binutils-gdb.git
13 years ago gdb/
Pedro Alves [Mon, 14 Feb 2011 11:23:33 +0000 (11:23 +0000)]
gdb/
* value.h (value_available_contents_eq): Declare.
* value.c (find_first_range_overlap): New function.
(value_available_contents_eq): New function.
* valprint.c (val_print_array_elements): Use
value_available_contents_eq.
* ada-valprint.c (val_print_packed_array_elements): Use
value_available_contents_eq.
* jv-valprint.c (java_value_print): Use
value_available_contents_eq.

13 years ago gdb/
Pedro Alves [Mon, 14 Feb 2011 11:22:29 +0000 (11:22 +0000)]
gdb/
* target.c (target_read_live_memory): New function.
(memory_xfer_live_readonly_partial): New.
(memory_xfer_partial): If reading from a traceframe, fallback to
reading unavailable read-only memory from read-only regions of
live target memory.
* tracepoint.c (disconnect_tracing): Adjust.
(set_current_traceframe): New, factored out from
set_traceframe_number.
(set_traceframe_number): Reimplement to only change the traceframe
number on the GDB side.
(do_restore_current_traceframe_cleanup): Adjust.
(make_cleanup_restore_traceframe_number): New.
(cur_traceframe_number): New global.
(tfile_open): Set cur_traceframe_number to no traceframe.
(set_tfile_traceframe): New function.
(tfile_trace_find): If looking up a traceframe using any method
other than by number, make sure the current tfile traceframe
matches gdb's current traceframe.  Update the current tfile
traceframe if the lookup succeeded.
(tfile_fetch_registers, tfile_xfer_partial)
(tfile_get_trace_state_variable_value): Make sure the remote
traceframe matches gdb's current traceframe.
* remote.c (remote_traceframe_number): New global.
(remote_open_1): Set it to -1.
(set_remote_traceframe): New function.
(remote_fetch_registers, remote_store_registers)
(remote_xfer_memory, remote_xfer_partial)
(remote_get_trace_state_variable_value): Make sure the remote
traceframe matches gdb's current traceframe.
(remote_trace_find): If looking up a traceframe using any method
other than by number, make sure the current remote traceframe
matches gdb's current traceframe.  Update the current remote
traceframe if the lookup succeeded.
* infrun.c (fetch_inferior_event): Adjust.
* tracepoint.h (set_current_traceframe): Declare.
(get_traceframe_number, set_traceframe_number): Add describing
comments.

13 years ago Mark pieces of values as unavailable if the corresponding memory
Pedro Alves [Mon, 14 Feb 2011 11:21:25 +0000 (11:21 +0000)]
Mark pieces of values as unavailable if the corresponding memory
is unavailable.

gdb/
* valops.c: Include tracepoint.h.
(value_fetch_lazy): Use read_value_memory.
(read_value_memory): New.
* value.h (read_value_memory): Declare.
* dwarf2loc.c (read_pieced_value): Use read_value_memory.
* exec.c (section_table_available_memory): New function.
* exec.h (section_table_available_memory): Declare.

13 years ago2011-02-14 Pedro Alves <pedro@codesourcery.com>
Pedro Alves [Mon, 14 Feb 2011 11:20:27 +0000 (11:20 +0000)]
2011-02-14  Pedro Alves  <pedro@codesourcery.com>

gdb/
* Makefile.in (SFILES): Add memrange.c.
(HFILES_NO_SRCDIR): Add memrange.h.
(COMMON_OBS): Add memrange.o.
* memrange.c: New file.
* memrange.h: New file.
* tracepoint.c: Include memrange.h.
(struct mem_range): Delete.
(mem_range_s): Delete.
(traceframe_available_memory): New function.
* tracepoint.h (traceframe_available_memory): Declare.

13 years ago2011-02-14 Pedro Alves <pedro@codesourcery.com>
Pedro Alves [Mon, 14 Feb 2011 11:19:26 +0000 (11:19 +0000)]
2011-02-14  Pedro Alves  <pedro@codesourcery.com>

gdb/
* target.h (struct traceframe_info): Forward declare.
(enum target_object): Add TARGET_OBJECT_TRACEFRAME_INFO.
(struct target_ops) <to_traceframe_info>: New field.
(target_traceframe_info): New.
* target.c (update_current_target): Inherit and default
to_traceframe_info.
* remote.c (PACKET_qXfer_traceframe_info): New.
(remote_protocol_features): Register qXfer:traceframe-info:read.
(remote_xfer_partial): Handle TARGET_OBJECT_TRACEFRAME_INFO.
(remote_traceframe_info): New.
(init_remote_ops): Install it.
(_initialize_remote): Install "set/show remote traceframe-info"
commands.
* tracepoint.h (parse_traceframe_info): Declare.
* tracepoint.c (struct mem_range): New.
(mem_range_s): New typedef.
(struct traceframe_info): New.
(traceframe_info): New global.
(free_traceframe_info): New function.
(clear_traceframe_info): New function.
(start_tracing, tfind_1, set_traceframe_number): Clear traceframe
info.
(build_traceframe_info): New function.
(tfile_traceframe_info): New function.
(init_tfile_ops): Install tfile_traceframe_info.
(traceframe_info_start_memory, free_result): New functions.
(memory_attributes, traceframe_info_elements): New globals.
(parse_traceframe_info, get_traceframe_info): New functions.
* features/traceframe-info.dtd: New file.
* Makefile.in (XMLFILES): Add traceframe-info.dtd.

gdb/gdbserver/
* server.c (handle_qxfer_traceframe_info): New.
(qxfer_packets): Register "traceframe-info".
(handle_query): Report support for qXfer:traceframe-info:read+.
* tracepoint.c (match_blocktype): New.
(traceframe_find_block_type): Rename to ...
(traceframe_walk_blocks): ... this.  Add callback filter argument,
and use it.
(traceframe_find_block_type): New, reimplemented on top of
traceframe_walk_blocks.
(build_traceframe_info_xml): New.
(traceframe_read_info): New.
* server.h (traceframe_read_info): Declare.

gdb/doc/
* gdb.texinfo (Remote Configuration): Mention set/show remote
traceframe-info.
(Tools/Packages Optional for Building GDB): Mention that expat is
used for traceframe info.
(Remote Protocol) <Menu>: Add "Traceframe Info Format".
(General Query Packets) <qSupported>: Describe the
qXfer:traceframe-info:read feature.
(qXfer::read): Describe qXfer:traceframe-info:read.
(Traceframe Info Format): New section.

13 years ago gdb/
Pedro Alves [Mon, 14 Feb 2011 11:13:12 +0000 (11:13 +0000)]
gdb/
* target.h (struct traceframe_info): Forward declare.
(enum target_object): Add TARGET_OBJECT_TRACEFRAME_INFO.
(struct target_ops) <to_traceframe_info>: New field.
(target_traceframe_info): New.
* target.c (update_current_target): Inherit and default
to_traceframe_info.
* remote.c (PACKET_qXfer_traceframe_info): New.
(remote_protocol_features): Register qXfer:traceframe-info:read.
(remote_xfer_partial): Handle TARGET_OBJECT_TRACEFRAME_INFO.
(remote_traceframe_info): New.
(init_remote_ops): Install it.
(_initialize_remote): Install "set/show remote traceframe-info"
commands.
* tracepoint.h (parse_traceframe_info): Declare.
* tracepoint.c (struct mem_range): New.
(mem_range_s): New typedef.
(struct traceframe_info): New.
(traceframe_info): New global.
(free_traceframe_info): New function.
(clear_traceframe_info): New function.
(start_tracing, tfind_1, set_traceframe_number): Clear traceframe
info.
(build_traceframe_info): New function.
(tfile_traceframe_info): New function.
(init_tfile_ops): Install tfile_traceframe_info.
(traceframe_info_start_memory, free_result): New functions.
(memory_attributes, traceframe_info_elements): New globals.
(parse_traceframe_info, get_traceframe_info): New functions.
* features/traceframe-info.dtd: New file.
* Makefile.in (XMLFILES): Add traceframe-info.dtd.

gdb/gdbserver/
* server.c (handle_qxfer_traceframe_info): New.
(qxfer_packets): Register "traceframe-info".
(handle_query): Report support for qXfer:traceframe-info:read+.
* tracepoint.c (match_blocktype): New.
(traceframe_find_block_type): Rename to ...
(traceframe_walk_blocks): ... this.  Add callback filter argument,
and use it.
(traceframe_find_block_type): New, reimplemented on top of
traceframe_walk_blocks.
(build_traceframe_info_xml): New.
(traceframe_read_info): New.
* server.h (traceframe_read_info): Declare.

gdb/doc/
* gdb.texinfo (Remote Configuration): Mention set/show remote
traceframe-info.
(Tools/Packages Optional for Building GDB): Mention that expat is
used for traceframe info.
(Remote Protocol) <Menu>: Add "Traceframe Info Format".
(General Query Packets) <qSupported>: Describe the
qXfer:traceframe-info:read feature.
(qXfer::read): Describe qXfer:traceframe-info:read.
(Traceframe Info Format): New section.

13 years ago Base support for <unavailable> value contents.
Pedro Alves [Mon, 14 Feb 2011 11:10:53 +0000 (11:10 +0000)]
Base support for <unavailable> value contents.

gdb/
* value.h (value_bytes_available): Declare.
(mark_value_bytes_unavailable): Declare.
* value.c (struct range): New struct.
(range_s): New typedef.
(ranges_overlap): New function.
(range_lessthan): New function.
(ranges_contain_p): New function.
(struct value) <unavailable>: New field.
(value_bytes_available): New function.
(mark_value_bytes_unavailable): New function.
(require_not_optimized_out): Constify parameter.
(require_available): New function.
(value_contents_all, value_contents): Require all bytes be
available.
(value_free): Free `unavailable'.
(value_copy): Copy `unavailable'.
* valprint.h (val_print_unavailable): Declare.
* valprint.c (valprint_check_validity): Rename `offset' parameter
to `embedded_offset'.  If printing a scalar, check whether the
value chunk is available.
(val_print_unavailable): New.
(val_print_scalar_formatted): Check whether the value is
available.
* python/py-prettyprint.c (apply_val_pretty_printer): Refuse
pretty-printing unavailable values.

13 years ago * ldmain.c (remove_output): Rename to..
Alan Modra [Mon, 14 Feb 2011 09:53:15 +0000 (09:53 +0000)]
* ldmain.c (remove_output): Rename to..
(ld_cleanup): ..this. Call bfd_cache_close_all and plugin_call_cleanup.
(main): Adjust.
* plugin.c (plugin_call_cleanup): Make global.
(plugin_load_plugins): Don't register plugin_call_cleanup with xatexit.
* plugin.h (plugin_call_cleanup): Declare.

13 years agoopcodes: blackfin: catch invalid loopsetup insns
Mike Frysinger [Mon, 14 Feb 2011 05:21:04 +0000 (05:21 +0000)]
opcodes: blackfin: catch invalid loopsetup insns

The LoopSetup insn is only valid when the reg field is 0-7, so
don't go decoding it incorrectly when reg is 8-15.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
13 years agosim: punt zfree()
Mike Frysinger [Mon, 14 Feb 2011 05:14:28 +0000 (05:14 +0000)]
sim: punt zfree()

The sim keeps track of which allocations are zero-ed internally (via
zalloc) and then calls a helper "zfree" function rather than "free".
But this "zfree" function simply calls "free" itself.  Since I can
see no point in this and it is simply useless overhead, punt it.

The only real change is in hw-alloc.c where we remove the zalloc_p
tracking, and sim-utils.c where zfree is delete.  The rest of the
changes are a simple `sed` from "zfree" to "free".

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
13 years agosim: change to 64bit time keeping to avoid 32bit overflows
Mike Frysinger [Mon, 14 Feb 2011 04:58:12 +0000 (04:58 +0000)]
sim: change to 64bit time keeping to avoid 32bit overflows

The sim-events code jumps through some hoops to avoid using 64bit math
to manage the current time.  One fundamental assumption here is that by
constantly scheduling the sim poll event a short time into the future,
the 64bit difference will always fall into a signed 32bit value.  This
does work most of the time, except for when processing the sim poll event
itself.

Normally, sim_events_process() will dequeue the sim poll event, update
the current time (time_from_event) according to the next pending event,
process the sim poll event (which will then requeue the sim poll event),
and then continue on.

The problem here of course is that the current time is updated in that
small window before the sim poll event gets a chance to reschedule itself.
So if the 64bit difference between the current time and the next event
does not fit into the signed 32bit value, time_from_event overflows, and
the internal assert at the end of update_time_from_event() triggers.

Since attempts at tweaking sim_events_process() logic introduced other
subtle bugs (due to tangled assumptions between most pieces of the sim
time keeping code), change the time_from_event to a real 64bit value.
Tests on my system between a 32bit ELF and a 64bit ELF show no practical
difference (it's all lost in the system noise).  Basically, I booted a
Linux kernel to userspace and then paniced it; this gave me a constant
sample size of about 18 million insns.

This was noticed when simulating Blackfin Das U-Boot.  The simulated core
timer is given the max unsigned timeout value possible on a 32bit processor
(0xffffffff).  This timeout value is used directly to schedule a hw event
in the sim future (the IRQ firing).  Once the sim poll event is kicked off,
the next pending event is the core timer event which is more than 2^31
ticks in the future, and the sim aborts with:
sim-events.c:435: assertion failed - current_time == sim_events_time (sd)

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
13 years ago*** empty log message ***
gdbadmin [Mon, 14 Feb 2011 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***

13 years agodaily update
Alan Modra [Sun, 13 Feb 2011 23:00:04 +0000 (23:00 +0000)]
daily update

13 years agoRemove freebsd1 from libtool.m4 macros and config.rpath.
Ralf Wildenhues [Sun, 13 Feb 2011 21:00:14 +0000 (21:00 +0000)]
Remove freebsd1 from libtool.m4 macros and config.rpath.

/:
Import from Libtool and gnulib:

2011-01-27  Gerald Pfeifer  <gerald@pfeifer.com>

Prepare for supporting FreeBSD 10.
* config.rpath: Remove handling of freebsd1* which soon would
match FreeBSD 10.0.

2011-01-20  Gerald Pfeifer  <gerald@pfeifer.com>  (tiny change)

Remove support for FreeBSD 1.x.
* libtool.m4 (_LT_LINKER_SHLIBS)
(_LT_SYS_DYNAMIC_LINKER): Remove handling of freebsd1* which
soon would incorrectly match FreeBSD 10.0.

bfd/:
* configure: Regenerate.

gas/:
* configure: Regenerate.

ld/:
* configure: Regenerate.

opcodes/:
* configure: Regenerate.

binutils/:
* configure: Regenerate.

gprof/:
* configure: Regenerate.

13 years agoopcodes: blackfin: fix decoding of ABS
Mike Frysinger [Sun, 13 Feb 2011 18:55:22 +0000 (18:55 +0000)]
opcodes: blackfin: fix decoding of ABS

The single cycle dual mac ABS insn was incorrectly decoding the mac1
part of the insn.

Once we fix the decode, update the gas tests to have the correct output.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
13 years agoopcodes: blackfin: fix decoding of dsp mult insns
Mike Frysinger [Sun, 13 Feb 2011 18:54:49 +0000 (18:54 +0000)]
opcodes: blackfin: fix decoding of dsp mult insns

When assigning to a register half, the mac0 part of the mult insn
was not decoding properly.  It would always show a full dreg instead
of the dreg low half.

Once we fix the disassembler, we have to update a few of the gas
tests as their previous expected output was incorrect.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
13 years agogas/opcodes: blackfin: punt BYTEOP2M insn support
Mike Frysinger [Sun, 13 Feb 2011 18:53:16 +0000 (18:53 +0000)]
gas/opcodes: blackfin: punt BYTEOP2M insn support

The BYTEOP2M insn was part of the initial Blackfin designs, but never made
it into any actual silicon.  So punt support for it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
13 years agogdb/
Jan Kratochvil [Sun, 13 Feb 2011 09:15:54 +0000 (09:15 +0000)]
gdb/
Fix const/volatile qualifiers of C++ types, PR c++/12328.
* c-typeprint.c (c_type_print_args): Update the function comment.  New
variable param_type, initialize it.  Remove const/volatile qualifiers
for language_cplus and !show_artificial.  Use param_type.

gdb/testsuite/
Fix const/volatile qualifiers of C++ types, PR c++/12328.
* gdb.cp/overload-const.exp: New file.
* gdb.cp/overload-const.cc: New file.

13 years agogdb/
Jan Kratochvil [Sun, 13 Feb 2011 09:09:36 +0000 (09:09 +0000)]
gdb/
* symtab.c (find_pc_sect_line): New variable objfile, initialize it
from S.  Iterate S using ALL_OBJFILE_SYMTABS.  Verify BV for each S.
* symtab.h (struct symtab) <next>: Comment extension.

13 years ago*** empty log message ***
gdbadmin [Sun, 13 Feb 2011 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***

13 years agodaily update
Alan Modra [Sat, 12 Feb 2011 23:00:05 +0000 (23:00 +0000)]
daily update

13 years agoopcodes: blackfin: add missing space after PRNT insn
Mike Frysinger [Sat, 12 Feb 2011 19:38:11 +0000 (19:38 +0000)]
opcodes: blackfin: add missing space after PRNT insn

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
13 years agoopcodes: blackfin: drop "GP" register
Mike Frysinger [Sat, 12 Feb 2011 19:37:32 +0000 (19:37 +0000)]
opcodes: blackfin: drop "GP" register

There never was a "GP" register, so punt it from the decode map.  It's
a hold over from a very old processor definition and never made it into
actual silicon.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
13 years agogas/opcodes: blackfin: move dsp mac func defines to common header
Mike Frysinger [Sat, 12 Feb 2011 19:36:31 +0000 (19:36 +0000)]
gas/opcodes: blackfin: move dsp mac func defines to common header

The mmod field is decoded in a few places (gas/opcodes/sim), so move it to
a common place to avoid duplication.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
13 years agoImport move-if-change script from gnulib.
Ralf Wildenhues [Sat, 12 Feb 2011 15:47:02 +0000 (15:47 +0000)]
Import move-if-change script from gnulib.

/:
PR binutils/12283
* MAINTAINERS (mkinstalldirs): Comes from Automake.
(move-if-change): Comes from gnulib.
* move-if-change: Import version from gnulib.

13 years agoSync toplevel and config/ from GCC.
Ralf Wildenhues [Sat, 12 Feb 2011 14:40:09 +0000 (14:40 +0000)]
Sync toplevel and config/ from GCC.

/:
Sync from GCC:

2011-02-12  Alexandre Oliva  <aoliva@redhat.com>

PR lto/47225
* Makefile.def (lto-plugin): Double dash for enable-shared.
(configure-gcc): Depend on all-lto-plugin.
* Makefile.in: Rebuilt.

2011-02-11  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

* configure.ac: Remove extra bracket.
* configure: Regenerate.

2011-02-06  Kai Tietz  <kai.tietz@onevision.com>

PR lto/47225
* Makefile.def: Add dependency for install-gcc
on install-lto-plugin.
* Makfile.in: Regenerated

2011-01-25  Jakub Jelinek  <jakub@redhat.com>

* configure.ac: If with_ppl is no, move setting with_cloog=no
after CLOOG_REQUESTED check.
* configure: Regenerated.

2011-01-25  Sebastian Pop  <sebastian.pop@amd.com>

* configure.ac: Call AC_MSG_ERROR when PPL 0.11 is not present and
CLooG has been requested.
* configure: Regenerated.

2011-01-25  Sebastian Pop  <sebastian.pop@amd.com>

* configure: Regenerated.
* configure.ac: Check for version 0.11 (or later revision) of PPL.

2011-01-25  Tobias Grosser  <grosser@fim.uni-passau.de>

* configure: Regenerated.
* configure.ac: Use CLOOG_CHECK_VERSION(0,16,1).

2011-01-07  Jan Hubicka  <jh@suse.cz>

PR lto/47225
* Makefile.in: Regenerate.
* Makefile.def (lto-plugin): Always pass enable-shared to the plugin
configure.

config/:
2011-01-25  Jakub Jelinek  <jakub@redhat.com>

* cloog.m4 (CLOOG_REQUESTED): Use $2 if --without-cloog.

2011-01-10  Jan Hubicka  <jh@suse.cz>

* bootstrap-lto.mk: -fuse-linker-plugin is default now;
pass -fno-lto to STAGEprofile.

13 years ago2011-02-12 Yao Qi <yao@codesourcery.com>
Yao Qi [Sat, 12 Feb 2011 13:07:39 +0000 (13:07 +0000)]
2011-02-12  Yao Qi  <yao@codesourcery.com>

        * Makefile.in (CLEANDIRS): Remove duplicated common dir.

13 years ago2011-02-11 Sriraman Tallam <tmsriram@google.com>
Sriraman Tallam [Sat, 12 Feb 2011 03:19:24 +0000 (03:19 +0000)]
2011-02-11  Sriraman Tallam  <tmsriram@google.com>

* output.cc (Output_section::add_input_section): Delay fill
generation for section ordering.

13 years ago2011-02-11 Yao Qi <yao@codesourcery.com>
Yao Qi [Sat, 12 Feb 2011 02:57:01 +0000 (02:57 +0000)]
2011-02-11  Yao Qi  <yao@codesourcery.com>

        * Makefile.in: Add copyright header.

13 years ago*** empty log message ***
gdbadmin [Sat, 12 Feb 2011 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***

13 years agodaily update
Alan Modra [Fri, 11 Feb 2011 23:00:15 +0000 (23:00 +0000)]
daily update

13 years agogas: blackfin: docs: typo fixes and fill out directive info
Mike Frysinger [Fri, 11 Feb 2011 19:05:30 +0000 (19:05 +0000)]
gas: blackfin: docs: typo fixes and fill out directive info

A bunch of Blackfin-specific directives were lacking info on what they
actually do, so fill in the blanks.  Further, the byte2/byte4 descriptions
were swapped.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
13 years agogas: blackfin: reject FP/SP with TESTSET
Mike Frysinger [Fri, 11 Feb 2011 19:04:33 +0000 (19:04 +0000)]
gas: blackfin: reject FP/SP with TESTSET

The TESTSET insn does not work with the FP/SP Pregs, so reject them.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
13 years agoopcodes: blackfin: constify register names
Mike Frysinger [Fri, 11 Feb 2011 19:03:27 +0000 (19:03 +0000)]
opcodes: blackfin: constify register names

Constify the array itself since it need not be writable.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
13 years agoopcodes: blackfin: add multiple inclusion protection
Mike Frysinger [Fri, 11 Feb 2011 17:47:54 +0000 (17:47 +0000)]
opcodes: blackfin: add multiple inclusion protection

Prevent build errors if the header happens to be included multiple times.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
13 years ago * infrun.c (proceed): Move switching out and in of tfind mode from
Pedro Alves [Fri, 11 Feb 2011 15:07:50 +0000 (15:07 +0000)]
* infrun.c (proceed): Move switching out and in of tfind mode from
here ...
(fetch_inferior_event): ... to here.

13 years ago2011-02-11 Yao Qi <yao@codesourcery.com>
Yao Qi [Fri, 11 Feb 2011 09:57:25 +0000 (09:57 +0000)]
2011-02-11  Yao Qi  <yao@codesourcery.com>

* Makefile.in: Remove signals.o from COMMON_OBS.  Link
libcommon.a.
* configure.ac: Add common to sub dir.
* configure: Regenerate.

common/
2011-02-11  Yao Qi  <yao@codesourcery.com>

Build libcommon.a.

* Makefile.in: New.
* configure.ac: New.
* aclocal.m4: New.
* configure: Generate.

gdbserver/
2011-02-11  Yao Qi  <yao@codesourcery.com>

* configure.ac: Call AC_PROG_RANLIB.
* Makefile.in: Remove signals.o from OBS.  Link libcommon.a.
* configure: Regenerate.

13 years ago*** empty log message ***
gdbadmin [Fri, 11 Feb 2011 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***

13 years agodaily update
Alan Modra [Thu, 10 Feb 2011 23:00:04 +0000 (23:00 +0000)]
daily update

13 years ago * doc/c-ppc.texi (PowerPC-Opts <-nops>): Clarify.
Alan Modra [Thu, 10 Feb 2011 22:50:09 +0000 (22:50 +0000)]
* doc/c-ppc.texi (PowerPC-Opts <-nops>): Clarify.

13 years agoFix whitespace.
Pedro Alves [Thu, 10 Feb 2011 18:40:22 +0000 (18:40 +0000)]
Fix whitespace.

13 years ago * vec.h (VEC_block_remove): Place VEC_ASSERT_INFO on the right
Pedro Alves [Thu, 10 Feb 2011 18:31:28 +0000 (18:31 +0000)]
* vec.h (VEC_block_remove): Place VEC_ASSERT_INFO on the right
side of the parenthesis.

Merge from GCC:
2010-07-13  Jakub Jelinek  <jakub@redhat.com>
        * vec.h (VEC_block_remove): Fix comment.

13 years ago2011-02-10 Kai Tietz <kai.tietz@onevision.com>
Kai Tietz [Thu, 10 Feb 2011 17:06:44 +0000 (17:06 +0000)]
2011-02-10  Kai Tietz  <kai.tietz@onevision.com>

        * gas/cfi/cfi-x86_64.d: Adjust for x64 PE+.

13 years ago * doc/as.texinfo (Overview): Add missing markup around Blackfin
Alan Modra [Thu, 10 Feb 2011 12:29:23 +0000 (12:29 +0000)]
* doc/as.texinfo (Overview): Add missing markup around Blackfin
and PowerPC options.

13 years ago * config/tc-ppc.c (md_show_usage): Remove -l and -b. Add -K PIC.
Alan Modra [Thu, 10 Feb 2011 11:59:12 +0000 (11:59 +0000)]
* config/tc-ppc.c (md_show_usage): Remove -l and -b.  Add -K PIC.
* doc/as.texinfo: Refer to and include c-ppc.texi for PowerPC options.
(Overview <Target PowerPC options>): Add a number of missing options.
* doc/c-ppc.texi: Likewise.  Add markup for use in manpage generation.

13 years ago * gas/m68k/cpu32.d: Set explicit architecture for objdump.
Alan Modra [Thu, 10 Feb 2011 08:43:27 +0000 (08:43 +0000)]
* gas/m68k/cpu32.d: Set explicit architecture for objdump.
* gas/m68k/mcf-coproc.d: Likewise.
* gas/m68k/mcf-wdebug.d: Likewise.

13 years agoremove accidental SANE_EXPR change
Alan Modra [Thu, 10 Feb 2011 08:35:26 +0000 (08:35 +0000)]
remove accidental SANE_EXPR change

13 years ago * scripttempl/armbpabi.sc: Revert 2010-11-02 H.J. Lu.
Alan Modra [Thu, 10 Feb 2011 08:18:58 +0000 (08:18 +0000)]
* scripttempl/armbpabi.sc: Revert 2010-11-02  H.J. Lu.
* scripttempl/avr.sc: Likewise.
* scripttempl/elf32cr16.sc: Likewise.
* scripttempl/elf32crx.sc: Likewise.
* scripttempl/elf32msp430.sc: Likewise.
* scripttempl/elf32msp430_3.sc: Likewise.
* scripttempl/elf32sh-symbian.sc: Likewise.
* scripttempl/elf64hppa.sc: Likewise.
* scripttempl/elf_chaos.sc: Likewise.
* scripttempl/elfd10v.sc: Likewise.
* scripttempl/elfd30v.sc: Likewise.
* scripttempl/elfi370.sc: Likewise.
* scripttempl/elfm68hc11.sc: Likewise.
* scripttempl/elfm68hc12.sc: Likewise.
* scripttempl/elfxtensa.sc: Likewise.
* scripttempl/ip2k.sc: Likewise.
* scripttempl/iq2000.sc: Likewise.
* scripttempl/mep.sc: Likewise.
* scripttempl/mmo.sc: Likewise.
* scripttempl/v850.sc: Likewise.
* scripttempl/xstormy16.sc: Likewise.
* scripttempl/elf.sc: Revert 2010-10-29  H.J. Lu.

13 years ago * ld-scripts/defined.exp: Don't run defined5 for AOUT.
Alan Modra [Thu, 10 Feb 2011 08:04:22 +0000 (08:04 +0000)]
* ld-scripts/defined.exp: Don't run defined5 for AOUT.
* ld-scripts/defined5.s: Use .text for "defined" section.
* ld-scripts/defined5.t: Adjust.

13 years ago * ld-gc/start.d: Exclude frv-*-linux*.
Alan Modra [Thu, 10 Feb 2011 07:24:06 +0000 (07:24 +0000)]
* ld-gc/start.d: Exclude frv-*-linux*.
* ld-misc/defsym1.d: Likewise.

13 years ago * gas/elf/dwarf2-4.s: Don't use @.
Alan Modra [Thu, 10 Feb 2011 05:06:19 +0000 (05:06 +0000)]
* gas/elf/dwarf2-4.s: Don't use @.

13 years ago PR gold/12316
Ian Lance Taylor [Thu, 10 Feb 2011 01:12:37 +0000 (01:12 +0000)]
PR gold/12316
* object.h (class Sized_relobj): Remove clear_local_symbols.
* reloc.cc (Sized_relobj::do_relocate): Don't call
clear_local_symbols.

13 years ago*** empty log message ***
gdbadmin [Thu, 10 Feb 2011 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***

13 years agodaily update
Alan Modra [Wed, 9 Feb 2011 23:00:04 +0000 (23:00 +0000)]
daily update

13 years ago2011-02-09 Michael Snyder <msnyder@vmware.com>
Michael Snyder [Wed, 9 Feb 2011 18:43:41 +0000 (18:43 +0000)]
2011-02-09  Michael Snyder  <msnyder@vmware.com>

* i386-dis.c (OP_J): Parenthesize expression to prevent
truncated addresses.
(print_insn): Fix indentation off-by-one.

13 years ago * ld-elfvsb/elfvsb.exp: Don't run any non-PIC tests on powerpc*-linux.
Alan Modra [Wed, 9 Feb 2011 08:18:54 +0000 (08:18 +0000)]
* ld-elfvsb/elfvsb.exp: Don't run any non-PIC tests on powerpc*-linux.
* ld-gc/gc.exp: Ensure powerpc64 test continues to fail.
* ld-srec/srec.exp: Don't edit toc on powerpc64.

13 years ago * elf64-ppc.c (ppc64_elf_edit_toc): Don't free toc relocs until
Alan Modra [Wed, 9 Feb 2011 08:16:00 +0000 (08:16 +0000)]
* elf64-ppc.c (ppc64_elf_edit_toc): Don't free toc relocs until
we are done.  When optimising large toc, check that a global
symbol on a toc reloc is defined in a kept section.

13 years ago*** empty log message ***
gdbadmin [Wed, 9 Feb 2011 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***

13 years agodaily update
Alan Modra [Tue, 8 Feb 2011 23:00:06 +0000 (23:00 +0000)]
daily update

13 years ago2011-02-08 Michael Snyder <msnyder@vmware.com>
Michael Snyder [Tue, 8 Feb 2011 22:35:57 +0000 (22:35 +0000)]
2011-02-08  Michael Snyder  <msnyder@vmware.com>

* linux-nat.c (linux_nat_filter_event): Fix typo in comment.

13 years agoUse f32_patt in i386_align_code when tuning for i686.
H.J. Lu [Tue, 8 Feb 2011 20:21:26 +0000 (20:21 +0000)]
Use f32_patt in i386_align_code  when tuning for i686.

gas/

2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>

PR gas/6957
* config/tc-i386.c (i386_align_code): Use f32_patt when tuning
for i686.

gas/testsuite/

2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>

PR gas/6957
* gas/i386/nops-1-i686.d: Updated.
* gas/i386/nops-3-i686.d: Likewise.
* gas/i386/nops-4-i686.d: Likewise.

13 years agoAlso update cpu_arch_isa_flags for ISA extensions.
H.J. Lu [Tue, 8 Feb 2011 18:12:25 +0000 (18:12 +0000)]
Also update cpu_arch_isa_flags for ISA extensions.

gas/

2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (set_cpu_arch): Also update cpu_arch_isa_flags
for ISA extensions.
(md_parse_option): Likewise.

gas/testsuite/

2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/i386.exp: Run nops-4a-i686 and nops-6.

* gas/i386/nops-4a-i686.d: New.
* gas/i386/nops-6.d: Likewise.
* gas/i386/nops-6.s: Likewise.

13 years agogdb/
Jan Kratochvil [Tue, 8 Feb 2011 14:01:47 +0000 (14:01 +0000)]
gdb/
* i386-tdep.c (i386_process_record): Rename l suffixes to d suffixes
in comments for pcmpgtd, pcmpeqd, psubd, paddd, pcmpgtd, pcmpeqd,
psubd and paddd.

13 years agogdb/
Jan Kratochvil [Tue, 8 Feb 2011 13:58:02 +0000 (13:58 +0000)]
gdb/
PR 12361.
* i386-tdep.c (i386_process_record) <0x660f3807>: Fix the comment to
phsubsw.
(i386_process_record) <lddqu>: Fix the opcode to 0xf20ff0.
(i386_process_record) <0x0f3807>: Fix the comment to phsubsw.

13 years agoinclude/ChangeLog:
Ulrich Weigand [Tue, 8 Feb 2011 13:30:10 +0000 (13:30 +0000)]
include/ChangeLog:

* dwarf2.h (enum dwarf_calling_convention): Add DW_CC_GDB_IBM_OpenCL.

gdb/ChangeLog:

* dwarf2read.c (read_subroutine_type): Set special calling
convention flag for functions compiled by IBM XL C for OpenCL.
* ppc-sysv-tdep.c: Include "dwarf2.h"
(ppc_sysv_abi_push_dummy_call): Implement IBM OpenCL vector types
calling convention.
(do_ppc_sysv_return_value): Add FUNC_TYPE argument.  Implement
IBM OpenCL vector types calling convention.
(ppc_sysv_abi_return_value): Pass through FUNC_TYPE.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_push_dummy_call): Implement IBM OpenCL vector
types calling convention.
(ppc64_sysv_abi_return_value): Likewise.
* spu-tdep.c: Include "dwarf2.h"
(spu_return_value): Implement IBM OpenCL vector types calling
convention.

gdb/testsuite/ChangeLog:

* gdb.opencl/callfuncs.cl: New file.
* gdb.opencl/callfuncs.exp: New test.
* gdb.opencl/Makefile.in (EXECUTABLES): Add callfuncs.

13 years agoChangeLog:
Ulrich Weigand [Tue, 8 Feb 2011 13:25:01 +0000 (13:25 +0000)]
ChangeLog:

* ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Implement
correct ABI for AltiVec vector arguments.

testsuite/ChangeLog:

* gdb.arch/altivec-abi.c (vec_func): Make use of intv_on_stack_f
when computing result.
* gdb.arch/altivec-abi.exp: Update expected results.

13 years ago PR binutils/12467
Nick Clifton [Tue, 8 Feb 2011 09:40:05 +0000 (09:40 +0000)]
PR binutils/12467
* readelf.c (process_program_headers): Issue a warning if there
are no program headers but the file header has a non-zero program
header offset.
(process_section_headers): Issue a warning if there are no section
headers but the file header has a non-zero section header offset.
(process_section_groups): Reword the no section message so that it
can be distinguished from the one issued by process_section_headers.

* elf.c (assign_file_positions_for_load_sections): Set the program
header offset and entry size to zero if there are no program
headers.

13 years ago2010-02-08 Rafael Ávila de Espíndola <respindola@mozilla.com>
Rafael Ávila de Espíndola [Tue, 8 Feb 2011 05:03:19 +0000 (05:03 +0000)]
2010-02-08  Rafael Ávila de Espíndola <respindola@mozilla.com>

* plugin.cc (is_visible_from_outside): Return true for symbols
in the -u option.

13 years ago * elf64-ppc.c (ppc64_elf_edit_toc): Don't segfault on NULL
Alan Modra [Tue, 8 Feb 2011 02:54:42 +0000 (02:54 +0000)]
* elf64-ppc.c (ppc64_elf_edit_toc): Don't segfault on NULL
local_syms when looking for local symbols in .toc.

13 years ago*** empty log message ***
gdbadmin [Tue, 8 Feb 2011 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***

13 years agodaily update
Alan Modra [Mon, 7 Feb 2011 23:00:05 +0000 (23:00 +0000)]
daily update

13 years ago * valprint.c (val_print): Extend comment.
Pedro Alves [Mon, 7 Feb 2011 17:49:32 +0000 (17:49 +0000)]
* valprint.c (val_print): Extend comment.
* ada-valprint.c (ada_valprint): Rewrite comment deferring
interface explanation to val_print.
(ada_val_print_array): Adjust comment to current interface.
(print_field_values): Adjust comment to current interface.
* c-valprint.c (c_val_print): Rewrite comment deferring interface
explanation to val_print.
* f-valprint.c (f_val_print): Ditto.
* jv-valprint.c (java_val_print): Ditto.
* m2-valprint.c (m2_val_print): Ditto.
* p-valprint.c (pascal_val_print): Ditto.

13 years ago * gdb.base/break-interp.exp: Remove ${objdir} from test messages.
Thiago Jung Bauermann [Mon, 7 Feb 2011 13:35:42 +0000 (13:35 +0000)]
* gdb.base/break-interp.exp: Remove ${objdir} from test messages.
* gdb.base/jit.exp: Likewise.
* gdb.base/pie-execl.exp: Likewise.
* gdb.base/solib-nodir.exp: Likewise.
* gdb.base/solib-overlap.exp: Likewise.

13 years ago * breakpoint.c (parse_breakpoint_sals): Fix description.
Thiago Jung Bauermann [Mon, 7 Feb 2011 13:30:33 +0000 (13:30 +0000)]
* breakpoint.c (parse_breakpoint_sals): Fix description.

13 years ago gdb/server/
Pedro Alves [Mon, 7 Feb 2011 12:14:14 +0000 (12:14 +0000)]
gdb/server/
* server.c (gdb_read_memory): Change return semantics to allow
partial transfers.
(handle_search_memory_1): Adjust.
(process_serial_event) <'m' packet>: Handle partial transfers.
* tracepoint.c (traceframe_read_mem): Handle partial transfers.

gdb/testsuite/
* gdb.trace/collection.c (global_pieces): New.
* gdb.trace/collection.exp (gdb_collect_global_in_pieces_test):
New procedure.
(gdb_trace_collection_test): Call it.

13 years ago PR gas/3041
Alan Modra [Mon, 7 Feb 2011 00:04:09 +0000 (00:04 +0000)]
PR gas/3041
* gas/m68k/p3041pcrel.s, * gas/m68k/p3041pcrel.d: New test.
* gas/m68k/all.exp: Add "p3041pcrel" and enable p3041 tests for
all m68k-aout targets.

13 years ago*** empty log message ***
gdbadmin [Mon, 7 Feb 2011 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***

13 years ago PR gprof/12468
Alan Modra [Sun, 6 Feb 2011 23:38:38 +0000 (23:38 +0000)]
PR gprof/12468
* corefile.c (core_create_function_syms): Set is_func for targets
that have no BSF_FUNCTION syms.

13 years agodaily update
Alan Modra [Sun, 6 Feb 2011 23:00:04 +0000 (23:00 +0000)]
daily update

13 years ago*** empty log message ***
gdbadmin [Sun, 6 Feb 2011 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***

13 years agodaily update
Alan Modra [Sat, 5 Feb 2011 23:00:29 +0000 (23:00 +0000)]
daily update

13 years agoAdd the file that prev commit forget.
Hui Zhu [Sat, 5 Feb 2011 05:27:23 +0000 (05:27 +0000)]
Add the file that prev commit forget.

13 years ago * symtab.cc (Odr_violation_compare::operator()): Sort by just the
Ian Lance Taylor [Sat, 5 Feb 2011 01:52:40 +0000 (01:52 +0000)]
* symtab.cc (Odr_violation_compare::operator()): Sort by just the
filename.

13 years ago*** empty log message ***
gdbadmin [Sat, 5 Feb 2011 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***

13 years agodaily update
Alan Modra [Fri, 4 Feb 2011 23:00:05 +0000 (23:00 +0000)]
daily update

13 years agoAdd Python support for GDB events.
Sami Wagiaalla [Fri, 4 Feb 2011 21:54:16 +0000 (21:54 +0000)]
Add Python support for GDB events.

2011-02-04  Sami Wagiaalla  <swagiaal@redhat.com>

* gdb.python/py-evthreads.c: New file.
* gdb.python/py-evthreads.exp: New file.
* gdb.python/py-events.py: New file.
* gdb.python/py-events.exp: New file.
* gdb.python/py-events.c: New file.

2011-02-04  Sami Wagiaalla  <swagiaal@redhat.com>
                Oguz Kayral <oguzkayral@gmail.com>

* python/py-inferior.c (python_on_normal_stop): New function.
(python_on_resume): New function.
(python_inferior_exit): New function.
(gdbpy_initialize_inferior): Add normal_stop, target_resumed, and
inferior_exit observers.
* python/py-evtregistry.c: New file.
* python/py-threadevent.c : New file.
* python/py-event.c: New file.
* python/py-evts.c: New file.
* python/py-continueevent.c: New file.
* python/py-bpevent.c: New file.
* python/py-signalevent.c: New file.
* python/py-exetiedevent.c: New file.
* python/py-breakpoint.c (gdbpy_breakpoint_from_bpstats): New function.
Move struct breakpoint_object from here...
* python/python-internal.h: ... to here.
* python/py-event.h: New file.
* python/py-events.h: New file.
* Makefile.in (SUBDIR_PYTHON_OBS): Add py-breakpointstopevent.o,
py-continueevent.o, py-event.o, py-eventregistry.o, py-events.o,
py-exitedevent.o, py-signalstopevent.o, and py-stopevent.o.
(SUBDIR_PYTHON_SRCS): Add py-breakpointstopevent.c,
py-continueevent.c, py-event.c, py-eventregistry.c, py-events.c,
py-exitedevent.c, py-signalstopevent.c, and py-stopevent.c.
Add build rules for all the above.

13 years ago * dwarf2read.c (dwarf2_section_empty_p): New function.
Tom Tromey [Fri, 4 Feb 2011 20:33:09 +0000 (20:33 +0000)]
* dwarf2read.c (dwarf2_section_empty_p): New function.
(dwarf2_read_section): Use dwarf2_section_empty_p.
(dwarf2_section_size): New function.
(dwarf2_get_section_info): Unconditionally read section.
(dwarf2_read_index): Use dwarf2_section_empty_p.
(partial_read_comp_unit_head): Use dwarf2_section_size.
(dwarf2_symbol_mark_computed): Likewise.

13 years ago * gdbint.texinfo (Formatting): Mention some formatting guidelines
Pedro Alves [Fri, 4 Feb 2011 19:10:12 +0000 (19:10 +0000)]
* gdbint.texinfo (Formatting): Mention some formatting guidelines
for casts and unary operators.

13 years ago2011-02-04 David Daney <ddaney@caviumnetworks.com>
David Daney [Fri, 4 Feb 2011 18:45:15 +0000 (18:45 +0000)]
2011-02-04 David Daney <ddaney@caviumnetworks.com>

* NEWS: Add item for "catch syscall" on mips*-linux* targets.

13 years ago * gdb.texinfo (GDB/MI Async Records): Document that symbols-loaded
Tom Tromey [Fri, 4 Feb 2011 18:35:04 +0000 (18:35 +0000)]
* gdb.texinfo (GDB/MI Async Records): Document that symbols-loaded
is not useful.

13 years agogdb/
David Daney [Fri, 4 Feb 2011 18:34:43 +0000 (18:34 +0000)]
gdb/
2011-02-04 David Daney <ddaney@caviumnetworks.com>

* mips-linux-tdep.c: Include xml-syscall.h.
(mips_linux_get_syscall_number): New function.
(mips_linux_init_abi): Add calls to
mips_linux_get_syscall_number() and set_xml_syscall_file_name().
* data-directory/Makefile.in (SYSCALLS_FILES): Add
mips-o32-linux.xml, mips-n32-linux.xml and mips-n64-linux.xml
* syscalls/mips-n32-linux.xml: New file.
* syscalls/mips-n64-linux.xml: New file.
* syscalls/mips-o32-linux.xml: New file.
gdb/testsuite/
2011-02-04 David Daney <ddaney@caviumnetworks.com>

* gdb.base/catch-syscall.exp: Enable for mips*-linux*.

13 years ago * dwarf2read.c (dwarf2_ranges_read): Skip empty range entries.
Ulrich Weigand [Fri, 4 Feb 2011 18:13:25 +0000 (18:13 +0000)]
* dwarf2read.c (dwarf2_ranges_read): Skip empty range entries.
Complain about inverted range entries.
(dwarf2_record_block_ranges): Likewise.

13 years ago Fix some typos.
Thiago Jung Bauermann [Fri, 4 Feb 2011 17:27:19 +0000 (17:27 +0000)]
Fix some typos.
* breakpoint.c (update_watchpoint): Fix name of the
update_global_location_list function.
(print_one_breakpoint): Fix typo.
(_initialize_breakpoint): Remove extra space in hbreak help
string.
* breakpoint.h (struct bp_location) <length>: Fix field
description.

13 years ago * regcache.c (registers_changed_ptid): Don't explictly always
Pedro Alves [Fri, 4 Feb 2011 15:46:49 +0000 (15:46 +0000)]
* regcache.c (registers_changed_ptid): Don't explictly always
clear `current_regcache'.  Only clear current_thread_ptid and
current_thread_arch when PTID matches.  Only reinit the frame
cache if PTID matches the current inferior_ptid.  Move alloca(0)
call to ...
(registers_changed): ... here.

13 years ago*** empty log message ***
gdbadmin [Fri, 4 Feb 2011 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***

13 years ago gas/
Bernd Schmidt [Thu, 3 Feb 2011 23:20:26 +0000 (23:20 +0000)]
gas/
* doc/as.texinfo (Target TIC6X options): Don't mention "-matomic".
* doc/c-tic6x.texi (TIC6X Directives): Don't mention ".atomic".
(TIC6X Options): Don't mention "-matomic".
* config/tc-tic6x.c (OPTION_MATOMIC, OPTION_MNO_ATOMIC): Delete.
(md_longopts): Remove corresponding entries.
(md_parse_option): Don't handle them.
(md_show_usage): Don't document them.
(tic6x_atomic): Delete variable.
(tic6x_update_features): Always copy tic6x_arch_enable to
tic6x_features.
(tic6x_arch_enable): Remove references to TIC6X_INSN_ATOMIC.
(s_tic6x_atomic, s_tic6x_noatomic): Remove functions.
(md_pseudo_table): Remove ".atomic" and ".noatomic".

gas/testsuite/
* gas/tic6x/dir-junk.l: Remove tests for .atomic and .noatomic.
* gas/tic6x/dir-junk.s: Likewise.
* gas/tic6x/insns-c674x-bad.d: Remove test.
* gas/tic6x/insns-c674x-bad.l: Likewise.
* gas/tic6x/insns-atomic.d: Remove "-matomic" switch.

include/opcode/
* tic6x-opcode-table.h (cmtl, ll, sl): Available on C64XP.
* tic6x.h (TIC6X_INSN_ATOMIC): Remove.

13 years agodaily update
Alan Modra [Thu, 3 Feb 2011 23:00:04 +0000 (23:00 +0000)]
daily update

13 years ago * arm-tdep.c (arm_skip_stack_protector): Accept any symbol that
Ulrich Weigand [Thu, 3 Feb 2011 18:34:55 +0000 (18:34 +0000)]
* arm-tdep.c (arm_skip_stack_protector): Accept any symbol that
starts with __stack_chk_guard as stack guard symbol.

13 years agohttp://sourceware.org/ml/gdb-patches/2010-12/msg00300.html
Andrew Burgess [Thu, 3 Feb 2011 14:45:37 +0000 (14:45 +0000)]
sourceware.org/ml/gdb-patches/2010-12/msg00300.html
Improve the ordering of line table entries when dealing with the end
of sequence markers.  This will allow us to disassemble over the border
between two compile units while also displaying source code information.

13 years agolibiberty: documentation markup and order fixes.
Ralf Wildenhues [Thu, 3 Feb 2011 07:23:59 +0000 (07:23 +0000)]
libiberty: documentation markup and order fixes.

libiberty/:
* splay-tree.c: Escape wrapping newlines in texinfo markup
with '@', to fix function declaration output rendering.
* gather-docs: Relax and improve macro name matching to actually
match all current names and to allow input line wrapping.
* bsearch.c, concat.c, crc32.c, fnmatch.txh, fopen_unlocked.c,
hashtab.c, insque.c, make-relative-prefix.c, memchr.c, memcmp.c,
memcpy.c, memmem.c, memmove.c, mempcpy.c, memset.c,
pexecute.txh, random.c, setenv.c, setproctitle.c,
simple-object.txh, snprintf.c, stpncpy.c, strncmp.c, strtod.c,
strtol.c, vasprintf.c, vprintf.c, vsnprintf.c, xmemdup.c:
Wrap long texinfo input lines.
* functions.texi: Regenerate.