Bernd Kuhls [Wed, 20 May 2015 08:26:33 +0000 (10:26 +0200)]
package/dovecot-pigeonhole: bump version to 0.4.8
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Wed, 20 May 2015 08:26:32 +0000 (10:26 +0200)]
package/dovecot: bump version to 2.2.18
Removed patch applied upstream:
http://hg.dovecot.org/dovecot-2.2/rev/
e4ad83ed88c9
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Sat, 11 Apr 2015 09:57:37 +0000 (11:57 +0200)]
package/lame: Fix compile on 32bit Intel
In file included from xmm_quantize_sub.c:37:0:
/home/br/br5/output/host/usr/lib/gcc/i586-buildroot-linux-uclibc/4.9.2/include/xmmintrin.h:929:1: error: inlining failed in call to always_inline '_mm_loadu_ps': target specific option mismatch
_mm_loadu_ps (float const *__P)
^
xmm_quantize_sub.c:65:18: error: called from here
const __m128 vec_fabs_mask = _mm_loadu_ps(&fabs_mask._float[0]);
^
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Sat, 11 Apr 2015 09:57:36 +0000 (11:57 +0200)]
package/lame: Fix autoreconf
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Colleen [Tue, 19 May 2015 16:07:58 +0000 (16:07 +0000)]
1/1] package/linux-firmware: add iwlwifi 6000g2a firmware
Signed-off-by: Colleen Twitty <colleen@skycatch.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Jörg Krause [Sun, 29 Mar 2015 16:10:46 +0000 (18:10 +0200)]
boot/uboot: add support for i.MX28 NAND format
Allow to generate 'u-boot.nand', Freescale i.MX28 BootStream format (.sb)
with a header for booting from NAND flash.
There are two possibilities when preparing an image writable to NAND flash:
1) The NAND was not written at all yet or the BCB (Boot Control Blocks) is
broken. In this case, the NAND image 'u-boot.nand' needs to written.
2) The NAND flash was already written with a good BCB. This applies after
'u-boot.nand' was correctly written. There is no need to write the BCB
again. In this case, the bootloader can be upgraded by writing 'u-boot.sb'.
To satisfy both cases 'u-boot.nand' as well as the make target 'u-boot.sb' are
copied to the binaries directory.
mxsboot for NAND images needs all three parameters typed in as integer values
(hex values do not work). The default values choosen are typical sizes for a
NAND flash.
For more information see:
http://www.denx-cs.de/doku/?q=m28evkrunuboot
Commit Note: This patch is based on top of
"[PATCH v2 1/2] boot/uboot: add support for i.MX28 SD format"
http://patchwork.ozlabs.org/patch/453116/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Tue, 26 May 2015 08:19:42 +0000 (10:19 +0200)]
qmx6_defconfig: bump version to 3.10.53_1.1.0
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Tue, 26 May 2015 08:19:41 +0000 (10:19 +0200)]
freescale_imx6*_defconfig: bump version to 3.10.53-1.1.0 GA
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Tue, 26 May 2015 08:19:40 +0000 (10:19 +0200)]
board/boundarydevices: rework and update u-boot scripts
Those scripts are executed by u-boot in order to detect the hardware
configuration (board, displays etc...), configure the bootargs and
device tree accordingly or update the bootloader located in NOR flash.
This update is necessary due to the kernel bump to version 3.10.53.
The rework consists of replacing the binaries by their text file
equivalent and generate the binaries from the post-build.sh script.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Tue, 26 May 2015 08:19:39 +0000 (10:19 +0200)]
nitrogen6x_defconfig: bump version to 3.10.53_1.1.1_ga
Also update the dtb files to be generated.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Tue, 26 May 2015 08:19:38 +0000 (10:19 +0200)]
xdriver_xf86-video-imx-viv: bump to version 3.10.53-1.1.0 GA
Previous patch for the LoadExtension call isn't needed any more.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/
f0440193ddb3eafa1b00aed294ed6dbd3e4d604d
Switched back to use FREESCALE_IMX_VERSION.
The following xorg.conf was used in order to force the use of the
vivante module:
https://github.com/Freescale/meta-fsl-arm/blob/master/recipes-graphics/xorg-xserver/xserver-xf86-config/mx6/xorg.conf
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Tue, 26 May 2015 08:19:37 +0000 (10:19 +0200)]
gpu-viv-bin-mx6q: rename package to imx-gpu-viv
In order to be in line with new Freescale naming convention:
https://github.com/Freescale/meta-fsl-arm/commit/
74c86aa9
"Graphics recipe is renamed from gpu-viv-bin-mx6q to imx-gpu-viv"
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Antoine Tenart [Tue, 26 May 2015 08:19:36 +0000 (10:19 +0200)]
gpu-viv-bin-mx6q: bump to 5.0.11.p4.1
Bump the Vivante drivers to 5.0.11.p4.1. The version scheme has changed
and 5.0.11.p4.1 is indeed the latest version.
In addition to the version bump, other changes are done to handle the
new directory organisation.
The work behind this commit was funded by ECA Group
<http://www.ecagroup.com>. ECA Group is the copyright owner of the
contributed code.
Changelog:
- Package version is changed to use Vivante version
- imx-gpu-viv includes separate sub packages for demos and tools
to support flexible package additions
- Graphics package is reorganized to improve library layout
- New GPU tool apitrace is added - supported only for X11 backend (not
supported yet)
- gpu-viv-g2d shares same package with imx-gpu-viv (not supported yet)
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/
74c86aa9639f6f20991ab64ea75177a017f8749a
[Gary:
1- used the pkgconfig files provided in the package from now on
2- extend the commit log
3 - add a symlink for libGAL_egl.so as it wasn't working on X
- had to do a fixup as for some reason the lib is called libGAL_egl.dri.so
Without that last symlink change, the tutorial examples were
missing some symbols and qtbase wouldn't build.
This package has been tested with both X11 and Framebuffer backends;
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7 ]
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Tue, 26 May 2015 08:19:35 +0000 (10:19 +0200)]
freescale-imx: bump to 3.10.53-1.1.0 GA release
This version now only applies to imx-lib and firmware-imx. All other
Freescale packages have their own version from now on.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/
80ad0f2e5447c1fef976ff9a494d39f78b0eb6d1
https://github.com/Freescale/meta-fsl-arm/commit/
b12d193092484c02d7ccf2e6d98c4887aa41b408
Those packages have been implicitely tested through gstreamer as the plugins
rely on them for vpu decoding for instance:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Tue, 26 May 2015 08:19:34 +0000 (10:19 +0200)]
imx-vpu: bump version to 5.4.27
- imx-vpu version changed to internal version
- VPU share memory file open fixes
- Upgrade ion usage
- Remove obey-variables patch -now included in release
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/
db343da3e4eb2afa6a72f7526751bb8d8ba287e1
The IOGetVirtMem return value patch has now been included into the upstream
package.
This package has been implicitely tested through gstreamer as the plugins
rely on it for vpu decoding:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Tue, 26 May 2015 08:19:33 +0000 (10:19 +0200)]
gst-fsl-plugins: bump version to 4.0.2
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/
730b7ca5d2f13083f4e44636308a2f55a8d346f2
This package has been tested using the following commands:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-0.10 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! vpudec ! autovideosink
# gst-launch-0.10 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! vpudec ! mfw_isink
# gst-launch-0.10 imxv4l2src ! autovideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Tue, 26 May 2015 08:19:32 +0000 (10:19 +0200)]
libfslparser: bump version to 4.0.2
New feature for 4.0.2 version:
* Enhanced Metadata supporting in MP4, MKV, AVI, ASF parser.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/
550fb2de655f3bdbb057c41b55328b0ce2919bb9
This package has been implicitely tested through gstreamer as the 0.10 plugin
relies on it:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Tue, 26 May 2015 08:19:31 +0000 (10:19 +0200)]
libfslcodec: bump version to 4.0.2
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/
1a564bcf14c49356667dd91f90f07891cf2f9064
This package has been implicitely tested through gstreamer as the 0.10 plugin
relies on it:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gary Bisson [Tue, 26 May 2015 08:19:30 +0000 (10:19 +0200)]
libfslvpuwrap: bump version to 1.0.57
New feature for 1.0.57 version:
* Add workaround for rmvb decode timeout issue when no enough frame buffer.
* Re-enable the detection of resolution change due to the latest firmware.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/
b1edff7ec98fec1c969f6f2736a79d38aee75580
The previous patch applied can now be removed since it has been integrated
in ver 1.0.51 (see Changelog).
This package has been implicitely tested through gstreamer as the plugins
rely on it for vpu decoding:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Max Filippov [Tue, 26 May 2015 08:24:00 +0000 (11:24 +0300)]
binutils: fix xtensa gas segfault with --text-section-literals
Building libgcc with TARGET_ABI flags results in assembler segfault on
xtensa, because code in sections .init and .fini emits literals w/o
.literal_position directive. This patch turns the segfault into assembly
error.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Johan Oudinet [Wed, 8 Jul 2015 09:54:24 +0000 (11:54 +0200)]
erlang-p1-yaml: bump to version
e1f081e
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Johan Oudinet [Wed, 8 Jul 2015 09:54:23 +0000 (11:54 +0200)]
erlang-p1-sip: bump to version
fd3e461
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Johan Oudinet [Wed, 8 Jul 2015 09:54:22 +0000 (11:54 +0200)]
erlang-p1-stun: bump to version
a3dce07
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Johan Oudinet [Wed, 8 Jul 2015 09:54:21 +0000 (11:54 +0200)]
erlang-p1-xml: bump to version
2c61083
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Johan Oudinet [Wed, 8 Jul 2015 09:54:20 +0000 (11:54 +0200)]
erlang-p1-stringprep: bump to version
3c64023
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Johan Oudinet [Wed, 8 Jul 2015 09:54:19 +0000 (11:54 +0200)]
erlang-p1-tls: bump to version
b070004
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Johan Oudinet [Wed, 8 Jul 2015 09:54:18 +0000 (11:54 +0200)]
erlang-p1-cache-tab: bump to version
f7ea12b
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Johan Oudinet [Wed, 8 Jul 2015 09:54:17 +0000 (11:54 +0200)]
erlang-p1-utils: bump to version
1bf99f9
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Johan Oudinet [Wed, 8 Jul 2015 09:54:16 +0000 (11:54 +0200)]
ejabberd: fix package version
The configure tries to guess the version from the last git tag, which
is incorrect here as we are not inside ejabberd git repository.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Johan Oudinet [Wed, 8 Jul 2015 09:54:14 +0000 (11:54 +0200)]
ejabberd: bump to version 15.06
Adapt patches accordingly and add a dependency to getent.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Jörg Krause [Tue, 26 May 2015 10:38:09 +0000 (12:38 +0200)]
package/mtd: add patch to fix host build error with gcc 5.1
host-mtd build fails with gcc 5.1:
error: redefinition of ‘hashtable_iterator_key’
error: redefinition of ‘hashtable_iterator_value’
Indeed, both functions are defined twice - once in the header and once in the
source file. This is permitted in C11 (and maybe in C99).
Add a patch sent to upstream:
https://patchwork.ozlabs.org/patch/467254/
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Tested-by: Doug Kehn <rdkehn@yahoo.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Baruch Siach [Tue, 9 Jun 2015 14:20:09 +0000 (17:20 +0300)]
libxmlrpc: fix static build
Fixes:
http://autobuild.buildroot.net/results/16d/
16de14ace7b4e089f56b9cb173542e487cae3a9d/
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Marc-André Chénier [Thu, 9 Jul 2015 00:25:23 +0000 (20:25 -0400)]
package/linux-firmware: add missing nvs file for the wl18xx firmware
The wl18xx shares the same wlcore as the wl1271 and needs the
wl1271-nvs.bin file. Also, refactor some comments and list items.
Signed-off-by: Marc-Andre Chenier <mac@vrvana.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Clayton Shotwell [Fri, 10 Jul 2015 23:28:00 +0000 (18:28 -0500)]
squashfs: Add xattr support
Adding extended attribute support for the squashfs tools when the attr
package is selected. This is needed for SELinux support.
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Matt Weber [Fri, 10 Jul 2015 23:27:57 +0000 (18:27 -0500)]
rsyslog: fix config file comment style
The upstream versions of rsyslog (v8 and higher) have this commit to fix
the config file comment issue. Carry this patch here until the version
is bumped.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Floris Bos [Mon, 25 May 2015 17:20:26 +0000 (19:20 +0200)]
postgresql: init script: wait till server has started
Adds "-w" option to init script to wait till the database server
has fully started and accepts connections before continuing.
Prevents other applications that depend on PostgreSQL from
failing to start, if the database server is not ready yet.
Times out after 60 seconds by default.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Pascal de Bruijn [Thu, 28 May 2015 18:41:46 +0000 (20:41 +0200)]
nano: work around broken syntax highlighting regexes
[Thomas: use --with-wordbounds instead of fiddling with CFLAGS.]
Signed-off-by: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Tue, 7 Jul 2015 21:00:19 +0000 (23:00 +0200)]
package/mplayer: Add additional X11 dependencies
Proposed fix for https://bugs.busybox.net/show_bug.cgi?id=8206
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 10 Jul 2015 11:22:04 +0000 (08:22 -0300)]
php: security bump to version 5.6.11
Fixes:
CVE-2015-3152 - mysqlnd is vulnerable to BACKRONYM
And other security bugs with no CVE assigned yet:
Bug #69972 - Use-after-free vulnerability in
sqlite3SafetyCheckSickOrOk()
Bug # 69970 - Use-after-free vulnerability in
spl_recursive_it_move_forward_ex()
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sylvain Raybaud [Thu, 9 Jul 2015 16:21:59 +0000 (18:21 +0200)]
busybox: adjust configuration to add fancy options to the sleep applet
Set CONFIGURE_FEATURE_FANCY_SLEEP and CONFIG_FEATURE_FLOAT_SLEEP so that sleep accept floating point arguments.
This add 492 bytes to the busybox binary compiled for arm or 2748 bytes when compiled for i386.
Signed-off-by: Sylvain Raybaud <sylvain.raybaud@green-communications.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Baruch Siach [Fri, 10 Jul 2015 09:54:59 +0000 (12:54 +0300)]
bootutils: update website URL
The original homepage seems to be down. Use the sourceforge intro page
instead.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Alexey Brodkin [Tue, 26 May 2015 06:13:53 +0000 (09:13 +0300)]
qt: fix execution on ARC
Even though Qt4 could be built for ARC cores during execution
of Qt4 applications on target issues will happen.
Most notable is will be segfaults due to unaligned access to data,
especially in WebKit applications.
Both patches were submitted upstream and if they ever get accepted
they should be removed from Buildroot.
https://codereview.qt-project.org/#/c/112667
https://codereview.qt-project.org/#/c/112668
[Thomas: renumber patches.]
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 10 Jul 2015 22:38:58 +0000 (19:38 -0300)]
btrfs-progs: bump to version 4.1.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Sun, 7 Jun 2015 21:11:22 +0000 (23:11 +0200)]
package/mesa3d: Remove libGL headers/pkgconfig when OpenGL is disabled
mesa3d defaults to --enable-opengl due to its weird configure.ac:
http://git.buildroot.net/buildroot/commit/package/mesa3d/mesa3d.mk?id=
384d601d4ea2c41bb7928f756bfe88af4d38b38b
This leads to include/GL/*.h and lib/pkgconfig/gl.pc being installed to
STAGING_DIR. These files are enough for other packages to wrongly assume
that libGL.so is present, like vlc.
Fixes
http://autobuild.buildroot.net/results/e63/
e639dabfb260006acb8a204851b96f9275ce53a7/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Claveirole [Fri, 29 May 2015 16:15:11 +0000 (18:15 +0200)]
fcgiwrap: new package
Add package fcgiwrap from https://nginx.localdomain.pl/wiki/FcgiWrap
fcgiwrap is a simple server for running CGI applications over
FastCGI. It hopes to provide clean CGI support to Nginx (and other web
servers that may need it).
Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Claveirole [Fri, 29 May 2015 16:15:10 +0000 (18:15 +0200)]
libfcgi: link with libm when needed
libfcgi uses frexp() and thus should link with libm, but fails to do
so. Thus link errors with programs that use libfcgi (the bug does
appear only with uClibc, because the GNU libc provides frexp()
directly in libc.so). Modify 0003-link-against-math.patch so libfcgi
links against math, instead of programs that need it.
Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Frank Hunleth [Tue, 19 May 2015 12:01:11 +0000 (08:01 -0400)]
zeromq: depend on libsodium if available
ZeroMQ doesn't require libsodium, but will enable CURVE security if it's
available. This patch adds the optional dependency.
[Thomas: pass --without-libsodium explicitly when libsodium is not
enabled, and to achieve this, backport a patch from upstream zeromq.]
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Frank Hunleth [Tue, 19 May 2015 12:01:10 +0000 (08:01 -0400)]
libsodium: new package
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Waldemar Brodkorb [Fri, 26 Jun 2015 18:41:50 +0000 (20:41 +0200)]
enlightment: xtensa workaround no longer required
With the update to uClibc-ng 1.0.3, this is no longer needed,
as the problem is fixed upstream.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 10 Jul 2015 18:10:05 +0000 (15:10 -0300)]
linux: bump default to version 4.1.2
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 10 Jul 2015 18:10:04 +0000 (15:10 -0300)]
linux-headers: bump 3.{10, 14, 18}.x and 4.{0, 1}.x series
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 10 Jul 2015 17:40:09 +0000 (14:40 -0300)]
gettext: bump to version 0.19.5
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 10 Jul 2015 17:40:08 +0000 (14:40 -0300)]
file: bump to version 5.24
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 10 Jul 2015 17:40:07 +0000 (14:40 -0300)]
libunistring: bump to version 0.9.6
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 10 Jul 2015 17:40:06 +0000 (14:40 -0300)]
libidn: bump to version 1.31
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 10 Jul 2015 16:50:08 +0000 (13:50 -0300)]
ruby: enable parallel build
Re-enable parallel builds, it doesn't seem to be affected by the issue
worked around in
9332a1ad4 any more.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Maxim Mikityanskiy [Mon, 19 Jan 2015 16:14:08 +0000 (18:14 +0200)]
package/e2fsprogs: make /sbin/fsck available
systemd looks for fsck in /sbin, so make symlink:
/sbin/fsck -> /usr/sbin/fsck
[Thomas: add comment.]
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Fri, 10 Jul 2015 17:17:02 +0000 (19:17 +0200)]
docs/manual/beyond-buildroot: additional minor fixes
Those issues were noticed by Thomas De Schampheleire during the
review, but they were forgotten when applying the patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Noé Rubinstein [Mon, 19 Jan 2015 19:52:57 +0000 (20:52 +0100)]
docs/manual/beyond-buildroot: building and testing live-CDs
[Thomas: reworked a bit the phrasing, plus mention that Grub 2 is
supported.]
Signed-off-by: Noé Rubinstein <nrubinstein@aldebaran.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Guillaume GARDET [Tue, 18 Nov 2014 14:54:46 +0000 (15:54 +0100)]
c-icap: new package
[Thomas:
- Remove trailing whitespace everywhere
- Rewrap the Config.in help text
- Fix Config.in comment, the proper text for BR2_PREFER_STATIC_LIB is
"dynamic library", not "libdl library"
- Use a PID file in the init script
- Show OK / FAIL when stopping the service
- Remove the largefile/IPv6 handling in c-icap.mk, since they are now
mandatory. We therefore pass --enable-large-files and --enable-ipv6
unconditionally.
- Remove the reference to a non-existing
C_ICAP_INSTALL_TARGET_CONFIGS install target hook.
- Install the init script unconditionally.
- Remove unneeded example configuration files (*.default) from /etc,
and fixup the c-icap.conf so that the default values work with
Buildroot
- Properly handle the *-config scripts installed by c-icap.
- Add hash file.]
Signed-off-by: Guillaume GARDET <guillaume.gardet@oliseo.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Tue, 7 Jul 2015 12:52:32 +0000 (09:52 -0300)]
popt: add hash file
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Tue, 7 Jul 2015 12:52:31 +0000 (09:52 -0300)]
transmission: add hash file
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Tue, 7 Jul 2015 12:52:30 +0000 (09:52 -0300)]
rp-pppoe: add hash file
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Tue, 7 Jul 2015 12:52:29 +0000 (09:52 -0300)]
netstat-nat: add hash file
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fabio Porcedda [Wed, 6 May 2015 12:17:50 +0000 (14:17 +0200)]
expect: bump to version 5.45.3
Download it from the cvs repository because it is not availabe as a
downloadable file. Also because a tag isn't available use the date.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fabio Porcedda [Wed, 6 May 2015 12:17:49 +0000 (14:17 +0200)]
manual: cvs: document that a branch or a date can be used
Also instead of using the generic word "timestamp" use the word "tag".
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fabio Porcedda [Wed, 6 May 2015 12:17:48 +0000 (14:17 +0200)]
support/download/cvs: add support to use a date instead of a tag
This is useful when a tag is not avaiable.
Also fix support for Fedora where the command "cvs -r :<version>" doesn't work.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Thu, 9 Jul 2015 00:54:04 +0000 (21:54 -0300)]
qemu/configs: enable DRM+QXL for x86 and x86_64
Allows for nicer framebuffer emulation under Qemu with the QXL xorg
driver.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Thu, 9 Jul 2015 00:54:03 +0000 (21:54 -0300)]
xdriver_xf86-video-qxl: new package
Add the QEMU paravirt QXL video driver.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Alexey Brodkin [Thu, 9 Jul 2015 10:00:11 +0000 (13:00 +0300)]
quagga: disable PIE on ARC
Even though ARC gcc understands "-pie" option and attempts to generate
PIE binaries as of today PIE is not really supported for user-space
applications.
So we disable PIE detection if building for ARC.
That fixes http://autobuild.buildroot.net/results/ca0/
ca0b1e271f29d7639b6a6e895472a35e2c1d8aba
and also prevents execution of non-supported PIE binary in runtime.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Alexey Brodkin [Thu, 9 Jul 2015 09:45:26 +0000 (12:45 +0300)]
pure-ftpd: add patch that fixes build if HAVE_EXPLICIT_BZERO is defined
This patch was already merged upstream and once bumping version of that
package this patch must be removed.
See this change upstream:
https://github.com/jedisct1/pure-ftpd/commit/
2d34799585dc65c8c314a2f09a281874dd9b3d55
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Alexey Brodkin [Thu, 9 Jul 2015 09:38:51 +0000 (12:38 +0300)]
pure-ftpd: disable PIE on ARC
Even though ARC gcc understands "-pie" option and attempts to generate
PIE binaries as of today PIE is not really supported for user-space
applications.
So we disable PIE detection if building for ARC.
That first fixes http://autobuild.buildroot.net/results/57a/
57a6180809bc51f7206280533f0b9898ce4cfbb4
and also prevents execution of non-supported PIE binary in runtime.
Interesting enough reported build failure is not directly related to PIE
it looks like if PIE is enabled then successful detection of explicit_bzero()
happens erroneously.
A simple test app that mentions explicit_bzero() while built with
"-pie" gives this output:
--------------------------------->8-----------------------------
arc-linux-gcc test.c -pie
/home/abrodkin/Tools/arc/gnu/2015.06-rc1-uclibc-archs/bin/../lib/gcc/arc-snps-linux-uclibc/4.8.4/../../../../arc-snps-linux-uclibc/bin/ld: /home/abrodkin/Tools/arc/gnu/2015.06-rc1-uclibc-archs/bin/../arc-snps-linux-uclibc/sysroot/usr/lib/crt1.o: warning: unresolvable relocation against symbol `__uClibc_main' from .text section
/home/abrodkin/Tools/arc/gnu/2015.06-rc1-uclibc-archs/bin/../lib/gcc/arc-snps-linux-uclibc/4.8.4/../../../../arc-snps-linux-uclibc/bin/ld: /home/abrodkin/Tools/arc/gnu/2015.06-rc1-uclibc-archs/bin/../lib/gcc/arc-snps-linux-uclibc/4.8.4/crtbegin.o: warning: unresolvable relocation against symbol `__deregister_frame_info@@GCC_3.0' from .text section
/home/abrodkin/Tools/arc/gnu/2015.06-rc1-uclibc-archs/bin/../lib/gcc/arc-snps-linux-uclibc/4.8.4/../../../../arc-snps-linux-uclibc/bin/ld: /home/abrodkin/Tools/arc/gnu/2015.06-rc1-uclibc-archs/bin/../lib/gcc/arc-snps-linux-uclibc/4.8.4/crtbegin.o: warning: unresolvable relocation against symbol `__deregister_frame_info@@GCC_3.0' from .text section
/home/abrodkin/Tools/arc/gnu/2015.06-rc1-uclibc-archs/bin/../lib/gcc/arc-snps-linux-uclibc/4.8.4/../../../../arc-snps-linux-uclibc/bin/ld: /home/abrodkin/Tools/arc/gnu/2015.06-rc1-uclibc-archs/bin/../lib/gcc/arc-snps-linux-uclibc/4.8.4/crtbegin.o: warning: unresolvable relocation against symbol `__register_frame_info@@GCC_3.0' from .text section
--------------------------------->8-----------------------------
And what's really interesting exist status is 0!:
--------------------------------->8-----------------------------
$ echo $?
0
--------------------------------->8-----------------------------
With removal of "-pie" we're getting expected failure and exist status 1:
--------------------------------->8-----------------------------
$ arc-linux-gcc test.c
/tmp/ccaWbKwc.o: In function `main':
test.c:(.text+0x1c): undefined reference to `explicit_bzero'
collect2: error: ld returned 1 exit status
$ echo $?
1
--------------------------------->8-----------------------------
We'll look into that strange issue separately internally.
I filed internal STAR
9000925001 for that issue.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Thu, 9 Jul 2015 18:45:13 +0000 (15:45 -0300)]
openssl: security bump to version 1.0.2d
Fixes CVE-2015-1793 - Alternative chains certificate forgery.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Peter Korsgaard [Thu, 9 Jul 2015 06:55:16 +0000 (08:55 +0200)]
openssl: drop !static dependency from OPENSSL_BIN option
The dependency doesn't make sense now that the option only controls if the
built binary gets installed into the target or not, so drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Benoît Thébaudeau [Tue, 7 Jul 2015 10:37:58 +0000 (12:37 +0200)]
openssl: fix static build
If configured with no-dso, the openssl binary still gets linked with
-ldl, while libdl is not available for static-only builds. The OpenSSL
framework does not support automatically dropping -ldl with no-dso, so
-ldl has to be removed from Makefile after calling ./Configure as
explained in PROBLEMS.
Fixes http://autobuild.buildroot.org/results/
cbb35f2582f1cfeb3d11cb4952a80784ff660baf
[Peter: add reference to PROBLEMS file]
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Thu, 9 Jul 2015 06:36:29 +0000 (08:36 +0200)]
system/device_table.txt: /etc/random-seed is no more
So don't try to set the permissions of it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Danomi Manchego [Tue, 7 Jul 2015 04:34:00 +0000 (00:34 -0400)]
pkg-autotools: fix whitespace regex in libtool patch hook
The first sed line for ltmain_version attempts to match whitespace before
VERSION with [ space_character tab_character ]. The second sed line used to
make ltmain_patchlevel has only space characters in the whitespace expression,
possibly due to a smart editor automatically converting tabs to spaces. Make
these lines consistent with each other and more resilient against accidental
loss of tab characters by replacing the tabs with '\t'.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Wed, 8 Jul 2015 05:24:12 +0000 (08:24 +0300)]
system/skeleton: don't use random-seed from a read-only fs
A random-seed from a read-only filesystem is useless.
Also, drop the check for /etc/random-seed existence; it must exist after a
touch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Wed, 8 Jul 2015 05:24:11 +0000 (08:24 +0300)]
system/skeleton: remove random-seed
Seeding the entropy pool with a known seed makes more harm than good. This is
especially bad for when /etc is not on a persistent writable storage, so the
entropy pool is seeded with the same value on every boot. Just drop it.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Tue, 7 Jul 2015 13:53:59 +0000 (10:53 -0300)]
usb_modeswitch_data: bump to version
20150627
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Tue, 7 Jul 2015 13:53:58 +0000 (10:53 -0300)]
usb_modeswitch: bump to version 2.2.3
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Luca Ceresoli [Wed, 8 Jul 2015 08:15:02 +0000 (10:15 +0200)]
stm32flash: new package
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Vicente Olivert Riera [Wed, 8 Jul 2015 08:51:51 +0000 (10:51 +0200)]
lvm2: bump to version 2.02.125
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 8 Jul 2015 16:52:15 +0000 (13:52 -0300)]
bind: security bump to version 9.9.7-P1
Fixes:
CVE-2015-4620 - On servers configured to perform DNSSEC validation an
assertion failure could be triggered on answers from a specially
configured server.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Luca Ceresoli [Wed, 8 Jul 2015 10:36:13 +0000 (12:36 +0200)]
snmppp: autoreconf is not needed anymore
Tarballs of recent versions ship a configure script.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Vanya Sergeev [Wed, 27 May 2015 23:26:13 +0000 (16:26 -0700)]
c-periphery: bump version to 1.0.3
Signed-off-by: Vanya Sergeev <vsergeev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vanya Sergeev [Wed, 27 May 2015 23:26:12 +0000 (16:26 -0700)]
lua-periphery: add hash file
Signed-off-by: Vanya Sergeev <vsergeev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vanya Sergeev [Wed, 27 May 2015 23:26:11 +0000 (16:26 -0700)]
lua-periphery: bump version to 1.0.5, remove dependency on c-periphery
The new version of the lua-periphery LuaRocks package handles fetching the
c-periphery dependency, so that it no longer needs to be cloned during the
lua-periphery build process. Consequently, this removes the need for selecting
c-periphery as a package dependency in buildroot and the need for the patches
that modify lua-periphery to be built against an external c-periphery.
[Thomas:
- remove dependency from .mk file, as noticed by Baruch
- add patch to fix uClibc build]
Signed-off-by: Vanya Sergeev <vsergeev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Jörg Krause [Tue, 5 May 2015 16:24:33 +0000 (18:24 +0200)]
package/libtirpc: remove host-pkgconf dependency
configure.ac does not contain PKG_CHECK_MODULES anymore.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Tue, 7 Jul 2015 10:31:55 +0000 (07:31 -0300)]
iproute2: bump to version 4.1.1
Now with local header for tipc support on older kernels.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Sun, 7 Jun 2015 11:41:02 +0000 (13:41 +0200)]
package/mesa3d: If udev is not present, sysfs is used as a replacement
Support for sysfs as a replacement for udev was added 2014/05/30:
http://cgit.freedesktop.org/mesa/mesa/commit/configure.ac?id=
85b6f36ca5238dd3fec7c5fcacb8b7074ce53c8e
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Peter Seiderer [Mon, 6 Jul 2015 18:45:56 +0000 (20:45 +0200)]
libevdev: bump version to 1.4.3
>From [1]:
- tools: widen frequency resolution to µs in the DPI tool
- tools: complain about devices that don't have abs x/y axes in the edge detector
- include: update to 4.1 header
[1] http://lists.freedesktop.org/archives/input-tools/2015-June/001171.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Mon, 6 Jul 2015 18:06:38 +0000 (15:06 -0300)]
xtables-addons: bump to version 2.7
Fixes build issues with kernels 4.1+
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Nathaniel Roach [Mon, 6 Jul 2015 16:55:45 +0000 (00:55 +0800)]
package/bind: Enable filter-aaaa-on-v4 option
This allows usage of the filter-aaaa-on-v4 configuration option.
This option disables responding with AAAA records when the request
is made over ipv4. This may be useful on networks with
ipv6 inside, but no ISP ipv6 (when combined with only
listening on ipv4).
See https://kb.isc.org/article/AA-00576/
Filter-AAAA-option-in-BIND-9-.html
for more information.
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Danomi Manchego [Sun, 5 Jul 2015 20:53:48 +0000 (16:53 -0400)]
pkg-autotools: fix patching libtool for version 2.4
If the libtool used by the package is 2.4 (i.e. with no patchlevel), we
end up with error messages like this one, seen when building ntp-4.2.8p3:
/bin/sh: line 0: test: 2.4: integer expression expected
That's because the current sed expression "[0-9].[0-9]." only deletes content
like "2.4.", so it leaves "2.4" (no patch level *and* no second period) intact,
resulting in an ltmain_patchlevel of "2.4", not empty, and not "0". Then the
shell line goes bad, because the built in shell test -gt operates on integers
only, and fails on floating point numbers (like "2.4").
Additionally, the existing sed lines are problematic in other ways, because the
current expression "[0-9].[0-9]" will match "234" as well as "2.4", as an unescaped
period matches any character, not just a period. Also, the lack of an asterisk
after the first character may be a problem in the future, if a two digit initial
number is used.
So, this patch changes the sed regex as follows:
* Match a string of digits when searching for a number. I.e. "[0-9]*"
* Match specifically a period in between two numbers. I.e. "\."
* When searching for a patch level, make the second period optional. I.e. "\.*"
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Vicente Olivert Riera [Mon, 6 Jul 2015 15:53:35 +0000 (17:53 +0200)]
squid: explicitly disable openssl support when BR2_PACKAGE_OPENSSL != y
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Sun, 5 Jul 2015 16:49:14 +0000 (18:49 +0200)]
package/vlc: Fix SSE support with gcc5
Compile fails
make[4]: Entering directory `/home/fli4l/br6_freeswitch/output/build/vlc-2.2.1/modules'
CC video_chroma/libi420_yuy2_sse2_plugin_la-i420_yuy2.lo
In file included from video_chroma/i420_yuy2.c:35:0:
video_chroma/i420_yuy2.c: In function 'I420_UYVY_Filter':
video_chroma/i420_yuy2.c:194:23: error: calling 'I420_UYVY.isra.2' with SSE caling convention without SSE/SSE2 enabled
VIDEO_FILTER_WRAPPER( I420_UYVY )
^
../include/vlc_filter.h:266:13: note: in definition of macro 'VIDEO_FILTER_WRAPPER'
name( p_filter, p_pic, p_outpic ); \
using this defconfig
BR2_x86_pentium2=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_GCC_VERSION_5_1_X=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_VLC=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Mon, 6 Jul 2015 08:02:05 +0000 (10:02 +0200)]
squid: add gnutls support
A new --without-gnutls option has been added to configure, so let's use
it in order to enable or disable gnutls support in squid.
Related:
http://www.squid-cache.org/Versions/v3/3.5/squid-3.5.6-RELEASENOTES.html#ss4.1
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Mon, 6 Jul 2015 08:02:04 +0000 (10:02 +0200)]
squid: bump to version 3.5.6
- Bump to version 3.5.6
- Update hash file
- Change configure options according to release notes
Release notes:
http://www.squid-cache.org/Versions/v3/3.5/squid-3.5.6-RELEASENOTES.html
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Mon, 6 Jul 2015 08:02:03 +0000 (10:02 +0200)]
nano: bump to version 2.4.2
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
projects / buildroot.git / log