manual: faq.txt: rework and update

Also rename faq.txt -> faq-troubleshooting.txt

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: add make-tips.txt

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: add prerequisite.txt

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: adding-package-directory.txt: update, cleanup and typo fixes

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: update rebuilding-packages.txt

- update "Understanding how to rebuild packages" section
- add "Understanding when a full rebuild is necessary" section

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: customize-rootfs.txt: refactoring, misc. fixes and update

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: rework using.txt and update common-usage.txt

Consider the second chapter: "starting-up", as a tutorial.
Assuming that, using.txt only contains the very first commands used to get
configure and build its very first target system.

So, the following subsection from using.txt have been to common-usage.txt:
- Offline builds
- Building out-of-tree
- Environment variables

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: rework introduction.txt and add embedded-basics.txt

Split and rephrasing of introduction.txt.

Cross-toolchain explainations moved from introduction.txt into
embedded-basics.txt.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: rework the whole documentation stub

The new skeleton of the manual as it has been thought:
1.  About Buildroot:
     Presentation of Buildroot
2.  Starting up:
     Everything to quickly and easily start working with Buildroot
3.  Working with Buildroot
     Basics to make your work fitting your needs
4.  Troubleshooting
5.  Going further in Buildroot's innards
     Explaination of how buildroot is organised, how it works, etc
6.  Developer Guidelines
7.  Getting involved
8.  Contibuting to Buildroot
9.  Legal notice
10. Appendix

It is easy to distinguish two parts in this plan:
- Sections 1 to 4 mainly address people starting with Buildroot
- Sections 5 to 10 are more focused on how to develop Buildroot itself

Most of the existing sections have just been moved in the hierarchy,
few were split and dispatch in, what i think was the relevant section,
and numerous others have been created.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: set toc depth to 4 for html outputs

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: make clean target consistent with others in buildroot

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qemu/mips64-malta: update to use kernel 3.6.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qemu/mips{el}-malta: update to use kernel 3.6.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qemu/microblaze: update to use kernel 3.6.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qemu/arm-versatile: update to use kernel 3.6.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qemu/arm-vexpress: update to use kernel 3.6.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qemu/ppc-g3beige: update to use kernel 3.6.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qemu/sh4-r2d: update to use kernel 3.2.33

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qemu/ppc-mpc8544ds: update to use kernel 3.6.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qemu/sparc: update to use kernel 3.6.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qemu/x86_64: update to use kernel 3.6.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qemu/x86: update to use kernel 3.6.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

python-nfc: bump version

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libnfc-llcp: bump version

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libnfc: bump version

Note that libnfc has also switched from Subversion to Git.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

grantlee: fix -lpthread build error

Fixing linking time error with certain toolchains. The issue caused by a missing explicit linking to
libpthread. The failed buildlog:
Linking CXX executable testgenerictypes_exec
/home/buildroot12git/output/host/usr/lib/gcc/arm-buildroot-linux-uclibcgnueabi/4.6.3/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/buildroot12git/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libQtCore.so: undefined reference to symbol 'pthread_cancel'
/home/buildroot12git/output/host/usr/lib/gcc/arm-buildroot-linux-uclibcgnueabi/4.6.3/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: note: 'pthread_cancel' is defined in DSO /home/buildroot12git/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/lib/libpthread.so.0 so try adding it to the linker command line
/home/buildroot12git/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/lib/libpthread.so.0: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
make[3]: *** [templates/tests/testgenerictypes_exec] Error 1
make[3]: Leaving directory `/home/buildroot12git/output/build/grantlee-0.2.0'
make[2]: *** [templates/tests/CMakeFiles/testgenerictypes_exec.dir/all] Error 2
make[2]: Leaving directory `/home/buildroot12git/output/build/grantlee-0.2.0'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/home/buildroot12git/output/build/grantlee-0.2.0'
make: *** [/home/buildroot12git/output/build/grantlee-0.2.0/.stamp_built] Error

Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

support/gnuconfig: update config.{guess, sub} to a newer version

We need more recent versions of config.guess and config.sub in order
to support the aarch64 architecture. Otherwise, all autoconf packages
fail to build with failures like:

  http://autobuild.buildroot.org/results/abcdbe1aaf1c203c82dc3e4ec8c002b9b9e550e0/build-end.log

We take this opportunity to turn the config.* patches into proper Git
patches, and note which Git commit of the config.git repository we
used as the original source.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

tremor: force ARM mode when building to avoid Thumb2 build problems

Fixes:

  http://autobuild.buildroot.org/results/502b7d3f29d7982d56de2ae4a0b943315e04713b/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

arch: Config.in string configuration options must be quoted

Suggested by Yann E. Morin.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xtensa: support configurable processor configurations

Xtensa is a configurable processor architecture, which allows to define
additional instructions and registers. The required variant specific
information for the toolchain is delivered in an 'overlay' file, which
needs to be 'untarred' to the corresponding directories after the
source is installed and patched.
This patch provides support for binutils, gcc, and gdb with a very
limited changes to the build scripts. These additions are only executed
for the Xtensa architecture and have no effect on other architectures.

[Thomas: rebased on top of the 'arch: improve definition of gcc mtune,
mcpu, etc.' patch, and changed 'Target ABI' to 'Target Architecture
Variant'].

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xtensa: add support for the Xtensa architecture

The Xtensa architecture had been removed because it required special
handling and depended on additional directories and files that became
obsolete over time. This change is more aligned to other architectures.

[Thomas: rebased on top of the "arch: improve definition of gcc mtune,
mcpu, etc." patch].

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

uClibc: update uClibc-snapshot.config to recent uClibcs

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

uClibc: remove useless linuxthreads-errno-fix patch

This patch has since a long time been merged upstream in uClibc, so it
cannot apply on any of the recent uClibc snapshots.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

arch: improve definition of gcc mtune, mcpu, etc.

As suggested by Yann E. Morin, there is a better way than our current
big Config.in.common to define the gcc mtune, mcpu, march,
etc. values. We can split the setting of those values in each
architecture file, which makes a lot more sense.

Therefore, the Config.in file now creates empty kconfig variables
BR2_ARCH, BR2_ENDIAN, BR2_GCC_TARGET_TUNE, BR2_GCC_TARGET_ARCH,
BR2_GCC_TARGET_ABI and BR2_GCC_TARGET_CPU. The values of those
variables are set by the individual Config.in.<arch> files. This is
possible because such files are now only conditionally included
depending on the top-level architecture that has been selected.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lua: refactor without useless define's

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lua: remove 3 sub-options, always install all

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lua-msgpack-native: new package v2

[Peter: reformat Config.in to fit 80-col]
Signed-off-by: Wojciech M. Zabolotny <wzab01@gmail.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

vala: bump version

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Revert "auto{conf, make}: only make available on archs supported by qemu"

Since perl no longer requires host-qemu, autoconf and automake work
again on the architectures that are not supported by host-qemu.

This reverts commit c65d92e8e2767b09aaee6b717cbd9b66f88ea39c.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

rpcbind: fix build on toolchains without IPv6 support

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libnetfilter_queue: does not build without IPv6 support

Fixes the following build failure:

extra/checksum.c:16:25: fatal error: netinet/ip6.h: No such file or directory
compilation terminated.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

rpcbind: allow build without NSS support

uClibc doesn't provide NSS support, so we shouldn't try to include nss
related headers or call nss related functions.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

rpcbind: convert to git patch

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

quota: allow usage of getrpcbynumber() instead of getrpcbynumber_r()

libtirpc does not implement the reentrant function getrpcbynumber_r(),
so allow quota to use the non-reentrant version getrpcbynumber(). This
should not be a problem as quota tools are not multi-threaded.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

nfs-utils: add patches to allow compilation against libtirpc

libtirpc does not implement the reentrant function getrpcbynumber_r(),
so allow nfs-utils to use the non-reentrant version
getrpcbynumber(). This should not be a problem as nfs-utils tools are
not multi-threaded.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

nfs-utils: reformat patch set as git patches

As we will need to add more patches to nfs-utils, we need a correct
ordering when applying patches. Therefore, reformat the patches to use
a git format and git naming.

The nfs-utils-dont-mix-flags.patch is no longer needed as it was
patching Makefile.in files that were being regenerated due to the
package having _AUTORECONF = YES. The Makefile.in are properly
regenerated thanks to the nfs-utils-0002-Patch-taken-from-Gentoo.patch
patch.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libtirpc: handle the case where uClibc may have RPC support

When uClibc has RPC support, it is not needed to define the 'struct
rpcent' structure.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libtirpc: add patches to fix a number of issues

libtirpc-0005-rpcent-mark-getrpcbyname-name-argument-as-const-char.patch
fixes build failures like
http://autobuild.buildroot.org/results/7a3a751fe02c639ca75c575ca7fe20a72372b8d6/build-end.log.

libtirpc-0006-rpcent-remove-prototypes-of-reentrant-variants.patch
ensures that functions not implemented by libtirpc are not described
in a header file. It also allows to remove those prototypes that were
not matching the functions available in glibc or uClibc, causing
mismatch in prototypes.

libtirpc-0007-doc-Makefile.am-fix-out-of-tree-installation.patch is a
minor fix.

The following patches (8 to 9) allow libtirpc to provide sufficient
things to be able to build rpcbind on top of it.

All these patches have been submitted upstream on the libtirpc-devel@
mailing list.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libtirpc: remove patch numbers from patch titles

The patch numbers in [PATCH x/y] are quite useless within the context
of Buildroot, and generate noise when patches are re-ordered.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

conntrack-tools: do not depend on BR2_INET_RPC and use libtirpc when available

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

iso9660 fs: use cpio initrd instead of ext2

The ext2 initrd is pretty broken, because it requires an additional
root=/dev/ram0 command line parameter, and a /init to mount
devtmps that isn't there in out ext2 rootfs.  So just use a cpio
instead.

Note that there is no check if the kernel supports initramfs or the
selected compression method.

Also removed a bit of dead code in iso9660.mk.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qextserialport: don't require Qt GUI module

Fixes e.g.
http://autobuild.buildroot.net/results/e80ae76fa21f87bef10e08c7452b796dc0986ff2/

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

legal-info: quote csv file contents, so commas can be used

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xenomai: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

which: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

valgrind: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

util-linux: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

usbutils: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

tcpdump: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

strace: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

python: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

procps: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

popt: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

pciutils: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

openntpd: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

module-init-tools: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

mii-diag: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lsof: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

logrotate: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lockfile-progs: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lm-sensors: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libtool: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

liblockfile: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libffi: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

file: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ethtool: fix license info variable

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

e2fsprogs: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

dropbear: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

dmalloc: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

binutils: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

bash: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ncurses: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

autoconf: add license info

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

bluez-utils: disable on avr32

The bluez-utils package does not build for the avr32 architecture; this
results in autobuilder failures such as the following.

  http://autobuild.buildroot.net/results/d737d1220d7566289eee802fd580a49d8c456c97/build-end.log

The underlying problem is with the <sys/epoll.h> header provided by the
antiquated avr32 toolchain; this header lacks definitions for
epoll_create1() and EPOLL_CLOEXEC.

This patch disables support for the bluez-utils package on the avr32
architecture.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kexec: disable on avr32

kexec does not support the avr32 architecture; this results in autobuilder
failures such as the following.

  http://autobuild.buildroot.net/results/5f5e91c3eb622bce88402a9afc8a3e7bd5007136/build-end.log

This patch disables support for the kexec package on the avr32 architecture.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

CHANGES: update with recent changes

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

perl: build with perlcross instead of qemu

The perlcross project makes it possible to properly cross-compile
perl.  It creates a host-miniperl that is configured for the target
and uses that to cross-compile the perl modules.

Unfortunately there are still a few hacks needed to make it work.
Proper fixes can be developed and upstreamed later.

Since there is no longer a dependency on qemu, it works on all
architectures again.

Also removed some config options:
- BR2_PACKAGE_PERL_CUSTOM_INSTALL just allows a selection of modules;
this can also be encoded by an empty BR2_PACKAGE_PERL_MODULES.
- BR2_PACKAGE_PERL_DB_FILE and BR2_PACKAGE_PERL_GDBM_FILE can be
derived automatically from the package configs.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

add new package grantlee

[Peter: sort alphabetically in Config.in]
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xlib_libX11: fix compilation of makekeys

xlib_libX11 builds a makekeys executable for the host, but uses the
targets X11_CFLAGS. This leads to build failures like
http://autobuild.buildroot.net/results/411eb3aefea859a7e31986a44acd50b475f174cb/

This problem was introduced by the version bump, because then also
the AUTORECONF was removed so the existing fix didn't work anymore.

As a slightly cleaner solution, just remove X11_CFLAGS from the
Makefile.  We know we don't need it, because the X11 stuff is in
$(HOST_DIR)/usr/include which is already in HOST_CFLAGS.

[Peter: reword comments]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qextserialport : fix download and bump version

Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libgcrypt: add license information

Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ntp: add license information

Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

at91bootstrap: fix overlap linker issue

The linker script of the at91bootstrap package has to be modified when
built from gcc-4.6.x version. Indeed a section named text.startup is
created and has to be added into the text section.

Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lcdproc: bump version to 0.5.6

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kmod: don't build documentation if not needed

No sense in building it if we throw it away in target-finalize anyway.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lm-sensors: bump to 3.3.3

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kmod: bump to 11

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Add python3 package

[Peter: s/python/python3/]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

TARGET_CONFIGURE_OPTS: pass READELF

Give the path to the realdelf binary for the target, similar to how we
do for the other tools.

[Peter: reworded]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libmbus : bump version to 0.8

This release contains many improvements bug fixes, and major new features and
support for float point numbers and support for multi-telegram communication...

[Peter: also drop autoreconf]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>