git.libre-soc.org Git - mesa.git/log

anv: Support modifiers in GetImageFormatProperties2

Images with modifiers come with restrictions:

1. They have to be simple 2D images right now

2. They need to have a sensible format (not compressed, multi-plane, or
    non-power-of-two)

3. If a CCS modifier is being requested, they have to actually support
    CCS_E and be CCS-compatible with any other formats the client may
    wish to use for image views.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3434>

anv: Drop some VK_IMAGE_TILING_OPTIMAL checks

The DRM format modifiers extension adds a TILING_DRM_FORMAT_MODIFIER
which will be used for modifiers so we can no longer use OPTIMAL to
indicate tiled inside the driver.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3434>

aco: print assembly with CLRXdisasm for GFX6-GFX7 if found on the system

LLVM only supports GFX8+. Using CLRXdisasm works most of the time,
so it's useful to add support for it.

Original patch by Daniel Schürmann.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3439>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3439>

vulkan/wsi: disable the hardware cursor

Ensure the hardware cursor is disabled when we set the mode for a
VkDisplayKHR object. The extension doesn't expose any mechanisms to
program the hardware cursor, so we need to ensure it is hidden.

Currently, it seems like X is responsible for disabling the cursor
before handing over the lease. But that seems a little frail, and we
should be disabling the cursor ourselves so it works correctly
independently of how the lease was prepared for us.

Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/1922>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/1922>

gallium/swr: Disable showing detected arch message.

When swr driver is in use it print detected architecture
message to std::err. It can be harmfull when swr is using
in multinodes environments.
It can be enabled setting env var SWR_PRINT_INFO to 1.

Reviewed-by: Jan Zielinski <jan.zielinski@intel.com>

aco: fix emitting slc for MUBUF instructions on GFX6-GFX7

Same as GFX10, only GFX8/GFX9 moved that bit near the opcode.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3437>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3437>

panfrost/midgard: Fix swizzle for store instructions

The current logic considers that the nir_intrinsic_component(store_intr)
encodes the source components start, but it actually encodes the
destination one. Source component offset adjustment is taken care of in
install_registers_instr(), when offset_swizzle() is called.

This fixes dEQP-GLES2.functional.shaders.random.all_features.fragment.45
when PAN_MESA_DEBUG=deqp (looks like exposing GLES3 features has an
impact on the varyings layout).

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3429>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3429>

docs: do not double-close link tag

Fixes: f8148d0cc17 "docs: remove mailing list as way of submitting patches"
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3431>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3431>

docs: remove double-closed definition-list

Fixes: bc17ac58661 "docs: add documentation for building with meson"
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3431>

docs: move paragraph closing tag

The pre-tag right before is a block-level tag, which means it implicitly
terminates the paragraph. So there's no paragraph to close after this.
Instead, move the paragraph-closing before the pre-tag, to explicitly
close the paragraph.

Fixes: 41b3eb08d9f "docs: update meson docs for windows"
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3431>

docs: use code-tags instead of pre-tags

Similar to the previous two commits, it seems more appropriate to use
code-tags here than pre-tag.

Fixes: 9af6c38deff "docs: Add use of Closes: tag for closing gitlab issues"
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3431>

docs: use code-tags instead of pre-tags

Similar to the previous commit, code-tags seems more appropriate than
pre-tags here. So let's change it.

Fixes: ca0c1e69cab "docs: update releasing process to use new scripts and gitlab"
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3431>

docs: use code-tag instead of pre-tag

It's unlikely the author meant to use <pre>-here, as that starts a whole
new block. Instead, the inline code-tag seems more appropriate here.

Fixes: 41b3eb08d9f "docs: update meson docs for windows"
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3431>

docs: open paragraph before closing it

Fixes: 44c5e634a5c "docs: update meson docs for windows"
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3431>

docs: fix paragraphs

Paragraphs are terminated by pre-tags, so the latter one closes a new,
empty one. Let's split the paragraph in two around the pre-tag instead.

Fixes: c0dfe8c6dfd "docs: do not use div for line-breaking"
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3431>

docs: fix typo in html tag name

Fixes: 5d11a828e10 "docs: update install docs for meson"
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3431>

util: call bind_sampler_states before setting sampler_views

Fixes the following valgrind error:

    Invalid read of size 16
       at 0x28F458A1: si_set_sampler_view_desc (in radeonsi_drv_video.so)
       by 0x28F4657E: si_set_sampler_views (in radeonsi_drv_video.so)
       by 0x28D62BF5: util_compute_blit (in radeonsi_drv_video.so)
       by 0x28D3A944: vlVaHandleVAProcPipelineParameterBufferType (in radeonsi_drv_video.so)
       by 0x28D34EE1: vlVaRenderPicture (in radeonsi_drv_video.so)
       by 0x4B2582B: vaRenderPicture (in libva.so.2.500.0)
     Address 0x18142a10 is 0 bytes inside a block of size 48 free'd
       at 0x48369AB: free (vg_replace_malloc.c:540)
       by 0x28D62D51: util_compute_blit (in radeonsi_drv_video.so)
       by 0x28D3A944: vlVaHandleVAProcPipelineParameterBufferType (in radeonsi_drv_video.so)
       by 0x28D34EE1: vlVaRenderPicture (in radeonsi_drv_video.so)
       by 0x4B2582B: vaRenderPicture (in libva.so.2.500.0)
     Block was alloc'd at
       at 0x4837B65: calloc (vg_replace_malloc.c:762)
       by 0x28EFB2EC: si_create_sampler_state (in radeonsi_drv_video.so)
       by 0x28D62C30: util_compute_blit (in radeonsi_drv_video.so)
       by 0x28D3A944: vlVaHandleVAProcPipelineParameterBufferType (in radeonsi_drv_video.so)
       by 0x28D34EE1: vlVaRenderPicture (in radeonsi_drv_video.so)
       by 0x4B2582B: vaRenderPicture (in libva.so.2.500.0)

Fixes: 69430d7e59e ("va: use a compute shader for the blit")
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2321
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3428>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3428>

nir: Fix printing of ~0 .locations.

I kept wondering what "429" meant in variable declarations, when it was
just a truncated ~0 snprintf.

Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3423>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3423>

meson: use github URL for wraps instead of completely unreliable wrapdb

Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3391>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3391>

docs: Update release calendar for 20.0

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3417>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3417>

lima: Fix alpha blending

Introduce separate helper functions to set the blendfactor bits.

Lima uses bits 0-2 for the type, bit 3 sets the inverted function
and bit 4 is set if alpha is used.
alpha_src_factor and alpha_dst_factor don't need the alpha bit, so
they are masked with 0xf. There is only place for 4 bits anyway.
If alpha_src_factor is PIPE_BLENDFACTOR_SRC_ALPHA_SATURATE, we need
to change it to PIPE_BLENDFACTOR_ONE first.
This is exactly what the blob does and we pass all
dEQP-GLES2.functional.fragment_ops.blend.* tests now.
Better than the blob btw...

Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Andreas Baierl <ichgeh@imkreisrum.de>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3411>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3411>

aco: ignore parallelcopies to the same register on jump threading

The more conservative lowering to CSSA inserts unnecessary parallelcopies
which might get coalesced and can be ignored on jump threading.

v2: outline is_empty_block() check.

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3385>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3385>

aco: handle phi affinities transitively through parallelcopies

This can coalesce most unnecessarily inserted parallelcopies
from lowering to CSSA.

v2: refactor loop a bit to make it more efficient and readable.

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3385>

aco: rework lower_to_cssa()

This patch changes lower_to_cssa to be much more conservative
about assumptions which phi operands might interfere.
Previously, this pass wasn't exhaustive and could miss some corner cases.

v2: remove optimizations to find better insertion points as it's hard
to guarantee that they are always correct and have overall no benefit.

Fixes: 0b8216b2cdbcaccfd2bd1a65be6b8ac5654e3067 ('aco: Lower to CSSA')
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3385>

aco: implement stream output with vec3 on GFX6

GFX6 doesn't support vec3.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3412>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3412>

aco: do not combine additions of DS instructions on GFX6

The offset field doesn't work as expected on GFX6.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3412>

aco: do not select 96-bit/128-bit variants for ds_read/ds_write on GFX6

Only GFX7 and later support large ds_read/ds_write.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3412>

intel/perf: report query split for mdapi

Also forgotten in the initial implementation.

v2: Report begin timestamp scaled by the timestamp frequency (Windows
behavior)

v3: Rename split to disjoint to match GL terminology (Tapani)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3112>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3112>

intel/perf: expose timestamp begin for mdapi

This was forgotten in the initial implementation.

v2: ensure the value is written for both GL & Vulkan queries

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3112>

anv: set depth stall enabled when depth flush enabled on gen12

This implements HW workaround #1409600907 for anv driver.

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3378>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3378>

iris: set depth stall enabled when depth flush enabled on gen12

This implements HW workaround #1409600907 for iris driver.

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3378>

anv: implement another workaround for non pipelined states

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3408>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3408>

iris: implement another workaround for non pipelined states

v2: add comment (Ken)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3408>

iris: handle new PIPE_CONTROL field

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3408>

genxml: add new Gen11+ PIPE_CONTROL field

PIPE_CONTROL gained a new field in its first DWORD on Gen11. We had no
use for it so far, but we start using it on Gen12.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3408>

st/mesa: Allocate full miplevels if MaxLevel is explicitly set

Some applications explicitly call glTex[ture]Parameteri[v] to set
GL_TEXTURE_MAX_LEVEL and GL_TEXTURE_BASE_LEVEL before uploading any
texture data.  Core Mesa initializes MaxLevel to 1000, so if it isn't
that, we know they've set it.  (We check for < TEXTURE_MAX_LEVELS to
avoid hardcoding that value, however.)

If MaxLevel - BaseLevel > 0, then the app is trying to tell us that
this texture is going to have multiple miplevels.  In that case, go
ahead and allocate the space for it.

Avoids many resource_copy_region calls at texture finalization time
in the Civilization VI benchmark.

Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3401>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3401>

aco: fix emitting SMEM instructions with no operands on GFX6-GFX7

Like s_memtime.

Fixes dEQP-VK.glsl.shader_clock.* on GFX6.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3407>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3407>

lima: fix handling of reverse depth range

Looks like we need to handle cases when near > far and near == far.
In first case we just need to swap near and far, and in second we
need subtract epsilon from near if it's not zero.

Fixes 10 tests in dEQP-GLES2.functional.depth_range.*

Reviewed-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3400>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3400>

nvc0: disable xfb's which don't have a stride

No stride / no attributes means that nothing is being written to the
buffer. However it might still prevent primitives from being written out
to the other buffers. Disabling it entirely seems to fix it.

Fixes GTF-GL45.gtf30.GL3Tests.transform_feedback.transform_feedback_overflow

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

lima/ppir: implement full liveness analysis for regalloc

The existing liveness analysis in ppir still ultimately relies on a
single continuous live_in and live_out range per register and was
observed to be the bottleneck for register allocation on complicated
examples with several control flow blocks.
The use of live_in and live_out ranges was fine before ppir got control
flow, but now it ends up creating unnecessary interferences as live_in
and live_out ranges may span across entire blocks after blocks get
placed sequentially.

This new liveness analysis implementation generates a set of live
variables at each program point; before and after each instruction and
beginning and end of each block.
This is a global analysis and propagates the sets of live registers
across blocks independently of their sequence.
The resulting sets optimally represent all variables that cannot share a
register at each program point, so can be directly translated as
interferences to the register allocator.

Special care has to be taken with non-ssa registers. In order to
properly define their live range, their alive components also need to be
tracked. Therefore ppir can't use simple bitsets to keep track of live
registers.

The algorithm uses an auxiliary set data structure to keep track of the
live registers. The initial implementation used only trivial arrays,
however regalloc execution time was then prohibitive (>1minute on
Cortex-A53) on extreme benchmarks with hundreds of instructions,
hundreds of registers and several spilling iterations, mostly due to the
n^2 complexity to generate the interferences from the live sets. Since
the live registers set are only a very sparse subset of all registers at
each instruction, iterating only over this subset allows it to run very
fast again (a couple of seconds for the same benchmark).

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3358>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3358>

lima/ppir: remove orphan load node after cloning

There are some cases in shades using control flow where the varying load
is cloned to every block, and then the original node is left orphan.
This is not harmful for program execution, but it complicates analysis
for register allocation as there is now a case of writing to a register
that is never read.
While ppir doesn't have a dead code elimination pass for its own
optimizations and it is not hard to detect when we cloned the last load,
let's remove it early.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3358>

iris: Print warning and return *out = NULL when fd to syncobj fails

Signed-off-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

iris: Advertise PIPE_CAP_NATIVE_FENCE_FD

Enables EGL_ANDROID_native_fence_sync.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

iris: Fix export of fences that have already completed.

After flushing batches, iris_fence_flush() asks the kernel whether
each batch's last_syncpt has already signalled or not.  (The idea is
that either the compute or render batch may not have actually had any
work queued up, so last_syncpt there might have been signalled a long
time ago.)  If it's already completed, we don't bother to record it.

A strange corner is the case of repeated flushes.  For example, we
might flush for some reason, and hit a glFlush(), and hit SwapBuffers.
It's possible for all the batches to have been flushed previously, -and-
for them to have actually completed.  In this case, we'll see that there
are no syncobj's to wait on, and record fence->count == 0.

This works fine internally - fence_finish can see count == 0 and realize
that it doesn't need to wait, for example.  But when working with native
FDs, we may be asked to export a fence with count == 0.  So we need an
actual synchronization primitive we can hand off.  Because all of the
relevant batches had been signalled when creating the fence, we want the
new dummy fence to be signalled as well.

So we just make a signalled syncobj and export it.

Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

android: Fix whitespace issue

Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost: Prefix schedule_program to prevent collision

Currently the schedule_program implementation being used is picked
at compile time, which on the Android platform means that the
bifrost compiler & scheduler is used for all targets, including
midgard based hardware.

This commit disambiguates between the two schedule_program functions.

Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

radeonsi: merge si_compile_llvm and si_llvm_compile functions

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3399>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3399>

radeonsi: remove useless #includes

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3399>

radeonsi: move code for shader resources into si_shader_llvm_resources.c

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3399>

radeonsi: move geometry shader code into si_shader_llvm_gs.c

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3399>

radeonsi: remove llvm_type_is_64bit

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3399>

radeonsi: move tessellation shader code into si_shader_llvm_tess.c

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3399>

radeonsi: move si_insert_input_* functions

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3399>

radeonsi: work around an LLVM crash when using llvm.amdgcn.icmp.i64.i1

Cc: 19.2 19.3 <mesa-stable@lists.freedesktop.org>
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3338>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3338>

radeonsi: fix si_build_wrapper_function for compute-based primitive culling

Fixes: 3b143369a55 "ac/nir, radv, radeonsi: Switch to using ac_shader_args"
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3338>

radeonsi/gfx10: separate code for determining the number of vertices for NGG

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi/gfx10: separate code for getting edgeflags from the gs_invocation_id VGPR

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: move VS_STATE.LS_OUT_PATCH_SIZE a few bits higher to make space there

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: make si_insert_input_* functions non-static

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

ac/cull: don't read Position.Z if it's not needed for culling

It could be NULL.

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: separate code computing info for small primitive culling

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

intel/compiler: Fix illegal mutation in get_nir_image_intrinsic_image

get_nir_image_intrinsic_image() was incorrectly mutating the value held
by the register which holds the intrinsic's first source (image index).

If this happened to be the register for an SSA def which is also used
elsewhere in the program, this meant that we would clobber that value
in subsequent uses.

Note that this only affects i965, because neither anv nor iris use the
binding table start sections, so nothing is ever added here.

Fixes KHR-GL46.compute_shader.resources-max on i965 with Eric Anholt's
MR !3240 applied. That MR reorders SSBOs and ABOs, so that test uses
image 0 and SSBO 0, causing this code to brilliantly add binding table
index 45 to both the image (correct) and the SSBO (bzzt, wrong!).

Fixes: 09f1de97a76 ("anv,i965: Lower away image derefs in the driver")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3404>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3404>

gitlab-ci: fix missing caselist.css/xsl

My best guess is that this was broken by d62dd8b0

Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3413>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3413>

relnotes: Add Vulkan 1.2

radv: enable Vulkan 1.2

This bumps the Vulkan version to 1.2.128.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: implement Vulkan 1.2 features and properties

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: implement Vulkan 1.1 features and properties

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: update VK_KHR_timeline_semaphore for Vulkan 1.2

Promoted to Vulkan 1.2 with the KHR suffix omitted.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: update VK_KHR_uniform_buffer_standard_layout for Vulkan 1.2

Promoted to Vulkan 1.2 with the KHR suffix omitted.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: update VK_KHR_shader_subgroup_extended_types for Vulkan 1.2

Promoted to Vulkan 1.2 with the KHR suffix omitted.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: update VK_KHR_shader_float_controls for Vulkan 1.2

Promoted to Vulkan 1.2 with the KHR suffix omitted.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: update VK_KHR_shader_float16_int8 for Vulkan 1.2

Promoted to Vulkan 1.2 with the KHR suffix omitted.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: update VK_KHR_shader_atomic_int64 for Vulkan 1.2

Promoted to Vulkan 1.2 with the KHR suffix omitted.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: update VK_KHR_imageless_framebuffer for Vulkan 1.2

Promoted to Vulkan 1.2 with the KHR suffix omitted.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: update VK_KHR_image_format_list for Vulkan 1.2

Promoted to Vulkan 1.2 with the KHR suffix omitted.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: update VK_KHR_driver_properties for Vulkan 1.2

Promoted to Vulkan 1.2 with the KHR suffix omitted.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: update VK_KHR_draw_indirect_count for Vulkan 1.2

Promoted to Vulkan 1.2 with the KHR suffix omitted.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: update VK_KHR_depth_stencil_resolve for Vulkan 1.2

Promoted to Vulkan 1.2 with the KHR suffix omitted.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: update VK_KHR_create_renderpass2 for Vulkan 1.2

Promoted to Vulkan 1.2 with the KHR suffix omitted.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: update VK_KHR_buffer_device_address for Vulkan 1.2

Promoted to Vulkan 1.2 with the KHR suffix omitted.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: update VK_KHR_8bit_storage for Vulkan 1.2

Promoted to Vulkan 1.2 with the KHR suffix omitted.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: update VK_EXT_scalar_block_layout for Vulkan 1.2

Promoted to Vulkan 1.2 with the EXT suffix omitted.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: update VK_EXT_sampler_filter_minmax for Vulkan 1.2

Promoted to Vulkan 1.2 with the EXT suffix omitted.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: update VK_EXT_host_query_reset for Vulkan 1.2

Promoted to Vulkan 1.2 with the EXT suffix omitted.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: update VK_EXT_descriptor_indexing for Vulkan 1.2

Promoted to Vulkan 1.2 with the EXT suffix omitted.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

anv: Enable Vulkan 1.2 support

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

anv: Implement the new core version property queries

Vulkan 1.2 introduces some new structures to get the properties and
features of a device from extensions that were promoted to core in 1.1
and 1.2. This commit implements the new property queries and makes all
of the corresponding extension queries map to them.

Reviewed-by: Iván Briano <ivan.briano@intel.com>

anv: Implement the new core version feature queries

Vulkan 1.2 introduces some new structures to get the properties and
features of a device from extensions that were promoted to core in 1.1
and 1.2. This commit implements the new feature queries and makes all
of the corresponding extension queries map to them.

Reviewed-by: Iván Briano <ivan.briano@intel.com>

anv,nir: Lower quad_broadcast with dynamic index in NIR

This is required for the subgroupBroadcastDynamicId feature that was
added in Vulkan 1.2.

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

anv: Bump the patch version to 131

vulkan/overlay: Fix for Vulkan 1.2

v2 (Jason Ekstrand):
- Add duplicate hooks for both the 1.2 and KHR versions of
vkCmdDraw[Indexed]IndirectCount.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

turnip: Pretend to support Vulkan 1.2

It doesn't really support any Vulkan properly yet so why not claim 1.2?
This was an easier way of fixing the build than trying to roll it
forward to a later version of ANV's entrypoint generator scripts.

vulkan: Update the XML and headers to 1.2.131

Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

gitlab-ci: Stop using manual jobs for merge requests

They were causing trouble with Marge Bot: The project settings require
that the pipeline succeeds before a merge request (MR) can be merged,
otherwise Marge doesn't wait for the pipeline to succeed before merging
an MR assigned to her. But Marge can't start manual jobs, so she would
always time out waiting for pipelines with manual jobs.

To avoid this, use these rules:
* Run the pipeline by default for MRs and main project branches changing
  any files affecting it.
* For other MRs, run a single dummy job which always succeeds.
* Don't run any jobs for main project branch changes (e.g. from an MR
  having been merged) not affecting the pipeline.
* Allow jobs to be started manually on branches of forked projects, as
  before.

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3361>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3361>

radeonsi: drop the negation from fmask_is_not_identity

This change eases code reading ("fmask_is_identity = true" is clearer than
"fmask_is_not_identity = false").
Initialization is not changed so fmask_is_identity is false when a texture is
created.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3174>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3174>

radeonsi: unbind image before compute clear

It's not used and avoid infinite recursion when used from si_compute_expand_fmask

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3174>

radeonsi: make sure fmask expand is done if needed

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2248
Fixes: 095a58204d9 ("radeonsi: expand FMASK before MSAA image stores are used")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3174>

radeonsi: fix fmask expand compute shader

'coord' variable was using TGSI_WRITEMASK_XYZ so subsequent uses of
TGSI_WRITEMASK_W were dropped.
The result for a 2 samples program was:

  0: UMAD TEMP[0].xy, SV[1].xyyy, IMM[0].xxxx, SV[0].xyyy
  1: STORE IMAGE[0], TEMP[0], TEMP[1], RESTRICT, 2D_MSAA
  2: STORE IMAGE[0], TEMP[0], TEMP[2], RESTRICT, 2D_MSAA
  3: END

instead of the expected:

  0: UMAD TEMP[0].xy, SV[1].xyyy, IMM[0].xxxx, SV[0].xyyy
  1: MOV TEMP[0].w, IMM[0].yyyy
  2: LOAD TEMP[1], IMAGE[0], TEMP[0], RESTRICT, 2D_MSAA
  3: MOV TEMP[0].w, IMM[0].zzzz
  4: LOAD TEMP[2], IMAGE[0], TEMP[0], RESTRICT, 2D_MSAA
  5: MOV TEMP[0].w, IMM[0].yyyy
  6: STORE IMAGE[0], TEMP[0], TEMP[1], RESTRICT, 2D_MSAA
  7: MOV TEMP[0].w, IMM[0].zzzz
  8: STORE IMAGE[0], TEMP[0], TEMP[2], RESTRICT, 2D_MSAA
  9: END

This fixes half of https://gitlab.freedesktop.org/mesa/mesa/issues/2248

Fixes: 095a58204d9 ("radeonsi: expand FMASK before MSAA image stores are used")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3174>

egl/android: Restrict minimum triple buffering for android color_buffers

The patch restricts triple buffering as minimum at driver for android
color_buffers in order to fix onscreen performance hit for T-Rex and
Manhattan.

v2: Update min_buffer check condition (Tapani Pälli)
v3: further code cleanup (Eric Engestrom)

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2332
Fixes: 0661c357c60 ("egl/android: Update color_buffers querying for buffer age")
Signed-off-by: Nataraj Deshpande <nataraj.deshpande@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3384>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3384>