board/pc: use frame pointer unwinder in linux.config

The default ORC unwinder requires libelf to be built. While we could
build libelf using BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF, we probably
don't really need the ORC unwinder in the PC defconfigs, so let's use
the frame pointer unwinder instead.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/123771107

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/orangepi_zero_plus2: U-Boot needs pylibfdt

When building U-Boot for this platform:

unable to execute 'swig': No such file or directory
error: command 'swig' failed with exit status 1
scripts/dtc/pylibfdt/Makefile:26: recipe for target 'scripts/dtc/pylibfdt/_libfdt.so' failed

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/123771103

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/olimex_a20_olinuxino_lime_legacy: use gcc 6.x and not the default version

The old 3.4 Linux kernel used by this defconfig doesn't build with gcc 7.x:

include/linux/compiler-gcc.h:106:1: fatal error: linux/compiler-gcc7.h: No such file or directory

So let's use gcc 6.x for the time being.

Long term, we should use a newer or different kernel source for this
defconfig, or get rid of the defconfig entirely if there's no updated
kernel with a fix.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/123771091

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/armadeus_apf27: fix U-Boot configuration

The U-Boot part of the defconfig was not specifying explicitly any
U-Boot version. Since commit 21e3ae8a18bb77943c0a2492ab9ebf14cab333f9
("boot/uboot: default to kconfig buildsystem for latest version"), we
default to using the kconfig build system when the default U-Boot
version is used. Following this change, the apf27 defconfig therefore
started using kconfig, for which the BR2_TARGET_UBOOT_BOARDNAME
Config.in option is not used. Due to this, the build fails with:

boot/uboot/uboot.mk:411: *** No board defconfig name specified, check your BR2_TARGET_UBOOT_BOARD_DEFCONFIG setting.  Stop.

Indeed, when Kconfig is used, the board defconfig must be specified
with BR2_TARGET_UBOOT_BOARD_DEFCONFIG.

As part of fixing this, we also set a fixed U-Boot version for this
defconfig, like we do in all other defconfigs.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/123771003

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/cubieboard2: U-Boot needs pylibfdt

When building U-Boot for this platform:

unable to execute 'swig': No such file or directory
error: command 'swig' failed with exit status 1
scripts/dtc/pylibfdt/Makefile:27: recipe for target 'scripts/dtc/pylibfdt/_libfdt.so' failed

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/123771048

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/imx6-sabresd_qt5: add missing dependency on host-openssl

host-openssl is needed to build the Linux kernel. This is the same
issue that was fixed in commit
5dac3b9b8d72ea2b4aa264bfaa54e41f32595009 ("configs/imx6-sabresd: needs
host-openssl for the Linux kernel build") for the minimal defconfig
for the same board.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/123771070

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/imx6sabre: Create distinct pre-processed mkimage config files

Commit 0c4bccf9e882 ("configs/imxsabre: Fix U-Boot parallel build issue")
tried to fix the parallel build issue, but the real fix was developed
later by Trent Piepho later, so add such commit to fix Buildroot
build failures on rel_imx_4.9.x_1.0.0_ga NXP branch.

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/123771053
https://gitlab.com/buildroot.org/buildroot/-/jobs/123771054
https://gitlab.com/buildroot.org/buildroot/-/jobs/123771055

Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/systemd: needs glibc

Since version v239, systemd-nspawn unconditioanlly uses prlimit(2),
which is not implemented in uClibc-ng. systemd-nspawn can not be
disabled.

This makes systemd glibc-only again.

After a bit of discussion with upstream (om IRC), it looks very
improbable that they accept a patch making systemd-nspawn optional.
They would probably consider a patch that provides that syscall wrapper
if it is missing, though, but that's less trivial...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mtd: fix build on riscv

Define _REENTRANT otherwise pthread detection will fail

Fixes:
 - http://autobuild.buildroot.org/results/b0e7978a997a2aae383161455b5d898b8c28e2e1

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gauche: fix parallel build

Add a patch to fix parallel build issue on ext/rfc

Fixes:
 - http://autobuild.buildroot.org/results/f4935e29ce6aaebdaa47d46c56120b7e97145d1b

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

motion: fix static build with webp

Static build with webp fails because webp is put before webpmux

Fixes:
 - http://autobuild.buildroot.org/results/4d4e72808300ba1ff79ca794930112b554eb2533

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Update for 2018.11-rc2

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fs/tar: add support for xattrs (thus capabilties)

By default, tar will not include any extended attribute (xattr) when
creating archives, and thus will not store capabilties either (as they
are stored in the xattr 'security.capability').

Using option --xattrs is enough to create a tarball with all the xattrs
attached to a file. However, extracting all xattrs from a tarball
requires that --xattrs-include='*' be used. This is not symetric (but on
purpose, as per the documentation), and so is confusing to some.

So, we use --xattrs-include='*' to create the archive, so as to be
explicit that we want all xattrs to be stored.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libcorrect: fix debug build

Add a patch to use -fsanitize=address only when available

Fixes:
 - http://autobuild.buildroot.net/results/221d6a418e75b39fe645c3a56cee676518d2cff6

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

weston: egl support needs egl glesv2

Fixes:
 - http://autobuild.buildroot.org/results/95db3f4ad4c7ae866b7db4431293c26faa5c1dfc

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/netplug: fix quoting of ${NETWORKING} in init script

Since 4adaa581b27dc27298eb7cc421ee8f530f88e18e, S29netplug looks for
/etc/default/network instead of /etc/sysconfig/network.  When this
file exists but does not define $NETWORKING, the script fails on line
29 with something like:

/etc/init.d/S29netplug: 29: [: =: unexpected operator

Fix quoting so this error no longer happens.

Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
[Thomas: keep double quotes around "no", keep curly braces when
referencing the variable.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

make: configure host-make with host- prefix

Fixes:
http://autobuild.buildroot.net/results/e29/e293aadc692d2ed337881ef2172ddf66a60bc05c/

And many more.

Install as 'host-make' rather than just 'make', as that otherwise confuses a
number of packages when they invoke recursive / sub-make.  The internal job
control logic of GNU make is version dependant, so mixing versions may lead
to issues like:

make[1]: Entering directory `/home/peko/autobuild/instance-0/output/build/boa-0.94.14rc21'
(cd src && make -w --jobserver-fds=5,6 -j)
make: unrecognized option '--jobserver-fds=5,6'

With this rename, only packages explicitly opting in for our host-make
(using the BR2_MAKE / BR2_MAKE_HOST_DEPENDENCY logic) will use it.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

make: drop gnumake/gmake aliases for host-make

Now that glibc no longer checks for gnumake / gmake, these aliases can be
removed.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

glibc: ensure BR2_MAKE is also used for subdirs

The configure script contains logic to figure out what make program to
invoke for subdirectories (trying gnumake, gmake, make).  Explicitly force
it to use our BR2_MAKE to ensure the right make version is used.

As GLIBC_CONF_ENV is only initialized below, move this section below it.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libnftnl: drop useless BR2_PACKAGE_LIBNFTNL_XML

Commit fa0d1ebff99 (libnftnl: bump to version 1.0.9) removed the mxml
dependency. Remove the redundant BR2_PACKAGE_LIBNFTNL_XML config symbol
as well.

Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/syslinux: fix build with glibc 2.28+

When building with glibc 2.28+, the "major", "minor" and "makedev"
functions are defined in "sys/sysmacros.h". This commit backports
upstream commit 1a74985b2a404639b08882c57f3147229605dfd5 to fix the
build with glibc 2.28.

Link: https://www.syslinux.org/wiki/index.php?title=Building
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pkg-generic.mk: fix show-build-order stdout pollution

The commands like "make show-build-order" or "make
<package>-show-build-order" show the build order and then print
"make[1]: Nothing to be done for 'show-build-order'" to stdout. It
pollutes output. Technically this message is true but it's not true
for user because he gets an information.

The <package>-show-build-order targets use $(info) for package name
printing.  The make utility doesn't consider the internal directive as
a command so it think that it's "Nothing to be done". The patch adds
the empty command to <package>-show-build-order to inform make utility
that taget makes some real actions.

Signed-off-by: Serj Kalichev <serj.kalichev@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: invert $(info) and @:, as suggested by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

vtun: remove reference to start-stop-daemon from package help

None of the other 82 packages that use start-stop-daemon does this.

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/luvi: add patch to fix build issue

Since bumping luv from version 1.9.1 to 1.22.0, building luvi fails, as
"luv.h" now includes "compat-5.3.h", which is locally shipped as a
dependency to lua-compat-5.3.

Fixing the issue reveals, that luvi is using `luaL_newlib` which is not
available in the Lua 5.1 API. Building luvi with luv 1.9.1 was not an
issue before, because luv 1.9.1 defined `luaL_newlib` in luv.h, which
was removed in 1.22.0 in favour of using lua-compat-5.3.

Therefore, add a patch which defines `luaL_newlib` in luvi.h.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/luv: add patch to fix build issue with luvi

Add a patch to fix a build issue with luvi after bumping luv from
version 1.9.1 to 1.22.0.

The problem is that luv now uses lua-compat-5.3 instead of defining the
Lua 5.3 API itself. Unfortunately, luv.h now includes compat-5.3.h in the
header file, which causes the build issue with luvi, as luvi does not
find this local header file. Note, that luv ships lua-compat-5.3 as a
dependency.

Therefore, the patch includes compat-5.3.h in the source file luv.c, so
it isn't exposed to external programs.

Fixes:
http://autobuild.buildroot.net/results/2244cd30986aff29b763fb7183f6fc27a82bd7fa
http://autobuild.buildroot.net/results/01938f7f018dc69d564c22489933647b1daf62f3
http://autobuild.buildroot.net/results/8217e863c2776d299cb90b90f1a2ed8233ec82ba
.. and many more

Note, that fixing this issue reveals another issue in luvi, which is
fixed by the follow up patch.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

ltp-testsuite: update patch filename

The patch 0007-Disable-DES-authentification-support.patch has been
renamed to 0005-Disable-DES-authentification-support.patch.

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/webkitgtk: use proper USE_WOFF2 flag instead of ENABLE_WOFF2

Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

flare-engine: fix debug build

If BR2_ENABLE_DEBUG is set, use RelWithDebInfo instead of default Debug
as Debug will add -pg (gprof) which is not always available on toolchain

Fixes:
 - http://autobuild.buildroot.org/results/a12ae622a44bbe025c3a8b7e8e4c253b52927ae8

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rpm: really take DEPENDENCIES into account

Commit e7af4033c32560594ddbd457b68f6d3713662a26 ("rpm: use the new
gettext logic") introduced a really nasty bug: by adding
$(TARGET_NLS_DEPENDENCIES) to RPM_DEPENDENCIES, it completely
overwrote the existing value of RPM_DEPENDENCIES, entirely masking all
mandatory RPM dependencies.

rpm is fairly towards the end of the alphabet, and most other
mandatory dependencies (berkeleydb, host-pkgconf, file and popt)
appear earlier by alphabetic ordering. Only zlib was afterwards, but
since file depends on zlib, it was always built before. This probably
explains why our autobuilders haven't encountered a single build
failure.

However, a simple "make rpm" clearly exhibits the failure, and
obviously the upcoming per-package folder mechanism makes such bugs
even more obvious.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/xen: Bump Xen to 4.11.0 and backport a fix

Bump the Xen package to the latest release and backport a fix from the
Xen master brach.

This fixes autobuilder issue:
http://autobuild.buildroot.net/results/6e0d8e962e861a32f5bf2e5031ef51c25768f1f6/

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imx-uuc: install ufb

The bump to 79e9798eee9cd972d92ed2b18f170de856d153c9 added the new ufb
daemon through the following commit:
https://github.com/NXPmicro/imx-uuc/commit/ce808f3010ec73ccc07775c6cfd5317807a22415

So install ufb on target

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imx-uuc: needs headers >= 3.18

The bump to 79e9798eee9cd972d92ed2b18f170de856d153c9 added the following
commit:
https://github.com/NXPmicro/imx-uuc/commit/ce808f3010ec73ccc07775c6cfd5317807a22415

This new ufb daemon uses usb_functionfs_descs_head_v2 which is available
only since 3.18:
https://github.com/torvalds/linux/commit/1df22b4ea9d91b01267fb61c155c31fb65d6b8a0

So add a dependency on headers >= 3.18

Fixes:
 - http://autobuild.buildroot.org/results/1081062b1c32c44a9feb5b14288095bc72d15986

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wireshark: fix static build with snappy

Fixes:
 - http://autobuild.buildroot.org/results/9089e74c0f8428d28953ae037a84aa8a08db7ded

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc: Get rid of stale UCLIBC_INSTALL_LDSO_SYMLINKS

UCLIBC_INSTALL_LDSO_SYMLINKS is not defined anywhere to nuke it.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc-ng-test: fix build with glibc 2.28

Since glibc 2.28
(https://savannah.gnu.org/forum/forum.php?forum_id=9205), the obsolete
functions encrypt, encrypt_r, setkey, setkey_r, cbc_crypt, ecb_crypt,
and des_setparity are no longer available to newly linked binaries, and
the headers <rpc/des_crypt.h> and <rpc/rpc_des.h> are no longer
installed. These functions encrypted and decrypted data with the DES
block cipher, which is no longer considered secure. Software that still
uses these functions should switch to a modern cryptography library,
such as libgcrypt.

So add a NO_CRYPT variable to disable test/crypt

Fixes:
 - http://autobuild.buildroot.org/results/158438debb0ce313b012b871e199bed42ba38294

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

core: ensure we use the realpath(3) of DL_DIR

When $(TOPDIR)/dl is a symlink, checking out git submodules can fail,
as reported by Michael in #11086.

To reproduce a similarly-related mis-behaviour:

    $ mkdir -p foo/bar foo/buz
    $ cd foo/bar
    $ ln -s ../buz meh
    $ cd meh
    $ cd ../../foo

The last command should not succeed, because, relative to meh, there is
no ../../foo directory; we would expect it to be ../../../foo, instead.
But since meh is a symlink to a directory, then a relative path from that
symlink is interpreted as relative to the derefrenced directory, i.e.
from buz in this case.

But where this gets even weirder, is that, if the last command is
replaced by:

    $ cd ../../../foo

then it still works, too.

And that is the root of Michael's issue: the dl directory in Buildroot's
TOPDIR is a symlink to a similarly-named directory one directory higher,
which then confuses relative paths, which gets especially and noticeably
bad for git submodules.

Avoid this strangeness, and just use so-called "physical" path, i.e. a
path where all symlinks to directories have been dereferenced.

Fixes: #11086
Reported-by: Michael Nosthoff <posted@heine.so>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Michael Nosthoff <posted@heine.so>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libv4l: v4l2-compliance needs fork

Since bump to 1.16.2, v4l2-compliance uses fork, see:
https://git.linuxtv.org/v4l-utils.git/commit/utils/v4l2-compliance/?id=79d98edd1a27233667a6bc38d3d7f8958c2ec02c

So add a patch to disable v4l2-compliance if fork is unavailable

Fixes:
 - http://autobuild.buildroot.org/results/447d792ce21c0e33a36ca9384fee46e099435ed8

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

flatcc: fix debug build

flatcc is named flatcc_d if BR2_ENABLE_DEBUG is set because of the
following line in CMakeLists.txt: set(CMAKE_DEBUG_POSTFIX "_d")

So update FLATCC_TARGET_REMOVE_FLATCC_COMPILER hook to replace flatcc
by flatcc*

Fixes:
 - http://autobuild.buildroot.org/results/a47f49cd2fdd809257bd7e83dca620f2e6aac85b

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sconeserver: needs zlib

Since bump to 6b932d7d8dbb700b830205e7111e469cefff490c and
https://github.com/sconemad/sconeserver/commit/34b01e9d332f912da82ab1c09529a33969ff6ebb,
sconeserver needs zlib so select it

Fixes:
 - http://autobuild.buildroot.org/results/b5e2b8635b37e6f2803a6031b154cf67685a4221

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

prosody: security bump to version 0.10.2

This fixes a cross-host authentication vulnerability, CVE-2018-10847.
The issue affects Prosody instances that have multiple virtual hosts
(including anonymous authenticated hosts):
https://blog.prosody.im/prosody-0-10-2-security-release

A full security advisory is available at
https://prosody.im/security/advisory_20180531

Compute hashes locally as they are no more available on
https://prosody.im/downloads/source/{MD5,SHA1,SHA256,SHA512}SUMS

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fs/common.mk: Fix show-build-order

The command "make show-build-order" doesn't show dependencies of rootfs-common target.

This patch adds $(ROOTFS_COMMON_DEPENDENCIES) to PACKAGES variable.

Signed-off-by: Serj Kalichev <serj.kalichev@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

utils/genrandconfig: add missing new line when creating the configuration

When adding the custom BR2_WGET value in the configuration,
genrandconfig forgets to add a newline. Due to this, the next option
that is added is printed on the same line as BR2_WGET="", which causes
it to be ignored.

Due to this, in all builds, the line right after BR2_WGET was
ignored. It could have been BR2_ENABLE_DEBUG, BR2_INIT_BUSYBOX,
BR2_INIT_SYSTEMD, BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV,
BR2_STATIC_LIBS or BR2_PACKAGE_PYTHON_PY_ONLY depending on the
randomization.

Fix that by adding a proper newline at the end of the BR2_WGET option.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gstreamer: fix build on riscv

RISC-V supports unaligned accesses, but these might run extremely slowly
depending on the implementation so set as_cv_unaligned_access to no on
this architecture, see:
https://gitlab.freedesktop.org/gstreamer/gstreamer/commit/8a156d1725ecd03f2e8cdc8874e081dda2d3b43d

Fixes:
 - http://autobuild.buildroot.org/results/dca32c929350311fca1a85e251d318b43c4a3177

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

easydbus: fix build without C++

Specify that easydbus is a C project file otherwise build will fail if
no C++ compiler is found by cmake

Fixes:
 - http://autobuild.buildroot.org/results/486c3cd98124e7415dee2fd1463bd5e0fcc9ba91

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/openocd: add missing host-pkgconf dependency

The configure.ac script uses PKG_CHECK_MODULES(), and we autoreconf
the package, so host-pkgconf should be listed in the dependencies.

This issue is seen either with per-package folders, or by doing a
clean build with just "make openocd":

>>> openocd 0.10.0 Configuring
>>> openocd 0.10.0 Autoreconfiguring
[...]
configure.ac:12: error: possibly undefined macro: AC_MSG_WARN
      If this token and others are legitimate, please use m4_pattern_allow.
      See the Autoconf documentation.
configure.ac:201: error: possibly undefined macro: AC_DEFINE
configure.ac:582: error: possibly undefined macro: AC_MSG_NOTICE

Even if the message seems unrelated, it's really the lack of pkg.m4
from host-pkgconf that causes the issue.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libassuan: fixup libassuan-config

The libassuan library installs libassuan-config, but it is not
currently fixed up by our <pkg>_CONFIG_SCRIPTS logic. While this
doesn't cause any problem today, it fails badly with per-package
folders, so let's use <pkg>_CONFIG_SCRIPTS.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libv4l: bump version to 1.16.2

- changes since 1.16.1
  0f68a3f6 configure: build without BPF support in ir-keytable
  5f8bd4e8 keytable: fix compilation warning
  f735bee7 keytable: fix BPF protocol compilation on mips
  c393c3bc Prepare for 1.16.2 release

- use new '--disable-bpf' option instead of ac_cv_prog_CLANG
  to disable BPF support, fixes [1]:

  bpf.c:48:4: error: #error __NR_bpf not defined. libbpf does not support your arch.

- remove upstream denied patch (see [2]) fixing part of the BPF support
  for older toolchains

[1] http://autobuild.buildroot.net/results/32b8f63e84616f91b645230e889eb1518972a398
[2] https://www.spinics.net/lists/linux-media/msg142729.html

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libsigsegv: add RISC-V support

This commit backports an upstream commit adding RISC-V support to
libsigsegv, and adds a patch that finalizes the RISC-V support to make
it compatible with cross-compilation.

Fixes:

  http://autobuild.buildroot.net/results/bd12cb3db3b46860a4ab8fb91052319dce75202a/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dt-utils: fix hash

Hash has been reported as wrong by autobuilder since August 16th
Perhaps, it was wrong since bump to v2018.05.0 on August 9th

Fixes:
 - http://autobuild.buildroot.org/results/c6c8ede30623cc20011916cc95dbdae34dcc0344

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

shadowsocks-libev: fix build on riscv

Define _REENTRANT otherwise pthread detection will fail

Fixes:
 - http://autobuild.buildroot.org/results/c5406206190b46e15d35d05c5ed026ee7632f5b1

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

imx-uuc: bump revision to 79e9798e to fix glibc 2.28 build

Main changes:
- fix build error with glibc 2.28
- re-factor the code
- use unique CPU ID when available
- improve UDC management

Fixes:
http://autobuild.buildroot.net/results/b39d56c1573308c4f947de23363da7c05e2aaf0d/

Also switch back the repository from codeauroraforum to NXPmicro now
that the Qualcomm/NXP merger was denied.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libsemanage: define installation location of semanage.conf for host

When /etc/selinux/semanage.conf does not exist, libsemanage tries to
overwrite it. For the target package, it works fine because $(DESTDIR)
is taken into account.

However, for the host package, $(DESTDIR) is empty, and the location
used for /etc/selinux/semanage.conf is not affected by $(PREFIX). This
causes host-libsemanage to try to install /etc/selinux/semanage.conf,
which obviously fails with:

  test -f /etc/selinux/semanage.conf || install -m 644 -D semanage.conf /etc/selinux/semanage.conf
  install: cannot create directory '/etc/selinux': Permission denied

To fix this, this commit passes DEFAULT_SEMANAGE_CONF_LOCATION in the
make options when building/installing host-libsemanage, providing a
path to semanage.conf that Buildroot can write to.

Fixes:

  http://autobuild.buildroot.net/results/cd27e3c66274622d0c3dd5a601a36efb1bc45011/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xlib_libfontenc: add missing dependency on host-pkgconf

The xlib_libfontenc configure.ac uses PKG_CHECK_MODULES(), but the
Buildroot package does not have a dependency on host-pkgconf. This
causes a build failure with per-package host/target folders, or if one
builds just with "make xlib_libfontenc", which is why it was never
detected by the autobuilders.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

elfutils: security bump to version 0.174

Fixes the following security issues:

CVE-2018-16062: dwarf_getaranges in dwarf_getaranges.c in libdw in elfutils
before 2018-08-18 allows remote attackers to cause a denial of service
(heap-based buffer over-read) via a crafted file.

CVE-2018-16402: libelf/elf_end.c in elfutils 0.173 allows remote attackers
to cause a denial of service (double free and application crash) or possibly
have unspecified other impact because it tries to decompress twice.

CVE-2018-16403: libdw in elfutils 0.173 checks the end of the attributes
list incorrectly in dwarf_getabbrev in dwarf_getabbrev.c and dwarf_hasattr
in dwarf_hasattr.c, leading to a heap-based buffer over-read and an
application crash.

For more details, see the announcement:
https://sourceware.org/ml/elfutils-devel/2018-q3/msg00116.html

0.172 and 0.173 also included fixes for crashes and hangs found by afl-fuzz
(no CVEs assigned):
https://sourceware.org/ml/elfutils-devel/2018-q2/msg00272.html
https://sourceware.org/ml/elfutils-devel/2018-q2/msg00209.html

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libnss: security bump to version 3.39

Fixes the following security issue:

CVE-2018-12384: NSS responded to an SSLv2-compatible ClientHello with a
ServerHello that had an all-zero random.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libnspr: fix nios2 and microblaze support patches

Commit c9e3d5b6c57 (libnspr: bump to version 4.20) did not refresh the
hunks touching the _linux.cfg file. As a result, these hunk were applied
to the wrong (x86 specific) place in that file, rendering them
ineffective. Refresh the patches to fix that.

Fixes:
http://autobuild.buildroot.net/results/2d1/2d1288e98a6459d84c2599c99b5617a2fde81f62/

Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fs: don't use an intermediate tarball

Since 118534fe54b (fs: use a common tarball as base for the other
filesystems), the filesystem creation is split in two steps, using an
intermediate tarball to carry the generic, common finalisations to the
per-filesystem finalisation and image creation.

However, this intermediate tarball causes an issue with capabilities:
they are entirely missing in the generated filesystems.

Capabilities are stored in the extended attribute security.capability,
which tar by default will not store/restore, unless explicitly told to,
e.g. with --xattrs-include='*', which we don't pass.

Now, passing this option when creating and extracting the intermediate
tarball, both done under fakeroot, will cause fakeroot to report an
invalid filetype for files with capabilities. mksquashfs would report
such unknown files as a warning, while mkfs.ext2 would fail (with a
similar error message), e.g.:

    File [...]/usr/sbin/getcap has unrecognised filetype 0, ignoring

This is due to a poor interaction between tar and fakeroot; running as
root the exact same commands we run under fakeroot, works as expected.
Unfortunately, short of fixing fakeroot (which would first require
understanding the problem in there), we don't have much options.

The intermediate tarball was made to avoid redoing the same actions over
and over again for each filesystem to build. However, most of the time,
only one or two such filesystems would be enabled [0], and those actions
are usually pretty lightweight. So, using an intermediate tarball does
not provide a big optimisation.

The main reason to introduce the intermediate tarball, however, is that
it allows to postpone per-filesystem finalisations to be applied only
for the corresponding filesystem, not for all of them.

So, we get rid of the intermediate tarball, and simply move all of the
code to run under fakeroot to the per-filesystem fakeroot script.
Instead of extracting the intermediate tarball, we just rsync the
original target/ directory, and apply the filesystem finalisations on
that copy. The only thing still done in the rootfs-common step is to
generate the intermediate files (users file, devices file) that are used
in the fakeroot script.

Fixes: https://bugs.busybox.net/show_bug.cgi?id=11216
Note: an alternate solution would have been to keep the intermediate
tarball to keep most of the common finalisations, and move only the
permissions to each filesystem, but that was getting a bit more complex
and changed the ordering of permissions and post-fakeroot scripts. Once
we bite the bullet of having some common finalisation done in each
filesystem, it's easier to just move all of them.

[0] Most probsably, users would enable the real filesystem to put on
their device, plus the 'tar' filesystem, to be able to easily inspect
the content on their development machine.

Reported-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

gstreamer1: fix riscv64 compile

Add upstream patch [1]:

  gstconfig.h.in: initial RISC-V support

Fixes [2]:

  ../gst/gstconfig.h:112:4: error: #error "Could not detect architecture; don't know whether it supports unaligned access! Please file a bug."

[1] https://gitlab.freedesktop.org/gstreamer/gstreamer/commit/8a156d1725ecd03f2e8cdc8874e081dda2d3b43d
[2] http://autobuild.buildroot.net/results/07efafadff75ae2fb1d2b8d420be72345906af6c

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libnspr: bump to version 4.20

Support for riscv was added in this version

Fixes:
 - http://autobuild.buildroot.org/results/a98db13ea105d627f2a4770969b31550926c2791

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

{linux, linux-headers}: bump 4.{4, 9, 14, 18}.x series

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

supertuxkart: fix build on bdver3

Retrieve upstream patch to fix build failure in
lib/graphics_utils/mipmap/cpusimd.h due to direct inclusion of
intrinsics headers:
https://github.com/supertuxkart/stk-code/issues/3091

Fixes:
 - http://autobuild.buildroot.org/results/52bd5c45b0d04a863a2530d388899b3e46494ee9

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libkrb5: fix build on riscv

Define _REENTRANT otherwise pthread detection will fail

Fixes:
 - http://autobuild.buildroot.org/results/39a51d0c3feab74edd8a17c9174d031ccc7ffe1d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libmicrohttpd: fix build on riscv

Define _REENTRANT like already done for ARC otherwise pthread detection
will fail

Fixes:
 - https://autobuild.buildroot.org/results/910dc7164312637bf4dcd89e4cb476ae198466c8

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/systemd: explicitly configure split-usr=false and split-bin=true

meson-based build of systemd runs a couple of checks on the structure
of the *host* system which will incorrectly configure systemd if build
host configuration doesn't match Buildroot target.

One can also find the following in the NEWS file:

* A new -Dsplit-bin= build configuration switch may be used to specify
  whether bin and sbin directories are merged, or if they should be
  included separately in $PATH and various listings of executable
  directories. The build configuration scripts will try to autodetect
  the proper values of -Dsplit-usr= and -Dsplit-bin= based on build
  system, but distributions are encouraged to configure this
  explicitly.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

wireshark: fix static build

Don't give a path in --with-pcap option otherwise PCAP_CONFIG won't be
used (see AC_WIRESHARK_PCAP_CHECK in acinclude.m4) to retrieve pcap
static dependencies such as -lnl-3 and as a result pcap detection will
fail

Fixes:
 - http://autobuild.buildroot.org/results/084354a33825cf4e723e0a9f1e9656ad2a212a15

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ncmpc: disable documentation

Fixes:
 - http://autobuild.buildroot.org/results/4822b195628b3ce0d3fd6428bcba2cca158e92be

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

trace-cmd: fix site

Replace $(BR2_KERNEL_MIRROR) by https://git.kernel.org/pub, which
fixes the download of this package:

>>> trace-cmd trace-cmd-v2.6.1 Downloading
Initialized empty Git repository in /home/thomas/dl/trace-cmd/git/.git/
Fetching all references
fatal: repository 'https://cdn.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git/' not found
Detected a corrupted git cache.
Removing it and starting afresh.
Initialized empty Git repository in /home/thomas/dl/trace-cmd/git/.git/
Fetching all references
fatal: repository 'https://cdn.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git/' not found
Detected a corrupted git cache.
This is the second time in a row; bailing out
--2018-11-11 21:08:00--  http://sources.buildroot.net/trace-cmd/trace-cmd-trace-cmd-v2.6.1.tar.gz
Resolving sources.buildroot.net (sources.buildroot.net)... 104.25.210.19, 104.25.211.19, 2606:4700:20::6819:d313, ...
Connecting to sources.buildroot.net (sources.buildroot.net)|104.25.210.19|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1859835 (1.8M) [application/x-gtar-compressed]

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

qemu: disable opengl

Since version 0.15.0, qemu has an optional dependency to opengl:
https://github.com/qemu/qemu/commit/20ff075bb3340c5278a0da38ad1f4d602565aa06

Since version 2.4, libepoxy is also needed to enable opengl:
https://github.com/qemu/qemu/commit/dcf30025c3e3d43140a687240433de1920adf8b0

As a result if libepoxy is built before qemu, opengl support will be
detected (see config.log):
OpenGL support    yes
OpenGL dmabufs    yes

This will raise the failures in milkymist-tmu2:
hw/display/milkymist-tmu2.c:35:22: fatal error: X11/Xlib.h: No such file or directory

or in sdl2:
  CC      /home/peko/autobuild/instance-0/output/targetui/sdl2-2d.o
In file included from /home/peko/autobuild/instance-0/output/build/qemu-2.12.1/include/ui/egl-context.h:5:0,
                 from ui/egl-context.c:3:
/home/peko/autobuild/instance-0/output/build/qemu-2.12.1/include/ui/egl-helpers.h:45:55: error: unknown type name 'Window'; did you mean 'minor'?

or in translate-a64:
/accts/mlweber1/scripts/instance-3/output/build/qemu-2.12.1/target/arm/translate-a64.c: In function 'handle_shri_with_rndacc':
/accts/mlweber1/scripts/instance-3/output/build/qemu-2.12.1/target/arm/translate-a64.c:7000:28: warning: 'tcg_src_hi' may be used uninitialized in this function [-Wmaybe-uninitialized]
             tcg_gen_mov_i64(tcg_src, tcg_src_hi);
                            ^
../ui/gtk-egl.o: In function `gd_egl_init':
/accts/mlweber1/scripts/instance-3/output/build/qemu-2.12.1/ui/gtk-egl.c:52: undefined reference to `gdk_x11_window_get_xid'

So, for the time being, disable opengl as done in xen since commit
13c6754f3c1d2a14516f641490e9dd6f4c183d7c.

Fixes:
 - http://autobuild.buildroot.org/results/656e45721c72197834462eb2bd8c762e520725a4
 - http://autobuild.buildroot.org/results/d4736a930144fc5e25b377bc1c0baf44fbf8718d
 - http://autobuild.buildroot.org/results/50e0d7d1b4f5c2b827b50bb82d8fbc066bf31118

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libiscsi: fix build failures due to warnings

Retrieve two upstream patches to fix build failures due to warnings

Fixes:
 - http://autobuild.buildroot.org/results/7ec1e1cc060bbdaaf758c0d55a053247b731e792

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/website/news.html: update for 2018.11-rc1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2018.11-rc1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: add additional resolved issues since 2018.08

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: add recent changes

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libmpdclient: bump to version 2.16

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mpd-mpc: bump to version 0.31

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mpd: bump to version 0.20.23

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/meson: bump to version 0.47.2

Note, that there is already a patch [1] to bump the version to 0.48.1.
However, the bump to version 0.48.x has some unresolved issues.

In the meantime, until the issue with 0.48 is resolved, bump to latest
version of the 0.47 branch.

[1] http://patchwork.ozlabs.org/patch/986260/

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

valgrind: disable for mips64r6/mips64elr6

Fixes [1]:

  /tmp/ccBAUqbI.s: Assembler messages:
  /tmp/ccBAUqbI.s:622: Error: opcode not supported on this processor: mips64r6 (mips64r6) `movn $2,$4,$7'
  /tmp/ccBAUqbI.s:2607: Error: opcode not supported on this processor: mips64r6 (mips64r6) `movn $2,$4,$7'

[1] http://autobuild.buildroot.net/results/dc52088222e9fbedcebffc1c39be6d2fecfffe5d

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-mwclient: bump version to 0.9.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libffi: bump to version 3.3-rc0

- Update site to github (for the time being, as 3.3-rc0 is a release
  candidate, it is not published on the official ftp)
- Update third patch
- Remove fourth and fifth patches (already in version)
- Remove uneeded hooks, as public headers are now installed in the
  standard path since
  https://github.com/libffi/libffi/commit/982b89c01aca99c7bc229914fc1521f96930919b
- New risc-v support:
  https://github.com/libffi/libffi/commit/3840d49aaa831d649b1597518a2903dfed0d57f3

Fixes:
 - http://autobuild.buildroot.org/results/3edf66362ea5a83291f19373e4b6f2e5cce98d7b

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sconeserver: bump version

https://github.com/sconemad/sconeserver/commit/6b932d7d8dbb700b830205e7111e469cefff490c
adds support for OpenSSL 1.1

Added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain/toolchain-buildroot: enable glibc for all little-endian ARCs with atomic ops

Initially we had a port only for ARCv2 cores but then with a simple
change ARCompact cores got supported as well.

So we generalize from BR2_archs to BR2_arcle as we haven't tried to
get glibc working on big-endian ARCs yet.

Also we never bothered to check avaialbility of atomic instructions in
the core but in case of Glibc for ARC this is really a must, so we add
this check here.

Note in case of uClibc we may have system w/o HW atomics but:

 1. Only single-core systems are allowed
 2. Atomic instructions are emulated via arc_usr_cmpxchg syscall

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libgpiod: bump version to v1.2

Release notes:
  https://git.kernel.org/pub/scm/libs/libgpiod/libgpiod.git/tree/NEWS?h=v1.2.x

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

squid: security bump to version 4.4

Fixes SQUID-2018_4:

Due to incorrect input handling, Squid is vulnerable to a Cross-Site
Scripting vulnerability when generating HTTPS response messages about TLS
errors.

For more details, see the advisory:

http://www.squid-cache.org/Advisories/SQUID-2018_4.txt

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libnfs: add patch to fix musl build issue

Add a patch to fix build issues with the musl C library.

This patch fixes an autobuild issue when linking the mpd package
against libnfs. The header file libnfs.h uses `struct timeval` which is
defined in `<sys/time.h>` for POSIX systems. Unfortunately, upstream
only includes it conditionally, based on the system. Therefore, we
remove the check in the first patch.

Reported upstream:
https://github.com/sahlberg/libnfs/issues/272

Fixes:
http://autobuild.buildroot.org/results/452/4522014698b9fe50720a71b663e47a75805bcf54
http://autobuild.buildroot.org/results/b0a/b0a0c20ad1705e9fa7ba4a12eb9c182e8077ab0c
http://autobuild.buildroot.org/results/53c/53c87361923cc177de7889523b3d16ba6b1d3d0f
.. and more.

Previous patch: Changes requested
http://patchwork.ozlabs.org/patch/973605/

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gcc: fix xtensa uclinux code generation

xtensa-uclinux uses bFLT executable file format that cannot relocate
fields representing offsets from data to code. C++ objects built as PIC
use offsets to encode FDE structures. As a result C++ exception handling
doesn't work correctly on xtensa-uclinux. Don't use PIC by default on
xtensa-uclinux.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

attr: Add a patch to fix an unconditional infinite recursion

The bump to 2.4.48 introduced a bug that, according to the author,
only happen in certain cases on glibc. But under uclibc-ng, it happens
every time.

The bug essentially cause any program calling any libattr.so function
to enter an infinite recursion, because of a symbol conflict between
uclibc-ng and libattr wrappers, that causes the libattr wrappers to
call themselves.

This infinite recursion does not consume the stack, so programs
basically behave like they enter an infinite loop.

It is easy to reproduce with qemu_arm_versatile_defconfig +
BR2_PACKAGE_ATTR: "getfattr ." never returns and takes 100% CPU.

Upstream fixed it, but the patch is not part of a release yet,
so take the patch.

Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

nginx: security bump to 1.15.6

Fixes the following security issues:

CVE-2018-16843: Excessive memory usage in HTTP/2

CVE-2018-16844: Excessive CPU usage in HTTP/2

CVE-2018-16845: Memory disclosure in the ngx_http_mp4_module

Refreshed patch 0004 + 0007 as they no longer applied cleanly.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mosquitto: security bump to version 1.5.4

>From the announcement:

When using a TLS enabled websockets listener with require_certificate
enabled, the mosquitto broker does not correctly verify client certificates.
This is now fixed.  All other security measures operate as expected, and in
particular non-websockets listeners are not affected by this.

https://mosquitto.org/blog/2018/11/version-154-released/

Drop patch 0001, now applied upstream:
https://github.com/eclipse/mosquitto/pull/933

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/testing/tests/fs/test_f2fs: fix flake8 warning

This commit fixes the following flake8 warnings:

support/testing/tests/fs/test_f2fs.py:6:1: E302 expected 2 blank lines, found 1
support/testing/tests/fs/test_f2fs.py:12:1: E302 expected 2 blank lines, found 1
support/testing/tests/fs/test_f2fs.py:38:23: E225 missing whitespace around operator

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

.gitlab-ci.yml: update after addition of TestF2FS test case

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

twolame: fix static linking with libmagic

libmagic (from file package) already provides the buffer_init function
so to avoid a build failure for applications wanting to statically link
with twolame and libmagic (for example sox), rename buffer_init into
bitbuffer_init (also rename buffer_deinit into bitbuffer_deinit and
buffer_sstell into bitbuffer_sstell for consistency)

Fixes:
 - http://autobuild.buildroot.org/results/b3fc62e7f372fe595966e84091c11ccdb4cfa77c

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/php: bump version to 7.2.12

Changelog: http://www.php.net/ChangeLog-7.php#7.2.12

Rebased patch 0004 and updated license hash after white space removal:
https://github.com/php/php-src/commit/902d39a3a79c6efe93c8879575fdd5a759cf03de

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/samba4: bump version to 4.9.2

Release notes: https://www.samba.org/samba/history/samba-4.9.2.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wireshark: disable build of user guide

--disable-guides has been added since version 2.5.0:
https://github.com/wireshark/wireshark/commit/aa04d2355effb1cf611831b0a260cf1aff199b9a

Fixes:
 - http://autobuild.buildroot.org/results/5ae6d46573942713687f4e659b3eaf0b768ebc71

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ell: new package

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Thomas: fix Config.in comment dependencies, add DEVELOPERS entry.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: add test for the f2fs filesystem support

Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

fs/f2fs: simplify overprovision option handling

Setting overprovision to 0 and omitting this option has exactly
the same effect.

Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

fs/f2fs: add option to define list of hot file extensions

Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

fs/f2fs: clarify help messages

For BR2_TARGET_ROOTFS_F2FS_COLD_FILES clarify that extension list must
be a coma separated.

For BR2_TARGET_ROOTFS_F2FS_OVERPROVISION clarify that the default
overprovision ratio is autocalculated according to the partition size.

Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>