Prevent an illegal memory access in gprof by ensuring that string tables for aout format files are always zero-terminated.

PR 23056
* aoutx.h (aout_get_external_symbols): Allocate an extra byte at
the end of the string table, and zero it.

Silence gcc-8 warnings

All of these warnings were false positives.  -Wstringop-truncation is
particularly annoying when it warns about strncpy used quite correctly.

bfd/
* elf-linux-core.h (swap_linux_prpsinfo32_ugid32_out): Disable
gcc-8 string truncation warning.
(swap_linux_prpsinfo32_ugid16_out): Likewise.
(swap_linux_prpsinfo64_ugid32_out): Likewise.
(swap_linux_prpsinfo64_ugid16_out): Likewise.
* elf.c (elfcore_write_prpsinfo): Likewise.
gas/
* stabs.c (generate_asm_file): Use memcpy rather than strncpy.
Remove call to strlen inside loop.
* config/tc-cr16.c (getreg_image): Warning fix.
* config/tc-crx.c (getreg_image): Warning fix.

Automatic date update in version.in

Fixed test case to compile & run on FreeBSD

Problems:
1. linking -dl lib on FreeBSD platform
2. backtrace from ld-elf shows r_debug_state() instead of _dl_debug_state()

Cause:
1. There is no dl library on FreeBSD platform test has to ignore linking "-ldl"
2. The stop due to a shared library event shows backtrace frame #0
   function as r_debug_state()

gdb/ChangeLog:

PR gdb/23095
* gdb/testsuite/gdb.base/break-probes.exp: Pass shlib_load to
prepare_for_testing.  Set normal_bp to r_debug_state if target
is bsd.

Automatic date update in version.in

FreeBSD: Fix 'Couldn't get registers: Device busy' error (PR gdb/23077)

As Rajendra SY reported at
<https://sourceware.org/ml/gdb-patches/2018-04/msg00399.html>, several
attach-related tests are failing on FreeBSD.  The "attach" command
errors with "Couldn't get registers: Device busy".

When the "attach" command is executed, it calls target_attach ->
inf_ptrace_attach, which just does the ptrace(PT_ATTACH), it does not
wait for the child to stop with SIGSTOP.  Afterwards, the command is
complete and we go back to the event loop.  The event loop wakes up
and we end up in target_wait -> fbsd_wait, and handle the SIGSTOP
stop.

At the end of execute_command, though, before going back to the event
loop, we check if the frame language changed via
check_frame_language_change().  That reads the current PC, which is
what leads to the registers read that fails.

The problem is that we fail to mark the attached-to thread as
executing between the initial attach, and the subsequent target_wait.
Until we see the thread stop with SIGSTOP, we shouldn't try to read
registers off of it.  I guess there may a timing issue here - if
you're "lucky", the thread may stop before gdb reads its registers,
masking the problem.

With that fixed, check_frame_language_change() becomes a nop until the
thread is marked not-executing again, after target_wait is called and
we go through handle_inferior_event -> normal_stop.

We haven't seen the problem on Linux because there, the target_attach
implementation waits for the thread to stop before returning.  Still,
that's supposedly hidden from the core, since the Linux target, like
most targets, is a '!to_attach_no_wait' target.

This fixes:
 FAIL: gdb.base/attach.exp: attach1, after setting file
 FAIL: gdb.base/attach.exp: attach2, with no file
 FAIL: gdb.base/attach.exp: load file manually, after attach2 (re-read) (got interactive prompt)
 FAIL: gdb.base/attach.exp: attach when process' a.out not in cwd

 FAIL: gdb.base/dprintf-detach.exp: bai=on ds=gdb dd=on: re-attach to inferior
 FAIL: gdb.base/dprintf-detach.exp: bai=on ds=gdb dd=off: re-attach to inferior
 FAIL: gdb.base/dprintf-detach.exp: bai=on ds=call dd=on: re-attach to inferior
 FAIL: gdb.base/dprintf-detach.exp: bai=on ds=call dd=off: re-attach to inferior
 FAIL: gdb.base/dprintf-detach.exp: bai=on ds=agent dd=on: re-attach to inferior
 FAIL: gdb.base/dprintf-detach.exp: bai=on ds=agent dd=off: re-attach to inferior
 FAIL: gdb.base/dprintf-detach.exp: bai=off ds=gdb dd=on: re-attach to inferior
 FAIL: gdb.base/dprintf-detach.exp: bai=off ds=gdb dd=off: re-attach to inferior
 FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=on: re-attach to inferior
 FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=off: re-attach to inferior
 FAIL: gdb.base/dprintf-detach.exp: bai=off ds=agent dd=on: re-attach to inferior
 FAIL: gdb.base/dprintf-detach.exp: bai=off ds=agent dd=off: re-attach to inferior

gdb/ChangeLog:
2018-04-21  Pedro Alves  <palves@redhat.com>
    Rajendra SY  <rajendra.sy@gmail.com>

* inf-ptrace.c (inf_ptrace_attach): Mark the thread as executing.
* remote.c (extended_remote_attach): In all-stop mode, mark the
thread as executing.

Test that gcc -B picks up new ld

gcc configured using --with-ld always uses that particular version of
ld if it exists.  This patch adds a check that the ld version reported
directly from ld-new matches that reported via gcc.  I chose to
compare the ld --version output rather than a more strict test (for
example by gcc --print-prog-name=ld), because the version test allows
a user to run the ld testsuite after installing a new ld (in the place
expected by gcc).

Sample output:

Running target unix
Using /usr/share/dejagnu/baseboards/unix.exp as board description file for target.
Using /usr/share/dejagnu/config/unix.exp as generic interface file for target.
Using /home/alan/src/binutils-gdb/ld/testsuite/config/default.exp as tool-and-target-specific interface file.
ERROR: ************************************************************************
ERROR: Your compiler driver ignores -B when choosing ld.
ERROR: You will not be testing the new ld in many of the following tests.
ERROR: It seems you will be testing /usr/bin/x86_64-w64-mingw32-ld instead.
ERROR: ************************************************************************
WARNING: Assuming target board is the local machine (which is probably wrong).
You may need to set your DEJAGNU environment variable.
Running /home/alan/src/binutils-gdb/ld/testsuite/ld-aarch64/aarch64-elf.exp ...

* testsuite/lib/ld-lib.exp (run_host_cmd): Check that gcc -B
works.

Automatic date update in version.in

RISC-V: Add new option -mrelax/-mno-relax.

gas/
* config/tc-riscv.c (options): Add OPTION_RELAX and
OPTION_NO_RELAX.
(md_longopts): New option -mrelax and -mno-relax.
(md_parse_option): Handle -mrelax and -mno-relax.
* doc/c-riscv.texi: Document for -mrelax and -mno-relax.
* testsuite/gas/riscv/no-relax-reloc.d: New.
* testsuite/gas/riscv/no-relax-reloc.s: New.
* testsuite/gas/riscv/relax-reloc.d: New.
* testsuite/gas/riscv/relax-reloc.s: New.

Improve on-line help for thread_apply_command and thread_apply_all_command.

Add a Usage: line for thread_apply_command, in particular to mention
the thread ID list.

In thread_apply_command and thread_apply_all_command help, use
uppercase for arg names, as this style seems to be more standard.

2018-04-20  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

* thread.c (_initialize_thread): improve on-line help for
thread_apply_command and thread_apply_all_command.

PR22978, TLS local-dynamic incorrectly linked on hppa-linux

We were emitting dynamic relocs on the second word of a TLS GD GOT
entry pair (the dtprel offset), without the addend necessary when no
symbol is present on the dynamic reloc.  Unfortunately the simple
solution of providing the proper addend doesn't work due to an hppa
glibc ld.so bug that ignores such addends.  So instead optimize the
relocs.  The dtprel offset is known at link time for locally defined
symbols (the only case where we'll end up with no symbol on a dynamic
reloc) so we can omit the dynamic reloc in that case.

Furthermore, we can omit a dynamic reloc on the first word of a TLS GD
GOT entry pair (the module id) if the symbol is local and we are
producing an executable.  Similarly, a tprel reloc on a TLS IE GOT
entry is not needed for local symbols in an executable.  So the
condition for TLS GOT relocs can become bfd_link_dll(info) rather than
bfd_link_pic(info) as needed for normal GOT relocs.

This all presumes hppa ld.so doesn't need to differentiate TLS GD GOT
pairs from TLS LD GOT pairs, which is currently true.

PR 22978
* elf32-hppa.c (got_relocs_needed): Add extra param to special
case both dtprel and tprel relocs.
(allocate_dynrelocs): Adjust conditions for got relocs.
(elf32_hppa_relocate_section): Likewise for local sym got relocs.
Emit dynamic relocs on TLS GOT entries for shared libraries,
not when pic.  Omit dynamic reloc on dtprel entry when local,
and on tprel entry when local and executable.

Updated Spanish translation for gas sub-directory

Add test case for a known hang in infrun

The hang occurs when GDB tries to call inferior functions on two
different threads with scheduler-locking turned on. The first call works
fine, with the call to infrun_async(1) causing the signal_handler to be
marked and the event to be handled, but then the event loop resets the
"ready" member to zero, while leaving infrun_is_async set to 1. As a
result, GDB hangs if the user switches to another thread and calls a
second function because calling infrun_async(1) a second time has no
effect, meaning the inferior call events are never handled.

The added test case provokes the above issue.

gdb/testsuite/ChangeLog:

* gdb.threads/multiple-successive-infcall.c: New test.
* gdb.threads/multiple-successive-infcall.exp: New file.

Automatic date update in version.in

[OB PATCH] Fix some comments in thread.c

Fix some typos.
Remove obsolete comment about dispatch to thread_apply_command,
rather tell that thread_command either switches to a thread,
or prints the current thread.

2018-04-19  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

* thread.c (thread_apply_all_command): Fix comment.
(thread_command): Fix comment.

Fix dependency tracking in gdbserver subdirectories

The dependency tracking (the thing that knows which source file included
which other source file during last build to know what to rebuild when
an included file changes) is broken for gdbserver subdirectories (arch
and common).

The dependency tracking files are created in the form

  arch/.deps/i386.Po

but we try to include

  .deps/arch/i386.Po

An easy smoke test is too "touch" the gdb/features/i386/32bit-core.c
file in the source directory and try to rebuild gdbserver.  This file is
included by gdb/arch/i386.c, so it should cause
gdb/gdbserver/arch/i386.o in the build directory to be rebuilt.  It
currently isn't rebuilt, but is with this patch applied.

This patch copies the technique used in GDB to transform the dep file
paths to the proper form.

Also, while testing using the depcomp method of dependency tracking (by
just hacking the condition), I noticed that depcomp was not found.  The
path to depcomp seems to be missing a "..".

gdb/gdbserver/ChangeLog:

* Makefile.in (depcomp): Add "..".
(all_deps_files): New and use it.

Fix second bug where --icf=safe triggers segfault when linking ARM.

When checking a R_ARM_TARGET[12] relocation, we need a valid target
pointer, but the garbage collection code was passing a NULL instead.
The previous fix for this bug fixed the call to
scan.global_reloc_may_be_function_pointer, but missed the similar
call to scan.local_reloc_may_be_function_pointer.

gold/
PR gold/23046
* gc.h (gc_process_relocs): Pass target to
scan.local_reloc_may_be_function_pointer.

PR22537, Segmentation fault with static PIE

The only stub type that makes sense for undefined symbols, or those
defined in shared libraries, is a plt call stub.  This patch arranges
to have "destination" set to -1 on such symbols, making for an easy
test in hppa_type_of_stub.

PR 22537
* elf32-hppa.c (elf32_hppa_size_stubs): Init "destination" to -1.
(hppa_type_of_stub): Don't return a long branch stub for
symbols other than those defined statically.

Reinstate mips ecoff support

* Makefile.am: Revert 2018-04-18 coff-mips changes.
* config.bfd: Add back mips_ecoff_le_vec and mips_ecoff_be_vec
to selvecs for mips targets change 2018-04-18.
* configure.ac: Reinstate mips_ecoff_le_vec, mips_ecoff_be_vec
and  mips_ecoff_bele_vec.
* targets.c: Likewise.
* coff-mips.c: Resurrect.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.

Automatic date update in version.in

Remove xml files from gdbserver

For ports which use new target descriptions, remove
the xml files from being built into gdbserver.

gdbserver/
* configure.srv (aarch64*-*-linux*): Don't include xml.
(i[34567]86-*-cygwin*): Likewise.
(i[34567]86-*-linux*): Likewise.
(i[34567]86-*-lynxos*): Likewise.
(i[34567]86-*-mingw32ce*): Likewise.
(i[34567]86-*-mingw*): Likewise.
(i[34567]86-*-nto*): Likewise.
(tic6x-*-uclinux): Likewise.
(x86_64-*-linux*): Likewise.
(x86_64-*-mingw*): Likewise.
(x86_64-*-cygwin*): Likewise.

Remove xml file references from target descriptions

gdb/
* common/tdesc.h (tdesc_create_feature): Remove xml filename
parameter.
* features/aarch64-core.c (create_feature_aarch64_core):
Regenerate.
* features/aarch64-fpu.c (create_feature_aarch64_fpu):
Likewise.
* features/i386/32bit-avx.c (create_feature_i386_32bit_avx):
Likewise.
* features/i386/32bit-avx512.c
(create_feature_i386_32bit_avx512): Likewise.
* features/i386/32bit-core.c (create_feature_i386_32bit_core):
Likewise.
* features/i386/32bit-linux.c (create_feature_i386_32bit_linux):
Likewise.
* features/i386/32bit-mpx.c (create_feature_i386_32bit_mpx):
Likewise.
* features/i386/32bit-pkeys.c (create_feature_i386_32bit_pkeys):
Likewise.
* features/i386/32bit-sse.c (create_feature_i386_32bit_sse):
Likewise.
* features/i386/64bit-avx.c (create_feature_i386_64bit_avx):
Likewise.
* features/i386/64bit-avx512.c
(create_feature_i386_64bit_avx512): Likewise.
* features/i386/64bit-core.c (create_feature_i386_64bit_core):
Likewise.
* features/i386/64bit-linux.c (create_feature_i386_64bit_linux):
Likewise.
* features/i386/64bit-mpx.c (create_feature_i386_64bit_mpx):
Likewise.
* features/i386/64bit-pkeys.c (create_feature_i386_64bit_pkeys):
Likewise.
* features/i386/64bit-segments.c
(create_feature_i386_64bit_segments): Likewise.
* features/i386/64bit-sse.c (create_feature_i386_64bit_sse):
Likewise.
* features/i386/x32-core.c
(create_feature_i386_x32_core): Likewise.
* features/tic6x-c6xp.c (create_feature_tic6x_c6xp): Likewise.
* features/tic6x-core.c (create_feature_tic6x_core): Likewise.
* features/tic6x-gp.c (create_feature_tic6x_gp): Likewise.
* target-descriptions.c: In generated code, don't pass xml
filename.

gdbserver/
* tdesc.c: Remove xml parameter.

Create xml from target descriptions

Add a print_xml_feature visitor class which turns a
target description into xml. Both gdb and gdbserver can do this.

gdb/
* common/tdesc.c (print_xml_feature::visit_pre): Add xml parsing.
(print_xml_feature::visit_post): Likewise.
(print_xml_feature::visit): Likewise.
* common/tdesc.h (tdesc_get_features_xml): Use const tdesc.
(print_xml_feature): Add new class.
* regformats/regdat.sh: Null xmltarget on feature targets.
* target-descriptions.c (struct target_desc): Add xmltarget.
(maintenance_check_tdesc_xml_convert): Add unittest function.
(tdesc_get_features_xml): Add function to get xml.
(maintenance_check_xml_descriptions): Test xml generation.
* xml-tdesc.c (string_read_description_xml): Add function.
* xml-tdesc.h (string_read_description_xml): Add declaration.

gdbserver/
* gdb/gdbserver/server.c (get_features_xml): Remove cast.
* tdesc.c (void target_desc::accept): Fill in function.
(tdesc_get_features_xml): Remove old xml creation.
(print_xml_feature::visit_pre): Add xml vistor.
* tdesc.h (struct target_desc): Make xmltarget mutable.
(tdesc_get_features_xml): Remove declaration.

Add feature reference in .dat files

For all targets which use the newer style target descriptions, add a
"feature" marker in the dat files.
Update regdat.sh to parse feature, but do not use it (yet).

gdb/
* features/Makefile: Add feature marker to targets with new style
target descriptions.
* regformats/aarch64.dat: Regenerate.
* regformats/i386/amd64-avx-avx512-linux.dat: Likewise.
* regformats/i386/amd64-avx-linux.dat: Likewise.
* regformats/i386/amd64-avx-mpx-avx512-pku-linux.dat: Likewise.
* regformats/i386/amd64-avx-mpx-linux.dat: Likewise.
* regformats/i386/amd64-linux.dat: Likewise.
* regformats/i386/amd64-mpx-linux.dat: Likewise.
* regformats/i386/amd64.dat: Likewise.
* regformats/i386/i386-avx-avx512-linux.dat: Likewise.
* regformats/i386/i386-avx-linux.dat: Likewise.
* regformats/i386/i386-avx-mpx-avx512-pku-linux.dat: Likewise.
* regformats/i386/i386-avx-mpx-linux.dat: Likewise.
* regformats/i386/i386-linux.dat: Likewise.
* regformats/i386/i386-mmx-linux.dat: Likewise.
* regformats/i386/i386-mpx-linux.dat: Likewise.
* regformats/i386/i386.dat: Likewise.
* regformats/i386/x32-avx-avx512-linux.dat: Likewise.
* regformats/i386/x32-avx-linux.dat: Likewise.
* regformats/i386/x32-linux.dat: Likewise.
* regformats/tic6x-c62x-linux.dat: Likewise.
* regformats/tic6x-c64x-linux.dat: Likewise.
* regformats/tic6x-c64xp-linux.dat: Likewise.
* regformats/regdat.sh: Parse feature marker.

Add tdesc osabi and architecture functions

gdb/
* common/tdesc.h (tdesc_architecture_name): Add new declaration.
(tdesc_osabi_name): Likewise.
* target-descriptions.c (tdesc_architecture_name): Add new function.
(tdesc_osabi_name): Likewise.

gdbserver/
* tdesc.c (tdesc_architecture_name): Add new function.
(tdesc_osabi_name): Likewise.
(tdesc_get_features_xml): Use new functions.

Commonise tdesc types and makes use of them in gdbserver tdesc

gdb/
* common/tdesc.c (tdesc_predefined_type): Move to here.
(tdesc_named_type): Likewise.
(tdesc_create_vector): Likewise.
(tdesc_create_struct): Likewise.
(tdesc_set_struct_size): Likewise.
(tdesc_create_union): Likewise.
(tdesc_create_flags): Likewise.
(tdesc_create_enum): Likewise.
(tdesc_add_field): Likewise.
(tdesc_add_typed_bitfield): Likewise.
(tdesc_add_bitfield): Likewise.
(tdesc_add_flag): Likewise.
(tdesc_add_enum_value): Likewise.
* common/tdesc.h (struct tdesc_type_builtin): Likewise.
(struct tdesc_type_vector): Likewise.
(struct tdesc_type_field): Likewise.
(struct tdesc_type_with_fields): Likewise.
(tdesc_create_enum): Add declaration.
(tdesc_add_typed_bitfield): Likewise.
(tdesc_add_enum_value): Likewise.
* target-descriptions.c (tdesc_type_field): Move from here.
(tdesc_type_builtin): Likewise.
(tdesc_type_vector): Likewise.
(tdesc_type_with_fields): Likewise.
(tdesc_predefined_types): Likewise.
(tdesc_named_type): Likewise.
(tdesc_create_vector): Likewise.
(tdesc_create_struct): Likewise.
(tdesc_set_struct_size): Likewise.
(tdesc_create_union): Likewise.
(tdesc_create_flags): Likewise.
(tdesc_create_enum): Likewise.
(tdesc_add_field): Likewise.
(tdesc_add_typed_bitfield): Likewise.
(tdesc_add_bitfield): Likewise.
(tdesc_add_flag): Likewise.
(tdesc_add_enum_value): Likewise.
* gdb/target-descriptions.h (tdesc_create_enum): Likewise.
(tdesc_add_typed_bitfield): Likewise.
(tdesc_add_enum_value): Likewise.

gdbserver/
* tdesc.c (tdesc_create_flags): Remove.
(tdesc_add_flag): Likewise.
(tdesc_named_type): Likewise.
(tdesc_create_union): Likewise.
(tdesc_create_struct): Likewise.
(tdesc_create_vector): Likewise.
(tdesc_add_bitfield): Likewise.
(tdesc_add_field): Likewise.
(tdesc_set_struct_size): Likewise.

Commonise tdesc_feature and makes use of it in gdbserver tdesc

gdb/
* common/tdesc.c (tdesc_feature::accept): Move to here.
(tdesc_feature::operator==): Likewise.
(tdesc_create_reg): Likewise.
* common/tdesc.h (tdesc_type_kind): Likewise.
(struct tdesc_type): Likewise.
(struct tdesc_feature): Likewise.
* regformats/regdat.sh: Create a feature.
* target-descriptions.c (tdesc_type_kind): Move from here.
(tdesc_type): Likewise.
(tdesc_type_up): Likewise.
(tdesc_feature): Likewise.
(tdesc_create_reg): Likewise.

gdbserver/
* tdesc.c (~target_desc): Remove implictly deleted items.
(init_target_desc): Iterate all features.
(tdesc_get_features_xml): Use vector.
(tdesc_create_feature): Create feature.
* tdesc.h (tdesc_feature) Remove
(target_desc): Add features.

Commonise tdesc_reg and makes use of it in gdbserver tdesc

gdb/
* Makefile.in: Add arch/tdesc.c
* common/tdesc.c: New file.
* common/tdesc.h (tdesc_element_visitor): Move to here.
(tdesc_element): Likewise.
(tdesc_reg): Likewise.
(tdesc_reg_up): Likewise.
* regformats/regdef.h (reg): Add offset to constructors.
* target-descriptions.c (tdesc_element_visitor): Move from here.
(tdesc_element): Likewise.
(tdesc_reg): Likewise.
(tdesc_reg_up): Likewise.

gdbserver/
* Makefile.in: Add common/tdesc.c
* tdesc.c (init_target_desc): init all reg_defs from register vector.
(tdesc_create_reg): Create tdesc_reg.
* tdesc.h (tdesc_feature): Add register vector.

Prevent an assertion failure in readelf & objdump when parsing corrupt DWARF information.

PR 23062
* dwarf.c (read_and_display_attr_value): Replace assertions with
test and warning message.

Updated Spanish translation for gprof directory

Updated Spanish translations for the gold and gprof sub-directories

Remove mips aout, coff, and pe support

include/coff/mips.h needs to stay for ecoff debug support.

include/
* coff/mipspe.h: Delete.
bfd/
* Makefile.am: Remove mips aout, coff, and pe support.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* coff-mips.c: Delete
* mipsbsd.c: Delete
* pe-mips.c: Delete
* pei-mips.c: Delete
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.

x86: Don't define elf32_bed/elf64_bed variables

Define elf32_bed and elf64_bed before including "elf32-target.h" and
"elf64-target.h" to avoid local elf32_bed and elf64_bed variables.

* elf32-i386.c (elf32_bed): Define before including
"elf32-target.h".
* elf64-x86-64.c (elf64_bed): Define before including
"elf64-target.h".
(elf32_bed): Define before including "elf32-target.h".

elf32_bed/elf64_bed

x86: Use a normal input file with compatible relocation

Use a normal input file with compatible relocation to hold linker
created sections,

PR ld/23055
* elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Use a
normal input file with compatible relocation.

various i386-aout and i386-coff target removal

Also tidies some other aout leftovers in binutils-common.exp.

bfd/
* Makefile.am: Remove support for assorted i386 aout and coff targets.
* config.bfd: Likewise.
* configure.ac: Likewise.
* doc/bfdint.texi: Likewise.
* targets.c: Likewise.
* freebsd.h: Delete.
* i386dynix.c: Delete.
* i386freebsd.c: Delete.
* i386linux.c: Delete.
* i386mach3.c: Delete.
* i386netbsd.c: Delete.
* i386os9k.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* testsuite/lib/binutils-common.exp: Remove support for assorted
aout targets.
gas/
* Makefile.am: Remove support for assorted i386 aout and coff targets.
* config/obj-elf.c: Likewise.
* config/tc-i386.h: Likewise.
* configure.ac: Likewise.
* configure.tgt: Likewise.
* config/te-dynix.h: Delete.
* config/te-i386aix.h: Delete.
* config/te-mach.h: Delete.
* Makefile.in: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
include/
* aout/dynix3.h: Delete.
ld/
* Makefile.am: Remove support for assorted i386 aout and coff targets.
* configure.tgt: Likewise.
* testsuite/ld-discard/discard.exp: Likewise.
* testsuite/ld-elf/binutils.exp: Likewise.
* testsuite/ld-elf/tls.exp: Likewise.
* testsuite/ld-elf/tls_common.exp: Likewise.
* testsuite/ld-elfvers/vers.exp: Likewise.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
* testsuite/ld-elfweak/elfweak.exp: Likewise.
* testsuite/ld-gc/abi-note.d: Likewise.
* testsuite/ld-gc/pr19167.d: Likewise.
* testsuite/ld-gc/pr20022.d: Likewise.
* testsuite/ld-gc/start.d: Likewise.
* testsuite/ld-gc/stop.d: Likewise.
* testsuite/ld-i386/i386.exp: Likewise.
* testsuite/ld-ifunc/binutils.exp: Likewise.
* testsuite/ld-ifunc/ifunc.exp: Likewise.
* testsuite/ld-linkonce/linkonce.exp: Likewise.
* testsuite/ld-plugin/lto.exp: Likewise.
* testsuite/ld-scripts/empty-address-2a.d: Likewise.
* testsuite/ld-scripts/empty-address-2b.d: Likewise.
* testsuite/ld-scripts/phdrs2.exp: Likewise.
* testsuite/ld-scripts/section-match-1.d: Likewise.
* testsuite/ld-shared/shared.exp: Likewise.
* testsuite/ld-size/size.exp: Likewise.
* testsuite/ld-sparc/sparc.exp: Likewise.
* emulparams/i386coff.sh: Delete.
* emulparams/i386linux.sh: Delete.
* emulparams/i386mach.sh: Delete.
* emulparams/i386nbsd.sh: Delete.
* emulparams/vsta.sh: Delete.
* scripttempl/i386coff.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.

Tidy gas/configure.tgt

Should have been removed with m68k bsd support.

* configure.tgt: Remove *-*-bsd* entry.

Correct ChangeLog dates for git commit 3f0a5f17d7f

Automatic date update in version.in

[MicroBlaze] PIC data text relative

Andrew Sadek <andrew.sadek.se@gmail.com>

A new implemented feature in GCC Microblaze that allows Position
Independent Code to run using Data Text Relative addressing instead
of using Global Offset Table.

Its aim was to make 'PIC' more efficient and flexible as elf size
excess performance overhead were noticed when using GOT due to the
indirect addressing.

include/ChangeLog:
* bfdlink.h (Add flag): Add new flag @ 'bfd_link_info' struct.
* elf/microblaze.h (Add 3 new relocations):
R_MICROBLAZE_TEXTPCREL_64, R_MICROBLAZE_TEXTREL_64
and R_MICROBLAZE_TEXTREL_32_LO for relax function.
bfd/ChangeLog:
* bfd/reloc.c (2 new BFD relocations):
BFD_RELOC_MICROBLAZE_64_TEXTPCREL &
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
* bfd/bfd-in2.h: Regenerate
* bfd/libbfd.h: Regenerate
* bfd/elf32-microblaze.c (Handle new relocs): define 'HOWTO' of 3
new relocs and handle them in both relocate and relax functions.
(microblaze_elf_reloc_type_lookup): add mapping between for new
bfd relocs.
(microblaze_elf_relocate_section): Handle new relocs in case of
elf relocation.
(microblaze_elf_relax_section): Handle new relocs for elf relaxation.
gas/ChangeLog:
* gas/config/tc-microblaze.c (Handle new relocs directives in
assembler): Handle new relocs from compiler output.
(imm_types): add new imm types for data text relative addressing
TEXT_OFFSET, TEXT_PC_OFFSET
(md_convert_frag): conversion for BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(md_apply_fix): apply fix for BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(md_estimate_size_before_relax): estimate size for
BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(tc_gen_reloc): generate relocations for
BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
ld/ChangeLog:
* ld/lexsup.c (Add 2 ld options):
(ld_options): add disable-multiple-abs-defs @ 'ld_options' array
(parse_args): parse new option and pass flag to 'link_info' struct.
* ld/ldlex.h (Add enum): add new enum @ 'option_values' enum.
* ld/ld.texinfo (Add new option): Add description for
'disable-multiple-abs-defs'
* ld/main.c: Initialize flags with false @ 'main'. Handle
disable-multiple-abs-defs @ 'mutiple_definition'.

Conditionally drop the discriminant field in quirk_rust_enum

While debugging the crash that Jan reported, I noticed that in some
situations we could end up with a situation where one branch of a Rust
enum type ended up with a field count of -1.

The fix is simple: only conditionally drop the discriminant field when
rewriting the enum variants.

I couldn't find a way to test this; I only noticed it while debugging
the DWARF reader.

2018-04-17  Tom Tromey  <tom@tromey.com>

* dwarf2read.c (quirk_rust_enum): Conditionally drop the
discriminant field.

Fix crash in quirk_rust_enum

I noticed that quirk_rust_enum can crash when presented with a union
whose fields are all scalar types.

This patch adds a new test case and fixes the bug.

Regression tested on Fedora 26 x86-64.

2018-04-17  Tom Tromey  <tom@tromey.com>

* dwarf2read.c (quirk_rust_enum): Handle unions correctly.

2018-04-17  Tom Tromey  <tom@tromey.com>

* gdb.rust/simple.rs (Union): New type.
(main): New local "u".
* gdb.rust/simple.exp (test_one_slice): Add new test case.

Don't print symbol declaration's line number in rbreak output

This commit:

  b744723f57 -- Show line numbers in output for "info var/func/type"

adds the symbol declaration's line number to the output of certain GDB
commands.  It also (inadvertently) changes the `rbreak' command's output,
like this:

  (gdb) rbreak foo
  Breakpoint 1 at 0x40049b: file rbreak.c, line 6.
  4:      static int foo1(void);
  Breakpoint 2 at 0x4004b1: file rbreak.c, line 12.
  10:     static int foo2(void);
  (gdb)

where the function declaration is now prefixed by its source line number,
followed by a colon.  But without showing the declaration's file name, the
line number is useless and can possibly cause severe confusion.

No declaration line number was shown before.  Instead, the function
declaration started at the first column:

  (gdb) rbreak foo
  Breakpoint 1 at 0x40049b: file rbreak.c, line 6.
  static int foo1(void);
  Breakpoint 2 at 0x4004b1: file rbreak.c, line 12.
  static int foo2(void);
  (gdb)

This old behavior is restored, fixing some FAILs in fullpath-expand.exp,
realname-expand.exp, and pr10179.exp.

In order to distinguish when to print location information, the meaning of
print_symbol_info()'s parameter `last' is changed.  Now NULL means to skip
any filename or line number information.  Previously NULL meant to always
print the filename.

gdb/ChangeLog:

* symtab.c (print_symbol_info): Skip printing filename and line
number when `last' is NULL.
(symtab_symbol_info): Use empty string instead of NULL for first
invocation of print_symbol_info.
(rbreak_command): Pass NULL to `last' parameter of
print_symbol_info.

Fix illegal memory accesses trigeered when linking corrupt input files.

PR 23055
* aoutx.h (find_nearest_line): Check that the symbol name exists
and is long enough, before attempting to see if it is for a .o
file.
* hash.c (bfd_hash_hash): Add an assertion that the string is not
NULL.
* linker.c (bfd_link_hash_lookup): Fail if the table or string are
NULL.
(_bfd_generic_link_add_archive_symbols): Fail if an archive entry
has no name.

Fix typo in ChangeLog entry in previous delta.

PR 23063
* readelf.c (print_symbol): If the width is zero, return straight
away.

Remove an abort() from the readelf sources.

PR 26063
* readelf.c (print_symbol): If the width is zero, return straight
away.

Add a check for a NULL table pointer before attempting to compute a DWARF filename.

PR 23065
* dwarf2.c (concat_filename): Check for a NULL table pointer.

Resync libiberty sources with master version in GCC repository.

2018-04-13  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

PR lto/81968
* simple-object.c (handle_lto_debug_sections): Keep .comment
section.

2018-03-02  David Malcolm  <dmalcolm@redhat.com>

* cp-demangle.c: Update URL for g++ V3 ABI.

2018-01-20  Eli Zaretskii  <eliz@gnu.org>

* simple-object-xcoff.c (simple_object_xcoff_find_sections): Use
ulong_type to avoid warning about 32-bit shift.

2018-01-11  Richard Biener  <rguenther@suse.de>
Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

PR lto/81968
* simple-object-common.h (struct simple_object_functions):
Change copy_lto_debug_sections callback signature.
* simple-object-elf.c (SHN_HIRESERVE, SHT_SYMTAB_SHNDX,
SHF_INFO_LINK): Add defines.
(simple_object_elf_copy_lto_debug_sections): Instead of
leaving not to be copied sections empty unnamed SHT_NULL
remove them from the target section headers and adjust section
reference everywhere.  Handle SHN_XINDEX in the symbol table
processing properly.
* simple-object.c (handle_lto_debug_sections): Change
interface to return a modified string and handle renaming
of relocation sections.

2018-01-10  Daniel van Gerpen  <daniel@vangerpen.de>

* argv.c (expandargv): Correct check for dynamically
allocated argv.

Fix tests to avoid cldemote encoding.

gas/
* testsuite/gas/i386/nops.s: Revert back deleted lines and
change encoding to 0x0f1c /1 to map to NOP.
* testsuite/gas/i386/x86-64-nops.s: Likewise.
* testsuite/gas/i386/nops.d: Likewise.
* testsuite/gas/i386/x86-64-nops.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-nops.d: Likewis.

Fix illegal memory access when parsing corrupt DWARF information.

PR 23064
* dwarf.c (process_cu_tu_index): Test for a potential buffer
overrun before copying signature pointer.

Enable Intel CLDEMOTE instruction.

gas/
* config/tc-i386.c (cpu_arch): Add .cldemote.
* doc/c-i386.texi: Document cldemote/.cldemote.
* testsuite/gas/i386/cldemote-intel.d: New.
* testsuite/gas/i386/cldemote.d: Likewise.
* testsuite/gas/i386/cldemote.s: Likewise.
* testsuite/gas/i386/i386.exp: Run new tests.
* testsuite/gas/i386/x86-64-cldemote-intel.d: New.
* testsuite/gas/i386/x86-64-cldemote.d: Likewise.
* testsuite/gas/i386/x86-64-cldemote.s: Likewise.
* testsuite/gas/i386/ilp32/x86-64-nops.d: Remove 0x0f1c
NOP encoding that maps to cldemote.
* testsuite/gas/i386/nops.d: Likewise.
* testsuite/gas/i386/nops.s: Likewise.
* testsuite/gas/i386/x86-64-nops.d: Likewise.
* testsuite/gas/i386/x86-64-nops.s: Likewise.

opcode/
* i386-dis.c: Add REG_0F1C_MOD_0, MOD_0F1C_PREFIX_0,
PREFIX_0F1C.
* i386-gen.c (cpu_flag_init): Add CPU_CLDEMOTE_FLAGS,
(cpu_flags): Add CpuCLDEMOTE.
* i386-init.h: Regenerate.
* i386-opc.h (enum): Add CpuCLDEMOTE,
(i386_cpu_flags): Add cpucldemote.
* i386-opc.tbl: Add cldemote.
* i386-tbl.h: Regenerate.

Reinstate readelf decoding of i860, i960 and i370 relocs

include/
* elf/i370.h: Revert removal.
* elf/i860.h: Likewise.
* elf/i960.h: Likewise.
binutils
* readelf.c: Revert 2018-04-16 and 2018-04-11 changes.

Automatic date update in version.in

linux_spu_make_corefile_notes: return note_data instead of nullptr

Since commit

  9018be2 ("Make target_read_alloc & al return vectors")

the test gdb.threads/gcore-stale-thread.exp test results in UNSUPPORTED:

  UNSUPPORTED: gdb.threads/gcore-stale-thread.exp: save a corefile

The problem is that the linux_spu_make_corefile_notes started returning
nullptr when reading TARGET_OBJECT_SPU fails.  The previous (and proper)
behaviour is to return the note_data received as a parameter, so that
other functions may continue to append to this buffer.

With this patch, the test goes back to PASS.

gdb/ChangeLog:

* linux-tdep.c (linux_spu_make_corefile_notes): Return note_data
instead of nullptr.

Adjust more test cases to changed output of info var/func/type

After this commit:

  b744723f57 -- Show line numbers in output for "info var/func/type"

the test cases dbx.exp and info-fun.exp yield new FAILs because two
regular expressions have not been adjusted to the changed output yet.
This is fixed.

gdb/testsuite/ChangeLog:

* gdb.base/dbx.exp (test_whereis): Adjust regexp to added line
number information in output of "whereis" command.
* gdb.base/info-fun.exp: Likewise, for "info fun" command.

Fix illegal memory accesses in the assembler when attempting to parse corrup tinput files.

PR 23054
* cond.c (s_ifsef): Replace use of obstack_copy with obstack_alloc
followed by memcpy.
(s_if, s_ifb, s_ifc, s_ifeqs): Likewise.
* obj-elf.c (elf_adjust_symtab): Check for local symbols before
attempting to dereference the sy_next field of a symbol.
* stabs.c (get_stab_string_offset): Fail if there is no string
following the stab directive.

Remove sunos.em

Should have been removed with the m68k and sparc aout targets.

* emultempl/sunos.em: Delete.

Fix i960 machine name

* readelf.c (get_machine_name): Correct typo.

gdb: Remove support for SH-5/SH64

Since bfd dropped support for SH-5, there's no point in keeping it in
GDB either.

This restores --enable-targets=all builds.

gdb/ChangeLog:
2018-04-16  Pedro Alves  <palves@redhat.com>

* MAINTAINERS (sh): Remove.
* Makefile.in (ALL_TARGET_OBS): Remove sh64-tdep.o.
(HFILES_NO_SRCDIR): Remove sh64-tdep.h.
(ALLDEPFILES): Remove sh64-tdep.c.
* NEWS: Mentions that support for SH-5/SH64 is removed.
* configure.tgt (sh*-*-linux*): Remove reference to sh64-tdep.o.
(sh*-*-openbsd*): Ditto.
(sh64-*-elf*): Remove.
(sh*): Remove.
* regcache.c (cooked_write_test): Remove bfd_mach_sh5 case.
* sh-linux-tdep.c: Remove reference to bfd_mach_sh5.
* sh-tdep.c: No longer include "sh64-tdep.h".
(sh_gdbarch_init): Remove reference to bfd_mach_sh5.
* sh64-tdep.c, sh64-tdep.h: Remove files.

gdb: Remove OpenBSD/m88k support

Support for m88k was fully removed from bfd, which broke gdb
--enable-targets=all builds:

  > gdb/m88k-tdep.c: In function void _initialize_m88k_tdep():
  > gdb/m88k-tdep.c:867:21: error: bfd_arch_m88k was not declared in this scope
  >    gdbarch_register (bfd_arch_m88k, m88k_gdbarch_init, NULL);

There's no point in keeping GDB support for OpenBSD/m88k with no bfd
support, so this commit simply removes the port.

gdb/ChangeLog:
2018-04-16  Pedro Alves  <palves@redhat.com>

* MAINTAINERS: Remove m88k.
* Makefile.in (ALL_TARGET_OBS): Remove m88k-tdep.o.
(HFILES_NO_SRCDIR): Remove m88k-tdep.h.
(ALLDEPFILES): Remove m88k-bsd-nat.c and m88k-tdep.c.
* NEWS: Mention that support for OpenBSD/m88k was removed.
* configure.host (m88*-*-*): Remove support.
* configure.nat (m88k-*-*): Remove support.
* configure.tgt (m88*-*-openbsd*): Remove.
* m88k-bsd-nat.c, m88k-tdep.c, m88k-tdep.h: Delete.

Prevent an illegal memory access via an out of range fixup pointer.

PR 23061
* coffgen.c (coff_pointerize_aux): Check for an out of range
fixup.

Remove arm-epoc-pe support

bfd/
* Makefile.am: Remove arm-epoc-pe support.
* coff-arm.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* epoc-pe-arm.c: Delete.
* epoc-pei-arm.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* configure.ac: Remove arm-epoc-pe support.
* dlltool.c: Likewise.
* configure: Regenerate.
gas/
* Makefile.am: Remove arm-epoc-pe support.
* config/tc-arm.h: Likewise.
* configure.tgt: Likewise.
* testsuite/gas/all/gas.exp: Likewise.
* testsuite/gas/arm/local_label_coff.d: Likewise.
* testsuite/gas/arm/undefined.d: Likewise.
* testsuite/gas/arm/undefined_coff.d: Likewise.
* config/te-epoc-pe.h: Delete.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
ld/
* Makefile.am: Remove arm-epoc-pe support.
* configure.tgt: Likewise.
* emultempl/pe.em: Likewise.
* pe-dll.c: Likewise.
* testsuite/ld-scripts/fill.d: Likewise.
* testsuite/ld-scripts/fill16.d: Likewise.
* emulparams/arm_epoc_pe.sh: Delete.
* scripttempl/epocpe.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.

sparc-coff removal leftover

* coff/sparc.h: Delete.

Remove sparc-aout and sparc-coff support

bfd/
* Makefile.am: Remove sparc-aout and sparc-coff support.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* aout-sparcle.c: Delete.
* aoutf1.h: Delete.
* cf-sparclynx.c: Delete.
* coff-sparc.c: Delete.
* demo64.c: Delete.
* sparclinux.c: Delete.
* sparclynx.c: Delete.
* sparcnetbsd.c: Delete.
* sunos.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* testsuite/lib/binutils-common.exp: Remove sparc-aout and
sparc-coff support.
gas/
* Makefile.am: Remove sparc-aout and sparc-coff support.
* config/obj-coff.h: Likewise.
* config/tc-sparc.c: Likewise.
* config/tc-sparc.h: Likewise.
* configure.tgt: Likewise.
* config/te-sparcaout.h: Delete.
* testsuite/gas/sun4/addend.d: Delete.
* testsuite/gas/sun4/addend.exp: Delete.
* testsuite/gas/sun4/addend.s: Delete.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
ld/
* Makefile.am: Remove sparc-aout and sparc-coff support.
* configure.tgt: Likewise.
* testsuite/ld-elfvers/vers.exp: Likewise.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
* testsuite/ld-elfweak/elfweak.exp: Likewise.
* testsuite/ld-shared/shared.exp: Likewise.
* emulparams/coff_sparc.sh: Delete.
* emulparams/sparcaout.sh: Delete.
* emulparams/sparclinux.sh: Delete.
* emulparams/sparcnbsd.sh: Delete.
* emulparams/sun4.sh: Delete.
* scripttempl/sparccoff.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.

Remove m68k-aout and m68k-coff support

include/
* aout/host.h: Remove m68k-aout and m68k-coff support.
* aout/hp300hpux.h: Delete.
* coff/apollo.h: Delete.
* coff/aux-coff.h: Delete.
* coff/m68k.h: Delete.
bfd/
* Makefile.am: Remove m68k-aout and m68k-coff support.
* aoutf1.h: Likewise.
* aoutx.h: Likewise.
* archive.c: Likewise.
* bfd-in.h: Likewise.
* bfd.c: Likewise.
* coffcode.h: Likewise.
* coffswap.h: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* configure.host: Likewise.
* doc/bfd.texinfo: Likewise.
* doc/bfdint.texi: Likewise.
* freebsd.h: Likewise.
* gen-aout.c: Likewise.
* hpux-core.c: Likewise.
* libaout.h: Likewise.
* libbfd-in.h: Likewise.
* pdp11.c: Likewise.
* peicode.h: Likewise.
* riscix.c: Likewise.
* targets.c: Likewise.
* aout0.c: Delete.
* coff-apollo.c: Delete.
* coff-aux.c: Delete.
* coff-m68k.c: Delete.
* coff-svm68k.c: Delete.
* coff-u68k.c: Delete.
* hosts/delta68.h: Delete.
* hosts/hp300bsd.h: Delete.
* hosts/m68kaux.h: Delete.
* hosts/news.h: Delete.
* hp300bsd.c: Delete.
* hp300hpux.c: Delete.
* liboasys.h: Delete.
* m68k4knetbsd.c: Delete.
* m68klinux.c: Delete.
* m68knetbsd.c: Delete.
* oasys.c: Delete.
* versados.c: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* testsuite/binutils-all/copy-2.d: Remove m68k-aout and m68k-coff
support.
* testsuite/binutils-all/copy-3.d: Likewise.
* testsuite/binutils-all/objcopy.exp: Likewise.
* testsuite/lib/binutils-common.exp: Likewise.
gas/
* Makefile.am: Remove m68k-aout and m68k-coff support.
* config/tc-m68k.c: Likewise.
* config/tc-m68k.h: Likewise.
* configure.ac: Likewise.
* configure.tgt: Likewise.
* testsuite/gas/all/weakref1u.d: Likewise.
* testsuite/gas/m68k/all.exp: Likewise.
* testsuite/gas/m68k/br-isaa.d: Likewise.
* testsuite/gas/m68k/br-isab.d: Likewise.
* testsuite/gas/m68k/br-isac.d: Likewise.
* config/te-psos.h: Delete.
* config/te-sun3.h: Delete.
* testsuite/gas/m68k-coff/gas.exp: Delete.
* testsuite/gas/m68k-coff/p2389.s: Delete.
* testsuite/gas/m68k-coff/p2389a.s: Delete.
* testsuite/gas/m68k-coff/p2430.s: Delete.
* testsuite/gas/m68k-coff/p2430a.s: Delete.
* testsuite/gas/m68k-coff/t1.s: Delete.
* testsuite/gas/m68k/p3041.d: Delete.
* testsuite/gas/m68k/p3041.s: Delete.
* testsuite/gas/m68k/p3041data.d: Delete.
* testsuite/gas/m68k/p3041data.s: Delete.
* testsuite/gas/m68k/p3041pcrel.d: Delete.
* testsuite/gas/m68k/p3041pcrel.s: Delete.
* testsuite/gas/m68k/t2.d: Delete.
* Makefile.in: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
ld/
* Makefile.am: Remove m68k-aout and m68k-coff support.
* configure.tgt: Likewise.
* emultempl/m68kelf.em: Likewise.
* ld.texinfo: Likewise.
* mri.c: Likewise.
* emulparams/delta68.sh: Delete.
* emulparams/hp300bsd.sh: Delete.
* emulparams/hp3hpux.sh: Delete.
* emulparams/m68k4knbsd.sh: Delete.
* emulparams/m68kaout.sh: Delete.
* emulparams/m68kaux.sh: Delete.
* emulparams/m68kcoff.sh: Delete.
* emulparams/m68klinux.sh: Delete.
* emulparams/m68knbsd.sh: Delete.
* emulparams/m68kpsos.sh: Delete.
* emulparams/sun3.sh: Delete.
* emultempl/m68kcoff.em: Delete.
* scripttempl/delta68.sc: Delete.
* scripttempl/m68kaux.sc: Delete.
* scripttempl/m68kcoff.sc: Delete.
* scripttempl/psos.sc: Delete.
* testsuite/ld-versados/t1-1.ro: Delete.
* testsuite/ld-versados/t1-2.ro: Delete.
* testsuite/ld-versados/t1.ld: Delete.
* testsuite/ld-versados/t1.ook: Delete.
* testsuite/ld-versados/t2-1.ro: Delete.
* testsuite/ld-versados/t2-2.ro: Delete.
* testsuite/ld-versados/t2-3.ro: Delete.
* testsuite/ld-versados/t2.ld: Delete.
* testsuite/ld-versados/t2.ook: Delete.
* testsuite/ld-versados/versados.exp: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.

Remove sh5 and sh64 support

include/
* dis-asm.h: Remove sh5 and sh64 support.
bfd/
* Makefile.am: Remove sh5 and sh64 support.
* archures.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* cpu-sh.c: Likewise.
* elf32-sh-relocs.h: Likewise.
* elf32-sh.c: Likewise.
* targets.c: Likewise.
* elf32-sh64-com.c: Delete.
* elf32-sh64.c: Delete.
* elf32-sh64.h: Delete.
* elf64-sh64.c: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
opcodes/
* Makefile.am: Remove sh5 and sh64 support.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* sh-dis.c: Likewise.
* sh64-dis.c: Delete.
* sh64-opc.c: Delete.
* sh64-opc.h: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
bintuils/
* testsuite/binutils-all/objcopy.exp: Remove sh5 and sh64 support.
gas/
* Makefile.am: Remove sh5 and sh64 support.
* config/tc-sh.c: Likewise.
* configure.tgt: Likewise.
* doc/Makefile.am: Likewise.
* doc/as.texinfo: Likewise.
* testsuite/gas/cfi/cfi.exp: Likewise.
* testsuite/gas/sh/basic.exp: Likewise.
* config/tc-sh64.c: Delete.
* config/tc-sh64.h: Delete.
* doc/c-sh64.texi: Delete.
* testsuite/gas/sh/sh64/abi-32.d: Delete.
* testsuite/gas/sh/sh64/abi-32.s: Delete.
* testsuite/gas/sh/sh64/abi-64.d: Delete.
* testsuite/gas/sh/sh64/abi-64.s: Delete.
* testsuite/gas/sh/sh64/basic-1.d: Delete.
* testsuite/gas/sh/sh64/basic-1.s: Delete.
* testsuite/gas/sh/sh64/case-1.d: Delete.
* testsuite/gas/sh/sh64/case-1.s: Delete.
* testsuite/gas/sh/sh64/case-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/crange1-1.d: Delete.
* testsuite/gas/sh/sh64/crange1-2.d: Delete.
* testsuite/gas/sh/sh64/crange1.s: Delete.
* testsuite/gas/sh/sh64/crange2-1.d: Delete.
* testsuite/gas/sh/sh64/crange2-2.d: Delete.
* testsuite/gas/sh/sh64/crange2-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/crange2.s: Delete.
* testsuite/gas/sh/sh64/crange3-1.d: Delete.
* testsuite/gas/sh/sh64/crange3.s: Delete.
* testsuite/gas/sh/sh64/crange4-1.d: Delete.
* testsuite/gas/sh/sh64/crange4.s: Delete.
* testsuite/gas/sh/sh64/crange5-1.d: Delete.
* testsuite/gas/sh/sh64/crange5.s: Delete.
* testsuite/gas/sh/sh64/creg-1.d: Delete.
* testsuite/gas/sh/sh64/creg-1.s: Delete.
* testsuite/gas/sh/sh64/creg-2.d: Delete.
* testsuite/gas/sh/sh64/creg-2.s: Delete.
* testsuite/gas/sh/sh64/datal-1.s: Delete.
* testsuite/gas/sh/sh64/datal-2.d: Delete.
* testsuite/gas/sh/sh64/datal-2.s: Delete.
* testsuite/gas/sh/sh64/datal-3.s: Delete.
* testsuite/gas/sh/sh64/datal32-1.d: Delete.
* testsuite/gas/sh/sh64/datal32-3.d: Delete.
* testsuite/gas/sh/sh64/datal64-1.d: Delete.
* testsuite/gas/sh/sh64/datal64-3.d: Delete.
* testsuite/gas/sh/sh64/eh-1.d: Delete.
* testsuite/gas/sh/sh64/eh-1.s: Delete.
* testsuite/gas/sh/sh64/endian-1.d: Delete.
* testsuite/gas/sh/sh64/endian-1.s: Delete.
* testsuite/gas/sh/sh64/endian-2.d: Delete.
* testsuite/gas/sh/sh64/endian-2.s: Delete.
* testsuite/gas/sh/sh64/err-1.s: Delete.
* testsuite/gas/sh/sh64/err-2.s: Delete.
* testsuite/gas/sh/sh64/err-3.s: Delete.
* testsuite/gas/sh/sh64/err-4.s: Delete.
* testsuite/gas/sh/sh64/err-abi-32.s: Delete.
* testsuite/gas/sh/sh64/err-abi-64.s: Delete.
* testsuite/gas/sh/sh64/err-dsp.s: Delete.
* testsuite/gas/sh/sh64/err-movi-noexp-1.s: Delete.
* testsuite/gas/sh/sh64/err-noexp-cmd1.s: Delete.
* testsuite/gas/sh/sh64/err-pt-1.s: Delete.
* testsuite/gas/sh/sh64/err-pt32-cmd1.s: Delete.
* testsuite/gas/sh/sh64/err-pt32-cmd2.s: Delete.
* testsuite/gas/sh/sh64/err-pt32-cmd3.s: Delete.
* testsuite/gas/sh/sh64/err-ptb-1.s: Delete.
* testsuite/gas/sh/sh64/err-ptb-2.s: Delete.
* testsuite/gas/sh/sh64/err.exp: Delete.
* testsuite/gas/sh/sh64/immexpr1.s: Delete.
* testsuite/gas/sh/sh64/immexpr2.s: Delete.
* testsuite/gas/sh/sh64/immexpr32-1.d: Delete.
* testsuite/gas/sh/sh64/immexpr32-2.d: Delete.
* testsuite/gas/sh/sh64/immexpr64-1.d: Delete.
* testsuite/gas/sh/sh64/immexpr64-2.d: Delete.
* testsuite/gas/sh/sh64/lineno.d: Delete.
* testsuite/gas/sh/sh64/lineno.s: Delete.
* testsuite/gas/sh/sh64/localcom-1.d: Delete.
* testsuite/gas/sh/sh64/localcom-1.s: Delete.
* testsuite/gas/sh/sh64/mix-1.d: Delete.
* testsuite/gas/sh/sh64/mix-1.s: Delete.
* testsuite/gas/sh/sh64/mix-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/movi-1.s: Delete.
* testsuite/gas/sh/sh64/movi-2.s: Delete.
* testsuite/gas/sh/sh64/movi-3.d: Delete.
* testsuite/gas/sh/sh64/movi-3.s: Delete.
* testsuite/gas/sh/sh64/movi32-1.d: Delete.
* testsuite/gas/sh/sh64/movi32-2.d: Delete.
* testsuite/gas/sh/sh64/movi32-noexp-2.d: Delete.
* testsuite/gas/sh/sh64/movi64-1.d: Delete.
* testsuite/gas/sh/sh64/movi64-2.d: Delete.
* testsuite/gas/sh/sh64/movi64-2.s: Delete.
* testsuite/gas/sh/sh64/movi64-3.d: Delete.
* testsuite/gas/sh/sh64/movi64-noexp-2.d: Delete.
* testsuite/gas/sh/sh64/pt-1.d: Delete.
* testsuite/gas/sh/sh64/pt-1.s: Delete.
* testsuite/gas/sh/sh64/pt-2.s: Delete.
* testsuite/gas/sh/sh64/pt-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/pt32-1.d: Delete.
* testsuite/gas/sh/sh64/pt32-noexp-2.d: Delete.
* testsuite/gas/sh/sh64/pt64-1.d: Delete.
* testsuite/gas/sh/sh64/pt64-32-1.d: Delete.
* testsuite/gas/sh/sh64/pt64-32-2.d: Delete.
* testsuite/gas/sh/sh64/pt64-noexp-2.d: Delete.
* testsuite/gas/sh/sh64/ptc-1.s: Delete.
* testsuite/gas/sh/sh64/ptc32-1.d: Delete.
* testsuite/gas/sh/sh64/ptc32-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/ptc64-1.d: Delete.
* testsuite/gas/sh/sh64/ptc64-32-1.d: Delete.
* testsuite/gas/sh/sh64/ptc64-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/ptext-1.s: Delete.
* testsuite/gas/sh/sh64/ptext32-1.d: Delete.
* testsuite/gas/sh/sh64/ptext32-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/ptext64-1.d: Delete.
* testsuite/gas/sh/sh64/ptext64-32-1.d: Delete.
* testsuite/gas/sh/sh64/ptext64-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/rel-1.s: Delete.
* testsuite/gas/sh/sh64/rel-2.s: Delete.
* testsuite/gas/sh/sh64/rel-3.s: Delete.
* testsuite/gas/sh/sh64/rel-4.s: Delete.
* testsuite/gas/sh/sh64/rel-5.s: Delete.
* testsuite/gas/sh/sh64/rel32-1.d: Delete.
* testsuite/gas/sh/sh64/rel32-2.d: Delete.
* testsuite/gas/sh/sh64/rel32-3.d: Delete.
* testsuite/gas/sh/sh64/rel32-4.d: Delete.
* testsuite/gas/sh/sh64/rel32-5.d: Delete.
* testsuite/gas/sh/sh64/rel64-1.d: Delete.
* testsuite/gas/sh/sh64/rel64-2.d: Delete.
* testsuite/gas/sh/sh64/rel64-3.d: Delete.
* testsuite/gas/sh/sh64/rel64-4.d: Delete.
* testsuite/gas/sh/sh64/rel64-5.d: Delete.
* testsuite/gas/sh/sh64/relax-1.d: Delete.
* testsuite/gas/sh/sh64/relax-1.s: Delete.
* testsuite/gas/sh/sh64/relax-2.d: Delete.
* testsuite/gas/sh/sh64/relax-2.s: Delete.
* testsuite/gas/sh/sh64/relax-3.d: Delete.
* testsuite/gas/sh/sh64/relax-3.s: Delete.
* testsuite/gas/sh/sh64/sh64.exp: Delete.
* testsuite/gas/sh/sh64/shift-1.s: Delete.
* testsuite/gas/sh/sh64/shift-2.s: Delete.
* testsuite/gas/sh/sh64/shift-3.s: Delete.
* testsuite/gas/sh/sh64/shift32-1.d: Delete.
* testsuite/gas/sh/sh64/shift32-3.d: Delete.
* testsuite/gas/sh/sh64/shift32-noexp-3.d: Delete.
* testsuite/gas/sh/sh64/shift64-1.d: Delete.
* testsuite/gas/sh/sh64/shift64-2.d: Delete.
* testsuite/gas/sh/sh64/shift64-3.d: Delete.
* testsuite/gas/sh/sh64/shift64-noexp-3.d: Delete.
* testsuite/gas/sh/sh64/syntax-1.d: Delete.
* testsuite/gas/sh/sh64/syntax-1.s: Delete.
* testsuite/gas/sh/sh64/syntax-2.d: Delete.
* testsuite/gas/sh/sh64/syntax-2.s: Delete.
* testsuite/gas/sh/sh64/ua-1.s: Delete.
* testsuite/gas/sh/sh64/ua32-1.d: Delete.
* testsuite/gas/sh/sh64/ua64-1.d: Delete.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
ld/
* Makefile.am: Remove sh5 and sh64 support.
* configure.tgt: Likewise.
* ldlang.c: Likewise.
* testsuite/ld-elfcomm/elfcomm.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-gc/pr13683.d: Likewise.
* testsuite/ld-scripts/crossref.exp: Likewise.
* testsuite/ld-selective/selective.exp: Likewise.
* testsuite/ld-sh/ld-r-1.d: Likewise.
* testsuite/ld-sh/rd-sh.exp: Likewise.
* testsuite/ld-sh/sh.exp: Likewise.
* testsuite/ld-srec/srec.exp: Likewise.
* testsuite/ld-undefined/undefined.exp: Likewise.
* emulparams/shelf32.sh: Delete.
* emulparams/shelf32_linux.sh: Delete.
* emulparams/shelf32_nbsd.sh: Delete.
* emulparams/shelf64.sh: Delete.
* emulparams/shelf64_nbsd.sh: Delete.
* emulparams/shlelf32.sh: Delete.
* emulparams/shlelf32_linux.sh: Delete.
* emulparams/shlelf32_nbsd.sh: Delete.
* emulparams/shlelf64.sh: Delete.
* emulparams/shlelf64_nbsd.sh: Delete.
* emultempl/sh64elf.em: Delete.
* testsuite/ld-sh/sh64/abi32.sd: Delete.
* testsuite/ld-sh/sh64/abi32.xd: Delete.
* testsuite/ld-sh/sh64/abi64.sd: Delete.
* testsuite/ld-sh/sh64/abi64.xd: Delete.
* testsuite/ld-sh/sh64/abixx-noexp.sd: Delete.
* testsuite/ld-sh/sh64/cmpct1.sd: Delete.
* testsuite/ld-sh/sh64/cmpct1.xd: Delete.
* testsuite/ld-sh/sh64/crange-1.s: Delete.
* testsuite/ld-sh/sh64/crange-2a.s: Delete.
* testsuite/ld-sh/sh64/crange-2b.s: Delete.
* testsuite/ld-sh/sh64/crange-2c.s: Delete.
* testsuite/ld-sh/sh64/crange-2d.s: Delete.
* testsuite/ld-sh/sh64/crange-2e.s: Delete.
* testsuite/ld-sh/sh64/crange-2f.s: Delete.
* testsuite/ld-sh/sh64/crange-2g.s: Delete.
* testsuite/ld-sh/sh64/crange-2h.s: Delete.
* testsuite/ld-sh/sh64/crange-2i.s: Delete.
* testsuite/ld-sh/sh64/crange1.rd: Delete.
* testsuite/ld-sh/sh64/crange2.rd: Delete.
* testsuite/ld-sh/sh64/crange3-cmpct.rd: Delete.
* testsuite/ld-sh/sh64/crange3-media.rd: Delete.
* testsuite/ld-sh/sh64/crange3.dd: Delete.
* testsuite/ld-sh/sh64/crange3.rd: Delete.
* testsuite/ld-sh/sh64/crangerel1.rd: Delete.
* testsuite/ld-sh/sh64/crangerel2.rd: Delete.
* testsuite/ld-sh/sh64/dlsection-1.s: Delete.
* testsuite/ld-sh/sh64/dlsection.sd: Delete.
* testsuite/ld-sh/sh64/endian.dbd: Delete.
* testsuite/ld-sh/sh64/endian.dld: Delete.
* testsuite/ld-sh/sh64/endian.ld: Delete.
* testsuite/ld-sh/sh64/endian.s: Delete.
* testsuite/ld-sh/sh64/endian.sbd: Delete.
* testsuite/ld-sh/sh64/endian.sld: Delete.
* testsuite/ld-sh/sh64/gotplt.d: Delete.
* testsuite/ld-sh/sh64/gotplt.map: Delete.
* testsuite/ld-sh/sh64/gotplt.s: Delete.
* testsuite/ld-sh/sh64/init-cmpct.d: Delete.
* testsuite/ld-sh/sh64/init-media.d: Delete.
* testsuite/ld-sh/sh64/init.s: Delete.
* testsuite/ld-sh/sh64/init64.d: Delete.
* testsuite/ld-sh/sh64/mix1-noexp.sd: Delete.
* testsuite/ld-sh/sh64/mix1.sd: Delete.
* testsuite/ld-sh/sh64/mix1.xd: Delete.
* testsuite/ld-sh/sh64/mix2-noexp.sd: Delete.
* testsuite/ld-sh/sh64/mix2.sd: Delete.
* testsuite/ld-sh/sh64/mix2.xd: Delete.
* testsuite/ld-sh/sh64/rd-sh64.exp: Delete.
* testsuite/ld-sh/sh64/rel-1.s: Delete.
* testsuite/ld-sh/sh64/rel-2.s: Delete.
* testsuite/ld-sh/sh64/rel32.xd: Delete.
* testsuite/ld-sh/sh64/rel64.xd: Delete.
* testsuite/ld-sh/sh64/relax.exp: Delete.
* testsuite/ld-sh/sh64/relax1.s: Delete.
* testsuite/ld-sh/sh64/relax2.s: Delete.
* testsuite/ld-sh/sh64/relax3.s: Delete.
* testsuite/ld-sh/sh64/relax4.s: Delete.
* testsuite/ld-sh/sh64/reldl-1.s: Delete.
* testsuite/ld-sh/sh64/reldl-2.s: Delete.
* testsuite/ld-sh/sh64/reldl32.rd: Delete.
* testsuite/ld-sh/sh64/reldl64.rd: Delete.
* testsuite/ld-sh/sh64/relfail.exp: Delete.
* testsuite/ld-sh/sh64/relfail.s: Delete.
* testsuite/ld-sh/sh64/sh64-1.s: Delete.
* testsuite/ld-sh/sh64/sh64-2.s: Delete.
* testsuite/ld-sh/sh64/sh64.exp: Delete.
* testsuite/ld-sh/sh64/shcmp-1.s: Delete.
* testsuite/ld-sh/sh64/shdl-1.s: Delete.
* testsuite/ld-sh/sh64/shdl-2.s: Delete.
* testsuite/ld-sh/sh64/shdl32.xd: Delete.
* testsuite/ld-sh/sh64/shdl64.sd: Delete.
* testsuite/ld-sh/sh64/shdl64.xd: Delete.
* testsuite/ld-sh/sh64/shmix-1.s: Delete.
* testsuite/ld-sh/sh64/shmix-2.s: Delete.
* testsuite/ld-sh/sh64/shmix-3.s: Delete.
* testsuite/ld-sh/sh64/stobin-0-dso.d: Delete.
* testsuite/ld-sh/sh64/stobin-1.d: Delete.
* testsuite/ld-sh/sh64/stobin.s: Delete.
* testsuite/ld-sh/sh64/stolib.s: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.

Remove sh-symbianelf support

bfd/
* Makefile.am: Remove sh-symbianelf support.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* elf32-sh-symbian.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
gas/
* config/tc-sh.c: Remove sh-symbianelf support.
* config/tc-sh.h: Likewise.
* configure.ac: Likewise.
* configure.tgt: Likewise.
* testsuite/gas/sh/reg-prefix.d: Likewise.
* testsuite/gas/sh/sh2a-pic.d: Likewise.
* config.in: Regenerate.
* configure: Regenerate.
ld/
* Makefile.am: Remove sh-symbianelf support.
* configure.tgt: Likewise.
* emulparams/shlsymbian.sh: Delete.
* scripttempl/elf32sh-symbian.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.

Remove vax-bsd and vax-ultrix support

bfd/
* Makefile.am: Remove vax-bsd and vax-ultrix support.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* vaxbsd.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
ld/
* Makefile.am: Remove vax-bsd and vax-ultrix support.
* configure.tgt: Likewise.
* emulparams/vax.sh: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.

Remove w65 support

include/
* coff/internal.h: Remove w65 support.
* coff/w65.h: Delete.
bfd/
* Makefile.am: Remove w65 support.
* archures.c: Likewise.
* coffcode.h: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* coff-w65.c: Delete.
* cpu-w65.c: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
opcodes/
* Makefile.am: Remove w65 support.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* w65-dis.c: Delete.
* w65-opc.h: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
binutils/
* testsuite/binutils-all/objcopy.exp: Remove w65 support.
ld/
* Makefile.am: Remove w65 support.
* configure.tgt: Likewise.
* emulparams/w65.sh: Delete.
* scripttempl/w65.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.

Remove we32k support

include/
* coff/we32k.h: Delete.
bfd/
* Makefile.am: Remove we32k support.
* archures.c: Likewise.
* coffcode.h: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* coff-we32k.c: Delete.
* cpu-we32k.c: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
opcodes/
* configure.ac: Remove we32k support.
* configure: Regenerate.
bintuils/
* testsuite/binutils-all/objdump.exp: Remove we32k support.

Remove m88k support

include/
* coff/internal.h: Remove m88k support.
* coff/m88k.h: Delete.
* opcode/m88k.h: Delete.
bfd/
* Makefile.am: Remove m88k support.
* aoutx.h: Likewise.
* archures.c: Likewise.
* coffcode.h: Likewise.
* coffswap.h: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* cpu-ns32k.c: Likewise.
* elf32-nds32.c: Likewise.
* mach-o.c: Likewise.
* netbsd-core.c: Likewise.
* reloc.c: Likewise.
* targets.c: Likewise.
* coff-m88k.c: Delete.
* cpu-m88k.c: Delete.
* elf32-m88k.c: Delete.
* hosts/m88kmach3.h: Delete.
* m88kmach3.c: Delete.
* m88kopenbsd.c: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
opcodes/
* Makefile.am: Remove m88k support.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* m88k-dis.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
binutils/
* MAINTAINERS (Mark Kettenis): Move to past maintainers.
* testsuite/binutils-all/objdump.exp: Remove m88k support.
gas/
* configure.ac: Remove m88k support.
* config.in: Regenerate.
* configure: Regenerate.
ld/
* Makefile.am: Remove m88k support.
* configure.host: Likewise.
* configure.tgt: Likewise.
* testsuite/ld-elf/sec-to-seg.exp: Likewise.
* emulparams/m88kbcs.sh: Delete.
* scripttempl/m88kbcs.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.

Remove i370 support

include/
* elf/i370.h: Delete.
* opcode/i370.h: Delete.
bfd/
* Makefile.am: Remove i370 support.
* archures.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* cpu-i370.c: Delete.
* elf32-i370.c: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
opcodes/
* Makefile.am: Remove i370 support.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* i370-dis.c: Delete.
* i370-opc.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
binutils/
* readelf.c: Remove i370 support.
* testsuite/binutils-all/objdump.exp: Likewise.
gas/
* Makefile.am: Remove i370 support.
* app.c: Likewise.
* config/obj-elf.c: Likewise.
* configure.tgt: Likewise.
* doc/Makefile.am: Likewise.
* doc/as.texinfo: Likewise.
* testsuite/gas/all/gas.exp: Likewise.
* testsuite/gas/elf/warn-2.s: Likewise.
* testsuite/gas/lns/lns.exp: Likewise.
* config/tc-i370.c: Delete.
* config/tc-i370.h: Delete.
* doc/c-i370.texi: Delete.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
ld/
* Makefile.am: Remove i370 support.
* configure.tgt: Likewise.
* testsuite/ld-elf/compressed1d.d: Likewise.
* testsuite/ld-elf/group8a.d: Likewise.
* testsuite/ld-elf/group8b.d: Likewise.
* testsuite/ld-elf/group9a.d: Likewise.
* testsuite/ld-elf/group9b.d: Likewise.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/pr12851.d: Likewise.
* testsuite/ld-elf/pr12975.d: Likewise.
* testsuite/ld-elf/pr13177.d: Likewise.
* testsuite/ld-elf/pr13195.d: Likewise.
* testsuite/ld-elf/pr17615.d: Likewise.
* testsuite/ld-elf/pr21562a.d: Likewise.
* testsuite/ld-elf/pr21562b.d: Likewise.
* testsuite/ld-elf/pr21562c.d: Likewise.
* testsuite/ld-elf/pr21562d.d: Likewise.
* testsuite/ld-elf/pr21562i.d: Likewise.
* testsuite/ld-elf/pr21562j.d: Likewise.
* testsuite/ld-elf/pr21562k.d: Likewise.
* testsuite/ld-elf/pr21562l.d: Likewise.
* testsuite/ld-elf/pr21562m.d: Likewise.
* testsuite/ld-elf/pr21562n.d: Likewise.
* testsuite/ld-elf/pr22677.d: Likewise.
* testsuite/lib/ld-lib.exp: Likewise.
* emulparams/elf32i370.sh: Delete.
* scripttempl/elfi370.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.

Remove h8500 support

include/
* coff/h8500.h: Delete.
* coff/internal.h: Remove h8500 support.
bfd/
* Makefile.am: Remove h8500 support.
* archures.c: Likewise.
* coffcode.h: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* coff-h8500.c: Delete.
* cpu-h8500.c: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
opcodes/
* Makefile.am: Remove h8500 support.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* h8500-dis.c: Delete.
* h8500-opc.h: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
binutils/
* testsuite/binutils-all/objcopy.exp: Remove h8500 support.
* testsuite/lib/binutils-common.exp: Likewise.
gas/
* config/obj-coff.h: Remove h8500 support.
ld/
* Makefile.am: Remove h8500 support.
* configure.tgt: Likewise.
* emulparams/h8500.sh: Delete.
* emulparams/h8500b.sh: Delete.
* emulparams/h8500c.sh: Delete.
* emulparams/h8500m.sh: Delete.
* emulparams/h8500s.sh: Delete.
* scripttempl/h8500.sc: Delete.
* scripttempl/h8500b.sc: Delete.
* scripttempl/h8500c.sc: Delete.
* scripttempl/h8500m.sc: Delete.
* scripttempl/h8500s.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.

Remove h8300-coff support

include/
* coff/h8300.h: Delete.
bfd/
* Makefile.am: Remove h8300-coff support.
* coffcode.h: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* reloc16.c: Likewise.
* targets.c: Likewise.
* coff-h8300.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* testsuite/binutils-all/objcopy.exp: Remove h8300-coff support.
gas/
* config/obj-coff.h: Remove h8300-coff support.
* config/tc-h8300.c: Likewise.
* config/tc-h8300.h: Likewise.
* testsuite/gas/h8300/h8300.exp: Likewise.
* testsuite/gas/h8300/branch-coff.s: Delete.
* testsuite/gas/h8300/branchh-coff.s: Delete.
* testsuite/gas/h8300/branchs-coff.s: Delete.
* testsuite/gas/h8300/ffxx1-coff.d: Delete.
* testsuite/gas/h8300/ffxx1-coff.s: Delete.
* testsuite/gas/h8300/h8300-coff.exp: Delete.
ld/
* Makefile.am: Remove h8300-coff support.
* configure.tgt: Likewise.
* testsuite/ld-h8300/h8300.exp: Likewise.
* emulparams/h8300.sh: Delete.
* emulparams/h8300h.sh: Delete.
* emulparams/h8300hn.sh: Delete.
* emulparams/h8300s.sh: Delete.
* emulparams/h8300sn.sh: Delete.
* emulparams/h8300sx.sh: Delete.
* emulparams/h8300sxn.sh: Delete.
* scripttempl/h8300.sc: Delete.
* scripttempl/h8300h.sc: Delete.
* scripttempl/h8300hn.sc: Delete.
* scripttempl/h8300s.sc: Delete.
* scripttempl/h8300sn.sc: Delete.
* scripttempl/h8300sx.sc: Delete.
* scripttempl/h8300sxn.sc: Delete.
* testsuite/ld-h8300/relax-3-coff.d: Delete.
* testsuite/ld-h8300/relax-4-coff.d: Delete.
* testsuite/ld-h8300/relax-5-coff.d: Delete.
* testsuite/ld-h8300/relax-6-coff.d: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.

Remove IEEE 695 object support

include/
* ieee.h: Delete.
bfd/
* Makefile.am: Remove IEEE 695 support.
* archures.c: Likewise.
* bfd.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* doc/bfd.texinfo: Likewise.
* doc/bfdint.texi: Likewise.
* doc/bfdsumm.texi: Likewise.
* section.c: Likewise.
* targets.c: Likewise.
* ieee.c: Delete.
* libieee.h: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* Makefile.am: Remove IEEE 695 support.
* budbg.h: Likewise.
* doc/binutils.texi: Likewise.
* makefile.vms: Likewise.
* objcopy.c: Likewise.
* objdump.c: Likewise.
* rddbg.c: Likewise.
* ieee.c: Delete.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
gas/
* app.c: Remove IEEE 695 support.
* symbols.c: Likewise.
ld/
* ld.texinfo: Remove IEEE 695 support.
* mri.c: Likewise.

Remove tandem support

bfd/
* config.bfd: Remove tandem support.
ld/
* Makefile.am: Remove tandem support.
* configure.tgt: Likewise.
* emulparams/st2000.sh: Delete.
* scripttempl/st2000.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.

Remove sony newsos3 support

include/
* aout/host.h: Remove newsos3 support.
bfd/
* Makefile.am: Remove newsos3 support.
* aoutx.h: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* newsos3.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* testsuite/binutils-all/copy-2.d: Remove newsos3 support.
* testsuite/binutils-all/nm.exp: Likewise.
ld/
* Makefile.am: Remove newsos3 support.
* configure.tgt: Likewise.
* emulparams/news.sh: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.

Remove netware support

include/
* nlm/ChangeLog-9315: Delete.
* nlm/alpha-ext.h: Delete.
* nlm/common.h: Delete.
* nlm/external.h: Delete.
* nlm/i386-ext.h: Delete.
* nlm/internal.h: Delete.
* nlm/ppc-ext.h: Delete.
* nlm/sparc32-ext.h: Delete.
bfd/
* Makefile.am: Remove netware support.
* bfd-in.h: Likewise.
* bfd.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* doc/bfdint.texi: Likewise.
* ecoff.c: Likewise.
* targets.c: Likewise.
* libnlm.h: Delete.
* nlm-target.h: Delete.
* nlm.c: Delete.
* nlm32-alpha.c: Delete.
* nlm32-i386.c: Delete.
* nlm32-ppc.c: Delete.
* nlm32-sparc.c: Delete.
* nlm32.c: Delete.
* nlm64.c: Delete.
* nlmcode.h: Delete.
* nlmswap.h: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* .gitignore: Remove netware support.
* Makefile.am: Likewise.
* configure.ac: Likewise.
* doc/Makefile.am: Likewise.
* doc/binutils.texi: Likewise.
* testsuite/binutils-all/nm.exp: Likewise.
* nlmconv.c: Delete.
* nlmconv.h: Delete.
* nlmheader.y: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
gas/
* Makefile.am: Remove netware support.
* config/tc-i386.c: Likewise.
* configure.tgt: Likewise.
* config/te-netware.h: Delete.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
gprof/
* corefile.c: Remove netware support.
ld/
* Makefile.am: Remove netware support.
* configure.tgt: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Likewise.
* emulparams/i386nw.sh: Delete.
* emulparams/ppcnw.sh: Delete.
* scripttempl/nw.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.

Remove tahoe support

include/
* opcode/tahoe.h: Delete.
bfd/
* archures.c: Remove tahoe support.
* config.bfd: Likewise.
* configure.ac: Likewise.
* hosts/tahoe.h: Delete.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
opcodes/
* configure.ac: Remove tahoe support.
* configure: Regenerate.
binutils/
* testsuite/binutils-all/objdump.exp: Remove tahoe support.
gprof/
* Makefile.am: Remove tahoe support.
* corefile.c: Likewise.
* tahoe.c: Delete.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.

Automatic date update in version.in

Add x86-tdep.o to i386/amd64 target build

We get this error when doing a build with a single amd64 target (the
default when doing just ./configure on x86-64 GNU/Linux):

/home/simark/src/binutils-gdb/gdb/i386-tdep.c:4431: error: undefined reference to 'x86_in_indirect_branch_thunk(unsigned long, char const**, int, int)'
/home/simark/src/binutils-gdb/gdb/amd64-tdep.c:3045: error: undefined reference to 'x86_in_indirect_branch_thunk(unsigned long, char const**, int, int)'

The problem is that commit

  1d509aa625f8 ("infrun: step through indirect branch thunks")

missed adding x86-tdep.o to the list of object file included in an amd64
or i386 build.  The problem is not seen with --enable-targets=all
because that file is included in ALL_TARGET_OBS.

Built-tested using:

  * --host=x86_64-pc-linux-gnu --target=x86_64-pc-linux-gnu
  * --host=armv7-rpi2-linux-gnueabihf --target=x86_64-pc-linux-gnu

gdb/ChangeLog:

* configure.tgt (x86_tobjs): New variable.
(amd64_tobjs, i386_tobjs): Use it.

x86: Allow 32-bit registers for tpause and umwait

Since only the first 32 bits of input operand are used for tpause and
umwait, the REX.W bit is skipped.  Both 32-bit registers and 64-bit
registers are allowed.

gas/

* testsuite/gas/i386/x86-64-waitpkg.s: Add 32-bit registers
tests for tpause and umwait.
* testsuite/gas/i386/x86-64-waitpkg-intel.d: Updated.
* testsuite/gas/i386/x86-64-waitpkg.d: Likewise.

opcodes/

* i386-dis.c (prefix_table): Replace Em with Edq on tpause and
umwait.
* i386-opc.tbl: Allow 32-bit registers for tpause and umwait in
64-bit mode.
* i386-tbl.h: Regenerated.

Automatic date update in version.in

Fix bug where --icf=safe triggers segfault when linking ARM.

When checking a R_ARM_TARGET[12] relocation, we need a valid target
pointer, but the garbage collection code was passing a NULL instead.

gold/
PR gold/23046
* gc.h (gc_process_relocs): Pass target to
scan.global_reloc_may_be_function_pointer.

powerpc common-page-size

max-page-size only matters for demand paged executables or shared
libraries, and the ideal size is the largest value used by your
operating system.  Values larger than necessary just waste file space
and memory.  common-page-size also affects file and memory size,
trading a possible small increase in file size for a decrease in
memory size when the operating system is using a common-page-size
page.  With a powerpc max-page-size of 64k and common-page-size of 4k
many executables will use no more memory pages when the system page
size is 4k than an executable linked with -z max-page-size=0x1000,
yet will still run on a system using 64k pages.  However, when running
on a system using 64k pages relro protection will not be completely
effective.

Due to the relro problem, powerpc binutils has been using a default
common-page-size of 64k since 2014-12-18 (git commit 04c6a44c7),
leading to complaints about increased file and memory sizes.  People
not using relro do have a valid reason to complain..

So this patch introduces an extra back-end value to use as the default
for common-page-size when generating relro executables, and enables
the support for powerpc.  Non relro executables will now be generated
with a default common-page-size of 4k.

bfd/
* elf-bfd.h (struct elf_backend_data): Add relropagesize.
* elfxx-target.h (ELF_RELROPAGESIZE): Provide default and
sanity test.
(elfNN_bed): Init relropagesize.
* bfd.c (bfd_emul_get_commonpagesize): Add boolean param to
select relropagesize.
* elf32-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000.
(ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE.
(ELF_MINPAGESIZE): Don't define.
* elf64-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000.
(ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE.
* bfd-in2.h: Regenerate.
ld/
* ldmain.c (main): Move config.maxpagesize and
config.commonpagesize initialization to..
* ldemul.c (after_parse_default): ..here.
* testsuite/ld-powerpc/ppc476-shared.d: Pass -z common-page-size.
* testsuite/ld-powerpc/ppc476-shared2.d: Likewise.

powerpc max-page-size vs __QNXTARGET__

The default max-page-size on ppc32 has been 64k since 1995-02-15 (git
commit bcbe2c71).  There was a change committed 2003-07-12 to chose a
4k page if __QNXTARGET__ is defined, but that particular commit was
from an earlier posted patch
https://sourceware.org/ml/binutils/2003-07/msg00211.html that only
made the change effective for arm, rather than the later one
https://sourceware.org/ml/binutils/2003-07/msg00220.html that also
changed powerpc and sh..

Since the __QNXTARGET__ #ifdef in elf32-ppc.c is ineffective unless
the user defines it in his or her CFLAGS, I'm removing that code.

* elf32-ppc.c (ELF_MAXPAGESIZE, ELF_COMMONPAGESIZE): Don't depend
on __QNXTARGET__ define.

powerpc-lynxos and powerpc-windiss fixes

Enabling shared lib tests showed the powerpc-lynxos target is broken,
and has been for a long time.  The breakage happened in a 2005-05-07
patch of mine, git commit 3b36f7e62, I think.  There have been no bug
reports I recall so it seems the target is dead.  powerpc-windiss is
similarly broken.

This patch fixes the breakage, and puts the targets on the obsolete
list.

bfd/
* config.bfd: Add powerpc-*-lynxos* and powerpc-*-windiss*
to obsolete list.
ld/
* emulparams/elf32ppcwindiss.sh: Rewrite to use elf32ppc.sh.
* emulparams/ppclynx.sh: Likewise.

Reinstate readelf decoding of i860 and i960 machine names

Decoding of EM_* ought to continue.

* readelf.c (get_machine_name): Revert 2018-04-11 change.

Automatic date update in version.in

Show line numbers in output for "info var/func/type"

The GDB commands "info variables", "info functions", and "info types" show
the appropriate list of definitions matching the given pattern.  They also
group them by source files.  But no line numbers within these source files
are shown.

The line number information is particularly useful to the user when a
simple "grep" doesn't readily point to a definition.  This is often the
case when the definition involves a macro, occurs within a namespace, or
when the identifier appears very frequently in the source file.

This patch enriches the printout of these commands by the line numbers and
adjusts affected test cases to the changed output where necessary.  The
new output looks like this:

  (gdb) i variables
  All defined variables:

  File foo.c:
  3: const char * const foo;
  1: int x;

The line number is followed by a colon and a tab character, which is then
followed by the symbol definition.  If no line number is available, the
tab is printed out anyhow, so definitions line up.

gdb/ChangeLog:

* symtab.c (print_symbol_info): Precede the symbol definition by
the line number when available.
* NEWS: Advertise this enhancement.

gdb/doc/ChangeLog:

* gdb.texinfo (Symbols): Mention the fact that "info
variables/functions/types" show source files and line numbers.

gdb/testsuite/ChangeLog:

* gdb.ada/info_types.exp: Adjust expected output to the line
numbers now printed by "info var/func/type".
* gdb.base/completion.exp: Likewise.
* gdb.base/included.exp: Likewise.
* gdb.cp/cp-relocate.exp: Likewise.
* gdb.cp/cplusfuncs.exp: Likewise.
* gdb.cp/namespace.exp: Likewise.
* gdb.dwarf2/dw2-case-insensitive.exp: Likewise.

btrace: set/show record btrace cpu

Add new set/show commands to set the processor that is used for enabling
errata workarounds when decoding branch trace.

The general format is "<vendor>:<identifier>" but we also allow two
special values "auto" and "none".

The default is "auto", which is the current behaviour of having GDB
determine the processor on which the trace was recorded.

If that cpu is not known to the trace decoder, e.g. when using an old
decoder on a new system, decode may fail with "unknown cpu".  In most
cases it should suffice to 'downgrade' decode to assume an older cpu.
Unfortunately, we can't do this automatically.

The other special value, "none", disables errata workarounds.

gdb/
* NEWS (New options): announce set/show record btrace cpu.
* btrace.c: Include record-btrace.h.
(btrace_compute_ftrace_pt): Skip enabling errata workarounds if
the vendor is unknown.
(btrace_compute_ftrace_1): Add cpu parameter.  Update callers.
Maybe overwrite the btrace configuration's cpu.
(btrace_compute_ftrace): Add cpu parameter.  Update callers.
(btrace_fetch): Add cpu parameter.  Update callers.
(btrace_maint_update_pt_packets): Call record_btrace_get_cpu.
Maybe overwrite the btrace configuration's cpu.  Skip enabling
errata workarounds if the vendor is unknown.
* python/py-record-btrace.c: Include record-btrace.h.
(recpy_bt_begin, recpy_bt_end, recpy_bt_instruction_history)
(recpy_bt_function_call_history): Call record_btrace_get_cpu.
* record-btrace.c (record_btrace_cpu_state_kind): New.
(record_btrace_cpu): New.
(set_record_btrace_cpu_cmdlist): New.
(record_btrace_get_cpu): New.
(require_btrace_thread, record_btrace_info)
(record_btrace_resume_thread): Call record_btrace_get_cpu.
(cmd_set_record_btrace_cpu_none): New.
(cmd_set_record_btrace_cpu_auto): New.
(cmd_set_record_btrace_cpu): New.
(cmd_show_record_btrace_cpu): New.
(_initialize_record_btrace): Initialize set/show record btrace cpu
commands.
* record-btrace.h (record_btrace_get_cpu): New.

testsuite/
* gdb.btrace/cpu.exp: New.

doc/
* gdb.texinfo: Document set/show record btrace cpu.

record: fix typo in "set record" output

Alan Hayward pointed out a typo in the output of "set record btrace" that
I took from "set record".  Fix the original.

gdb/
* record.c (set_record_command): Fix typo in message.

btrace: fix output of "set record btrace"

Instead of giving a message that "set record btrace" needs a sub-command,
GDB crashed.  Fix it.  A regression test comes with the next patch.

gdb/
* record-btrace.c (cmd_set_record_btrace): Print sub-commands.

infrun: step through indirect branch thunks

With version 7.3 GCC supports new options

   -mindirect-branch=<choice>
   -mfunction-return=<choice>

The choices are:

    keep                behaves as before
    thunk               jumps through a thunk
    thunk-external      jumps through an external thunk
    thunk-inline        jumps through an inlined thunk

For thunk and thunk-external, GDB would, on a call to the thunk, step into
the thunk and then resume to its caller assuming that this is an
undebuggable function.  On a return thunk, GDB would stop inside the
thunk.

Make GDB step through such thunks instead.

Before:
    Temporary breakpoint 1, main ()
        at gdb.base/step-indirect-call-thunk.c:37
    37        x = apply (inc, 41);
    (gdb) s
    apply (op=0x80483e6 <inc>, x=41)
        at gdb.base/step-indirect-call-thunk.c:29
    29        return op (x);
    (gdb)
    30      }

After:
    Temporary breakpoint 1, main ()
        at gdb.base/step-indirect-call-thunk.c:37
    37        x = apply (inc, 41);
    (gdb) s
    apply (op=0x80483e6 <inc>, x=41)
        at gdb.base/step-indirect-call-thunk.c:29
    29        return op (x);
    (gdb)
    inc (x=41) at gdb.base/step-indirect-call-thunk.c:23
    23        return x + 1;

This is independent of the step-mode.  In order to step into the thunk,
you would need to use stepi.

When stepping over an indirect call thunk, GDB would first step through
the thunk, then recognize that it stepped into a sub-routine and resume to
the caller (of the thunk).  Not sure whether this is worth optimizing.

Thunk detection is implemented via gdbarch.  I implemented the methods for
IA.  Other architectures may run into unexpected fails.

The tests assume a fixed number of instruction steps to reach a thunk.
This depends on the compiler as well as the architecture.  They may need
adjustments when we add support for more architectures.  Or we can simply
drop those tests that cover being able to step into thunks using
instruction stepping.

When using an older GCC, the tests will fail to build and will be reported
as untested:

    Running .../gdb.base/step-indirect-call-thunk.exp ...
    gdb compile failed, \
    gcc: error: unrecognized command line option '-mindirect-branch=thunk'
    gcc: error: unrecognized command line option '-mfunction-return=thunk'

                    === gdb Summary ===

    # of untested testcases         1

gdb/
* infrun.c (process_event_stop_test): Call
gdbarch_in_indirect_branch_thunk.
* gdbarch.sh (in_indirect_branch_thunk): New.
* gdbarch.c: Regenerated.
* gdbarch.h: Regenerated.
* x86-tdep.h: New.
* x86-tdep.c: New.
* Makefile.in (ALL_TARGET_OBS): Add x86-tdep.o.
(HFILES_NO_SRCDIR): Add x86-tdep.h.
(ALLDEPFILES): Add x86-tdep.c.
* arch-utils.h (default_in_indirect_branch_thunk): New.
* arch-utils.c (default_in_indirect_branch_thunk): New.
* i386-tdep: Include x86-tdep.h.
(i386_in_indirect_branch_thunk): New.
(i386_elf_init_abi): Set in_indirect_branch_thunk gdbarch
function.
* amd64-tdep: Include x86-tdep.h.
(amd64_in_indirect_branch_thunk): New.
(amd64_init_abi): Set in_indirect_branch_thunk gdbarch function.

testsuite/
* gdb.base/step-indirect-call-thunk.exp: New.
* gdb.base/step-indirect-call-thunk.c: New.
* gdb.reverse/step-indirect-call-thunk.exp: New.
* gdb.reverse/step-indirect-call-thunk.c: New.

Automatic date update in version.in

Fix -D_GLIBCXX_DEBUG gdb-add-index regression

Fedora Rawhide started to use -D_GLIBCXX_DEBUG which made gdb-add-index
failing:
gdb: Out-of-bounds vector access while running gdb-add-index
https://bugzilla.redhat.com/show_bug.cgi?id=1540559

/usr/include/c++/7/debug/safe_iterator.h:270:
Error: attempt to dereference a past-the-end iterator.
Objects involved in the operation:
    iterator "this" @ 0x0x7fffffffcb90 {
      type = __gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator<unsigned char*, std::__cxx1998::vector<unsigned char, gdb::default_init_allocator<unsigned char, std::allocator<unsigned char> > > >, std::__debug::vector<unsigned char, gdb::default_init_allocator<unsigned char, std::allocator<unsigned char> > > > (mutable iterator);
      state = past-the-end;
      references sequence with type 'std::__debug::vector<unsigned char, gdb::default_init_allocator<unsigned char, std::allocator<unsigned char> > >' @ 0x0x7fffffffcc50
    }

/usr/include/c++/7/debug/vector:417:
Error: attempt to subscript container with out-of-bounds index 556, but
container only holds 556 elements.
Objects involved in the operation:
    sequence "this" @ 0x0x2e87af8 {
      type = std::__debug::vector<partial_symbol*, std::allocator<partial_symbol*> >;
    }

The two -D_GLIBCXX_DEBUG regressions were made by:

commit bc8f2430e08cc2a520db49a42686e0529be4a3bc
Author: Jan Kratochvil <jan.kratochvil@redhat.com>
Date:   Mon Jun 12 16:29:53 2017 +0100
    Code cleanup: C++ify .gdb_index producer

commit af5bf4ada48ff65b6658be1fab8f9c8f8ab5f319
Author: Simon Marchi <simon.marchi@ericsson.com>
Date:   Sat Oct 14 08:06:29 2017 -0400
    Replace psymbol_allocation_list with std::vector

gdb/ChangeLog
2018-04-12  Jan Kratochvil  <jan.kratochvil@redhat.com>

PR gdb/23053
* dwarf-index-write.c (data_buf::grow) (write_one_signatured_type)
(recursively_write_psymbols) (debug_names::recursively_write_psymbols)
(debug_names::write_one_signatured_type): Fix -D_GLIBCXX_DEBUG
regression.

Remove old univariant code from rust-lang.c

Since moving Rust enum handling into dwarf2read.c, some old code for
handling univariant enums in rust-lang.c has been obsolete.  This
patch removes this code.

Tested on x86-64 Fedora 26, using rustc 1.23 (1.24 emits incorrect
DWARF for enums and so can't be used for this test).

2018-04-12  Tom Tromey  <tom@tromey.com>

* rust-lang.c (rust_print_struct_def): Remove univariant code.
(rust_evaluate_subexp): Likewise.

Fix Solaris build

This commit fixes a bit of rot in procfs.c caused by recent changes.

Specifically, the target_ops::to_detach change to pass down 'inferior
*' missed updating a forward declation, and the change to use
scoped_fd in more places missed removing one do_cleanups call.

  src/gdb/procfs.c: In function ‘target_ops* procfs_target()’:
  src/gdb/procfs.c:167:16: error: invalid conversion from ‘void (*)(target_ops*, const char*, int)’ to ‘void (*)(target_ops*, inferior*, int)’ [-fpermissive]
     t->to_detach = procfs_detach;
  ^
  src/gdb/procfs.c: In function ‘ssd* proc_get_LDT_entry(procinfo*, int)’:
  src/gdb/procfs.c:1624:17: error: ‘old_chain’ was not declared in this scope
      do_cleanups (old_chain);
   ^
  src/gdb/procfs.c: At global scope:
  src/gdb/procfs.c:90:13: error: ‘void procfs_detach(target_ops*, const char*, int)’ declared ‘static’ but never defined [-Werror=unused-function]
   static void procfs_detach (struct target_ops *, const char *, int);
       ^
  src/gdb/procfs.c:1923:1: error: ‘void procfs_detach(target_ops*, inferior*, int)’ defined but not used [-Werror=unused-function]
   procfs_detach (struct target_ops *ops, inferior *inf, int from_tty)
   ^

gdb/ChangeLog:
2018-04-12  Pedro Alves  <palves@redhat.com>

* procfs.c (procfs_detach): Make forward declaration's prototype
match definition's protototype.
(proc_get_LDT_entry): Remove stale do_cleanups call.

Eliminate target_has_exited

Nothing uses this.

gdb/ChangeLog:
2018-04-12  Pedro Alves  <palves@redhat.com>

* target.h (target_ops::to_has_exited): Delete.
(target_has_exited): Delete.
* target-delegates.c: Regenerate.

Fix the loading of the dynamic string table in a file without sections.

PR 23050
* readelf.c (process_dynamic_section): Correct dynamic string
table size calculation.