package/ipcalc: new package

ipcalc is an ancient and venerable tool for manipulating IP addresses,
networks, & interfaces from shell scripts.  There is a subtool in busybox,
but it does not support everything the upstream tool [1] supports.

[1] https://gitlab.com/ipcalc/ipcalc

Signed-off-by: Derrick Lyndon Pallas <derrick@meter.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gst1-libav: bump version to 1.18.0 and convert to meson

- change home page url to https

- convert to meson build

- drop all libav extra options as the internal libav is
  gone since commit [1]

- meson options: add doc=disabled

[1] https://gitlab.freedesktop.org/gstreamer/gst-libav/-/commit/ca478e7546c059574e0f134125deb38c8cbc9111

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bellagio: drop package

Drop bellagio support as the project is no longer maintained (no update
since 2011, see [1]) and the last reference (from gst-omx) is gone.

[1] http://omxil.sourceforge.net

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gst-omx: bump version to 1.18.0 and convert to meson

- change home page url to https

- drop bellagio support (as the project is no longer maintained
  no update since 2011, see [1])

[1] http://omxil.sourceforge.net

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gstreamer1-editing-services: bump version to 1.18.0 and convert to meson

- change home page url to https

- change download url to https

- download source renamed from gstreamer-editing-services to
  gst-editing-services

- convert to meson build

- use BR2_PACKAGE_GST1_DEVTOOLS/gst1-devtools instead of legacy
  BR2_PACKAGE_GST1_VALIDATE/gst1-validate

- drop examples support

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/hardkernel/odruidc2: remove rootfs size limit

As resizing the rootfs partition using a partition manager can result
in a non booting image due to the firmware's location, removal of the
size limit for the rootfs allows better match size-wise.

Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dvb-apps: fix build failure with glibc 2.31

dvb-apps fails to build with glibc 2.31 with the following error:
| dvbdate.c: In function set_time:
| dvbdate.c:312:6: warning: implicit declaration of function stime; did you mean ctime? [-Wimplicit-function-declaration]
| 312 | if (stime(new_time)) {
| | ^~~~~
| | ctime

Fixes:

http://autobuild.buildroot.net/results/95f30c5e6af2274418bb44a20da7caac69f1dd68/

references:
1. https://gitweb.gentoo.org/repo/gentoo.git/commit/media-tv/linuxtv-dvb-apps/files/linuxtv-dvb-apps-glibc-2.31.patch?id=eb705f892eae45b93306c1de1407c1c22ac23956
2. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=964223

Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/kismet: add python tools support

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/kismet: bump to version 2020-09-R3

- Drop all patches (not needed anymore)
- Update help message of Config.in: kismet does not support only WiFi
  but also Bluetooth, SDR ...
- Remove ncurses dependency
- libnl is now optional
- Drop --with-netlink-version (not available anymore)
- Add protobuf, protobuf-c, sqlite and zlib mandatory dependencies
- kismet_client and kismet_drone have been dropped since version 2019-04-R1
- Select libmicrohttpd for kismet_server
- Add optional libusb and lm-sensors dependencies
- Use --{enable,disable}-{libcap,pcre} options
- Use the new LICENSE file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libblockdev: fs needs libmount

Fixes:
 - http://autobuild.buildroot.org/results/1f83436a84046da753a2ebf2aac7c0f0cc188fe0

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: remove several packages from Adam Duskett

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/{mesa3d, mesa3d-headers}: bump version to 20.1.10

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/oniguruma: fix CVE-2020-26159

Fix CVE-2020-26159: In Oniguruma 6.9.5_rev1, an attacker able to supply
a regular expression for compilation may be able to overflow a buffer by
one byte in concat_opt_exact_str in src/regcomp.c.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/duktape: bump to version 2.6.0

- Use official tarball instead of github helper
- Update indentation in hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libapparmor: fix build on uclibc

Fix build of version 3.0.0 with uclibc. While the patch is added in
package/libapparmor, it in fact fixes a build issue that only occurs
when building package/apparmor, but as both packages share the same
source, they also share the same patches.

Fixes:
 - http://autobuild.buildroot.org/results/aea20bd5539fad35385565ffeb7e6ac566507017

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libapparmor: fix build on musl

Fix build of version 3.0.0 with musl. Since the apparmor and
libapparmor packages share the same sources, we also share their
patches: this is why the patch is added in package/libapparmor/3.0.0,
and a symlink package/apparmor/3.0.0 -> package/libapparmor/3.0.0 is
added.

Fixes:
 - http://autobuild.buildroot.org/results/22fb440240aa698acc68f026be790d5366c8f908

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/botan: fix build with aarch64_be

aarch64_be support was added by commit 3e3b524883cebf190099c72d41c817baa8192589

Fixes:
 - http://autobuild.buildroot.org/results/69ebf03c59b2af4140a39bc26f17d0396b6ec15d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/udoo: use common freescale infrastructure

U-Boot 2020.10 no longer provides boot command in default environment for
Udoo Quad/Dual board. Boot script needs to be added to the image. In order
to keep using common infrastructure for freescale boards, move boot files
to root filesystem and add boot script there. Also switch Udoo Neo board
to common freescale infrastructure to simplify maintenance.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/udoo/mx6qdl: disable usb host in device tree

After BSP update Udoo Quad/Dual board once again hangs on boot. On a
new kernel disabling CONFIG_USB option is not enough to work around
the troublesome usb host on Udoo Quad/Dual board. So in order to be
future-proof it makes sense to disable usbh1 block in device tree
rather than fine-tune kernel configuration after BSP updates.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/mx6udoo_defconfig: bump kernel and U-Boot versions

Bump Linux kernel to 5.8.13 and U-Boot to 2020.10.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/freescale_imx8mmevk: bump to NXP BSP 5.4.24_2.1.0 components

Bump ATF, U-Boot and kernel to the NXP BSP 5.4.24_2.1.0 versions.

On 5.4.24_2.1.0 the revC board is supported by default.

In case an older revB board is used, then the following step in U-Boot is
needed:

=> setenv fdt_file imx8mm-evk-revb.dtb
=> saveenv
=> reset

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/freescale_imx8mqevk: bump to NXP BSP 5.4.24_2.1.0 components

Bump ATF, U-Boot and kernel to the NXP BSP 5.4.24_2.1.0 versions.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/freescale_imx8*: use NXP specific defconfig

When using the imx8 NXP kernel, it is preferred to use the imx_v8_defconfig
instead of the generic arm64 defconfig, as the NXP defconfig selects more
imx8 specific drivers.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/tpm2-tss: bump version to 3.0.1

- 0001-Temporary-fix-for-build-without-C.patch, AC_PROG_CXX line
  number changed.
- Makefile-fuzz-generated.am now in size zero.
- json-c, libcurl: new (FAPI) dependencies since tpm2-tss version 2.4.0

Signed-off-by: Yair Ben-Avraham <yairba@protonmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sslh: fix static build with pcre

Fix static build failure with sslh version 1.19b and above

Fixes:
 - http://autobuild.buildroot.org/results/a601824fc0c205a6a940e0f9f079ce2c39840605

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/kontron_smarc_sal28: pin kernel version to 5.9

Use a fixed kernel version to have a reproducible and tested
configuration.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-multidict: bump to version 5.0.0

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-frozenlist: bump to version 1.1.0

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/harfbuzz: add introspection support

Add introspection support to harfbuzz otherwise activation of
introspection in pango 1.46.1 will fail on:

Couldn't find include 'HarfBuzz-0.0.gir' (search path: '['/home/naourr/work/instance-2/output-1/host/aarch64-buildroot-linux-gnu/sysroot/usr/bin/../share/gir-1.0', '/home/naourr/work/instance-2/output-1/host/share/gir-1.0', '/home/naourr/work/instance-2/output-1/host/share', '/home/naourr/.local/share/flatpak/exports/share/gir-1.0', '/var/lib/flatpak/exports/share/gir-1.0', '/usr/local/share/gir-1.0', '/usr/share/gir-1.0', '/home/naourr/work/instance-2/output-1/host/share/gir-1.0', '/usr/share/gir-1.0']')

Fixes:
 - http://autobuild.buildroot.org/results/3357225ee2d8392bfd57af91cde04a1113e03493

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libva: bump version to 2.9.0

Changelog: https://github.com/intel/libva/blob/master/NEWS

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/proj: bump to 7.1.1

Signed-off-by: Zoltan Gyarmati <zgyarmati@zgyarmati.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing/tests/toolchain/test_external_bootlin: regenerate with new PowerPC toolchains

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain/toolchain-external/toolchain-external-bootlin: regenerate with new PowerPC toolchains

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/scripts/gen-bootlin-toolchains: add support for more PowerPC toolchains

The 2020.08-1 release of Bootlin toolchains has brought support for 3
additional architecture variants, so let's support them.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain/toolchain-external/toolchain-external-bootlin: update to 2020.08-1 toolchains

Bootlin toolchains in version 2020.08-1 have just been released, so
let's update the toolchain-external-bootlin package to those new
toolchains.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain/toolchain-external/toolchain-external-bootlin: update auto-generated files

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/scripts/gen-bootlin-toolchains: add missing MMU dependencies

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/scripts/gen-bootlin-toolchains: add missing glibc toolchain dependencies

glibc toolchains must be disabled for static only configuration.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/patchelf: pull in upstream bugfixes

When building iputils for powerpc with BR2_PIC_PIE enabled, the
arping/rdisc/tftpd binaries will segfault at runtime. This can be
traced back to a few bugs in patchelf corrupting the ELFs when
resizing the RPATH to replace "$ORIGIN/" with "/usr/sbin".

This patch pulls in upstream fixes to prevent the binaries from being
needlessly inflated, prevent the startPage from always being adjusted,
fix a few minor bugs, and fix incorrect endianness handling.

Signed-off-by: Conrad Ratschan <conrad.ratschan@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/spice: bump to version 0.14.3

- Drop patch (already in version) and so autoreconf
- Update indentation in hash file

https://github.com/freedesktop/spice/blob/v0.14.3/CHANGELOG.md

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/spice-protocol: bump to version 0.14.3

- Add link to upstream sha256
- Switch to meson-package
- Update indentation in hash file

https://github.com/freedesktop/spice-protocol/blob/v0.14.3/CHANGELOG.md

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/xvisor: fix build with gcc 10

Fixes:
 - http://autobuild.buildroot.org/results/b6070c0721b33824e71833ce53423979980aa598

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libfuse3: bump to version 3.10.0

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/unrar: bump to version 5.9.4

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qt5/qt5lottie: new package

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

docs/manual: add section about br2-external init

Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
[yann.morin.1998@free.fr:
  - move before skeletons
  - select the custom 'mine' skeleton, not the sysv one
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

system: support br2-external init systems

Some externals may wish to provide custom init systems for tightly
integrated boot. This has been supported through the BR2_INIT_NONE,
however a downside to the BR2_INIT_NONE is it forces the custom init
system to use either skeleton-custom and roll a custom skeleton for
each target, or skeleton-init-none which isn't a complete skeleton.

Allowing br2-external to define custom BR2_INIT_* means they can now
safely 'select' the BR2_PACKAGE_SKELETON_INIT_*, and re-use any of the
skeletons in Buildroot, or one from a br2-external tree.

Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

system: Move skeleton-init-* selection to init

In preparation for supporting br2-external inits, move the 'select' for
the BR2_PACKAGE_SKELETON_INIT_* to their respective init systems. This
will allow a br2-external init to 'select' which skeleton it needs as a
default skeleton.

Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
[yann.morin.1998@free.fr:
  - add comment to init choice, to remind why selecting skeletons is OK
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

docs/manual: add section about br2-external skeleton

Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
[yann.morin.1998@free.fr:
  - alphabetical order (skeleton before toolchain)
  - leave the list of choices 'open'
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

system: support br2-external skeleton packages

Today, the BR2_ROOTFS_SKELETON_CUSTOM is the only way to build a custom
skeleton. But it's limiting as users must provide a pre-built skeleton
for each target. Supporting a br2-external package allows users to build
up a skeleton and customize it with their own KConfig options.

Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/librelp: bump to version 1.8.0

1.8.0 adds support for both openssl and gnutls

Signed-off-by: David GOUARIN <dgouarin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pkg-waf.mk: allow for override of <pkg>_WAF directive

Some packages have their own waf copy, but not located at the
top-level directory. In order to support those packages, we allow
packages to override the default <pkg>_WAF location.

Signed-off-by: David GOUARIN <dgouarin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python3: rebase patches with incorrect offsets for python 3.9.0

This rebases the remaining patches for python 3.9.0 not included in
f26ce577605e843ebf0f5583242ee9ff3cd08ac3.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/jquery: bump to version 3.5.1

Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/systemd: group all journal-remote tools under a single option

The -Dremote=true flag enables three tools: systemd-journal-gatewayd,
systemd-journal-remote and systemd-journal-upload.

It is not possible with simple means to install them seperately. So use
the systemd-journal-remote option to enable or disable them all together.

Drop systemd-journal-gatewayd option and add it to legacy.

Fixes: #12301
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/systemd: use libqrencode independently of remote tools

systemds libqrencode support is independent from journal-gatewayd. In
v247 it will additionally be used in homectl for recovery key
generation.

Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/18xx-ti-utils: use short version string

This is compatible with release-monitoring.org, so it allows easier
tracking of update status.

There appears to be no easy way to use anything other than tag/commit
for _VERSION with the git download method. git.ti.com offers snapshot
download over https, so use use that instead. As added bonus, the https
download method is more firewall friendly.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python3: bump to version 3.9.0

Minimal rebase of patches on 3.9.0.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libuhttpd: bump version to 3.4.0

Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/fakeroot: bump version to 1.25.3

This version adds wrappers for getgroups and statx, the latter is used
by coreutils 8.32.

Removed patches that are now in upstream.

Added a patch to fix failure when installing.

Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/stm32mp157*: bump kernel version

Since kernel 5.7 is EOL now, this upgrades it to version 5.8.13.

Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/stm32mp157*: switch to use TF-A based configurations

This commit changes the stm32mp1 configurations to use the TF-A ->
U-Boot boot flow (called "trusted boot flow" by ST) instead of the
U-Boot SPL -> U-Boot boot flow. ST recommands this trusted boot, and
it's also the only one that allows to use the STM32 Cube Programmer
for reflashing devices.

As part of this, the genimage configuration file is now generated, as
it contains some file names that depend on the platform. Removing
partition-type from genimage.cfg is mandatory, since it would cause a
hybrid MBR partition table to be created, which itself would prevent
ATF from finding the ssbl parition.

Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/uboot: add stm32 binary format

Add `.stm32` binary format that U-Boot generates for the trusted
configuration of STM32MP platforms.

Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/mx6sx_udoo_neo: bump kernel and U-Boot versions

Bump Linux kernel to 5.8.13 and U-Boot to 2020.10.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

config/odroidc2: force host kernel version to 5.7

as the current kernel version used for this board is 5.7,
make sure that the host kernel version is the same to prevent
build failure due to version miss match.

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/779210973

Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/mx6cubox: bump U-Boot version

now, the build requires host-swig
which is given by BR2_TARGET_UBOOT_NEEDS_PYLIBFDT

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sslh: bump to version 1.21c

- Drop patch (already in version)
- libbsd is an optional dependency since version 1.21b and
  https://github.com/yrutschle/sslh/commit/0380a4309f826062a4ab772e65077c0566d8fbd4
- libconfig is optional since version 1.21c and
  https://github.com/yrutschle/sslh/commit/2c93a015ea1d261a934df00285691522e6a6d211
- Update indentation in hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sslh: drop C++ dependency

sslh is written in plain C so drop C++ dependency

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/quazip: fix legal info

Update hash of COPYING (QuaZIP renamed into QuaZip since version 1.0 and
https://github.com/stachenov/quazip/commit/5bd87270bd9c0dbe99c102e5b442e1fe142166be)

While at it, update indentation (two spaces)

Fixes:
 - http://autobuild.buildroot.org/results/4a8dc1be76d9f08d44b158f39734932793348a03

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/snort: bump to version 2.9.16.1

- Added md5 hash provided by upstream.
- Update indentation in hash file (two spaces)
- Fix build failure with gcc 10

Fixes:
 - http://autobuild.buildroot.org/results/16e1fa98a80182d96e62365491d5a71ed269aa47

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/daq: bump version to 2.0.7

- Add a comment about autoreconf
- Update indentation in hash file

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/daq: fix parallel build

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

docs/website: update for 2020.02.7

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2020.02.7

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d8082db677046e004a6537828b3e4f4b9a818a4f)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/website: update for 2020.05.3

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2020.05.3

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 0269b2e6e224bd0ca04e4f25ccef86809108df0c)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/kontron_smarc_sal28: remove kernel config fragment

Starting with linux kernel v5.9 all required configuration options are
available in the default config.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

{linux, linux-headers}: add version 5.9

Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Bilal Wasim <bilal.wasim@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/mx6cubox: bump U-Boot version

Since 2020.04 version, the enumeration of MMC has changed, so the boot
script must be updated

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/chromebook_elm: bump to Linux v5.9

Update the chromebook elm configuration to use v5.9 instead of an
intermediate release candidate.

At the latter stages of the v5.9 release, a patch was added which
broke the Chromebook Elm HDMI. Therefore add a revert patch to get rid
of this problem. The fix (and the revert) are already on the mailing
list (https://lkml.org/lkml/2020/10/10/32) and should become available
with v5.10

Signed-off-by: Bilal Wasim <bilal.wasim@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ruby: bump to 2.7.2

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/zlib-ng: bump to version 1.9.9-b1

Update indentation in hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/zlib: update architectures for zlib-ng

- powerpc is supported since
  https://github.com/zlib-ng/zlib-ng/commit/b81f4ee96dcbdf1db34b00727b6f1829a2ba1edb
- s390x is supported since
  https://github.com/zlib-ng/zlib-ng/commit/8e30d1173699412c11880db10de2bc10893a2448

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/unixodbc: bump to version 2.3.9

- libedit is an optional dependency since version 2.3.9 and
  https://github.com/lurcher/unixODBC/commit/6ebf06767e398dc0b7d4aa090e20f7814c2ae383
- Update indentation in hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/unixodbc: drop non upstreamable patch

Drop patch that is not upstreamable and replace it by using
--{dis,en}able-threads option

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/apparmor: bump to version 3.0.0

This patch bumps apparmor and libapparmor to version 3.0.0

Of all our patches, one was already a backport, one is no longer
applicable (file largely rewritten), and the four others have been
applied upstream now.

The hash for the tarball is available on the homepage, so use that
as a reference.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[yann.morin.1998@free.fr:
  - expand commit log to explain why we drop all the patches
  - add a reference for the hash for the source tarball
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

docs/website: update for 2020.08.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2020.08.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 91107e16a7c2fcbd0b1b73e5a46d295fd9190d17)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/easy-rsa: bump to version 3.0.8

https://github.com/OpenVPN/easy-rsa/releases/tag/v3.0.8

Signed-off-by: Julien Viard de Galbert <julien@vdg.name>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Revert "package/cups-filters: bump to version 1.28.4"

This reverts commit 6afc5eb69649f1629111b47f76bc15bff48a552b.  This should
not have been applied yet, but got pushed by accident.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-sentry-sdk: drop asyncio files for python 2.x to fix pycompile issue

sentry-sdk has a set of optional "integrations", some of which use asyncio.

pycompile unfortunately errors out on these files when running under Python
2.x:

../scripts/pycompile.py ..
error:   File "/usr/lib/python2.7/site-packages/sentry_sdk/integrations/sanic.py", line 64
    async def sentry_handle_request(self, request, *args, **kwargs):
            ^
SyntaxError: invalid syntax

As a workaround, simply drop the unusable files from TARGET_DIR if building
for python 2.x.

Fixes:
http://autobuild.buildroot.net/results/9e4/9e47ee2a56153379e4e7bc839be5972a2302ba9f/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/bash: update to patch level 18

Fixes a regression introduced in patch level 16.

Rename the 2 uClibc patches so the upstream patch numbering matches ours.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-pymodbus: drop asyncio files for python 2.x to fix pycompile issue

Pymodbus has optional support for asyncio.  Pycompile unfortunately errors
out on these files when running under Python 2.x:

../scripts/pycompile.py ..
error:   File "/usr/lib/python2.7/site-packages/pymodbus/client/asynchronous/asyncio/__init__.py", line 257
    yield from self._connect()
             ^
SyntaxError: invalid syntax

As a workaround, simply drop the unusable files from TARGET_DIR if building
for python 2.x.

Fixes:
http://autobuild.buildroot.net/results/cc4/cc48927cbe9ae6c2d8b12d65467ec40df82febf6/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/htpdate: bump to version 1.2.5

Drop now upstreamed patch.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/grep: bump to version 3.5

This patch bumps grep to version 3.5

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/cups-filters: bump to version 1.28.4

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

{linux, linux-headers}: bump 4.19.x / 5.{4, 8}.x series

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/quazip: bump to 1.1

Also dropping upstream patch.
With this release quazip drops the qmake build in favour of cmake.
It still ships the pkgconfig .pc file, so it's possible to link to
it by using CMake's find_package() or with pkgconfig.

Signed-off-by: Zoltan Gyarmati <zgyarmati@zgyarmati.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mongodb: security bump to version 4.2.10

SERVER-50463 Make PooledLDAPConnection::refresh take self-ownership

https://docs.mongodb.com/manual/release-notes/4.2-changelog/#id1

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/zlib-ng: disable tests

Tests are enabled by default and can be disabled since
https://github.com/zlib-ng/zlib-ng/commit/b0730d030a9ce5c53faa88bd8259c9afccce6881

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>