arch-arm: implement VMINNM scalar thumb

VMINNM was implemented at Iabbbca2932557cf6c98ce36690c385c3ddf39ed8 but
the thumb scalar encoding was missing. This patch implements it.

Change-Id: Ia29ec77dbd82f6be6b3d040a0e737794f52c33bf
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19108
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

base: Provide a getter for Fiber::started boolean variable

This can be used to check if the fiber has started its execution.

Change-Id: Ie9222b8076756363c9f82c1333c76a352bcaf817
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18648
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

base: Rename TestFiber into SwitchingFiber

This is done since TestFiber is too generic and it is not the only
Fiber's testing subclass in the unit test

Change-Id: Idc386f487091ae9bdadae865090a6719a25583da
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19153
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Fix WalkerState,Descriptors default constructor

Those POD strutures are not initializing all members at construction.
This could lead to undefined behaviour

Change-Id: Iaa8afb126382b6bfbef686883a026262f24d5ca1
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Javier Setoain <javier.setoain@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19149
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Implement a SMMUv3 model

This is an implementation of the SMMUv3 architecture.

What can it do?
- Single-stage and nested translation with 4k or 64k granule.  16k would
  be straightforward to add.
- Large pages are supported.
- Works with any gem5 device as long as it is issuing packets with a
  valid (Sub)StreamId

What it can't do?
- Fragment stage 1 page when the underlying stage 2 page is smaller.  S1
  page size > S2 page size is not supported
- Invalidations take zero time. This wouldn't be hard to fix.
- Checkpointing is not supported
- Stall/resume for faulting transactions is not supported

Additional contributors:
- Michiel W. van Tol <Michiel.VanTol@arm.com>
- Giacomo Travaglini <giacomo.travaglini@arm.com>

Change-Id: Ibc606fccd9199b2c1ba739c6335c846ffaa4d564
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19008
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem: Option to toggle DRAM low-power states

Adding an option to enable DRAM low-power states. The low power
states can have a significant impact on application performance
(sim_ticks) on the order of 2-3x, especially for compute-gpu apps.
The options allows for it to easily be enabled/disabled to compare
performance numbers. The option is disabled by default.

Change-Id: Ib9bddbb792a1a6a4afb5339003472ff8f00a5859
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18548
Reviewed-by: Wendy Elsasser <wendy.elsasser@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: Enable set size increase

Add NUMBER_BITS_PER_SET environment variable to control
the size of the bitmask in Set.hh (default=64).
Necessary for configs which require >64 instances of a given
machine type. This can be set in the build_opts file, e.g.
by adding the following line:
NUMBER_BITS_PER_SET = <number>

Change-Id: I314a3cadca8ce975fcf4a60d9022494751688e88
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18968
Reviewed-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

base: Fix missing headers to CircularQueue

CircularQueue is currently throwing compilation errors when creating
a derived class.

assert() needs <cassert>
ptrdiff_t needs <cstddef>
(u)intX_t need <cstdint>
random_access_iterator_tag needs <iterator>
is_same, enable_if and others need <type_traits>

Change-Id: I77a78e7b13f7a8b8e7e8b2b872065d78d1ab815a
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19089
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

Revert "mem-cache: Remove writebacks packet list"

This reverts commit bf0a722acdd8247602e83720a5f81a0b69c76250.

Reason for revert: This patch introduces a bug:

The problem here is that the insertion of block A may cause the
eviction of block B, which on the lower level may cause the
eviction of block A. Since A is not marked as present yet, A is
"safely" removed from the snoop filter

However, by reverting it, using atomic and a Tags sub-class that
can generate multiple evictions at once becomes broken when using
Atomic mode and shall be fixed in a future patch.

Change-Id: I5b27e54b54ae5b50255588835c1a2ebf3015f002
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19088
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu: Added the Multiperspective Perceptron Predictor (8KB and 64KB)

Described by the following article:
  Jiménez, D. "Multiperspective perceptron predictor."
  Championship Branch Prediction (CBP-5) (2016).

Change-Id: Iaa68ead7696e0b6ba05b4417d0322e8053e10d30
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/15495
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Ilias Vougioukas <ilias.vougioukas@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

x86: fix movsd bug on %xmm register

The movsd instruction should zero out half the register, but
does not do it. This changeset adds the necessary microop to
the instruction to cause correct behavior.

Change-Id: I5278da3634c78a97ed0586f687a36c6dc5a34c60
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19068
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

config, arm: memoryMode test

Commit 9a13acaa367769c38859342de9bc35aac59a6710 doesn't comply with the
same behaviour. The conditional test the memory mode on the same cluster,
while it should test the other cluster.

Change-Id: If3a7863f0905e66a548001d8e74689f5dd07179c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17748
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arm: Fix decoding of CRC32 instructions in thumb32

The CRC32 and CRC32C instructions are incorrectly decoded in thumb32
mode according to the latest manual:
https://developer.arm.com/docs/ddi0597/latest/top-level-encodings-for-t32/16-bit#dpint_2r

Change-Id: I9c6684f1ec7fe14d3b4cdf13f117a9819e046578
Signed-off-by: Chun-Chen TK Hsu
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19028
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu-o3: Increase LSQ buffer sizes to match max vector length

Change-Id: I5890c7cfa147125ce3389001f85d56d4b5a9911d
Signed-off-by: Gabor Dozsa <gabor.dozsa@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/13525
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arch-arm: Treat SVE prefetch instructions as no-ops

Change-Id: Ife0424e274dd65d6dc4f6e5cc5e37d17b03be0d8
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/13522
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Add initial support for SVE gather/scatter loads/stores

Change-Id: I891623015b47a39f61ed616f8896f32a7134c8e2
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/13521
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu: Fix rescheduling of progress check events

noRequestEvent needs to be rescheduled on recvRetry, otherwise the timeout
may be triggered even though packets are being eventually sent.
noResponseEvent scheduling is also fixed. This timeout should not be
active when we are not expecting a response.

Change-Id: If9edb75b5b803caf9f99bf41ea3948b15a3f3d71
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18793
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch: Add include guards to auto-gen. decode header

Change-Id: I03bfc9035b82bc1a42e799cf645d43cb5dafb4cb
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18911
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu-o3: Add support for pinned writes

This patch adds support for pinning registers for a certain number of
consecutive writes.  This is only relevant for timing CPU models
(functional-only models are unaffected), and it is primarily needed to
provide a realistic execution model for micro-coded operations whose
microops can write to non-overlapping portions of a destination
register, e.g. vector gather loads.  In those cases, this mechanism
can disable renaming for a sequence of consecutive writes, thus making
the resulting execution more efficient: allocating a new physical
register for each microop would introduce a read-modify-write chain of
dependencies, while with these modifications the microops can write
back in parallel.

Please note that this new feature is only leveraged by O3CPU for the
time being.

Additional authors:
- Gabor Dozsa <gabor.dozsa@arm.com>

Change-Id: I07eb5fdbd1fa0b748c9bdc1174d9f330fda34f81
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/13520
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch, base, cpu, gpu, sim: Merge getMemProxy and getVirtProxy.

These two functions were performing the same function but had two
different names for historical reasons. This change merges them
together, keeping the getVirtProxy name to be consistent with the
getPhysProxy method used to get a non-translating proxy port.

Change-Id: Idd83c6b899f9343795075b030ccbc723a79e52a4
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18581
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu: Store the translating proxy with the same pointer in SE or FS mode.

Only one is active at a time, so they can share the same pointer.

Change-Id: Ie4ae1f0ffbf9448f6730f9c7d072bc85d6d423da
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18580
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>

cpu, sim: Return PortProxy &s from all the proxy accessors.

This is a step towards merging the accessors for SE and FS modes.

Change-Id: I76818ab88b97097ac363e243be9cc1911b283090
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18579
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

kern: Replace an explicitly instantiated port proxy with one from the tc.

That avoids having to know what type of proxy to create.

Change-Id: I311e770ab720061b52f29df0dcc2273e028aa34a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18578
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch, base, sim: Demote (SE|FS)TranslatingPortProxy &s to PortProxy &s.

Al(most) all of the interesting differences between the two classes
have been removed. There are some control methods which are still
specific to each type which may require treating them as their true
type, but most code that consumes them doesn't need to worry about
which is which.

Change-Id: Ie592676f1e496c7940605b66e55cd7fae18e59d6
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18577
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

mem: Remove the now unused Copy* methods from the FS port proxy.

Change-Id: Ie433a9e4c9ee748911060eb7b1b47e617aa297a6
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18576
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arch, base, sim: Replace Copy(String)?(In|Out) with equivalent code.

This expands those functions into code which extracts the virt proxy
and then uses the appropriate method on it. This has two benefits.
First, the Copy* functions where mostly redundant wrappers around the
methods the proxy port already had. Second, using them forced a
particular port which might not actually be what the user wanted.

Change-Id: I62084631dd080061e3c74997125164f40da2d77c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18575
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim-se: const for loader's loadSection param

The port proxy can be declared as a reference to a const proxy
rather than just a reference to a proxy.

Change-Id: I4640b0c5f33e2334c1e7630131f78607ced40a34
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/12301
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

cpu: Added correct return type for ROB::countInsts

- return size_t (unsigned) according to the .size() return type
- fixed typo in doc (source of warning with some compilers)

Change-Id: I48ee2e317cf41011a6fcb5ca45aef67e75329bfa
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18948
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Accuracy-based rate control for prefetchers

Added a mechanism to control the number of prefetches generated
based in the effectiveness of the prefetches generated so far.

Change-Id: I33af82546f74a5b5ab372c28574b76dd9a1bd46a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18808
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

sim-se: add a release parameter to Process.py

Set the default release to that single value for all ISAs.

glibc has checks for the kernel version based on uname, and refuses
to start any syscall emulation programs if those checks don't pass with
error:

FATAL: kernel too old

The ideal solution to this problem is to actually implement all missing
system calls for the required kernel version and bumping the release
accordingly.

However, it is very hard to implement all missing syscalls and verify
compliance.

Previously, we have simply bumped the version manually from time to
time when major glibc versions started breaking.

This commit alleviates the problem in two ways.

Firstly, having a single kernel version for all versions means that it is
easier to bump all versions at once.

Secondly, it makes it is possible to set the release with a parameter,
which in turn can be set from the command line with:

se.py --param 'system.cpu[:].workload[:].release = "4.18.0"'

Change-Id: I9e3c31073bfe68735f7b0775c8e299aa62b98222
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17849
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Support for page crossing prefetches

Prefetchers can now issue hardware prefetch requests that go beyond
the boundaries of the system page. Page crossing references will need
to look up the TLBs to be able to compute the physical address to be
prefetched.

Change-Id: Ib56374097e3b7dc87414139d210ea9272f96b06b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/14620
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>

mem: Add a readString method to the PortProxy which takes a char *.

This version takes a char * instead of an std::string &, and a maximum
length to fill in like strncpy. This is intended to be a replacement
for the CopyStringOut function.

Change-Id: Ib661924a3fa7e05761d572ffecbe2c0cc8659d48
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18574
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

mem: Use a const T & in write<> to avoid an unnecessary copy.

If the type T is complex/large, the it makes sense to access it in place
and not copy it and then not modify it.

Change-Id: Idd24be4fbba636375637ff72b1ba5ee32eb76215
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18573
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch, base, dev, sim: Remove now unnecessary casts from PortProxy methods.

Change-Id: Ia73b2d86a10d02fa09c924a4571477bb5f200eb7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18572
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

mem, arm: Replace the pointer type in PortProxy with void *.

The void * type is for pointers which point to an unknown type. We
should use that when handling anonymous buffers in the PortProxy
functions, instead of uint8_t * which points to bytes.

Importantly, C/C++ doesn't require you to do any casting to turn an
arbitrary pointer type into a void *. This will get rid of lots of
tedious, verbose casting throughout the code base.

Change-Id: Id1adecc283c866d8e24524efd64f37b079088bd9
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18571
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

mem, arm: Move some helper methods into the base PortProxy class.

These were originally in the SETranslatingPortProxy class, but they're
not specific to SE mode in any way and are an unnecessary divergence
between the SE and FS mode translating port proxies.

Change-Id: I8cb77531cc287bd15b2386410ffa7b43cdfa67d0
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18570
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arm, mem: Move the SecurePortProxy subclass into it's own file.

The idea of a "secure" memory area/access is specific to ARM and
shouldn't be in the common mem directory, although it's built in to the
generic memory protocol at this point.

Regardless, it should minimially be in its own file like the virtual
and physical port proxy classes are.

Change-Id: I140d4566ee2deded784adb04bcf6f11755a85c0c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18569
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem: Parameterize coherent xbar sanity checks

Parameters can be used to change coherent xbar limits for the routing
table and outstanding snoops. We need the ability to tweak these values
as the current defaults may be violated in simulations with large core
counts.

Change-Id: Idb64b8c105683d02d8beba5bce13b815181ba824
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18789
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem: Snoop filter support for large systems

Changed SnoopMask to use std::bitset instead of uint64 so we can simulate
larger systems without having to workaround limitations on the number of
ports. No noticeable performance drop was observed after this change.
The size of the bitset is currently set to 256 which should fit most
needs.

Change-Id: I216882300500e2dcb789889756e73a1033271621
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18791
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

base: Add warn_if_once macro

Change-Id: Ie68f3b07a35ed2e6b0eee20b3b34050542fcdc6c
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18420
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu: Remove assert causing issues with x86 Linux boot

Change-Id: I5e0b189ced0dd59ac6dbbb2c498c068e132b9b93
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18910
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Fix fallthrough when trapping at EL2

This had been caused by the introduction of GICv3 registers trapping in
commit 32a23114c14cebc5ec0067ac739144b50e412219

Change-Id: I5073e2891f3ff5c5a9e05d3456dad6f4f8ffba0d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18909
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Trap virtual accesses to GICv3 SGI registers

According to GICv3 documentation, a virtual write (which means
HCR.IMO/FMO = 1) to ICC_SGI0R_EL1, ICC_SGI1R_EL1, ICC_ASGI1R_EL1 should
trap to EL2.

Change-Id: Ie7a952c2ff08590bb0c6e3854df567d714c2dc94
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17990
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Expose haveGicv3CPUInterface to the ISA interface

Change-Id: I36232b7618ad875983f34b741c51f12ddb9ae166
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17989
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Change mcrMrc15TrapToHyp signature

This patch is moving MiscRegs reading inside the mcrMrc15TrapToHyp
helper function. Rather than passing registers as arguments,
we are just passing a ThreadContext pointer

Change-Id: I6636dd3a4f92f757479d8a8d2c47de050a0b9eae
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17988
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem: Add invalid context id check on LLSC checks

If the request's address is in the LLSC list, its context Id was being
fetched unconditionally, which could cause the assert at
Request::contextId() to fail.

Change-Id: Iae9791f81c8fe9a7fcd842cd8ab7db18f34f2808
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18792
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim-se: remove comment for code that moved

The page table code must have moved from this class, because
the comment no longer accurately reflects upon any of the
surrounding code.

Change-Id: If08a4298c1237a541d9875ddeaf3d3ecfd98e9db
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/12300
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

dev-arm: Provide a GICv3 ITS Implementation

This patch introduces the GICv3 ITS module, which is in charge of
translating MSIs into physical (GICv3) and virtual (GICv4) LPIs.  The
patch is only GICv3 compliant, which means that there is no direct
virtual LPI injection (this also means V* commands are unimplemented)
Other missing features are:

* No 2level ITS tables (only flat table supported)

* Command errors: when there is an error in the ITS, it is
IMPLEMENTATION DEFINED on how the ITS behaves.  There are three possible
scenarios (see GICv3 TRM) and this implementation only supports one of
these (which is, aborting the command and jumping to the next one).
Furter patches could make it possible to select different reactions

* Invalidation commands (INV, INVALL) are only doing the memory table
walks, assuming the current Gicv3Redistributor is not caching any
configuration table entry.

Change-Id: If4ae9267ac1de7b20a04986a2af3ca3109743211
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18601
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim-se: change syscall function signature

The system calls had four parameters. One of the parameters
is ThreadContext and another is Process. The ThreadContext
holds the value of the current process so the Process parameter
is redundant since the system call functions already have
indirect access.

With the old API, it is possible to call into the functions with
the wrong supplied Process which could end up being a confusing
error.

This patch removes the redundancy by forcing access through the
ThreadContext field within each system call.

Change-Id: Ib43d3f65824f6d425260dfd9f67de1892b6e8b7c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/12299
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim-se: remove /sys from special paths

Currently, the open system call implementation in SE mode
treats /sys/ as a special path that is opened using a
special open handler. The ROC runtime, however, reads
several files in /sys/ that are supported via path
redirection. Here we remove /sys/ from the special files
so that the necessary files may be read via path
redirection.

Change-Id: Ifdab38ea1e6cc486ad43aec96b6e032fe63f137d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/12127
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>

scons: Move the marshal binary to the build directory

The current marshal binary is in $BUILD/python/ directory which makes
the dynamic linker fail to find shared libraries with rpath information
when the marshal is executing. Moving $BUILD/python/marshal to
$BUILD/marshal solves this problem.

This is because the marshal binary is built with the same flags as gem5
binary. And if one adds rpath information with add_local_rpath() in some
SConscripts, the marshal binary will also link to those shared libraries
and have the same rpath information.  So it must be in the same
directory as gem5 binary such that the dynamic linker could find those
shared libraries with the rpath information.

Signed-off-by: Chun-Chen TK Hsu
Change-Id: I98d9c3e0180abefe6b2b6a78ee5a96324038eb53
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18888
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

misc: Added dot_writer for Ruby's network topology

Change-Id: Ic71ca7bc2eb4174d70afa368bc9cc987f3df89e9
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17548
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Add multi-prefetcher adaptor

This patch adds a meta-prefetcher that enables gem5's cache models to
connect to multiple prefetchers. Sub-prefetchers still use the
probes-based interface and training can be controlled
independently. However, when the cache requests a prefetch packet, the
adaptor traverses the priority list of prefetchers and uses the first
prefetcher that is able to generate a prefetch.

Kudos to Mitch Hayenga for the original version of this patch.

Change-Id: I25569a834997e5404c7183ec995d212912c5dcdf
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18868
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim: Make the Process create function use the object loader mechanism.

This gets rid of the big mass of #if-s around headers and around the
code which creates an object file.

As a nice side bonus, this also means that in addition to supporting
multiple OS/arch combinations simultaneously, the object file loader
could support multiple ISAs simultaneously as well, since each could
load and set up its object file loaders indepedently and without the
base process classes knowledge/involvement.

Change-Id: I0a19ad06e30e9062a96d27f00b66756eb3a595ba
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18631
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

x86: Add an object file loader for linux.

Change-Id: I283dd1f52fd020ad3c226eb00fc9216ee034c67f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18630
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sparc: Add an object file loader for linux and solaris.

Change-Id: I76bcbc06714f7d538f03a8311994a868de3640f1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18629
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

riscv: Add an object file loader for linux.

Change-Id: I3accca91cc4e02fa8e3a1169590cbe6696cf05e2
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18628
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Alec Roelke <alec.roelke@gmail.com>
Maintainer: Alec Roelke <alec.roelke@gmail.com>

power: Add an object file loader for linux.

Change-Id: I64ce81e98a6dc96754554d0fdcd7d16b8a2752d4
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18587
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>

mips: Add an object file loader for linux.

Change-Id: Icae6430a210076117cf2ceadce52d6efbe58a5f3
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18586
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arm: Add an object file loader for linux and freebsd.

Change-Id: Ie5fd187a4897aa608ffc12278b23d3ee8c0f323c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18585
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

alpha: Add an object file loader for linux.

Change-Id: I91c4019567bdf74b2517fda597121a6ad107cb86
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18584
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

base: Add a type for keeping track of object file loaders.

This avoids having a big pile of #if-s in sim/process.cc and allows
dynamically adding new types of object file loaders which might
recognize new arch/OS combinations.

Change-Id: Ie3b9c1aa2974d30a61afc4fcc529ffd6a74d43e0
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18583
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch, base, cpu, dev, mem, sim: Remove #if 0-ed out code.

This code will be preserved through version control, but otherwise
creates clutter and will rot in place since it's never compiled.

Change-Id: Id265f6deac445116843956ea5cf1210d8127274e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18608
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

configs: Generalize FileSystemConfig for non se.py

This patch updates the FileSystemConfig so it works with more kinds of
config scripts (e.g., the Learning gem5 scripts).

There are 4 main changes:
- Added system as a parameter to the config_filesystem function so the
function can search the system for the number of CPUs instead of relying
on options from Options.py
- Instead of calling redirect_paths everywhere config_filesystem is
used, now it is implicitly called.
- Cleaned up the Ruby scripts a bit to remove redundant calls to
config_filesystem
- Added a config_filesystem call to the Ruby Learning gem5 script
(currently the only Learning gem5 script that requires it).

In the future, I think it would be better to move the config_filesystem
call into simulate.py, probably into the instantiate function. I tried to
use the per-CPU configuration parameters instead of options from
Options.py, but that's not possible until after the SimObject params
have been finalized in instantiate.

Change-Id: Ie6501a7435cfb3ac9d2b45be3722388b34063b1e
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18848
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: implement VMINNM and VMAXNM scalar version

ARMv8.2 16-bit versions have not yet been implemented, but a placeholders
were created for them.

Refactor the nearby decoding tree to closely match the ARM spec A32 decode
table.

That piece of the tree can also be called from thumb which decodes it in
the same way, although the thumb decode table has a different terminology

The old code didn't match neither A32 or T32 terminologies, so it is
better to at least match one of them to help verify correctness.

Change-Id: Iabbbca2932557cf6c98ce36690c385c3ddf39ed8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18690
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: implement VMINNM and VMAXNM SIMD version

This instruction is backported from aarch64.

In order to use the existing fplibMinNum backend, we first move
VMIN and VPMIN to use fplib. Adding VMINNM is then trivial.

Change-Id: I404daabeb6079f60e51a648a06d5b3e54f1c24a9
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18689
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: rename operands to match spec in isa/formats/fp.isa

Matches ARM DDI 0487D.a decoding tables.

Change-Id: I48338ef956a04308d55d1022229ebe0962a8fe5d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18688
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: MOESI_CMP_dir cleanup

Removed unused states and actions

Change-Id: I3dc684c78d4b92d219e71522ddb706a13f9874d1
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18415
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: John Alsop <johnathan.alsop@amd.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

mem-ruby: Cache latencies for MOESI_CMP_dir

Modified both L1 and L2 controllers to take into account the cache
latency parameters. Default values in the configuration script updated
as well.

Change-Id: I72bb8dd29ee0b02da06e1addf13b266fe4d1e979
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18414
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

mem-ruby: Hit latencies defined by the controllers

Removed the icache/dcache hit latency parameters from the Sequencer.
They were replaced by the mandatory queue enqueue latency that is now
defined by the top-level cache controller. By default, the latency is
defined by the mandatory_queue_latency parameter. When the latency
depends on specific protocol states or on the request type, the protocol
may override the mandatoryQueueLatency function.

Change-Id: I72e57a7ea49501ef81dc7f591bef14134274647c
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18413
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

mem-ruby: Do not change blocked msg enqueue info

Updating the message counter and enqueue times when adding blocked
messages back to the queue does not make a lot of sense since these
messages are not new arrivals.
More importantly, this may lead to starvation. See the scenario below:

1) Request A for a blocked line X arrives
2) A is handled; X is blocked so A is stalled
3) Request B for X arrives; Reponse for X arrives
4) Response is handled; X unblocked; A added back to the request queue
5) B is handled ahead of A (since A's arrival was updated);
   X may become blocked again

If new requests keep comming for X, A may will be stalled forever.

Change-Id: Icad79f3f716a870e91cb3455437b8b3c35f130ac
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18412
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

mem-ruby: Unique ranks for MOESI_CMP_dir in ports

Setting different values for the rank parameter for all inputs ports.
If left unset, it defaults to 0. This may cause issues since the rank is
used as an index in the controller's list of stalled buffers.

Change-Id: Ie8ff660b7450df959292311040aebf802657efcf
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18411
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

mem-ruby: Change MOESI_CMP_Dir L2 addressing

L1 controller selects the L2 to message based on the assigned address
ranges instead of explicitly interleaving bits in the L1 controller. This
simplifies the L1 controller implementation a bit and allows for more
flexibility when changing the address->controller mapping.

Change-Id: Ie67999bb977566939432a5045f65dbd2da81816a
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18410
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

mem-ruby: Fix MOESI_CMP_dir debug msg

Change-Id: I3fd32bd2e81dbf9a8ea49a43727564b8a9d64767
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18409
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

mem-ruby: Prevent response stalls on MOESI_CMP_directory

When a message triggers a transition that has actions which allocate
TBEs, the generated code automatically includes a check for the TBETable
size before executing any action. If the table is full, the transition
returns TransitionResult_ResourceStall and no more messages from the
buffer are handled (until the next cycle).

This behavior may lead to deadlocks in the MOESI_CMP_directory protocol
since events triggered by the response queue may allocate TBEs (e.g.
L2 replacements triggered by the response queue). If the table is full,
the queue is stalled preventing other responses from freeing TBEs.

This patch fixes this by handling WRITEBACK_DIRTY_DATA/CLEAN_DATA messages
as requests and WB_ACK/WB_NACK as responses. All controllers are changed
to work with the new types. With this fix, responses are always
handled first in all controllers, and no response triggers TBE
allocations.

Change-Id: I377c0ec4f06d528e9f0541daf3dcc621184f2524
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18408
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: John Alsop <johnathan.alsop@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arch-arm: Do not check MustBeOne flag for TLB requests from the prefetcher

Allow TLB requests generated from prefetchers to override the
MustBeOne arch flag. This allows the prefetchers to issue requests
without having to know architecutre-specific flags.

Change-Id: Id83e0c93f3d1a614da11c4f344ab4dc594423672
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18768
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

configs: Fix duplicate branchPred reference in Simulation.py

Change-Id: I5ef5fb7ebc5fc2a4776adc43643c4df27efc341c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18769
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

Revert "cpu: fix how a thread starts up in MinorCPU"

This reverts commit 02dafc5498750d9734ba8f2a1608a846f90b71d1.
The commit was part of a patchset which broke MinorCPU regressions
(switcheroo)

Change-Id: I0a8098fc71abe5838014e587dbe372b258d8aa9f
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18604
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

Revert "cpu: stop scheduling suspended threads in MinorCPU"

This reverts commit 6a6668bbc4b038b98eb3ee64ffb034719316afd9.
The commit was part of a patchset which broke MinorCPU regressions
(switcheroo)

Change-Id: I3c16a6478ba44b9d27cdd3d64a710a356999df05
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18603
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

Revert "cpu: fix branching when thread is suspended in MinorCPU"

This reverts commit e437086341712f1435db655b3527ea29b3311f4e.
The commit was part of a patchset which broke MinorCPU regressions
(switcheroo)

Change-Id: Ib8482034c2402008ccfa552325a8eb31e731b619
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18602
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Use SatCounter for prefetchers

Many prefetchers re-implement saturating counters with ints. Make
them use SatCounters instead.

Added missing operators and constructors to SatCounter for that to
be possible and their respective tests.

Change-Id: I36f10c89c27c9b3d1bf461e9ea546920f6ebb888
Signed-off-by: Daniel <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17995
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Javier Bueno Hedo <javier.bueno@metempsy.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

base: Add operators to SatCounter

Add shift, add and subtract assignment operators, as well as
copy and move constructor and assignments to SatCounter, so
that it they can be used by the prefetchers.

Also add extra useful functions to calculate saturation
oercentile so that the instantiator does not need to be aware
of the counter's maximum value.

Change-Id: I61d0cb28c8375b9d2774a39011e4a0aa6fe9ccb7
Signed-off-by: Daniel <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17996
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

base: Add GTest to SatCounter

Add a GTest to the SatCounter class.

Change-Id: Iaf1b18db9fe8d7fe32e0e40c7947dcd1fd6cc33b
Signed-off-by: Daniel <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17994
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

base: Move SatCounter to base directory

Saturating counters are used by many objects, not only
the cpu predictors. Therefore, move the class to the
base folder so that it can be more easily used.

Change-Id: I26f799324bdd8720ab8834c72a2002149cee777c
Signed-off-by: Daniel <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17993
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

cpu: Revamp saturating counters

Revamp the SatCounter class, improving comments, implementing
increment, decrement and read operators to solve an old todo,
and adding missing error checking.

Change-Id: Ia057c423c90652ebd966b6b91a3471b17800f933
Signed-off-by: Daniel <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17992
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

config: add an option to list and select indirect branch predictor

Change-Id: I9a855d36de7d95b7785ff8a897899037cea6a3d8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/15320
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu: Make the indirect predictor into a SimObject

Change-Id: Ice6549773def7d3e944fae450d4a079bc351e2ba
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/15319
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: Replace string parameter in MultiBitSelBloomFilter

Replace string parameter from MultiBitSelBloomFilter's constructor
by their tokenized counterparts.

Change-Id: I2e3db109dc4814fa0e9c13259f1136a6c4083092
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18728
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Add initial support for SVE contiguous loads/stores

Thanks to Pau Cabre and Adria Armejach Sanosa for their contribution
of bugfixes.

Change-Id: If8983cf85d95cddb187c90967a94ddfe2414bc46
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/13519
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

cpu,mem: Add support for partial loads/stores and wide mem. accesses

This changeset adds support for partial (or masked) loads/stores, i.e.
loads/stores that can disable accesses to individual bytes within the
target address range.  In addition, this changeset extends the code to
crack memory accesses across most CPU models (TimingSimpleCPU still
TBD), so that arbitrarily wide memory accesses are supported.  These
changes are required for supporting ISAs with wide vectors.

Additional authors:
- Gabor Dozsa <gabor.dozsa@arm.com>
- Tiago Muck <tiago.muck@arm.com>

Change-Id: Ibad33541c258ad72925c0b1d5abc3e5e8bf92d92
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/13518
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

cpu: Add a memory access predicate

This changeset introduces a new predicate to guard memory accesses.
The most immediate use for this is to allow proper handling of
predicated-false vector contiguous loads and predicated-false
micro-ops of vector gather loads (added in separate changesets).

Change-Id: Ice6894fe150faec2f2f7ab796a00c99ac843810a
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17991
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bradley Wang <radwang@ucdavis.edu>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

config, sim-se: bugfix for 54c77aa0

The NULL ISA does not have some members for the options
class which are referenced by the FileSystemConfig
code.

Create default values for the members so that the
simulation does not fail during the configuration phase.

Change-Id: Ie65bf0e5550c964eae42d1df4c36c2c5bc4ea703
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18748
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>

configs: Fix FileSystemConfig import

Add source to FileSystemConfig import

Change-Id: I2cd70a332244cbdc58b1b7c06d589b4339f6e19a
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18709
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

tests: Fix import scope of test

Add missing scope delimiters to Alpha tester

Change-Id: Ib6796864c0dc8fc3108d9d2a7c2f770d2122889a
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18708
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

mem-ruby: Fix MOESI_CMP_directory blocked line handling

Using recycle in the L2 controllers to put messages back into the buffer
may lead to starvation when there are many L1 requests for the same line.
This can easily trigger the deadlock detection mechanism in configurations
with many cores (16+). Replacing recycle by stall_and_wait for L1
requests avoids this issue. wakeUpBuffers calls were added to all
transitions from transient to stable states.

Change-Id: I28b8aeacc48919ccf38e69653cd9205a4153514b
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17568
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Remove writebacks packet list

Previously all atomic writebacks concerned a single block,
therefore, when a block was evicted, no other block would be
pending eviction. With sector tags (and compression),
however, a single replacement can generate many evictions.

This can cause problems, since a writeback that evicts a block
may evict blocks in the lower cache. If one of these conflict
with one of the blocks pending eviction in the higher level, the
snoop must inform it to the lower level. Since atomic mode does
not have a writebuffer, this kind of conflict wouldn't be noticed.

Therefore, instead of evicting multiple blocks at once, we
do it one by one.

Change-Id: I2fc2f9eb0f26248ddf91adbe987d158f5a2e592b
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18209
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

mem-cache: Handle data expansion

When a block in compressed form is overwriten, it may change
its size. If the new compressed size is bigger, and the total
size becomes bigger than the block size, one or more blocks
will have to be evicted. This is called data expansion, or
fat writes.

This change assumes that a first level cache cannot have a
compressor, since otherwise data expansion should have been
handled for atomic operations and writes. As such, data
expansions should only be seen on writebacks. As writebacks
are forwarded to the next level when failed, there should
be no data expansions when servicing misses either.

This patch adds the functionality to handle data expansions
by evicting the co-allocated blocks to make room for an
expanded block.

Change-Id: I0bd77bf6446bfae336889940b2f75d6f0c87e533
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/12087
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Add co-allocation function to compressed tags

Implement a co-allocation function in compressed tags, so
that compressed blocks can be co-allocated in a superblock.
Co-allocation is possible when compression ratio (CR) blocks
that share a superblock tag can be compressed to up to (100/CR)%
of their size.

Change-Id: I937cc1fcbb488e70309cb5478c12db65f1b4b23f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/11411
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

mem-cache: Add compression and decompression calls

Add a compressor to the base cache class and compress within
block allocation and decompress on writebacks.

This change does not implement data expansion (fat writes) yet,
nor it adds the compression latency to the block write time.

Change-Id: Ie36db65f7487c9b05ec4aedebc2c7651b4cb4821
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/11410
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

mem-cache: Create BDI Compressor

Implement Base-Delta-Immediate compression, as described in
'Base-Delta-Immediate Compression: Practical Data Compression
for On-Chip Caches'

Change-Id: I7980c340ab53a086b748f4b2108de4adc775fac8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/11412
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>