Makefile.in (wide-int-range.o): New.

* Makefile.in (wide-int-range.o): New.
* tree-vrp.c: Move all the wide_int_* functions to...
* wide-int-range.cc: ...here.
* tree-vrp.h: Move all the wide_int_* prototypes to...
* wide-int-range.h: ...here.

From-SVN: r263288

[c++] Don't emit exception tables for UI_NONE

If a target does not support exceptions, it can indicate this by returning
UI_NONE in TARGET_EXCEPT_UNWIND_INFO.  Currently the compiler still emits
exception tables for such a target.

This patch makes sure that no exception tables are emitted if the target does
not support exceptions.  This allows us to remove a workaround in
TARGET_ASM_BYTE_OP in the nvptx port.

Build on x86_64 with nvptx accelerator, and tested libgomp.

Build and reg-tested on x86_64.

2018-08-03  Tom de Vries  <tdevries@suse.de>

* common/config/nvptx/nvptx-common.c (nvptx_except_unwind_info): Return
UI_NONE.
* config/nvptx/nvptx.c (TARGET_ASM_BYTE_OP): Remove define.
* except.c (output_function_exception_table): Do early exit if
targetm_common.except_unwind_info (&global_options) == UI_NONE.

From-SVN: r263287

Print heuristics probability fraction part with 2 digits.

2018-08-03  Martin Liska  <mliska@suse.cz>

* predict.c (dump_prediction): Change to 2 digits
        in fraction part.
2018-08-03  Martin Liska  <mliska@suse.cz>

* gcc.dg/predict-1.c: Adjust scanned pattern to cover 2 digits.
* gcc.dg/predict-13.c:Likewise.
* gcc.dg/predict-3.c:Likewise.
* gcc.dg/predict-4.c:Likewise.
* gcc.dg/predict-5.c:Likewise.
* gcc.dg/predict-6.c:Likewise.
* gcc.dg/predict-9.c:Likewise.
* gfortran.dg/predict-1.f90:Likewise.

From-SVN: r263286

[aarch64] Fix falkor pipeline description for dup<q>

There was a typo in the pipeline description where DUP was assigned to
the vector pipes for quad mode ops when it really only uses the VTOG
pipes.  Fixing this does not show any noticeable difference in
performance (there's a very small bump of 1.7% in x264 but that's
about it) in my tests but is the more precise description of operations
for falkor.

* config/aarch64/falkor.md (falkor_am_1_vxvy_vxvy): Move
neon_dup_q to...
(falkor_am_1_gtov_gtov): ... a new insn reservation.

From-SVN: r263285

Daily bump.

From-SVN: r263284

nds32.c (nds32_hard_regno_mode_ok): Replace > with >=.

* config/nds32/nds32.c (nds32_hard_regno_mode_ok): Replace > with >=.
* df-problems.c (df_remove_dead_eq_notes): Replace > with >=.
* dwarf2out.c (mem_loc_descriptor): Replace > with >=.
* lra-constraints.c (spill_hard_reg_in_range): Replace <= with <.
* lra-remat.c (call_used_input_regno_present_p): Replace <= with <.

From-SVN: r263280

Fix memory leak of pretty_printer prefixes

We were rather sloppy about handling the ownership of prefixes for
pretty_printer, and this lead to a memory leak for any time a
diagnostic_show_locus call emits multiple line spans.

This showed up in "make selftest-valgrind" as:

3,976 bytes in 28 blocks are definitely lost in loss record 632 of 669
   at 0x4A0645D: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
   by 0x1F08227: xmalloc (xmalloc.c:147)
   by 0x1F083E6: xvasprintf (xvasprintf.c:58)
   by 0x1E7EC7D: build_message_string(char const*, ...) (diagnostic.c:78)
   by 0x1E7F438: diagnostic_get_location_text(diagnostic_context*, expanded_location) (diagnostic.c:328)
   by 0x1E7FD54: default_diagnostic_start_span_fn(diagnostic_context*, expanded_location) (diagnostic.c:626)
   by 0x1EB3508: selftest::test_diagnostic_context::start_span_cb(diagnostic_context*, expanded_location) (selftest-diagnostic.c:57)
   by 0x1E89215: diagnostic_show_locus(diagnostic_context*, rich_location*, diagnostic_t) (diagnostic-show-locus.c:1992)
   by 0x1E8ECAD: selftest::test_fixit_insert_containing_newline_2(selftest::line_table_case const&) (diagnostic-show-locus.c:3044)
   by 0x1EB0606: selftest::for_each_line_table_case(void (*)(selftest::line_table_case const&)) (input.c:3525)
   by 0x1E8F3F5: selftest::diagnostic_show_locus_c_tests() (diagnostic-show-locus.c:3164)
   by 0x1E010BF: selftest::run_tests() (selftest-run-tests.c:88)

4,004 bytes in 28 blocks are definitely lost in loss record 633 of 669
   at 0x4A0645D: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
   by 0x1F08227: xmalloc (xmalloc.c:147)
   by 0x1F083E6: xvasprintf (xvasprintf.c:58)
   by 0x1E7EC7D: build_message_string(char const*, ...) (diagnostic.c:78)
   by 0x1E7F438: diagnostic_get_location_text(diagnostic_context*, expanded_location) (diagnostic.c:328)
   by 0x1E7FD54: default_diagnostic_start_span_fn(diagnostic_context*, expanded_location) (diagnostic.c:626)
   by 0x1EB3508: selftest::test_diagnostic_context::start_span_cb(diagnostic_context*, expanded_location) (selftest-diagnostic.c:57)
   by 0x1E89215: diagnostic_show_locus(diagnostic_context*, rich_location*, diagnostic_t) (diagnostic-show-locus.c:1992)
   by 0x1E8B373: selftest::test_diagnostic_show_locus_fixit_lines(selftest::line_table_case const&) (diagnostic-show-locus.c:2500)
   by 0x1EB0606: selftest::for_each_line_table_case(void (*)(selftest::line_table_case const&)) (input.c:3525)
   by 0x1E8F3B9: selftest::diagnostic_show_locus_c_tests() (diagnostic-show-locus.c:3159)
   by 0x1E010BF: selftest::run_tests() (selftest-run-tests.c:88)

This patch fixes the leaks by ensuring that the pretty_printer "owns"
the prefix if it's non-NULL, freeing it in the dtor and in pp_set_prefix.

gcc/cp/ChangeLog:
* error.c (cxx_print_error_function): Duplicate "file" before
passing it to pp_set_prefix.
(cp_print_error_function): Use pp_take_prefix when saving the
existing prefix.

gcc/ChangeLog:
* diagnostic-show-locus.c (diagnostic_show_locus): Use
pp_take_prefix when saving the existing prefix.
* diagnostic.c (diagnostic_append_note): Likewise.
* langhooks.c (lhd_print_error_function): Likewise.
* pretty-print.c (pp_set_prefix): Drop the "const" from "prefix"
param's type.  Free the existing prefix.
(pp_take_prefix): New function.
(pretty_printer::pretty_printer): Drop the prefix parameter.
Rename the length parameter to match the comment.
(pretty_printer::~pretty_printer): Free the prefix.
* pretty-print.h (pretty_printer::pretty_printer): Drop the prefix
parameter.
(struct pretty_printer): Drop the "const" from "prefix" field's
type and clarify memory management.
(pp_set_prefix): Drop the "const" from the 2nd param.
(pp_take_prefix): New decl.

From-SVN: r263275

rs6000-string.c (select_block_compare_mode): Move test for word_mode_ok here instead of passing as argument.

2018-07-31  Aaron Sawdey  <acsawdey@linux.ibm.com>

* config/rs6000/rs6000-string.c (select_block_compare_mode): Move test
for word_mode_ok here instead of passing as argument.
(expand_block_compare): Change select_block_compare_mode() call.
(expand_strncmp_gpr_sequence): New function.
(expand_strn_compare): Make use of expand_strncmp_gpr_sequence.

From-SVN: r263273

re PR target/86790 (m68k port needs updating for CVE-2017-5753)

PR target/86790
* config/m68k/m68k.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
Define to speculation_safe_value_not_needed.

From-SVN: r263272

[OBVIOUS] Correct name of file in ChangeLog

Committed on behalf of Matthew Malcomson.

From-SVN: r263271

re PR target/86784 (H8 port needs updating for CVE-2017-5753)

PR target/86784
* config/h8300/h8300.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
Define to speculation_safe_value_not_needed.

From-SVN: r263270

arm - correctly handle denormal results during softfp subtraction

2018-08-02  Nicolas Pitre <nico@fluxnic.net>

PR libgcc/86512
* config/arm/ieee754-df.S (adddf3): Don't shortcut denormal handling
when exponent goes negative. Update my email address.
* config/arm/ieee754-sf.S (addsf3): Likewise.

From-SVN: r263267

re PR target/86813 (xstormy16 port needs updating for CVE-2017-5753)

PR target/86813
* config/stormy16/stormy16.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
Define to speculation_safe_value_not_needed.

From-SVN: r263266

[nvptx] Ignore c++ exceptions

The nvptx port can't support exceptions using sjlj, because ptx does not
support sjlj.  However, default_except_unwind_info still returns UI_SJLJ, even
even if we configure with --disable-sjlj-exceptions, because UI_SJLJ is the
fallback option.

The reason default_except_unwind_info doesn't return UI_DWARF2 is because
DWARF2_UNWIND_INFO is not defined in defaults.h, because
INCOMING_RETURN_ADDR_RTX is not defined, because there's no ptx equivalent.

Testcase libgomp.c++/for-15.C currently doesn't compile unless fno-exceptions
is added because:
- it tries to generate sjlj exception handling code, and
- it tries to generate exception tables using label-addressed .byte sequence.
  Ptx doesn't support generating random data at a label, nor being able to
  load/write data relative to a label.

This patch fixes the first problem by using UI_TARGET for nvptx.

The second problem is worked around by generating all .byte sequences commented
out.  It would be better to have a narrower workaround, and define
TARGET_ASM_BYTE_OP to "error: .byte unsupported " or some such.

This patch does not enable exceptions for nvptx, it merely allows c++ programs
to run correctly if they do no use exception handling.

Build and reg-tested on x86_64 with nvptx accelerator.

2018-08-02  Tom de Vries  <tdevries@suse.de>

PR target/86660
* common/config/nvptx/nvptx-common.c (nvptx_except_unwind_info): New
function.  Return UI_TARGET unconditionally.
(TARGET_EXCEPT_UNWIND_INFO): Redefine to nvptx_except_unwind_info.
* config/nvptx/nvptx.c (TARGET_ASM_BYTE_OP): Emit commented out '.byte'.

* testsuite/libgomp.oacc-c++/routine-1-auto.C: Remove -fno-exceptions.
* testsuite/libgomp.oacc-c++/routine-1-template-auto.C: Same.
* testsuite/libgomp.oacc-c++/routine-1-template-trailing-return-type.C:
Same.
* testsuite/libgomp.oacc-c++/routine-1-template.C: Same.
* testsuite/libgomp.oacc-c++/routine-1-trailing-return-type.C: Same.
* testsuite/libgomp.oacc-c-c++-common/routine-1.c: Same.

From-SVN: r263265

re PR target/86810 (v850 port needs updating for CVE-2017-5753)

PR target/86810
* config/v850/v850.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
Define to speculation_safe_value_not_needed.

From-SVN: r263264

re PR target/86803 (rx port needs updating for CVE-2017-5753)

PR target/86803
* config/rx/rx.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
Define to speculation_safe_value_not_needed.

From-SVN: r263263

Typo fix

Noticed by Tamar (thanks).

2018-08-02  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* genemit.c (print_overload_test): Fix typo.

From-SVN: r263262

re PR c++/86763 (Wrong code comparing member of copy of a 237 byte object with nontrivial default constructor on x86-64 arch)

2018-08-02  Richard Biener  <rguenther@suse.de>

PR c++/86763
* class.c (layout_class_type): Copy TYPE_TYPELESS_STORAGE
to the CLASSTYPE_AS_BASE.

* g++.dg/torture/pr86763.C: New testcase.

From-SVN: r263261

re PR target/86797 (msp430 port needs updating for CVE-2017-5753)

PR target/86797
* config/msp430/msp430.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
Define to speculation_safe_value_not_needed.

From-SVN: r263259

re PR target/86791 (mcore port needs updating for CVE-2017-5753)

PR target/86791
* config/mcore/mcore.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
Define to speculation_safe_value_not_needed.

From-SVN: r263258

re PR tree-optimization/86816 (ICE: SIGSEGV in tree-ssa-pre / tail_merge_optimize)

2018-08-02  Richard Biener  <rguenther@suse.de>

PR tree-optimization/86816
* tree-ssa-tail-merge.c (tail_merge_valueize): New function
which checks for value availability before querying it.
(gvn_uses_equal): Use it.
(same_succ_hash): Likewise.
(gimple_equal_p): Likewise.

* g++.dg/torture/pr86816.C: New testcase.

From-SVN: r263257

re PR target/86789 (m32r port needs updating for CVE-2017-5753)

PR target/86789
* config/m32r/m32r.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
Define to speculation_safe_value_not_needed.

From-SVN: r263256

re PR target/86787 (iq2000 port needs updating for CVE-2017-5753)

PR target/86787
* config/iq2000/iq2000.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
Define to speculation_safe_value_not_needed.

From-SVN: r263255

re PR target/86782 (frv port needs updating for CVE-2017-5753)

PR target/86782
* config/frv/frv.c (TARGET_HAVE_SPECULATION_SAFE_VALUE): Define to
speculation_safe_value_not_needed.

From-SVN: r263254

re PR target/86781 (fr30 port needs updating for CVE-2017-5753)

PR target/86781
* config/fr30/fr30.c (TARGET_HAVE_SPECULATION_SAFE_VALUE): Define to
speculation_safe_value_not_needed.

From-SVN: r263253

Revert "[ARM] Fix PR85434: spilling of stack protector guard's address on ARM"

This reverts commit r263245.

From-SVN: r263252

[gen/AArch64] Generate helpers for substituting iterator values into pattern names

Given a pattern like:

  (define_insn "aarch64_frecpe<mode>" ...)

the SVE ACLE implementation wants to generate the pattern for a
particular (non-constant) mode.  This patch automatically generates
helpers to do that, specifically:

  // Return CODE_FOR_nothing on failure.
  insn_code maybe_code_for_aarch64_frecpe (machine_mode);

  // Assert that the code exists.
  insn_code code_for_aarch64_frecpe (machine_mode);

  // Return NULL_RTX on failure.
  rtx maybe_gen_aarch64_frecpe (machine_mode, rtx, rtx);

  // Assert that generation succeeds.
  rtx gen_aarch64_frecpe (machine_mode, rtx, rtx);

Many patterns don't have sensible names when all <...>s are removed.
E.g. "<optab><mode>2" would give a base name "2".  The new functions
therefore require explicit opt-in, which should also help to reduce
code bloat.

The (arbitrary) opt-in syntax I went for was to prefix the pattern
name with '@', similarly to the existing '*' marker.

The patch also makes config/aarch64 use the new routines in cases where
they obviously apply.  This was mostly straight-forward, but it seemed
odd that we defined:

   aarch64_reload_movcp<...><P:mode>

but then only used it with DImode, never SImode.  If we should be
using Pmode instead of DImode, then that's a simple change,
but should probably be a separate patch.

2018-08-02  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* doc/md.texi: Expand the documentation of instruction names
to mention port-local uses.  Document '@' in pattern names.
* read-md.h (overloaded_instance, overloaded_name): New structs.
(mapping): Declare.
(md_reader::handle_overloaded_name): New member function.
(md_reader::get_overloads): Likewise.
(md_reader::m_first_overload): New member variable.
(md_reader::m_next_overload_ptr): Likewise.
(md_reader::m_overloads_htab): Likewise.
* read-md.c (md_reader::md_reader): Initialize m_first_overload,
m_next_overload_ptr and m_overloads_htab.
* read-rtl.c (iterator_group): Add "type" and "get_c_token" fields.
(get_mode_token, get_code_token, get_int_token): New functions.
(map_attr_string): Add an optional argument that passes back
the associated iterator.
(overloaded_name_hash, overloaded_name_eq_p, named_rtx_p):
(md_reader::handle_overloaded_name, add_overload_instance): New
functions.
(apply_iterators): Handle '@' names.  Report an error if '@'
is used without iterators.
(initialize_iterators): Initialize the new iterator_group fields.
* genopinit.c (handle_overloaded_code_for)
(handle_overloaded_gen): New functions.
(main): Use them to print declarations of maybe_code_for_* and
maybe_gen_* functions, and inline definitions of code_for_* and gen_*.
* genemit.c (print_overload_arguments, print_overload_test)
(handle_overloaded_code_for, handle_overloaded_gen): New functions.
(main): Use it to print definitions of maybe_code_for_* and
maybe_gen_* functions.
* config/aarch64/aarch64.c (aarch64_split_128bit_move): Use
gen_aarch64_mov{low,high}_di and gen_aarch64_movdi_{low,high}
instead of explicit mode checks.
(aarch64_split_simd_combine): Likewise gen_aarch64_simd_combine.
(aarch64_split_simd_move): Likewise gen_aarch64_split_simd_mov.
(aarch64_emit_load_exclusive): Likewise gen_aarch64_load_exclusive.
(aarch64_emit_store_exclusive): Likewise gen_aarch64_store_exclusive.
(aarch64_expand_compare_and_swap): Likewise
gen_aarch64_compare_and_swap and gen_aarch64_compare_and_swap_lse
(aarch64_gen_atomic_cas): Likewise gen_aarch64_atomic_cas.
(aarch64_emit_atomic_swap): Likewise gen_aarch64_atomic_swp.
(aarch64_constant_pool_reload_icode): Delete.
(aarch64_secondary_reload): Use code_for_aarch64_reload_movcp
instead of aarch64_constant_pool_reload_icode.  Use
code_for_aarch64_reload_mov instead of explicit mode checks.
(rsqrte_type, get_rsqrte_type, rsqrts_type, get_rsqrts_type): Delete.
(aarch64_emit_approx_sqrt): Use gen_aarch64_rsqrte instead of
get_rsqrte_type and gen_aarch64_rsqrts instead of gen_rqrts_type.
(recpe_type, get_recpe_type, recps_type, get_recps_type): Delete.
(aarch64_emit_approx_div): Use gen_aarch64_frecpe instead of
get_recpe_type and gen_aarch64_frecps instead of get_recps_type.
(aarch64_atomic_load_op_code): Delete.
(aarch64_emit_atomic_load_op): Likewise.
(aarch64_gen_atomic_ldop): Use UNSPECV_ATOMIC_* instead of
aarch64_atomic_load_op_code.  Use gen_aarch64_atomic_load
instead of aarch64_emit_atomic_load_op.
* config/aarch64/aarch64.md (aarch64_reload_movcp<GPF_TF:mode><P:mode>)
(aarch64_reload_movcp<VALL:mode><P:mode>, aarch64_reload_mov<mode>)
(aarch64_movdi_<mode>low, aarch64_movdi_<mode>high)
(aarch64_mov<mode>high_di, aarch64_mov<mode>low_di): Add a '@'
character before the pattern name.
* config/aarch64/aarch64-simd.md (aarch64_split_simd_mov<mode>)
(aarch64_rsqrte<mode>, aarch64_rsqrts<mode>)
(aarch64_simd_combine<mode>, aarch64_frecpe<mode>)
(aarch64_frecps<mode>): Likewise.
* config/aarch64/atomics.md (atomic_compare_and_swap<mode>)
(aarch64_compare_and_swap<mode>, aarch64_compare_and_swap<mode>_lse)
(aarch64_load_exclusive<mode>, aarch64_store_exclusive<mode>)
(aarch64_atomic_swp<mode>, aarch64_atomic_cas<mode>)
(aarch64_atomic_load<atomic_ldop><mode>): Likewise.

From-SVN: r263251

[AArch64] Add support for 16-bit FMOV immediates

aarch64_float_const_representable_p was still returning false for
HFmode, so we wouldn't use 16-bit FMOV immediate.  E.g. before the
patch:

    __fp16 foo (void) { return 0x1.1p-3; }

gave:

       mov     w0, 12352
       fmov    h0, w0

with -march=armv8.2-a+fp16, whereas now it gives:

       fmov    h0, 1.328125e-1

2018-08-02  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* config/aarch64/aarch64.c (aarch64_float_const_representable_p):
Allow HFmode constants if TARGET_FP_F16INST.

gcc/testsuite/
* gcc.target/aarch64/f16_mov_immediate_1.c: Expect fmov immediate
to be used.
* gcc.target/aarch64/f16_mov_immediate_2.c: Likewise.
* gcc.target/aarch64/f16_mov_immediate_3.c: Force +nofp16.
* gcc.target/aarch64/sve/single_1.c: Except fmov immediate to be used
for .h.
* gcc.target/aarch64/sve/single_2.c: Likewise.
* gcc.target/aarch64/sve/single_3.c: Likewise.
* gcc.target/aarch64/sve/single_4.c: Likewise.

From-SVN: r263250

re PR target/86014 ([AArch64] missed LDP optimization)

gcc/
2018-08-02  Jackson Woodruff  <jackson.woodruff@arm.com>

PR target/86014
* config/aarch64/aarch64.c (aarch64_operands_adjust_ok_for_ldpstp):
No longer check last store for clobber of address register.

gcc/testsuite
2018-08-02  Jackson Woodruff  <jackson.woodruff@arm.com>

PR target/86014
* gcc.target/aarch64/ldp_stp_13.c: New test.

From-SVN: r263249

Fix gcov misleading error (PR gcov-profile/86817).

2018-08-02  Martin Liska  <mliska@suse.cz>

        PR gcov-profile/86817
* gcov.c (process_all_functions): New function.
(main): Call it.
(process_file): Move functions processing to
        process_all_functions.

From-SVN: r263248

Cherry-pick compiler-rt revision 338606 (PR sanitizer/86022).

Fix sizeof(struct pthread) in glibc 2.14.

2018-08-02  Martin Liska  <mliska@suse.cz>

        PR sanitizer/86022
* sanitizer_common/sanitizer_linux_libcdep.cc (ThreadDescriptorSize):
        Cherry-pick compiler-rt revision 338606.

From-SVN: r263246

[ARM] Fix PR85434: spilling of stack protector guard's address on ARM

In case of high register pressure in PIC mode, address of the stack
protector's guard can be spilled on ARM targets as shown in PR85434,
thus allowing an attacker to control what the canary would be compared
against. This is also known as CVE-2018-12886. ARM does lack
stack_protect_set and stack_protect_test insn patterns, defining them
does not help as the address is expanded regularly and the patterns
only deal with the copy and test of the guard with the canary.

This problem does not occur for x86 targets because the PIC access and
the test can be done in the same instruction. Aarch64 is exempt too
because PIC access insn pattern are mov of UNSPEC which prevents it from
the second access in the epilogue being CSEd in cse_local pass with the
first access in the prologue.

The approach followed here is to create new "combined" set and test
standard pattern names that take the unexpanded guard and do the set or
test. This allows the target to use an opaque pattern (eg. using UNSPEC)
to hide the individual instructions being generated to the compiler and
split the pattern into generic load, compare and branch instruction
after register allocator, therefore avoiding any spilling. This is here
implemented for the ARM targets. For targets not implementing these new
standard pattern names, the existing stack_protect_set and
stack_protect_test pattern names are used.

To be able to split PIC access after register allocation, the functions
had to be augmented to force a new PIC register load and to control
which register it loads into. This is because sharing the PIC register
between prologue and epilogue could lead to spilling due to CSE again
which an attacker could use to control what the canary gets compared
against.

2018-08-02  Thomas Preud'homme  <thomas.preudhomme@linaro.org>

    gcc/
    PR target/85434
    * target-insns.def (stack_protect_combined_set): Define new standard
    pattern name.
    (stack_protect_combined_test): Likewise.
    * cfgexpand.c (stack_protect_prologue): Try new
    stack_protect_combined_set pattern first.
    * function.c (stack_protect_epilogue): Try new
    stack_protect_combined_test pattern first.
    * config/arm/arm.c (require_pic_register): Add pic_reg and compute_now
    parameters to control which register to use as PIC register and force
    reloading PIC register respectively.  Insert in the stream of insns if
    possible.
    (legitimize_pic_address): Expose above new parameters in prototype and
    adapt recursive calls accordingly.
    (arm_legitimize_address): Adapt to new legitimize_pic_address
    prototype.
    (thumb_legitimize_address): Likewise.
    (arm_emit_call_insn): Adapt to new require_pic_register prototype.
    * config/arm/arm-protos.h (legitimize_pic_address): Adapt to prototype
    change.
    * config/arm/arm.md (movsi expander): Adapt to legitimize_pic_address
    prototype change.
    (stack_protect_combined_set): New insn_and_split pattern.
    (stack_protect_set): New insn pattern.
    (stack_protect_combined_test): New insn_and_split pattern.
    (stack_protect_test): New insn pattern.
    * config/arm/unspecs.md (UNSPEC_SP_SET): New unspec.
    (UNSPEC_SP_TEST): Likewise.
    * doc/md.texi (stack_protect_combined_set): Document new standard
    pattern name.
    (stack_protect_set): Clarify that the operand for guard's address is
    legal.
    (stack_protect_combined_test): Document new standard pattern name.
    (stack_protect_test): Clarify that the operand for guard's address is
    legal.

    gcc/testsuite/
    PR target/85434
    * gcc.target/arm/pr85434.c: New test.

From-SVN: r263245

dumpfile.c/h: add "const" to dump location ctors

gcc/ChangeLog:
* dumpfile.c (dump_user_location_t::dump_user_location_t): Add
"const" to the "gimple *" and "rtx_insn *" parameters.
* dumpfile.h (dump_user_location_t::dump_user_location_t):
Likewise.
(dump_location_t::dump_location_t): Likewise.

From-SVN: r263244

Daily bump.

From-SVN: r263243

PR tree-optimization/86650 - -Warray-bounds missing inlining context

gcc/c/ChangeLog:

PR tree-optimization/86650
* c-objc-common.c (c_tree_printer): Move usage of EXPR_LOCATION (t)
and TREE_BLOCK (t) from within percent_K_format to this callsite.

gcc/c-family/ChangeLog:

PR tree-optimization/86650
* c-family/c-format.c (gcc_tdiag_char_table): Update comment for "%G".
(gcc_cdiag_char_table, gcc_cxxdiag_char_table): Same.
  (init_dynamic_diag_info): Update from "gcall *" to "gimple *".
  * c-format.h (T89_G): Update to be "gimple *" rather than
  "gcall *".
(local_gcall_ptr_node): Rename...
  (local_gimple_ptr_node): ...to this.

gcc/cp/ChangeLog:

PR tree-optimization/86650
* error.c (cp_printer): Move usage of EXPR_LOCATION (t) and
TREE_BLOCK (t) from within percent_K_format to this callsite.

gcc/ChangeLog:

PR tree-optimization/86650
* gimple-pretty-print.c (percent_G_format): Accept a "gimple *"
rather than a "gcall *".  Directly pass the data of interest
  to percent_K_format, rather than building a temporary CALL_EXPR
  to hold it.
* gimple-fold.c (gimple_fold_builtin_strncpy): Adjust.
(gimple_fold_builtin_strncat): Adjust.
* gimple-ssa-warn-restrict.h (check_bounds_or_overlap): Replace
gcall* argument with gimple*.
* gimple-ssa-warn-restrict.c (check_call): Same.
(wrestrict_dom_walker::before_dom_children): Same.
(builtin_access::builtin_access): Same.
(check_bounds_or_overlap): Same
(maybe_diag_overlap): Same.
(maybe_diag_offset_bounds): Same.
* tree-diagnostic.c (default_tree_printer): Move usage of
EXPR_LOCATION (t) and TREE_BLOCK (t) from within percent_K_format
to this callsite.
* tree-pretty-print.c (percent_K_format): Add argument.
* tree-pretty-print.h: Add argument.
* tree-ssa-ccp.c (pass_post_ipa_warn::execute): Adjust.
* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Adjust.
(maybe_diag_stxncpy_trunc): Same.
(handle_builtin_stxncpy): Same.
(handle_builtin_strcat): Same.

gcc/testsuite/ChangeLog:

PR tree-optimization/86650
* gcc.dg/format/gcc_diag-10.c: Adjust.

From-SVN: r263239

xcoff.c (struct xcoff_line, [...]): Remove.

* xcoff.c (struct xcoff_line, struct xcoff_line_vector): Remove.
(struct xcoff_func, struct xcoff_func_vector): New structs.
(xcoff_syminfo): Drop leading dot from symbol name.
(xcoff_line_compare, xcoff_line_search): Remove.
(xcoff_func_compare, xcoff_func_search): New static functions.
(xcoff_lookup_pc): Search function table.
(xcoff_add_line, xcoff_process_linenos): Remove.
(xcoff_initialize_fileline): Build function table.

From-SVN: r263238

[libgomp] Truncate config/nvptx/oacc-parallel.c

libgomp/
* config/nvptx/oacc-parallel.c: Truncate.

Co-Authored-By: James Norris <jnorris@codesourcery.com>
Co-Authored-By: Thomas Schwinge <thomas@codesourcery.com>
From-SVN: r263236

Add -D_GLIBCXX_ASSERTIONS to DEBUG_FLAGS

Enable assertions in the extra debug library built when
--enable-libstdcxx-debug is used. Replace some Debug Mode assertions
in src/c++11/futex.cc with __glibcxx_assert, because the library will
never be built with Debug Mode.

* configure: Regenerate.
* configure.ac: Add -D_GLIBCXX_ASSERTIONS to default DEBUG_FLAGS.
* src/c++11/futex.cc: Use __glibcxx_assert instead of
_GLIBCXX_DEBUG_ASSERT.

From-SVN: r263235

Cherry-pick compiler-rt revision 318044 and 319180.

    [PowerPC][tsan] Update tsan to handle changed memory layouts in newer kernels

    In more recent Linux kernels with 47 bit VMAs the layout of virtual memory
    for powerpc64 changed causing the thread sanitizer to not work properly. This
    patch adds support for 47 bit VMA kernels for powerpc64.

    Tested on several 4.x and 3.x kernel releases.

Regtested/bootstrapped on ppc64le-linux with kernel 4.14; applying to
trunk/8.3.

2018-08-01  Marek Polacek  <polacek@redhat.com>

PR sanitizer/86759
* tsan/tsan_platform.h: Cherry-pick compiler-rt revision 318044.
* tsan/tsan_platform_linux.cc: Cherry-pick compiler-rt revision
319180.

From-SVN: r263229

[AArch64] Update expected output for sve/var_stride_[24].c

After Segher's recent combine change, these tests now use a single
instruction to do the "and" and "lsl 10".  This is a good thing,
so the patch updates the expected output accordingly.

2018-08-01  Richard Sandiford  <richard.sandiford@arm.com>

gcc/testsuite/
* gcc.target/aarch64/sve/var_stride_2.c: Update expected form
of range check.
* gcc.target/aarch64/sve/var_stride_4.c: Likewise.

From-SVN: r263228

[AArch64] XFAIL sve/vcond_[45].c tests

See PR 86753 for details.

2018-08-01  Richard Sandiford  <richard.sandiford@arm.com>

gcc/testsuite/
PR target/86753
* gcc.target/aarch64/sve/vcond_4.c: XFAIL positive tests.
* gcc.target/aarch64/sve/vcond_5.c: Likewise.

From-SVN: r263227

Fold pointer range checks with equal spans

When checking whether vectorised accesses at A and B are independent,
the vectoriser falls back to tests of the form:

    A + size <= B || B + size <= A

But in the common case that "size" is just the constant size of a vector
(or a small multiple), it would be more efficient to do:

   (size_t) (A + (size - 1) - B) > (size - 1) * 2

This patch adds folds to do that.  E.g. before the patch, the alias
checks for:

  for (int j = 0; j < n; ++j)
    {
      for (int i = 0; i < 16; ++i)
a[i] = (b[i] + c[i]) >> 1;
      a += step;
      b += step;
      c += step;
    }

were:

add     x7, x1, 15
add     x5, x0, 15
cmp     x0, x7
add     x7, x2, 15
ccmp    x1, x5, 2, ls
cset    w8, hi
cmp     x0, x7
ccmp    x2, x5, 2, ls
cset    w4, hi
tst     w8, w4

while after the patch they're:

add     x0, x0, 15
sub     x6, x0, x1
sub     x5, x0, x2
cmp     x6, 30
ccmp    x5, 30, 0, hi

The old scheme needs:

[A] one addition per vector pointer
[B] two comparisons and one IOR per range check

The new one needs:

[C] less than one addition per vector pointer
[C] one subtraction and one comparison per range check

The range checks are then ANDed together, with the same number of
ANDs either way.

With conditional comparisons (such as on AArch64), we're able to remove
the IOR between comparisons in the old scheme, but then need an explicit
AND or branch when combining the range checks, as the example above shows.
With the new scheme we can instead use conditional comparisons for
the AND chain.

So even with conditional comparisons, the new scheme should in practice
be a win in almost all cases.  Without conditional comparisons, the new
scheme removes at least one operation from [A] and one operation per
range check from [B], so should always give fewer operations overall.

2018-07-20  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* match.pd: Optimise pointer range checks.

gcc/testsuite/
* gcc.dg/pointer-range-check-1.c: New test.
* gcc.dg/pointer-range-check-2.c: Likewise.

From-SVN: r263226

Use steady_clock to implement condition_variable::wait_for

The C++ standard says that std::condition_variable::wait_for should be
implemented to be equivalent to:

  return wait_until(lock, chrono::steady_clock::now() + rel_time);

But the existing implementation uses chrono::system_clock. Now that
wait_until has potentially-different behaviour for chrono::steady_clock,
let's at least try to wait using the correct clock.

2018-08-01  Mike Crowe  <mac@mcrowe.com>

* include/std/condition_variable (wait_for): Use steady_clock.

From-SVN: r263225

Report early wakeup of condition_variable::wait_until as no_timeout

As currently implemented, condition_variable always ultimately waits
against std::chrono::system_clock. This clock can be changed in arbitrary
ways by the user which may result in us waking up too early or too late
when measured against the caller-supplied clock.

We can't (yet) do much about waking up too late (PR 41861), but
if we wake up too early we must return cv_status::no_timeout to indicate a
spurious wakeup rather than incorrectly returning cv_status::timeout.

2018-08-01  Mike Crowe  <mac@mcrowe.com>

* include/std/condition_variable (wait_until): Only report timeout
if we really have timed out when measured against the
caller-supplied clock.
* testsuite/30_threads/condition_variable/members/2.cc: Add test
case to confirm above behaviour.

From-SVN: r263224

Fix PR number

From-SVN: r263223

Fix remove_stmt in vectorizable_simd_clone_call (PR 86758)

vectorizable_simd_clone_call was trying to remove a pattern statement
instead of the original statement,  Fixes existing tests
gcc.dg/pr84452.c and gcc.target/i386/pr84309.c on x86.

2018-08-01  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
PR tree-optimization/86748
* tree-vect-stmts.c (vectorizable_simd_clone_call): Don't try
to remove pattern statements.

From-SVN: r263222

[07/11] Use single basic block array in loop_vec_info

_loop_vec_info::_loop_vec_info used get_loop_array to get the
order of the blocks when creating stmt_vec_infos, but then used
dfs_enumerate_from to get the order of the blocks that the rest
of the vectoriser uses.  We should be able to use that order
for creating stmt_vec_infos too.

2018-08-01  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Use the
result of dfs_enumerate_from when constructing stmt_vec_infos,
instead of additionally calling get_loop_body.

From-SVN: r263221

[06/11] Handle VMAT_INVARIANT separately

Invariant loads were handled as a variation on the code for contiguous
loads.  We detected whether they were invariant or not as a byproduct of
creating the vector pointer ivs: vect_create_data_ref_ptr passed back an
inv_p to say whether the pointer was invariant.

But vectorised invariant loads just keep the original scalar load,
so this meant that detecting invariant loads had the side-effect of
creating an unwanted vector pointer iv.  The placement of the code
also meant that we'd create a vector load and then not use the result.
In principle this is wrong code, since there's no guarantee that there's
a vector's worth of accessible data at that address, but we rely on DCE
to get rid of the load before any harm is done.

E.g., for an invariant load in an inner loop (which seems like the more
common use case for this code), we'd create:

   vectp_a.6_52 = &a + 4;

   # vectp_a.5_53 = PHI <vectp_a.5_54(9), vectp_a.6_52(2)>

   # vectp_a.5_55 = PHI <vectp_a.5_53(3), vectp_a.5_56(10)>

   vect_next_a_11.7_57 = MEM[(int *)vectp_a.5_55];
   next_a_11 = a[_1];
   vect_cst__58 = {next_a_11, next_a_11, next_a_11, next_a_11};

   vectp_a.5_56 = vectp_a.5_55 + 4;

   vectp_a.5_54 = vectp_a.5_53 + 0;

whereas all we want is:

   next_a_11 = a[_1];
   vect_cst__58 = {next_a_11, next_a_11, next_a_11, next_a_11};

This patch moves the handling to its own block and makes
vect_create_data_ref_ptr assert (when creating a full iv) that the
address isn't invariant.

The ncopies handling is unfortunate, but a preexisting issue.
Richi's suggestion of using a vector of vector statements would
let us reuse one statement for all copies.

2018-08-01  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* tree-vectorizer.h (vect_create_data_ref_ptr): Remove inv_p
parameter.
* tree-vect-data-refs.c (vect_create_data_ref_ptr): Likewise.
When creating an iv, assert that the step is not known to be zero.
(vect_setup_realignment): Update call accordingly.
* tree-vect-stmts.c (vectorizable_store): Likewise.
(vectorizable_load): Likewise.  Handle VMAT_INVARIANT separately.

From-SVN: r263220

[05/11] Add a vect_stmt_to_vectorize helper function

This patch adds a helper that does the opposite of vect_orig_stmt:
go from the original scalar statement to the statement that should
actually be vectorised.

The use in the last two hunks of vectorizable_reduction are because
reduc_stmt_info (first hunk) and stmt_info (second hunk) are already
pattern statements if appropriate.

2018-08-01  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* tree-vectorizer.h (vect_stmt_to_vectorize): New function.
* tree-vect-loop.c (vect_update_vf_for_slp): Use it.
(vectorizable_reduction): Likewise.
* tree-vect-slp.c (vect_analyze_slp_instance): Likewise.
(vect_detect_hybrid_slp_stmts): Likewise.
* tree-vect-stmts.c (vect_is_simple_use): Likewise.

From-SVN: r263219

tree-vrp (zero_nonzero_bits_from_bounds): Rename to...

* tree-vrp (zero_nonzero_bits_from_bounds): Rename to...
(wide_int_set_zero_nonzero_bits): ...this.
(zero_nonzero_bits_from_vr): Rename to...
(vrp_set_zero_nonzero_bits): ...this.
(extract_range_from_multiplicative_op_1): Abstract wide int
code...
(wide_int_range_multiplicative_op): ...here.
(extract_range_from_binary_expr_1): Extract wide int binary
operations into their own functions.
(wide_int_range_lshift): New.
(wide_int_range_can_optimize_bit_op): New.
(wide_int_range_shift_undefined_p): New.
(wide_int_range_bit_xor): New.
(wide_int_range_bit_ior): New.
(wide_int_range_bit_and): New.
(wide_int_range_trunc_mod): New.
(extract_range_into_wide_ints): New.
(vrp_shift_undefined_p): New.
(extract_range_from_multiplicative_op): New.
(vrp_can_optimize_bit_op): New.
* tree-vrp.h (value_range::dump): New.
(wide_int_range_multiplicative_op): New.
(wide_int_range_lshift):New.
(wide_int_range_shift_undefined_p): New.
(wide_int_range_bit_xor): New.
(wide_int_range_bit_ior): New.
(wide_int_range_bit_and): New.
(wide_int_range_trunc_mod): New.
(zero_nonzero_bits_from_bounds): Rename to...
(wide_int_set_zero_nonzero_bits): ...this.
(zero_nonzero_bits_from_vr): Rename to...
(vrp_set_zero_nonzero_bits): ...this.
(range_easy_mask_min_max): Rename to...
(wide_int_range_can_optimize_bit_op): this.

From-SVN: r263218

[04/11] Add a vect_orig_stmt helper function

This patch just adds a helper function for going from a potential
pattern statement to the original scalar statement.

2018-08-01  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* tree-vectorizer.h (vect_orig_stmt): New function.
* tree-vect-data-refs.c (vect_preserves_scalar_order_p): Use it.
* tree-vect-loop.c (vect_model_reduction_cost): Likewise.
(vect_create_epilog_for_reduction): Likewise.
(vectorizable_live_operation): Likewise.
* tree-vect-slp.c (vect_find_last_scalar_stmt_in_slp): Likewise.
(vect_detect_hybrid_slp_stmts, vect_schedule_slp): Likewise.
* tree-vect-stmts.c (vectorizable_call): Likewise.
(vectorizable_simd_clone_call, vect_remove_stores): Likewise.

From-SVN: r263217

[03/11] Remove vect_transform_stmt grouped_store argument

Nothing now uses the grouped_store value passed back by
vect_transform_stmt, so we might as well remove it.

2018-08-01  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* tree-vectorizer.h (vect_transform_stmt): Remove grouped_store
argument.
* tree-vect-stmts.c (vect_transform_stmt): Likewise.
* tree-vect-loop.c (vect_transform_loop_stmt): Update call accordingly.
(vect_transform_loop): Likewise.
* tree-vect-slp.c (vect_schedule_slp_instance): Likewise.

From-SVN: r263216

[02/11] Remove vect_schedule_slp return value

Nothing now uses the vect_schedule_slp return value, so it's not worth
propagating the value through vect_schedule_slp_instance.

2018-08-01  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* tree-vectorizer.h (vect_schedule_slp): Return void.
* tree-vect-slp.c (vect_schedule_slp_instance): Likewise.
(vect_schedule_slp): Likewise.

From-SVN: r263215

[01/11] Schedule SLP earlier

vect_transform_loop used to call vect_schedule_slp lazily when it
came across the first SLP statement, but it seems easier to do it
before the main loop.

2018-07-30  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* tree-vect-loop.c (vect_transform_loop_stmt): Remove slp_scheduled
argument.
(vect_transform_loop): Update calls accordingly.  Schedule SLP
instances before the main loop, if any exist.

From-SVN: r263214

Fix over-widening handling of COND_EXPRs (PR 86749)

This PR is a wrong-code bug caused by the over-widening support.
The minimum input precisions for a COND_EXPR are supposed to apply
only to the "then" and "else" values, but here we were applying
them to the operands of a nested COND_EXPR comparison instead.

2018-08-01  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
PR tree-optimization/86749
* tree-vect-patterns.c (vect_determine_min_output_precision_1):
If the lhs is used in a COND_EXPR, check that it is being used
as the "then" or "else" value.

gcc/testsuite/
PR tree-optimization/86749
* gcc.dg/vect/pr86749.c: New test.

From-SVN: r263213

[PATCH] Remove use of 'struct map' from plugin (nvptx)

libgomp/
* plugin/plugin-nvptx.c (struct map): Removed.
(map_init, map_pop): Remove use of struct map. (map_push):
Likewise and change argument list.
* testsuite/libgomp.oacc-c-c++-common/mapping-1.c: New

Co-Authored-By: James Norris <jnorris@codesourcery.com>
From-SVN: r263212

PR libstdc++/60555 std::system_category() should recognise POSIX errno values

PR libstdc++/60555
* src/c++11/system_error.cc
(system_error_category::default_error_condition): New override to
check for POSIX errno values.
* testsuite/19_diagnostics/error_category/generic_category.cc: New
* testsuite/19_diagnostics/error_category/system_category.cc: New
test.

From-SVN: r263210

[nvptx] Define TARGET_HAVE_SPECULATION_SAFE_VALUE

2018-08-01  Tom de Vries  <tdevries@suse.de>

PR target/86800
* config/nvptx/nvptx.c (TARGET_HAVE_SPECULATION_SAFE_VALUE): Define to
speculation_safe_value_not_needed.

From-SVN: r263209

[libgomp, nvptx] Add cuda-lib.def

2018-08-01  Tom de Vries  <tdevries@suse.de>

* plugin/cuda-lib.def: New file.  Factor out of ...
* plugin/plugin-nvptx.c (CUDA_CALLS): ... here.
(struct cuda_lib_s, init_cuda_lib): Include cuda-lib.def instead of
using CUDA_CALLS.

From-SVN: r263208

re PR c++/86661 (g++ ICE:tree check: expected tree that contains ‘decl minimal’ structure, have ‘overload’ in note_name_declared_in_class, at cp/class.c:8288)

/cp
2018-08-01  Paolo Carlini  <paolo.carlini@oracle.com>

PR c++/86661
* class.c (note_name_declared_in_class): Use location_of in permerror
instead of DECL_SOURCE_LOCATION (for OVERLOADs).

/testsuite
2018-08-01  Paolo Carlini  <paolo.carlini@oracle.com>

PR c++/86661
* g++.dg/lookup/name-clash12.C: New.

From-SVN: r263207

tree-ssa-sccvn.c (visit_phi): Compare invariant addresses as base and offset.

2018-08-01  Richard Biener  <rguenther@suse.de>

* tree-ssa-sccvn.c (visit_phi): Compare invariant addresses
as base and offset.

* gcc.dg/tree-ssa/ssa-fre-68.c: New testcase.

From-SVN: r263206

poly-int-07_plugin.c (dg-options): Use -O0.

* gcc.dg/plugin/poly-int-07_plugin.c (dg-options): Use -O0.

From-SVN: r263205

pr84512.c: Xfail on alpha*-*-*.

* gcc.dg/tree-ssa/pr84512.c: Xfail on alpha*-*-*.

From-SVN: r263204

Improve dumping of value profiling transformations.

2018-08-01  Martin Liska  <mliska@suse.cz>

* value-prof.c (gimple_divmod_fixed_value_transform): Unify
        format how successful transformation is dumped.
(gimple_mod_pow2_value_transform): Likewise.
(gimple_mod_subtract_transform): Likewise.
(gimple_stringops_transform): Likewise.
2018-08-01  Martin Liska  <mliska@suse.cz>

* gcc.dg/tree-prof/stringop-1.c: Adjust scanned pattern.
* gcc.dg/tree-prof/stringop-2.c: Likewise.
* gcc.dg/tree-prof/val-prof-1.c: Likewise.
* gcc.dg/tree-prof/val-prof-2.c: Likewise.
* gcc.dg/tree-prof/val-prof-3.c: Likewise.
* gcc.dg/tree-prof/val-prof-4.c: Likewise.
* gcc.dg/tree-prof/val-prof-5.c: Likewise.
* gcc.dg/tree-prof/val-prof-7.c: Likewise.

From-SVN: r263203

__gcov_indirect_call_callee can't be null in __gcov_indirect_call_profiler_v2.

2018-08-01  Martin Liska  <mliska@suse.cz>

* libgcov-profiler.c (__gcov_indirect_call_profiler_v2): Do not
        check that  __gcov_indirect_call_callee is non-null.

From-SVN: r263202

Add memmove to value profiling.

2018-08-01  Martin Liska  <mliska@suse.cz>

        PR value-prof/35543
* value-prof.c (interesting_stringop_to_profile_p):
        Simplify the code and add BUILT_IN_MEMMOVE.
(gimple_stringops_transform): Likewise.
2018-08-01  Martin Liska  <mliska@suse.cz>

        PR value-prof/35543
* gcc.dg/tree-prof/val-prof-7.c: Add __builtin_memmove.

From-SVN: r263201

[PATCH][AArch64] Stop redundant zero-extension after UMOV when in DI mode

This patch extends the aarch64_get_lane_zero_extendsi instruction
definition to also cover DI mode. This prevents a redundant AND
instruction from being generated due to the pattern failing to be matched.

Committed on behalf of Sam Tebbs.

gcc/
2018-08-01  Sam Tebbs  <sam.tebbs@arm.com>

* config/aarch64/aarch64-simd.md
(*aarch64_get_lane_zero_extendsi<mode>): Rename to...
(*aarch64_get_lane_zero_extend<GPI:mode><VDQQH:mode>): ... This and
use GPI iterator instead of SI mode.

gcc/testsuite
2018-08-01  Sam Tebbs  <sam.tebbs@arm.com>

* gcc.target/aarch64/extract_zero_extend.c: New file.

From-SVN: r263200

re PR c/85704 (cc1 run out of memory when it compile)

PR c/85704
* c-typeck.c (init_field_decl_cmp): New function.
(output_pending_init_elements): Use it for field comparisons
instead of pure bit_position comparisons.

* gcc.c-torture/compile/pr85704.c: New test.

From-SVN: r263198

rs6000 - add speculation_barrier pattern

This patch reworks the existing rs6000_speculation_barrier pattern to
work with the new __builtin_sepculation_safe_value() intrinsic.  The
change is trivial as it simply requires renaming the existing speculation
barrier pattern.

So the total patch is to delete 14 characters!

* config/rs6000/rs6000.md (speculation_barrier): Renamed from
rs6000_speculation_barrier.
* config/rs6000/rs6000.c (rs6000_expand_builtin): Adjust for
new barrier pattern name.

From-SVN: r263197

x86 - add speculation_barrier pattern

This patch adds a speculation barrier for x86, based on my
understanding of the required mitigation for that CPU, which is to use
an lfence instruction.

This patch needs some review by an x86 expert and if adjustments are
needed, I'd appreciate it if they could be picked up by the port
maintainer.  This is supposed to serve as an example of how to deploy
the new __builtin_speculation_safe_value() intrinsic on this
architecture.

* config/i386/i386.md (unspecv): Add UNSPECV_SPECULATION_BARRIER.
(speculation_barrier): New insn.

From-SVN: r263196

re PR tree-optimization/86724 (Compilation error with new isl 0.20 (missing includes))

2018-08-01  Richard Biener  <rguenther@suse.de>

PR bootstrap/86724
* graphite.h: Include isl/id.h and isl/space.h to allow build
with ISL 0.20.

From-SVN: r263193

re PR target/86651 (lto-wrapper.exe: fatal error: simple_object_copy_lto_debug_sections not implemented: Invalid argument)

2018-08-01 Jan Willem Jagersma  <jwjagersma@gmail.com>

PR target/86651
* dwarf2out.c (dwarf2out_early_finish): Do not generate assembly in LTO
mode for COFF targets.
* defaults.h (TARGET_COFF): Define.
* config/i386/djgpp.h (TARGET_ASM_LTO_START, TARGET_ASM_LTO_END,
TARGET_COFF): Define.
(i386_djgpp_asm_lto_start, i386_djgpp_asm_lto_end): Declare.
* config/i386/djgpp.c (saved_debug_info_level): New static variable.
(i386_djgpp_asm_lto_start, i386_djgpp_asm_lto_end): New functions.

From-SVN: r263191

Daily bump.

From-SVN: r263190

runtime: use poll rather than pollset for netpoll on AIX

    Updates golang/go#26634

    Reviewed-on: https://go-review.googlesource.com/126857

From-SVN: r263186

PR libstdc++/86751 default assignment operators for std::pair

The solution for PR 77537 causes ambiguities due to the extra copy
assignment operator taking a __nonesuch_no_braces parameter. By making
the base class non-assignable we don't need the extra deleted overload
in std::pair. The copy assignment operator will be implicitly deleted
(and the move assignment operator not declared) as needed. Without the
additional user-provided operator in std::pair the ambiguity is avoided.

PR libstdc++/86751
* include/bits/stl_pair.h (__pair_base): New class with deleted copy
assignment operator.
(pair): Derive from __pair_base.
(pair::operator=): Remove deleted overload.
* python/libstdcxx/v6/printers.py (StdPairPrinter): New pretty printer
so that new base class isn't shown in GDB.
* testsuite/20_util/pair/86751.cc: New test.
* testsuite/20_util/pair/ref_assign.cc: New test.

From-SVN: r263185

Don't unconditionally define feature test macros in <version>

The macro definitions in <version> should depend on the same
preprocessor conditions as the original macros in other headers.
Otherwise <version> can define macros that imply the availability of
features that are not actually defined.

This fix is incomplete, as __cpp_lib_filesystem should depend on whether
libstdc++fs.a is supported, and several macros should only be defined
when _GLIBCXX_HOSTED is defined. Also, the feature test macros should
define their value as type long, but most are type int.

* include/bits/c++config (_GLIBCXX_HAVE_BUILTIN_HAS_UNIQ_OBJ_REP)
(_GLIBCXX_HAVE_BUILTIN_IS_AGGREGATE): Move definitions here.
(_GLIBCXX_HAVE_BUILTIN_LAUNDER): Likewise. Use !__is_identifier
instead of __has_builtin.
* include/std/type_traits (_GLIBCXX_HAVE_BUILTIN_HAS_UNIQ_OBJ_REP)
(_GLIBCXX_HAVE_BUILTIN_IS_AGGREGATE): Remove definitions from here.
* include/std/version [!_GLIBCXX_HAS_GTHREADS]
(__cpp_lib_shared_timed_mutex, __cpp_lib_scoped_lock)
(__cpp_lib_shared_mutex): Don't define when Gthreads not in use.
[!_GLIBCXX_HAVE_BUILTIN_HAS_UNIQ_OBJ_REP]
(__cpp_lib_has_unique_object_representations): Don't define when
builtin not available.
[!_GLIBCXX_HAVE_BUILTIN_IS_AGGREGATE] (__cpp_lib_is_aggregate):
Likewise.
[!_GLIBCXX_HAVE_BUILTIN_LAUNDER] (__cpp_lib_launder): Likewise.
* libsupc++/new (_GLIBCXX_HAVE_BUILTIN_LAUNDER): Remove definition
from here.

From-SVN: r263184

Save discriminator info for LTO

for  gcc/ChangeLog

* gimple-streamer-in.c (input_bb): Restore BB discriminator.
* gimple-streamer-out.c (output_bb): Save it.
* lto-streamer-in.c (input_struct_function_base): Restore
instance discriminator if available.  Create map on demand.
* lto-streamer-out.c (output_struct_function_base): Save it if
available.
* final.c (decl_to_instance_map): Document LTO strategy.

From-SVN: r263183

Introduce instance discriminators

With -gnateS, the Ada compiler sets itself up to output discriminators
for different instantiations of generics, but the middle and back ends
have lacked support for that.  This patch introduces the missing bits,
translating the GNAT-internal representation of the per-file instance
map to an instance_table that maps decls to instance discriminators.

From: Alexandre Oliva  <oliva@adacore.com>, Olivier Hainque  <hainque@adacore.com>
for  gcc/ChangeLog

* debug.h (decl_to_instance_map_t): New type.
(decl_to_instance_map): Declare.
(maybe_create_decl_to_instance_map): New inline function.
     * final.c (bb_discriminator, last_bb_discriminator): New statics,
     to track basic block discriminators.
     (final_start_function_1): Initialize them.
     (final_scan_insn_1): On NOTE_INSN_BASIC_BLOCK, track
bb_discriminator.
(decl_to_instance_map): New variable.
(map_decl_to_instance, maybe_set_discriminator): New functions.
     (notice_source_line): Set discriminator.

for  gcc/ada/ChangeLog

* trans.c: Include debug.h.
(file_map): New static variable.
(gigi): Set it.  Create decl_to_instance_map when needed.
(Subprogram_Body_to_gnu): Pass gnu_subprog_decl to...
(Sloc_to_locus): ... this.  Add decl parm, map it to instance.
* gigi.h (Sloc_to_locus): Adjust declaration.

for  gcc/testsuite/ChangeLog

* gnat.dg/dinst.adb: New.
* gnat.dg/dinst_pkg.ads, gnat.dg/dinst_pkg.adb: New.

Co-Authored-By: Olivier Hainque <hainque@adacore.com>
From-SVN: r263182

c-family: clean up the data tables in c-format.c

The format_char_info tables in c-format.c for our own formats contain
a lot of repetition.

This patch adds a macro to express the conversion specifiers implemented
within pp_format, making it clearer which are custom ones added by the
various diagnostic_format_decoder callbacks.

Doing so uncovered a few mistakes in the data (based on comparison with
the source of the diagnostic_format_decoder callbacks, and the notes
below), which the patch fixes:

- gcc_diag_char_table didn't have 'Z', but it *is* implemented by pp_format.

- removed erroneous 'G' and 'K' entries from gcc_diag_char_table: they're
  implemented by default_tree_printer (and thus in "tdiag") and by the
  C/C++ FEs, but not in pp_format.

- removed "v" (lower case) from gcc_tdiag_char_table and
  gcc_cxxdiag_char_table

Notes:

pretty-print.h uses this for ATTRIBUTE_GCC_PPDIAG, used by pp_printf
and pp_verbatim:

whereas diagnostic-core.h uses this for ATTRIBUTE_GCC_DIAG, used by
the various diagnostic functions:

/* If we haven't already defined a front-end-specific diagnostics
   style, use the generic one.  */

Hence I'm assuming that __gcc_diag__ is for use for when we don't
know what kind of diagnostic_format_decoder we have, and we can
only rely on pp_format's core functionality, where __gcc_tdiag__
is allowed to assume default_tree_printer.

gcc/c-family/ChangeLog:
* c-format.c (PP_FORMAT_CHAR_TABLE): New macro, based on existing
table entries for gcc_diag_char_table, and the 'Z' entry from
gcc_tdiag_char_table, changing the "chain" entry for 'Z' from
&gcc_tdiag_char_table[0] to &gcc_diag_char_table[0].
(gcc_diag_char_table): Use PP_FORMAT_CHAR_TABLE, implicitly
adding missing "Z" for this table.  Remove erroneous "G" and "K"
entries.
(gcc_tdiag_char_table): Use PP_FORMAT_CHAR_TABLE.  Remove "v".
(gcc_cdiag_char_table): Use PP_FORMAT_CHAR_TABLE.
(gcc_cxxdiag_char_table): Use PP_FORMAT_CHAR_TABLE.  Remove "v".

gcc/testsuite/ChangeLog:
* gcc.dg/format/gcc_diag-1.c (foo): Update the %v tests for
tdiag and cxxdiag.
* gcc.dg/format/gcc_diag-10.c (test_diag): Update tests of %G
and %K.

From-SVN: r263181

targhooks.c (default_have_speculation_safe_value): Add ATTRIBUTE_UNUSED.

* targhooks.c (default_have_speculation_safe_value): Add
ATTRIBUTE_UNUSED.

From-SVN: r263180

dumpfile.c: eliminate special-casing of dump_file/alt_dump_file

With the addition of optinfo, the various dump_* calls had three parts:
- optionally print to dump_file
- optionally print to alt_dump_file
- optionally make an optinfo_item and add it to the pending optinfo,
  creating it for dump_*_loc calls.

However, this split makes it difficult to implement the formatted dumps
later in patch kit, so as enabling work towards that, this patch removes
the above split, so that all dumping within the dump_* API goes through
optinfo_item.

In order to ensure that the dumps to dump_file and alt_dump_file are
processed immediately (rather than being buffered within the pending
optinfo for consolidation), this patch introduces the idea of "immediate"
optinfo_item destinations vs "non-immediate" destinations.

The patch also adds selftest coverage of what's printed, and of scopes.

This adds two allocations per dump_* call when dumping is enabled.
I'm assuming that this isn't a problem, as dump_enabled_p is normally
false.  There are ways of optimizing it if it is an issue (by making
optinfo_item instances become temporaries that borrow the underlying
buffer), but they require nontrivial changes, so I'd prefer to leave
that for another patch kit, if it becomes necessary.

gcc/ChangeLog:
* dump-context.h: Include "pretty-print.h".
(dump_context::refresh_dumps_are_enabled): New decl.
(dump_context::emit_item): New decl.
(class dump_context): Add fields "m_test_pp" and
"m_test_pp_flags".
(temp_dump_context::temp_dump_context): Add param "test_pp_flags".
(temp_dump_context::get_dumped_text): New decl.
(class temp_dump_context): Add field "m_pp".
* dumpfile.c (refresh_dumps_are_enabled): Convert to...
(dump_context::refresh_dumps_are_enabled): ...and add a test for
m_test_pp.
(set_dump_file): Update for above change.
(set_alt_dump_file): Likewise.
(dump_loc): New overload, taking a pretty_printer *.
(dump_context::dump_loc): Call end_any_optinfo.  Dump the location
to any test pretty-printer.
(make_item_for_dump_gimple_stmt): New function, adapted from
optinfo::add_gimple_stmt.
(dump_context::dump_gimple_stmt): Call it, and use the result,
eliminating the direct usage of dump_file and alt_dump_file in
favor of indirectly using them via emit_item.
(make_item_for_dump_gimple_expr): New function, adapted from
optinfo::add_gimple_expr.
(dump_context::dump_gimple_expr): Call it, and use the result,
eliminating the direct usage of dump_file and alt_dump_file in
favor of indirectly using them via emit_item.
(make_item_for_dump_generic_expr): New function, adapted from
optinfo::add_tree.
(dump_context::dump_generic_expr): Call it, and use the result,
eliminating the direct usage of dump_file and alt_dump_file in
favor of indirectly using them via emit_item.
(make_item_for_dump_printf_va): New function, adapted from
optinfo::add_printf_va.
(make_item_for_dump_printf): New function.
(dump_context::dump_printf_va): Call make_item_for_dump_printf_va,
and use the result, eliminating the direct usage of dump_file and
alt_dump_file in favor of indirectly using them via emit_item.
(make_item_for_dump_dec): New function.
(dump_context::dump_dec): Call it, and use the result,
eliminating the direct usage of dump_file and alt_dump_file in
favor of indirectly using them via emit_item.
(make_item_for_dump_symtab_node): New function, adapted from
optinfo::add_symtab_node.
(dump_context::dump_symtab_node): Call it, and use the result,
eliminating the direct usage of dump_file and alt_dump_file in
favor of indirectly using them via emit_item.
(dump_context::begin_scope): Reimplement, avoiding direct usage
of dump_file and alt_dump_file in favor of indirectly using them
via emit_item.
(dump_context::emit_item): New member function.
(temp_dump_context::temp_dump_context): Add param "test_pp_flags".
Set up test pretty-printer on the underlying context.  Call
refresh_dumps_are_enabled.
(temp_dump_context::~temp_dump_context): Call
refresh_dumps_are_enabled.
(temp_dump_context::get_dumped_text): New member function.
(selftest::verify_dumped_text): New function.
(ASSERT_DUMPED_TEXT_EQ): New macro.
(selftest::test_capture_of_dump_calls): Run all tests twice, with
and then without optinfo enabled.  Add uses of
ASSERT_DUMPED_TEXT_EQ to all tests.  Add test of nested scopes.
* dumpfile.h: Update comment for the dump_* API.
* optinfo-emit-json.cc
(selftest::test_building_json_from_dump_calls): Update for new
param for temp_dump_context ctor.
* optinfo.cc (optinfo_item::optinfo_item): Remove "owned" param
and "m_owned" field.
(optinfo_item::~optinfo_item): Likewise.
(optinfo::add_item): New member function.
(optinfo::emit): Update comment.
(optinfo::add_string): Delete.
(optinfo::add_printf): Delete.
(optinfo::add_printf_va): Delete.
(optinfo::add_gimple_stmt): Delete.
(optinfo::add_gimple_expr): Delete.
(optinfo::add_tree): Delete.
(optinfo::add_symtab_node): Delete.
(optinfo::add_dec): Delete.
* optinfo.h (class dump_context): New forward decl.
(optinfo::add_item): New decl.
(optinfo::add_string): Delete.
(optinfo::add_printf): Delete.
(optinfo::add_printf_va): Delete.
(optinfo::add_gimple_stmt): Delete.
(optinfo::add_gimple_expr): Delete.
(optinfo::add_tree): Delete.
(optinfo::add_symtab_node): Delete.
(optinfo::add_dec): Delete.
(optinfo::add_poly_int): Delete.
(optinfo_item::optinfo_item): Remove "owned" param.
(class optinfo_item): Remove field "m_owned".

From-SVN: r263178

re PR middle-end/86705 (pr45678-2.c ICE with msp430-elf -mlarge)

PR middle-end/86705

* gcc/cfgexpand.c (set_parm_rtl): Use the alignment of Pmode when
MAX_SUPPORTED_STACK_ALIGNMENT would otherwise be exceeded by the
requested variable alignment.
(expand_one_ssa_partition): Likewise.
(expand_one_var): Likewise.

From-SVN: r263177

pdp11 - example of a port not needing a speculation barrier

This patch is intended as an example of all that is needed if the
target system doesn't support CPUs that have speculative execution.
I've chosen the pdp11 port on the basis that it's old enough that this
is likely to be true for all existing implementations and that there
is also little chance of that changing in future!

* config/pdp11/pdp11.c (TARGET_HAVE_SPECULATION_SAFE_VALUE): Redefine
to speculation_safe_value_not_needed.

From-SVN: r263176

targhooks - provide an alternative hook for targets that never execute speculatively

This hook adds an alternative implementation for the target hook
TARGET_HAVE_SPECULATION_SAFE_VALUE; it can be used by targets that have no
CPU implementations that execute code speculatively.  All that is needed for
such targets now is to add:

 #undef TARGET_HAVE_SPECULATION_SAFE_VALUE
 #define TARGET_HAVE_SPECULATION_SAFE_VALUE speculation_safe_value_not_needed.

to where you have your other target hooks and you're done.

gcc:
* targhooks.h (speculation_safe_value_not_needed): New prototype.
* targhooks.c (speculation_safe_value_not_needed): New function.
* target.def (have_speculation_safe_value): Update documentation.
* doc/tm.texi: Regenerated.

From-SVN: r263175

AArch64 - use CSDB based sequences if speculation tracking is enabled

In this final patch, now that we can track speculation through conditional
branches, we can use this information to use a less expensive CSDB based
speculation barrier.

* config/aarch64/iterators.md (ALLI_TI): New iterator.
* config/aarch64/aarch64.md (despeculate_copy<ALLI_TI:mode>): New
expand.
(despeculate_copy<ALLI:mode>_insn): New insn.
(despeculate_copyti_insn): New insn.
(despeculate_simple<ALLI:mode>): New insn
(despeculate_simpleti): New insn.
* config/aarch64/aarch64.c (aarch64_speculation_safe_value): New
function.
(TARGET_SPECULATION_SAFE_VALUE): Redefine to
aarch64_speculation_safe_value.
(aarch64_print_operand): Handle const0_rtx in modifier 'H'.

From-SVN: r263174

AArch64 - new pass to add conditional-branch speculation tracking

This patch is the main part of the speculation tracking code.  It adds
a new target-specific pass that is run just before the final branch
reorg pass (so that it can clean up any new edge insertions we make).
The pass is only run with -mtrack-speculation is passed on the command
line.

One thing that did come to light as part of this was that the stack pointer
register was not being permitted in comparision instructions.  We rely on
that for moving the tracking state between SP and the scratch register at
function call boundaries.

* config/aarch64/aarch64-speculation.cc: New file.
* config/aarch64/aarch64-passes.def (pass_track_speculation): Add before
pass_reorder_blocks.
* config/aarch64/aarch64-protos.h (make_pass_track_speculation): Add
prototype.
* config/aarch64/aarch64.c (aarch64_conditional_register_usage): Fix
X14 and X15 when tracking speculation.
* config/aarch64/aarch64.md (register name constants): Add
SPECULATION_TRACKER_REGNUM and SPECULATION_SCRATCH_REGNUM.
(unspec): Add UNSPEC_SPECULATION_TRACKER.
(speculation_barrier): New insn attribute.
(cmp<mode>): Allow SP in comparisons.
(speculation_tracker): New insn.
(speculation_barrier): Add speculation_barrier attribute.
* config/aarch64/t-aarch64: Add make rule for aarch64-speculation.o.
* config.gcc (aarch64*-*-*): Add aarch64-speculation.o to extra_objs.
* doc/invoke.texi (AArch64 Options): Document -mtrack-speculation.

From-SVN: r263173

AArch64 - disable CB[N]Z TB[N]Z when tracking speculation

The CB[N]Z and TB[N]Z instructions do not expose the comparison through
the condition code flags.  This makes it impossible to track speculative
execution through such a branch.  We can handle this relatively easily
by simply disabling the patterns in this case.

A side effect of this is that the split patterns for the atomic operations
need to also avoid generating these instructions.  They mostly have simple
fall-backs for this already.

* config/aarch64/aarch64.md (cb<optab><mode>1): Disable when
aarch64_track_speculation is true.
(tb<optab><mode>1): Likewise.
* config/aarch64/aarch64.c (aarch64_split_compare_regs): Do not
generate CB[N]Z when tracking speculation.
(aarch64_split_compare_and_swap): Likewise.
(aarch64_split_atomic_op): Likewise.

From-SVN: r263172

AArch64 - Add new option -mtrack-speculation

This patch doesn't do anything useful, it simply adds a new command-line
option -mtrack-speculation to AArch64.  Subsequent patches build on this.

* config/aarch64/aarch64.opt (mtrack-speculation): New target option.

From-SVN: r263171

AArch64 - add speculation barrier

Similar to Arm, this adds an unconditional speculation barrier for AArch64.

* config/aarch64.md (unspecv): Add UNSPECV_SPECULAION_BARRIER.
(speculation_barrier): New insn.

From-SVN: r263170

Arm - add speculation_barrier pattern

This patch defines a speculation barrier for AArch32.

* config/arm/unspecs.md (unspecv): Add VUNSPEC_SPECULATION_BARRIER.
* config/arm/arm.md (speculation_barrier): New expand.
(speculation_barrier_insn): New pattern.

From-SVN: r263169

Add __builtin_speculation_safe_value

This patch defines a new intrinsic function
__builtin_speculation_safe_value.  A generic default implementation is
defined which will attempt to use the backend pattern
"speculation_safe_barrier".  If this pattern is not defined, or if it
is not available, then the compiler will emit a warning, but
compilation will continue.

Note that the test spec-barrier-1.c will currently fail on all
targets.  This is deliberate, the failure will go away when
appropriate action is taken for each target backend.

gcc:
* builtin-types.def (BT_FN_PTR_PTR_VAR): New function type.
(BT_FN_I1_I1_VAR, BT_FN_I2_I2_VAR, BT_FN_I4_I4_VAR): Likewise.
(BT_FN_I8_I8_VAR, BT_FN_I16_I16_VAR): Likewise.
* builtin-attrs.def (ATTR_NOVOPS_NOTHROW_LEAF_LIST): New attribute
list.
* builtins.def (BUILT_IN_SPECULATION_SAFE_VALUE_N): New builtin.
(BUILT_IN_SPECULATION_SAFE_VALUE_PTR): New internal builtin.
(BUILT_IN_SPECULATION_SAFE_VALUE_1): Likewise.
(BUILT_IN_SPECULATION_SAFE_VALUE_2): Likewise.
(BUILT_IN_SPECULATION_SAFE_VALUE_4): Likewise.
(BUILT_IN_SPECULATION_SAFE_VALUE_8): Likewise.
(BUILT_IN_SPECULATION_SAFE_VALUE_16): Likewise.
* builtins.c (expand_speculation_safe_value): New function.
(expand_builtin): Call it.
* doc/cpp.texi: Document predefine __HAVE_SPECULATION_SAFE_VALUE.
* doc/extend.texi: Document __builtin_speculation_safe_value.
* doc/md.texi: Document "speculation_barrier" pattern.
* doc/tm.texi.in: Pull in TARGET_SPECULATION_SAFE_VALUE and
TARGET_HAVE_SPECULATION_SAFE_VALUE.
* doc/tm.texi: Regenerated.
* target.def (have_speculation_safe_value, speculation_safe_value): New
hooks.
* targhooks.c (default_have_speculation_safe_value): New function.
(default_speculation_safe_value): New function.
* targhooks.h (default_have_speculation_safe_value): Add prototype.
(default_speculation_safe_value): Add prototype.

c-family:
* c-common.c (speculation_safe_resolve_call): New function.
(speculation_safe_resolve_params): New function.
(speculation_safe_resolve_return): New function.
(resolve_overloaded_builtin): Handle __builtin_speculation_safe_value.
* c-cppbuiltin.c (c_cpp_builtins): Add pre-define for
__HAVE_SPECULATION_SAFE_VALUE.

testsuite:
* c-c++-common/spec-barrier-1.c: New test.
* c-c++-common/spec-barrier-2.c: New test.
* gcc.dg/spec-barrier-3.c: New test.

From-SVN: r263168

Simplify dump_context by adding a dump_loc member function

This patch removes some duplicated code in dumpfile.c by
reimplementing the various dump_foo_loc calls in terms of dump_foo.

gcc/ChangeLog:
* dump-context.h (dump_context::dump_loc): New decl.
* dumpfile.c (dump_context::dump_loc): New member function.
(dump_context::dump_gimple_stmt_loc): Reimplement using dump_loc
and dump_gimple_stmt.
(dump_context::dump_gimple_expr_loc): Likewise, using
dump_gimple_expr.
(dump_context::dump_generic_expr_loc): Likewise, using
dump_generic_expr.
(dump_context::dump_printf_loc_va): Likewise, using
dump_printf_va.
(dump_context::begin_scope): Explicitly using the global function
"dump_loc", rather than the member function.

From-SVN: r263167

PR tree-optimization/86741 - ICE in -Warray-bounds indexing into an object of incomplete type

gcc/ChangeLog:

PR tree-optimization/86741
* tree-vrp.c (vrp_prop::check_mem_ref): Avoid incomplete types.

gcc/testsuite/ChangeLog:

PR tree-optimization/86741
* gcc.dg/Warray-bounds-33.c: New test.

From-SVN: r263166

S/390: Don't emit prefetch instructions for clrmem

gcc/ChangeLog:

2018-07-31  Andreas Krebbel  <krebbel@linux.ibm.com>

* config/s390/s390.c (s390_expand_setmem): Make the unrolling to
depend on whether prefetch instructions will be emitted or not.
Use TARGET_SETMEM_PFD for checking whether prefetch instructions
will be emitted or not.
* config/s390/s390.h (TARGET_SETMEM_PREFETCH_DISTANCE)
(TARGET_SETMEM_PFD): New macros.

gcc/testsuite/ChangeLog:

2018-07-31  Andreas Krebbel  <krebbel@linux.ibm.com>

* gcc.target/s390/memset-1.c: Improve testcase.

From-SVN: r263165

[c++] Fix DECL_BY_REFERENCE of clone parms

Consider test.C compiled at -O0 -g:
...
class string {
public:
  string (const char *p) { this->p = p ; }
  string (const string &s) { this->p = s.p; }

private:
  const char *p;
};

class foo {
public:
  foo (string dir_hint) {}
};

int
main (void)
{
  std::string s = "This is just a string";
  foo bar(s);
  return 0;
}
...

When parsing foo::foo, the dir_hint parameter gets a DECL_ARG_TYPE of
'struct string & restrict'.  Then during finish_struct, we call
clone_constructors_and_destructors and create clones for foo::foo, and
set the DECL_ARG_TYPE in the same way.

Later on, during finish_function, cp_genericize is called for the original
foo::foo, which sets the type of parm dir_hint to DECL_ARG_TYPE, and sets
DECL_BY_REFERENCE of dir_hint to 1.

After that, during maybe_clone_body update_cloned_parm is called with:
...
(gdb) call debug_generic_expr (parm.typed.type)
struct string & restrict
(gdb) call debug_generic_expr (cloned_parm.typed.type)
struct string
...
The type of the cloned_parm is then set to the type of parm, but
DECL_BY_REFERENCE is not set.

When doing cp_genericize for the clone later on,
TREE_ADDRESSABLE (TREE_TYPE ()) is no longer true for the updated type for
the parm, so DECL_BY_REFERENCE is not set there either.

The missing DECL_BY_REFERENCE on cloned_parm causes incorrect debug info to be
generated.

This patch fixes the problem by copying DECL_BY_REFERENCE in update_cloned_parm.

Bootstrapped and reg-tested on x86_64.

2018-07-31  Tom de Vries  <tdevries@suse.de>

PR debug/86687
* optimize.c (update_cloned_parm): Copy DECL_BY_REFERENCE.

* g++.dg/guality/pr86687.C: New test.

From-SVN: r263164

Improve libstdc++ docs w.r.t newer C++ standards

Instead of repeating all the old headers for every new standard I've
changed the docs to only list the new headers for each standard.

* doc/xml/manual/test.xml: Improve documentation on writing tests for
newer standards.
* doc/xml/manual/using.xml: Document all headers for C++11 and later.
* doc/html/*: Regenerate.

From-SVN: r263163

Replace safe bool idiom with explicit operator bool

* include/ext/pointer.h [__cplusplus >= 201103L]
(_Pointer_adapter::operator bool): Add explicit conversion operator
to replace safe bool idiom.

From-SVN: r263162

[46/46] Turn stmt_vec_info back into a typedef

This patch removes the stmt_vec_info wrapper class added near the
beginning of the series and turns stmt_vec_info back into a typedef.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* tree-vectorizer.h (stmt_vec_info): Turn back into a typedef.
(NULL_STMT_VEC_INFO): Delete.
(stmt_vec_info::operator*): Likewise.
(stmt_vec_info::operator gimple *): Likewise.
* tree-vect-loop.c (vectorizable_reduction): Use NULL instead
of NULL_STMT_VEC_INFO.
* tree-vect-patterns.c (vect_init_pattern_stmt): Likewise.
(vect_reassociating_reduction_p): Likewise.
* tree-vect-stmts.c (vect_build_gather_load_calls): Likewise.
(vectorizable_store): Likewise.
* tree-vectorizer.c (vec_info::set_vinfo_for_stmt): Likewise.
(vec_info::free_stmt_vec_infos): Likewise.

From-SVN: r263161

[45/46] Remove vect_stmt_in_region_p

Unlike the old vinfo_for_stmt, vec_info::lookup_stmt can cope with
any statement, so there's no need to check beforehand that the statement
is part of the vectorisable region.  This means that there are no longer
any calls to vect_stmt_in_region_p.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* tree-vectorizer.h (vect_stmt_in_region_p): Delete.
* tree-vectorizer.c (vect_stmt_in_region_p): Likewise.

From-SVN: r263160

[44/46] Remove global vinfo_for_stmt-related routines

There are no more direct uses of:

- new_stmt_vec_info
- set_vinfo_for_stmt
- free_stmt_vec_infos
- free_stmt_vec_info

outside of vec_info, so they can now be private member functions.
It also seemed better to put them in tree-vectorizer.c, along with the
other vec_info routines.

We can also get rid of:

- vinfo_for_stmt
- stmt_vec_info_vec
- set_stmt_vec_info_vec

since nothing now uses them.  This was the main goal of the series.

2018-07-31  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* tree-vectorizer.h (vec_info::new_vinfo_for_stmt)
(vec_info::set_vinfo_for_stmt, vec_info::free_stmt_vec_infos)
(vec_info::free_stmt_vec_info): New private member functions.
(set_stmt_vec_info_vec, free_stmt_vec_infos, vinfo_for_stmt)
(set_vinfo_for_stmt, new_stmt_vec_info, free_stmt_vec_info): Delete.
* tree-parloops.c (gather_scalar_reductions): Remove calls to
set_stmt_vec_info_vec and free_stmt_vec_infos.
* tree-vect-loop.c (_loop_vec_info): Remove call to
set_stmt_vec_info_vec.
* tree-vect-stmts.c (new_stmt_vec_info, set_stmt_vec_info_vec)
(free_stmt_vec_infos, free_stmt_vec_info): Delete in favor of...
* tree-vectorizer.c (vec_info::new_stmt_vec_info)
(vec_info::set_vinfo_for_stmt, vec_info::free_stmt_vec_infos)
(vec_info::free_stmt_vec_info): ...these new functions.  Remove
assignments in {vec_info::,}new_stmt_vec_info that are redundant
with the clearing in the xcalloc.
(stmt_vec_info_vec): Delete.
(vec_info::vec_info): Don't call set_stmt_vec_info_vec.
(vectorize_loops): Likewise.
(vec_info::~vec_info): Remove argument from call to
free_stmt_vec_infos.
(vec_info::add_stmt): Remove vinfo argument from call to
new_stmt_vec_info.

From-SVN: r263159