glsl: join calculate_array_size() and calculate_array_stride()

These helpers are ran for same case the same loop. Here joined
their operation so the loop is ran just once. Also fixed
out-of-memory condition here.

v2: Make the loop simpler to read as per Tapani's suggestion

Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Tested-by: Tapani Pälli <tapani.palli@intel.com>

mesa: expose support for OES/EXT_draw_elements_base_vertex to OpenGL ES

This has been tested with the piglits in the mailing list and
on the Dolphin emulator.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

nouveau: set MaxDrawBuffers to the same value as MaxColorAttachments

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org

nv50: use correct heaps for FP and GP code segments

This is just a cosmetic change. Trivial.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

mesa/sso: Add compute shader support

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Marta Lofstedt <marta.lofstedt@intel.com>
[itoral@igalia.com: Reviewed-by for all except the ctx->_Shader change]
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>

mesa/sso: Add MESA_VERBOSE=api trace support

v2:
 * Use %u for unsigned values (Iago)

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>

i965: Setup pull constant state for compute programs

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>

main/get: Add MAX_COMBINED_COMPUTE_UNIFORM_COMPONENTS

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Marta Lofstedt <marta.lofstedt@intel.com>

glsl: OpenGLES GLSL 3.1 precision qualifiers ordering rules

The OpenGLES GLSL 3.1 specification uses the precision qualifier
ordering rules from ARB_shading_language_420pack.

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Marta Lofstedt <marta.lofstedt@intel.com>

glsl: Add compute shader builtin variables for OpenGLES 3.1

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Marta Lofstedt <marta.lofstedt@intel.com>

nouveau: get rid of tabs

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

i965/sched: don't calculate live intervals for post-RA scheduling

For some reason, this causes assertions on gm965 only. In any case, it's
unnecessary since we don't need liveness information in the post-RA
scheduler.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92744
Cc: Mark Janes <mark.a.janes@intel.com>
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

virgl/vtest: fix extra malloc

This somehow got added twice, drop the first one.

Reported by Coverity.

Signed-off-by: Dave Airlie <airlied@redhat.com>

virgl: free sampler view on failure path

Reported by Coverity.

Signed-off-by: Dave Airlie <airlied@redhat.com>

gallium/swrast: fixup build breakage and warnings

The front buffer rendering changes broke an interface, I didn't
fix up all of them.

Signed-off-by: Dave Airlie <airlied@redhat.com>

gallium/swrast: fix front buffer blitting. (v2)

So I've known this was broken before, cogl has a workaround
for it from what I know, but with the gallium based swrast
drivers BlitFramebuffer from back to front or vice-versa
was pretty broken.

The legacy swrast driver tracks when a front buffer is used
and does the get/put images when it is mapped/unmapped,
so this patch attempts to add the same functionality to the
gallium drivers.

It creates a new context interface to denote when a front
buffer is being created, and passes a private pointer to it,
this pointer is then used to decide on map/unmap if the
contents should be updated from the real frontbuffer using
get/put image.

This is primarily to make gtk's gl code work, the only
thing I've tested so far is the glarea test from
https://github.com/ebassi/glarea-example.git

v2: bump extension version,
check extension version before calling get image. (Ian)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91930

Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

glsl: set image access qualifiers for AoA

Reviewed-by: Francisco Jerez <currojerez@riseup.net>

i965: Do legacy userclipping in OpenGL ES 1.x contexts.

Commit fba4823a disabled user clipping for everything except
compatibility profile.  Core profile and OpenGL ES 2.0+ have all removed
the classic, OpenGL 1.0 user clip planes.  ES 1.x, however, still has
them.

Fixes OpenGL ES 1.1 conformance mustpass.c and userclip.c

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Olivier Berthier <olivierx.berthier@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92639
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92641

gbm.h: Add a missing stddef.h include for size_t.

This was causing compilation issues when one of its providers wasn’t
already included before gbm.h.

Cc: "11.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

winsys/virgl: rework line wrapping/indent

Wrap some of the 'omg it's getting out of hand' long lines, and
re-indent where things feel off.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

virgl: unwrap the includes

Include what you want, rather than relying on a header foo.h N levels
down the include chain, to provide something that you need.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

winsys/virgl: remove temporary ret variable

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

winsys/virgl: always memset prior to ioctl

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

winsys/virgl: use MALLOC to match FREE

The uppercase versions are wrappers which must be matched.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

winsys/virgl: remove calloc/malloc casts

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

winsys/virgl: throw in some inline wrappers

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

virgl: introduce virgl_query() inline wrapper

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

virgl: use virgl_screen/surface upcast wrappers

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

virgl: introduce and use virgl_transfer/texture/resource inline wrappers

The only two remaining cases of (struct virgl_resource *) require a
closer look. Either the error checking is missing or the arguments
provided feel wrong.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

virgl: add virgl_context/sampler_view/so_target() upcast wrappers

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

winsys/virgl/drm: drop unneeded forward declaration

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

virgl: remove sw_winsys pointer from virgl_screen

The screen already has a pointer to the (base) winsys object.
With the latter of which implemented/sub-classed as either drm or sw
based one, depending on the target.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

virgl: rename virgl.h to virgl_screen.h

Provide a more meaningful name considering it's purpose.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

virgl: move virgl_hw.h into the driver dir

Strictly speaking virgl_hw.h should reside in the driver folder, as
it describes the hardware. Moving it allows us to nuke the following
strange dependency

winsys/vtest > driver > winsys/drm

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

virgl: straighten the includes confusion

Use the relevant GALLIUM_foo_CFLAGS which has all the requirements
(not to mention VISIBITY_CFLAGS) and keep ../ out of the include
directives.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

virgl: remove the _FILE_OFFSET_BITS defines

The build already sets it as needed.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

winsys/virgl/drm: add all files to the tarball

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

winsys/virgl/vtest: list all files in Makefile.sources

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

virgl: move sources list to Makefile.sources

... and add the missing files while we're at it.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

virgl: fix drm.h include path

The drm/ prefix is required, if using the kernel provided headers. As
most distros don't ship them it and we already depend on libdrm (which
adds the relevant -I flag) just drop the drm/ from the include.

Once a libdrm release with the virtgpu_drm.h header is released, we can
drop our local copy of the file.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

i965: enable ARB_shader_clock on gen7+

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Implement nir_intrinsic_shader_clock

v2:
 - Add a few const qualifiers for good measure.
 - Drop unneeded retype()s (Matt)
 - Convert timestamp to SIMD8/16, as fs_visitor::get_timestamp() returns
SIMD4 (Connor)

v3:
 - Remove unneeded temporary + MOV (Connor)

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965/fs: move the fs_reg::smear() from get_timestamp() to the callers

We're about to reuse get_timestamp() for the nir_intrinsic_shader_clock.
In the latter the generalisation does not apply, so move the smear()
where needed. This also makes the function analogous to the vec4 one.

v2: Tweak the comment - The caller -> We (Matt, Connor).
v3: More comment tweaks (Connor)

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

nir: add shader_clock intrinsic

v2: Add flags and inline comment/description.
v3: None of the input/outputs are variables
v4: Drop clockARB reference, relate code motion barrier comment wrt
intrinsic flag.
v5: Drop the "thus we can eliminate..." comment (Connor)

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: add support for the clock2x32ARB function

v2: correctly set the return type

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: add ARB_shader_clock infrastructure

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: add infra for ARB_shader_clock

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

nv50: do not create an invalid HW query type

While we are at it, store the rotate offset for occlusion queries to
nv50_hw_query like on nvc0.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Pierre Moreau <pierre.morrow@free.fr>

nv50: move HW queries to nv50_query_hw.c/h files

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Pierre Moreau <pierre.morrow@free.fr>

nv50: move nva0_so_target_save_offset() to its correct location

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Pierre Moreau <pierre.morrow@free.fr>

nv50: add a header file for nv50_query

Like for nvc0, this will allow to split different types of queries and
to prepare the way for both global performance counters and MP counters.

While we are at it, make use of nv50_query struct instead of pipe_query.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

st/va: add support to export a surface as dmabuf

I.e. implements:
VaAcquireBufferHandle
VaReleaseBufferHandle
for memory of type VA_SURFACE_ATTRIB_MEM_TYPE_DRM_PRIME

And apply relatives change to:
vlVaMapBuffer
vlVaUnMapBuffer
vlVaDestroyBuffer

Implementation inspired from cgit.freedesktop.org/vaapi/intel-driver

Tested with gstreamer-vaapi with nouveau driver.

Signed-off-by: Julien Isorce <j.isorce@samsung.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/va: implement VaDeriveImage

And apply relatives change to:
vlVaBufferSetNumElements
vlVaCreateBuffer
vlVaMapBuffer
vlVaUnmapBuffer
vlVaDestroyBuffer
vlVaPutImage

It is unfortunate that there is no proper va buffer type and struct
for this. Only possible to use VAImageBufferType which is normally
used for normal user data array.
On of the consequences is that it is only possible VaDeriveImage
is only useful on surfaces backed with contiguous planes.
Implementation inspired from cgit.freedesktop.org/vaapi/intel-driver

Signed-off-by: Julien Isorce <j.isorce@samsung.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/va: add more errors checks in vlVaBufferSetNumElements and vlVaMapBuffer

Signed-off-by: Julien Isorce <j.isorce@samsung.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/va: add headless support, i.e. VA_DISPLAY_DRM

This patch allows to use gallium vaapi without requiring
a X server running for your second graphic card.

Signed-off-by: Julien Isorce <j.isorce@samsung.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/va: handle Video Post Processing for configs

Add support for VA_PROFILE_NONE and VAEntrypointVideoProc
in the 4 following functions:

vlVaQueryConfigProfiles
vlVaQueryConfigEntrypoints
vlVaCreateConfig
vlVaQueryConfigAttributes

Signed-off-by: Julien Isorce <j.isorce@samsung.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/va: add colospace conversion through Video Post Processing

Add support for VPP in the following functions:
vlVaCreateContext
vlVaDestroyContext
vlVaBeginPicture
vlVaRenderPicture
vlVaEndPicture

Add support for VAProcFilterNone in:
vlVaQueryVideoProcFilters
vlVaQueryVideoProcFilterCaps
vlVaQueryVideoProcPipelineCaps

Add handleVAProcPipelineParameterBufferType helper.

One application is:
VASurfaceNV12 -> gstvaapipostproc -> VASurfaceRGBA

Signed-off-by: Julien Isorce <j.isorce@samsung.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/va: implement dmabuf import for VaCreateSurfaces2

For now it is limited to RGBA, BGRA, RGBX, BGRX surfaces.

Signed-off-by: Julien Isorce <j.isorce@samsung.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/va: implement VaCreateSurfaces2 and VaQuerySurfaceAttributes

Inspired from http://cgit.freedesktop.org/vaapi/intel-driver/
especially src/i965_drv_video.c::i965_CreateSurfaces2.

This patch is mainly to support gstreamer-vaapi and tools that uses
this newer libva API. The first advantage of using VaCreateSurfaces2
over existing VaCreateSurfaces, is that it is possible to select which
the pixel format for the surface. Indeed with the simple VaCreateSurfaces
function it is only possible to create a NV12 surface. It can be useful
to create a RGBA surface to use with video post processing.

The avaible pixel formats can be query with VaQuerySurfaceAttributes.

Signed-off-by: Julien Isorce <j.isorce@samsung.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/va: do not destroy old buffer when new one failed

If formats are not the same vlVaPutImage re-creates the video
buffer with the right format. But if the creation of this new
video buffer fails then the surface looses its current buffer.
Let's just destroy the previous buffer on success.

Signed-off-by: Julien Isorce <j.isorce@samsung.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/va: properly defines VAImageFormat formats and improve VaCreateImage

Added PIPE_VIDEO_CHROMA_FORMAT_NONE in p_format.h
and return it by default in ChromaToPipe.

Renamed YCbCrToPipe to VaFourccToPipeFormat because it now
contains RGB.

Implemented PipeFormatToVaFourcc which will be used later in
VlVaDeriveImage.

Note that gstreamer-vaapi check all the VAImageFormat fields.

Signed-off-by: Julien Isorce <j.isorce@samsung.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

main: fix basename match's check if it's an array or struct

Commit 4565b6f did not update the basename match's check for
the case that string would exactly match the name of the
variable if the suffix "[0]" were appended to it.

Fixes two dEQP-GLES31 tests:

dEQP-GLES31.functional.program_interface_query.shader_storage_block.resource_list.block_array
dEQP-GLES31.functional.program_interface_query.shader_storage_block.resource_list.block_array_single_element

v2:
- Change the position of rname_has_array_index_zero to avoid an out-of-bounds
  read. Reported by Tapani Pälli.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

i965: Fix invalid memory accesses after resizing brw_codegen's store table

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>

i965/sched: use liveness analysis for computing register pressure

Previously, we were using some heuristics to try and detect when a write
was about to begin a live range, or when a read was about to end a live
range. We never used the liveness analysis information used by the
register allocator, though, which meant that the scheduler's and the
allocator's ideas of when a live range began and ended were different.
Not only did this make our estimate of the register pressure benefit of
scheduling an instruction wrong in some cases, but it was preventing us
from knowing the actual register pressure when scheduling each
instruction, which we want to have in order to switch to register
pressure scheduling only when the register pressure is too high.

This commit rewrites the register pressure tracking code to use the same
model as our register allocator currently uses. We use the results of
liveness analysis, as well as the compute_payload_ranges() function that
we split out in the last commit. This means that we compute live ranges
twice on each round through the register allocator, although we could
speed it up by only recomputing the ranges and not the live in/live out
sets after scheduling, since we only shuffle around instructions within
a single basic block when we schedule.

Shader-db results on bdw:

total instructions in shared programs: 7130187 -> 7129880 (-0.00%)
instructions in affected programs: 1744 -> 1437 (-17.60%)
helped: 1
HURT: 1

total cycles in shared programs: 172535126 -> 172473226 (-0.04%)
cycles in affected programs: 11338636 -> 11276736 (-0.55%)
helped: 876
HURT: 873

LOST:   8
GAINED: 0

v2: use regs_read() in more places.

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

i965/fs: split out calculation of payload live ranges

We'll need this for the scheduler too, since it wants to know when the
live ranges of payload registers end in order to model them in our
register pressure calculations.

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

i965: dump scheduling cycle estimates

The heuristic we're using is rather lame, since it assumes everything is
non-uniform and loops execute 10 times, but it should be enough for
measuring improvements in the scheduler that don't result in a change in
the number of instructions.

v2:
- Switch loops and cycle counts to be compatible with older shader-db.
- Make loop heuristic 10x to match with spilling code.

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

i965: always run the post-RA scheduler

Before, we would only do scheduling after register allocation if we
spilled, despite the fact that the pre-RA scheduler was only supposed to
be for register pressure and set the latencies of every instruction to
1. This meant that unless we spilled, which we rarely do, then we never
considered instruction latencies at all, and we usually never bothered
to try and hide texture fetch latency. Although a later commit removes
the setting the latency to 1 part, we still want to always run the
post-RA scheduler since it's able to take the false dependencies that
the register allocator creates into account, and it can be more
aggressive than the pre-RA scheduler since it doesn't have to worry
about register pressure at all.

Test                   master      post-ra-sched     diff       %diff
bench_OglPSBump2       396.730     402.386           5.656      +1.400%
bench_OglPSBump8       244.370     247.591           3.221      +1.300%
bench_OglPSPhong       241.117     242.002           0.885      +0.300%
bench_OglPSPom         59.555      59.725            0.170      +0.200%
bench_OglShMapPcf      86.149      102.346           16.197     +18.800%
bench_OglVSTangent     388.849     395.489           6.640      +1.700%
bench_trex             65.471      65.862            0.390      +0.500%
bench_trexoff          69.562      70.150            0.588      +0.800%
bench_heaven           25.179      25.254            0.074      +0.200%

Reviewed-by: Jason Ekstrand <jasoan.ekstrand@intel.com>

i965/sched: write-after-read dependencies are free

Although write-after-write dependencies have the same latency as
read-after-write dependencies due to how the register scoreboard works,
write-after-read dependencies aren't checked by the EU at all, so
they're purely a constraint on how the scheduler can order the
instructions.

v2: fix accumulator dependencies too.

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

i965: fix cycle estimates when there's a pipeline stall

The issue time for an instruction is how many cycles it takes to
actually put it into the pipeline. If there's a pipeline stall that
causes the instruction to be delayed, we should first take that into
account to figure out when the instruction would start executing and
*then* add the issue time. The old code had it backwards, and so we
would underestimate the total time whenever we thought there would be a
pipeline stall by up to the issue time of the instruction.

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

vc4: Allow user index buffers, to avoid slow readback for shadow IBs.

Improves low-settings openarena performance by 31.9975% +/- 0.659931%
(n=7).

nv50: mark contexts shareable, compile at creation time

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nv50: allow per-sample interpolation to be forced via rast

Uses the same technique as for nvc0 of fixups before upload, and
evicting in case of state change. Removes one source of variants kept by
st/mesa.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

i965: Add INTEL_DEBUG=nocompact to disable instruction compaction.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Add INTEL_DEBUG=hex to print the hex with the disassembly.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Print the type and writemask on null destinations.

These are often useful in debugging, and the writemask (actually
"Channel Enables") determines more than just what goes into the
destination.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Test fixed_hw_reg.file against BRW_IMMEDIATE_VALUE, not IMM.

No functional change, since they were both 3, but BRW_IMMEDIATE_VALUE is
the hardware value and IMM was the IR value -- and you can see that
BRW_IMMEDIATE_VALUE was correctly used in the context of this patch.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/vec4: Test against BRW_IMMEDIATE_VALUE, not IMM.

No functional change, since they were both 3, but BRW_IMMEDIATE_VALUE is
the hardware value and IMM was the IR value -- and you can see that
BRW_IMMEDIATE_VALUE was correctly used in the context of this patch.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/fs: Use group(4, 0) to emit an exec-size 4 MOV.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/cfg: Handle no-idom case in cfg_t::dump_domtree().

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/disasm: Remove unused _addr_mode argument from src_ia1().

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Set correct field for indirect align16 addrimm.

This has been wrong since the initial import of the i965 driver.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/vec4: Drop brw_set_default_* before popping insn state.

Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/vec4: Remove unnecessary #includes from the generator.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>

r600: enable SB for geom shaders on pre-evergreen

I've checked with piglit and one tests fails, but it fails
on evergreen as well, so will get fixed later.

Otherwise SB seems to be working fine for geom shaders on my
rv635.

Signed-off-by: Dave Airlie <airlied@redhat.com>

i965/vec4: Eliminate the vec4_generator class altogether.

We really weren't taking advantage of vec4_generator being a class.
By adding a "p" parameter to the helper methods, and "prog_data" to
ones which need binding table information, we can convert everything
to static functions.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965/vec4: Move vec4_generator class definition into the .cpp file.

The public API for the generator is brw_vec4_generate_code(); nobody
actually needs to use the class.  This means we can extend it without
triggering the recompiles associated with altering brw_vec4.h.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965/vec4: Wrap vec4_generator in a C function.

vec4_generator is a class for convenience, but only exports a single
method as its public API.  It makes much more sense to just export a
single function.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965/vec4: Convert src_reg/dst_reg to brw_reg at the end of the visitor.

This patch makes the visitor convert registers to the HW_REG file at the
very end, after register allocation, post-RA scheduling, and dependency
control flagging.  After that, everything is in fixed brw_regs.

This simplifies the code generator, as it can just use the hardware
registers rather than having to interpret our abstract files.  In
particular, interpreting the UNIFORM file meant reading prog_data
to figure out where push constants are supposed to start.

Having the part of the code that performs register allocation also
translate everything to hardware registers seems sensible.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>

r600g: Fix special negative immediate constants when using ABS modifier.

Some constants (like 1.0 and 0.5) could be inlined as immediate inputs
without using their literal value. The r600_bytecode_special_constants()
function emulates the negative of these constants by using NEG modifier.

However some shaders define -1.0 constant and want to use it as 1.0.
They do so by using ABS modifier. But r600_bytecode_special_constants()
set NEG in addition to ABS. Since NEG modifier have priority over ABS one,
we get -|1.0| as result, instead of |1.0|.

The patch simply prevents the additional switching of NEG when ABS is set.

[According to Ivan Kalvachev, this bug was fond via
https://github.com/iXit/Mesa-3D/issues/126 and
https://github.com/iXit/Mesa-3D/issues/127]

Signed-off-by: Ivan Kalvachev <ikalvachev@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
CC: <mesa-stable@lists.freedesktop.org>

st/mesa: fix mipmap generation for immutable textures with incomplete pyramids

Without the clamping by NumLevels, the state tracker would reallocate the
texture storage (incorrect) and even fail to copy the base level image
after reallocation, leading to the graphical glitch of
https://bugs.freedesktop.org/show_bug.cgi?id=91993 .

A piglit test has been submitted for review as well (subtest of
arb_texture_storage-texture-storage).

v2: also bypass all calls to st_finalize_texture (suggested by Marek Olšák)

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: Enable ASTC in GLES' [NUM_]COMPRESSED_TEXTURE_FORMATS queries

In OpenGL ES, the COMPRESSED_TEXTURE_FORMATS query returns the set of
supported specific compressed formats. Since ASTC formats fit within
that category, include them in the set and update the
NUM_COMPRESSED_TEXTURE_FORMATS query as well.

This enables GLES2-based ASTC dEQP tests to run. See the Bugzilla for
more info.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92193
Reported-by: Tapani Pälli <tapani.palli@intel.com>
Suggested-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa/texcompress: Restrict FXT1 format to desktop GL subset

In agreement with the extension spec and commit
dd0eb004874645135b9aaac3ebbd0aaf274079ea, filter FXT1 formats to the
desktop GL profiles. Now we no longer advertise such formats as supported
in an ES context and then throw an INVALID_ENUM error when the client
tries to use such formats with CompressedTexImage2D.

Fixes the following 26 dEQP tests:
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_invalid_border
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_invalid_border_cube_neg_x
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_invalid_border_cube_neg_y
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_invalid_border_cube_neg_z
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_invalid_border_cube_pos_x
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_invalid_border_cube_pos_y
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_invalid_border_cube_pos_z
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_invalid_size
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_level_max_cube_pos
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_level_max_tex2d
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_neg_level_cube
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_neg_level_tex2d
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_neg_width_height_cube_neg_x
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_neg_width_height_cube_neg_y
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_neg_width_height_cube_neg_z
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_neg_width_height_cube_pos_x
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_neg_width_height_cube_pos_y
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_neg_width_height_cube_pos_z
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_neg_width_height_tex2d
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_width_height_max_cube_neg_x
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_width_height_max_cube_neg_y
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_width_height_max_cube_neg_z
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_width_height_max_cube_pos_x
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_width_height_max_cube_pos_y
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_width_height_max_cube_pos_z
* dEQP-GLES2.functional.negative_api.texture.compressedteximage2d_width_height_max_tex2d

v2. Use _mesa_is_desktop_gl() (Ilia, Ian)

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>

nvc0: expose a group of performance metrics on Fermi

This allows to monitor those performance metrics through
GL_AMD_performance_monitor.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

st/mesa: create temporary textures with the same nr_samples as source

Not sure if this is actually reachable in practice (to have a complex
copy with MS textures).

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

glsl: add fragdata arrays to program resource list

This makes sure that user is still able to query properties about
variables that have gotten removed by opt_dead_builtin_varyings pass.

Fixes following OpenGL ES 3.1 test:
   ES31-CTS.program_interface_query.output-layout

No Piglit regressions.

v2: cleanup, drop extra parenthesis (Topi)

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Marta Lofstedt <marta.lofstedt@intel.com>

mesa: add fragdata_arrays list to gl_shader

This is required to store information about fragdata arrays, currently
these variables get lost and cannot be retrieved later in sensible way
for program interface queries. List will be utilized by next patch.

Patch also modifies opt_dead_builtin_varyings pass to build list when
lowering fragdata arrays. This is identical approach as taken with
packed varyings pass.

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Marta Lofstedt <marta.lofstedt@intel.com>

glsl: fix GL_BUFFER_DATA_SIZE value for shader storage blocks with unsize arrays

From ARB_program_interface_query:

"For the property of BUFFER_DATA_SIZE, then the implementation-dependent
 minimum total buffer object size, in basic machine units, required to hold
 all active variables associated with an active uniform block, shader
 storage block, or atomic counter buffer is written to <params>.  If the
 final member of an active shader storage block is array with no declared
 size, the minimum buffer size is computed assuming the array was declared
 as an array with one element."

Fixes the following dEQP-GLES31 tests:

dEQP-GLES31.functional.program_interface_query.shader_storage_block.buffer_data_size.named_block
dEQP-GLES31.functional.program_interface_query.shader_storage_block.buffer_data_size.unnamed_block
dEQP-GLES31.functional.program_interface_query.shader_storage_block.buffer_data_size.block_array

v2:
- Fix comment's indentation and explain that the parser already
  checked that unsized array is in last element of a shader
  storage block (Iago).
- Add assert (Iago).

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>

docs: Mark GL_ARB_fragment_layer_viewport as done on i965.

i965: Implement ARB_fragment_layer_viewport.

Normally, we could read gl_Layer from bits 26:16 of R0.0.  However, the
specification requires that bogus out-of-range 32-bit values written by
previous stages need to appear in the fragment shader as-written.

Instead, we pass in the full 32-bit value from the VUE header as an
extra flat-shaded varying.  We have the SF override the value to 0
when the previous stage didn't actually write a value (it's actually
defined to return 0).

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>

i965: Make calculate_attr_overrides return the URB read offset.

Traditionally, we've hardcoded "URB Entry Read Offset" to 1 (which
represents 2 vec4 varying slots) to skip over the 8 DWord VUE header.

In order to support ARB_fragment_layer_viewport, we'll need to read
from that header.  This patch adds the basic plumbing necessary to
calculate a value dynamically and hook it up in the SBE packets.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>