cpanminus: fix installation paths

perlcross seems to set the installation paths differently than perl's
Configure, so adapt the reference to these paths in cpanminus.

[Francois: install into /usr/lib/perl]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

cpanminus: requires host-qemu

It's still broken, but is someone wants to try it out then at least
the dependency is there.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

perl: fix configure step

Configure -A symbol=val generates a extra space in config.sh,
which causes failure like this :
    Building Module-Runtime-0.013
    Unknown OS type ' linux' - using default settings

[Arnout: use -A define:foo instead of patching config.sh]

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

perl: remove the double configure hack

configure had to be called twice because with --mode=cross the
miniperl-step failed.  However, just leaving out the --mode parameter
is sufficient to make it work.  Since GNU_TARGET_NAME is always
different from the host's tuple (it has -buildroot- in it), we can
safely assume that the configure script will automatically enter
cross mode.

Also fix a type in perladmin definition.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

perl: substitute perlcross pod with perl-version-specific pod

As suggested by Dan Pattison at ethertek ca.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

perl: remove redundant patches

Now we are using perlcross, the patches to make perl work with qemu are
redundant, so remove them.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Add config file for the snowball board

Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

bluez-utils: add support for the ST-Ericsson cg2900 combo controller

Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
 (with the calao_snowball_defconfig)
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Add init script files for snowball board

Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Add board files for snowball

Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ux500-firmware: new package

Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
 (with the calao_snowball_defconfig)
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

snowball-hdmiservice: new package

Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
 (on various archs and toolchains)
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gstreamer: Added option to disable plugin registry.

The plugin registry can take a while to be generated when GStreamer is
initialized. Turning it off can speed up up GStreamer application launch
times. Default behaviour is unchanged.

Signed-off-by: Tim Sheridan <tim.sheridan@imgtec.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libroxml: bump version to 2.2.1

Signed-off-by: Tristan Lelong <tristan.lelong@blunderer.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ccache: Bump version

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain-external: on ARM, show comment about the availability of Linaro toolchains

On ARM, Linaro external toolchains are only visible if the user
selects Cortex-A8 or Cortex-A9. Therefore, we add a comment that tells
the user that the Linaro toolchains are only available under those
conditions.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain-external: remove Linaro 2012.08

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain-external: add Linaro 2012.11

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package: add libmatroska package

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package: add libebml package

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package: add gd package

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Update for 2012.11-rc1

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

CHANGES: update with recent changes

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

dbus: uses fork(), requires MMU

In order to solve
http://autobuild.buildroot.org/results/34f6843137efda20626af72714c110280ec577d7/build-end.log,
this patch makes the D-Bus package as well as all the packages that
select the D-Bus package 'depends on BR2_USE_MMU'.

In addition, for the specific case of gvfs, the missing
BR2_TOOLCHAIN_HAS_THREADS dependency is added (threads are required by
D-Bus, so they are also required by gvfs which selects D-Bus).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

attr: fix static build

Fixes:

  http://autobuild.buildroot.org/results/58a3d4113172813183d43fddc1248b35bd0c4994/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

php: fix C++ link issue

The intl module is implemented in C++, but PHP fails to use g++ as the
compiler for the final link. As a workaround, tell it to link
with libstdc++.

Fixes:

  http://autobuild.buildroot.org/results/13eefdf2121fa1aea7a844bbed8b6cbce3b45996/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gsl: fix build on !i386 uClibc

uClibc pretends to implement <fenv.h> as it installs the header, but
in practice, it only implements the functions for i386. This makes gsl
unhappy as it detects fenv.h, but then cannot use the fenv functions.

Fixes:

  http://autobuild.buildroot.org/results/732cc07faeca2a9098dc5106e8f654eb1323451a/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gnutls: fix build failure due to non-existing gets in recent C libraries

Fixes:

  http://autobuild.buildroot.org/results/7414989c182f8fd5b3ac849b7897b8e15df0024f/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libatomic_ops: bump to version 7.2

The 1.2 we were using doesn't build on ARM Thumb platforms:

  http://autobuild.buildroot.org/results/94ef6be7dcb31021462e7313724217627d4b29df/build-end.log

Moreover, the 7.2 version is the one used by Debian/Ubuntu, and it has
been tested to build fine with the two packages that depend on
libatomic_ops: libdrm and pulseaudio.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

mesa3d: requires host-libxml2 and host-python to generate some files

mesa3d now generates some C files at build time (related to the OpenGL
API) from XML files. This generation process is done using Python
scripts that require the libxml2 Python module.

Patch based on the initial work of Will Wagner (Thanks Will).

Signed-off-by: Vellemans Noel <noel.vellemans@visionbms.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libxml2: add support for building host library with python support

Patch based on the initial work of Will Wagner (Thanks Will).
libxml2 host library with python support is required to build mesa3d (7.10.1)

Signed-off-by: Vellemans Noel <noel.vellemans@visionbms.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

python: use default configure commands to get shared build

Commit 3c90f754961c6d99059c0b6d0a66bc797a3c017b made Python use a
special ./configure command in order to avoid --enable-shared
--disable-static being passed, because it was causing issues when
building certain modules for a 64 bits system.

However, not having a shared libpython2.7 library for the host
prevents the libxml2 Python binding to get built.

So instead, we use the default configure command, but we add
--enable-static which is needed for Python to build correctly.

Note that we tested the build of Python on a 64 bits host as well as
the build of Python for a 64 bits target, and both went fine, with all
modules built properly.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

CHANGES: update with recent changes

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

news.html: announce dev days report / next dev days

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lua: don't be fancy when creating shared library

(Possibly) fixes #5354

The lua shared library patch was creating the shared library with
-nostdlib -lgcc for some unknown reason, which most likely is
the reason for the link issue reported in #5354.

Fix it by dropping these arguments, so gcc gets to figure out itself
what dependencies are needed.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

hiawatha: bump to version 8.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

polarssl: bump to version 1.2.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

collectd: bump to version 5.1.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Allow to run severals post build scripts instead of only one

Using severals post build scripts is usefull to share
script between severals boards/projects.

[Peter: fix trailing spaces in Config.in]
Signed-off-by: Philippe Reynes <philippe.reynes@sagemcom.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

alsa-utils: bump to version 1.0.26

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

alsa-lib: bump to version 1.0.26

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Warn the user about the usage of output/target as the root filesystem

A very common mistake done by our users is that they use
output/target/ directory as their root filesystem. Even though this is
loudly documented in our Buildroot manual, people don't read
documentation, so it is not sufficient.

This patch adds a text file named
output/target/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM which explains why
output/target isn't appropriate to use as the root filesystem. The
process is:

 * At the beginning of the build, right after the skeleton has been
   copied, support/misc/target-dir-warning.txt is copied to
   output/target/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM

 * In the filesystem images creation code, this file is removed before
   launching fakeroot, and restored right after that, so that this
   file is not present in the generated root filesystem images.

Note that the file has not been added to the default skeleton for two
reasons:

 * It would have annoying to have in our source tree a file named in
   capital letters inside system/skeleton/

 * The proposed way works even if the user uses a custom skeleton.

[Peter: fixed typo]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Juha Lumme <juha.lumme@gmail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lua-msgpack-native: fix fetch

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

mxs-bootloader: Barebox entry point symbol changed in 2012.08

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

python: uses fork(), only available on MMU platforms

Fixes
http://autobuild.buildroot.org/results/1738a8b09b04d2b2fc1de6d1ff5eb0363fed6348/build-end.log

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Mark a number of development related packages as deprecated

automake, autoconf, libtool and make on the target are basically
useless if we don't support building a toolchain on the target. Of
course, the host variant of automake, autoconf and libtool will remain
available.

[Peter: fixup to apply after perl change]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Deprecate the support for the toolchain on target

As discussed during the ELCE 2012 Buildroot Developers Meeting, we no
longer want to support the possibility of building a toolchain for the
target. None of the core developers have any use for this, it has been
known to be broken or cause problems for a long time without anyone
providing fixes for it.

In addition to this, Buildroot is inherently a cross-compilation tool,
so the usage of a native toolchain on the target is not really
useful. Many newcomers are tempted to use this possibility even though
it is clearly not the intended usage of Buildroot.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libffi: add aarch64 support from upstream

Fixes build failures like:

  http://autobuild.buildroot.org/results/6b4b4c414d366c936df480747c78272050c84293/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libffi: make blackfin patch a proper git patch

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xapp_xvidtune: bump version to 1.0.2 to fix Xmu related build failure

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xapp_xmh: bump version to 1.0.2 to fix Xmu related build failure

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xapp_xlogo: bump version to 1.0.4 to fix Xmu related build failure

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xapp_xload: bump version to 1.1.1 to fix Xmu related build failure

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xapp_xfd: bump version to 1.1.1 to fix Xmu related build failure

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xapp_xditview: bump version to 1.0.2 to fix Xmu related build failure

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xapp_xclipboard: bump to 1.1.2 to fix Xmu related build failure

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xapp_viewres: bump to 1.0.3 to fix Xmu related build failure

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xapp_twm: bump to 1.0.6 to fix Xmu related build failure

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xapp_editres: bump to 1.0.5 to fix Xmu related build failure

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xutil_util-macros: bump to version 1.17

Needed by other xapp versions bump, which themselves are needed to fix
the missing link against the Xmu library (build failures similar to
http://autobuild.buildroot.org/results/1a4f84ad76ad8c4e70bff6878fc232edf46ff8f1/build-end.log).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xlib_libXt: bump version to 1.1.3

Needed by the bump of xapp_clipboard, itself needed to avoid the
following build failure:

  http://autobuild.buildroot.org/results/1a4f84ad76ad8c4e70bff6878fc232edf46ff8f1/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

barebox: Add 2012.11, remove 2012.07

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

mysql_client: security bump to version 5.1.66

Fixes multiple security isssues, most of them of the server component
though.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gdb: not available on aarch64 for the target

Fixes

  http://autobuild.buildroot.org/results/d32a0fb1584a125cccde521a3960fb87ff7e2de6/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: minor tweaks

Minor grammatical and spelling tweaks to the manual content.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

cpanminus: mark as broken

cpanminus is currently responsible for about half of the autobuilder
failures, due to the missing dependency on host-qemu. However, even
with the host-qemu proposed by Arnout, cpanminus will still not work
properly: it will try to execute on the build machine executables
built for the target. While qemu is here to emulate the instruction
set, there is still the unsolved problem of kernel headers version
mismatch between the target and the build environments.

So the whole approach that consists in using host-qemu for building
simply cannot work properly, and until it is solved, the package
should be marked as broken.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kexec: disable on unsupported architectures

kexec only supports the following architectures.

  i?86
  powerpc
  powerpc64
  arm*
  s390x|s390
  sh4|sh4a|sh3|sh
  mips*
  cris
  crisv32
  ia64
  x86_64
  alpha

The Buildroot kexec package is available when an unsupported target
architecture is selected, leading to autobuild failures like the following.

  http://autobuild.buildroot.net/results/e706b08abb4fd1987fc4aa970d6be50fc92dc1fa/build-end.log

This patch makes the kexec package available only for the supported
architectures.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

can-utils: add CAN FD support

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: contribute.txt: do not use --summary option with 'git format-patch'

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: prerequisite.txt: add texinfo to the mandatory package list

Using the internal Buildroot toolchain backend, makeinfo, whom belongs to
the texinfo package, is required to build gcc and gdb.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain/gdb: disable support of full gdb on target for blackfin

There is no support in gdb 6.6 for the Blackfin architecture, so
disallow this choice. This fixes the following build failure:

  http://autobuild.buildroot.org/results/e37db29810265a756833da163fda444d967d7874/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libnspr: fix build with ARMv7 toolchains

Fixes the following build failure:

  http://autobuild.buildroot.org/results/d7323831372050e425a34f5104a46d8cbd6be214/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xlib_libXt: add patch to fix cross-compilation issue

Fixes the following build failure:

 http://autobuild.buildroot.org/results/2815885d589d75259508bcce4f272b8dddb3be77/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

binutils: bump 2.23 series to 2.23.1 and deprecate 2.20

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lcdproc: remove patch rejected upstream

Remove an lcdproc patch which has been rejected upstream. It has been
decided by lcdproc developer Markus Dolze that the behaviour of the
client_add_key command when handling the minus key is "intentional to
some degree."

This patch also takes the opportunity to remove the version number from the
single remaining lcdproc patch.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lcdproc: fix autobuilder failures

The lcdproc version bump to 0.5.6 has resulted in autobuilder failures such as
the following.

  http://autobuild.buildroot.org/results/9967bc20a6094e836c4c18ff2cd30edef143bb8e/build-end.log

The 0.5.6 release added a new glcd driver, which requires the freetype and zlib
libraries. This patch makes the lcdproc package depend on freetype and zlib.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: add beyond-buildroot.txt

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: add deprecated-list.txt

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: add pkg-list.txt (generated list of available packages)

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: add legal-info.txt

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: add adding-package-tips.txt

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: add patch-policy.txt

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: add download-infra.txt

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: add package-make-target.txt

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: add contribute.txt

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: add get-involved.txt

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: add writing-rules.txt

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: faq.txt: rework and update

Also rename faq.txt -> faq-troubleshooting.txt

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: add make-tips.txt

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: add prerequisite.txt

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: adding-package-directory.txt: update, cleanup and typo fixes

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: update rebuilding-packages.txt

- update "Understanding how to rebuild packages" section
- add "Understanding when a full rebuild is necessary" section

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: customize-rootfs.txt: refactoring, misc. fixes and update

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: rework using.txt and update common-usage.txt

Consider the second chapter: "starting-up", as a tutorial.
Assuming that, using.txt only contains the very first commands used to get
configure and build its very first target system.

So, the following subsection from using.txt have been to common-usage.txt:
- Offline builds
- Building out-of-tree
- Environment variables

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: rework introduction.txt and add embedded-basics.txt

Split and rephrasing of introduction.txt.

Cross-toolchain explainations moved from introduction.txt into
embedded-basics.txt.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: rework the whole documentation stub

The new skeleton of the manual as it has been thought:
1.  About Buildroot:
     Presentation of Buildroot
2.  Starting up:
     Everything to quickly and easily start working with Buildroot
3.  Working with Buildroot
     Basics to make your work fitting your needs
4.  Troubleshooting
5.  Going further in Buildroot's innards
     Explaination of how buildroot is organised, how it works, etc
6.  Developer Guidelines
7.  Getting involved
8.  Contibuting to Buildroot
9.  Legal notice
10. Appendix

It is easy to distinguish two parts in this plan:
- Sections 1 to 4 mainly address people starting with Buildroot
- Sections 5 to 10 are more focused on how to develop Buildroot itself

Most of the existing sections have just been moved in the hierarchy,
few were split and dispatch in, what i think was the relevant section,
and numerous others have been created.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: set toc depth to 4 for html outputs

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: make clean target consistent with others in buildroot

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qemu/mips64-malta: update to use kernel 3.6.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qemu/mips{el}-malta: update to use kernel 3.6.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>