daily update

2003-03-18  H.J. Lu  <hongjiu.lu@intel.com>

* targets.c (_bfd_target_vector): Add bfd_efi_app_x86_64_vec
only if BFD64 is defined.

gas/
* config/tc-arm.c (do_mul): Don't warn about overlapping
Rd and Rm operands when assembling for v6 or above.
Correctly capitalize register names in the messages.
(do_mlas): Likewise.  Delete spurious blank line.

gas/testsuite/
* gas/arm/mul-overlap.s: New.
* gas/arm/mul-overlap.d: New.
* gas/arm/mul-overlap.l: New.
* gas/arm/mul-overlap-v6.s: New.
* gas/arm/mul-overlap-v6.d: New.

Correct attribution

*** empty log message ***

daily update

* elf32-spu.c (spu_elf_size_stubs): Always use an overlay stub
on setjmp calls.

*** empty log message ***

daily update

* config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.

* lib/gdb.exp (gdb_run_cmd): Use -notransfer to make start-up
messages available to test cases (like chng-sym.exp).

Use pc-relative relocation instead of an absolute relocation for x86_64-pc-mingw32 target.

daily update

* cp-demangle.c (d_encoding): Exit early on error.
(d_pointer_to_member_type): Exit early if cplus_demangle_type
returns NULL.
(cplus_demangle_type): Likewise.
* testsuite/demangle-expected: New testcase.

*** empty log message ***

gas/

2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (md_begin): Use i386_regtab_size to scan
i386_regtab.
(parse_register): Use i386_regtab_size instead of ARRAY_SIZE
on i386_regtab.

opcodes/

2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>

* i386-opc.c: Include "libiberty.h".
(i386_regtab): Remove the last entry.
(i386_regtab_size): New.
(i386_float_regtab_size): Likewise.

* i386-opc.h (i386_regtab_size): New.
(i386_float_regtab_size): Likewise.

2007-03-15  Alexandre Oliva  <aoliva@redhat.com>

PR gas/4184
* app.c (do_scrub_chars): PUT after setting states.

gas/

2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerated.

* config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
"opcode/i386.h".
(md_begin): Check reg_name != NULL for the last entry in
i386_regtab.

* config/tc-i386.h: Move many entries to opcode/i386.h and
opcodes/i386-opc.h.

* configure.in (need_opcodes): Set true for i386.
* configure: Regenerated.

include/opcode/

2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>

* i386.h: Add entries from config/tc-i386.h and move tables
to opcodes/i386-opc.h.

opcodes/

2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am (CFILES): Add i386-opc.c.
(ALL_MACHINES): Add i386-opc.lo.
Run "make dep-am".
* Makefile.in: Regenerated.

* configure.in: Add i386-opc.lo for bfd_i386_arch.
* configure: Regenerated.

* i386-dis.c: Include "opcode/i386.h".
(MAXLEN): Renamed to MAX_MNEM_SIZE. Remove definition.
(FWAIT_OPCODE): Remove definition.
(UNIXWARE_COMPAT): Renamed to SYSV386_COMPAT. Remove definition.
(MAX_OPERANDS): Remove definition.

* i386-opc.c: New file.
* i386-opc.h: Likewise.

2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>

* doc/Makefile.in: Regenerated.

2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.in: Regenerated.

bfd/

2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am (bfdver.h): Substitute report_bugs_to.  Also
create doc/bfdver.texi.
* Makefile.in: Regenerated.

* configure.in (--with-bugurl): New option.
* configure: Regenerated.

* version.h (REPORT_BUGS_TO): New.

binutils/

2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am (REPORT_BUGS_TO): Removed.
(INCLUDES): Remove -DREPORT_BUGS_TO.
* Makefile.in: Regenerated.

* bucomm.c: Don't include bfdver.h.
* objdump.c: Likewise.
* version.c: Likewise.

* bucomm.h: Include bfdver.h.

* configure.in (--with-bugurl): Removed.
* configure: Regenerated.

* doc/Makefile.am (binutils_TEXINFOS): Removed.
(AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
(TEXI2DVI): Likewise.
(config.texi): Removed.
(MOSTLYCLEANFILES): Remove config.texi.
* doc/Makefile.in: Regenerated.

* doc/binutils.texi: Include bfdver.texi instead of
config.texi.

gas/

2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am (REPORT_BUGS_TO): Removed.
(INCLUDES): Remove -DREPORT_BUGS_TO.
* Makefile.in: Regenerated.

* configure.in (--with-bugurl): Removed.
* configure: Regenerated.

* doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
(AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
(TEXI2DVI): Likewise.
(gasver.texi): Removed.
(MOSTLYCLEANFILES): Remove gasver.texi.
(as.1): Don't depend on gasver.texi.
* doc/Makefile.in: Regenerated.

* doc/as.texi: Include bfdver.texi instead of gasver.texi.

gprof/

2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am (REPORT_BUGS_TO): Removed.
(INCLUDES): Remove -DREPORT_BUGS_TO.
* Makefile.in: Regenerated.

* configure.in (--with-bugurl): Removed.
* configure: Regenerated.

ld/

2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am (ld_TEXINFOS): Remove ldver.texi.
(AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
(TEXI2DVI): Likewise.
(REPORT_BUGS_TO): Removed.
(INCLUDES): Remove -DREPORT_BUGS_TO.
(ldver.texi): Likewise.
(ld.1): Don't depend on ldver.texi.
(MOSTLYCLEANFILES): Remove ldver.texi.
* Makefile.in: Regenerated.

* configure.in (--with-bugurl): Removed.
* configure: Regenerated.

* lexsup.c: Include bfdver.h.

* ld.texinfo: Include bfdver.texi instead of ldver.texi.

gas/
* config/tc-arm.c (arm_copy_symbol_attributes): New.
* config/tc-arm.h (arm_copy_symbol_attributes): Declare.
(TC_COPY_SYMBOL_ATTRIBUTES): Define.
* gas/symbols.c (copy_symbol_attributes): Use
TC_COPY_SYMBOL_ATTRIBUTES.

gas/testsuite/
* gas/arm/thumbver.d, gas/arm/thumbver.s: New test.

*** empty log message ***

daily update

2007-03-14  Paul Brook  <paul@codesourcery.com>

gas/
* config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.

gas/testsuite/
* gas/arm/thumb2_add.d: Add tests using sp.
* gas/arm/thumb2_add.s: Ditto.

* gdb.arch/altivec-regs.exp (decimal_vector): Adjust for output
format changes.

* gas/all/gas.exp: Run relax.

PR 4029
* gas/all/relax.s: New.
* gas/all/relax.d: New.
* gas/all/gas.exp: Run it.

PR 4029
* write.c (relax_segment): Insert extra alignment padding
to break infinite relax loop when given impossible
gcc_except_table assembly.

2007-03-13  H.J. Lu  <hongjiu.lu@intel.com>

* i386.h (FloatDR): Removed.
(i386_optab): Use FloatD and FloatD|FloatR instead of FloatDR.

2007-03-13  H.J. Lu  <hongjiu.lu@intel.com>

PR binutils/3826
* elf-bfd.h (elf_backend_data): Add elf_osabi.
(_bfd_elf_set_osabi): New.

* elf.c (_bfd_elf_set_osabi): New.

* elf32-hppa.c (elf32_hppa_post_process_headers): Removed.
(elf_backend_post_process_headers): Defined with
_bfd_elf_set_osabi.
(ELF_OSABI): Properly defined for each target.

* elf32-i370.c (i370_elf_post_process_headers): Removed.
(ELF_OSABI): Defined.
(elf_backend_post_process_headers): Defined with
_bfd_elf_set_osabi.

* elf32-i386.c (ELF_OSABI): Defined to ELFOSABI_FREEBSD for
freebsd.
(elf_i386_post_process_headers): Set EI_OSABI with elf_osabi.

* elf32-msp430.c (elf32_msp430_post_process_headers): Removed.
(ELF_OSABI): Defined.
(elf_backend_post_process_headers): Defined with
_bfd_elf_set_osabi.

* elf64-alpha.c (ELF_OSABI): Defined to ELFOSABI_FREEBSD for
freebsd.
(elf64_alpha_fbsd_post_process_headers): Set EI_OSABI with
elf_osabi.

* elf64-hppa.c (elf64_hppa_post_process_headers): Set EI_OSABI
with elf_osabi.
(ELF_OSABI): Properly defined for each target.
(elf_backend_post_process_headers): Defined with
_bfd_elf_set_osabi for Linux.

* elf64-sparc.c (elf64_sparc_fbsd_post_process_headers): Removed.
(ELF_OSABI): Defined to ELFOSABI_FREEBSD for freebsd.
(elf_backend_post_process_headers): Defined with
_bfd_elf_set_osabi.

* elf64-x86-64.c (elf64_x86_64_fbsd_post_process_headers): Removed.
(ELF_OSABI): Defined to ELFOSABI_FREEBSD for freebsd.
(elf_backend_post_process_headers): Defined with
_bfd_elf_set_osabi.

* elfcode.h (elf_object_p): Match the ELFOSABI_NONE ELF target
with any ELF target of the compatible machine for which we do not
have a specific backend.

* elfxx-ia64.c (elfNN_hpux_post_process_headers): Set EI_OSABI
with elf_osabi.

* elfxx-target.h (ELF_OSABI): Default to ELFOSABI_NONE.
(elfNN_bed): Initialize elf_osabi with ELF_OSABI.

*** empty log message ***

daily update

* rs6000-tdep.c (rs6000_skip_prologue): Use skip_prologue_using_sal.
(rs6000_in_function_epilogue_p): Use extract_unsigned_integer.
(refine_prologue_limit): Delete.
(skip_prologue): Don't call it.  Use extract_unsigned_integer.
Assume lim_pc is set.  Correct check for incomplete prologues.
Do not skip clobbers of the frame pointer.
* symtab.c (skip_prologue_using_sal): Fail if there is only one
sal.

* gdb.arch/powerpc-prologue.c (optimized_1_marker, gdb2029_marker)
(optimized_1): New.
(main): Call optimized_1.
(gdb2029): Correct typos.  Call gdb2029_marker.
* gdb.arch/powerpc-prologue.exp: Run new test.  Use a breakpoint
for gdb2029.

* readelf.c (dump_section): Also test for SHT_REL sections when producing
  the warning about unapplied relocs.

* frame.c (frame_pop): Check to see whether there's a frame to
which we can pop first.

* MAINTAINERS (Write After Approval): Add myself.

*** empty log message ***

daily update

    * gdb.gdb/selftest.exp (do_steps_and_nexts): Match spaces as well
        as tabs.  Remove redundant test pattern.

2007-03-12  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
on i.tm.base_opcode.
(match_template): Likewise.
(process_operands): Use ~0x3 mask to match MOV_AX_DISP32.

* config/tc-i386.h (Opcode_D): New.
(Opcode_FloatR): Likewise.
(Opcode_FloatD): Likewise.
(D): Redefined.
(W): Likewise.
(FloatMF): Likewise.
(FloatR): Likewise.
(FloatD): Likewise.

2007-03-12  Brooks Moses  <brooks.moses@codesourcery.com>
* Makefile.def (fixincludes): Remove unneeded "missing" lines.
* Makefile.in: Regenerate

*** empty log message ***

daily update

* emultempl/mmixelf.em: Remove incorrect '#line' directive.

* gas/mmix/comment-1.d, gas/mmix/bspec-1.d, gas/mmix/bspec-2.d:
Adjust for change in readelf output.

*** empty log message ***

daily update

* gdb.base/long_long.exp: Accept optional symbol name in <...>
for /a format output.

*** empty log message ***

* app.c (do_scrub_chars): Recognize comments after # line "file".
* read.c (get_linefile_number): New.
(s_app_line): Accept ill-formed .linefile lines as comments.

2007-03-09  H.J. Lu  <hongjiu.lu@intel.com>

* i386-dis.c (OP_Rd): Renamed to ...
(OP_R): This.
(Rd): Updated.
(Rm): Likewise.

daily update

* infrun.c (breakpoints_failed): Remove unnecessary variable.
(handle_inferior_event): Remove unnecessary braces.
* breakpoint.c (bpstat_what): Remove wrong comment.

* gdb.base/checkpoint.exp: Rewrite 600 checkpoint test to
collect output incrementally.

* config/tc-i386.h (WORKING_DOT_WORD): Define.

* app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
* as.h (new_logical_line_flags): New.
* input-scrub.c (new_logical_line): Turned into wrapper for...
(new_logical_line_flags): this.  Handle flags.
* read.c (potable): Add linefile.  Adjust appline argument.
(s_app_file): Fake .appfiles no more.
(s_app_line): For .linefile, accept file name and flags.

* spu-tdep.c (spu_in_function_epilogue_p): New function.
(spu_gdbarch_init): Install it.

* gdb.mi/mi-var-cmd.exp: Allow value without "..." string
for -var-create lpcharacter test.
* gdb.mi/mi2-var-cmd.exp: Likewise.

* gdb.mi/mi-var-cmd.exp: Allow -var-update null_ptr test to
pass on targets where address zero is readable.

* gdb.xml/tdesc-arch.exp: Test is unsupported on target with
just a single architecture.

*** empty log message ***

* spu-linux-nat.c (spu_xfer_partial): Return -1 for unsupported
object types, not 0.

daily update

* spu-tdep.c (spu_frame_align): New function.
(spu_gdbarch_init): Install it.  Set call dummy location to ON_STACK.

* spu-tdep.c (spu_unwind_pc): Mask off interrupt enable bit.
(spu_software_single_step): Likewise.
(spu_read_pc, spu_write_pc): New functions.
(spu_gdbarch_init): Install them.

* gdb.base/callfuncs.exp (do_get_all_registers): Remove.
(fetch_all_registers): New function, uses gdb_test_multiple and
exp_continue to fetch inferior output line-by-line.
Replace all uses of do_get_all_registers by fetch_all_registers.

* gdb.base/relativedebug.exp: Skip test if gdb,nosignals is set
in target_info.

ld/testsuite/
* ld-elf/extract-symbol-1.ld (data): Explicitly set the start address
to 0.

* cli/cli-dump.c (struct callback_data): load_offset needs to
have signed long type.

duh. commit correct version of patch.

include/elf/
* v850.h (V850_OTHER_TDA_BYTE): Delete.
(V850_OTHER_SDA, V850_OTHER_ZDA, V850_OTHER_TDA): Assign bits
that don't clash with visibility bits.
bfd/
* elf32-v850.c (v850_elf_link_output_symbol_hook): Clean out
V850_OTHER_* bits.

Regenerate.

* symbols.c (symbol_relc_make_sym): Comment typo fixes.

* m32r.opc: Formatting.

* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.

regenerate

* Makefile.am (BFD64_BACKENDS): Add efi-app-x86_64.lo.
(BFD64_BACKENDS_CFILES): Add efi-app-x86_64.c.
Run "make dep-am".
* Makefile.in: Regenerate.
* po/SRC-POTFILES.in: Regenerate.

* ldlang.c (lang_size_sections_1): Correct backwards dot move
test to not trigger on overlays.  Only warn on backwards move
if non-default lma.

*** empty log message ***

daily update

binutils:
* configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
bug-reporting URL.
* doc/Makefile.am (config.texi): Define BUGURL.
* doc/binutils.texi: Use BUGURL.  Remove text about large files
and uuencoding.
* Makefile.in, configure, doc/Makefile.in: Regenerate.

gas:
* configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
bug-reporting URL.
* doc/Makefile.am (gasver.texi): Define BUGURL.
* doc/as.texinfo: Use BUGURL.
* Makefile.in, configure, doc/Makefile.in: Regenerate.

ld:
* configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
bug-reporting URL.
* Makefile.am (ldver.texi): Define BUGURL.
* ld.texinfo: Use BUGURL.
* Makefile.in, configure: Regenerate.

2007-03-07  H.J. Lu  <hongjiu.lu@intel.com>

* config.bfd (x86_64-*-freebsd*): Add bfd_efi_app_x86_64_vec.
(x86_64-*-kfreebsd*-gnu): Likewise.
(x86_64-*-netbsd*): Likewise.
(x86_64-*-openbsd*): Likewise.
(x86_64-*-linux-*): Likewise.

* configure.in: Support bfd_efi_app_x86_64_vec.
* configure: Regenerated.

* efi-app-x86_64.c: New file.

* targets.c (bfd_efi_app_x86_64_vec): New.
(_bfd_target_vector): Add bfd_efi_app_x86_64_vec.

    * mips-tdep.c (mips_insn16_frame_cache, mips_insn32_frame_sniffer):
        Revert the previous change that had some unexpected side-effects
        on mips32.
        (mips_insn16_frame_cache, mips_insn32_frame_cache): Use the proper
        function to get the address of the calling instruction.

2007-03-07  Kai Tietz   <kai.tietz@onevision.com>

* reloc.c (bfd_generic_get_relocated_section_contents): Remove
const for type reloc_howto_type.

* configure: Regenerate.

config/:
* acx.m4 (GCC_TARGET_TOOL): Expand backquotes outside
AC_MSG_RESULT.

* tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Replace
get_selected_frame by deprecated_safe_get_selected_frame.

xfail hppa

* common.h (ELF_ST_VISIBILITY): Comment typo fix.

PR 3958
bfd/
* elf-bfd.h (RELOC_FOR_GLOBAL_SYMBOL): No error on relocatable link.
(elf_discarded_section): Move..
* bfd-in.h: ..to here.
* bfd-in2.h: Regenerate.
* elflink.c (elf_link_input_bfd): Don't zap relocs against symbols
from discarded sections before relocate_section has done its job.
* reloc.c (bfd_generic_get_relocated_section_contents): Handle
relocs against symbols from discarded sections.
* elf-hppa.h (elf_hppa_howto_table): Set size.  Set dst_mask on
SECREL32.
(elf_hppa_relocate_section): Handle relocatable link after setting
sec, sym, h etc. for final link.  Squash error messages for
relocatable link.  Clear section contents for relocs against
symbols in discarded sections, and zero reloc.  Remove existing
zero r_symndx code.
* elf-m10200.c (mn10200_elf_relocate_section): Likewise.
* elf-m10300.c (mn10300_elf_relocate_section): Likewise.
* elf32-arm.c (elf32_arm_relocate_section): Likewise.
* elf32-avr.c (elf32_avr_relocate_section): Likewise.
* elf32-bfin.c (bfinfdpic_relocate_section): Likewise.
(bfin_relocate_section): Likewise.
* elf32-cr16c.c (elf32_cr16c_relocate_section): Likewise.
* elf32-cris.c (cris_elf_relocate_section): Likewise.
* elf32-crx.c (elf32_crx_relocate_section): Likewise.
* elf32-d10v.c (elf32_d10v_relocate_section): Likewise.
* elf32-fr30.c (fr30_elf_relocate_section): Likewise.
* elf32-frv.c (elf32_frv_relocate_section): Likewise.
* elf32-h8300.c (elf32_h8_relocate_section): Likewise.
* elf32-hppa.c (elf32_hppa_relocate_section): Likewise.
* elf32-i370.c (i370_elf_relocate_section): Likewise.
* elf32-i386.c (elf_i386_relocate_section): Likewise.
* elf32-i860.c (elf32_i860_relocate_section): Likewise.
* elf32-ip2k.c (ip2k_elf_relocate_section): Likewise.
* elf32-iq2000.c (iq2000_elf_relocate_section): Likewise.
* elf32-m32c.c (m32c_elf_relocate_section): Likewise.
* elf32-m32r.c (m32r_elf_relocate_section): Likewise.
* elf32-m68hc1x.c (elf32_m68hc11_check_relocs): Likewise.
* elf32-m68k.c (elf_m68k_relocate_section): Likewise.
* elf32-mcore.c (mcore_elf_relocate_section): Likewise.
* elf32-mep.c (mep_elf_relocate_section): Likewise.
* elf32-msp430.c (elf32_msp430_relocate_section): Likewise.
* elf32-mt.c (mt_elf_relocate_section): Likewise.
* elf32-openrisc.c (openrisc_elf_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_relocate_section): Likewise.
* elf32-s390.c (elf_s390_relocate_section): Likewise.
* elf32-score.c (_bfd_score_elf_relocate_section): Likewise.
* elf32-sh.c (sh_elf_relocate_section): Likewise.
* elf32-spu.c (spu_elf_relocate_section): Likewise.
* elf32-v850.c (v850_elf_relocate_section): Likewise.
* elf32-vax.c (elf_vax_relocate_section): Likewise.
* elf32-xc16x.c (elf32_xc16x_relocate_section): Likewise.
* elf32-xstormy16.c (xstormy16_elf_relocate_section): Likewise.
* elf32-xtensa.c (elf_xtensa_relocate_section): Likewise.
* elf64-alpha.c (elf64_alpha_relocate_section_r): Likewise.
(elf64_alpha_relocate_section): Likewise.
* elf64-mmix.c (mmix_elf_relocate_section): Likewise.
* elf64-ppc.c (ppc64_elf_relocate_section): Likewise.
* elf64-s390.c (elf_s390_relocate_section): Likewise.
* elf64-sh64.c (sh_elf64_relocate_section): Likewise.
* elf64-x86-64.c (elf64_x86_64_relocate_section): Likewise.
* elfxx-ia64.c (elfNN_ia64_relocate_section): Likewise.
* elfxx-mips.c (_bfd_mips_elf_relocate_section): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Likewise.

* elf32-arm.c (elf32_arm_relocate_section): Always adjust section
symbols for relocatable link.  Don't use always-zero st_value.
(elf_backend_rela_normal): Don't define.
* elf32-bfin.c (bfinfdpic_relocate_section): Use
RELOC_FOR_GLOBAL_SYMBOL.
* elf32-frv.c (elf32_frv_relocate_section): Likewise.
* elf32-d10v.c (elf32_d10v_relocate_section): Combine SEC_MERGE
section symbol adjustments with same for relocatable link.
* elf32-i386.c (elf_i386_relocate_section): Likewise.
* elf32-m68hc1x.c (m68hc11_get_relocation_value): Move..
(elf32_m68hc11_check_relocs): ..to here.
* elf32-score.c (score_elf_final_link_relocate): Remove zero
r_symndx code.
* elfxx-mips.c (mips_elf_calculate_relocation): Likewise.

ld/testsuite/
* ld-elf/linkonce1.d: New.
* ld-elf/linkonce1a.s: New.
* ld-elf/linkonce1b.s: New.
* ld-elf/linkonce2.d: New.
* ld-i386/pcrel16abs.d: New.
* ld-i386/pcrel16abs.s: New.
* ld-i386/i386.exp: Run it.

PR ld/4023
* emultempl/aix.em (..._before_allocation): Strip sysroot prefix
  from any paths being inserted into the output binary's DT_RPATH.

2007-03-06  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/4144
* ld-elf/nobits-1.d: New file.
* ld-elf/nobits-1.s: Likewise.
* ld-elf/nobits-1.t: Likewise.

PR 4144
* elf.c (assign_file_positions_for_load_sections): Don't
adjust p_memsz for !SEC_LOAD section vma modulo page size.
Instead, use the same lma based adjustment for SEC_LOAD
sections.

*** empty log message ***

daily update

merge from gcc

2007-03-06  Andreas Krebbel  <krebbel1@de.ibm.com>

* opcodes/s390-opc.c (INSTR_RRE_FR, INSTR_RRF_F0FF2, INSTR_RRF_F0FR,
INSTR_RRF_UUFF, INSTR_RRF_0UFF, INSTR_RRF_FFFU, INSTR_RRR_F0FF): New
instruction formats added.
(MASK_RRE_FR, MASK_RRF_F0FF2, MASK_RRF_F0FR, MASK_RRF_UUFF,
MASK_RRF_0UFF, MASK_RRF_FFFU, MASK_RRR_F0FF): New instruction format
masks added.
* opcodes/s390-opc.txt (lpdfr - tgxt): Decimal floating point
instructions added.
* opcodes/s390-mkopc.c (s390_opcode_cpu_val): S390_OPCODE_Z9_EC added.
(main): z9-ec cpu type option added.
* include/opcode/s390.h (s390_opcode_cpu_val): S390_OPCODE_Z9_EC added.

2007-03-06  Andreas Krebbel  <krebbel1@de.ibm.com>

* config/tc-s390.c (md_parse_option): z9-ec option added.

2007-03-06  Andreas Krebbel  <krebbel1@de.ibm.com>

* gas/s390/zarch-z9-ec.d: New file.
* gas/s390/zarch-z9-ec.s: New file.
* gas/s390/s390.exp: Run the z9-ec testcases.

2007-03-05  H.J. Lu  <hongjiu.lu@intel.com>

PR gas/3918
* lib/gas-defs.exp (gas_started): New variable. Initialized to
0.
(gas_start): Set gas_started to 1.
(gas_finish): Skip if gas_started is 0.  Reset gas_started to 0.

*** empty log message ***

Merge from gcc:

+2007-03-01  Brooks Moses  <brooks.moses@codesourcery.com>
+
+ * configure.ac: Add "--with-pdfdir" configure option,
+ which defines pdfdir variable.
+ * Makefile.def (target=fixincludes): Add install-pdf to
+ missing targets.
+ (recursive_targets): Add install-pdf target.
+ (flags_to_pass): Add pdfdir.
+ * Makefile.tpl: Add pdfdir handling, add do-install-pdf
+ target.
+ * configure: Regenerate
+ * Makefile.in: Regenerate
+
+2007-02-28  Eric Christopher  <echristo@apple.com>
+
+ Revert:
+ 2006-12-07  Mike Stump  <mrs@apple.com>
+
+ * Makefile.def (dependencies): Add dependency for
+ install-target-libssp and install-target-libgomp on
+ install-gcc.
+ * Makefile.in: Regenerate.
+
+2007-02-27  Matt Kraai  <kraai@ftbfs.org>
+
+ * configure: Regenerate.
+ * configure.ac: Move statements after variable declarations.
+