Bernd Kuhls [Wed, 20 Jun 2018 20:33:43 +0000 (22:33 +0200)]
package/erlang: bump version to 21.0
Release notes: http://www.erlang.org/news/123
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Wed, 20 Jun 2018 19:58:04 +0000 (21:58 +0200)]
package/berkeleydb: fix build error with gcc8
Fixes
../src/dbinc/atomic.h:179:19: error: definition of 'int __atomic_compare_exchange(db_atomic_t*,
atomic_value_t, atomic_value_t)' ambiguates built-in declaration 'bool
__atomic_compare_exchange(unsigned int, volatile void*, void*, void*, int, int)'
static inline int __atomic_compare_exchange(
^~~~~~~~~~~~~~~~~~~~~~~~~
To reproduce the build error use this defconfig
BR2_GCC_VERSION_8_X=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_BERKELEYDB=y
BR2_PACKAGE_BERKELEYDB_COMPAT185=y
BR2_PACKAGE_BERKELEYDB_TOOLS=y
Please note that to trigger the error BR2_TOOLCHAIN_BUILDROOT_CXX=y
is needed although berkeleydb does not depend on c++.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabio Estevam [Tue, 19 Jun 2018 23:32:00 +0000 (20:32 -0300)]
configs/mx51evk: Bump U-Boot and kernel
Bump U-Boot to 2018.05 and kernel to 4.17.2 versions.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Max Filippov [Tue, 19 Jun 2018 20:27:06 +0000 (13:27 -0700)]
gcc: fix uclibc runtime issue with gcc-8 for xtensa
gcc-8.1 for xtensa miscompiles uClibc dynamic linker due to gcc PR
target/65416. The build completes successfully, but the binary is
non-functional because the following fragment in the _dl_get_ready_to_run
in ld-uClibc.so overwrites register spill area on stack causing register
corruption in the previous call frame and a subsequent crash:
419f: f0c1b2 addi a11, a1, -16
41a2: 1ba9 s32i.n a10, a11, 4
41a4: 0bc9 s32i.n a12, a11, 0
41a6: 5127f2 l32i a15, a7, 0x144
41a9: 1765b2 s32i a11, a5, 92
41ac: 4e2782 l32i a8, a7, 0x138
41af: 146af2 s32i a15, a10, 80
41b2: 001b10 movsp a1, a11
The crash terminates the init process and causes kernel panic.
The fix prevents reordering of movsp opcode and any access to the stack
frame memory and is applicable to all existing gcc versions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Tue, 19 Jun 2018 14:44:41 +0000 (17:44 +0300)]
imx-usb-loader: fix build with older gcc
Since the last version bump imx-usb-loader uses __builtin_bswap16 which
is not universally available in gcc older than version 4.8. Add a patch
switching to a local 16-bit bytes swap implementation.
Should fix:
http://autobuild.buildroot.net/results/a63/
a63b593b7ef3b6d32e755afe42b77d47dbf0276e/
http://autobuild.buildroot.net/results/48c/
48c95cfc65f99fa02be81a11303ba8999f57091a/
http://autobuild.buildroot.net/results/c9d/
c9d4f99b49ddb9b2ce08fce7672dd7c70cf62912/
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jörg Krause [Tue, 19 Jun 2018 19:57:19 +0000 (21:57 +0200)]
bluez5_utils: bump to version 5.50
Drop upstream patch and remove `AUTORECONF = YES`.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Tue, 19 Jun 2018 18:19:38 +0000 (20:19 +0200)]
cargo-bin: add hash for powerpc64le
Fixes:
- http://autobuild.buildroot.net/results/
1e790bd13745cc0b3f03e6182e700c07d3b8a21c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Vasant Hegde [Tue, 19 Jun 2018 17:42:35 +0000 (23:12 +0530)]
package/powerpc-utils: Add sha256 hash for the COPYING file
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
CC: Joel Stanley <joel@jms.id.au>
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Mon, 18 Jun 2018 18:06:40 +0000 (20:06 +0200)]
mosquitto: fix build with some glibc
Add patch to define _GNU_SOURCE before using S_IF{DIR,REG}
Fixes:
- http://autobuild.buildroot.net/results/
7dcfb6ca9d14a5cd6872590065549356f1ab42a0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Mon, 18 Jun 2018 20:14:00 +0000 (22:14 +0200)]
package/freeswitch: enable mod_timerfd
Mod_timerfd uses the Linux kernel timerfd API to create and use a kernel
timer that delivers timer expire notifications via a file descriptor,
for details read
https://freeswitch.org/confluence/display/FREESWITCH/mod_timerfd
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Mon, 18 Jun 2018 20:21:08 +0000 (22:21 +0200)]
package/waylandpp: bump version to 0.2.3
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Vasant Hegde [Tue, 19 Jun 2018 06:00:28 +0000 (11:30 +0530)]
powerpc-utils: Bump version to 1.3.5
CC: Joel Stanley <joel@jms.id.au>
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Evgeniy Didin [Tue, 19 Jun 2018 11:30:52 +0000 (14:30 +0300)]
synopsys/axs10x: Update /etc/inittab by post-build
To not maintain custom copy of inittab file lets adopt approach
used in raspberrypi adding post-build script for synopsys/axs10x
boards.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Tue, 19 Jun 2018 11:45:20 +0000 (13:45 +0200)]
docs/website/download.html: fix latest LTS version number
Latest is naturally .3, not .1
Reported-by: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Mon, 18 Jun 2018 18:18:45 +0000 (20:18 +0200)]
jpeg-turbo: bump to version 1.5.3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Mon, 18 Jun 2018 18:16:24 +0000 (20:16 +0200)]
json-for-modern-cpp: bump to version 3.1.2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Mon, 18 Jun 2018 18:14:36 +0000 (20:14 +0200)]
DEVELOPERS: add myself to some packages
Add my entry to json-c, libsoup, libsoxr, libxslt and tinymembench
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Mon, 18 Jun 2018 08:43:27 +0000 (10:43 +0200)]
lvm2: add license hashes
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Mon, 18 Jun 2018 08:38:50 +0000 (10:38 +0200)]
python-decorator: add license file and hash
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Mon, 18 Jun 2018 18:19:39 +0000 (20:19 +0200)]
docs/website: update for 2018.02.3
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Mon, 18 Jun 2018 17:43:04 +0000 (19:43 +0200)]
Update for 2018.02.3
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit
f44524f61ad304e5db7cb933704bb4951ab031d3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Fri, 4 May 2018 16:24:30 +0000 (18:24 +0200)]
Update for 2018.02.2
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit
4acca318b1630b6aa0e1113948e7678dd902b8a3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gaël PORTAY [Wed, 13 Jun 2018 23:44:11 +0000 (19:44 -0400)]
qt5: bump latest version to 5.11.0
qtwayland:
Remove 0001-Fix-compilation-for-Renesas-R-Car-M3.patch (upstream
since [1]).
qtwebengine:
New 3rd-part 0001-Fix-build-with-GCC-8.1.0.patch (upstream in
chromium [2]).
[1]: https://github.com/qt/qtwayland/commit/
8b204b2c56be5e7c1fd21144ae140c9b865dd86b
[2]: https://codereview.qt-project.org/#/c/229160/
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Thu, 14 Jun 2018 18:02:04 +0000 (20:02 +0200)]
pinentry: link with libatomic when needed
On some architectures, atomic binutils are provided by the libatomic
library from gcc. Linking with libatomic is therefore necessary,
otherwise the build fails with:
sparc-buildroot-linux-uclibc/sysroot/lib/libatomic.so.1: error adding symbols: DSO missing from command line
This is often for example the case on sparcv8 32 bit.
Fixes:
http://autobuild.buildroot.net/results/
fd6bee70ff20bee9607a9f6f557a3a793d00cd9f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: use LIBS instead of LDFLAGS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Thu, 14 Jun 2018 18:23:19 +0000 (20:23 +0200)]
tor: link with libatomic when needed
The following error occurs on architectures required to use gcc
libatomic for atomic intrinsics:
sparc-buildroot-linux-uclibc/sysroot/lib/libatomic.so.1: error adding symbols: DSO missing from command line
This is for example the case on sparcv8 32 bit.
Fixes:
http://autobuild.buildroot.net/results/
0f7107d0b703223f567c6749722bc82c81a04d54
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: use LIBS instead of LDFLAGS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Yann E. MORIN [Tue, 29 May 2018 17:31:46 +0000 (19:31 +0200)]
package/ti-sgx-km: properly handle legacy for renamed options
Commit
b54c5464cc (ti-sgx-km: rename options to have proper prefix)
forgot to add defaults from legacy options, and notices in
Config.in.legacy that legacy options are still referenced in the
package itself.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Sun, 10 Jun 2018 18:05:32 +0000 (20:05 +0200)]
libtirpc: fix musl build
Don't redefine existing typedef (u_char, u_long, ...) on musl
Fixes:
- http://autobuild.buildroot.net/results/
dbc07e383605a84eb19a2fd1899668612212518a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Yann E. MORIN [Sun, 10 Jun 2018 15:44:58 +0000 (17:44 +0200)]
support/docker: use the distro-provided flake8
Currently, we install flake8 and its dependencies via pip. We
tried to be reproducible by pinning the version of those python
packages, but we did forget quite a few of them, and thus some
dependencies for flake8 are installed as uncontrolled versions.
Furthermore, before we install flake8 and its dependencies, we
forcibly update pip, setuptools, and wheels packages to their
latest versions. This explicitly breaks reproducibility.
While we could enforce a specific version of all those packages
and still grab them from PyPI, we can simply grab them from the
distribution-provided packages instead.
Since we're using a pinned version of stretch, this already
guarantees we'll reproducibly get the same versions over and
over again. Besides, we just need to list flake8 as a package to
install to automatically get all its dependencies (again, in a
reproducible way).
This has the slight unfortunate drawback of downgrading flake8
to version 3.2.1, from version 3.5.0, as well as downgrading a
few of flake8's dependencies, as noticed by Ricardo:
http://lists.busybox.net/pipermail/buildroot/2018-May/222376.html
However, as Ricardo said, there isn't "any serious limitation of
this old version, the release notes for a version in the between
mentions 'Dramatically improve the performance' but we have a
limited number of scripts and running on Gitlab for all of them
still takes less than 5 minutes".
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Yann E. MORIN [Sun, 10 Jun 2018 15:44:57 +0000 (17:44 +0200)]
support/docker: sort the list of installed packages
As suggested in the docker best practices [0], order the package list
alphabetically, and list only one package per line.
This will be much usefull later, we need to update the list of installed
packages, like adding new ones for example.
[0] https://docs.docker.com/develop/develop-images/dockerfile_best-practices/#sort-multi-line-arguments
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Min Xu [Mon, 11 Jun 2018 18:18:23 +0000 (11:18 -0700)]
shadowsocks-libev: add dependency on sync builtins
libcork (bundled inside shadowsocks-libev) uses the __sync builtins
for atomic operations: the 4-byte variant on 32 bits platforms and the
8-byte variant on 64-bits platform.
Fixes:
http://autobuild.buildroot.net/results/
552b09ffe951c429422529c895f4c3ec723cf5ab
Signed-off-by: Min Xu <xuminready@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sun, 17 Jun 2018 16:26:20 +0000 (18:26 +0200)]
perl-libwww-perl: bump to version 6.34
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Min Xu [Mon, 11 Jun 2018 18:18:22 +0000 (11:18 -0700)]
shadowsocks-libev: add dependency on thread support
shadowsocks-libev needs thread support, otherwise the configure script
fails with:
configure: error: Can not find pthreads. This is required.
Signed-off-by: Min Xu <xuminready@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Min Xu [Mon, 11 Jun 2018 18:18:21 +0000 (11:18 -0700)]
shadowsocks-libev: drop the useless hash
In commit
f8d44394777fb9b45befaee3333d974dfe5e745d
("shadowsocks-libev: new package"), when this package was introduced,
the hash for a license file that isn't available in upstream's tarball
was added to the license file. Obviously, this hash serves no purpose,
so drop it.
Signed-off-by: Min Xu <xuminready@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gary Bisson [Tue, 12 Jun 2018 15:02:21 +0000 (17:02 +0200)]
kernel-module-imx-gpu-viv: bump to version 6.2.4.p1.2
This package has been tested with the following commands:
# modprobe galcore
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gary Bisson [Tue, 12 Jun 2018 15:02:20 +0000 (17:02 +0200)]
imx-gpu-g2d: bump to version 6.2.4.p1.2
Same as imx-gpu-viv, no changelog was provided by NXP.
Tested with the following commands:
# /usr/share/examples/g2d_samples/g2d_multiblit_test
# /usr/share/examples/g2d_samples/g2d_overlay_test
# /usr/share/examples/g2d_samples/g2d_test
# gst-launch-1.0 videotestsrc ! imxg2dvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gary Bisson [Tue, 12 Jun 2018 15:02:19 +0000 (17:02 +0200)]
imx-gpu-viv: enable package for 64-bit i.MX processors
Basically enabling the package for aarch64. One difference with 32-bit
i.MX platforms resides in the fact that Wayland is the only back-end
supported. Therefore X11 and Framebuffer options are masked.
This was tested on i.MX8MQ Nitrogen8M platform (with weston-imx):
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas: drop BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU_WAYLAND_ONLY and
use BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M directly.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gary Bisson [Tue, 12 Jun 2018 15:02:18 +0000 (17:02 +0200)]
imx-gpu-viv: bump to version 6.2.4.p1.2
No changelog was provided by NXP but we can assume it's the latest and
therefore the greatest.
What is known, is that that same version worked both ARM and ARM64.
The support for the latter will be added in a follow-up patch.
This package has been tested with X11, Framebuffer and Wayland
back-ends:
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
# gmem_info
... display memory use per PID ...
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gaël PORTAY [Mon, 11 Jun 2018 13:47:50 +0000 (09:47 -0400)]
libusb: add an option to compile examples
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
[Thomas:
- use make loop instead of shell loop
- use $(INSTALL) instead of cp.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gaël PORTAY [Mon, 11 Jun 2018 13:56:55 +0000 (09:56 -0400)]
qt53d: fix install issue with qt5.6
Both plugins `geometryloaders' and `renderplugins' are available since
Qt 5.9.
Fixes:
>>> qt53d 5.6.3 Installing to target
cp -dpf /home/gportay/src/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libQt53D*.so.*
/home/gportay/src/buildroot/output/target/usr/lib
cp -dpfr /home/gportay/src/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/qt/plugins/geometryloaders
/home/gportay/src/buildroot/output/target/usr/lib/qt/plugins
cp: cannot stat '/home/gportay/src/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/qt/plugins/geometryloaders': No such file or directory
package/pkg-generic.mk:310: recipe for target '/home/gportay/src/buildroot/output/build/qt53d-5.6.3/.stamp_target_installed' failed
make[2]: *** [/home/gportay/src/buildroot/output/build/qt53d-5.6.3/.stamp_target_installed] Error 1
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Gaël PORTAY <<a href="mailto:gael.portay@savoirfairelinux.com" target="_blank" rel="noreferrer">gael.portay@savoirfairelinux.com</a>><br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gaël PORTAY [Mon, 11 Jun 2018 13:54:17 +0000 (09:54 -0400)]
qt5script: fix build issue with 32-bits armv8-a
Adds WTF platform support for the 32-bits armv8-a architectures.
Fixes:
In file included from ../3rdparty/javascriptcore/JavaScriptCore/config.h:26,
from ../3rdparty/javascriptcore/JavaScriptCore/pcre/pcre_compile.cpp:44:
../3rdparty/javascriptcore/JavaScriptCore/wtf/Platform.h:370:6: error: #error "Not supported ARM architecture"
# error "Not supported ARM architecture"
^~~~~
The patch is based on two upstream fixes in WebKit[1][2].
See also commit
cea7aa873a.
[1]: https://github.com/WebKit/webkit/commit/
313d9fc4bdd2f020a5d0cf834c3c61982f161ebb
[2]: https://github.com/WebKit/webkit/commit/
98f0de0709786f5d9b09dfd5908266990eb909d6
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gaël PORTAY [Tue, 12 Jun 2018 12:32:06 +0000 (08:32 -0400)]
qt5sensors: install examples to target
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `sensors' from the staging directory
to the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gaël PORTAY [Tue, 12 Jun 2018 12:32:05 +0000 (08:32 -0400)]
qt5serialport: install examples to target
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `serialport' from the staging directory
to the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gaël PORTAY [Tue, 12 Jun 2018 12:32:04 +0000 (08:32 -0400)]
qt5serialbus: install examples to target
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `serialbus' from the staging directory
to the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gaël PORTAY [Tue, 12 Jun 2018 12:32:03 +0000 (08:32 -0400)]
qt5svg: install examples to target
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `svg' from the staging directory to
the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gaël PORTAY [Tue, 12 Jun 2018 12:32:02 +0000 (08:32 -0400)]
qt5wayland: install examples to target
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `wayland' from the staging directory to
the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gaël PORTAY [Tue, 12 Jun 2018 12:32:01 +0000 (08:32 -0400)]
qt5script: install examples to target
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `script' from the staging directory to
the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gaël PORTAY [Tue, 12 Jun 2018 12:32:00 +0000 (08:32 -0400)]
qt5quickcontrols: install examples to target
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `quickcontrols' from the staging
directory to the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gaël PORTAY [Tue, 12 Jun 2018 12:31:59 +0000 (08:31 -0400)]
qt5location: install examples to target
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `location' and `positioning' from the
staging directory to the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gaël PORTAY [Tue, 12 Jun 2018 12:31:58 +0000 (08:31 -0400)]
qt5canvas3d: install examples to target
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `canvas3d' from the staging directory to
the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Sat, 16 Jun 2018 22:07:00 +0000 (00:07 +0200)]
package/mediastreamer: add another optional dependency to speexdsp
Fixes
http://autobuild.buildroot.net/results/b21/
b2104c491f0898981c652043161c52ac6c43110f/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Sven Neumann [Fri, 15 Jun 2018 08:48:38 +0000 (10:48 +0200)]
gnutls: use included unistring unless libunistring is selected
Use the included copy of libunistring unless BR2_PACKAGE_LIBUNISTRING
is already selected.
The resulting gnutls library with libunistring included is about 1.2 MB
smaller than the sum of libgnutls and libunistring.
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Petr Vorel [Fri, 15 Jun 2018 21:21:25 +0000 (23:21 +0200)]
network-manager: fix package prompt name
Rename the prompt string for consistency with the package directory
name.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Martin Bark [Sat, 16 Jun 2018 22:44:08 +0000 (23:44 +0100)]
package/nodejs: security bump to version 8.11.3
Fixes the following security issues:
- (CVE-2018-7167): Fixes Denial of Service vulnerability where calling
Buffer.fill() could hang
- (CVE-2018-7161): Fixes Denial of Service vulnerability by updating the
http2 implementation to not crash under certain circumstances during
cleanup
- (CVE-2018-
1000168): Fixes Denial of Service vulnerability by upgrading
nghttp2 to 1.32.0
See https://nodejs.org/en/blog/release/v8.11.3/ for more details
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Sat, 16 Jun 2018 08:40:17 +0000 (10:40 +0200)]
package/tor: bump version to 0.3.3.7
Release notes: https://blog.torproject.org/tor-0337-released
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Sat, 16 Jun 2018 21:39:18 +0000 (23:39 +0200)]
package/mesa3d: fix musl build error
Fixes
http://autobuild.buildroot.net/results/ccd/
ccd07150e459b2b2caba6e561ecc6eae60c83ef5/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 15:46:08 +0000 (17:46 +0200)]
perl-gd: bump to version 2.68
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Sat, 16 Jun 2018 08:20:30 +0000 (10:20 +0200)]
linux-headers: bump 4.{4, 9, 14, 16, 17}.x series
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Sat, 16 Jun 2018 08:20:29 +0000 (10:20 +0200)]
linux: bump default to version 4.17.2
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Sat, 16 Jun 2018 08:41:49 +0000 (10:41 +0200)]
package/{mesa3d, mesa3d-headers}: bump version to 18.1.2
Removed patch 0003, applied upstream:
https://cgit.freedesktop.org/mesa/mesa/commit/?h=18.1&id=
f9500edb96b7b50a6ab29ebf694610f0112d741f
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:54 +0000 (10:16 +0200)]
perl-xml-sax-base: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:53 +0000 (10:16 +0200)]
perl-xml-namespacesupport: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:52 +0000 (10:16 +0200)]
perl-xml-libxml: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:51 +0000 (10:16 +0200)]
perl-www-robotrules: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:50 +0000 (10:16 +0200)]
perl-try-tiny: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:49 +0000 (10:16 +0200)]
perl-timedate: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:48 +0000 (10:16 +0200)]
perl-path-tiny: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:47 +0000 (10:16 +0200)]
perl-netaddr-ip: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:46 +0000 (10:16 +0200)]
perl-module-build: add license file
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:45 +0000 (10:16 +0200)]
perl-mime-base64: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:44 +0000 (10:16 +0200)]
perl-lwp-mediatypes: add licence hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:43 +0000 (10:16 +0200)]
perl-json-tiny: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:42 +0000 (10:16 +0200)]
perl-io-html: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:41 +0000 (10:16 +0200)]
perl-http-negotiate: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:40 +0000 (10:16 +0200)]
perl-http-date: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:39 +0000 (10:16 +0200)]
perl-http-daemon: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:38 +0000 (10:16 +0200)]
perl-http-cookies: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:37 +0000 (10:16 +0200)]
perl-html-tagset: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:36 +0000 (10:16 +0200)]
perl-html-parser: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:35 +0000 (10:16 +0200)]
perl-gdtextutil: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:34 +0000 (10:16 +0200)]
perl-gdgraph: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:33 +0000 (10:16 +0200)]
perl-file-util: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:32 +0000 (10:16 +0200)]
perl-file-listing: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:31 +0000 (10:16 +0200)]
perl-encode-locale: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:30 +0000 (10:16 +0200)]
perl-encode-detect: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:29 +0000 (10:16 +0200)]
perl-digest-sha1: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:28 +0000 (10:16 +0200)]
perl-digest-hmac: add license hash
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:27 +0000 (10:16 +0200)]
perl-xml-sax: bump to version 1.00
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:26 +0000 (10:16 +0200)]
perl-time-hires: bump to version 1.9758
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:25 +0000 (10:16 +0200)]
perl-net-ssleay: bump to version 1.85
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:24 +0000 (10:16 +0200)]
perl-mojolicious: bump to version 7.84
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:23 +0000 (10:16 +0200)]
perl-io-socket: bump to version 2.056
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:22 +0000 (10:16 +0200)]
perl-http-message: bump to version 6.18
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad [Sat, 16 Jun 2018 08:16:21 +0000 (10:16 +0200)]
perl-datetime-tiny: bump to version 1.07
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Wed, 13 Jun 2018 16:28:26 +0000 (18:28 +0200)]
package/mediastreamer: add optional dependency to speexdsp
Fixes
http://autobuild.buildroot.net/results/594/
594ea96cd7b6726052268a3c0b094e00e7b8f12f/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Wed, 13 Jun 2018 16:28:25 +0000 (18:28 +0200)]
package/linphone: needs speexdsp
Fixes
http://autobuild.buildroot.net/results/956/
956b8cffa0a35a417763ad72bb7c8e8a8b2fe6b0/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Wed, 13 Jun 2018 16:28:24 +0000 (18:28 +0200)]
package/asterisk: add optional dependency to speexdsp
Fixes
http://autobuild.buildroot.net/results/9f6/
9f61192382ea4b57b0f0548626968752363bb13f/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Wed, 13 Jun 2018 16:28:23 +0000 (18:28 +0200)]
package/freeswitch: needs speexdsp
Fixes
http://autobuild.buildroot.net/results/a3f/
a3f9845681025fad93a4f867bb667822e87a08ea/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Wed, 13 Jun 2018 16:28:22 +0000 (18:28 +0200)]
package/speex: add optional dependency to speexdsp
Quoting speex release notes from https://www.speex.org
"Speex 1.2rc2 and SpeexDSP 1.2rc2 are out
December 6, 2014
This release splits the speex codec library and the speex DSP library
into separate source trees."
After bumping speex to 1.2.0 DSP support is provided by speexdsp.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Wed, 13 Jun 2018 16:28:21 +0000 (18:28 +0200)]
package/speexdsp: new package
Quoting speex release notes from https://www.speex.org
"Speex 1.2rc2 and SpeexDSP 1.2rc2 are out
December 6, 2014
This release splits the speex codec library and the speex DSP library
into separate source trees."
After bumping speex to 1.2.0 this new package is necessary to provide
speex-based DSP support for packages like Freeswitch and Asterisk.
We use current git HEAD which received 21 commits since the 1.2rc3
tarball was released in 2015, including a fix for building on arm.
We still need another patch which was not committed to git master to
fix building on aarch64.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Korsgaard [Fri, 15 Jun 2018 12:54:55 +0000 (14:54 +0200)]
package: add python-validators
Simple data validation library.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
projects / buildroot.git / log