Bjørn Forsman [Wed, 26 Jan 2011 21:18:43 +0000 (22:18 +0100)]
Add CMAKETARGETS infrastructure for CMake packages
The CMAKETARGETS infrastructure makes adding CMake-based packages to
Buildroot easy. It uses the same set of variables as the autotools
infrastructure, except for autoreconf and libtool stuff which is not
needed. Usage: just call CMAKETARGETS instead of AUTOTARGETS.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bjørn Forsman [Wed, 26 Jan 2011 21:18:42 +0000 (22:18 +0100)]
Makefile: generate CMake toolchain-file in $(O)
A CMake toolchain-file makes it easy to develop CMake-based packages
outside of Buildroot. Just give the toolchain-file to CMake via the
-DCMAKE_TOOLCHAIN_FILE=... option.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Wed, 26 Jan 2011 16:51:33 +0000 (17:51 +0100)]
lzo: build shared library for host and target
Based on patch by Michael J. Hammel.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thomas Petazzoni [Wed, 26 Jan 2011 08:27:03 +0000 (09:27 +0100)]
zlib: disable call to ldconfig
By default, zlib installation procedure calls ldconfig, which takes
time uselessly. ldconfig is only useful if you install libraries on
the host (in directories listed in /etc/ld.so.conf, or in /usr/lib or
/lib), so calling it after installing libraries in $(STAGING_DIR),
$(TARGET_DIR) or $(HOST_DIR) is just a lenghty no-op.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Wed, 26 Jan 2011 13:53:35 +0000 (14:53 +0100)]
autoconf: don't append -dirty to version number if built in buildroot git tree
Autoconf would append -dirty to it's version number, causing build breakage
with packages explicitly requesting autoconf 2.65, if built in a subdir
of a git tree with uncommitted changes. This is a relatively common
situation when developing on BR.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Wed, 26 Jan 2011 13:49:00 +0000 (14:49 +0100)]
Use 'sysroot' rather than 'sys-root' for the sysroot/staging_dir
As pointed out on the list, using sysroot rather than sys-root is less
confusing, as this is how it is referred to in the GCC manual.
So rather than changing BR, patch ct-ng to use sysroot instead.
The next ct-ng release will use 'sysroot' as well by default.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Wed, 26 Jan 2011 11:09:42 +0000 (12:09 +0100)]
kernel-headers: handle long term support kernels, bump 2.6.35
2.6.34 was (erroneously) already updated earlier.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Wed, 26 Jan 2011 11:07:36 +0000 (12:07 +0100)]
kernel-headers: get rid of deprecated 2.6.32 / 2.6.33 versions
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Wed, 26 Jan 2011 10:18:50 +0000 (11:18 +0100)]
package: fix python upgrade fallout
A number of packages depended on the libpython make target for python
support, which no longer exist.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Wed, 26 Jan 2011 10:16:46 +0000 (11:16 +0100)]
sysvinint: bump Debian patch
-13 patch no longer available on the Debian mirrors.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Wed, 26 Jan 2011 10:08:34 +0000 (11:08 +0100)]
lvm2: use official release location as arranged with upstream
See http://www.redhat.com/archives/lvm-devel/2011-January/msg00002.html
for details.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Heiko Zuerker [Sat, 25 Dec 2010 16:10:58 +0000 (10:10 -0600)]
lvm2: bump version to 2.02.79 (.78 was pulled by Redhat)
Signed-off-by: Heiko Zuerker <smiley73@users.sourceforge.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Tue, 25 Jan 2011 21:07:14 +0000 (22:07 +0100)]
crosstool-ng: don't remove installation directory before installing
crosstool-ng would normally delete its installation directory before
installing the toolchain to ensure it wouldn't get confused by an earlier
build. Now that we're installing directly into HOST_DIR/usr, this doesn't
work very well - So get rid of the rm's.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Tue, 25 Jan 2011 15:24:46 +0000 (16:24 +0100)]
Merge branch 'for-2011.02/python-bump' of git://git.busybox.net/~tpetazzoni/git/buildroot
Thomas Petazzoni [Tue, 25 Jan 2011 08:46:58 +0000 (09:46 +0100)]
tcpdump, libpcap: simplify and fix ac_cv_linux_vers
For some reason, tcpdump and libpcap need to have some information
about the kernel version being used. This information is passed using
the ac_cv_linux_vers autoconf variable.
However, the current value is determined using
BR2_DEFAULT_KERNEL_HEADERS which is only defined when an internal
Buildroot toolchain is used. So it would break with an external
toolchain or the Crosstool-NG backend.
According to Mike Frysinger at
http://lists.busybox.net/pipermail/buildroot/2011-January/040861.html,
this value is only used to determine if the kernel version is 0.x, 1.x
or 2.x, so passing ac_cv_linux_vers=2 is sufficient since Buildroot
only supports the 2.6 kernel anyway.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Tue, 25 Jan 2011 15:06:43 +0000 (16:06 +0100)]
crosstool-ng: install toolchain into HOST_DIR like the internal toolchain
Simplifies code and helps us when we add SDK support in the future.
With this we no longer need to copy headers/libraries to STAGING_DIR either.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Tue, 25 Jan 2011 15:03:14 +0000 (16:03 +0100)]
crosstool-ng: Use same naming convention as internal toolchains
Use unknown for the vendor part of the tuple, and add $arch-linux- symlinks,
similar to how it's done for the internal toolchain, rather than using
buildroot_ctng and unknown symlinks.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Tue, 25 Jan 2011 15:01:25 +0000 (16:01 +0100)]
package/Makefile.in: Fix LIBC calculation for internal ct-ng toolchains
Use uclibc for internal ct-ng toolchains configured with uClibc as well.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Tue, 25 Jan 2011 14:58:04 +0000 (15:58 +0100)]
Use sys-root rather than sysroot for the sysroot/staging_dir
The name of the sysroot directory is arbitrary, but as ct-ng uses sys-root,
let's use that as well for consistency.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thomas Petazzoni [Tue, 11 Jan 2011 20:46:44 +0000 (21:46 +0100)]
python-mad: new package
python-mad is a Python binding for the MAD library, a high-quality
integer-only MPEG decoder.
This package has been introduced as a test to make sure that
third-party Python modules that rely on a C extension can properly be
built against the Python infrastructure of Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 11 Jan 2011 20:45:55 +0000 (21:45 +0100)]
python-serial: new package
python-serial is a Python library to access serial ports.
This package has originally been introduced to test that third-party
pure Python modules (that do not use C extensions) build properly
against the Buildroot Python infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 11 Jan 2011 20:44:29 +0000 (21:44 +0100)]
Remove .py or .pyc depending on Python configuration
We do this at a global level since several packages can install
Python modules.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sun, 26 Dec 2010 09:28:49 +0000 (10:28 +0100)]
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sun, 23 Jan 2011 16:08:53 +0000 (17:08 +0100)]
autotools: allow host package to use <pkg>_MAKE_ENV and <pkg>_MAKE
This will be needed by the Python interpreter package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 8 Jan 2011 14:15:24 +0000 (15:15 +0100)]
libffi: new package
libffi is needed by the Python interpreter.
The libffi library provides a portable, high level programming
interface to various calling conventions. This allows a programmer to
call any function specified by a call interface description at
run-time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Maxime Ripard [Tue, 14 Dec 2010 22:02:22 +0000 (23:02 +0100)]
python: Fix make install (Workaround python's bug #
1669349)
Signed-off-by: Maxime Ripard <ripard@archos.com>
Maxime Ripard [Fri, 10 Dec 2010 22:13:36 +0000 (23:13 +0100)]
python: Add the needed patches to compile python2.7 in buildroot.
Signed-off-by: Maxime Ripard <ripard@archos.com>
Maxime Ripard [Fri, 10 Dec 2010 22:05:39 +0000 (23:05 +0100)]
python: Port the python2.4 patches to 2.7
Signed-off-by: Maxime Ripard <ripard@archos.com>
Maxime Ripard [Tue, 12 Oct 2010 08:26:53 +0000 (10:26 +0200)]
python: Move to version 2.7
Signed-off-by: Maxime Ripard <ripard@archos.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Peter Korsgaard [Mon, 24 Jan 2011 20:11:36 +0000 (21:11 +0100)]
sshfs: adjust make dependencies to match Kconfig
Spotted by Thomas, thanks.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Mon, 24 Jan 2011 16:04:28 +0000 (17:04 +0100)]
busybox: 1.18.2 fix for wc
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Felipe Contreras [Sun, 23 Jan 2011 22:41:30 +0000 (00:41 +0200)]
gstreamer: remove unnecessary feature
On 0.10.11 the binary-registry was added, on 0.10.12 the libxml2
dependency was dropped when binary-registry was used, on 0.10.18 the
binary-registry was made default, and on 0.10.23 it was the only option.
So, libxml2 is not needed any more for the registry.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Thu, 20 Jan 2011 20:49:42 +0000 (17:49 -0300)]
mpd: new package
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Tue, 18 Jan 2011 16:54:38 +0000 (13:54 -0300)]
musepack: new package
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Tue, 18 Jan 2011 16:54:36 +0000 (13:54 -0300)]
libcuefile: new package
[Peter: fix build with ccache]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Thu, 20 Jan 2011 20:23:23 +0000 (21:23 +0100)]
cdrkit: fix build with ccache
Cmake gets confused about ccache, so don't use ccache for cmake builds.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Thu, 20 Jan 2011 20:22:53 +0000 (21:22 +0100)]
toolchain/uClibc: bump 0.9.32 version to 0.9.32-rc2
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Thu, 20 Jan 2011 14:26:28 +0000 (15:26 +0100)]
CHANGES: update with recent changes
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Tue, 18 Jan 2011 16:54:37 +0000 (13:54 -0300)]
libreplaygain: new package
[Peter: add comment about why we need autoreconf]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Thu, 20 Jan 2011 13:32:36 +0000 (10:32 -0300)]
wavpack: new package
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Tue, 18 Jan 2011 16:54:39 +0000 (13:54 -0300)]
faad2: new package
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Tue, 18 Jan 2011 16:54:35 +0000 (13:54 -0300)]
libsamplerate: new package
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Tue, 18 Jan 2011 16:54:33 +0000 (13:54 -0300)]
libmad: install pkgconfig file
Make libmad install mad.pc into staging and target.
Needed for mpd.
[Peter: remove -lm from mad.pc]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Tue, 18 Jan 2011 16:54:32 +0000 (13:54 -0300)]
libsndfile: bump to version 1.0.23
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Tue, 18 Jan 2011 16:54:31 +0000 (13:54 -0300)]
mpg123: install to staging
mpg123 also provides a shared library (libmpg123.so), so install into
staging so other programs can find it.
[Peter: reworded commit message]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Mike Frysinger [Mon, 10 Jan 2011 14:28:45 +0000 (09:28 -0500)]
tcpdump: add patch for nommu systems
[Peter: slightly tweak patch]
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Mike Frysinger [Mon, 10 Jan 2011 14:28:44 +0000 (09:28 -0500)]
portmap: fix clean target to actually clean
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Mike Frysinger [Mon, 10 Jan 2011 14:28:43 +0000 (09:28 -0500)]
portmap: respect target CFLAGS
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Mike Frysinger [Tue, 11 Jan 2011 18:00:17 +0000 (13:00 -0500)]
portmap: add nommu support
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Mon, 17 Jan 2011 12:13:42 +0000 (09:13 -0300)]
toolchain: only fetch gcc/gmp/mpfr/mpc when using a buildroot toolchain
Closes #3103
gcc/gmp/mpfr/mpc are only needed when using an internal buildroot toolchain,
so only add them to HOST_SOURCE then.
Otherwise we get some nasty fetch error when doing "make source"
[Peter: add gmpc/mpfr/mpc and reword commit text]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Wed, 19 Jan 2011 08:08:45 +0000 (09:08 +0100)]
busybox: add 1.18.2 fixes
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Kim Jae-hui [Tue, 18 Jan 2011 08:20:38 +0000 (09:20 +0100)]
busybox: fix busybox-menuconfig after
69df644f5
Closes #3109
Pass the correct -C <dir> option to make menuconfig.
Signed-off-by: Kim Jae-hui <twinkle.j4k@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Fri, 14 Jan 2011 14:28:26 +0000 (11:28 -0300)]
openvpn: bump to version 2.1.4
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Fri, 14 Jan 2011 13:43:24 +0000 (10:43 -0300)]
openssl: add ocf support
Enable OCF (cryptodev) support for openssl as an option.
This requires a patched kernel to export hardware acceleration for
openssl to use it.
If you lack a patched kernel or support it won't break anything, it will
simply fall back to the default software engine from openssl, you'll
just have a slightly bigger libssl/libcrypto.
Tested with
20100325 release +
20101223 patch from the mailing list.
[Peter: slightly tweaked .mk]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Fri, 14 Jan 2011 11:53:45 +0000 (08:53 -0300)]
coreutils: bump to version 8.9
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Wed, 12 Jan 2011 18:21:05 +0000 (15:21 -0300)]
gperf: bump to version 3.0.4
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Tue, 11 Jan 2011 18:32:31 +0000 (15:32 -0300)]
smartmontools: bump to version 5.40
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Tue, 11 Jan 2011 18:10:38 +0000 (15:10 -0300)]
sysstat: bump to version 9.1.7
Includes some new metrics for sar (amount of active and inactive memory,
processes blocked waiting for I/O to complete).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Tue, 11 Jan 2011 17:38:24 +0000 (14:38 -0300)]
bash: build after busybox
Make sure bash builds after busybox when it's enabled to override
busybox's /bin/sh symlink with bash.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Tue, 11 Jan 2011 17:26:26 +0000 (14:26 -0300)]
wipe: convert to gentargets and bump to version 0.22
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Fri, 7 Jan 2011 19:38:24 +0000 (16:38 -0300)]
mpg123: bump to version 1.13.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Fri, 7 Jan 2011 18:59:04 +0000 (15:59 -0300)]
php: security bump to 5.2.17
PHP bug #53632 and CVE-2010-4645, where conversions from string to
double might cause the PHP interpreter to hang on systems using x87 FPU
registers.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Fri, 7 Jan 2011 18:20:40 +0000 (15:20 -0300)]
ntfs-3g: bump to version 2010.10.2
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Fri, 7 Jan 2011 18:19:03 +0000 (15:19 -0300)]
sshfs: select openssh instead of depending
Select openssh in Config.in rather than depend on it.
Otherwise the option is missing without an obvious reason.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Fri, 7 Jan 2011 18:18:26 +0000 (15:18 -0300)]
libfuse: bump to version 2.8.5
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Fri, 7 Jan 2011 18:05:27 +0000 (15:05 -0300)]
psmisc: bump to version 22.13
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Fri, 7 Jan 2011 17:43:40 +0000 (14:43 -0300)]
hdparm: bump to version 9.36
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Fri, 7 Jan 2011 17:43:02 +0000 (14:43 -0300)]
lm-sensors: bump to version 3.2.0
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Fri, 7 Jan 2011 17:42:48 +0000 (14:42 -0300)]
i2c-tools: bump to version 3.0.3
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Fri, 7 Jan 2011 17:38:31 +0000 (14:38 -0300)]
dosfstools: bump to version 3.0.11
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Sun, 16 Jan 2011 19:12:38 +0000 (20:12 +0100)]
busybox: bump 1.18.x version
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Sat, 15 Jan 2011 20:21:16 +0000 (21:21 +0100)]
toolchain-common.in: Fix USE_MMU typo
Thanks to Marc Gauthier for noticing.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
H Hartley Sweeten [Tue, 30 Nov 2010 01:22:20 +0000 (18:22 -0700)]
package: Add libsigc++ package
Add support for the libsigc++ library.
[Peter: Rename dir, use libtool patch, add C++ dep]
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Mike Frysinger [Mon, 10 Jan 2011 14:28:41 +0000 (09:28 -0500)]
toolchain: add a USE_MMU build option
Some packages need to know whether the MMU is in play, so add a toolchain
option to expose the feature to them.
[Peter: only show option on archs where it makes sense]
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Sat, 15 Jan 2011 12:01:25 +0000 (13:01 +0100)]
docs: remove outdated files
Misleading/outdated docs is worse than no documentation.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Andy Kennedy [Fri, 14 Jan 2011 21:53:03 +0000 (15:53 -0600)]
kexec: bump to version 2.0.2 + change URL to match
Closes #3007
Changed the KEXEC_SITE to the new home of kexec. This patch also satisfies
bug #3007 created by me last month. Thanks to Gustavo for pointing out that
the easy fix was to bump kexec to 2.0.2.
Signed-of-by: Andy Kennedy <Andy.Kennedy@AdTran.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Matt Fleming [Fri, 24 Sep 2010 13:43:17 +0000 (14:43 +0100)]
makedevs: Add support for 16-bit major/minor numbers
Closes #2647
[Peter: Adjust for the real 12bit majors/20bit minors supported by Linux]
Signed-off-by: Matt Fleming <matthew.fleming@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Fri, 14 Jan 2011 21:02:47 +0000 (22:02 +0100)]
CHANGES: update with recent changes
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Mike Frysinger [Wed, 8 Dec 2010 05:07:16 +0000 (00:07 -0500)]
irda-utils: new package for IrDA devices
[Peter: Small tweaks, add patch descriptions]
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Fri, 14 Jan 2011 10:16:09 +0000 (11:16 +0100)]
fs/jffs2: remove BR2_JFFS2_TARGET_SREC option
This kind of custom image conversion is better handled outside BR.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Fri, 14 Jan 2011 10:14:05 +0000 (11:14 +0100)]
fs/ext2: remove redundant BR2_TARGET_ROOTFS_EXT2_SQUASH option
The generic fs handling does a chmod -R 0:0 $(TARGET_DIR), so there's no
need for a specific option to enforce this when making an ext2fs image.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Fri, 14 Jan 2011 10:03:49 +0000 (11:03 +0100)]
fs/tar: enable by default
This way we'll get something in images/ by default, and hopefully people
will be less likely to try to use target/ directly.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Fri, 14 Jan 2011 09:03:13 +0000 (10:03 +0100)]
fs/ext2: don't enable by default
It's pretty uncommon to use ext2fs on embedded systems, so don't enable
it by default.
Adjust defconfigs to match.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Fri, 14 Jan 2011 08:59:06 +0000 (09:59 +0100)]
uClibc: 0.9.32-rc1 netlinkaccess fix
From uClibc git, fixes build issue on powerpc.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Martin Banky [Thu, 30 Sep 2010 19:03:36 +0000 (12:03 -0700)]
coreutils: add uname patch
On linux platforms, grok /proc/cpuinfo for the CPU/vendor info.
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Martin Banky [Thu, 30 Sep 2010 19:03:35 +0000 (12:03 -0700)]
coreutils: changed/removed some of the configure environmental variables
gl_ac_cv_func_link_follows_symlink=no - changed to gl_cv_func_link_follows_symlink
gl_cv_func_mkdir_trailing_slash_bug=no - no longer used
gl_cv_func_rename_dest_exists_bug=no - no longer used
gl_cv_func_rename_trailing_slash_bug=no - no longer used
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Martin Banky [Thu, 30 Sep 2010 19:03:34 +0000 (12:03 -0700)]
coreutils: bump to 8.5
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Martin Banky [Thu, 30 Sep 2010 19:03:33 +0000 (12:03 -0700)]
coreutils: fixed missing hostname
hostname is no longer installed by default (ChangeLog-2007 - 2007-08-28), and
has to be enabled with --enable-install-program=hostname. hostname's man file is
not included, and because of this, during make, help2man is run against
src/hostname to generate it's man file. src/hostname will not run on the host
system, causing the build to fail.
Generated the hostname man file, after building coreutils on the host
system, and generated this patch, which fixes the build error.
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Martin Banky [Thu, 30 Sep 2010 19:03:32 +0000 (12:03 -0700)]
coreutils: changed/removed some of the configure environmental variables
ac_cv_func_closedir_void=no - no longer used
ac_cv_func_fnmatch_gnu=yes - no longer used
ac_cv_func_getcwd_null=yes - duplicate of gl_cv_func_getcwd_null
ac_cv_func_mkstemp=yes - changed to gl_cv_func_working_mkstemp
ac_cv_func_stat_empty_string_bug=no - no longer used
ac_cv_func_utime_null=yes - no longer used
ac_cv_have_decl_euidaccess=no - no longer used
ac_cv_have_decl_nanosleep=yes - no longer used
ac_cv_struct_st_mtim_nsec=no - no longer used
am_cv_func_working_getline=yes - duplicate
am_getline_needs_run_time_check=no - changed to gl_getline_needs_run_time_check
gl_cv_c_restrict=no - changed to ac_cv_c_restrict
gl_cv_func_mkstemp_limitations=no - no longer used
gl_cv_func_working_readdir=yes - no longer used
jm_ac_cv_func_link_follows_symlink=no - changed to gl_ac_cv_func_link_follows_symlink
jm_cv_func_gettimeofday_clobber=no - changed to gl_cv_func_gettimeofday_clobber
jm_cv_func_nanosleep_works=yes - no longer used
jm_cv_func_svid_putenv=yes - changed to gl_cv_func_svid_putenv
jm_cv_func_working_re_compile_pattern=yes - changed to gl_cv_func_re_compile_pattern_working
utils_cv_func_mkdir_trailing_slash_bug=no - duplicate of gl_cv_func_mkdir_trailing_slash_bug
utils_cv_func_mkstemp_limitations=no - duplicate of gl_cv_func_mkstemp_limitations
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Martin Banky [Thu, 30 Sep 2010 19:03:31 +0000 (12:03 -0700)]
coreutils: convert to autotarget
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Wed, 12 Jan 2011 23:18:02 +0000 (00:18 +0100)]
Update copyright info for 2011
Happy newyear!
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Julien Boibessot [Tue, 21 Dec 2010 17:38:07 +0000 (18:38 +0100)]
ubifs: Add UBI image generation support.
UBI images are generated from UBIFS one (with ubinize tool) and are used by
bootloaders (eg U-Boot) to write UBIFS images directly on bare NAND FLASH
(see http://www.linux-mtd.infradead.org/faq/ubi.html).
[Peter: tweak help text]
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Nicolas Colombain <nicolas.colombain@armadeus.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Tue, 11 Jan 2011 13:49:56 +0000 (10:49 -0300)]
target skeleton: add audio group
Add audio group to the target skeleton.
Some multimedia applications based on alsa-lib need it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Thu, 6 Jan 2011 18:42:01 +0000 (15:42 -0300)]
vorbis-tools: new package
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Tue, 11 Jan 2011 13:45:30 +0000 (10:45 -0300)]
libao: new package
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Mike Frysinger [Mon, 10 Jan 2011 14:28:40 +0000 (09:28 -0500)]
busybox: let buildroot handle stripping
For some ABI's (like FLAT), we cannot strip busybox as the file format
does not support it and strip will abort with errors like 'File format
not recognized'. Since the toplevel already takes care of stripping
things, simply disable the busybox step.
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Mike Frysinger [Mon, 10 Jan 2011 14:28:39 +0000 (09:28 -0500)]
busybox: unify duplicated build steps
This does set a few more vars in some steps that weren't set before, but
they should be harmless in the contexts in question. And the resulting
save in duplication is nice.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Tue, 11 Jan 2011 06:56:22 +0000 (07:56 +0100)]
iptables: remove redundant --disable-ipv6
Is automatically handled by the autotargets infrastructure.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Mon, 10 Jan 2011 17:41:25 +0000 (14:41 -0300)]
iproute2: bump to version 2.6.37 + fixes
Bump to version 2.6.37
Add iptables support when it's available.
ATM support requires linux-atm for which we don't have a package yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gustavo Zacarias [Mon, 10 Jan 2011 17:41:24 +0000 (14:41 -0300)]
iptables: install to staging
Install iptables to staging so we can build iproute2 with filtering.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
projects / buildroot.git / log