daemon: fix parallel build

The 'ready' target creates a symlink in the libslack/ subdirectory to make
up the path to header files.  Unfortunately, the target building sources
files that need that symlink, does not depend on the 'ready' target.  This
might break highly parallel builds.  As a workaround make the 'ready' target
before making 'all'.

Should fix:
http://autobuild.buildroot.net/results/ed2/ed21ac166f2151aa69a7790a17ff05f05afa512d/
http://autobuild.buildroot.net/results/333/3338539743c8b0399c6b0fcbbb7c28b58bf3f387/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpir: fix build on powerpc64le

The optimized powerpc64 code is not compatible with powerpc64le, so use
the generic MPIR code on powerpc64le.

Fixes:

   http://autobuild.buildroot.net/results/17e523be894b60d7a9b2a3303f02c3fb34816828/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpir: fix build on mips32r6/mips64r6

The optimized mips32 and mips64 assembly code is not compatible with
mips32r6/mips64r6, so use the generic code of MPIR on such platforms.

Fixes:

 - http://autobuild.buildroot.net/results/db2542a2ec3029eda81738a7ae5faeb9ea4aedee/
   mips32r6 toolchain

 - http://autobuild.buildroot.net/results/50b94e6d0dbc33664c6bfe06f83b211083aa07f7/
   mips64r6 toolchain

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpir: fix build on ARM Thumb-only platforms

The optimized ARM assembly code is not suitable for Thumb-only
platforms, so use the generic code in such situations.

Fixes:

  http://autobuild.buildroot.net/results/4d7f2a1326f75e11693bdd51ad274079b0dd0ce4/
  (ARM Cortex-M4 toolchain)

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpir: fix build on ARM with old binutils versions

Old binutils versions are affected by a bug when the assembly code has
whitespace between [ ] signs, causing a build failure of the mpir
package with ARM toolchains using such old binutils versions.

This commit fixes that by adding a patch that removes those whitespaces.

Fixes:

 - http://autobuild.buildroot.net/results/ec67ffdef74b9a61d0491e71f8cb2f8f0b6daa50/
   armv7-ctng-linux-gnueabihf Crosstool-NG toolchain

 - http://autobuild.buildroot.net/results/2e4a27af60065db51aca9e69701bc191d24b2209/
   armv5-ctng-linux-gnueabi Crosstool-NG toolchain

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xfsprogs: note musl incompatibility reason

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpv: fix X11 logic after bump to 0.25.0

Between 0.24.0 and 0.25.0, mpv has changed its logic around the
detection/usage of X11 (in upstream commit
https://github.com/mpv-player/mpv/commit/927afa311d4a89b022305508acbf4e7325fe3928). Instead
of having fine grained option for x11, xext, xinerama, xscreensaver and
xrandr, mpv now requires all five libraries to be available in order to
enable X.org support.

Therefore, this commit adjusts the mpv packaging so that:

 1. All necessary X11 libraries are selected if BR2_PACKAGE_XORG7 is
    enabled. It would indeed be too cumbersome for the user to know that
    all of x11, xext, xinerama, xscreensaver and xrandr are necessary in
    order to have X.org support.

 2. mpv.mk is simplified by enabling X.org support when
    BR2_PACKAGE_XORG7 is enabled.

Fixes:

  http://autobuild.buildroot.net/results/b470cfba451ce9ba648e3a2f3ae08429db8bdee9/
  (--disable-xss was used to disable xscreensaver support, and this
  option no longer exists)

[Peter: reword X11 comment in .mk]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2017.05-rc1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: Update for 2017.05-rc1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5base: fix examples compile with disabled gui module

Fixes [1]:

  Project ERROR: Could not find feature opengl.

[1] http://autobuild.buildroot.net/results/040/040ab283dbbec623fe5ff4eaece754d9701fafc5

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Revert "toolchain-external: CodeSourcery NiosII 2015.11 affected by PR19405"

An autobuilder exception has been added to avoid testing qt gui module
with the CodeSourcery NiosII toolchain. This allow to remove the
BR2_TOOLCHAIN_HAS_BINUTILS_BUG_19405 symbol.

This reverts commit 5dce3c05b5ea38539f6ee6efc24c13db936260dc.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/testing: add toolchain tests

This commit adds an initial toolchain test case, testing the ARM
CodeSourcery toolchain, just checking that the proper sysroot is used,
and that a minimal Linux system boots fine under Qemu.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/testing: add package tests

This commit adds some basic tests for two Buildroot packages: python and
dropbear. These tests are by no mean meant to be exhaustive, but mainly
to serve as initial examples for other tests.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/testing: add fs tests

This commit adds a number of test cases for various filesystem formats:
ext2/3/4, iso9660, jffs2, squashfs, ubi/ubifs and yaffs2. All of them
except yaffs2 are runtime tested. The iso9660 set of test cases is
particularly rich, testing the proper operation of the iso9660 support
with all of grub, grub2 and isolinux.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/testing: add core tests

This commit adds a few Buildroot "core" tests, testing functionalities
such as:

 - post-build and post-image scripts
 - root filesystem overlays
 - timezone support

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/testing: core testing infrastructure

This commit adds the core of a new testing infrastructure that allows to
perform runtime testing of Buildroot generated systems. This
infrastructure uses the Python unittest logic as its foundation.

This core infrastructure commit includes the following aspects:

 - A base test class, called BRTest, defined in
   support/testing/infra/basetest.py. This base test class inherited
   from the Python provided unittest.TestCase, and must be subclassed by
   all Buildroot test cases.

   Its main purpose is to provide the Python unittest setUp() and
   tearDown() methods. In our case, setUp() takes care of building the
   Buildroot system described in the test case, and instantiate the
   Emulator object in case runtime testing is needed. The tearDown()
   method simply cleans things up (stop the emulator, remove the output
   directory).

 - A Builder class, defined in support/testing/infra/builder.py, simply
   responsible for building the Buildroot system in each test case.

 - An Emulator class, defined in support/testing/infra/emulator.py,
   responsible for running the generated system under Qemu, allowing
   each test case to run arbitrary commands inside the emulated system.

 - A run-tests script, which is the entry point to start the tests.

Even though I wrote the original version of this small infrastructure, a
huge amount of rework and improvement has been done by Maxime
Hadjinlian, and squashed into this patch. So many thanks to Maxime for
cleaning up and improving my Python code!

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rpi-firmware: extend vcdbg architecture dependency comment

The main reason why vcdbg is only available on ARM is the fact that this is
a prebuilt ARM binary rather than the rpi-userland dependency, so adjust the
comment to clarify.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/cmake: propagate libuv dependencies

In c2c06a6de02,  cmake version was bumped and a new dependency on libuv
was added, but it did not propagate all the dependencies of libuv,
missing sync_4 (probably because sync_4 was added after the patch was
sent on the list, but before it was applied to the tree).

Fix that, which fixes unmet dependencies.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/rpi-firmware: fix unmet dependencies

Currently, vcdbg is only supported in 32-bit mode. Furthermore, vcdbg
needs rpi-userland, which we currently only support in 32-bit mode.

Add a dependency on BR2_arm.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

connman: update musl incompatibility reason

connman no longer triggers a conflict of userspace and kernel headers since
commit 69ced96355 (musl: workaround kernel if_ether.h header conflict). The
real blocker for musl build (besides a few missing includes here and there)
is the missing res_ninit() implementation. Update the comment accordingly.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/sunxi-mali: remove sunxi-mali libMali for r2p4 Mali kernel modules

sunxi-mali userspace drivers (libMali.so) for r2p4 Mali kernel modules
are linked against libUMP.so.2 but libump package in Buildroot only
provide libUMP.so.3.

In upstream commit 1c5063f43cdc9de341c0d63b2e3921cab86c7742 [1], library
versioning was added. For the r3p* libraries, libUMP.so.3 is used (and
provided by Buildroot libump package), but for the r2p* libraries,
libUMP.so.2 is used (and not provided by Buildroot libump package).

Due to this any program or library trying to link with -lGLESv2 or -lEGL
will fail with the following error:

arm-none-linux-gnueabi/bin/ld: warning: libUMP.so.2, needed by output/host/usr/arm-buildroot-linux-gnueabi/sysroot/armv4t/usr/lib/libMali.so, not found (try using -rpath or -rpath-link)

output/host/usr/arm-buildroot-linux-gnueabi/sysroot/armv4t/usr/lib/libEGL.so: undefined reference to `ump_close'
output/host/usr/arm-buildroot-linux-gnueabi/sysroot/armv4t/usr/lib/libEGL.so: undefined reference to `ump_mapped_pointer_get'
output/host/usr/arm-buildroot-linux-gnueabi/sysroot/armv4t/usr/lib/libEGL.so: undefined reference to `ump_secure_id_get'
output/host/usr/arm-buildroot-linux-gnueabi/sysroot/armv4t/usr/lib/libEGL.so: undefined reference to `ump_mapped_pointer_release'
output/host/usr/arm-buildroot-linux-gnueabi/sysroot/armv4t/usr/lib/libMali.so: undefined reference to `ump_reference_add'
output/host/usr/arm-buildroot-linux-gnueabi/sysroot/armv4t/usr/lib/libMali.so: undefined reference to `ump_size_get'
output/host/usr/arm-buildroot-linux-gnueabi/sysroot/armv4t/usr/lib/libEGL.so: undefined reference to `ump_reference_release'
output/host/usr/arm-buildroot-linux-gnueabi/sysroot/armv4t/usr/lib/libEGL.so: undefined reference to `ump_open'
collect2: error: ld returned 1 exit status

Since nothing provides libUMP.so.2, this commit removes the
BR2_PACKAGE_SUNXI_MALI_R2P4 option and adds the BR2_ARM_EABIHF
dependency directly to sunxi-mali package.

Fixes:

  http://autobuild.buildroot.net/results/8d0/8d0b78798abf0c4ca124952d0d0455da6f8fa14f/

[1] https://github.com/linux-sunxi/sunxi-mali-proprietary/commit/1c5063f43cdc9de341c0d63b2e3921cab86c7742
[2] http://lists.busybox.net/pipermail/buildroot/2017-February/183500.html

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Francois Perrad <francois.perrad@gadz.org>
[Thomas: fix conflicts when applying on master, tweak commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

triggerhappy: bumped to 0.5.0 to fix systemd unit

This bumps the version of triggerhappy to 0.5.0
The systemd unit supplied by buildroot assumed that filename
globbing was supported by thd. But this was just recently
added. So with this version bump usage of "/dev/input/event*"
is now possible. Systemd Unit is adjusted accordingly.

eventtable.h patch was removed as this was patched upstream.

This patch fixes bug #9836.

Signed-off-by: Michael Heinemann <posted@heine.so>

libseccomp: enable on ARM

libseccomp can now be used on ARM, so allow it to be selected.

Fixes bug #9806.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libseccomp: introduce BR2_PACKAGE_LIBSECCOMP_ARCH_SUPPORTS

Instead of duplicating the architecture dependency between the main
option and the Config.in comment, add a
BR2_PACKAGE_LIBSECCOMP_ARCH_SUPPORTS hidden option.

This is done in preparation to enabling libseccomp on ARM.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/protobuf: needs gcc >= 4.5

Even with an upstream patch from protobuf v3.3 [1], the build fail with another issue:

In file included from google/protobuf/dynamic_message.cc:80:
./google/protobuf/map_field.h: In member function 'void google::protobuf::internal::MapField<Key, T, key_wire_type, value_wire_type, default_enum_value>::Swap(google::protobuf::internal::MapFieldLite<Key, T, kKeyFieldType, kValueFieldType, default_enum_value>*)':
./google/protobuf/map_field.h:139: error: object missing in reference to 'google::protobuf::internal::MapFieldBase::repeated_field_'
./google/protobuf/map_field_inl.h:342: error: from this location
./google/protobuf/map_field.h:150: error: object missing in reference to 'google::protobuf::internal::MapFieldBase::state_'
./google/protobuf/map_field_inl.h:344: error: from this location

Add a dependency on gcc >= 4.5.

[1] https://github.com/google/protobuf/commit/a83ac8663fb8042a881bc60b12a8bd3a0c03a3ff

Fixes:
http://autobuild.buildroot.org/results/77d/77dbb6bbbc0ea9e9bcdd22b10011ef9728c20d54
http://autobuild.buildroot.org/results/21f/21f5e1ea4f37e1d174604d6da78c0e916c89f1e3
http://autobuild.buildroot.org/results/24e/24e880086c87d40b5d79a90d805acc75b33d484c

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Mario J. Rugiero <mrugiero@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ltp-testsuite: needs threads NPTL

Fixes:
http://autobuild.buildroot.net/results/3e0/3e0bbf41e339e62422463773bf07945f048a9501

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/armadeus_apf9328_defconfig: remove RPC option

The BR2_TOOLCHAIN_BUILDROOT_INET_RPC has been removed in commit
98f7de8796b282e72d42d3fc4d82d8eec43c6053, following the removal from
upstream uClibc-ng of the RPC support.

However, armadeus_apf9328_defconfig was selecting this option, causing a
build failure due to the selection of a legacy option. We simply remove
it as anyway defconfigs should not needlessly enable toolchain options.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/builds/15762159

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/galileo_defconfig: remove legacy binutils version selection

Back when galileo_defconfig was added, an explicit binutils version was
used, because only binutils >= 2.25 had support for the
-momit-lock-prefix option, necessary to workaround a CPU issue.

Support for binutils 2.25 has now been removed from Buildroot, and
therefore the option no longer exists, causing a build failure. The
oldest binutils version that can be selected in Buildroot is binutils
2.26, which has support for -momit-lock-prefix. Therefore, we simply
remove the explicit binutils version selection.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/builds/15762201

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/snps_archs38_zebu: rename zebu to haps

As in upstream Linux zebu_hs_smp_defconfig was renamed to
haps_hs_smp_defconfig we update Linux kernel defconfig name
respectively.

Also it fixes build failure, pointed us by Arnout:
https://gitlab.com/buildroot.org/buildroot/builds/14419271

Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board/stmicroelectronics/stm32f469-disco: remove OpenOCD patches

Since the bump of OpenOCD from 0.9.0 to 0.10.0 in commit
3b6c74d708252a32fe172be944951396d419ba88, stm32f469_disco_defconfig
fails to build:

 - 0001-add-config.patch was merged in upstream OpenOCD (commit
   26045588f462476cee356d15a24944d6c26befb4).

 - 0002-flash-nor.patch was merged in upstream OpenOCD (commit
   3e219648c80a27f0519003f3b088cbb846e255d8)

Therefore, this commit removes the two patches that are no longer
necessary.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/builds/15762279

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/pc_x86_64_efi_defconfig: increase ext2 filesystem size

Since commit c6bca8cef0 removed autocalculation of the ext2 filesystem
size, the default size is now set to 60MB. However, this is too small
for pc_x86_64_efi_defconfig. Indeed, the ext2 filesystem contains the
kernel (4MB), the wireless modules (4MB), all firmware for wireless
modules (40MB), and the wifi userspace (9MB) and the udev hwdb (5MB)
which brings the total to 70MB.

Increase the filesystem size to 120000K, which is a nice and round
number and leaves enough space for overhead on a 128MB flash drive.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/builds/15762234

This commit is identical to 9c393ad2fdd2bb6a0955d91bc3d72741b9487b78
from Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>, except it
is done for pc_x86_64_efi_defconfig.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/beaglebone_qt5_defconfig: fix kernel build

In commit 4b2440b7dcc68369548c0f2be6984fe645fc6bb0 ("beaglebone: add DT
for BeagleBone Green"), both beaglebone_defconfig and
beaglebone_qt5_defconfig were updated to add "am335x-bonegreen" to the
list of Device Tree files to be produced.

However, beaglebone_qt5_defconfig uses an older kernel version than
beaglebone_defconfig, in which am335x-bonegreen doesn't exist.

Therefore, revert the change on beaglebone_qt5_defconfig.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/builds/15762182

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

.gitlab-ci.yml: sync with latest defconfig additions

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libubox: fix lua module install path

The LUAPATH variable is only used when installing the lua module, and
cmake knows very well how to do out-of-tree isntalls, so there is no
reason to include the staging path in LUAPATH, which will cause our
post-install sanity checks to kick in and whine:

    libubox: installs files in /home/lhk/workspace/orangepi/host/usr/a
    rm-buildroot-linux-gnueabihf/sysroot//home/lhk/workspace/orangepi

As for libuci, just pass the runtime LUAPATH.

Fixes #9856

Reported-by: linhuikui@gmail.com
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/openpowerlink: bump to v2.5.2

Remove upstream patch.

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nodejs: bump version to 7.10.0

See https://nodejs.org/en/blog/release/v7.10.0/

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nodejs: remove support for coffeescript

BR2_PACKAGE_NODEJS_MODULES_COFFEESCRIPT has been deprecated.  To continue
using add coffee-script to BR2_PACKAGE_NODEJS_MODULES_ADDITIONAL.

Fixes:
http://autobuild.buildroot.org/results/0e4fb1a615ab9654ad2b4b1274a34583e02aa44e
http://autobuild.buildroot.org/results/fabf2f5f25c62be615fd09e59e6ad9234385645f
http://autobuild.buildroot.org/results/8653d78a190df1e691f52a911d8153104c46226b
http://autobuild.buildroot.org/results/2fc7e5e64ad6ced02a47e5062176d316eed0f43b

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nodejs: remove support for express

BR2_PACKAGE_NODEJS_MODULES_EXPRESS has been deprecated.  To continue using
add express to BR2_PACKAGE_NODEJS_MODULES_ADDITIONAL

Fixes:
http://autobuild.buildroot.org/results/fcfa38e98c22c8809452f7d0ee86dfe2e9d2482f
http://autobuild.buildroot.org/results/946996fa78c7814d1e0ea0ef1239c6eb0c7aa8dd
http://autobuild.buildroot.org/results/df920e7b17617f1e4867d94eda52cab38f7b0622

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ltp-testsuite: builds fine with our uClibc configuration

The ltp-testsuite now builds fine with our default uClibc
configuration, so remove the Config.in comment and the part of the
Config.in help text related to building with uClibc.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wpan-tools: add patch to fix build with libnl 3.3.0

Fixes:

  http://autobuild.buildroot.net/results/4680e17c3b9bc6714bd511d5beccccdfb976b6f9/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rpi-wifi-firmware: new package

Add firmware (NVRAM data) for the Raspberry Pi 3 and Zero W wifi module.

Notice that linux-firmware provides the main firmware
(brcmfmac43430-sdio.bin), but the module also needs board specific
configuration (NVRAM) data.

For the rpi, this data is available in the RPI firmware-nonfree git repo.
As this repo contains a lot of unrelated data (~70MB), simply download the
single NVRAM file instead of cloning the entire repo.

A similar approach is used by openwrt and opensuse:

https://dev.openwrt.org/browser/trunk/package/firmware/brcmfmac43430-firmware/Makefile?rev=49139
https://build.opensuse.org/package/view_file/hardware/bcm43xx-firmware/bcm43xx-firmware.spec?rev=b1628448b36c85abc9215eab4785ef29

[Peter: add _FIRMWARE_LICENSE as suggested by Yann]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dbus: fix dbus symlink removal

There was already a post-build hook to delete the /var/lib/dbus symlink
created by buildroot after the package's own installation, to prevent
a dbus installation error during "make dbus-rebuild".  However, this
misses the case for when one might delete the .stamp_target_installed
file manually, outside of dbus-rebuild.  This can be fixed by changing
the post-build hook to a pre-install hook.  This seems appropriate,
since it is really addressing an installation issue, not a build issue.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

poppler: add missing std::vector include for Qt code

Fixes [1], [2]:

  ../../poppler/Form.h:544:14: error: ‘vector’ in namespace ‘std’ does not name a template type
     const std::vector<Ref> &getCalculateOrder() const { return calculateOrder; }

  ../../poppler/Form.h:556:8: error: ‘vector’ in namespace ‘std’ does not name a template type
     std::vector<Ref> calculateOrder;

[1] http://autobuild.buildroot.net/results/b749b252f63945f278358dcd76b6e9c55214ccd8
[2] http://autobuild.buildroot.net/results/92e68defe746eb4852b3a45bb27af2282d3f4c7e

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/miraclecast: drop legacy systemd-kdbus select

This options was recently removed and made it to legacy (in 815f7137739)
but miraclecast still selects it.

miraclecast builds fine without it, it seems, so just drop the select
altogether.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/kyua: fix unmet dependencies

lutok is a lua module, so it depends on ! static libs. However, the
dependency is implicit, being done because the lua modules are sourced
globally under an if-block, and thus it is not easy to find that
dependency.

Propagate that dependency to kyua, which was missing it (because it is
not a lua module, so was missing the dependency).

[Peter: also update toolchain comment]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gmp: Enable ASM for ARC again

This commit reverts cdf63517de25 "gmp: disable assembly for arc"
as in GMP v6.1.2 there's already a proper fix for ASM constraints, see
https://gmplib.org/repo/gmp/rev/58879634af3ci

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libnl: bump to version 3.3.0

Drop upstream patches. Renumber remaining patches.

Add a revert of upstream patch to fix static build. Upstream pull request
(#141) is pending.

Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-tornado: bump to version 4.5.1

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

bluez5_utils: allow building the midi profile

The midi profile was introduced in BlueZ 5.44.

Cc: Marcin Bis <marcin@bis.org.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

bluez5_utils: allow enabling formerly experimental plugins

Disregard to increase just minor version BlueZ 5.44 is drastically different in
a way what plugins that used to be enabled by the --enable-experimental
configure option, now have their own option.

Extend Buildroot package to cover these plugins.

Cc: Marcin Bis <marcin@bis.org.pl>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

bluez5_utils: correct the experimental option text

In BlueZ 5.44 the --enable-experimental configure option only controls the
build of the Nokia OBEX PC Suite plugin. Correct the option prompt and help
text.

Cc: Marcin Bis <marcin@bis.org.pl>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

bluez5_utils: allow install of deprecated tools

Since BlueZ 5.44 many command line tools are deprecated, among them
gatttool. Add an option to install these tools.

Remove the gatttool specific option, since it is redundant now.

Fixes:
http://autobuild.buildroot.net/results/ddb/ddb975c9e1475fee1da63cb21240d8d59b161076/
http://autobuild.buildroot.net/results/19a/19adc0aa5a7e48119ef4ba25ba0403867f74f678/
http://autobuild.buildroot.net/results/9bd/9bd8e13ddffdd0631ddca30ec40cc4664729b0cb/

Cc: Marcin Bis <marcin@bis.org.pl>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lttng-tools: disable on uClibc/musl

lttng-tools has been broken on uClibc/musl since a long time due to
dlmopen() and LM_ID_BASE not being implemented. The issue has been
reported to the upstream lttng developers more than two months ago [1],
and no fix has been provided. Therefore, it's time to disable it on
uClibc and musl.

Fixes:

  http://autobuild.buildroot.net/results/f9e82a87618bcdcd46d670697b5ac75836f7250d/
  (uclibc)

  http://autobuild.buildroot.net/results/cb0952483b580b053a585760e59d78d11f46fc60/
  (musl)

[1] https://lists.lttng.org/pipermail/lttng-dev/2017-February/026921.html

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

binutils: disallow selection of 2.27 on ARM/noMMU

binutils 2.27 triggers a segfault in elf2flt on ARM/noMMU. While Arnout
has identified a binutils 2.28 commit that can be backported on 2.27,
this commit is huge and we don't clearly understand the impact.

Since both binutils 2.26 and 2.28 are unaffected by this issue, we
simply disallow the selection of binutils 2.27 on ARM/noMMU, and default
to binutils 2.28.

Fixes:

  http://autobuild.buildroot.net/results/e14cadb290b0b86cac12c4bfb681eb6eee9e6dea/
  and lots of other similar ARM/Cortex-M4 failures

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lua-resty-http: correct license file path

LICENSE file is present in subdirectory.

Fixes:
  http://autobuild.buildroot.net/results/d33/d33a322b4d2618b55849b5637082100702a91eea

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qemu: fix user mode emulation build on ARM

This commit adds a patch that adjusts how the mcontext structure is used
on ARM with a uClibc C library.

Fixes:

  http://autobuild.buildroot.net/results/79900b22c190e883b6d9a3075e1286ec95840ae1/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libunwind: disable for x86 with musl

libunwind use sigreturn() and setcontext() while building for x86 [1]
but this function is not available with musl [2].

This throw a warning during libunwind build:
In file included from x86/Los-linux.c:4:0:
x86/Gos-linux.c: In function ‘_ULx86_local_resume’:
x86/Gos-linux.c:298:7: warning: implicit declaration of function ‘sigreturn’ [-Wimplicit-function-declaration]
      sigreturn (sc);
      ^
But any program trying to link against libunwind-generic.so or
libunwind.so fail to build:
[...]/usr/lib/libunwind-generic.so: undefined reference to `sigreturn'
[...]/usr/lib/libunwind-generic.so: undefined reference to `setcontext'
collect2: error: ld returned 1 exit status

Disable libunwind for x86 target when musl is used.

Reported upstream by Waldemar [3]

[1] http://git.savannah.gnu.org/gitweb/?p=libunwind.git;a=blob;f=src/x86/Gos-linux.c;h=17aebc2974af50eb0bf8292689b2ed22a4c97866;hb=HEAD#l299
[2] http://openwall.com/lists/musl/2016/02/04/3
[3] http://lists.nongnu.org/archive/html/libunwind-devel/2017-04/msg00030.html

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/aubio: bump to version 0.4.5

Since aubio 0.4.4, the libsamplerate support require fftw
single precision mode [1].

[1] https://github.com/aubio/aubio/commit/8be88e77f5c275fdf4efc99ae182d14940948786

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libunwind: simplify architecture dependencies

BR2_ARM_CPU_HAS_ARM already embeddeds the fact that this is an ARM chip,
so (BR2_arm || BR2_armeb) is forcibly true when BR2_ARM_CPU_HAS_ARM is.

In other words, BR2_ARM_CPU_HAS_ARM can't be true unless either BR2_arm
or BR2_armeb itslef is true.

Simplify the logic accordingly.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nvidia-driver: bump version to 381.09

libnvidia-egl-wayland.so was renamed in upstream archive.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nvidia-driver: use http:// instead of ftp://

Fixes the download, which currently times out on http://.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: arc: Disable usage of atomic ops if hardware has no LLSC

Since uClibc-ng v1.0.20 we can force libc to either use llock/scond
instructions for atomic ops or if those are missing use kernel-assisted
emulation. By default atomics are used so we disable that feature in
libc if we build for a target without LLSC.

This allows us to build and use NPTL on ARC750 for example which was not
possible before.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

spidev_test: bump to version in Linux 4.10

spidev_test has further evolved after kernel version 3.15, which
is the most recent version that could be built in this package.
This change allows to build the latest version of spidev_test if
the toolchain's kernel header version allows it. In this way, when
building with a newer toolchain, we are able to benefit from the
added functionality offered by the newest version of the tool.

Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luvi: fix build with LuaJIT 2.0.5

Luvi got broken by the bump of LuaJIT from 2.0.4 to 2.0.5 due to a
hardcoded path.

Fixes:

 http://autobuild.buildroot.net/results/3eef12dbe07fb375e87b2b2898dcc5ef0c11e7a5/

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

e2fsprogs: add empty lines to .mk file

We usually have empty lines around multi-line variable definitions.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

e2fsprogs: only add -lintl for static builds

For dynamic library builds, it's not needed to pass it explicitly.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

e2fsprogs: avoid conflict with util-linux fsck wrapper

The fsck wrapper from util-linux is better maintained, so it should be
preferred. In particular, systemd relies on features in the util-linux
fsck wrapper that don't exist in the e2fsprogs one. However, since
e2fsprogs depends on util-linux, the one from e2fsprogs currently has
precedence. So in order to have e2fsck from e2fsprogs and the fsck
wrapper from util-linux, we disable e2fsprogs' fsck if the one from
util-linux is selected.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
CC: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[Arnout: don't add comment]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

e2fsprogs: add explicit --enable/--disable configure options

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Arnout: don't split up the fuse2fs CONF_OPTS and DEPENDENCIES
 handling]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

e2fsprogs: disable unneeded features for host

We don't need e2initrd_helper or the test I/O manager for the host, just
like we don't need it for the target.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Arnout: don't add --disable-rpath, since we *do* need rpath for the
 host; otherwise we have to explicitly pass LD_LIBRARY_PATH to be able
 to run tools linked with util-linux' libuuid/libblkid]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

e2fsprogs: add help text for all config options

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

e2fsprogs: refactor to fix conflicts with busybox and util-linux

So far we attempted to solve the conflicts between busybox and e2fsprogs
by removing busybox programs from /bin and /sbin, leaving the e2fsprogs
ones at /usr/bin and /usr/sbin. This fails with BR2_ROOTFS_MERGED_USR=y,
leading to situations like the one described in bug 9436.

We could provide a better solution by means of a fine-grained selection
of programs, like util-linux does, but this would require big changes in
e2fsprogs. So instead of resorting to dirty tricks we switch to a more
pragmatic approach:

- Drop all configs to select/deselect utilities without corresponding
  enable/disable options to the configure script. In other words, we
  always install the basic set of utilities.

- fsck has a configure option, so use it. Note that --enable-fsck is
  only about the wrapper, not about e2fsck.

- Install e2fsprogs utilities at /bin and /sbin, overriding the ones
  eventually installed by busybox.

- Let the e2fsprogs build system create the symlinks mkfs.ext2 -> mke2fs
  etc.  fsck.ext4dev and mkfs.ext4dev were dropped in version 1.43.4.

Notice that these changes do exactly the opposite of what is requested
in bug 9436. On the other hand the policy for e2fsprogs becomes coherent
with the one for util-linux: busybox never wins.

Fixes:
  https://bugs.busybox.net/show_bug.cgi?id=9436 (no fix, in fact)

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Arnout:
 - don't add 'default y' to resize2fs;
 - don't install the host package in /bin instead of /usr/bin - we
   install everything under /usr (until /usr will be removed, soon)]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lua-resty-http: new package

Signed-off-by: Semyon Kolganov <semenak94@mail.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

binutils: fix bfin compile error

Newer gcc requires even lower optimization, only with -O0 we
can successfully compile binutils for the target.

Fixes:
  http://autobuild.buildroot.net/results/fb95cd7f7fcc532d036ed8f13853bc6f9a64d1b3

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-ipython: Reformat help text to avoid warnings

Reformat help text in Config.in to avoid warnings from
check-package. No content change intended.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-simplegeneric: fix description

Use the description from https://pypi.python.org/pypi/simplegeneric.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-simplegeneric: New package

Add 'simplegeneric'[1] package to Buildroot. Needed by IPython.

[1] https://pypi.python.org/pypi/simplegeneric

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[Thomas: add entry in DEVELOPERS file, fix license.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-decorator: new package

Add 'decorator'[1] package to Buildroot. Needed by 'traitlets'
package, which is added in the next patch.

[1] https://pypi.python.org/pypi/decorator

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[Thomas: download from PyPi, add hash file, add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rapidjson: needs C++ support

Fixes:

  http://autobuild.buildroot.net/results/ac989c119e4ea90b8318795fe9cf8c3e9395a354/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libqmi: fix patch for canonicalize_file_name() issue

The patch added in commit c78b65c4f161ec101ff02880788ef22eb7c87d76 was
bogus: it adds some code conditionally on HAVE_CANONICALIZE_FILE_NAME
being undefined, but there is nothing that defines
HAVE_CANONICALIZE_FILE_NAME if canonicalize_file_name() is already
provided by the C library.

This commit fixes that by adding the appropriate autoconf check.

Fixes:

  http://autobuild.buildroot.net/results/4f0eb2af09c92ff4cd7448211ffda432754d4e60/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi-skin-confluence: new package

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas:
 - use SPDX license code
 - license is GPL-2.0, not GPL-2.0+
 - remove unused _CONF_OPTS variable]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ext2: add help text for BR2_TARGET_ROOTFS_EXT2_BLOCKS

Signed-off-by: J Evans <g4@novadsp.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libqmi: musl compat canonicalize_file_name

Adds an inline equivalent of canonicalize_file_name
using realpath().

Bug report (origin of this patch):
https://bugs.freedesktop.org/show_bug.cgi?id=99944

Resolves:
http://autobuild.buildroot.net/results/afa/afa4b97e012586585b11be1e70ed3c63a7c48a4d/

  CCLD     test-generated
  CCLD     test-utils
  CCLD     test-message
../../../src/libqmi-glib/.libs/libqmi-glib.so: undefined reference to `canonicalize_file_name'
collect2: error: ld returned 1 exit status
Makefile:440: recipe for target 'test-generated' failed

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uboot-tools: disable libfdt swig wrapper

The current tools build assumes the host system when trying to detect if
swig/python are present.  It then uses those tools from the path.

The upstream RFC included this commit set's patch but offered up
discussion on how to cleanly introduce a better method for detecting
swig and using the tools.  The tools build really needs to be sysroot
and prefix/host dir tools aware.

Upsteam submission for RFC:
https://lists.denx.de/pipermail/u-boot/2017-May/289520.html

Workaround for:
http://autobuild.buildroot.net/results/6d52ac8bb71012aea6fc4c679691b31a3366728b

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tinyxml2: fix build in static libs configuration

tinyxml2 can build both static and shared libraries. By default, only
shared library is built. Shared/static builds are controlled using
separate cmake flags BUILD_SHARED_LIBS and BUILD_STATIC_LIBS.

In static libs configuration, we internally pass -DBUILD_SHARED_LIBS=OFF
cmake flag to build system which disables both shared and static builds
of library, resulting in failures while linking executable with library.

So pass -DBUILD_STATIC_LIBS=ON cmake flag in case of static libs
configuration.

fixes:
  http://autobuild.buildroot.net/results/d30/d301bcbe5db26068b35eaa94bd816ae8cf8ef2e1

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 4.{4,9,10}.x series

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs: add raspberrypi3 64bits defconfig

This configuration builds a 64bit image for RaspberryPi 3.

The size of the ext4 filesystem has to be extended to fit the large amount
(~60MB) of kernel modules enabled in the defconfig.

[Peter: drop gcc version selection / glibc, explain ext4 size requirement]
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openssh: add support for HW SSL engines

Enable support for OpenSSH to use a hardware SSL engine if
cryptodev-linux is included. Without this, OpenSSH uses only
OpenSSL software crypto implementation.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
CC: Baruch Siach <baruch@tkos.co.il>
CC: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rpi-bt-firmware: new package

Add firmware file for the Raspberry Pi 3 and Zero W Bluetooth module.

Note that to successfully download the firmware bluez5_utils needs a patch[1].

Even though the firmware file name (BCM43430A1.hcd) only mentions the
Bluetooth module, it is most likely tailored for the Raspberry Pi boards.
Firmware for the same BT module on other boards look different. For this
reason the name of the package is rpi-bt-firmware.

[1] http://www.spinics.net/lists/linux-bluetooth/msg69470.html

[Peter: correct Config.in ordering]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

picocom: force target LDFLAGS

This allows a static build of picocom when BR2_STATIC_LIBS=y but the toolchain
provides static and shared libraries.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

picocom: bump to version 2.2

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dtc: bump version to 1.4.4

Adds overlay support.

Drop the non-upstreamed 0002-extra-cflags.patch and instead simply pass the
needed CFLAGS as make arguments.  Passing the full upstream warning flags
are not important in the Buildroot context, so this is simpler than
maintaining a patch.

Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

empty: bump to version 0.6.20b

Drop upstream patch.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

moarvm: bump version to 2017.04

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/rapidjson: switch to CMake

Upcoming Kodi v18 depends on RapidJSON and detects it by using pkg-conf:
https://github.com/xbmc/xbmc/blob/master/cmake/modules/FindRapidJSON.cmake#L13

Currently our package installs only the header files, but RapidJSON.pc
is also needed. Luckily this can be fixed by switching to CMake which
does the job, also add configure options to disable the CMake build of
executables.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: bump version to 2.4.13.2

Removed patch applied upstream:
https://github.com/opencv/opencv/commit/c7045184ce220a04796d8e9072ac42d2d362dc71

Renumbered remaining patches.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

daemon: new package

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/raspberrypi3: use correct CPU

We so far were using a Cortex-A7 as the CPU for the rpi3, as this was
the closest we had available, in 32-bit mode, to the real CPU used in
the rpi3.

But now we can also use the Cortex-A53 in 32-bit mode, so we use that,
which makes for an optimised build (A53 has an improved instruction set,
as compared to the A7).

Also drop the DTB overlay option, it defaults to 'y'.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Martin Bark <martin@barkynet.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libcsv: new package

libcsv is a small, simple and fast CSV library written in pure
ANSI C89 that can read and write CSV data.

Signed-off-by: David Graziano <david.graziano@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-netaddr: change setup type to setuptools

The latest netaddr version switched to setuptools.

Fixes:

http://autobuild.buildroot.net/results/e9b/e9b0013abe7e866fd224593f90ec30bdc809151f

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luajit: bump to version 2.0.5

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>