.net/results/b92/b92a9c84b71a8a2d022d307245ca6be36a000e6c/
http://autobuild.buildroot.net/results/55d/55df698ab53f7d94235166e8576eb681ed68668e/
.. and more.

Upstream status: Pending
https://github.com/lloyd/yajl/pull/187

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdk-pixbuf: use host loaders to update the cache

Unfortunately gdk-pixbuf-query-loaders doesn't understand cross loaders
to update the cache, hence we can't use the host variant against target
loaders since it will output an effectively empty cache, causing runtime
failure of libgtk when finding icons.
So make host-gdk-pixbuf functionally equivalent to the target gdk-pixbuf
so we can run gdk-pixbuf-query-loaders against the host plugins and just
strip the host directory to make it runtime-compatible (like was done
before for the target directory).

This is still better than trying to update at runtime, since that would
require a writable loaders.cache file in tmpfs or rw filesystem, not to
mention the associated additional startup time.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tiff: add host variant

Add host variant to be used by host-gdk-pixbuf to update the loaders
cache.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gtkmm3: bump to version 3.20.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

freescale_imx6sxsabresd_defconfig: fix kernel headers version

Fixes https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/123187910

Commit 1e5bc05a04d (configs: freescale_imx6*: bump version to
3.14.52-1.1.0_ga) updated the kernel but forgot to change the kernel headers
version to match.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

s6lx9_microboard_defconfig: lock kernel version

Fixes https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/123187960

The defconfig broke after we moved the default kernel version to 4.5.x. Fix
it by locking the kernel version in the defconfig.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/raspberrypi2_defconfig: configure eth0 through dhcp

The rpi2 board has an ethernet port, so configure it at startup.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/raspberrypi_defconfig: configure eth0 through dhcp

The rpi board has an ethernet port, so configure it at startup.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/minnowboard_max: configure eth0 through dhcp

The minnowboard max board has an ethernet port, so configure it at startup.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

connman: add patch to fix build with headers >= 4.5

Add a patch from Gentoo that fixes the build on linux headers >= 4.5
The probem arises from an incompatibility in newer headers when both
net/if.h and linux/if.h are included in the same source.
See https://bugs.gentoo.org/show_bug.cgi?id=577584

Fixes:
http://autobuild.buildroot.net/results/48e/48e6f34a7940f52d987db47784c0d9e82f39de7c/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Makefile: reset LD and AR environment variables

The goal is to fix the compilation of perf (from linux) when LD or AR
variables are inherited from the environment.
After the linux upstream commits 5ef7bbb09f7b ("perf tools: Allow to
specify custom linker command") and 3c71ba3f80bb ("perf tools: Really allow
to specify custom CC, AR or LD") CC, AR, and LD variables are not overridden
if they are inherited.

In case of a cross compilation, it results in an inconsistent state: CC is
overridden but not LD and AR.

Linux-patch: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=5ef7bbb09f7b
Linux-patch: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=3c71ba3f80bb

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cannelloni: bump to version 20160414

Fixes:
http://autobuild.buildroot.net/results/5e9/5e9b44435522a26ad080b7810536686cc1e47c0f/

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luvi: bump to version 2.7.0

Add a patch from upstream [1] to fix CMake build error when building with option
"WithSharedLibluv=ON".

[1]
https://github.com/luvit/luvi/commit/35c3961d10d3f9e3752102ea8e8bb8c187b32241

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

quazip: bump to version 0.7.2

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt: fix static linking

`-ldl` option is used unconditionally in `QMAKE_LIBS_DYNLOAD` while libdl is
not supported when libc is static. As the value of `QMAKE_LIBS_DYNLOAD` goes
into 'Libs.private' field of the pkgconfig files created by qmake, static
linking with qt will fail with:
  /usr/bin/ld: cannot find -ldl

Fix this issue by adding a build test to configure to check if libdl is
supported. `QMAKE_LIBS_DYNLOAD` in "src/corelib/plugin/plugin.pri" is now used
only if libdl is available.

Fixes:
http://autobuild.buildroot.net/results/459/4596b9c69cbc387f1071c730aaac76723afaa853/
http://autobuild.buildroot.net/results/459/4596b9c69cbc387f1071c730aaac76723afaa853/

Backported from Qt5:
https://github.com/qtproject/qtbase/commit/f669ea0d54302de31456d57286aa0e4ca1443e98

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt: Fix musl build

This helps to make sure that QT_SOCKLEN_T is defined to be 'int' only for legacy
glibc < 2 and not also for other libraries which may define it as per standards
but are not glibc, e.g. musl.

Fixes the following build error:
In file included from ../../include/QtNetwork/private/qnet_unix_p.h:1:0,
                 from kernel/qnetworkinterface_unix.cpp:46:
../../include/QtNetwork/private/../../../src/network/socket/qnet_unix_p.h: In function 'int qt_safe_accept(int, sockaddr*, int*, int)':
../../include/QtNetwork/private/../../../src/network/socket/qnet_unix_p.h:121:76: error: invalid conversion from 'int*' to 'socklen_t* {aka unsigned int*}' [-fpermissive]

Fixes:
http://autobuild.buildroot.net/results/709/709d547699596d09b4601a7940677d2010adeedf/
http://autobuild.buildroot.net/results/f05/f0589e1d06404a7bd57f5734228afe45164e553d/

Backported from Qt5:
https://github.com/qtproject/qtbase/commit/813f468a14fb84af43c1f8fc0a1430277358eba2

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

memcached: fix musl build

Add a patch fixing pre-processor warnings that breaks the build. The patch is
pending upstream.

Fixes:

 http://autobuild.buildroot.org/results/ee9bdcad1c2d392558812c5ec185e92c20ed5340/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

glibc: remove version 2.21 stray patches

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uboot-tools: bump to version 2016.03

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imlib2: security bump to version 1.4.8

Fixes:
CVE-2016-3994 - out of bound read in GIF loader
CVE-2011-5326 - divide by zero on 2x1 ellipse

Switch to sourceforge hashes.
And drop all previous patches, they're upstream, yay.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>