Richard Sandiford [Tue, 21 Jan 2020 16:42:27 +0000 (16:42 +0000)]
Extend r279588 to g++.dg/ext/sve-sizeless-1.C
In r279588 I'd for some reason only patched g++.dg/ext/sve-sizeless-2.C,
even though g++.dg/ext/sve-sizeless-1.C has the same problem.
2020-01-22 Richard Sandiford <richard.sandiford@arm.com>
gcc/testsuite/
* g++.dg/ext/sve-sizeless-1.C: Don't expect an error for alias
templates.
Richard Biener [Wed, 22 Jan 2020 11:38:12 +0000 (12:38 +0100)]
tree-optimization/93381 fix integer offsetting in points-to analysis
We were incorrectly assuming a merge operation is conservative enough
for not explicitely handled operations but we also need to consider
offsetting within fields when field-sensitive analysis applies.
2020-01-22 Richard Biener <rguenther@suse.de>
PR tree-optimization/93381
* tree-ssa-structalias.c (find_func_aliases): Assume offsetting
throughout, handle all conversions the same.
* gcc.dg/torture/pr93381.c: New testcase.
Jakub Jelinek [Wed, 22 Jan 2020 11:28:16 +0000 (12:28 +0100)]
aarch64: Fix aarch64_expand_subvti constant handling [PR93335]
The two patterns that call aarch64_expand_subvti ensure that {low,high}_in1
is a register, while {low,high}_in2 can be a register or immediate.
subdi3_compare1_imm uses the aarch64_plus_immediate predicate for its last
two operands (the value and negated value), but aarch64_expand_subvti calls
it whenever low_in2 is a CONST_INT, which leads to ICEs during vregs pass,
as the emitted insn is not recognized as valid subdi3_compare1_imm.
The following patch fixes that by only using subdi3_compare1_imm if it is ok
to do so, and otherwise force the constant into register and use the
non-immediate version - subdi3_compare1.
Furthermore, previously the code was calling force_reg on high_in2 only if
low_in2 is CONST_INT, on the (reasonable) assumption is that only if low_in2
is a CONST_INT, high_in2 can be non-REG, but with the above changes even in
the else we might have CONST_INT and force_reg doesn't do anything if the
operand is already a REG, so this patch calls it unconditionally.
2020-01-22 Jakub Jelinek <jakub@redhat.com>
PR target/93335
* config/aarch64/aarch64.c (aarch64_expand_subvti): Only use
gen_subdi3_compare1_imm if low_in2 satisfies aarch64_plus_immediate
predicate, not whenever it is CONST_INT. Otherwise, force_reg it.
Call force_reg on high_in2 unconditionally.
* gcc.c-torture/compile/pr93335.c: New test.
Martin Liska [Wed, 22 Jan 2020 11:08:11 +0000 (12:08 +0100)]
Smart relaxation of TOP N counter.
PR tree-optimization/92924
* profile.c (compute_value_histograms): Divide
all counter values.
PR tree-optimization/92924
* libgcov-driver.c (prune_topn_counter): New.
(prune_counters): Likewise.
(dump_one_gcov): Prune a run-time counter.
* libgcov-profiler.c (__gcov_topn_values_profiler_body):
For a known value, add GCOV_TOPN_VALUES to value.
Otherwise, decrement all counters by one.
Richard Earnshaw [Wed, 22 Jan 2020 10:06:50 +0000 (10:06 +0000)]
contrib: script to create a new vendor branch
This script is intended to create a new vendor branch. Doing so is
not completely obvious if you are not familiar with the upstream
structure, so this takes the pain out of getting it right.
It doesn't check out the branch locally, but does set everything up so
that, if you have push enabled for your vendor branches, then
git push vendors/<vendor> <branch>
will work as expected.
Run the script as
contrib/git-add-vendor-branch.sh <vendor>/<branch> <start-point>
the <vendor> space must have previously been set up in the way
git-fetch-vendor.sh expects.
* git-add-vendor-branch.sh: New file.
Jakub Jelinek [Wed, 22 Jan 2020 09:22:16 +0000 (10:22 +0100)]
i386: Fix up -fdollars-in-identifiers with identifiers starting with $ in -masm=att [PR91298]
In AT&T syntax leading $ is special, so if we have identifiers that start
with dollar, we usually fail to assemble it (or assemble incorrectly).
As mentioned in the PR, what works is wrapping the identifiers inside of
parens, like:
movl $($a), %eax
leaq ($a)(,%rdi,4), %rax
movl ($a)(%rip), %eax
movl ($a)+16(%rip), %eax
.globl $a
.type $a, @object
.size $a, 72
$a:
.string "$a"
.quad ($a)
(this is x86_64 -fno-pic -O2). In some places ($a) is not accepted,
like as .globl operand, in .type, .size, so the patch overrides
ASM_OUTPUT_SYMBOL_REF rather than e.g. ASM_OUTPUT_LABELREF.
I didn't want to duplicate what assemble_name is doing (following
transparent aliases), so split assemble_name into two parts; just
mere looking at the first character of a name before calling assemble_name
wouldn't be good enough, a transparent alias could lead from a name
not starting with $ to one starting with it and vice versa.
2020-01-22 Jakub Jelinek <jakub@redhat.com>
PR target/91298
* output.h (assemble_name_resolve): Declare.
* varasm.c (assemble_name_resolve): New function.
(assemble_name): Use it.
* config/i386/i386.h (ASM_OUTPUT_SYMBOL_REF): Define.
* gcc.target/i386/pr91298-1.c: New test.
* gcc.target/i386/pr91298-2.c: New test.
Jakub Jelinek [Wed, 22 Jan 2020 08:54:59 +0000 (09:54 +0100)]
openmp: Fix up !$omp target parallel handling
The PR93329 fix revealed we ICE on !$omp target parallel, this change fixes
that.
2020-01-22 Jakub Jelinek <jakub@redhat.com>
* parse.c (parse_omp_structured_block): Handle ST_OMP_TARGET_PARALLEL.
* trans-openmp.c (gfc_trans_omp_target)
<case EXEC_OMP_TARGET_PARALLEL>: Call pushlevel first.
* gfortran.dg/gomp/target-parallel1.f90: New test.
* gfortran.dg/goacc/pr93329.f90: Enable commented out target parallel
test.
Jakub Jelinek [Wed, 22 Jan 2020 08:50:53 +0000 (09:50 +0100)]
openmp: Teach omp_code_to_statement about rest of OpenMP statements
The omp_code_to_statement function added with the initial OpenACC support
only handled small subset of the OpenMP statements, leading to ICE if
any other OpenMP directive appeared inside of OpenACC directive.
2020-01-22 Jakub Jelinek <jakub@redhat.com>
PR fortran/93329
* openmp.c (omp_code_to_statement): Handle remaining EXEC_OMP_*
cases.
* gfortran.dg/goacc/pr93329.f90: New test.
Ian Lance Taylor [Thu, 2 Jan 2020 23:05:27 +0000 (15:05 -0800)]
libgo: update to Go1.14beta1
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/214297
JunMa [Tue, 21 Jan 2020 02:29:34 +0000 (10:29 +0800)]
Add error check on return value of build_co_await
gcc/cp/ChangeLog
* coroutines.cc (finish_co_await_expr): Add error check on return
value of build_co_await.
(finish_co_yield_expr): Ditto.
JunMa [Thu, 21 Nov 2019 00:51:22 +0000 (08:51 +0800)]
Add error messages for missing methods of awaitable class
gcc/cp/ChangeLog
* coroutines.cc (lookup_awaitable_member): Lookup an awaitable member.
(lookup_promise_method): Emit diagnostic when get NULL_TREE back only.
(build_co_await): Use lookup_awaitable_member instead of lookup_member.
gcc/testsuite/ChangeLog
* g++.dg/coroutines/coro1-missing-await-method.C: New test.
Joseph Myers [Wed, 22 Jan 2020 01:36:00 +0000 (01:36 +0000)]
Update update_web_docs_svn references in sourcebuild.texi.
These needed updating after the replacement of update_web_docs_svn by
update_web_docs_git.
* doc/sourcebuild.texi (Texinfo Manuals, Front End): Refer to
update_web_docs_git instead of update_web_docs_svn.
Andrew Pinski [Fri, 17 Jan 2020 06:54:53 +0000 (06:54 +0000)]
Fix target/93119 (aarch64): ICE with traditional TLS support on ILP32
The problem here was g:
23b88fda665d2f995c was not a complete fix
for supporting tranditional TLS on ILP32.
So the problem here is a couple of things, first __tls_get_addr
call will return a C pointer value so we need to use ptr_mode
when we are creating the call. Then we need to convert
back that register to the correct mode, either zero extending
it or just creating a move instruction.
Also symbol_ref can either be in SImode or DImode. So we need to
allow both modes.
Built and tested on aarch64-linux-gnu with no regressions.
Also built a full toolchain (including glibc) defaulting to traditional
TLS that targets ilp32 and lp64.
ChangeLog:
PR target/93119
* config/aarch64/aarch64.md (tlsgd_small_<mode>): Have operand 0
as PTR mode. Have operand 1 as being modeless, it can be P mode.
(*tlsgd_small_<mode>): Likewise.
* config/aarch64/aarch64.c (aarch64_load_symref_appropriately)
<case SYMBOL_SMALL_TLSGD>: Call gen_tlsgd_small_* with a ptr_mode
register. Convert that register back to dest using convert_mode.
Joseph Myers [Wed, 22 Jan 2020 01:23:42 +0000 (01:23 +0000)]
Fix ICE with cast of division by zero (PR c/93348).
Bug 93348 reports an ICE on certain cases of casts of expressions that
may appear only in unevaluated parts of integer constant expressions,
arising from the generation of nested C_MAYBE_CONST_EXPRs. This patch
fixes it by adding a call to remove_c_maybe_const_expr in the
integer-operands case, as is done in other similar cases.
Bootstrapped with no regressions for x86_64-pc-linux-gnu.
PR c/93348
gcc/c:
* c-typeck.c (build_c_cast): Call remove_c_maybe_const_expr on
argument with integer operands.
gcc/testsuite:
* gcc.c-torture/compile/pr93348-1.c: New test.
GCC Administrator [Wed, 22 Jan 2020 00:16:34 +0000 (00:16 +0000)]
Daily bump.
David Malcolm [Tue, 21 Jan 2020 17:42:36 +0000 (12:42 -0500)]
analyzer: fix qsort issue with array_region keys (PR 93352)
PR analyzer/93352 reports a qsort failure
"comparator not anti-symmetric: -
2147483648, -
2147483648)"
within the analyzer on code involving an array access of [0x7fffffff + 1].
The issue is that array_region (which uses int for keys into known
values in the array) uses subtraction to implement int_cmp for sorting
the keys, which isn't going to work for boundary values.
Potentially a wider type should be used, but for now this patch fixes
the ICE by using explicit comparisons rather than subtraction to
implement the qsort callback.
gcc/analyzer/ChangeLog:
PR analyzer/93352
* region-model.cc (int_cmp): Rename to...
(array_region::key_cmp): ...this, using key_t rather than int.
Rewrite in terms of comparisons rather than subtraction to
ensure qsort is anti-symmetric when handling extreme values.
(array_region::walk_for_canonicalization): Update for above
renaming.
* region-model.h (array_region::key_cmp): New decl.
gcc/testsuite/ChangeLog:
PR analyzer/93352
* gcc.dg/analyzer/pr93352.c: New test.
Jason Merrill [Tue, 7 Jan 2020 17:20:26 +0000 (12:20 -0500)]
PR c++/40752 - useless -Wconversion with short +=.
This is a longstanding issue with lots of duplicates; people are not
interested in a -Wconversion warning about mychar += 1. So now that warning
depends on -Warith-conversion; otherwise we only warn if operands of the
arithmetic have conversion issues.
* c.opt (-Warith-conversion): New.
* c-warn.c (conversion_warning): Recurse for operands of
operators. Only warn about the whole expression with
-Warith-conversion.
Jason Merrill [Fri, 10 Jan 2020 17:49:03 +0000 (12:49 -0500)]
Handle -Wsign-conversion in conversion_warning.
It seemed strange to me to warn about sign conversion in
unsafe_conversion_p, when other warnings are in conversion_warning, and the
latter function is the only place that asks the former function to warn.
This change is also necessary for my -Warith-conversion patch.
* c-common.c (unsafe_conversion_p): Don't warn, return UNSAFE_SIGN.
* c-warn.c (conversion_warning): Warn about UNSAFE_SIGN.
Jim Wilson [Tue, 21 Jan 2020 23:20:19 +0000 (15:20 -0800)]
RISC-V: Fix rtl checking enabled failure with -msave-restore.
Found with an rtl checking enabled build and check. This triggered failures
in the gcc.target/riscv/save-restore* tests. We are using XINT to access an
XWINT value; INTVAL is the preferred solution.
gcc/
* config/riscv/riscv-sr.c (riscv_sr_match_prologue): Use INTVAL
instead of XINT.
Hans-Peter Nilsson [Tue, 21 Jan 2020 23:09:14 +0000 (00:09 +0100)]
More uses of effective-target march_option for cris
* gcc.target/cris/asm-v8.S, gcc.target/cris/inasm-v8.c,
gcc.target/cris/sync-1.c: Apply effective_target_march_option.
Oops. A few stragglers, same as recent update: differing
-march=... options is an error, noticed with e.g.
"make check RUNTESTFLAGS=--target_board=cris-sim/arch=v10"
H.J. Lu [Tue, 21 Jan 2020 22:09:53 +0000 (14:09 -0800)]
i386: Do GNU2 TLS address computation in ptr_mode
Since GNU2 TLS address from glibc run-time is in ptr_mode, we should do
GNU2 TLS address computation in ptr_mode and zero-extend result to Pmode.
gcc/
PR target/93319
* config/i386/i386.c (ix86_tls_module_base): Replace Pmode
with ptr_mode.
(legitimize_tls_address): Do GNU2 TLS address computation in
ptr_mode and zero-extend result to Pmode.
* config/i386/i386.md (@tls_dynamic_gnu2_64_<mode>): Replace
:P with :PTR and Pmode with ptr_mode.
(*tls_dynamic_gnu2_lea_64_<mode>): Likewise.
(*tls_dynamic_gnu2_call_64_<mode>): Likewise.
(*tls_dynamic_gnu2_combine_64_<mode>): Likewise.
gcc/testsuite/
PR target/93319
* gcc.target/i386/pr93319-1a.c: Don't include <stdio.h>.
(test1): Replace printf with __builtin_printf.
Jason Merrill [Tue, 21 Jan 2020 19:21:49 +0000 (14:21 -0500)]
PR c++/60855 - ICE with sizeof VLA capture.
For normal captures we usually look through them within unevaluated context,
but that doesn't work here; trying to take the sizeof of the array in the
enclosing scope tries and fails to evaluate a SAVE_EXPR from the enclosing
scope.
* lambda.c (is_lambda_ignored_entity): Don't look past VLA capture.
Jason Merrill [Tue, 21 Jan 2020 18:22:35 +0000 (13:22 -0500)]
PR c++/90732 - ICE with VLA capture and generic lambda.
We were failing to handle VLA capture in tsubst_lambda_expr; initially
building a DECLTYPE_TYPE for the capture and then tsubsting it doesn't give
the special VLA handling. So with this patch we call add_capture again for
VLAs.
* pt.c (tsubst_lambda_expr): Repeat add_capture for VLAs.
Iain Sandoe [Tue, 21 Jan 2020 20:42:17 +0000 (20:42 +0000)]
[coro] Fix co_await of void type.
gcc/cp
2020-01-21 Iain Sandoe <iain@sandoe.co.uk>
Bin Cheng <bin.cheng@linux.alibaba.com>
* coroutines.cc (coro_promise_type_found_p): Check for NULL return
from complete_type_or_else.
(register_param_uses): Likewise.
(build_co_await): Do not try to use complete_type_or_else for void
types, otherwise for incomplete types, check for NULL return from
complete_type_or_else.
gcc/testsuite
2020-01-21 Bin Cheng <bin.linux@linux.alibaba.com>
* g++.dg/coroutines/co-await-void_type.C: New test.
Jakub Jelinek [Tue, 21 Jan 2020 20:43:03 +0000 (21:43 +0100)]
riscv: Fix up riscv_rtx_costs for RTL checking (PR target/93333)
As mentioned in the PR, during combine rtx_costs can be called sometimes
even on RTL that has not been validated yet and so can contain even operands
that aren't valid in any instruction.
2020-01-21 Jakub Jelinek <jakub@redhat.com>
PR target/93333
* config/riscv/riscv.c (riscv_rtx_costs) <case ZERO_EXTRACT>: Verify
the last two operands are CONST_INT_P before using them as such.
* gcc.c-torture/compile/pr93333.c: New test.
Sandra Loosemore [Tue, 21 Jan 2020 19:20:45 +0000 (11:20 -0800)]
Fix line terminator pattern in testcase.
I observed this testcase was failing on nios2-elf. The more general
regexp was copied from other tests using dg-output.
2020-01-21 Sandra Loosemore <sandra@codesourcery.com>
gcc/testsuite/
* g++.dg/coroutines/torture/mid-suspend-destruction-0.C: Generalize
line terminators in patterns.
Richard Sandiford [Sun, 10 Nov 2019 22:38:42 +0000 (22:38 +0000)]
aarch64: Use stdint types for SVE ACLE elements
I'd used mode-based element types in the SVE ACLE implementation, but
it turns out that they don't correspond to the <stdint.h> types used by
ILP32 newlib. GCC already knows what the correct <stdint.h> types are,
I just wasn't using the right interface to find them.
A consequence of this is that ILP32 newlib code needs to cast "int *"
pointers to "int32_t *" before passing them to s32 loads and stores,
since int32_t is defined as "long int" rather than "int". That matches
the normal C++ overloading behaviour for this target, where passing
"int *" to:
void f(int32_t *);
void f(int64_t *);
would be ambiguous. It also matches the corresponding <arm_neon.h>
behaviour.
2020-01-21 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/aarch64-sve-builtins.def: Use get_typenode_from_name
to get the integer element types.
gcc/testsuite/
* gcc.target/aarch64/sve/acle/general-c/load_1.c (f1): Cast to
int32_t * rather than int *.
* gcc.target/aarch64/sve/acle/general-c/load_2.c (f1): Likewise.
* gcc.target/aarch64/sve/acle/general-c/load_gather_sv_1.c
(f1): Likewise.
* gcc.target/aarch64/sve/acle/general-c/load_gather_sv_2.c
(f1): Likewise.
* gcc.target/aarch64/sve/acle/general-c/load_gather_sv_restricted_1.c
(f1): Likewise.
* gcc.target/aarch64/sve/acle/general-c/load_replicate_1.c
(f1): Likewise.
* gcc.target/aarch64/sve/acle/general-c/store_1.c (f1): Likewise.
* gcc.target/aarch64/sve/acle/general-c/store_2.c (f1): Likewise.
* gcc.target/aarch64/sve/acle/general-c/store_scatter_index_1.c
(f1): Likewise.
* gcc.target/aarch64/sve/acle/general-c/store_scatter_offset_2.c
(f1): Likewise.
* gcc.target/aarch64/sve/acle/general-c/store_scatter_offset_restricted_1.c
(f1): Likewise.
Richard Sandiford [Mon, 20 Jan 2020 19:29:25 +0000 (19:29 +0000)]
aarch64: Fix SVE ACLE handling of SImode pointers
This long-overdue patch promotes SImode pointers to DImode addresses,
avoiding various ICEs in the existing tests.
2020-01-21 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/aarch64-sve-builtins.h
(function_expander::convert_to_pmode): Declare.
* config/aarch64/aarch64-sve-builtins.cc
(function_expander::convert_to_pmode): New function.
(function_expander::get_contiguous_base): Use it.
(function_expander::prepare_gather_address_operands): Likewise.
* config/aarch64/aarch64-sve-builtins-sve2.cc
(svwhilerw_svwhilewr_impl::expand): Likewise.
Szabolcs Nagy [Wed, 15 Jan 2020 12:23:40 +0000 (12:23 +0000)]
[AArch64] PR92424: Fix -fpatchable-function-entry=N,M with BTI
This is a workaround that emits a BTI after the function label if that
is followed by a patch area. We try to remove the BTI that follows the
patch area (this may fail e.g. if the first instruction is a PACIASP).
So before this commit -fpatchable-function-entry=3,1 with bti generates
.section __patchable_function_entries
.8byte .LPFE
.text
.LPFE:
nop
foo:
nop
nop
bti c // or paciasp
...
and after this commit
.section __patchable_function_entries
.8byte .LPFE
.text
.LPFE:
nop
foo:
bti c
nop
nop
// may be paciasp
...
and with -fpatchable-function-entry=1 (M=0) the code now is
foo:
bti c
.section __patchable_function_entries
.8byte .LPFE
.text
.LPFE:
nop
// may be paciasp
...
There is a new bti insn in the middle of the patchable area users need
to be aware of unless M=0 (patch area is after the new bti) or M=N
(patch area is before the label, no new bti). Note: bti is not added to
all functions consistently (it can be turned off per function using a
target attribute or the compiler may detect that the function is never
called indirectly), so if bti is inserted in the middle of a patch area
then user code needs to deal with detecting it.
Tested on aarch64-none-linux-gnu.
gcc/ChangeLog:
PR target/92424
* config/aarch64/aarch64.c (aarch64_declare_function_name): Set
cfun->machine->label_is_assembled.
(aarch64_print_patchable_function_entry): New.
(TARGET_ASM_PRINT_PATCHABLE_FUNCTION_ENTRY): Define.
* config/aarch64/aarch64.h (struct machine_function): New field,
label_is_assembled.
gcc/testsuite/ChangeLog:
PR target/92424
* gcc.target/aarch64/pr92424-1.c: New test.
* gcc.target/aarch64/pr92424-2.c: New test.
* gcc.target/aarch64/pr92424-3.c: New test.
David Malcolm [Tue, 14 Jan 2020 16:32:13 +0000 (11:32 -0500)]
ipa-profile.c: reset call_sums state within ipa-profile.c (v2; PR 93315)
gcc/ChangeLog:
PR ipa/93315
* ipa-profile.c (ipa_profile): Delete call_sums and set it to
NULL on exit.
Matthew Malcomson [Tue, 21 Jan 2020 15:44:03 +0000 (15:44 +0000)]
[AArch64] effective_target for aarch64 f64mm asm
Commit
9ceec73 introduced intrinsics for the AArch64 FP64 matrix
multiply instructions. These require binutils support for the same
instructions.
This patch adds a DejaGNU test to ensure this binutils support is there
and uses it in the files that need this test.
Testing Done:
Checked on a cross-compiler that:
Tests running for binutils commit
e264b5b7a are listed as UNSUPPORTED.
Tests running for binutils commit
26916852e all pass.
gcc/testsuite/ChangeLog:
2020-01-21 Matthew Malcomson <matthew.malcomson@arm.com>
* gcc.target/aarch64/sve/acle/asm/ld1ro_f16.c: Use require
directive.
* gcc.target/aarch64/sve/acle/asm/ld1ro_f32.c: Likewise.
* gcc.target/aarch64/sve/acle/asm/ld1ro_f64.c: Likewise.
* gcc.target/aarch64/sve/acle/asm/ld1ro_s16.c: Likewise.
* gcc.target/aarch64/sve/acle/asm/ld1ro_s32.c: Likewise.
* gcc.target/aarch64/sve/acle/asm/ld1ro_s64.c: Likewise.
* gcc.target/aarch64/sve/acle/asm/ld1ro_s8.c: Likewise.
* gcc.target/aarch64/sve/acle/asm/ld1ro_u16.c: Likewise.
* gcc.target/aarch64/sve/acle/asm/ld1ro_u32.c: Likewise.
* gcc.target/aarch64/sve/acle/asm/ld1ro_u64.c: Likewise.
* gcc.target/aarch64/sve/acle/asm/ld1ro_u8.c: Likewise.
* lib/target-supports.exp: Add assembly requirement directive.
Jan Hubicka [Tue, 21 Jan 2020 15:33:43 +0000 (16:33 +0100)]
Fix updating of call_stmt_site_hash
This patch fixes ICE causes by call stmt site hash going out of sync. For
speculative edges it is assumed to contain a direct call so if we are
removing it hashtable needs to be updated. I realize that the code is ugly
but I will leave cleanup for next stage1.
Bootstrapped/regtested x86_64-linux. This patch makes it possible to build
Firefox again.
PR lto/93318
* cgraph.c (cgraph_edge::resolve_speculation,
cgraph_edge::redirect_call_stmt_to_callee): Fix update of
call_stmt_site_hash.
Jason Merrill [Mon, 20 Jan 2020 18:27:10 +0000 (13:27 -0500)]
PR c++/91476 - anon-namespace reference temp clash between TUs.
The problem in the PR was that make_temporary_var_for_ref_to_temp ran before
determine_visibility, so when we copied the linkage of the reference
variable it had not yet been restricted by its anonymous namespace context,
so the temporary wrongly ended up with TREE_PUBLIC set. The natural
solution is to run determine_visibility earlier. But that needs to happen
after maybe_commonize_var increases the linkage of some local variables, and
on targets without weak symbol support, that function does different things
based on the results of check_initializer, which is what calls
make_temporary_var_for_ref_to_temp. To break this circular dependency I'm
calling maybe_commonize_var early, and then again later if the target
doesn't support weak symbols.
It also occurred to me that make_temporary_var_for_ref_to_temp wasn't
handling DECL_VISIBILITY at all, and verified that we were doing the wrong
thing. So I've combined the linkage-copying code from there and two other
places.
* decl2.c (copy_linkage): Factor out of get_guard.
* call.c (make_temporary_var_for_ref_to_temp): Use it.
* decl.c (cp_finish_decomp): Use it.
(cp_finish_decl): determine_visibility sooner.
Martin Liska [Tue, 21 Jan 2020 14:53:34 +0000 (15:53 +0100)]
Remove dead variable.
* config/rs6000/rs6000.c (common_mode_defined): Remove
unused variable.
Tobias Burnus [Tue, 21 Jan 2020 12:42:11 +0000 (13:42 +0100)]
Fortran] PR93309 – permit repeated 'implicit none(external)'
PR fortran/93309
* interface.c (gfc_procedure_use): Also check parent namespace for
'implict none (external)'.
* symbol.c (gfc_get_namespace): Don't set has_implicit_none_export
to parent namespace's setting.
PR fortran/93309
* gfortran.dg/external_implicit_none_2.f90: New.
Richard Biener [Tue, 21 Jan 2020 09:37:18 +0000 (10:37 +0100)]
tree-optimization/92328 fix value-number with bogus type
We were actually value-numbering two entities with different type
the same rather than just having the same representation in the
hashtable. The following fixes that by wrapping the value in a
to be inserted VIEW_CONVERT_EXPR.
2020-01-21 Richard Biener <rguenther@suse.de>
PR tree-optimization/92328
* tree-ssa-sccvn.c (vn_reference_lookup_3): Preserve
type when value-numbering same-sized store by inserting a
VIEW_CONVERT_EXPR.
(eliminate_dom_walker::eliminate_stmt): When eliminating
a redundant store handle bit-reinterpretation of the same value.
* gcc.dg/torture/pr92328.c: New testcase.
Andrew Pinski [Tue, 21 Jan 2020 08:34:42 +0000 (08:34 +0000)]
Change recursive prepare_block_for_update to use a worklist
Reported as PR 93321, prepare_block_for_update with some huge
recusive inlining can go past the stack limit. Transforming this
recursive into worklist improves the stack usage here and we no
longer seg fault for the testcase. Note the order we walk the siblings
change.
ChangeLog:
PR tree-opt/93321
* tree-into-ssa.c (prepare_block_for_update_1): Split out from ...
(prepare_block_for_update): This. Use a worklist instead of recursing.
Mihail Ionescu [Tue, 21 Jan 2020 10:11:35 +0000 (10:11 +0000)]
[PATCH, GCC/ARM] Fix clear_operation_p uninitialised variable
2020-01-21 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
* gcc/config/arm/arm.c (clear_operation_p):
Initialise last_regno, skip first iteration
based on the first_set value and use ints instead
of the unnecessary HOST_WIDE_INTs.
Jakub Jelinek [Tue, 21 Jan 2020 08:17:27 +0000 (09:17 +0100)]
powerpc: Fix ICE with fp conditional move (PR target/93073)
The following testcase ICEs, because for TFmode the particular subtraction
pattern (*subtf3) is not enabled with the given options. Using
expand_simple_binop instead of emitting the subtraction by hand just moves
the ICE one insn later, NEG of ABS is not then recognized, etc., but
ultimately the problem is that when rs6000_emit_cmove is called for floating
point operand mode (and earlier condition ensures that in that case
compare_mode is also floating point), the expander makes sure the
operand mode is SFDF, but for the comparison mode nothing checks it, yet
there is just one *fsel* pattern with 2 separate SFDF iterators.
The following patch fixes it by giving up if compare_mode is not SFmode or
DFmode.
2020-01-21 Jakub Jelinek <jakub@redhat.com>
PR target/93073
* config/rs6000/rs6000.c (rs6000_emit_cmove): If using fsel, punt for
compare_mode other than SFmode or DFmode.
* gcc.target/powerpc/pr93073.c: New test.
Frederik Harwath [Mon, 20 Jan 2020 06:45:43 +0000 (07:45 +0100)]
Add runtime ISA check for amdgcn offloading
The HSA/ROCm runtime rejects binaries not built for the exact GPU device
present. So far, the libgomp amdgcn plugin does not verify that the GPU ISA
and the ISA specified at compile time match before handing over the binary to
the runtime. In case of a mismatch, the user is confronted with an unhelpful
runtime error.
This commit implements a runtime ISA check. In case of an ISA mismatch, the
execution is aborted with a clear error message and a hint at the correct
compilation parameters for the GPU on which the execution has been attempted.
libgomp/
* plugin/plugin-gcn.c (EF_AMDGPU_MACH): New enum.
* (EF_AMDGPU_MACH_MASK): New constant.
* (gcn_isa): New typedef.
* (gcn_gfx801_s): New constant.
* (gcn_gfx803_s): New constant.
* (gcn_gfx900_s): New constant.
* (gcn_gfx906_s): New constant.
* (gcn_isa_name_len): New constant.
* (elf_gcn_isa_field): New function.
* (isa_hsa_name): New function.
* (isa_gcc_name): New function.
* (isa_code): New function.
* (struct agent_info): Add field "device_isa" and remove field
"gfx900_p".
* (GOMP_OFFLOAD_init_device): Adapt agent init to "agent_info"
field changes, fail if device has unknown ISA.
* (parse_target_attributes): Replace "gfx900_p" by "device_isa".
* (isa_matches_agent): New function ...
* (create_and_finalize_hsa_program): ... used from here to check
that the GPU ISA and the code-object ISA match.
Bin Cheng [Tue, 21 Jan 2020 04:16:16 +0000 (12:16 +0800)]
Fix false warning messages about missing return in coroutine.
The patch sets current_function_returns_value flag in templates for
all co_return/co_yield/co_await cases, as well as for ramp function.
gcc/cp/ChangeLog
* coroutines.cc (finish_co_await_expr): Set return value flag.
(finish_co_yield_expr, morph_fn_to_coro): Ditto.
gcc/testsuite/ChangeLog
* g++.dg/coroutines/co-return-warning-1.C: New test.
Kito Cheng [Fri, 17 Jan 2020 11:49:15 +0000 (19:49 +0800)]
RISC-V: Disallow regrenme if the TO register never used before for interrupt functions
gcc/ChangeLog
PR target/93304
* config/riscv/riscv-protos.h (riscv_hard_regno_rename_ok): New.
* config/riscv/riscv.c (riscv_hard_regno_rename_ok): New.
* config/riscv/riscv.h (HARD_REGNO_RENAME_OK): Defined.
gcc/testsuite/ChangeLog
PR target/93304
* gcc.target/riscv/pr93304.c: New test.
GCC Administrator [Tue, 21 Jan 2020 00:16:31 +0000 (00:16 +0000)]
Daily bump.
Jonathan Wakely [Mon, 20 Jan 2020 20:37:52 +0000 (20:37 +0000)]
libstdc++: Fix recent documentation changes
* doc/xml/faq.xml: Fix grammar.
* doc/xml/manual/appendix_contributing.xml: Improve instructions.
* doc/xml/manual/spine.xml: Update copyright years.
* doc/html/*: Regenerate.
Joseph Myers [Mon, 20 Jan 2020 18:56:48 +0000 (18:56 +0000)]
Update GCC zh_TW.po.
* zh_TW.po: Update.
Andrew Stubbs [Thu, 14 Nov 2019 16:16:04 +0000 (16:16 +0000)]
Update OpenACC tests for amdgcn
2020-01-20 Andrew Stubbs <ams@codesourcery.com>
libgomp/
* testsuite/libgomp.oacc-c-c++-common/loop-auto-1.c: Skip test on gcn.
* testsuite/libgomp.oacc-c-c++-common/loop-dim-default.c (main):
Adjust test dimensions for amdgcn.
* testsuite/libgomp.oacc-c-c++-common/loop-gwv-1.c (main): Adjust
gang/worker/vector expectations dynamically.
* testsuite/libgomp.oacc-c-c++-common/loop-red-gwv-1.c
(main): Likewise.
* testsuite/libgomp.oacc-c-c++-common/loop-red-v-1.c (main): Likewise.
* testsuite/libgomp.oacc-c-c++-common/loop-red-v-2.c (main): Likewise.
* testsuite/libgomp.oacc-c-c++-common/loop-red-w-1.c (main): Likewise.
* testsuite/libgomp.oacc-c-c++-common/loop-red-w-2.c (main): Likewise.
* testsuite/libgomp.oacc-c-c++-common/loop-red-wv-1.c (main): Likewise.
* testsuite/libgomp.oacc-c-c++-common/loop-v-1.c (main): Likewise.
* testsuite/libgomp.oacc-c-c++-common/loop-w-1.c (main): Likewise.
* testsuite/libgomp.oacc-c-c++-common/loop-wv-1.c (main): Likewise.
* testsuite/libgomp.oacc-c-c++-common/parallel-dims.c
(acc_gang): Recognise acc_device_radeon.
(acc_worker): Likewise.
(acc_vector): Likewise.
(main): Set expectations for amdgcn.
* testsuite/libgomp.oacc-c-c++-common/routine-gwv-1.c
(main): Adjust gang/worker/vector expectations dynamically.
* testsuite/libgomp.oacc-c-c++-common/routine-v-1.c (main): Likewise.
* testsuite/libgomp.oacc-c-c++-common/routine-w-1.c (main): Likewise.
* testsuite/libgomp.oacc-c-c++-common/routine-wv-1.c (main): Likewise.
* testsuite/libgomp.oacc-c-c++-common/routine-wv-2.c: Set expectations
for amdgcn.
Wilco Dijkstra [Mon, 20 Jan 2020 14:29:40 +0000 (14:29 +0000)]
[AArch64] Set jump-align=4 for neoversen1
Testing shows the setting of 32:16 for jump alignment has a significant
codesize cost, however it doesn't make a difference in performance.
So set jump-align to 4 to get 1.6% codesize improvement.
gcc/
* config/aarch64/aarch64.c (neoversen1_tunings): Set jump_align to 4.
Andrew Pinski [Sat, 18 Jan 2020 00:41:06 +0000 (00:41 +0000)]
Fix PR 93242: patchable-function-entry broken on MIPS
On MIPS, .set noreorder/reorder needs to emitted around
the nop. The template for the nop instruction uses %(/%) to
do that. But default_print_patchable_function_entry uses
fprintf rather than output_asm_insn to output the instruction.
This fixes the problem by using output_asm_insn to emit the nop
instruction.
ChangeLog:
PR middle-end/93242
* targhooks.c (default_print_patchable_function_entry): Use
output_asm_insn to emit the nop instruction.
Martin Sebor [Mon, 20 Jan 2020 13:53:33 +0000 (14:53 +0100)]
PR testsuite/92829 - several -Wstringop-overflow test case failures on powerpc64
* g++.dg/warn/Wstringop-overflow-4.C: Adjust test to avoid failures
due to an aparrent VRP limtation.
* gcc.dg/Wstringop-overflow-25.c: Same.
Fangrui Song [Wed, 8 Jan 2020 04:46:26 +0000 (20:46 -0800)]
Align __patchable_function_entries to POINTER_SIZE [PR93194]
2020-01-20 Fangrui Song <maskray@google.com>
gcc/
PR middle-end/93194
* targhooks.c (default_print_patchable_function_entry): Align to
POINTER_SIZE.
Nathan Sidwell [Mon, 20 Jan 2020 13:39:59 +0000 (05:39 -0800)]
[PR 80005] Fix __has_include
__has_include is funky in that it is macro-like from the POV of #ifdef and
friends, but lexes its parenthesize argument #include-like. We were
failing the second part of that, because we used a forwarding macro to an
internal name, and hence always lexed the argument in macro-parameter
context. We componded that by not setting the right flag when lexing, so
it didn't even know. Mostly users got lucky.
This reimplements the handline.
1) Remove the forwarding, but declare object-like macros that
expand to themselves. This satisfies the #ifdef requirement
2) Correctly set angled_brackets when lexing the parameter. This tells
the lexer (a) <...> is a header name and (b) "..." is too (not a string).
3) Remove the in__has_include lexer state, just tell find_file that that's
what's happenning, so it doesn't emit an error.
We lose the (undocumented) ability to #undef __has_include. That may well
have been an accident of implementation. There are no tests for it.
We gain __has_include behaviour for all users of the preprocessors -- not
just the C-family ones that defined a forwarding macro.
libcpp/
PR preprocessor/80005
* include/cpplib.h (BT_HAS_ATTRIBUTE): Fix comment.
* internal.h (struct lexer_state): Delete in__has_include field.
(struct spec_nodes): Rename n__has_include{,_next}__ fields.
(_cpp_defined_macro_p): New.
(_cpp_find_file): Add has_include parm.
* directives.c (lex_macro_node): Combine defined,
__has_inline{,_next} checking.
(do_ifdef, do_ifndef): Use _cpp_defined_macro_p.
(_cpp_init_directives): Refactor.
* expr.c (parse_defined): Use _cpp_defined_macro_p.
(eval_token): Adjust parse_has_include calls.
(parse_has_include): Add OP parameter. Reimplement.
* files.c (_cpp_find_file): Add HAS_INCLUDE parm. Use it to
inhibit error message.
(_cpp_stack_include): Adjust _cpp_find_file call.
(_cpp_fake_include, _cpp_compare_file_date): Likewise.
(open_file_failed): Remove in__has_include check.
(_cpp_has_header): Adjust _cpp_find_file call.
* identifiers.c (_cpp_init_hashtable): Don't init
__has_include{,_next} here ...
* init.c (cpp_init_builtins): ... init them here. Define as
macros.
(cpp_read_main_file): Adjust _cpp_find_file call.
* pch.c (cpp_read_state): Adjust __has_include{,_next} access.
* traditional.c (_cpp_scan_out_locgical_line): Likewise.
gcc/c-family/
PR preprocessor/80005
* c-cppbuiltins.c (c_cpp_builtins): Don't define __has_include{,_next}.
gcc/testsuite/
PR preprocessor/80005
* g++.dg/cpp1y/feat-cxx14.C: Adjust.
* g++.dg/cpp1z/feat-cxx17.C: Adjust.
* g++.dg/cpp2a/feat-cxx2a.C: Adjust.
* g++.dg/cpp/pr80005.C: New.
Mark Eggleston [Mon, 20 Jan 2020 13:23:07 +0000 (13:23 +0000)]
[PATCH] PR Fortran/93263 Correct test case
Should've have checked for the existance of a non static integer
using scan-tree-dump instead of scan-tree-dump-not. A cut and paste
error.
H.J. Lu [Mon, 20 Jan 2020 13:02:14 +0000 (05:02 -0800)]
x32: Add x32 support to -mtls-dialect=gnu2
To add x32 support to -mtls-dialect=gnu2, we need to replace DI with
P in GNU2 TLS patterns. Since DEST set by tls_dynamic_gnu2_64 is in
ptr_mode, PLUS in GNU2 TLS address computation must be done in ptr_mode
to support -maddress-mode=long. Also replace the "{q}" suffix on lea
with "%z0" to support both 32-bit and 64-bit destination register.
Tested on Linux/x86-64.
gcc/
PR target/93319
* config/i386/i386.c (legitimize_tls_address): Pass Pmode to
gen_tls_dynamic_gnu2_64. Compute GNU2 TLS address in ptr_mode.
* config/i386/i386.md (tls_dynamic_gnu2_64): Renamed to ...
(@tls_dynamic_gnu2_64_<mode>): This. Replace DI with P.
(*tls_dynamic_gnu2_lea_64): Renamed to ...
(*tls_dynamic_gnu2_lea_64_<mode>): This. Replace DI with P.
Remove the {q} suffix from lea.
(*tls_dynamic_gnu2_call_64): Renamed to ...
(*tls_dynamic_gnu2_call_64_<mode>): This. Replace DI with P.
(*tls_dynamic_gnu2_combine_64): Renamed to ...
(*tls_dynamic_gnu2_combine_64_<mode>): This. Replace DI with P.
Pass Pmode to gen_tls_dynamic_gnu2_64.
gcc/testsuite/
PR target/93319
* gcc.target/i386/pr93319-1a.c: New test.
* gcc.target/i386/pr93319-1b.c: Likewise.
* gcc.target/i386/pr93319-1c.c: Likewise.
* gcc.target/i386/pr93319-1d.c: Likewise.
Wilco Dijkstra [Mon, 20 Jan 2020 13:09:15 +0000 (13:09 +0000)]
[AArch64] Set SLOW_BYTE_ACCESS
Contrary to all documentation, SLOW_BYTE_ACCESS simply means accessing
bitfields by their declared type, which results in better codegeneration.
gcc/
* config/aarch64/aarch64.h (SLOW_BYTE_ACCESS): Set to 1.
Richard Sandiford [Sat, 18 Jan 2020 14:49:39 +0000 (14:49 +0000)]
aarch64: Remove parameter name and ATTRIBUTE_UNUSED
2020-01-20 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/aarch64-sve-builtins-base.cc
(svld1ro_impl::memory_vector_mode): Remove parameter name.
Richard Biener [Mon, 20 Jan 2020 09:36:09 +0000 (10:36 +0100)]
debug/92763 keep DIEs that might be used in DW_TAG_inlined_subroutine
We were pruning type-local subroutine DIEs if their context is unused
despite us later needing those DIEs as abstract origins for inlines.
The patch makes code already present for -fvar-tracking-assignments
unconditional.
2020-01-20 Richard Biener <rguenther@suse.de>
PR debug/92763
* dwarf2out.c (prune_unused_types): Unconditionally mark
called function DIEs.
* g++.dg/debug/pr92763.C: New testcase.
Richard Earnshaw [Mon, 20 Jan 2020 10:37:29 +0000 (10:37 +0000)]
contrib: New remotes structure for vendor and personal refs
The initial structure for vendor and personal branches makes use of
the default remote (normally origin) for the upstream
repository). Unfortunately, this causes some confusion, especially for
personal branches because a push will not push to the correct upstream
location. This can be 'fixed' by adding a push refspec for the remote,
but that has the unfortunate consequence of breaking the push.default
behaviour for git push, and it becomes too easy to accidentally commit
something unintended to the main parts of the repository.
To work around this, this patch changes the configuration to use
separate 'remotes' for these additional refs, with one remote for the
personal space and another remote for each vendor's space. The
personal space is called after the user's preferred branch-space
prefix (default 'me'), the vendor spaces are called
vendors/<vendor-name>.
As far as possible, I've made the script automatically restructure any
existing fetch or push lines that earlier versions of the scripts may
have created - the gcc-git-customization.sh script will convert all
vendor refs that it can find, so it is not necessary to re-add any
vendors you've already added.
You might, however, want to run
git remote prune <origin>
after running to clean up any stale upstream-refs that might still be
in your local repo, and then
git fetch vendors/<vendor>
or
git fetch <me>
to re-populate the remotes/ structures.
Also, for any branch you already have that tracks a personal or vendor
branch upstream, you might need to run
git config branch.<name>.remote <new-remote>
so that merges and pushes go to the right place (I haven't attempted
to automate this last part).
For vendors, the new structure means that
git checkout -b <vendor>/<branch> remotes/vendors/<vendor>/<branch>
will correctly set up a remote tracking branch.
Please be aware that if you have multiple personal branches set up, then
git push <me>
will still consider all of them for pushing. If you only want to push
one branch, then either write
git push <me> HEAD
or
git push <me> <me>/branch
as appropriate.
And don't forget '-n' (--dry-run) to see what would be done if this
were not a dry run.
Finally, now that the vendors spaces are isolated from each other and
from the other spaces, I've added an option "--enable-push" to
git-fetch-vendor.sh. If passed, then a "push" spec will be added for
that vendor to enable pushing to the upstream. If you re-run the
script for the same vendor without the option, the push spec will be
removed.
* gcc-git-customization.sh: Check that user-supplied remote
name exists before continuting. Use a separate remotes for the
personal commit area. Convert existing personal and vendor
fetch rules to new layout.
* git-fetch-vendor.sh: New vendor layout. Add --enable-push
option.
Paolo Carlini [Mon, 20 Jan 2020 10:17:19 +0000 (11:17 +0100)]
Add testcase of PR c++/92536, already fixed.
PR c++/92536
* g++.dg/cpp1z/pr92536.C: New.
Martin Liska [Mon, 20 Jan 2020 10:10:30 +0000 (11:10 +0100)]
Record outer non-cleanup region in TREE EH.
PR tree-optimization/93199
* tree-eh.c (struct leh_state): Add
new field outer_non_cleanup.
(cleanup_is_dead_in): Pass leh_state instead
of eh_region. Add a checking that state->outer_non_cleanup
points to outer non-clean up region.
(lower_try_finally): Record outer_non_cleanup
for this_state.
(lower_catch): Likewise.
(lower_eh_filter): Likewise.
(lower_eh_must_not_throw): Likewise.
(lower_cleanup): Likewise.
Richard Biener [Wed, 15 Jan 2020 13:25:38 +0000 (14:25 +0100)]
tree-optimization/93094 pass down VECTORIZED_CALL to versioning
When versioning is run the IL is already mangled and finding
a VECTORIZED_CALL IFN can fail.
2020-01-20 Richard Biener <rguenther@suse.de>
PR tree-optimization/93094
* tree-vectorizer.h (vect_loop_versioning): Adjust.
(vect_transform_loop): Likewise.
* tree-vectorizer.c (try_vectorize_loop_1): Pass down
loop_vectorized_call to vect_transform_loop.
* tree-vect-loop.c (vect_transform_loop): Pass down
loop_vectorized_call to vect_loop_versioning.
* tree-vect-loop-manip.c (vect_loop_versioning): Use
the earlier discovered loop_vectorized_call.
* gcc.dg/vect/pr93094.c: New testcase.
Eric S. Raymond [Mon, 20 Jan 2020 01:12:29 +0000 (17:12 -0800)]
Clean up references to Subversion in documentation sources.
Clean up references to SVN in in the GCC docs, redirecting to Git
documentation as appropriate.
Where references to "the source code repository" rather than a
specific VCS make sense, I have used them. You might, after
all, change VCSes again someday.
I have not modified either generated HTML files nor maintainer scripts.
These changes should be complete with repect to the documentation tree.
2020-01-19 Eric S. Raymond <esr@thyrsus.com>
gcc/
* doc/contribute.texi: Update for SVN -> Git transition.
* doc/install.texi: Likewise.
libstdc++-v3
* doc/xml/faq.xml: Update for SVN -> Git transition.
* doc/xml/manual/appendix_contributing.xml: Likewise.
* doc/xml/manual/status_cxx1998.xml: Likewise.
* doc/xml/manual/status_cxx2011.xml: Likewise.
* doc/xml/manual/status_cxx2014.xml: Likewise.
* doc/xml/manual/status_cxx2017.xml: Likewise.
* doc/xml/manual/status_cxx2020.xml: Likewise.
* doc/xml/manual/status_cxxtr1.xml: Likewise.
* doc/xml/manual/status_cxxtr24733.xml: Likewise.
David Malcolm [Fri, 17 Jan 2020 18:12:25 +0000 (13:12 -0500)]
analyzer: ensure that all DejaGnu tests have unique names
gcc/testsuite/ChangeLog:
* gcc.dg/analyzer/CVE-2005-1689-dedupe-issue.c: Ensure that all
test names are unique.
* gcc.dg/analyzer/attribute-nonnull.c: Likewise.
* gcc.dg/analyzer/conditionals-notrans.c: Likewise.
* gcc.dg/analyzer/data-model-1.c: Likewise.
* gcc.dg/analyzer/data-model-18.c: Likewise.
* gcc.dg/analyzer/data-model-8.c: Likewise.
* gcc.dg/analyzer/data-model-9.c: Likewise.
* gcc.dg/analyzer/file-1.c: Likewise.
* gcc.dg/analyzer/file-paths-1.c: Likewise.
* gcc.dg/analyzer/loop-2.c: Likewise.
* gcc.dg/analyzer/loop-2a.c: Likewise.
* gcc.dg/analyzer/loop-4.c: Likewise.
* gcc.dg/analyzer/loop.c: Likewise.
* gcc.dg/analyzer/malloc-1.c: Likewise.
* gcc.dg/analyzer/malloc-2.c: Likewise.
* gcc.dg/analyzer/malloc-ipa-10.c: Likewise.
* gcc.dg/analyzer/malloc-ipa-2.c: Likewise.
* gcc.dg/analyzer/malloc-macro-separate-events.c: Likewise.
* gcc.dg/analyzer/malloc-paths-1.c: Likewise.
* gcc.dg/analyzer/malloc-paths-2.c: Likewise.
* gcc.dg/analyzer/malloc-paths-3.c: Likewise.
* gcc.dg/analyzer/malloc-paths-4.c: Likewise.
* gcc.dg/analyzer/malloc-paths-5.c: Likewise.
* gcc.dg/analyzer/malloc-paths-7.c: Likewise.
* gcc.dg/analyzer/malloc-paths-9.c: Likewise.
* gcc.dg/analyzer/operations.c: Likewise.
* gcc.dg/analyzer/params.c: Likewise.
* gcc.dg/analyzer/pattern-test-1.c: Likewise.
* gcc.dg/analyzer/pattern-test-2.c: Likewise.
* gcc.dg/analyzer/sensitive-1.c: Likewise.
* gcc.dg/analyzer/switch.c: Likewise.
* gcc.dg/analyzer/taint-1.c: Likewise.
* gcc.dg/analyzer/unknown-fns.c: Likewise.
GCC Administrator [Mon, 20 Jan 2020 00:16:31 +0000 (00:16 +0000)]
Daily bump.
Hans-Peter Nilsson [Sun, 19 Jan 2020 19:38:06 +0000 (20:38 +0100)]
testsuite: effective_target_march_option: support checking for -march=*
* lib/target-supports.exp (effective_target_march_option): New.
I see no (other) way to, depending on the absence of an option,
add an option for a specific target.
For gcc.dg/torture/pr26515.c and cris-elf, you get an error for
supplying multiple (different) -march=... options (where that
error is desirable), like testing cris-elf with
RUNTESTFLAGS=--target_board=cris-sim/arch=v8, where otherwise
-march=v10 and -march=v8 will both be given, and the test would
fail.
For historians, this was accidentally misordered and committed after
the (first) patch using march_option. Oops.
Hans-Peter Nilsson [Sun, 19 Jan 2020 19:29:52 +0000 (20:29 +0100)]
testsuite: Make use of effective-target march_option for cris
* gcc.dg/torture/pr26515.c (cris*-*-*): Conditionalize
-march=v10 option on target ! march_option.
* gcc.target/cris/asm-v10.S, gcc.target/cris/inasm-v10.c,
gcc.target/cris/sync-1-v10.c: Similar.
Jason Merrill [Sun, 19 Jan 2020 14:14:54 +0000 (09:14 -0500)]
PR c++/33799 - destroy return value, take 2.
This patch differs from the reverted patch for 33799 in that it adds the
CLEANUP_STMT for the return value at the end of the function, and only if
we've seen a cleanup that might throw, so it should not affect most C++11
code.
* cp-tree.h (current_retval_sentinel): New macro.
(struct language_function): Add throwing_cleanup bitfield.
* decl.c (cxx_maybe_build_cleanup): Set it.
* except.c (maybe_set_retval_sentinel)
(maybe_splice_retval_cleanup): New functions.
* parser.c (cp_parser_compound_statement): Call
maybe_splice_retval_cleanup.
* typeck.c (check_return_expr): Call maybe_set_retval_sentinel.
Jason Merrill [Sun, 19 Jan 2020 14:15:26 +0000 (09:15 -0500)]
Simplify lambda parsing.
Since we removed the special parsing for C++11 lambdas, it's just been an
open-coded copy of cp_parser_function_body. So let's call it instead. This
avoids the need to change this code in my revised 33799 patch.
* parser.c (cp_parser_lambda_body): Use cp_parser_function_body.
Jan Hubicka [Sun, 19 Jan 2020 15:41:11 +0000 (16:41 +0100)]
Implement speculative call verifier
this patch implements verifier and fixes one bug where speculative calls
produced by ipa-devirt ended up having num_speculative_call_targets = 0
instead of 1.
* cgraph.c (cgraph_edge::make_speculative): Increase number of
speculative targets.
(verify_speculative_call): New function
(cgraph_node::verify_node): Use it.
* ipa-profile.c (ipa_profile): Fix formating; do not set number of
speculations.
Jan Hubicka [Sun, 19 Jan 2020 12:49:38 +0000 (13:49 +0100)]
Fix ICE in speculative_call_info
this fixes two issues with the new multi-target speculation code which reproduce
on Firefox. I can now build firefox with FDO locally but on Mozilla build bots
it still fails with ICE in speculative_call_info.
One problem is that speuclative code compares call_stmt and lto_stmt_uid in
a way that may get unwanted effect when these gets out of sync. It does not
make sense to have both non-zero so I added code clearing it and sanity check
that it is kept this way.
Other problem is cgraph_edge::make_direct not working well with multiple
targets. In this case it removed one speuclative target and the indirect call
leaving other targets in the tree.
This is fixed by iterating across all targets and removing all except the good
one (if it exists).
PR lto/93318
* cgraph.c (cgraph_edge::resolve_speculation): Fix foramting.
(cgraph_edge::make_direct): Remove all indirect targets.
(cgraph_edge::redirect_call_stmt_to_callee): Use make_direct..
(cgraph_node::verify_node): Verify that only one call_stmt or
lto_stmt_uid is set.
* cgraphclones.c (cgraph_edge::clone): Set only one call_stmt or
lto_stmt_uid.
* lto-cgraph.c (lto_output_edge): Simplify streaming of stmt.
(lto_output_ref): Simplify streaming of stmt.
* lto-streamer-in.c (fixup_call_stmt_edges_1): Clear lto_stmt_uid.
Thomas König [Thu, 16 Jan 2020 21:09:37 +0000 (22:09 +0100)]
Check for illegal reference in function.
GCC Administrator [Sun, 19 Jan 2020 00:16:30 +0000 (00:16 +0000)]
Daily bump.
Jakub Jelinek [Sat, 18 Jan 2020 18:22:21 +0000 (19:22 +0100)]
c++: Fix coroutines.cc build for nvptx-none target
When building offloading cross-compiler from x86_64-linux to nvptx-none, the
build fails with:
../../gcc/cp/coroutines.cc: In function 'tree_node* get_fn_local_identifier(tree, const char*)':
../../gcc/cp/coroutines.cc:2255:12: error: expected ';' before 'char'
2255 | sep = "$"
| ^
| ;
......
2262 | char *an;
| ~~~~
2020-01-18 Jakub Jelinek <jakub@redhat.com>
* coroutines.cc (get_fn_local_identifier): Fix NO_DOT_IN_LABEL
but non-NO_DOLLAR_IN_LABEL case build.
Hans-Peter Nilsson [Sat, 18 Jan 2020 15:31:38 +0000 (16:31 +0100)]
libgcc: cris: config/cris/arit.c (DS): Apply attribute __fallthrough__.
* config/cris/arit.c (DS): Apply attribute fallthrough.
Without this, there are, for each compilation of arit.c, 30ish
occurrences of "this statement may fall through
[-Wimplicit-fallthrough=]", for lines that look like
case 32: DS; case 31: DS; case 30: DS; case 29: DS;
John David Anglin [Sat, 18 Jan 2020 15:30:29 +0000 (10:30 -0500)]
Fix compilation of crtstuff.c when DEFAULT_USE_CXA_ATEXIT is false
PR libgcc/92988
* crtstuff.c (__do_global_dtors_aux): Only call __cxa_finalize if
DEFAULT_USE_CXA_ATEXIT is true.
Tamar Christina [Sat, 18 Jan 2020 14:03:31 +0000 (14:03 +0000)]
AArch64: Fix unused variable warning breaking bootstrap.
This marks the parameter &fi as unused so it doesn't
cause a boostrap failure.
committed under the obvious rule.
gcc/ChangeLog:
* config/aarch64/aarch64-sve-builtins-base.cc (memory_vector_mode):
Mark parameter unused.
Jakub Jelinek [Sat, 18 Jan 2020 12:54:08 +0000 (13:54 +0100)]
testsuite: Fix dg-message syntax.
2020-01-18 Jakub Jelinek <jakub@redhat.com>
PR c/92833
* c-c++-common/pr92833-4.c: Fix dg-message syntax.
Hans-Peter Nilsson [Sat, 18 Jan 2020 13:23:59 +0000 (14:23 +0100)]
config.gcc <obsolete targets>: Add crisv32-*-* and cris-*-linux*
I'm sorry to say that there's no incentive to maintain
crisv32-*-* and cris-*-linux* configurations beyond nostalgia,
(and I'm out of that for the moment). Support in the Linux
kernel for either applicable CRIS variant (CRIS v10 and CRIS
v32) is gone since 2018. Their related part of the cc0
transition workload would be noticable. Note that cris-elf
remains, but crisv32-elf and the CRIS v32 multilib will be
removed, at least for now.
I'm not completely happy about the message (the next-next line
after the context) "*** unless a maintainer comes forward"
because it'd have to be at an infinitesimal maintenance cost to
the cris-elf support. Still, I'm not bothered enough to add
another case construct or means for "planned obsolescence".
Gerald Pfeifer [Sat, 18 Jan 2020 12:49:05 +0000 (13:49 +0100)]
Reword a comment in varpool_node::ctor_useable_for_folding_p.
* varpool.c (ctor_useable_for_folding_p): Fix grammar.
Iain Sandoe [Wed, 4 Dec 2019 11:39:38 +0000 (11:39 +0000)]
[libiberty] Update demangler to handle co_await operator.
C++20 coroutines introduces a new operator with a mangling of 'aw'.
This patch adds that to libiberty's demangler.
libiberty/ChangeLog:
2020-01-18 Iain Sandoe <iain@sandoe.co.uk>
* cp-demangle.c (cplus_demangle_operators): Add the co_await
operator.
* testsuite/demangle-expected: Test co_await operator mangling.
Iain Sandoe [Sat, 18 Jan 2020 11:54:46 +0000 (11:54 +0000)]
[C++ coroutines] Initial implementation.
This is the squashed version of the first 6 patches that were split to
facilitate review.
The changes to libiberty (7th patch) to support demangling the co_await
operator stand alone and are applied separately.
The patch series is an initial implementation of a coroutine feature,
expected to be standardised in C++20.
Standardisation status (and potential impact on this implementation)
--------------------------------------------------------------------
The facility was accepted into the working draft for C++20 by WG21 in
February 2019. During following WG21 meetings, design and national body
comments have been reviewed, with no significant change resulting.
The current GCC implementation is against n4835 [1].
At this stage, the remaining potential for change comes from:
* Areas of national body comments that were not resolved in the version we
have worked to:
(a) handling of the situation where aligned allocation is available.
(b) handling of the situation where a user wants coroutines, but does not
want exceptions (e.g. a GPU).
* Agreed changes that have not yet been worded in a draft standard that we
have worked to.
It is not expected that the resolution to these can produce any major
change at this phase of the standardisation process. Such changes should be
limited to the coroutine-specific code.
ABI
---
The various compiler developers 'vendors' have discussed a minimal ABI to
allow one implementation to call coroutines compiled by another.
This amounts to:
1. The layout of a public portion of the coroutine frame.
Coroutines need to preserve state across suspension points, the storage for
this is called a "coroutine frame".
The ABI mandates that pointers into the coroutine frame point to an area
begining with two function pointers (to the resume and destroy functions
described below); these are immediately followed by the "promise object"
described in the standard.
This is sufficient that the builtins can take a coroutine frame pointer and
determine the address of the promise (or call the resume/destroy functions).
2. A number of compiler builtins that the standard library might use.
These are implemented by this patch series.
3. This introduces a new operator 'co_await' the mangling for which is also
agreed between vendors (and has an issue filed for that against the upstream
c++abi). Demangling for this is added to libiberty in a separate patch.
The ABI has currently no target-specific content (a given psABI might elect
to mandate alignment, but the common ABI does not do this).
Standard Library impact
-----------------------
The current implementations require addition of only a single header to
the standard library (no change to the runtime). This header is part of
the patch.
GCC Implementation outline
--------------------------
The standard's design for coroutines does not decorate the definition of
a coroutine in any way, so that a function is only known to be a coroutine
when one of the keywords (co_await, co_yield, co_return) is encountered.
This means that we cannot special-case such functions from the outset, but
must process them differently when they are finalised - which we do from
"finish_function ()".
At a high level, this design of coroutine produces four pieces from the
original user's function:
1. A coroutine state frame (taking the logical place of the activation
record for a regular function). One item stored in that state is the
index of the current suspend point.
2. A "ramp" function
This is what the user calls to construct the coroutine frame and start
the coroutine execution. This will return some object representing the
coroutine's eventual return value (or means to continue it when it it
suspended).
3. A "resume" function.
This is what gets called when a the coroutine is resumed when suspended.
4. A "destroy" function.
This is what gets called when the coroutine state should be destroyed
and its memory released.
The standard's coroutines involve cooperation of the user's authored function
with a provided "promise" class, which includes mandatory methods for
handling the state transitions and providing output values. Most realistic
coroutines will also have one or more 'awaiter' classes that implement the
user's actions for each suspend point. As we parse (or during template
expansion) the types of the promise and awaiter classes become known, and can
then be verified against the signatures expected by the standard.
Once the function is parsed (and templates expanded) we are able to make the
transformation into the four pieces noted above.
The implementation here takes the approach of a series of AST transforms.
The state machine suspend points are encoded in three internal functions
(one of which represents an exit from scope without cleanups). These three
IFNs are lowered early in the middle end, such that the majority of GCC's
optimisers can be run on the resulting output.
As a design choice, we have carried out the outlining of the user's function
in the front end, and taken advantage of the existing middle end's abilities
to inline and DCE where that is profitable.
Since the state machine is actually common to both resumer and destroyer
functions, we make only a single function "actor" that contains both the
resume and destroy paths. The destroy function is represented by a small
stub that sets a value to signal the use of the destroy path and calls the
actor. The idea is that optimisation of the state machine need only be done
once - and then the resume and destroy paths can be identified allowing the
middle end's inline and DCE machinery to optimise as profitable as noted
above.
The middle end components for this implementation are:
A pass that:
1. Lowers the coroutine builtins that allow the standard library header to
interact with the coroutine frame (these fairly simple logical or
numerical substitution of values, given a coroutine frame pointer).
2. Lowers the IFN that represents the exit from state without cleanup.
Essentially, this becomes a gimple goto.
3. Sets the final size of the coroutine frame at this stage.
A second pass (that requires the revised CFG that results from the lowering
of the scope exit IFNs in the first).
1. Lower the IFNs that represent the state machine paths for the resume and
destroy cases.
Patches squashed into this commit:
[C++ coroutines 1] Common code and base definitions.
This part of the patch series provides the gating flag, the keywords,
cpp defines etc.
[C++ coroutines 2] Define builtins and internal functions.
This part of the patch series provides the builtin functions
used by the standard library code and the internal functions
used to implement lowering of the coroutine state machine.
[C++ coroutines 3] Front end parsing and transforms.
There are two parts to this.
1. Parsing, template instantiation and diagnostics for the standard-
mandated class entries.
The user authors a function that becomes a coroutine (lazily) by
making use of any of the co_await, co_yield or co_return keywords.
Unlike a regular function, where the activation record is placed on the
stack, and is destroyed on function exit, a coroutine has some state that
persists between calls - the 'coroutine frame' (thus analogous to a stack
frame).
We transform the user's function into three pieces:
1. A so-called ramp function, that establishes the coroutine frame and
begins execution of the coroutine.
2. An actor function that contains the state machine corresponding to the
user's suspend/resume structure.
3. A stub function that calls the actor function in 'destroy' mode.
The actor function is executed:
* from "resume point 0" by the ramp.
* from resume point N ( > 0 ) for handle.resume() calls.
* from the destroy stub for destroy point N for handle.destroy() calls.
The C++ coroutine design described in the standard makes use of some helper
methods that are authored in a so-called "promise" class provided by the
user.
At parse time (or post substitution) the type of the coroutine promise
will be determined. At that point, we can look up the required promise
class methods and issue diagnostics if they are missing or incorrect. To
avoid repeating these actions at code-gen time, we make use of temporary
'proxy' variables for the coroutine handle and the promise - which will
eventually be instantiated in the coroutine frame.
Each of the keywords will expand to a code sequence (although co_yield is
just syntactic sugar for a co_await).
We defer the analysis and transformatin until template expansion is
complete so that we have complete types at that time.
2. AST analysis and transformation which performs the code-gen for the
outlined state machine.
The entry point here is morph_fn_to_coro () which is called from
finish_function () when we have completed any template expansion.
This is preceded by helper functions that implement the phases below.
The process proceeds in four phases.
A Initial framing.
The user's function body is wrapped in the initial and final suspend
points and we begin building the coroutine frame.
We build empty decls for the actor and destroyer functions at this
time too.
When exceptions are enabled, the user's function body will also be
wrapped in a try-catch block with the catch invoking the promise
class 'unhandled_exception' method.
B Analysis.
The user's function body is analysed to determine the suspend points,
if any, and to capture local variables that might persist across such
suspensions. In most cases, it is not necessary to capture compiler
temporaries, since the tree-lowering nests the suspensions correctly.
However, in the case of a captured reference, there is a lifetime
extension to the end of the full expression - which can mean across a
suspend point in which case it must be promoted to a frame variable.
At the conclusion of analysis, we have a conservative frame layout and
maps of the local variables to their frame entry points.
C Build the ramp function.
Carry out the allocation for the coroutine frame (NOTE; the actual size
computation is deferred until late in the middle end to allow for future
optimisations that will be allowed to elide unused frame entries).
We build the return object.
D Build and expand the actor and destroyer function bodies.
The destroyer is a trivial shim that sets a bit to indicate that the
destroy dispatcher should be used and then calls into the actor.
The actor function is the implementation of the user's state machine.
The current suspend point is noted in an index.
Each suspend point is encoded as a pair of internal functions, one in
the relevant dispatcher, and one representing the suspend point.
During this process, the user's local variables and the proxies for the
self-handle and the promise class instanceare re-written to their
coroutine frame equivalents.
The complete bodies for the ramp, actor and destroy function are passed
back to finish_function for folding and gimplification.
[C++ coroutines 4] Middle end expanders and transforms.
The first part of this is a pass that provides:
* expansion of the library support builtins, these are simple boolean
or numerical substitutions.
* The functionality of implementing an exit from scope without cleanup
is performed here by lowering an IFN to a gimple goto.
This pass has to run for non-coroutine functions, since functions calling
the builtins are not necessarily coroutines (i.e. they are implementing the
library interfaces which may be called from anywhere).
The second part is the expansion of the coroutine IFNs that describe the
state machine connections to the dispatchers. This only has to be run
for functions that are coroutine components. The work done by this pass
is:
In the front end we construct a single actor function that contains
the coroutine state machine.
The actor function has three entry conditions:
1. from the ramp, resume point 0 - to initial-suspend.
2. when resume () is executed (resume point N).
3. from the destroy () shim when that is executed.
The actor function begins with two dispatchers; one for resume and
one for destroy (where the initial entry from the ramp is a special-
case of resume point 0).
Each suspend point and each dispatch entry is marked with an IFN such
that we can connect the relevant dispatchers to their target labels.
So, if we have:
CO_YIELD (NUM, FINAL, RES_LAB, DEST_LAB, FRAME_PTR)
This is await point NUM, and is the final await if FINAL is non-zero.
The resume point is RES_LAB, and the destroy point is DEST_LAB.
We expect to find a CO_ACTOR (NUM) in the resume dispatcher and a
CO_ACTOR (NUM+1) in the destroy dispatcher.
Initially, the intent of keeping the resume and destroy paths together
is that the conditionals controlling them are identical, and thus there
would be duplication of any optimisation of those paths if the split
were earlier.
Subsequent inlining of the actor (and DCE) is then able to extract the
resume and destroy paths as separate functions if that is found
profitable by the optimisers.
Once we have remade the connections to their correct postions, we elide
the labels that the front end inserted.
[C++ coroutines 5] Standard library header.
This provides the interfaces mandated by the standard and implements
the interaction with the coroutine frame by means of inline use of
builtins expanded at compile-time. There should be a 1:1 correspondence
with the standard sections which are cross-referenced.
There is no runtime content.
At this stage, we have the content in an inline namespace "__n4835" for
the CD we worked to.
[C++ coroutines 6] Testsuite.
There are two categories of test:
1. Checks for correctly formed source code and the error reporting.
2. Checks for transformation and code-gen.
The second set are run as 'torture' tests for the standard options
set, including LTO. These are also intentionally run with no options
provided (from the coroutines.exp script).
gcc/ChangeLog:
2020-01-18 Iain Sandoe <iain@sandoe.co.uk>
* Makefile.in: Add coroutine-passes.o.
* builtin-types.def (BT_CONST_SIZE): New.
(BT_FN_BOOL_PTR): New.
(BT_FN_PTR_PTR_CONST_SIZE_BOOL): New.
* builtins.def (DEF_COROUTINE_BUILTIN): New.
* coroutine-builtins.def: New file.
* coroutine-passes.cc: New file.
* function.h (struct GTY function): Add a bit to indicate that the
function is a coroutine component.
* internal-fn.c (expand_CO_FRAME): New.
(expand_CO_YIELD): New.
(expand_CO_SUSPN): New.
(expand_CO_ACTOR): New.
* internal-fn.def (CO_ACTOR): New.
(CO_YIELD): New.
(CO_SUSPN): New.
(CO_FRAME): New.
* passes.def: Add pass_coroutine_lower_builtins,
pass_coroutine_early_expand_ifns.
* tree-pass.h (make_pass_coroutine_lower_builtins): New.
(make_pass_coroutine_early_expand_ifns): New.
* doc/invoke.texi: Document the fcoroutines command line
switch.
gcc/c-family/ChangeLog:
2020-01-18 Iain Sandoe <iain@sandoe.co.uk>
* c-common.c (co_await, co_yield, co_return): New.
* c-common.h (RID_CO_AWAIT, RID_CO_YIELD,
RID_CO_RETURN): New enumeration values.
(D_CXX_COROUTINES): Bit to identify coroutines are active.
(D_CXX_COROUTINES_FLAGS): Guard for coroutine keywords.
* c-cppbuiltin.c (__cpp_coroutines): New cpp define.
* c.opt (fcoroutines): New command-line switch.
gcc/cp/ChangeLog:
2020-01-18 Iain Sandoe <iain@sandoe.co.uk>
* Make-lang.in: Add coroutines.o.
* cp-tree.h (lang_decl-fn): coroutine_p, new bit.
(DECL_COROUTINE_P): New.
* lex.c (init_reswords): Enable keywords when the coroutine flag
is set,
* operators.def (co_await): New operator.
* call.c (add_builtin_candidates): Handle CO_AWAIT_EXPR.
(op_error): Likewise.
(build_new_op_1): Likewise.
(build_new_function_call): Validate coroutine builtin arguments.
* constexpr.c (potential_constant_expression_1): Handle
CO_AWAIT_EXPR, CO_YIELD_EXPR, CO_RETURN_EXPR.
* coroutines.cc: New file.
* cp-objcp-common.c (cp_common_init_ts): Add CO_AWAIT_EXPR,
CO_YIELD_EXPR, CO_RETRN_EXPR as TS expressions.
* cp-tree.def (CO_AWAIT_EXPR, CO_YIELD_EXPR, (CO_RETURN_EXPR): New.
* cp-tree.h (coro_validate_builtin_call): New.
* decl.c (emit_coro_helper): New.
(finish_function): Handle the case when a function is found to
be a coroutine, perform the outlining and emit the outlined
functions. Set a bit to signal that this is a coroutine component.
* parser.c (enum required_token): New enumeration RT_CO_YIELD.
(cp_parser_unary_expression): Handle co_await.
(cp_parser_assignment_expression): Handle co_yield.
(cp_parser_statement): Handle RID_CO_RETURN.
(cp_parser_jump_statement): Handle co_return.
(cp_parser_operator): Handle co_await operator.
(cp_parser_yield_expression): New.
(cp_parser_required_error): Handle RT_CO_YIELD.
* pt.c (tsubst_copy): Handle CO_AWAIT_EXPR.
(tsubst_expr): Handle CO_AWAIT_EXPR, CO_YIELD_EXPR and
CO_RETURN_EXPRs.
* tree.c (cp_walk_subtrees): Likewise.
libstdc++-v3/ChangeLog:
2020-01-18 Iain Sandoe <iain@sandoe.co.uk>
* include/Makefile.am: Add coroutine to the std set.
* include/Makefile.in: Regenerated.
* include/std/coroutine: New file.
gcc/testsuite/ChangeLog:
2020-01-18 Iain Sandoe <iain@sandoe.co.uk>
* g++.dg/coroutines/co-await-syntax-00-needs-expr.C: New test.
* g++.dg/coroutines/co-await-syntax-01-outside-fn.C: New test.
* g++.dg/coroutines/co-await-syntax-02-outside-fn.C: New test.
* g++.dg/coroutines/co-await-syntax-03-auto.C: New test.
* g++.dg/coroutines/co-await-syntax-04-ctor-dtor.C: New test.
* g++.dg/coroutines/co-await-syntax-05-constexpr.C: New test.
* g++.dg/coroutines/co-await-syntax-06-main.C: New test.
* g++.dg/coroutines/co-await-syntax-07-varargs.C: New test.
* g++.dg/coroutines/co-await-syntax-08-lambda-auto.C: New test.
* g++.dg/coroutines/co-return-syntax-01-outside-fn.C: New test.
* g++.dg/coroutines/co-return-syntax-02-outside-fn.C: New test.
* g++.dg/coroutines/co-return-syntax-03-auto.C: New test.
* g++.dg/coroutines/co-return-syntax-04-ctor-dtor.C: New test.
* g++.dg/coroutines/co-return-syntax-05-constexpr-fn.C: New test.
* g++.dg/coroutines/co-return-syntax-06-main.C: New test.
* g++.dg/coroutines/co-return-syntax-07-vararg.C: New test.
* g++.dg/coroutines/co-return-syntax-08-bad-return.C: New test.
* g++.dg/coroutines/co-return-syntax-09-lambda-auto.C: New test.
* g++.dg/coroutines/co-yield-syntax-00-needs-expr.C: New test.
* g++.dg/coroutines/co-yield-syntax-01-outside-fn.C: New test.
* g++.dg/coroutines/co-yield-syntax-02-outside-fn.C: New test.
* g++.dg/coroutines/co-yield-syntax-03-auto.C: New test.
* g++.dg/coroutines/co-yield-syntax-04-ctor-dtor.C: New test.
* g++.dg/coroutines/co-yield-syntax-05-constexpr.C: New test.
* g++.dg/coroutines/co-yield-syntax-06-main.C: New test.
* g++.dg/coroutines/co-yield-syntax-07-varargs.C: New test.
* g++.dg/coroutines/co-yield-syntax-08-needs-expr.C: New test.
* g++.dg/coroutines/co-yield-syntax-09-lambda-auto.C: New test.
* g++.dg/coroutines/coro-builtins.C: New test.
* g++.dg/coroutines/coro-missing-gro.C: New test.
* g++.dg/coroutines/coro-missing-promise-yield.C: New test.
* g++.dg/coroutines/coro-missing-ret-value.C: New test.
* g++.dg/coroutines/coro-missing-ret-void.C: New test.
* g++.dg/coroutines/coro-missing-ueh-1.C: New test.
* g++.dg/coroutines/coro-missing-ueh-2.C: New test.
* g++.dg/coroutines/coro-missing-ueh-3.C: New test.
* g++.dg/coroutines/coro-missing-ueh.h: New test.
* g++.dg/coroutines/coro-pre-proc.C: New test.
* g++.dg/coroutines/coro.h: New file.
* g++.dg/coroutines/coro1-ret-int-yield-int.h: New file.
* g++.dg/coroutines/coroutines.exp: New file.
* g++.dg/coroutines/torture/alloc-00-gro-on-alloc-fail.C: New test.
* g++.dg/coroutines/torture/alloc-01-overload-newdel.C: New test.
* g++.dg/coroutines/torture/call-00-co-aw-arg.C: New test.
* g++.dg/coroutines/torture/call-01-multiple-co-aw.C: New test.
* g++.dg/coroutines/torture/call-02-temp-co-aw.C: New test.
* g++.dg/coroutines/torture/call-03-temp-ref-co-aw.C: New test.
* g++.dg/coroutines/torture/class-00-co-ret.C: New test.
* g++.dg/coroutines/torture/class-01-co-ret-parm.C: New test.
* g++.dg/coroutines/torture/class-02-templ-parm.C: New test.
* g++.dg/coroutines/torture/class-03-operator-templ-parm.C: New test.
* g++.dg/coroutines/torture/class-04-lambda-1.C: New test.
* g++.dg/coroutines/torture/class-05-lambda-capture-copy-local.C: New test.
* g++.dg/coroutines/torture/class-06-lambda-capture-ref.C: New test.
* g++.dg/coroutines/torture/co-await-00-trivial.C: New test.
* g++.dg/coroutines/torture/co-await-01-with-value.C: New test.
* g++.dg/coroutines/torture/co-await-02-xform.C: New test.
* g++.dg/coroutines/torture/co-await-03-rhs-op.C: New test.
* g++.dg/coroutines/torture/co-await-04-control-flow.C: New test.
* g++.dg/coroutines/torture/co-await-05-loop.C: New test.
* g++.dg/coroutines/torture/co-await-06-ovl.C: New test.
* g++.dg/coroutines/torture/co-await-07-tmpl.C: New test.
* g++.dg/coroutines/torture/co-await-08-cascade.C: New test.
* g++.dg/coroutines/torture/co-await-09-pair.C: New test.
* g++.dg/coroutines/torture/co-await-10-template-fn-arg.C: New test.
* g++.dg/coroutines/torture/co-await-11-forwarding.C: New test.
* g++.dg/coroutines/torture/co-await-12-operator-2.C: New test.
* g++.dg/coroutines/torture/co-await-13-return-ref.C: New test.
* g++.dg/coroutines/torture/co-ret-00-void-return-is-ready.C: New test.
* g++.dg/coroutines/torture/co-ret-01-void-return-is-suspend.C: New test.
* g++.dg/coroutines/torture/co-ret-03-different-GRO-type.C: New test.
* g++.dg/coroutines/torture/co-ret-04-GRO-nontriv.C: New test.
* g++.dg/coroutines/torture/co-ret-05-return-value.C: New test.
* g++.dg/coroutines/torture/co-ret-06-template-promise-val-1.C: New test.
* g++.dg/coroutines/torture/co-ret-07-void-cast-expr.C: New test.
* g++.dg/coroutines/torture/co-ret-08-template-cast-ret.C: New test.
* g++.dg/coroutines/torture/co-ret-09-bool-await-susp.C: New test.
* g++.dg/coroutines/torture/co-ret-10-expression-evaluates-once.C: New test.
* g++.dg/coroutines/torture/co-ret-11-co-ret-co-await.C: New test.
* g++.dg/coroutines/torture/co-ret-12-co-ret-fun-co-await.C: New test.
* g++.dg/coroutines/torture/co-ret-13-template-2.C: New test.
* g++.dg/coroutines/torture/co-ret-14-template-3.C: New test.
* g++.dg/coroutines/torture/co-yield-00-triv.C: New test.
* g++.dg/coroutines/torture/co-yield-01-multi.C: New test.
* g++.dg/coroutines/torture/co-yield-02-loop.C: New test.
* g++.dg/coroutines/torture/co-yield-03-tmpl.C: New test.
* g++.dg/coroutines/torture/co-yield-04-complex-local-state.C: New test.
* g++.dg/coroutines/torture/co-yield-05-co-aw.C: New test.
* g++.dg/coroutines/torture/co-yield-06-fun-parm.C: New test.
* g++.dg/coroutines/torture/co-yield-07-template-fn-param.C: New test.
* g++.dg/coroutines/torture/co-yield-08-more-refs.C: New test.
* g++.dg/coroutines/torture/co-yield-09-more-templ-refs.C: New test.
* g++.dg/coroutines/torture/coro-torture.exp: New file.
* g++.dg/coroutines/torture/exceptions-test-0.C: New test.
* g++.dg/coroutines/torture/func-params-00.C: New test.
* g++.dg/coroutines/torture/func-params-01.C: New test.
* g++.dg/coroutines/torture/func-params-02.C: New test.
* g++.dg/coroutines/torture/func-params-03.C: New test.
* g++.dg/coroutines/torture/func-params-04.C: New test.
* g++.dg/coroutines/torture/func-params-05.C: New test.
* g++.dg/coroutines/torture/func-params-06.C: New test.
* g++.dg/coroutines/torture/lambda-00-co-ret.C: New test.
* g++.dg/coroutines/torture/lambda-01-co-ret-parm.C: New test.
* g++.dg/coroutines/torture/lambda-02-co-yield-values.C: New test.
* g++.dg/coroutines/torture/lambda-03-auto-parm-1.C: New test.
* g++.dg/coroutines/torture/lambda-04-templ-parm.C: New test.
* g++.dg/coroutines/torture/lambda-05-capture-copy-local.C: New test.
* g++.dg/coroutines/torture/lambda-06-multi-capture.C: New test.
* g++.dg/coroutines/torture/lambda-07-multi-yield.C: New test.
* g++.dg/coroutines/torture/lambda-08-co-ret-parm-ref.C: New test.
* g++.dg/coroutines/torture/local-var-0.C: New test.
* g++.dg/coroutines/torture/local-var-1.C: New test.
* g++.dg/coroutines/torture/local-var-2.C: New test.
* g++.dg/coroutines/torture/local-var-3.C: New test.
* g++.dg/coroutines/torture/local-var-4.C: New test.
* g++.dg/coroutines/torture/mid-suspend-destruction-0.C: New test.
* g++.dg/coroutines/torture/pr92933.C: New test.
Jakub Jelinek [Sat, 18 Jan 2020 08:48:48 +0000 (09:48 +0100)]
arm: Remove yet another unused variable.
Bootstrap found yet another unused variable:
../../gcc/config/arm/vfp.md:1651:17: warning: unused variable 'regname' [-Wunused-variable]
2020-01-18 Jakub Jelinek <jakub@redhat.com>
* config/arm/vfp.md (*clear_vfp_multiple): Remove unused variable.
Jakub Jelinek [Sat, 18 Jan 2020 08:41:59 +0000 (09:41 +0100)]
arm: fix rtl checking bootstrap (PR target/93312)
As reported in PR93312, the:
> > > > > > * config/arm/arm.c (clear_operation_p): New function.
change broke RTL checking bootstrap.
On the testcase from the PR (which is distilled from libgcc2.c, so I think
we don't need to add it into testsuite) we ICE because SET_DEST (elt) is
not a REG, but SUBREG. The code uses REGNO on it, which is invalid, but
only stores it into a variable, then performs REG_P (reg) check,
determines it is not a REG and bails early.
The following patch just moves the regno variable initialization after that
check, it isn't used in between. And, as a small optimization, because
reg doesn't change, doesn't use REGNO (reg) a second time to set last_regno.
2020-01-18 Jakub Jelinek <jakub@redhat.com>
PR target/93312
* config/arm/arm.c (clear_operation_p): Don't use REGNO until
after checking the argument is a REG. Don't use REGNO (reg)
again to set last_regno, reuse regno variable instead.
Jerry DeLisle [Sat, 18 Jan 2020 03:36:03 +0000 (19:36 -0800)]
PR93234 INQUIRE on pre-assigned files of ROUND and SIGN properties
PR libfortran/93234
* io/unit.c (set_internal_unit): Set round and sign flags
correctly.
* gfortran.dg/inquire_pre.f90: New test.
GCC Administrator [Sat, 18 Jan 2020 00:16:30 +0000 (00:16 +0000)]
Daily bump.
David Malcolm [Thu, 16 Jan 2020 14:46:30 +0000 (09:46 -0500)]
analyzer: prevent ICE on isnan (PR 93290)
PR analyzer/93290 reports an ICE on calls to isnan().
The root cause is that an UNORDERED_EXPR is passed
to region_model::eval_condition_without_cm, and there's
a stray gcc_unreachable () in the case where we're comparing
an svalue against itself.
I attempted a more involved patch that properly handled NaN in general
but it seems I've baked the assumption of reflexivity too deeply into
the constraint_manager code.
For now, this patch avoids the ICE and documents the limitation.
gcc/analyzer/ChangeLog:
PR analyzer/93290
* region-model.cc (region_model::eval_condition_without_cm): Avoid
gcc_unreachable for unexpected operations for the case where
we're comparing an svalue against itself.
gcc/ChangeLog
* doc/analyzer.texi (Limitations): Add note about NaN.
gcc/testsuite/ChangeLog:
PR analyzer/93290
* gcc.dg/analyzer/pr93290.c: New test.
Jerry DeLisle [Fri, 17 Jan 2020 19:26:10 +0000 (11:26 -0800)]
PR90374 Zero width format specifiers.
PR libfortran/90374
* io/format.c (parse_format_list): Zero width not allowed with
FMT_D.
* io/write_float.def (build_float_string): Include range of
higher exponent values that require wider width.
Paolo Carlini [Fri, 17 Jan 2020 19:03:58 +0000 (20:03 +0100)]
Add testcase of PR c++/92542, already fixed.
PR c++/92542
* g++.dg/pr92542.C: New.
Paolo Carlini [Fri, 17 Jan 2020 19:02:21 +0000 (20:02 +0100)]
Add testcase of PR c++/92542, already fixed.
PR c++/92542
* g++.dg/pr92542.C: New.
Mihail Ionescu [Fri, 17 Jan 2020 18:14:54 +0000 (18:14 +0000)]
[GCC/ARM, 2/2] Add support for ASRL(imm), LSLL(imm) and LSRL(imm) instructions for Armv8.1-M Mainline
This patch is adding the following instructions:
ASRL (imm)
LSLL (imm)
LSRL (imm)
*** gcc/ChangeLog ***
2020-01-17 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
Sudakshina Das <sudi.das@arm.com>
* config/arm/arm.md (ashldi3): Generate thumb2_lsll for both reg
and valid immediate.
(ashrdi3): Generate thumb2_asrl for both reg and valid immediate.
(lshrdi3): Generate thumb2_lsrl for valid immediates.
* config/arm/constraints.md (Pg): New.
* config/arm/predicates.md (long_shift_imm): New.
(arm_reg_or_long_shift_imm): Likewise.
* config/arm/thumb2.md (thumb2_asrl): New immediate alternative.
(thumb2_lsll): Likewise.
(thumb2_lsrl): New.
*** gcc/testsuite/ChangeLog ***
2020-01-17 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
Sudakshina Das <sudi.das@arm.com>
* gcc.target/arm/armv8_1m-shift-imm_1.c: New test.
Mihail Ionescu [Fri, 17 Jan 2020 17:56:41 +0000 (17:56 +0000)]
[GCC/ARM, 1/2] Add support for ASRL(reg) and LSLL(reg) instructions for Armv8.1-M Mainline
This patch is adding the following instructions:
ASRL (reg)
LSLL (reg)
*** gcc/ChangeLog ***
2020-01-17 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
Sudakshina Das <sudi.das@arm.com>
* config/arm/arm.md (ashldi3): Generate thumb2_lsll for TARGET_HAVE_MVE.
(ashrdi3): Generate thumb2_asrl for TARGET_HAVE_MVE.
* config/arm/arm.c (arm_hard_regno_mode_ok): Allocate even odd
register pairs for doubleword quantities for ARMv8.1M-Mainline.
* config/arm/thumb2.md (thumb2_asrl): New.
(thumb2_lsll): Likewise.
2020-01-17 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
Sudakshina Das <sudi.das@arm.com>
* gcc.target/arm/armv8_1m-shift-reg_1.c: New test.
Jakub Jelinek [Fri, 17 Jan 2020 18:45:35 +0000 (19:45 +0100)]
Fix up ChangeLog.
Jakub Jelinek [Fri, 17 Jan 2020 18:41:42 +0000 (19:41 +0100)]
arm: Unbreak bootstrap
2020-01-17 Jakub Jelinek <jakub@redhat.com>
* config/arm/arm.c (cmse_nonsecure_call_inline_register_clear): Remove
unused variable.
Andrew Stubbs [Fri, 17 Jan 2020 14:46:59 +0000 (14:46 +0000)]
Rename acc_device_gcn to acc_device_radeon
2020-01-17 Andrew Stubbs <ams@codesourcery.com>
libgomp/
* config/accel/openacc.f90 (openacc_kinds): Rename acc_device_gcn to
acc_device_radeon.
(openacc): Likewise.
* openacc.f90 (openacc_kinds): Likewise.
(openacc): Likewise.
* openacc.h (acc_device_t): Likewise.
* openacc_lib.h: Likewise.
* testsuite/lib/libgomp.exp
(check_effective_target_openacc_amdgcn_accel_present): Likewise.
* testsuite/libgomp.oacc-c-c++-common/acc_prof-init-1.c
(cb_compute_construct_end): Likewise.
* testsuite/libgomp.oacc-c-c++-common/acc_prof-kernels-1.c
(cb_enqueue_launch_start): Likewise.
* testsuite/libgomp.oacc-c-c++-common/acc_prof-parallel-1.c
(cb_enter_data_end): Likewise.
(cb_exit_data_start): Likewise.
(cb_exit_data_end): Likewise.
(cb_compute_construct_end): Likewise.
(cb_enqueue_launch_start): Likewise.
(cb_enqueue_launch_end): Likewise.
* testsuite/libgomp.oacc-c-c++-common/asyncwait-nop-1.c
(main): Likewise.
Jonathan Wakely [Fri, 17 Jan 2020 15:49:02 +0000 (15:49 +0000)]
libstdc++: Fix freestanding build PR 92376)
In a freestanding library we don't install the <pstl/pstl_config.h>
header, so don't try to include it unless it exists.
Explicitly declare aligned alloc functions for freestanding, because
<cstdlib> doesn't declare them.
PR libstdc++/92376
* include/bits/c++config: Only do PSTL config when the header is
present, to fix freestanding.
* libsupc++/new_opa.cc [!_GLIBCXX_HOSTED]: Declare allocation
functions if they were detected by configure.
Alexander Monakov [Fri, 17 Jan 2020 15:15:44 +0000 (18:15 +0300)]
gdbinit.in: make shorthands accept an explicit argument
Make gdb shorthands such as 'pr' accept an argument, in addition to
implictly taking register '$' as the thing to examine.
The 'eval ...' one-liners are used to workaround GDB bug #22466.
* gdbinit.in (help-gcc-hooks): New command.
(pp, pr, prl, pt, pct, pgg, pgq, pgs, pge, pmz, ptc, pdn, ptn, pdd, prc,
pi, pbm, pel, trt): Take $arg0 instead of $ if supplied. Update
documentation.
Matthew Malcomson [Fri, 17 Jan 2020 15:08:21 +0000 (15:08 +0000)]
[AArch64] [Obvious] Correct pattern target requirement
Had mistakenly used a target macro that was not defined and not the
relevant one instead of the macro that should be used.
TARGET_ARMV8_6 is not defined, and also not the macro we want to check.
Instead check TARGET_F64MM.
gcc/ChangeLog:
2020-01-17 Matthew Malcomson <matthew.malcomson@arm.com>
* config/aarch64/aarch64-sve.md (@aarch64_sve_ld1ro<mode>): Use
the correct target macro.
Jonathan Wakely [Fri, 10 Jan 2020 13:04:09 +0000 (13:04 +0000)]
Fix g++ testsuite failure caused by std::is_pod deprecation
PR testsuite/93227
* g++.dg/cpp0x/std-layout1.C: Use -Wno-deprecated-declarations for
C++20, due to std::is_pod being deprecated.
Matthew Malcomson [Fri, 17 Jan 2020 11:50:54 +0000 (11:50 +0000)]
[AArch64] [SVE] Implement svld1ro intrinsic.
We take no action to ensure the SVE vector size is large enough. It is
left to the user to check that before compiling this intrinsic or before
running such a program on a machine.
The main difference between ld1ro and ld1rq is in the allowed offsets,
the implementation difference is that ld1ro is implemented using integer
modes since there are no pre-existing vector modes of the relevant size.
Adding new vector modes simply for this intrinsic seems to make the code
less tidy.
Specifications can be found under the "Arm C Language Extensions for
Scalable Vector Extension" title at
https://developer.arm.com/architectures/system-architectures/software-standards/acle
gcc/ChangeLog:
2020-01-17 Matthew Malcomson <matthew.malcomson@arm.com>
* config/aarch64/aarch64-protos.h
(aarch64_sve_ld1ro_operand_p): New.
* config/aarch64/aarch64-sve-builtins-base.cc
(class load_replicate): New.
(class svld1ro_impl): New.
(class svld1rq_impl): Change to inherit from load_replicate.
(svld1ro): New sve intrinsic function base.
* config/aarch64/aarch64-sve-builtins-base.def (svld1ro):
New DEF_SVE_FUNCTION.
* config/aarch64/aarch64-sve-builtins-base.h
(svld1ro): New decl.
* config/aarch64/aarch64-sve-builtins.cc
(function_expander::add_mem_operand): Modify assert to allow
OImode.
* config/aarch64/aarch64-sve.md (@aarch64_sve_ld1ro<mode>): New
pattern.
* config/aarch64/aarch64.c
(aarch64_sve_ld1rq_operand_p): Implement in terms of ...
(aarch64_sve_ld1rq_ld1ro_operand_p): This.
(aarch64_sve_ld1ro_operand_p): New.
* config/aarch64/aarch64.md (UNSPEC_LD1RO): New unspec.
* config/aarch64/constraints.md (UOb,UOh,UOw,UOd): New.
* config/aarch64/predicates.md
(aarch64_sve_ld1ro_operand_{b,h,w,d}): New.
gcc/testsuite/ChangeLog:
2020-01-17 Matthew Malcomson <matthew.malcomson@arm.com>
* gcc.target/aarch64/sve/acle/asm/ld1ro_f16.c: New test.
* gcc.target/aarch64/sve/acle/asm/ld1ro_f32.c: New test.
* gcc.target/aarch64/sve/acle/asm/ld1ro_f64.c: New test.
* gcc.target/aarch64/sve/acle/asm/ld1ro_s16.c: New test.
* gcc.target/aarch64/sve/acle/asm/ld1ro_s32.c: New test.
* gcc.target/aarch64/sve/acle/asm/ld1ro_s64.c: New test.
* gcc.target/aarch64/sve/acle/asm/ld1ro_s8.c: New test.
* gcc.target/aarch64/sve/acle/asm/ld1ro_u16.c: New test.
* gcc.target/aarch64/sve/acle/asm/ld1ro_u32.c: New test.
* gcc.target/aarch64/sve/acle/asm/ld1ro_u64.c: New test.
* gcc.target/aarch64/sve/acle/asm/ld1ro_u8.c: New test.
Matthew Malcomson [Fri, 17 Jan 2020 11:22:28 +0000 (11:22 +0000)]
[AArch64] Enable CLI for Armv8.6-A f64mm
This patch is necessary for sve-ld1ro intrinsic I posted in
https://gcc.gnu.org/ml/gcc-patches/2020-01/msg00466.html .
I had mistakenly thought this option was already enabled upstream.
This provides the option +f64mm, that turns on the 64 bit floating point
matrix multiply extension. This extension is only available for
AArch64. Turning on this extension also turns on the SVE extension.
This extension is optional and only available at Armv8.2-A and onward.
We also add the ACLE defined macro for this extension.
gcc/ChangeLog:
2020-01-17 Matthew Malcomson <matthew.malcomson@arm.com>
* config/aarch64/aarch64-c.c (_ARM_FEATURE_MATMUL_FLOAT64):
Introduce this ACLE specified predefined macro.
* config/aarch64/aarch64-option-extensions.def (f64mm): New.
(fp): Disabling this disables f64mm.
(simd): Disabling this disables f64mm.
(fp16): Disabling this disables f64mm.
(sve): Disabling this disables f64mm.
* config/aarch64/aarch64.h (AARCH64_FL_F64MM): New.
(AARCH64_ISA_F64MM): New.
(TARGET_F64MM): New.
* doc/invoke.texi (f64mm): Document new option.
gcc/testsuite/ChangeLog:
2020-01-17 Matthew Malcomson <matthew.malcomson@arm.com>
* gcc.target/aarch64/pragma_cpp_predefs_2.c: Check for f64mm
predef.
Wilco Dijkstra [Fri, 17 Jan 2020 14:27:14 +0000 (14:27 +0000)]
[AArch64] Enable compare branch fusion
Enable the most basic form of compare-branch fusion since various CPUs
support it. This has no measurable effect on cores which don't support
branch fusion, but increases fusion opportunities on cores which do.
gcc/
* config/aarch64/aarch64.c (generic_tunings): Add branch fusion.
(neoversen1_tunings): Likewise.