xen: remove -Werror when building host tools

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xvisor: new package

This new package provides Xvisor, an open-source type-1 hypervisor,
which aims at providing a monolithic, light-weight, portable, and
flexible virtualization solution.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas:
 - use MKIMAGE_ARCH instead of BR2_ARCH when calling mkimage
 - use $(MKIMAGE)
 - license is GPLv2+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs/manual: update pkg-kconfig doc about <pkg>_KCONFIG_DOTCONFIG

Content provided by Yann E. Morin.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pkg-kconfig: support alternative .config location

Kconfig clones, such as openconf used by xvisor [1], do not look for
.config at the root of the build directory, but in a subdirectory (e.g.
build/openconf).

This patch introduces a new Makefile variable named
$(2)_KCONFIG_DOTCONFIG, which contains the path to .config relative to
the source directory of the package. It defaults to .config and can be
overridden in the package Makefile.

It also creates the full directory hierarchy where the .config file is
stored, in case it does not exist (e.g. in xvisor).

This allows the use of the kconfig-package infrastructure with packages
relying on such clones.

[1] https://github.com/xvisor/xvisor/tree/master/tools/openconf

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: use "install -D" instead of "mkdir + cp", as suggested by
Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

infra/pkg-kconfig: Be sure to reconfigure the package on foo-reconfigure

Currently, calling foo-reconfigure for a kconfig-based package will not
re-trigger the configuration (kconfig-wise) step for the package.

This can be problematic when using an override-srcdir suring development
and the content of the veride-srcdir changes (e.g. on a rebase, a merge,
or during a bisect).

This is because the configuration (kconfig-wise) of the package is not
done in the _CONFIGURE_CMDS block, but as a separate action that is not
part of any step [0].

So, be sure to remove the stamp file .stamp_kconfig_fixup_done during
the foo-clean-for-reconfigure rule, so that the configuration is applied
again with the new source tree.

We use another rule, foo-clean-kconfig-for-reconfigure, because we do
not want to override the default foo-clean-for-reconfigure rule, and we
have no way to add conditional commands to it.

[0] The reasons it was not done are not entirely clear in my head, but
IIRC that was not working at the time we tried with Thomas DS.

Reported-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/autoconf-archive: bump to version 2016.03.20

Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openal: Disable build also for examples and tests

Fixes:

  http://autobuild.buildroot.net/results/a11eab534b8642077705d891329c1fd40d394419

Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/{mesa3d, mesa3d-headers}: bump version to 12.0.3

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

php: bump to 7.0.11

Signed-off-by: Tatsuyuki Ishi <ishitatsuyuki@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/upmpdcli: add patch to fix include path of log

The "log.{h,hxx}" header files are included from libupnpp.

As we are using the pkg-config file of libupnpp to get the header
include path, instead of the hardcoded `{prefix}/include/libupnpp`
these files are not found.

Upstream-status: https://github.com/medoc92/upmpdcli/issues/46

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/upmpdcli: add patch to use pkg-config for libupnpp

Building upmpdcli aborts because of an unsafe header inclusion of
`/usr/include/libupnpp`. Using `{prefix}` to get the header path is
wrong for cross-compilation.

Instead of hard-coding the flags for libupnpp use pkg-config to get the
correct ones.

Note that this patch adds the host-pkgconfig dependency unconditionally and
removes the necessity to pass the libupnpp manually to LIBS for a static
build.

Upstream-status: https://github.com/medoc92/upmpdcli/pull/49

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/upmpdcli: add patch to fix jsoncpp detection

Although jsoncpp is present, the build system of upmpdcli does not detect it.

The default installation path for the header files of jsoncpp is
{prefix}/json, but some systems (Debian) prefers to install the headers
in {prefix}/jsoncpp/json.

The build system only checks for the header files in
{prefix}/jsoncpp/json, so jsoncpp is not found.

This patch from upstream handles both cases now when checking for the jsoncpp
library.

The patch is squashed of two commits from upstream:
1/ aba96db0cfe8a2e5c825f4448c0ad184e21b50e1
2/ ce144f19a8c2e8c1e0ec3fe53699e874e5eb43fe

Fixes:
http://autobuild.buildroot.net/results/5bc6c558fccea0e1e1936894ce372f2b7b8ecac2
http://autobuild.buildroot.net/results/9c2d3892f17c240c44f7255d821d66acbed361f0
http://autobuild.buildroot.net/results/4d22729535ca4e6acbb48a25145611bb49c10149
http://autobuild.buildroot.net/results/fda321774c3eb225f966dd9f83def5329b703a03
http://autobuild.buildroot.net/results/f5eb306b0032e830f7f72ce80e318aa11774a5d1

.. and many more!

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/upmpdcli: fix missing dependencies

Starting with version 1.2 upmpdcli depends on libmicrohttpd and jsoncpp.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/upmpdcli: requires GCC 4.7

upmpdcli now uses C++11 features, meaning the minimum usable GCC version
is 4.7.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libupnpp: add patch to get pkg-config file

Apply a patch from upstream to install a pkg-config file for libupnpp.

Fetch from:
https://github.com/medoc92/libupnpp/commit/9f03bb0e7b47e2843edea6f25ed9eabbfb6412df

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: nitrogen*: enable VFP and NEON support

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

blktrace: needs MMU support

iowatcher/main.c uses system() which uses fork().

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

blktrace: add dependency on NPTL

blkiomon.c assumes that clock_nanosleep() is always available. But it
is only available with NPTL. Since it unconditionally uses it, we add
dependency on NPTL.

Fixes:
  http://autobuild.buildroot.net/results/c87/c87cd4a7b0bed938506bcf7e88d4cda60e28e6e5/

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nginx-naxsi: clarify pcre dependency

It is not directly obvious why we select pcre but not add it to the .mk
file, so add a comment to clarify.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

breakpad: enable for uClibc

There's nothing holding it off for uClibc-based toolchains so enable it.

Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/urg: fix build caused by missing header inclusion

Update select-h patch to also fix the C++ serial driver.

Fixes:
  http://autobuild.buildroot.net/results/cd7/cd76699188d2ee99b5f2d32b6a797de0d832a192/

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libcap-ng: annotate licenses with components

libcap-ng.so library is released under LGPLv2.1+ and programs testcap,
filecap, netcap and pscap are released under GPLv2+.

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libcap-ng: bump version to 0.7.8

Drop upstream patch

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

audit: update legal info

Programs are released under GPLv2+. README file says libraries
libaudit.* and libauparse.* are released under LGPL but there are two
files auparse/strsplit.c and lib/strsplit.c which are released under
GPLv2+ which makes both libraries GPL. Until we review situation with
upstream, we simply mention "unclear (libraries)".

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas: add "unclear (libraries)" as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

audit: bump version to 2.6.7

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

audit: remove autoreconf

Commit upstream 51925b7dd6d0("package/audit: Bump to version 2.6.5")
removed patch 0002 as part of version bump. But forgot to disable
autoreconf.

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: add optional dependency on audit

login and hwclock can be built with audit support. This patch adds
optional dependency on audit package if it is already selected.

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: add optional dependency on readline

fdisk and sfdisk tools can be built with readline support. This patch
adds optional dependency on readline if it is already selected.

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libubox: update legal info

Reviewed-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Reviewed-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
Signed-off-by: Rahul Jain <rahul.jain@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libubox: bump version

Reviewed-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Reviewed-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
Signed-off-by: Rahul Jain <Rahul.Jain@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-firmware: bump version

And copy firmware for BCM43430 and BCM43438, hence rpi3 wifi support at
last.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.{2, 14}.x and 4.4.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 4.7.x series to 4.7.4

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain-external: fix potential entire root filesystem removal

This reverts commit a0aa7e0e1750f6ace2879ea8adb1425a41431b79 and reworks
the code to fix a major and potentially catastrophic bug when the
following conditions are met:

 - The user has selected a "known toolchain profile", such as a Linaro
   toolchain, a Sourcery CodeBench toolchain etc. People using "custom
   toolchain profile" are not affected.

 - The user has enabled BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED=y to
   indicate that the toolchain is already locally available (as
   opposed to having Buildroot download and extract the toolchain)

 - The user has left BR2_TOOLCHAIN_EXTERNAL_PATH empty, because his
   toolchain is directly available through the PATH environment
   variable. When BR2_TOOLCHAIN_EXTERNAL_PATH is non-empty, Buildroot
   will do something silly (remove the toolchain contents), but that
   are limited to the toolchain itself.

When such conditions are met, Buildroot will run "rm -rf /*" due to
TOOLCHAIN_EXTERNAL_INSTALL_DIR being empty.

This bug does not exist in 2016.05, and appeared in 2016.08 due to
commit a0aa7e0e1750f6ace2879ea8adb1425a41431b79.

Commit a0aa7e0e1750f6ace2879ea8adb1425a41431b79 removed the assignment
of TOOLCHAIN_EXTERNAL_SOURCE and TOOLCHAIN_EXTERNAL_SITE to empty, as
part of a global cleanup to remove such assignments that supposedly
had become unneeded following a fix of the package infrastructure
(75630eba22b20d6140a5b58a6d1e35598fb3c0d3: core: do not attempt
downloads with no _VERSION set).

However, this causes TOOLCHAIN_EXTERNAL_SOURCE to be non-empty even
for BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED=y configuration, with the
following consequences:

 - Buildroot downloads the toolchain tarball (while we're saying the
   toolchain is already available). Not dramatic, but clearly buggy.

 - Buildroot registers a post-extract hook that moves the toolchain
   from its extract directory (output/build/toolchain-external-.../ to
   its final location in host/opt/ext-toolchain/). Before doing this,
   it removes everything in TOOLCHAIN_EXTERNAL_INSTALL_DIR (which
   should normally be host/opt/ext-toolchain/).

Another mistake that caused the bug is commit
b731dc7bfb9c8ce7be502711f0b44ccab5515f1d ("toolchain-external: make
extraction idempotent"), which introduce the dangerous call "rm -rf
$(var)/*", which can be catastrophic if by mistake $(var) is
empty. Instead, this commit should have just used rm -rf $(var) to
remove the directory instead: it would have failed without consequences
if $(var) is empty, and the directory was anyway already re-created
right after with a mkdir.

To address this problem, we:

 - Revert commit a0aa7e0e1750f6ace2879ea8adb1425a41431b79, so that
   _SOURCE and _SITE are empty in the pre-installed toolchain case.

 - Rework the code to ensure that similar problems will no happen in the
   future, by:

   - Registering the TOOLCHAIN_EXTERNAL_MOVE hook only when
     BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y, since moving the toolchain is
     only needed when Buildroot downloaded the toolchain.

   - Introduce a variable TOOLCHAIN_EXTERNAL_DOWNLOAD_INSTALL_DIR which
     is the path in which Buildroot installs external toolchains when it
     is in charge of downloading/extracting them. Then, the
     TOOLCHAIN_EXTERNAL_MOVE hook is changed to use this variable, which
     is guaranteed to be non-empty.

   - Replace the removal of the directory contents $(var)/* by removing
     the directory itself $(var). The directory was anyway already
     re-created if needed afterwards. Thanks to doing this, if $(var)
     ever becomes empty, we will do "rm -rf" which will fail and abort
     the build, and not the catastrophic "rm -rf /*".

Reported-by: Mason <slash.tmp@free.fr>
Cc: Mason <slash.tmp@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 4.7.4

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libinput: bump to version 1.5.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ccache: bump to version 3.3.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs: Add support for Solidrun's MX6 Cubox/Hummingboard

Add support for Solidrun's MX6 Cubox/Hummingboard.

For more information about these boards, please check:

https://www.solid-run.com/freescale-imx6-family/hummingboard/
https://www.solid-run.com/freescale-imx6-family/cubox-i/

U-Boot is capable of detecting the version of the board in run-time
and loads the correct dtb.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-pyusb: bump to version 1.0.0

Remove dependency on Python 2 only.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-tornado: bump to version 4.4.1

Remove upstream patch.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pango: bump to version 1.40.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libcurl: bump version to 7.50.3

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

httping: bump to version 2.5

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wandboard: Remove unneeded return code

There is no need to handle this return code, so just remove it.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Revert "package/urg: fix build"

This reverts commit 57e61a91531bf8ea696b5613bd8d846cc645a1d5.

The patch doesn't apply, and makes the urg package fail in all
situations.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openal: Use upstream patch to fix aarch64 build

Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libupnpp: add patch to fix build issue

Bumping libupnpp to version 0.15.0 introduced a build error for some
architectures:

```
./libupnpp/workqueue.h:308:29: error: field 'res' has incomplete type
         std::future<void *> res;
                             ^
./libupnpp/workqueue.h: In member function 'bool
WorkQueue<T>::start(int, void* (*)(void*), void*)':
./libupnpp/workqueue.h:81:25: error: invalid use of incomplete type
'class std::packaged_task<void*(void*)>'
             w.res = task.get_future();
```

The problem is that `std::future` is not available for all
architectures, e.g. it is missing for ARMv5 (soft-float). libstdc++
enables `std::future` only if `ATOMIC_INT_LOCK_FREE > 1`, which
according the the libstdc++ documentation means that operations on
atomic ints are guaranteed to be lock-free.

This check is not true for some target, e.g. the toolchain for the
ARMv5 target defines:

```
$ echo | /usr/bin/arm-linux-g++ -dM -E - | grep ATOMIC_INT_LOCK_FREE
#define __GCC_ATOMIC_INT_LOCK_FREE 1

```

We add a patch from upstream which detects if `std::future` is available
and opts-out the functionality for unsupported targets.

Fixes:
http://autobuild.buildroot.net/results/f8eb38ef79160e1f646dae0be19f27fae82a58bc
http://autobuild.buildroot.net/results/158e0ceeff009146b78a0d2bb278c76479bafc34
http://autobuild.buildroot.net/results/1760cf53c77e16bb2b5bc795bd0ce5eb65f258f2
http://autobuild.buildroot.net/results/5b73e52495aa1bbb2c704492237da784b9d74bc2
http://autobuild.buildroot.net/results/6d922a1bbace024fcf040beb49bbb119036865ef
http://autobuild.buildroot.net/results/bebb8983e7579ee4b4bcf18f037c7797ab86f8db
http://autobuild.buildroot.net/results/0f1a5832ced2a6ec2e18f9f14197446fda6af692
http://autobuild.buildroot.net/results/94a9cc349f23a47246b06619a019bcb917493415
http://autobuild.buildroot.net/results/19fba094098af5c1ce1e1371e5e88393c4a6ac9c
http://autobuild.buildroot.net/results/578935b5c04005d1f096059387d16911f953ec6f
http://autobuild.buildroot.net/results/2ad698f1665b7b886141672181cb76ec3c40a743

and more...

Note, that we enable autoreconf as the patch touches configure.ac.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/wandboard: Remove BR2_LINUX_KERNEL_CUSTOM_GIT

Now that we use a mainline kernel for wandboard, we no longer
need to select BR2_LINUX_KERNEL_CUSTOM_GIT, so remove it.

This fixes the following warning:

make wandboard_defconfig
/configs/wandboard_defconfig:19:warning: override: BR2_LINUX_KERNEL_CUSTOM_VERSION changes choice state
#
# configuration written to /home/fabio/buildroot/.config

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/orangepipc: Use Linux 4.7.3

There's now an sun8i-h3-orangepi-pc dts, so we can use that and drop the
hack in the post-image script.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/orangepipc: Use u-boot 2016.09

Among others, this adds support for the ethernet interface.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sqlite: bump version to 3140200 (3.14.2)

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

apache: add customization of MPM

MPM can be selected between event, prefork or worker
Set worker as the default one as it was before even if event MPM is
better on system supporting thread safe polling

Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mx6ulpico: Use kernel 4.8-rc5

With kernel 4.8-rc5 we no longer need to use the "CONFIG_SMP=n" workaround
as the reboot issue has been fixed upstream by commit 059e232089e4
("irqchip/gic: Allow self-SGIs for SMP on UP configurations")

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: allow specifying 4.8 as kernel header version

Even though 4.8 is not released yet, some people may want to build a
system using the 4.8-rc kernel, and point to the kernel sources as the
kernel headers to use for the toolchain.

In order to make this possible, this commit adds support for specifying
4.8 as the kernel headers version, in both the internal and external
toolchain logic.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
[Thomas: remove support for 4.8 headers selection, and rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/warp7: Use mainline U-Boot

warp7 is well supported in mainline U-Boot 2016.09, so switch
to this version.

As the current supported kernel is based on a 4.1 kernel from NXP,
use the "warp7_secure" U-Boot target as NXP kernel needs to boot
in secure mode.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/wandboard: Bump to U-Boot 2016.09

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/imx6ulpico: Bump to U-Boot 2016.09

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-rtsp-server: new package

Based on patch by Phil Edworthy:
http://lists.busybox.net/pipermail/buildroot/2010-June/035777.html

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Reviewed-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
Signed-off-by: Piotr Nakraszewicz <piotr.nakraszewicz@imgtec.com>
Signed-off-by: Abhilash Tuse <Abhilash.Tuse@imgtec.com>
[Thomas: add host-pkgconf to the dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/urg: fix build

Update select-h patch to also fix the C++ serial driver.

Fixes:
  http://autobuild.buildroot.net/results/cd7/cd76699188d2ee99b5f2d32b6a797de0d832a192/

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uboot-tools: bump to version 2016.09

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boot/uboot: bump to version 2016.09

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nginx-naxsi: add missing pcre dependency

Fixes:
  http://autobuild.buildroot.net/results/9c7/9c7bad6831b09251af81e2bbfc595a241df87c70/

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

syslinux: add patch to disable pie

Ubuntu 16.10 has pie enable by default. This causes a build failure with
syslinux.

https://bugs.launchpad.net/ubuntu/+source/syslinux/+bug/1579023

Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
[Thomas: improve patch description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

vim: bump version to v8.0.0001

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wandboard: Make explicit that a ext4 rootfs is used

Make explicit that a ext4 rootfs is used.

As explained by Thomas Petazzoni:

"the ext4 filesystem is already used.
Indeed, the ext4 image is a symlink to the ext2 image, and the ext2
image is in fact an ext4 image:

-rw-r--r-- 1 thomas thomas 3763200 sept. 11 21:54 rootfs.ext2
lrwxrwxrwx 1 thomas thomas      11 sept. 11 21:54 rootfs.ext4 -> rootfs.ext2"

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

micropython: add upstream patch to fix build failures

This allows micropython to build with a host python version of 2.6.

Fixes:
  http://autobuild.buildroot.net/results/212cee82cc9db81cf1524925d106e01fc1e62ce5
  http://autobuild.buildroot.net/results/4f72a602702f4eac1fe8c4a385ebfeb6e1c50df2

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/pugixml: Fix CMakelists.txt cxx_long_long_type bug.

CMakelist.txt tries to enable the cxx_long_long_type option,
even if the feature isn't available. (Which causes some builds to fail)

The included patch checks if the option is present before applying it.

The patch was backported from:
https://github.com/zeux/pugixml/commit/4dbb5646196a4a3cc94097f1473ef11d1d44df11

Signed-off-by: Theo Debrouwere <t.debrouwere@televic.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/php-ssh2: fix kconfig circular deps after libssh2 fix

After we simplified the libssh2 dependencies, the new dependencies were
not propagated to the php-ssh2 package, causing circular dependencies:

    package/openssl/Config.in:1:error: recursive dependency detected!
    package/openssl/Config.in:1:    symbol BR2_PACKAGE_OPENSSL is selected by BR2_PACKAGE_LIBSSH2
    package/libssh2/Config.in:1:    symbol BR2_PACKAGE_LIBSSH2 is selected by BR2_PACKAGE_PHP_SSH2
    package/php-ssh2/Config.in:1:   symbol BR2_PACKAGE_PHP_SSH2 depends on BR2_PACKAGE_OPENSSL

Just drop the now-useless dependency inherited from libssh2: libssh2 now
has no dependency.

Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board/minnowboard-max: Add kernel options to support USB disks

As reported by bug #9176 the current v4.6 kernel config
(used by Minnowboard MAX and Turbot) does not support
USB disks. Since this is a pretty essential functionality,
it's desirable to have it, so let's add the required options.

Kernel config linux-v3.8.config (currently used by the first
generation Minnowboard) doesn't need this change.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imx6dlsabresd: use zImage

U-Boot, with the default environment, is looking for a zImage.

Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imx6sololiteevk: use zImage

U-Boot, with the default environment, is looking for a zImage.

Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imx6sololiteevk: use the common genimage template

* Generate an sdcard image based on the common Freescale genimage
  template.

Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board/freescale: use the common genimage template

The boards imx6dlsabreauto, imx6dlsabresd, imx6qsabreauto, imx6qsabresd,
imx6sxsabresd were referring to board/freescale/create-boot-sd.sh for
the sdcard image generation.

This commit:
* Removes board/freescale/create-boot-sd.sh
* Uses the common Freescale genimage template instead.
  The offset of the first partition was 1MB in the script and is
  modified to 8MB in the template.
* Fixes the readme.txt file accordingly

Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board/freescale: factorize genimage logic

For the boards imx6ulevk, imx6sabresd, mx25pdk, mx51evk, mx53loco,
warpboard:
* Replace genimage.cfg with a common Freescale genimage template named
  genimage.cfg.template because they all use the same layout.  The only
  difference comes from the device tree blobs.
* Replace each post-image.sh script with a generic post-image.sh script
  which is able to generate the right genimage.cfg depending on:
** the image type (zImage or uImage) from BR2_LINUX_KERNEL_UIMAGE
** the device tree blobs from BR2_LINUX_KERNEL_INTREE_DTS_NAME
** the rootfs type (ext2, ext3 or ext4) from BR2_TARGET_ROOTFS_EXT2
* Fix the readme.txt files accordingly

Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[Thomas: remove handling of rootfs type, using rootfs.ext2 in all cases
is fine, rootfs.ext3 and rootfs.ext4 are just symbolic links to it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

binutils: fix makeinfo related issue

The latest version of binutils, 2.27, added in commit
b700157db40410907d6a07582eacbb5030fd919e, fails to build on systems
that don't have makeinfo installed. This commit therefore applies the
same fixup as the one used for binutils 2.26, which consists in
touching all the .info files, so that they don't get rebuilt.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libssh2: fix dependency on libgcrypt

Since 2f89476 (package/libgpg-error: bump to version 1.23), libssh2 has
inherited the dependency from libgcrypt (propagated from libgpg-error).

However, since libssh2 can use either openssl or libgcrypt as a backend,
the dependency should be relaxed when openssl is available.

But the test is broken and inverted: it will make libssh unavailable as
soon as openssl is enabled.

Fix this dependenc byt doing what other similar packages do: select
openssl if the other crypto backend (here libgcrypt) is not enabled.
This also allows us to drop the propagated dependency on the arch
condition.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libssh: fix dependency on libgcrypt

Since 2f89476 (package/libgpg-error: bump to version 1.23), libssh has
inherited the dependency from libgcrypt (propagated from libgpg-error).

However, since libssh can use either openssl or libgcrypt as a backend,
the dependency should be relaxed when openssl is available.

But the test is broken and inverted: it will make libssh unavailable as
soon as openssl is enabled.

This in itself is already incorrect, but that can cause further issues,
as some packages (e.g. Kodi) will select (indirectly) openssl, and has
an option to select libssh; enabling that option causes unmet direct
dependencies of libssh:

    warning: (BR2_PACKAGE_KODI_LIBSSH) selects BR2_PACKAGE_LIBSSH which
    has unmet direct dependencies (BR2_USE_MMU && !BR2_STATIC_LIBS &&
    BR2_TOOLCHAIN_HAS_THREADS && BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS
    && !BR2_PACKAGE_OPENSSL)

Fix this dependency by doing what other similar packages do: select
openssl if the other crypto backend (here libgcrypt) is not enabled.
This also allows us to drop the propagated dependency on the arch
condition.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openal: use upstream patch to detect run-time NEON support

Signed-off-by: André Hentschel <nerv@dawncrow.de>
[Thomas: download patches directly from Github.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openal: add upstream patch to fix FPU related build failures

Fixes:

  http://autobuild.buildroot.net/results/b57/b5777a0ed33f6bb7a5fc0486ea21ecef58615dac/build-end.log

Signed-off-by: André Hentschel <nerv@dawncrow.de>
[Thomas:
 - download patch directly from Github.
 - add reference to autobuilder failure.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

jemalloc: add a check for valgrind being configured as well

jemalloc can be compiled with valgrind support being enabled
to produce proper output, so when the valgrind package has
been configured configure jemalloc appropriately.

In addition, make sure to disable valgrind support unconditionally in
the host variant of jemalloc.

Signed-off-by: Charles Hardin <ckhardin@exablox.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gtest: fix URL in package description

http://code.google.com/p/googletest redirects to
https://github.com/google/googletest, now.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wandboard: Select required host tools for SD card generation

Select the required host tools for proper SD card generation.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wandboard: Use U-Boot 2016.07

Upgrade U-Boot version to 2016.07 and make proper use of U-Boot
distro configuration features.

Provide a boot.scr binary script that is one of the standard ways to
pass a U-Boot script with distro features enabled.

With this method the uboot-env.txt file is no longer needed, so it is
removed.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wandboard: Use kernel version 4.7.3

Wandboard is well supported in the mainline kernel, so let's switch
from the 3.14 vendor kernel to 4.7.3 mainline kernel version.

As mainline use more dts files to support both B1 and C1 versions of the
board, adjust the dts entries accordingly.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libusb: bump version to 1.0.20, switch to Github

This commit updates libusb to version 1.0.20, and adds a patch that
should fix parallel make issues particular to this version and probably
fixed in the next version.

This commit also moves to using Github as the source for libusb.

Signed-off-by: Jeroen Roovers <jer@airfi.aero>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

legacy/kernel-headers: adjust recommended target

Previously they were set at next available version, which is problematic
since new syscalls can be introduced.
So switch to lower available.
There's a caveat for 3.1 and 3.0 headers though since there's no lower
than 3.2, so keep it at 3.2 for those unfortunately.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: remove deprecated versions

Linux headers 3.19.x and 4.0.x have been deprecated for a while now, so
it's time to remove them.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

system: fix unmet dependencies

Don't force remounting / read/write when using a customskeleton and
systemd as init system, to fix the following unmet dependencies:

    warning: (BR2_INIT_SYSTEMD) selects BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW
    which has unmet direct dependencies (BR2_ROOTFS_SKELETON_DEFAULT)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/weston: fix unmet dependencies

Properly propagate dependencies from freerdp to fix the following unmet
dependencies:

    warning: (BR2_PACKAGE_WESTON_RDP) selects BR2_PACKAGE_FREERDP which has
    unmet direct dependencies (BR2_INSTALL_LIBSTDCPP && BR2_USE_WCHAR &&
    !BR2_STATIC_LIBS && BR2_TOOLCHAIN_HAS_THREADS && BR2_USE_MMU &&
    BR2_TOOLCHAIN_HAS_SYNC_4)

Reorder deps to have architectures deps first.

Remove "broken" dependency from comment; add missing ones.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/docker-engine: fix unmet dependencies

Properly propagate dependencies from docker-containerd to fix the
following unmet dependencies:

    warning: (BR2_PACKAGE_DOCKER_ENGINE_DAEMON) selects
    BR2_PACKAGE_DOCKER_CONTAINERD which has unmet direct dependencies
    (BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS &&
    BR2_PACKAGE_HOST_GO_CGO_LINKING_SUPPORTS && BR2_TOOLCHAIN_HAS_THREADS &&
    BR2_USE_MMU && BR2_USE_WCHAR)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux/ext: fix Xenomai unmet dependencies

Properly propagate the Xenomai dependencies to the corresponding kernel
extension, to fix the following unmet dependencies:

    warning: (BR2_LINUX_KERNEL_EXT_XENOMAI) selects BR2_PACKAGE_XENOMAI
    which has unmet direct dependencies (BR2_PACKAGE_XENOMAI_ARCH_SUPPORTS
    && BR2_TOOLCHAIN_HAS_THREADS && !BR2_TOOLCHAIN_USES_MUSL)

While at it, move the comment lower, after the path option, so that the
path option is properly indented in the menuconfig.

Add markers to separate each extension.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-firmware: bump version

Bump to the latest (as of this writing) linux-firmware git version.
This adds support for newer iwlwifi firmware versions that are required
for newer kernel series.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-firmware: add bluetooth firmware for intel chips

It probably makes no sense to try split them up by model since there
aren't that big.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/upmpdcli: bump to version 1.2.2

Upstream did not provide a hash file, so the hash was calculated
manually.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libupnpp: bump to version 0.15.0

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

squid: bump to version 3.5.21

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

smcroute: bump to version 2.1.1

Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

luarocks: bump to version 2.4.0

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/galileo: switch back to the original kernel repo

This commit switches the galileo_defconfig to use the orignal Linux
kernel repo, which was used prior to commit
fc8cac962baf5668dbc623ae5d411b75f77d3384.

Signed-off-by: Padraig Connolly <padraig.connolly@intel.com>
[Thomas: improved commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xserver_xorg-server: glamor depends on libgl

Fixes
http://autobuild.buildroot.net/results/1f6/1f6131c25738577afd8e097d126e8166cbcfcdd8/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>