mesa.git
14 years agor100: add additional blit formats
Alex Deucher [Wed, 10 Mar 2010 09:19:42 +0000 (04:19 -0500)]
r100: add additional blit formats

14 years agoradeon/r200/r600: enable HW accelerated gl(Read/Copy/Draw)Pixels
Alex Deucher [Wed, 10 Mar 2010 00:44:23 +0000 (19:44 -0500)]
radeon/r200/r600: enable HW accelerated gl(Read/Copy/Draw)Pixels

14 years agoglapi: fix bug with tls and relocs
George Sapountzis [Tue, 9 Mar 2010 22:43:01 +0000 (00:43 +0200)]
glapi: fix bug with tls and relocs

add_dispatch (driver) and maybe get_proc_address (client) may be called before
set_dispatch is called, which results in generate_entrypoint using an unreloced
function template.

14 years agoglapi: these two should be ok for add_dispatch ...
George Sapountzis [Mon, 8 Mar 2010 01:10:30 +0000 (03:10 +0200)]
glapi: these two should be ok for add_dispatch ...

- a function cannot be both static and extension, right ?

- we should be setting the offset only if not already set, right ?

14 years agoglapi: comments for _glapi_add_dispatch
George Sapountzis [Mon, 8 Mar 2010 00:53:57 +0000 (02:53 +0200)]
glapi: comments for _glapi_add_dispatch

14 years agoglapi: minor cosmetic for _glapi_add_dispatch
George Sapountzis [Sun, 7 Mar 2010 23:58:59 +0000 (01:58 +0200)]
glapi: minor cosmetic for _glapi_add_dispatch

14 years agoglapi: add function set_entry_info
George Sapountzis [Sun, 7 Mar 2010 23:55:10 +0000 (01:55 +0200)]
glapi: add function set_entry_info

14 years agoglapi: parameter checking, failure paths, ... for add_function_name
George Sapountzis [Sun, 7 Mar 2010 23:40:14 +0000 (01:40 +0200)]
glapi: parameter checking, failure paths, ... for add_function_name

14 years agoglapi: cosmetic for _glapi_add_dispatch
George Sapountzis [Sun, 7 Mar 2010 23:26:01 +0000 (01:26 +0200)]
glapi: cosmetic for _glapi_add_dispatch

- static vs. extension
- indent
- s/new_offset/static_offset/
- ...

14 years agoglapi: use get_extension_proc in _glapi_add_dispatch
George Sapountzis [Sun, 7 Mar 2010 23:18:31 +0000 (01:18 +0200)]
glapi: use get_extension_proc in _glapi_add_dispatch

14 years agoglapi: cosmetic for functions for static table
George Sapountzis [Sat, 6 Mar 2010 19:19:45 +0000 (21:19 +0200)]
glapi: cosmetic for functions for static table

make similar to functions for extensions table

14 years agoglapi: add function to find extension by name
George Sapountzis [Sun, 7 Mar 2010 21:04:52 +0000 (23:04 +0200)]
glapi: add function to find extension by name

14 years agoglapi: functions for extensions table similar to static table
George Sapountzis [Sat, 6 Mar 2010 19:57:47 +0000 (21:57 +0200)]
glapi: functions for extensions table similar to static table

14 years agocell: handle NULL cso vertex_elements state object on bind
Roland Scheidegger [Wed, 10 Mar 2010 15:53:07 +0000 (16:53 +0100)]
cell: handle NULL cso vertex_elements state object on bind

drivers need to handle NULL cso vertex elements (and others) objects.
It is possible the cso code saves/restores NULL objects (if no normal
cso object was bound before this was invoked).
This led to segfaults (for example demos/cubemap) for apps which were using
things like creating mipmaps before drawing anything.

14 years agoi915g: Prevent NULL dereference.
Chia-I Wu [Wed, 10 Mar 2010 14:58:51 +0000 (22:58 +0800)]
i915g: Prevent NULL dereference.

bind_vertex_elements_state may be called with NULL velems.  Do nothing
if that is the case.

14 years agogallium: Do not mix winsys-drawable-handle and context-private.
Chia-I Wu [Wed, 10 Mar 2010 14:20:15 +0000 (22:20 +0800)]
gallium: Do not mix winsys-drawable-handle and context-private.

update_buffer should be called with context-private, not
winsys-drawable-handle.

14 years agosvga: Disable debug message.
Michal Krol [Wed, 10 Mar 2010 11:05:25 +0000 (12:05 +0100)]
svga: Disable debug message.

14 years agosvga: Check if vertex elements has been bound before using it.
Michal Krol [Wed, 10 Mar 2010 11:04:00 +0000 (12:04 +0100)]
svga: Check if vertex elements has been bound before using it.

14 years agosoftpipe: Prevent NULL dereference.
José Fonseca [Wed, 10 Mar 2010 12:24:03 +0000 (12:24 +0000)]
softpipe: Prevent NULL dereference.

14 years agodocs: Update new opengl32.dll target location.
José Fonseca [Wed, 10 Mar 2010 12:09:16 +0000 (12:09 +0000)]
docs: Update new opengl32.dll target location.

14 years agopython: Remove broken link hack.
José Fonseca [Wed, 10 Mar 2010 12:05:10 +0000 (12:05 +0000)]
python: Remove broken link hack.

14 years agopython: More build fixes.
José Fonseca [Wed, 10 Mar 2010 12:00:13 +0000 (12:00 +0000)]
python: More build fixes.

14 years agotrace: Make tr_public.h c++ friendly.
José Fonseca [Wed, 10 Mar 2010 11:52:20 +0000 (11:52 +0000)]
trace: Make tr_public.h c++ friendly.

14 years agotarget-helpers: remove swrast_xlib.c helper
Keith Whitwell [Wed, 10 Mar 2010 11:49:11 +0000 (11:49 +0000)]
target-helpers: remove swrast_xlib.c helper

This was a good idea, but ended up tying the build systems in knots.
We can revisit this later, in particular if we can put in place dummy
implementations of cell_create_screen(), llvmpipe_create_screen()
which just return NULL if the driver isn't available.

In the meantime, just duplicate this smallish function in the two
places it was being called.

14 years agows/xlib: remove dead lines
Keith Whitwell [Wed, 10 Mar 2010 11:13:03 +0000 (11:13 +0000)]
ws/xlib: remove dead lines

14 years agoscons: Fixup the libgl-gdi build.
José Fonseca [Wed, 10 Mar 2010 11:34:09 +0000 (11:34 +0000)]
scons: Fixup the libgl-gdi build.

14 years agopython: Handle the possibility that no driver is selected.
José Fonseca [Wed, 10 Mar 2010 10:56:51 +0000 (10:56 +0000)]
python: Handle the possibility that no driver is selected.

14 years agogallium: remove trace module injection from various state trackers
Keith Whitwell [Wed, 10 Mar 2010 10:43:00 +0000 (10:43 +0000)]
gallium: remove trace module injection from various state trackers

Components such as state trackers, drivers, etc, should be free to be
recombined in arbtrary ways to build driver stacks.  They should not
be reaching out and trying to build the stack themselves - this is now
expected to be handled by the "target" abstraction.

14 years agows/gdi: add include
Keith Whitwell [Wed, 10 Mar 2010 10:37:41 +0000 (10:37 +0000)]
ws/gdi: add include

14 years agotarget-helpers: helper for injecting common debug layers
Keith Whitwell [Wed, 10 Mar 2010 10:32:16 +0000 (10:32 +0000)]
target-helpers: helper for injecting common debug layers

Add a helper gallium_wrap_screen() for injecting the commonly
used extra layers into a gallium stack.  Currently that's just the
trace module and identity layer, but there could be more in the
future, eg. a validation layer.

14 years agopython: Fix up state tracker for sw api.
José Fonseca [Wed, 10 Mar 2010 10:34:29 +0000 (10:34 +0000)]
python: Fix up state tracker for sw api.

14 years agoRevert "r300-gallium: Skeleton for integrating into the python statetracker."
José Fonseca [Wed, 10 Mar 2010 10:00:08 +0000 (10:00 +0000)]
Revert "r300-gallium: Skeleton for integrating into the python statetracker."

This reverts commit 2d56d0839e6db0861131893d67fe23734800085a.

Never actually used.

14 years agost/wgl: add missing paramter
Keith Whitwell [Wed, 10 Mar 2010 09:52:25 +0000 (09:52 +0000)]
st/wgl: add missing paramter

14 years agotrace: include tr_public.h
Keith Whitwell [Wed, 10 Mar 2010 09:51:41 +0000 (09:51 +0000)]
trace: include tr_public.h

14 years agogallium: plumb winsys-drawable-handle through to state tracker
Keith Whitwell [Wed, 10 Mar 2010 09:22:02 +0000 (09:22 +0000)]
gallium: plumb winsys-drawable-handle through to state tracker

The state trackers need this value so that they can supply it
as the "void *" argument to flush_frontbuffer.

Fixes single-buffer rendering.

14 years agoMerge commit 'origin/master' into gallium-sw-api-2
Keith Whitwell [Wed, 10 Mar 2010 08:29:27 +0000 (08:29 +0000)]
Merge commit 'origin/master' into gallium-sw-api-2

14 years agollvmpipe: Cope with null Vertex element cso.
José Fonseca [Wed, 10 Mar 2010 07:23:29 +0000 (07:23 +0000)]
llvmpipe: Cope with null Vertex element cso.

CSO can often be null.

For example:
1. at initialization
2. using an util module (u_blit) right after initialization (it will push
   state and pop the previous null state)
3. at shutdown time (state shouldn't be bound when being destroyed)

Glean was hitting 2.

14 years agonouveau: translate PIPE_BUFFER_USAGE_UNSYNCHRONIZED
Ben Skeggs [Wed, 10 Mar 2010 05:22:53 +0000 (15:22 +1000)]
nouveau: translate PIPE_BUFFER_USAGE_UNSYNCHRONIZED

14 years agonv50: inline nv50_state_flush_notify()
Ben Skeggs [Tue, 9 Mar 2010 05:30:08 +0000 (15:30 +1000)]
nv50: inline nv50_state_flush_notify()

It's (rightly) not called from anywhere else now

14 years agonv50: remove nv50_context.state.instbuf
Ben Skeggs [Tue, 9 Mar 2010 05:29:12 +0000 (15:29 +1000)]
nv50: remove nv50_context.state.instbuf

14 years agonv50: remove unnecessary macro
Ben Skeggs [Tue, 9 Mar 2010 04:56:46 +0000 (14:56 +1000)]
nv50: remove unnecessary macro

14 years agonv50: move nv50_prim() into a header file rather than duplicating
Ben Skeggs [Tue, 9 Mar 2010 04:52:30 +0000 (14:52 +1000)]
nv50: move nv50_prim() into a header file rather than duplicating

14 years agonv50: add option to force immediate-mode submission, disable by default
Ben Skeggs [Tue, 9 Mar 2010 04:04:14 +0000 (14:04 +1000)]
nv50: add option to force immediate-mode submission, disable by default

14 years agonv50: re-add immediate mode vertex submission paths
Ben Skeggs [Mon, 8 Mar 2010 07:06:38 +0000 (17:06 +1000)]
nv50: re-add immediate mode vertex submission paths

14 years agonv50: when doing inline indices, split elt lists so they fit into pushbuf
Ben Skeggs [Mon, 8 Mar 2010 03:27:46 +0000 (13:27 +1000)]
nv50: when doing inline indices, split elt lists so they fit into pushbuf

14 years agonv50: reimplement draw_elements_instance(), use for draw_elements() too
Ben Skeggs [Fri, 5 Mar 2010 03:25:01 +0000 (13:25 +1000)]
nv50: reimplement draw_elements_instance(), use for draw_elements() too

This makes draw_elements()/draw_elements_instanced() do the right thing
for the non-inline elements cases, and not require flush_notify().

14 years agonv50: reimplement draw_arrays_instanced(), do draw_arrays() in terms of it
Ben Skeggs [Fri, 5 Mar 2010 00:08:12 +0000 (10:08 +1000)]
nv50: reimplement draw_arrays_instanced(), do draw_arrays() in terms of it

This makes draw_arrays()/draw_arrays_instanced() do the right thing and
not require the (probably broken anyway) flush_notify() usage.

It also fixes a potential bug in the behaviour of reading InstanceID from
shaders, where 0 should be read for non-instanced drawing, previously it
was possible to read non-0 ids if mixing instanced/non-instanced.

14 years agonv50: rip out inline push draw paths temporarily
Ben Skeggs [Thu, 4 Mar 2010 03:47:41 +0000 (13:47 +1000)]
nv50: rip out inline push draw paths temporarily

14 years agonv50: make use of scissor enable/disable method
Ben Skeggs [Thu, 4 Mar 2010 01:13:51 +0000 (11:13 +1000)]
nv50: make use of scissor enable/disable method

14 years agonv50: move magic 0x142c stuff to after state emission
Ben Skeggs [Thu, 4 Mar 2010 00:55:50 +0000 (10:55 +1000)]
nv50: move magic 0x142c stuff to after state emission

14 years agonv50: avoid unnecessary vp/gp/fp state changes
Ben Skeggs [Wed, 3 Mar 2010 23:52:47 +0000 (09:52 +1000)]
nv50: avoid unnecessary vp/gp/fp state changes

14 years agonv50: remove pre_pipebuffer_map hack....
Ben Skeggs [Wed, 3 Mar 2010 05:02:53 +0000 (15:02 +1000)]
nv50: remove pre_pipebuffer_map hack....

14 years agonv50: remove horrific abuse of nouveau_channel.flush_notify
Ben Skeggs [Wed, 3 Mar 2010 04:59:28 +0000 (14:59 +1000)]
nv50: remove horrific abuse of nouveau_channel.flush_notify

Really though, using this at all is just not a good idea in the 3D driver.
I'm almost certain the hardware will not like a reloc appearing between
begin()/end().. Anyways, this is still better than before, more fixes
to come..

14 years agonv50: always emit dummy relocs for all still-referenced buffers
Ben Skeggs [Wed, 3 Mar 2010 04:55:54 +0000 (14:55 +1000)]
nv50: always emit dummy relocs for all still-referenced buffers

14 years agonv50: ensure enough room for state changes in current pushbuf
Ben Skeggs [Wed, 3 Mar 2010 04:43:21 +0000 (14:43 +1000)]
nv50: ensure enough room for state changes in current pushbuf

Also allows the nv50_state_validate() caller to request a minimum amount
of space that itself requires, not all callers accurately use this yet
but the simple cases are now accounted for.

Rendering will also be dropped on the floor if validate fails now.

14 years agonv50: rework state emission
Ben Skeggs [Wed, 3 Mar 2010 04:26:25 +0000 (14:26 +1000)]
nv50: rework state emission

14 years agonv50: use relocs rather than re-uploading TIC all the time
Ben Skeggs [Wed, 3 Mar 2010 01:45:08 +0000 (11:45 +1000)]
nv50: use relocs rather than re-uploading TIC all the time

14 years agor300g: Reorder regs, save one dword.
Corbin Simpson [Wed, 10 Mar 2010 04:03:35 +0000 (20:03 -0800)]
r300g: Reorder regs, save one dword.

Or, put another way, save 10% on rendering calls.

14 years agowinsys/drm: Handle circular dependencies in Makefile.egl.
Chia-I Wu [Wed, 10 Mar 2010 02:12:45 +0000 (10:12 +0800)]
winsys/drm: Handle circular dependencies in Makefile.egl.

The libraries have circular dependencies.  Use --start-group and
--end-group when producing the final shared libraries.

14 years agost/egl: Fix build errors in ximage backend after merge.
Chia-I Wu [Wed, 10 Mar 2010 01:48:33 +0000 (09:48 +0800)]
st/egl: Fix build errors in ximage backend after merge.

This fixes assorted merge conflicts when master is merged to
gallium-sw-api-2 in 0c96690a5b6e1c2d114e7ec5f1e9d60a4ff2a330.

14 years agoi965: Fix ENDLOOP to only patch up this loop's BREAK and CONT.
Eric Anholt [Tue, 9 Mar 2010 22:22:51 +0000 (14:22 -0800)]
i965: Fix ENDLOOP to only patch up this loop's BREAK and CONT.

Corresponds to d225a25e21a24508aea3b877c78beb35502e942d and fixes
piglit glsl-fs-loop-nested.  Bug #25173.

14 years agoi965: Unalias all GLSL source regs from the destination regs used.
Eric Anholt [Tue, 9 Mar 2010 19:56:14 +0000 (11:56 -0800)]
i965: Unalias all GLSL source regs from the destination regs used.

We were doing it ad-hoc before, as instructions with potential
aliasing problems were identified.  But thanks to swizzling basically
anything can have aliasing, so just do it generally at source reg
setup time.  This is somewhat inefficient, because sometimes an
operation doesn't need unaliasing protection if the swizzling is safe,
but the unaliasing before didn't cover those cases either.

Fixes piglit glsl-fs-loop.

14 years agoi965: Print the offsets for WHILE and BREAK in disasm.
Eric Anholt [Tue, 9 Mar 2010 19:31:28 +0000 (11:31 -0800)]
i965: Print the offsets for WHILE and BREAK in disasm.

14 years agoi965: Fix nested loops in the VS.
Eric Anholt [Tue, 9 Mar 2010 17:56:42 +0000 (09:56 -0800)]
i965: Fix nested loops in the VS.

We were patching up all the break and continues between the start of
our loop and the end of our loop, even if they were breaks/continues
for an inner loop.  Avoiding patching already patched breaks/continues
fixes piglit glsl-vs-loop-nested.

14 years agoi965: Fix up VP constbuf leak on program delete.
Eric Anholt [Tue, 9 Mar 2010 00:08:33 +0000 (16:08 -0800)]
i965: Fix up VP constbuf leak on program delete.

14 years agor300: don't crash if there's no colorbuffer
Maciej Cencora [Tue, 9 Mar 2010 22:13:19 +0000 (23:13 +0100)]
r300: don't crash if there's no colorbuffer

14 years agoradeon: mark framebuffer as incomplete if renderbuffer format isn't supported by hw
Maciej Cencora [Sun, 7 Mar 2010 21:01:56 +0000 (22:01 +0100)]
radeon: mark framebuffer as incomplete if renderbuffer format isn't supported by hw

14 years agor300: add support for more rendering formats
Maciej Cencora [Sun, 7 Mar 2010 13:26:21 +0000 (14:26 +0100)]
r300: add support for more rendering formats

14 years agoradeon/r200/r300/r600: add is_format_renderable function
Maciej Cencora [Sun, 7 Mar 2010 13:34:21 +0000 (14:34 +0100)]
radeon/r200/r300/r600: add is_format_renderable function

14 years agoprogs/tests: use first color attachement
Maciej Cencora [Tue, 9 Mar 2010 20:42:41 +0000 (21:42 +0100)]
progs/tests: use first color attachement

Allows the tests to be run on drivers that supports only one color attachement.

14 years agor300: enable HW accelerated gl(Read/Copy/Draw)Pixels
Maciej Cencora [Tue, 9 Mar 2010 20:42:00 +0000 (21:42 +0100)]
r300: enable HW accelerated gl(Read/Copy/Draw)Pixels

14 years agoradeon: add hw accelerated glReadPixel support (not enabled yet)
Maciej Cencora [Tue, 9 Mar 2010 20:41:00 +0000 (21:41 +0100)]
radeon: add hw accelerated glReadPixel support (not enabled yet)

14 years agoglapi: Fix scons build -- list new file.
José Fonseca [Tue, 9 Mar 2010 20:43:13 +0000 (20:43 +0000)]
glapi: Fix scons build -- list new file.

14 years agoglapi: allow for any mangle prefix
George Sapountzis [Tue, 9 Mar 2010 20:03:24 +0000 (22:03 +0200)]
glapi: allow for any mangle prefix

14 years agoglapi: split out arch-specific code for entrypoints
George Sapountzis [Tue, 9 Mar 2010 20:03:24 +0000 (22:03 +0200)]
glapi: split out arch-specific code for entrypoints

14 years agoglapi: mv table functions to glapi_getproc.c and add local header
George Sapountzis [Tue, 9 Mar 2010 20:03:24 +0000 (22:03 +0200)]
glapi: mv table functions to glapi_getproc.c and add local header

14 years agodrop stray XFree86Server, XGLServer
George Sapountzis [Tue, 9 Mar 2010 20:03:24 +0000 (22:03 +0200)]
drop stray XFree86Server, XGLServer

14 years agosvga: Don't do culling while the software pipeline is active.
Keith Whitwell [Tue, 9 Mar 2010 18:14:34 +0000 (19:14 +0100)]
svga: Don't do culling while the software pipeline is active.

It does it for us, and additionally introduces potentially
back-facing triangles.

14 years agonull: Add a null software winsys.
José Fonseca [Tue, 9 Mar 2010 19:47:30 +0000 (19:47 +0000)]
null: Add a null software winsys.

One where framebuffer data will be read via texture transfers.

Useful for e.g., python state tracker.

14 years agomesa/st: initialize velements state properly
Roland Scheidegger [Tue, 9 Mar 2010 19:31:40 +0000 (20:31 +0100)]
mesa/st: initialize velements state properly

one variable is a bitfield where the rest is never written to, which caused
valgrind to complain. Might have caused cso to not recognize an already stored
state. Reported by Christoph Bumiller.

14 years agocso: don't forget to release vertex elements state
Roland Scheidegger [Tue, 9 Mar 2010 18:05:32 +0000 (19:05 +0100)]
cso: don't forget to release vertex elements state

14 years agotarget-helpers: missing files
Keith Whitwell [Tue, 9 Mar 2010 19:15:28 +0000 (19:15 +0000)]
target-helpers: missing files

14 years agor300g: kill pf_component_count
Marek Olšák [Tue, 9 Mar 2010 19:12:52 +0000 (20:12 +0100)]
r300g: kill pf_component_count

14 years agows/gdi: fix typo
Keith Whitwell [Tue, 9 Mar 2010 18:01:47 +0000 (18:01 +0000)]
ws/gdi: fix typo

14 years agogallium: create target for gdi libgl
Keith Whitwell [Tue, 9 Mar 2010 17:57:13 +0000 (17:57 +0000)]
gallium: create target for gdi libgl

14 years agows/xlib: no dependency on mesa state tracker
Keith Whitwell [Tue, 9 Mar 2010 17:55:19 +0000 (17:55 +0000)]
ws/xlib: no dependency on mesa state tracker

14 years agoegl/x11: use swrast-xlib helper
Keith Whitwell [Tue, 9 Mar 2010 17:31:50 +0000 (17:31 +0000)]
egl/x11: use swrast-xlib helper

14 years agogallium: create helper for swrast+xlib combination
Keith Whitwell [Tue, 9 Mar 2010 17:27:58 +0000 (17:27 +0000)]
gallium: create helper for swrast+xlib combination

Several targets may want to reuse this code.  It's pretty simple, not
sure if this is really a win.

14 years agoscons: Fix the libg-xlib Sconscript.
José Fonseca [Tue, 9 Mar 2010 17:08:36 +0000 (17:08 +0000)]
scons: Fix the libg-xlib Sconscript.

14 years agoscons: Always build the identity driver.
José Fonseca [Tue, 9 Mar 2010 17:08:16 +0000 (17:08 +0000)]
scons: Always build the identity driver.

14 years agogallivm: checkpoint: nearest mipmap filtering
Brian Paul [Tue, 9 Mar 2010 16:37:50 +0000 (09:37 -0700)]
gallivm: checkpoint: nearest mipmap filtering

The LOD is computed from texcoord partial derivatives and used to
select a mipmap level.  Still some bugs in texel fetching.  Lots of
rough edges and unfinished parts but the basics are in place.

Lots of changes to the lp_bld_arit.c code to support non-vector/scalar
datatypes.

14 years agoutil: simplify util_format_get_nr_components helper
Roland Scheidegger [Tue, 9 Mar 2010 16:27:45 +0000 (17:27 +0100)]
util: simplify util_format_get_nr_components helper

since the number of components is now stored in the pipe format description,
we obviously no longer need to figure this out ourselves.

14 years agoutil: Use bitshift arithmetic for pack too.
José Fonseca [Sun, 7 Mar 2010 01:24:57 +0000 (01:24 +0000)]
util: Use bitshift arithmetic for pack too.

14 years agotargets/libgl-xlib: add code to inject trace and identity layers
Keith Whitwell [Tue, 9 Mar 2010 15:58:45 +0000 (15:58 +0000)]
targets/libgl-xlib: add code to inject trace and identity layers

Finally we can inject layers for debug, trace and "other" with
relative ease between state-tracker and driver.

14 years agows/xlib: remove self-knowledge about users of xlib winsys
Keith Whitwell [Tue, 9 Mar 2010 15:25:42 +0000 (15:25 +0000)]
ws/xlib: remove self-knowledge about users of xlib winsys

Several software rasterizers can make use of this winsys, but there
isn't any reason why the winsys itself should know about them.

This change moves that information into the libgl-xlib target.

Need to fix up other targets making use of this winsys.

14 years agocso: Fix typo in assert.
Corbin Simpson [Tue, 9 Mar 2010 15:30:27 +0000 (07:30 -0800)]
cso: Fix typo in assert.

14 years agor300g: Precalculate and CSO-bind PSC state.
Corbin Simpson [Tue, 9 Mar 2010 07:36:04 +0000 (23:36 -0800)]
r300g: Precalculate and CSO-bind PSC state.

14 years agor300g: Cleanup old PSC code a bit.
Corbin Simpson [Tue, 9 Mar 2010 05:35:43 +0000 (21:35 -0800)]
r300g: Cleanup old PSC code a bit.

14 years agoidentity: fix copy & paste error
Roland Scheidegger [Tue, 9 Mar 2010 15:28:59 +0000 (16:28 +0100)]
identity: fix copy & paste error

14 years agor300g: fix gallium-vertexlementcso merge damage
Roland Scheidegger [Tue, 9 Mar 2010 15:24:47 +0000 (16:24 +0100)]
r300g: fix gallium-vertexlementcso merge damage