* gdbarch.c: Rebuild.
* gdbarch.sh: Remove references to gdbarch_swap.
* corelow.c (core_open): Remove obsolete comment.

sourceware.org/ml/gdb-patches/2012-10/msg00525.html

gdb/ChangeLog

        PR cli/14772
        * c-typeprint.c (c_print_type): Don't print a space for vector
        types, this is handled within the suffix.
        (c_type_print_varspec_suffix): Add a space to vector suffix

gdb/testsuite/ChangeLog

        PR cli/14772
        * gdb.base/gnu_vector.c (union_with_vector_1)
        (struct_with_vector_1): Add new struct and union for testing
        ptype.
        * gdb.base/gnu_vector.exp: Add testing of ptype on vectors, and
        structs / unions containing vectors.

oops accidentally omitted from previous delta

*** empty log message ***

Handle --enable-64-bit-bfd when setting CORE_HEADER

* configure.in: Also handle --enable-64-bit-bfd when setting
CORE_HEADER for 'i[3-7]86-*-linux-*'.

bfd:
        * elf32-arm.c (elf32_arm_print_private_bfd_data): Recognise and
        display the new ARM hard-float/soft-float ABI flags for EABI_VER5
        (elf32_arm_post_process_headers): Add the hard-float/soft-float
        ABI flag as appropriate for ET_DYN/ET_EXEC in EABI_VER5.

binutils:
        * readelf.c (decode_ARM_machine_flags): Recognise and display the
        new ARM hard-float/soft-float ABI flags for EABI_VER5. Split out
        the code for EABI_VER4 and EABI_VER5 to allow this.

elfcpp:
        * arm.h: New enum for EABI soft- and hard-float flags.

gold:
        * gold.cc (Target_arm::do_adjust_elf_header): Add the
        hard-float/soft-float ABI flag as appropriate for ET_DYN/ET_EXEC
        in EABI_VER5.

include:
        * elf/arm.h (EF_ARM_ABI_FLOAT_SOFT): New define.
        (EF_ARM_ABI_FLOAT_HARD): Likewise.

ld/testsuite:
        * ld-arm/eabi-hard-float.s: New test source.
        * ld-arm/eabi-soft-float.s: New test source.
        * ld-arm/eabi-hard-float.d: New test.
        * ld-arm/eabi-soft-float.d: New test.
        * ld-arm/eabi-soft-float-ABI4.d: New test.
        * ld-arm/eabi-soft-float-r.d: New test.
        * ld-arm/arm-elf.xp: Use the new tests.

binutils:
PR binutils/14779
* configure.in: Add checks for wchar.h and mbstate_t.
* config.in: Regenerate.
* configure: Regenerate.
* readelf.c: Conditionally include wchar.h.
(print_symbol): Conditionally use mbstate_t.

Add Linux/x86_64 core support to i[3-7]86-*-linux

* configure.in: Set CORE_HEADER to hosts/x86-64linux.h for
'i[3-7]86-*-linux-*' if x86_64-*linux is enabled.
* configure: Regenerated.

* elf64-x86-64.c (elf_x86_64_write_core_note): Replace type
'prpsinfo_t' and 'prstatus_t' with 'prpsinfo64_t' and
'prstatus64_t' respectively.

* hosts/x86-64linux.h (a8_uint64_t): New.
(user_regsx32_struct): Renamed to ...
(user_regs64_struct): This.  Replace uint64_t with a8_uint64_t.
(elf_gregx32_t): Renamed to ...
(elf_greg64_t): This.  Replace uint64_t with a8_uint64_t.
(ELF_NGREGX32): Removed.
(ELF_NGREG64): New.
(elf_gregx32_t): Removed.
(elf_greg64_t): New.
(struct prstatus64_timeval): New.
(elf_prstatusx32): Replace elf_gregsetx32_t with elf_gregset64_t.
(elf_prstatus64): New.
(elf_prpsinfo64): New.
(prstatus64_t, prpsinfo64_t): New typedef.

*** empty log message ***

gold/
* dwp.cc (usage): Add file and exit status parameters;
add --help and --version options.
(print_version): New function.
(main): Add --help and --version options.

daily update

* elf32-xgate.c(elf_xgate_howto_table): Fix src and dest mask for
R_XGATE_16

* sb.c (sb_check): Use __builtin_clzll when size_t is not the
same size as long.

binutils/
* dlltool.c (INIT_SEC_DATA): Move.
(secdata <DLLTOOL_PPC>): Use here too.
binutils/testsuite/
* binutils-all/copy-3.d: Exclude all cygwin and mingw targets,
and rs6000.
gas/
* config/tc-ppc.c (ppc_znop): Remove unused vars.
ld/
* configure.tgt (powerpcle-pe,winnt,cygwin): Add deffilep.o
and pe-dll.o.

* elf32-ppc.c (ppc_elf_howto_raw): Correct dst_mask in
R_PPC_VLE_LO16A, R_PPC_VLE_HI16A, R_PPC_VLE_HA16A,
R_PPC_VLE_SDAREL_LO16A, R_PPC_VLE_SDAREL_HI16A,
R_PPC_VLE_SDAREL_HA16A reloc howtos.

* ld-powerpc/powerpc.exp: Modify emulation option passed to ld
when little-endian.
* ld-powerpc/apuinfo-nul.rd: Update for le output.
* ld-powerpc/apuinfo.rd: Likewise.
* ld-powerpc/plt1.d: Likewise.
* ld-powerpc/relax.d: Likewise.
* ld-powerpc/relaxr.d: Likewise.
* ld-powerpc/sdadyn.d: Likewise.
* ld-powerpc/tls.d: Likewise.
* ld-powerpc/tls.g: Likewise.
* ld-powerpc/tls.t: Likewise.
* ld-powerpc/tls32.d: Likewise.
* ld-powerpc/tls32.g: Likewise.
* ld-powerpc/tls32.t: Likewise.
* ld-powerpc/tlsexe.d: Likewise.
* ld-powerpc/tlsexe.g: Likewise.
* ld-powerpc/tlsexe.r: Likewise.
* ld-powerpc/tlsexe.t: Likewise.
* ld-powerpc/tlsexe32.d: Likewise.
* ld-powerpc/tlsexe32.g: Likewise.
* ld-powerpc/tlsexe32.r: Likewise.
* ld-powerpc/tlsexe32.t: Likewise.
* ld-powerpc/tlsexetoc.d: Likewise.
* ld-powerpc/tlsexetoc.g: Likewise.
* ld-powerpc/tlsexetoc.r: Likewise.
* ld-powerpc/tlsexetoc.t: Likewise.
* ld-powerpc/tlsmark.d: Likewise.
* ld-powerpc/tlsmark32.d: Likewise.
* ld-powerpc/tlsopt1.d: Likewise.
* ld-powerpc/tlsopt1_32.d: Likewise.
* ld-powerpc/tlsopt2.d: Likewise.
* ld-powerpc/tlsopt2_32.d: Likewise.
* ld-powerpc/tlsopt3.d: Likewise.
* ld-powerpc/tlsopt3_32.d: Likewise.
* ld-powerpc/tlsopt4.d: Likewise.
* ld-powerpc/tlsopt4_32.d: Likewise.
* ld-powerpc/tlsso.d: Likewise.
* ld-powerpc/tlsso.g: Likewise.
* ld-powerpc/tlsso.r: Likewise.
* ld-powerpc/tlsso.t: Likewise.
* ld-powerpc/tlsso32.d: Likewise.
* ld-powerpc/tlsso32.g: Likewise.
* ld-powerpc/tlsso32.r: Likewise.
* ld-powerpc/tlsso32.t: Likewise.
* ld-powerpc/tlstoc.d: Likewise.
* ld-powerpc/tlstoc.g: Likewise.
* ld-powerpc/tlstoc.t: Likewise.
* ld-powerpc/tlstocso.d: Likewise.
* ld-powerpc/tlstocso.g: Likewise.
* ld-powerpc/tlstocso.t: Likewise.
* ld-powerpc/tocopt.out: Likewise.

* gas/cfi/cfi.exp: Remove redundant ppc test.  Exclude
powerpc-pe targets from cfi-common-6 test.
* gas/cfi/cfi-ppc-1.d: Use objdump to handle pe.
* gas/cfi/cfi-ppc-1.s: Don't use .type and .size.
* gas/ppc/ppc.exp: Exclude various tests for powerpc-pe.  Exclude
vle tests for le targets.
* gas/ppc/476.d, * gas/ppc/476.s: Update for le output.  Use .text
rather than section directive with quotes.
* gas/ppc/a2.d, * gas/ppc/a2.s: Likewise.
* gas/ppc/altivec.d, * gas/ppc/altivec.s: Likewise.
* gas/ppc/altivec2.d: Likewise.
* gas/ppc/altivec_and_spe.d: Likewise.
* gas/ppc/astest.d: Likewise.
* gas/ppc/astest2.d: Likewise.
* gas/ppc/astest2_64.d: Likewise.
* gas/ppc/astest64.d: Likewise.
* gas/ppc/booke.d, * gas/ppc/booke.s: Likewise.
* gas/ppc/cell.d, * gas/ppc/cell.s: Likewise.
* gas/ppc/common.d, * gas/ppc/common.s: Likewise.
* gas/ppc/e500.d, * gas/ppc/e500.s: Likewise.
* gas/ppc/e500mc.d, * gas/ppc/e500mc.s: Likewise.
* gas/ppc/e500mc64_nop.d, * gas/ppc/e500mc64_nop.s: Likewise.
* gas/ppc/e5500_nop.d, * gas/ppc/e5500_nop.s: Likewise.
* gas/ppc/e6500.d, * gas/ppc/e6500.s: Likewise.
* gas/ppc/e6500_nop.d, * gas/ppc/e6500_nop.s: Likewise.
* gas/ppc/machine.d: Likewise.
* gas/ppc/power4.d, * gas/ppc/power4.s: Likewise.
* gas/ppc/power4_32.d, * gas/ppc/power4_32.s: Likewise.
* gas/ppc/power6.d, * gas/ppc/power6.s: Likewise.
* gas/ppc/power7.d, * gas/ppc/power7.s: Likewise.
* gas/ppc/ppc750ps.d, * gas/ppc/ppc750ps.s: Likewise.
* gas/ppc/regnames.d: Likewise.
* gas/ppc/simpshft.d: Likewise.
* gas/ppc/test1elf32.d: Likewise.
* gas/ppc/test1elf64.d: Likewise.
* gas/ppc/titan.d, * gas/ppc/titan.s: Likewise.
* gas/ppc/vle-reloc.s: Likewise.
* gas/ppc/vle-simple-1.s: Likewise.
* gas/ppc/vle-simple-2.s: Likewise.
* gas/ppc/vle-simple-3.s: Likewise.
* gas/ppc/vle-simple-4.s: Likewise.
* gas/ppc/vle-simple-5.s: Likewise.
* gas/ppc/vle-simple-6.s: Likewise.
* gas/ppc/vle.s: Likewise.
* gas/ppc/vsx.d, * gas/ppc/vsx.s: Likewise.

*** empty log message ***

daily update

*** empty log message ***

daily update

gas/testsuite:
2012-10-27  James Lemke  <jwlemke@codesourcery.com>

* gas/m68k/all.exp: Exclude pr11676 for fido-*-*.

*** empty log message ***

daily update

2012-10-26  Pedro Alves  <palves@redhat.com>

* amd64-tdep.c (amd64_relocate_instruction): Use
store_unsigned_integer instead of memcpy.
* i386-tdep.c (i386_relocate_instruction): Ditto.

2012-10-26  Pedro Alves  <palves@redhat.com>

* infrun.c (handle_inferior_event) <TARGET_WAITKIND_SIGNALLED>:
Remove comment.

2012-10-26  Pedro Alves  <palves@redhat.com>

* infrun.c (handle_inferior_event) <TARGET_WAITKIND_SIGNALLED>:
Remove comment.

* gdb.texinfo (General Query Packets): Use @itemx for QAgent.

2012-10-26  Pedro Alves  <palves@redhat.com>

* target.c (target_waitstatus_to_string): Handle
TARGET_WAITKIND_VFORK_DONE.

2012-10-26  Pedro Alves  <palves@redhat.com>

* infrun.c (handle_inferior_event): Print TARGET_WAITKIND_VFORKED
as "TARGET_WAITKIND_VFORKED", not "TARGET_WAITKIND_FORKED".

* po/hr.po: New Croation translation.
* configure.in (ALL_LINGUAS): Add hr.
* configure: Regenerate.

* po/uk.po: Updated Ukranian translation.

* dwarf2.h (DW_AT_APPLE_optimized, DW_AT_APPLE_flags)
(DW_AT_APPLE_isa, DW_AT_APPLE_block)
(DW_AT_APPLE_major_runtime_vers, DW_AT_APPLE_runtime_class)
(DW_AT_APPLE_omit_frame_ptr, DW_AT_APPLE_property_name)
(DW_AT_APPLE_property_getter, DW_AT_APPLE_property_setter)
(DW_AT_APPLE_property_attribute, DW_AT_APPLE_objc_complete_type)
(DW_AT_APPLE_property, DW_OP_GNU_entry_value): New macros.

2012-10-26  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

* s390-mkopc.c: Accept empty lines in s390-opc.txt.
* s390-opc.c: Add M_20OPT field. New instruction formats RRF_RURR2 and RRF_RMRR.
* s390-opc.txt: Add new instructions.  New instruction type for lptea.

2012-10-26  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

* gas/testsuite/gas/s390/zarch-z10.d: Refreshed.
* gas/testsuite/gas/s390/zarch-z10.s: Refreshed.
* gas/testsuite/gas/s390/zarch-z196.d: Refreshed.
* gas/testsuite/gas/s390/zarch-z196.s: Refreshed.
* gas/testsuite/gas/s390/zarch-z9-109.d: Refreshed.
* gas/testsuite/gas/s390/zarch-z990.d: Refreshed.
* gas/testsuite/gas/s390/zarch-z990.s: Refreshed.
* gas/testsuite/gas/s390/zarch-zEC12.d: Refreshed.
* gas/testsuite/gas/s390/zarch-zEC12.s: Refreshed.

gas/testsuite:

        * gas/z8k/z8k.exp: Run translate-ops test.
        * gas/z8k/translate-ops.s: New file.
        * gas/z8k/translate-ops.d: New file.

opcodes:

        * z8kgen.c (struct op): Fix encoding for translate opcodes (trdb,
        trdrb, trib, trirb, trtdb, trtdrb, trtib, trtirb).  Remove
        non-existing opcode trtrb.
        * z8k-opc.h: Regenerate.

PR target/14758
bfd/
* elf32-ppc.c (ppc_elf_reloc_type_lookup): Decode ppc64 _DS
bfd_reloc values.  Map to corresponding D-form relocs.
(is_insn_ds_form, is_insn_qs_form): New functions.
(ppc_elf_relocate_section): Validate insn with DS-form or DQ-form
fields using D-form reloc.
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Fix comment.
(md_assemble): Translate to _DS relocs for ppc32 as well as ppc64.
(tc_gen_reloc): Handle _DS relocs in ppc32 mode.

* gas/ppc/power4.s: Fix invalid lq offsets.
* gas/ppc/power4.d: Update.

* ppc-opc (powerpc_opcodes): "lfdp" and "stfdp" use DS offset.

Add final_layout_sequence.txt to MOSTLYCLEANFILES

* testsuite/Makefile.am (MOSTLYCLEANFILES): Add
final_layout_sequence.txt.
* testsuite/Makefile.in: Regenerated.

*** empty log message ***

daily update

Strip out -Wp,-D_FORTIFY_SOURCE= for gold tests

* testsuite/Makefile.am (COMPILE1): New variable. Renamed from
COMPILE generated by automake.
(LINK1): Likewise.
(CXXCOMPILE1): Likewise.
(CXXLINK1): Likewise.
(COMPILE): Strip out -Wp,-D_FORTIFY_SOURCE= from COMPILE1.
(LINK): Likewise.
(CXXCOMPILE): Likewise.
(CXXLINK): Likewise.
* testsuite/Makefile.in: Regenerated.

Issue a fatal error on bad fwrite return

* dwp.cc (Dwo_file::record_target_info): Issue a fatal error
on bad fwrite return.

Use section_offset_type in remap_str_offset

* dwp.cc (Dwo_file::remap_str_offset): Use section_offset_type
on val.

* gdb.texinfo (General Query Packets): Use @itemx.

gdb/testsuite:

* gdb.trace/ftrace.exp (test_fast_tracepoints): Use
'setup_kfail' instead of 'setup_kfail_for_target'.
* gdb.base/varargs.exp: Likewise.
* lib/gdb.exp (setup_kfail_for_target): Remove.

Replace _GLOBAL_OFFSET_TABLE_ lookup with htab->elf.hgot

* elf32-i386.c (elf_i386_size_dynamic_sections): Replace
_GLOBAL_OFFSET_TABLE_ lookup with htab->elf.hgot.
* elf64-x86-64.c (elf_x86_64_size_dynamic_sections): Likewise.

gdb.base/ldbl_e308.exp: Do not allow "inf" in value output.

That was an attempt at handling the targets where sizeof(long double)
is less than 8, but the way it was implement allows the bug that
this testcase verifies to come back without being noticed.

gdb/testsuite/ChangeLog:

        * gdb.base/ldbl_e308.exp: Remove "inf" from possible expected
        output for "print inp" test.

* gdb.base/varargs.exp: PR gdb/12790 is now fixed.

* gdb.base/callfuncs.exp: PR gdb/12783 is now fixed.

Remove address check if HIDDEN_UNDEF_TEST is defined

* ld-elfvsb/main.c (main_visibility_checkcom): Remove address
check for visibility_def if HIDDEN_UNDEF_TEST is defined.
(main_visibility_checkweak): Remove address check for
visibility_func if HIDDEN_UNDEF_TEST is defined.

*** empty log message ***

* ld-scripts/empty-aligned.d: Revert last change.  Allow more
than one header, just not two PT_LOAD.
* ld-elf/stack.s: Use .long 0 rather than nops.

daily update

gas/testsuite/
* gas/i386/rex.s: Add test of REX prefix before fsave (i.e. fwait).
* gas/i386/rex.d: Update.

opcodes/
* i386-dis.c (ckprefix): When bailing out for fwait with prefixes,
set rex_used to rex.

Don't decompress the section in bfd_is_section_compressed

* compress.c (bfd_is_section_compressed): Don't decompress the
section.

Add comments in ravenscar_sparc_fetch_registers.

gdb/ChangeLog:

* ravenscar-sparc-thread.c (ravenscar_sparc_fetch_registers):
Add comments.

remote packet sent after Ravenscar inferior exited

When debugging a program using the Ravenscar profile, the debugger
sometimes tries to send the following packet to the remote after
the inferior exited.

     (gdb) c
     Continuing.
     [...]
     Sending packet: $vCont;c:1#13...Ack
     Packet received: W00
     Sending packet: $Hg1#e0...putpkt: write failed: Broken pipe.

As the inferior exited, the remote has already disconnected, and thus
the operation fails.

The reason why GDB sends the package is because the ravenscar-thread
module tries to updates the list of threads.  But this doesn't make
sense, since the program has exited.  This patch fixes it.

gdb/ChangeLog:

        * ravenscar-thread.c (ravenscar_wait): Only update the list
        of threads and inferior_ptid if the inferior is still alive.

[Ada] use lbasename when testing if file is part of Ada runtime.

We use a list of regular expressions to match a symtab filenames
against the names of the files in the Ada runtime.  These regular
expressions do assume that the filename is a basename, however.
So make sure to evaluate these regular expressions against
the symtab's filename.

Without this patch, we run into problems when the Ada runtime was built
using a project file (through gprbuild).

gdb/ChangeLog:

        * ada-lang.c (is_known_support_routine): Use lbasename when
        matching the symtab's filename against
        known_runtime_file_name_patterns.

[Ada] Allow assignment to wide string.

Given the following variable declaration...

   Www : Wide_String := "12345";

... this patch allows the following assignment to work:

   (gdb) set variable www := "qwert"

Without this patch, the debugger rejects the assignment because
the size of the array elements are different:

   (gdb) set www := "asdfg"
   Incompatible types in assignment

(on the lhs, we have an array of 2-bytes elements, and on the rhs,
we have a standard 1-byte string).

gdb/ChangeLog:

        * ada-lang.c (ada_same_array_size_p): New function.
        (ada_promote_array_of_integrals): New function.
        (coerce_for_assign): Add handling of arrays where the elements
        are integrals of a smaller size than the size of the target
        array element type.

gdb/testsuite/ChangeLog:

        * gdb.ada/set_wstr: New testcase.

off-by-one max exponent computation in convert_doublest_to_floatformat

Assuming the following variable definition:

    long double inp = 2.0;

On platforms where "long double" is a double precision IEEE flaoting
point, GDB currently behaves as follow:

    (gdb) set variable inp = 1.6e+308l
    (gdb) p inp
    $2 = inf   <<<<---- !!!!

Instead, the value of "inp" should be printed as:

    (gdb) p inp
    $1 = 1.6e+308

The problem is due to a small error in the comparison of the exponent
versus the maximum value this exponent can take, causing us to think
that the value was too big to fit. But it isn't.

gdb/ChangeLog:

        * doublest.c (convert_doublest_to_floatformat): Fix comparison
        against maximum exponent value.

gdb/testsuite/ChangeLog:

        * gdb.base/ldbl_e308.c, gdb.base/ldbl_e308.exp: New files.

[Ada] Skip unwind-seh.c when searching first "user" frame

On x86_64-windows with GCC 4.7 (using native SEH info), the debugger
behaves as follow:

    (gdb) catch exception unhandled
    Catchpoint 1: unhandled Ada exceptions
    (gdb) run
    Starting program: C:\[...]\b.exe

    Catchpoint 1, unhandled CONSTRAINT_ERROR at 0x000000000040cc57 in _GCC_specific_handler ([...]) at ../../../src/libgcc/unwind-seh.c:289
    [...]

This is after compiler the following code:

    procedure B is
    begin
       raise Constraint_Error;
    end B;

... using the following command:

    % gnatmake -g b

When hitting the exception catchpoint, it should have gone up the stack
all the way until finding the frame corresponding to procedure B.
But if stopped short because unwind-seh.c is compiled with debugging
information, and the debugger is also able to locate that source file.

To prevent this from happening, this patch adds unwind-seh.c to the list
of files that should be ignored, regardless of other factors.

gdb/ChangeLog:

        * ada-lang.h (ADA_KNOWN_RUNTIME_FILE_NAME_PATTERNS): Add entry for
        "unwind-seh.c".

[Ada] Pointers to unconstrained arrays inside variant record.

gdb/ChangeLog:

        * ada-lang.c (ada_template_to_fixed_record_type_1): Do not
        strip typedef layer when computing the fixed type's field type,
        only when computing its size.

gdb/testsuite/ChangeLog:

        * gdb.ada/unc_arr_ptr_in_var_rec: New testcase.

* gdb.base/callfuncs.exp: PR gdb/12783 is now fixed.

PR gdb/12783
* i386-tdep.c (i386_return_value): Handle complex double and long
double.

gdb/testsuite/
* gdb.base/callfuncs.exp (do_function_calls): Fix
setup_kfail_for_target for -m32 mode.

* configure.ac (FLAGS_FOR_TARGET,target=cygwin): Fix for building
against Mingw64 w32api.
* configure: Regenerate.

[Windows] run program with space in path to exe.

The following works...

    % gdb c:\path to exe\foo.exe
    (gdb) start

... unless a file or directory called "c:\path" or "c:\path to" exist.
This is what happens in the latter case:

    (gdb) start
    [...]
    Error creating process C:\path to exe\foo.exe (error 193).

This is because we are calling CreateProcess (et al) without specifying
the lpApplicationName, so Windows determines the name of the executable
using the second argument, which is the entire command line.  This
command line is a space-separated list of tokens, so the space in
the path to the executable which potentially creates an ambiguity.
The ambiguity is automatically resolved unless we're in the situation
above.

The solution, as suggested by the MSDN documentation for CreateProcess
is to quote the executable name.

gdb/ChangeLog:

        * windows-nat.c (windows_create_inferior) [!__CYGWIN__]:
        New local variable args_len.
        Quote the name of the executable when computing the command line.

Don't set bfdtest1 with findfile

* binutils-all/ar.exp (bfdtest1): Remove findfile.

Move disable_target_specific_optimizations to bfd_link_info

include/

* bfdlink.h (bfd_link_info): Add
disable_target_specific_optimizations.

ld/

* ld.h (command_line): Remove
disable_target_specific_optimizations.
(RELAXATION_DISABLED_BY_DEFAULT): Removed.
(RELAXATION_DISABLED_BY_USER): Likewise.
(RELAXATION_ENABLED): Likewise.
(DISABLE_RELAXATION): Likewise.
(ENABLE_RELAXATION): Likewise.

* ldmain.c (main): Updated.

* ldmain.h (RELAXATION_DISABLED_BY_DEFAULT): New macro.
(RELAXATION_DISABLED_BY_USER): Likewise.
(RELAXATION_ENABLED): Likewise.
(DISABLE_RELAXATION): Likewise.
(ENABLE_RELAXATION): Likewise.

gold/
* testsuite/Makefile.am (TEST_OBJCOPY): New macro.
* testsuite/Makefile.in: Regenerate.
* testsuite/dwp_test.h: New source file.
* testsuite/dwp_test_1.cc: New source file.
* testsuite/dwp_test_1.s: New source file.
* testsuite/dwp_test_1.sh: New source file.
* testsuite/dwp_test_1b.cc: New source file.
* testsuite/dwp_test_1b.s: New source file.
* testsuite/dwp_test_2.cc: New source file.
* testsuite/dwp_test_2.s: New source file.
* testsuite/dwp_test_2.sh: New source file.
* testsuite/dwp_test_main.cc: New source file.
* testsuite/dwp_test_main.s: New source file.

gold/
* dwp.h: New header file.
* dwp.cc: New source file.
* gold.h: Move shared declarations to system.h.
* system.h: New header file.
* Makefile.am: Add dwp.
* Makefile.in: Regenerate.

binutils/
* dwarf.c (do_debug_addr, do_debug_cu_index): New global flags.
(load_debug_info): Fix typo.
(cu_tu_indexes_read, shndx_pool, shndx_pool_size, shndx_pool_used):
New global variables.
(prealloc_cu_tu_list, add_shndx_to_cu_tu_entry, end_cu_tu_entry)
(process_cu_tu_index, load_cu_tu_indexes, find_cu_tu_set)
(display_cu_index): New functions.
(dwarf_select_sections_by_names): Add "debug_addr", "cu_index".
Sort entries alphabetically.
(dwarf_select_sections_all): Set do_debug_addr, do_debug_cu_index.
(debug_displays): Add .debug_cu_index, .debug_tu_index.
Clean up formatting.
* dwarf.h (dwarf_section_display_enum): Add dwp_cu_index,
dwp_tu_index.
(do_debug_addr, do_debug_cu_index): New global flags.
(find_cu_tu_set): New function declaration.
* objdump.c (usage): Add --dwarf=addr, --dwarf=cu_index.
* readelf.c (find_section_in_set): New function.
(usage): Add --debug-dump=addr, --debug_dump=cu_index.
(process_section_headers): Check do_debug_addr and do_debug_cu_index.
(section_subset): New global variable.
(load_debug_section): Restrict search to section subset.
(display_debug_section): Add section index as paramter.  Select subset
of sections when dumping a .dwp file.  Update caller.

*** empty log message ***

PR bootstrap/54820
* configure.ac (have_static_libs): Force 'no' for GCC version < 4.5.
* configure: Regenerate.

daily update

gold/
* dwarf_reader.cc (Dwarf_ranges_table::read_range_list): Call
Dwarf_info_reader::read_from_pointer.
(Dwarf_pubnames_table::read_header): Likewise.
(Dwarf_pubnames_table::next_name): Likewise.
(Dwarf_die::read_attributes): Likewise.
(Dwarf_die::skip_attributes): Likewise.
(Dwarf_info_reader::read_from_pointer): New function template.
* dwarf_reader.h (Dwarf_ranges_table): Add dwinfo_.
(Dwarf_pubnames_table): Likewise.
(Dwarf_info_reader::read_from_pointer): New function template.
* gdb-index.cc (Gdb_index_info_reader): Adjust call to
Dwarf_pubnames_table ctor.

gold/
* dwarf_reader.cc (Dwarf_info_reader::do_parse): Use stored
abbrev_shndx.
* dwarf_reader.h (Dwarf_info_reader::Dwarf_info_reader): Initialize
abbrev_shndx_.
(Dwarf_info_reader::set_abbrev_shndx): New method.
(Dwarf_info_reader::abbrev_shndx_): New data member.

gold/
* dwarf_reader.cc (make_elf_reloc_mapper): Check size and endianness
from object, not parameters.
(Dwarf_info_reader::parse): Likewise.
* object.h (Relobj::elfsize, Relobj::is_big_endian): New methods.
(Relobj::do_elfsize, Relobj::do_is_big_endian): New methods.
(Sized_relobj::do_elfsize, Sized_relobj::do_is_big_endian): New
methods.

gold/
* fileread.cc (Input_file::Input_file): New constructor.
* fileread.h (class Input_file): Add new constructor.

* gdb.base/callfuncs.exp: PR gdb/12796, gdb/12798 and gdb/12800
are now fixed.

PR gdb/12796
PR gdb/12798
PR gdb/12800
* amd64-tdep.h (enum amd64_regnum): Add AMD64_ST1_REGNUM and
AMD64_FTAG_REGNUM.
* amd64-tdep.c (amd64_classify): Classify complex types.
(amd64_return_value): Handle the COMPLEX_X87 class.

binutils
* readelf.c (get_note_type): Handle NT_SIGINFO, NT_FILE.
(print_core_note): New function.
(process_note): Call it.
include/common/elf
* common.h (NT_SIGINFO, NT_FILE): New defines.

gdb/testsuite:

* gdb.base/info-os.exp: Resume the inferior until it exits.

Change target-wide-charset to UTF-16 on ppc-aix.

On ppc-aix, type wchar_t is 2 bytes long, so override the default
target-wide-charset (UTF-32) with UTF-16. This allows us to print
wide characters correctly.

gdb/ChangeLog:

        * rs6000-aix-tdep.c (rs6000_aix_auto_wide_charset): New function.
        (rs6000_aix_init_osabi): Set auto_wide_charset gdbarch method.

Set default target-wide-charset setting to "UTF-16" for x86_64-windows.

Type wchar_t is only 2 bytes long on x86_64-windows.

gdb/ChangeLog:

        * amd64-windows-tdep.c (amd64_windows_auto_wide_charset): New
        function.
        (amd64_windows_init_abi): Set auto_wide_charset gdbarch method
        to amd64_windows_auto_wide_charset.

bfd/
* bfd-in.h (bfd_elf_stack_segment_size): Declare.
* bfd-in2.h: Rebuilt.
* elfxx-target.h (elf_backend_stack_align): New.
(elfNN_bed): Add it.
* elf-bfd.h (struct elf_backend_data): Add stack_align field.
* elf.c (bfd_elf_map_sections_to_segments): Pay attention to
stack_align and stacksize for PT_GNU_STACK segment.
(assign_file_positions_for_non_load_sections): Set p_memsz for
PT_GNU_STACK segment.
(copy_elf_program_header): Copy PT_GNU_STACK size.
* elflink.c (bfd_elf_stack_segment_size): New function, taken from
uclinux backends.
(bfd_elf_size_dynamic_sections): Determine
PT_GNU_STACK requirements after calling backend.  Pay attention to
stacksize.
* elf32-bfin.c (elf32_bfinfdpic_always_size_sections): Call
bfd_elf_stack_segment_size.
(elf32_bfinfdpic_modify_program_headers): Delete.
(elf32_bfingfdpic_copy_private_bfd_data): Don't copy PT_GNU_STACK
here.
(elf_backend_stack_align): Override.
(elf_backend_modify_program_headers): Don't override.
* elf32-frv.c (frvfdpic_always_size_sections): Call
bfd_elf_stack_segment_size.
(elf32_frvfdpic_modify_program_headers): Delete.
(elf32_frvfdpic_copy_private_bfd_data): Don't copy PT_GNU_STACK
here.
(elf_backend_stack_align): Override.
(elf_backend_modify_program_headers): Don't override.
* elf32-lm32.c (lm32_elf_always_size_sections): Leave
PT_GNU_STACK creation to underlying elf support.  Check
__stacksize here for backwards compatibility, and set it if
needed.
(lm32_elf_modify_segment_map): Delete.
(lm32_elf_modify_program_headers): Delete.
(elf_backend_stack_align): Override.
(elf_backend_modify_segment_map): Don't override.
(elf_backend_modify_program_headers): Don't override.
* elf32-sh.c (sh_elf_always_size_sections): Call
bfd_elf_stack_segment_size.
(sh_elf_modify_program_headers): Delete.
(sh_elf_copy_private_data): Don't copy PT_GNU_STACK
here.
(elf_backend_stack_align): Override.
(elf_backend_modify_program_headers): Don't override.
* elf32-tic6x.c (elf32_tic6x_always_size_sections): Call
bfd_elf_stack_segment_size.
(elf32_tic6x_modify_program_headers): Delete.
(elf32_tic6x_copy_private_data): Delete.
(elf_backend_stack_align): Override.
(bfd_elf32_bfd_copy_private_bfd_data): Don't override.
(elf_backend_modify_program_headers): Don't override.

include/
* bfdlink.h (struct bfd_link_info): Add stacksize option.

ld/
* ld.texinfo (stack-size): New option.
* emultempl/elf32.em: Add stack-size option.

ld/testsuite/
* ld-elf/binutils.exp: Add -z stack-size=0.
* ld-elf/elf.exp: Add stack-exec and stack-size tests.
* ld-elf/orphan-region.d: Add stack-size option. Remove xfail.
* ld-elf/stack-exec.rd: New.
* ld-elf/stack-size.rd: New.
* ld-elf/stack.s: New.
* ld-scripts/empty-aligned.d: Add stack-size option.
* ld-sh/fdpic-stack-set.d: New.
* ld-tic6x/shlib-1.rd: Remove __stacksize symbol.
* ld-tic6x/shlib-1b.rd: Likewise.
* ld-tic6x/shlib-1r.rd: Likewise.
* ld-tic6x/shlib-1rb.rd: Likewise.
* ld-tic6x/shlib-app-1.rd: Likewise.
* ld-tic6x/shlib-app-1b.rd: Likewise.
* ld-tic6x/shlib-app-1r.rd: Likewise.
* ld-tic6x/shlib-app-1rb.rd: Likewise.
* ld-tic6x/shlib-noindex.rd: Likewise.
* ld-tic6x/static-app-1.rd: Likewise.
* ld-tic6x/static-app-1b.rd: Likewise.
* ld-tic6x/static-app-1r.rd: Likewise.
* ld-tic6x/static-app-1rb.rd: Likewise.

gdb/
* event-top.c (mark_async_signal_handler_wrapper): Remove.
* event-top.h: Remove its declaration.
(async_request_quit): Call mark_async_signal_handler instead of
mark_async_signal_handler_wrapper.
(async_do_nothing, async_disconnect): Likewise.
(async_stop_sig): Likewise.
* remote.c (handle_remote_sigint): Likewise.
(handle_remote_sigint_twice): Likewise.

gdb/
* event-top.c (sigint_token, sighup_token): Replace 'void *'
with 'static struct async_signal_handler *'.
(sighup_token, sigquit_token, sigstp_token): Likewise.

*** empty log message ***

daily update

opcodes/
* ppc-opc.c (powerpc_opcodes) <vcfpsxws>: Fix opcode spelling.

gas/testsuite/
* gas/ppc/altivec.s <vcfpsxws>: Fix opcode spelling.

Ali Anwar  <ali_anwar@codesourcery.com>

* gdbarch.sh (function_list): Use 'pstring' when printing a
variable which could return NULL.
* gdbarch.c: Regenerate.

include/
PR ld/14426
* bfdlink.h (bfd_link_info): Add ignore_hash.
ld/
PR ld/14426
* ldlex.h (option_values): Add OPTION_IGNORE_UNRESOLVED_SYMBOL.
* lexsup.c (parse_args): Likewise.
(ld_options): Describe --ignore-unresolved-symbol.
* ldmain.h (add_ignoresym): Declare.
* ldmain.c (add_ignoresym): New function, extracted from..
(undefined_symbol): ..here.  Return if the symbol is in ignore_hash.
(constructor_callback): Don't use global link_info here.
(reloc_overflow): Likewise.

* as.c (dump_statistics): Compute data size as the delta between
current sbrk(0) and start_sbrk.
* (main): Set start_sbrk to sbrk(0) on entry.

PR bootstrap/54820
* Makefile.tpl (STAGE1_FLAGS_TO_PASS): New variable.
(all-[+prefix+][+module+]): Pass stage1_args to sub-makes.
(all-stage[+id+]-[+prefix+][+module+]): Likewise, if prev is false.
(clean-stage[+id+]-[+prefix+][+module+]): Likewise, if prev is false.
(host_modules): Set stage1_args to STAGE1_FLAGS_TO_PASS.
* Makefile.in: Regenerate.
* configure.ac (have_static_libs): New variable and associated check.
(stage1-ldflags): Move to after stage1_libs and set to -static-libstdc++
-static-libgcc if stage1_libs is empty and have_static_libs is yes.
* configure: Regenerate.

* plugin.c (plugin_load_plugins): Warning fix.

* cache.c (cache_bmmap): Don't use void* arithmetic.

*** empty log message ***

daily update

Update binutils-all/dw2-1.W

* binutils-all/dw2-1.W: Updated.

Handle x32 in dump_dwarf

* objdump.c (dump_dwarf): Handle bfd_mach_x64_32 and
bfd_mach_x64_32_intel_syntax.