arch/arm: some variants need different gcc versions

Take the conditions currently specified in the gcc version choice.

Also, the conditions explained in the commit log for 78c2a9f7 were not
all properly applied, especially the a57-a53 combo needs gcc-6, but
78c2a9f7 forgot to add the condition to gcc-4.9.

gcc-4.9 was excluded for cortex-a17 and a72, but the CodeSourcery
external toolchain, which uses 4.8, was not excluded for those two
cores. Now it is.

Remove the arch condition from gcc and the external toolchains.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

arch/mips: some variants need different gcc versions

We use the conditions currently expressed in the gcc version choice.

We leave the musl vs mips64 conditions in gcc, because the "fault"
really is on gcc, which does not recognise the mips64+musl tuples,
so the fix lies within gcc, and the current conditions are fitting.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

arch/bfin: needs gcc >= 6

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain/external: hide versions too old for the current arch

Hide the toolchains if the arch requires a gcc version more recent
than the one they provide.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain/external-custom: hide versions too old for the current arch

When an architecture expresses a requirement on the gcc version, limit
the version choice in the custom external toolchain.

The rationale being that there is no point in offering that version to
the user if we know before-hand that the gcc version will not work for
that architecture.

All versions below the minimum we support is just made conditional to
that minimum as well, including the "older" entry.

However, this means that the "older" entry is no longer available when
the architecture requires a minimum gcc version. A user who wants to use
a toolchain with a gcc older than the minimum will have no choice but to
realise the toolchain is not suitable (or lie and we would catch that
when checking the gcc version anyway).

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gcc: hide versions too old for the current arch

Begin the conversion from hard-coded dependencies on architectures, to
architecture-specified version requirement, using the newly introduced
BR2_ARCH_NEEDS_GCC_AT_LEAST_XXX symbols.

Hard-coded dependencies will be removed progressively, as archs are
individually converted over to using the new symbols.

We do not change the architecture-specific versions for ARC and
OpenRISC, because there is no point in doing so for those, as they use
special, non-upstream versions anyway.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

arch: introduce minimal required gcc version

Some CPU variants require that a recent-enough gcc be selected. For
example, ARM's cortex-a35 requires gcc-5, while cortex-a73 requires
gcc-7. Same goes for other architectures, of course.

Currently, we hard-code every such conditions in the gcc version choice,
as well as in the individual external toolchains.

However, as we add even more CPU variants, the conditions are getting
more and more complex to write and maintain.

Introduce new symbols, that architectures can select if they have a
specific requirement on the gcc version. gcc and external toolchains
can then properly depend on those symbols.

The burden of maintaining the requirements on the gcc version now falls
down to the architeture, instead of being split up in gcc and all the
external toolchains.

As the oldest gcc version to handle, we can either choose gcc-4.9, as
the oldest version we support in our internal toolchain, or choose
gcc-4.8, as the oldest external toolchain we support (except for the
custom ones, but they'll be handled specifically in upcoming changes).
We choose to go back up to gcc-4.8.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

hostapd: add support for Realtek driver

Since kernel drivers for Realtek wireless chips use non-standard
interfaces, upstream hostapd does not support them. One have to apply
an external patch for hostapd to work with these chips. See:
https://github.com/pritambaral/hostapd-rtl871xdrv

A configuration option is added to enable support for Realtek chips,
and it's turned off by default.

Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Tested-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mtd: be explicit about config options for the host

Instead of letting auto-detection do its job, be explicit about the
fact that we want the JFFS2 and UBIFS utilities when building the host
variant of mtd.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-cheroot: bump version to 5.10.0

Fix licence file name and add checksum.

Fixes:
http://autobuild.buildroot.net/results/94d/94dee5b01e0f7693d4e6e05074e7d93e92236e2c

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libmaxminddb: bump to version 1.3.0

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tinycbor: bump to version 0.4.2

- Remove patch (already in version)
- Add LICENSE hash
- Change github repo name from 01org to intel

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libupnp: bump to version 1.6.24

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

motion: fix build on musl

Some toolchains (musl) have pthread_setname_np but not pthread_getname_np.
The first patch fixes check on pthread_setname_np and the second one add
a check for pthread_getname_np

Fixes:

  http://autobuild.buildroot.net/results/65534775c5977e2424c5f5c63c46f9d0f39d7e1b

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS, .gitlab-ci.yml: fix typoes in imx6sx-sdb board name

The addition of a new defconfig in commit
459e3320dc234f96b93661bed1a753e477aeab17 ("configs/imx6sx-sdb: Add new
defconfig") introduced changes in the DEVELOPERS file and
.gitlab-ci.yml file that were not matching the defconfig name. This
commit fixes those issues.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/git: add optional support for pcre2

Renamed --with-libpcre to --with-libpcre1. Currently --with-libpcre
activates pcre1 support but this can change in the future to pcre2:
https://github.com/git/git/blob/df7fd961a9d9ba60840ffc0868d36cc3db2aec74/configure.ac#L258

Please note that we cannot use --with-/--without because it will lead
to an error reported by configure, for example

    --with-libpcre1 --without-libpcre2

will produce

configure: error: Only supply one of --with-libpcre1 or --with-libpcre2!

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-networkmanager: Bump to version 2.0.1

Added new runtime dependency on python-six.

Dropped dbus-python as build time dependency (it's only runtime
dependency).

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

refpolicy: bump to 2.20170805

In addition to a simple bump, the following extra changes have occured:
  - Change the refpolicy site to the official release URL.
  - Remove REFPOLICY_SITE_METHOD and REFPOLICY_GIT_SUBMODULES as the contrib
    submodule is included in the release tarball.
  - Refpolicy is now compatible with python3, as such, remove host-python.
    from the dependencies and add a check for python3 or python in it's place.
  - Add upstreamed 0001-fix-regex-escape-sequence-error.patch to fix building
    against python3.6.
  - Add sha256 license hash to hash file.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-mwclient: bump version to 0.8.6

Version 0.8.2 added OAuth support so we need python-requests-oauthlib
as runtime dependency from now on. This package also has a runtime
dependency on python-requests so all we need is to update the select
command in Config.in.

Removed patch applied upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-requests-oauthlib: new package

Needed for python-mwclient version bump to 0.8.6.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-oauthlib: new package

Needed for python-mwclient version bump to 0.8.6.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uboot: Use BR2_TARGET_UBOOT_SPL_NAME for TPL name

Since the BR2_TARGET_UBOOT_SPL_NAME option accepts a space-separated
list of binaries, the same option can be reuses for TPL binaries as
well. This commit updates the string and help text to indicate that
the same option can be used for SPL and TPL.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/waylandpp: new package

Building waylandpp for the target requires a wayland-scanner++ binary
built for the host.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: use 'depends on BR2_PACKAGE_WAYLAND' instead of a select.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-cherrypy: bump version to 12.0.1

Add licence file checksum and new runtime dependencies.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-cheroot: bump version to 5.9.0

Omit 5.9.1 as is has broken Python files.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-jaraco-classes: new package

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/dovecot-pigeonhole: bump version to 0.4.21

Added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/dovecot: bump version to 2.2.33.2

Added license hashes.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/mx53loco: Bump U-Boot and kernel versions

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libupnp18: new package

Branch 1.8.x of libupnp is not compatible with branch 1.6.x so add a
dedicated package and make it depends on !BR2_PACKAGE_LIBUPNP as
suggested by Thomas Petazzoni and Arnout Vandecappelle during review
of "libupnp: add 1.8.3 version" patch.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: fix the dependencies of the Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

netcat-openbsd: add source and license hashes

Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/imx6-sabreauto: Bump kernel and U-Boot versions

Bump kernel to version 4.14 and U-Boot to 2017.11.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/imx6ulevk: Add new defconfig

Add support for imx6ulevk_defconfig that allows booting a mainline
kernel and mainline U-Boot.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/armadeus_apf28: bump kernel version to latest 4.9 LTS

As there is now a defconfig inside kernel sources for mxs platforms, use it.

Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openntpd: add optional dependency on LibreSSL

OpenNTPD looks for a crypto library with tls_config_set_ca_mem, which
is available in LibreSSL but not OpenSSL. If tls_config_set_ca_mem is
found, crypto support is added to the build.

Because this is not currently checked, crypto support might not be
added due to the order of the build. Add a small check to see if
BR2_PACKAGE_LIBRESSL is selected, and if so, add a dependency for it.

Also add a note about this in the Config.in help section.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openntpd: update to 6.2p3

Other changes:

  - Remove upstream patch.
  - Change locally computed hash to hash from the SHA256 URL.
  - Add sha256sum for license file.

Note that we need to keep <pkg>_AUTORECONF = YES even though the patch
touching the Makefile.am has been removed, because our libtool patch
doesn't apply on the bundled ltmain.sh.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: explicitly use /usr/{bin, sbin, lib}, with merged usr

Prevent the installation from attempting to move shared libraries from
${usrlib_execdir} to ${libdir} if both paths are the same, which leads
to error messages like this:

  mv: '$(TARGET_DIR)/usr/lib/libfoo.so.1' and '$(TARGET_DIR)/lib/libfoo.so.1' are the same file

That error is not fatal but let's avoid possible future problems.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-raven: new package

Changes since v2:
- remove newlines from Config.in
- add LICENSE hash

Changes since v1:
- reword commit to match upstream style
- fold the DEVELOPERS modifications into the same commit
- add Config selections for required python core modules
- bump version to 6.3.0

Tested in a clean chroot, events are generated for exceptions, and
reported to the server configured for the client.

Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

freetype: bump to 2.8.1

In addition, add hashes for all three license files.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

expat: bump to 2.2.5

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libpng: bump to 1.6.34

In addition, add a hash for the license file.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

harfbuzz: bump to 1.7.1

In addition, add a hash for the license file.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libxml2: bump to 2.9.7

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pango: bump to 1.140.14

In addition, add a hash for the license file.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

time: bump to 1.8

In addition:
- Update license to GPL-3.0+
- Add a shash for the license file.

See: https://lists.gnu.org/archive/html/info-gnu/2017-11/msg00002.html for
more information.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nginx: bump to 1.12.2

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fftw: bump to 3.3.7

In addition, add a hash for the license file

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

bash: bump to 4.4.12

In addition, remove upstreamed patches and add a hash for the license
file.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Thomas: indicate pgp signature file address in hash file, as
suggested by Baruch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

audit: bump to 2.8.1

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luasec: bump to version 0.6

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gptfdisk: bump to version 1.0.3

This version has a new command line argument to sgdisk, -j, that lets one
change the starting address of where the GPT partition table entries are
stored.

The iMX SoC ROM loader, and perhaps others, expects the bootloader to start
at sector 2.  Using this option with gptfdisk lets the table entries move
to make space for the bootloader image.

Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

motion: bump to version 4.1

- Remove 0001-configure.ac-use-given-CFLAGS-LIBS-for-mysqlclient-l.patch,
it does not have been sent upstream but issue has been fixed by
https://github.com/Motion-Project/motion/commit/3b7164f7f9c2b123f850f8cd1bc0a860ca51c0fe#diff-67e997bcfdac55191033d57a16d1408a
- 0002-Rename-base64_encode.patch has been integrated into this version
- --without-jpeg-turbo has been deleted from configure.ac
- libsdl dependency has been removed

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

webp: add an option to enable webpmux

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board/lego/ev3: update to 4.14 kernel and 2017.11 U-Boot

This updates the LEGO MINDSTORMS EV3 board to Linux kernel 4.14 and
U-Boot 2017.11.

* Kernel patches are dropped because they are in mainline now.
* This caused the kernel image to be >3M so some adjustments to the image
  sizes/layout needed to be made in U-Boot.
* Updated U-Boot version bumped since we are touching this config anyway

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/imx6sx-sdb: Add new defconfig

Add support for imx6sx-sdb_defconfig that allows booting a mainline
kernel and mainline U-Boot.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/imx6slevk: Add new defconfig

Add support for imx6slevk_defconfig that allows booting a mainline
kernel and mainline U-Boot.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

kexec-lite: Bump version

>From this version kexec-lite gained support for FreeBSD kernel
loading.

Signed-off-by: Patryk Duda <pdk@semihalf.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-imx: fix v4l2 plugins disable options

Latest bump to v0.13.0 didn't take care of the following upstream
commit:

  7bfbf71 v4l2: Rename to v4l2video and add switches to enable/disable sink/source

To address that, this commit:

 - Uses the new name of the v4l2 source configure script option

 - Introduce a new Config.in option to control the build of the v4l2
   sink support

Fixes:

  http://autobuild.buildroot.net/results/5c404a2a28a4052056e5c9a7edda40641fe55f9e

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

netcat-openbsd: bump to 1.178-3

Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libogg: bump to version 1.3.3

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uboot-tools: bump to version 2017.11

Drop patch 0005 as it has already been applied upstream.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uboot: bump to version 2017.11

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libnl: bump to version 3.4.0

Drop static build fix patch; upstream fixed static build in a different
way (https://github.com/thom311/libnl/pull/141).

Following the patch removal, autoreconf is not needed anymore.

Add license hash.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libpjsip: remove deprecated config options

disable-small-filter and disable-large-filter have been deprecated as
of 2.7, causing messages during compile time complaining about how they
are deprecated and have no effect.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/mx6cubox: Bump U-Boot and kernel versions

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-treq: bump version to 17.8.0

Add new runtime dependencies and add licence file checksum.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libgdiplus: bump to version 5.4

Also, enable giflib if selected by the user and remove patch already
applied upstream.

Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi: bump version to 17.6

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/olimex_a20_olinuxino_lime*: bump Linux and U-Boot versions

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/olimex_imx233_olinuxino: bump Linux and U-Boot versions

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

iproute2: bump to version 4.14.1

Remove uClibc build fix; current uClibc version defines the required
macro.

Remove static link fix; fixed upstream.

Rebase the musl libc-compat.h workaround to adapt to upstream headers
location change.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

genimage: change upstream URL

Pengutronix is now hosting the official genimage repository and release
tarballs on Github. This patch updates the official URL from the package
description and its download website described in GENIMAGE_SITE.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/imx6-sabresd_qt5: Bump to kernel 4.14

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/imx6-sabresd: Bump to kernel 4.14

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 4.14

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump to 4.14 kernel version

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain: add 4.14.x choice for headers

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Merge tag '2017.11-rc2' into next

master has gained a number of autobuilder bugfixes since rc1, so merge these
to next to also fix them there.

Update for 2017.11-rc2

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xdriinfo: fix libgl dependency

Fixes
"mesa3d is in the dependency chain of xapp_xdriinfo that has added it
 to its _DEPENDENCIES variable without selecting it or depending on it
 from Config.in."
http://autobuild.buildroot.net/results/d8a/d8aeed2f64e21a277eb0bc5dc08d2339a14c682e/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imx-usb-loader: bump to latest commit

Latest commit is from Oct 5, 2017. This adds support for the i.MX7
family.

Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libpjsip: fix static build failures due to name clash

Several packages have a similar md5.c file, and each has a function
named byteReverse(). This generates link errors when building
statically ("multiple definition of `byteReverse'").

Fix by applying a patch from upstream:
  https://trac.pjsip.org/repos/changeset/5688

Fixes:
  http://autobuild.buildroot.org/results/5d7/5d72e0f8517a555399978d5a0e9f7efd0a278189/
  http://autobuild.buildroot.org/results/c47/c47ccbb9b40011cf0d79c7040bed061ddefd9629/
  http://autobuild.buildroot.org/results/419/419ab2c0e034cc68991281c51caa8271b0fadbab/

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libplist: needs threads

Upstream added a mandatory pthread check:
https://github.com/libimobiledevice/libplist/commit/eec2e855b4f192cb1808d1f02b6bc8935a979025

Fixes
http://autobuild.buildroot.net/results/863/863bb43db222f8e63d60b1fc4a53299575727de1/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/freerdp: fix build of wayland client

Currently, FreeRDP uses pkg-config to find whether wayland is available.
When it is, it gets the CFLAGS and LDFLAGS and so on from pkg-config,
which is OK.

But I also gets the path to the wayland scanner from pkg-config. And
this points to the target one, when we really need the host one.

So we force-feed the correct path as a configure option.

Furthermore, wayland support needs libxkbcommon, so add this missing
dependency as well.

Fixes:
    http://autobuild.buildroot.org/results/bdfe233ade36a56d0f65ef3c3d1698fca548beed/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/freerdp: fix gstreamer-1.x detection

Backport a patch from upstream.

Partially fixes:
    http://autobuild.buildroot.org/results/81aa66ddd88919295ccb5f34b527b737627263a7/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/freerdp: optional systemd's journald support

FreeRDP now has support for writing to the journal, so we must ensure
proper dependency and correct options.

Partially fixes:
    http://autobuild.buildroot.org/results/81aa66ddd88919295ccb5f34b527b737627263a7/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/freerdp: drop dependency on host-pkgconf

Currently, we only depend on host-pkgconf for gstreamer-0.x

However, we also need it at least for gstreamer-1.x and waylabnd, too.

But since FreeRDP is a cmake package, host-pkgconf is always pulled in
as a dependency by the cmake-package infrastructure.

So, drop the gstreamer-conditional host-pkgconf dependency.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ffmpeg: fix typo "nios" -> "nios2"

Typo added recently by
https://git.buildroot.net/buildroot/commit/package/ffmpeg?id=bd2544d3d3903935fc4dc0ec9c930720441e545f

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-numpy: also disable ARC HS with glibc

Building python-numpy on ARC HS with glibc fails due to missing FE_*
definitions in <fenv.h>. Therefore, python-numpy is only available on
ARC HS with a C library other than glibc.

Fixes:

  http://autobuild.buildroot.net/results/6b9a3310bb4f8c1fd7db0ef4476458b3eec2bf2e/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-numpy: remove trailing whitespace

Remove trailing whitespace introduced by commit
855002f22b4795b7ff3e37880c3ed65011cd036c ("python-numpy: reformat
BR2_PACKAGE_PYTHON_NUMPY_ARCH_SUPPORTS")

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ruby: security bump to version 2.4.2

Fixed the following security issues:

CVE-2017-0898: Buffer underrun vulnerability in Kernel.sprintf
CVE-2017-10784: Escape sequence injection vulnerability in the Basic
authentication of WEBrick
CVE-2017-14033: Buffer underrun vulnerability in OpenSSL ASN1 decode
CVE-2017-14064: Heap exposure in generating JSON

For more details, see the release notes:
https://www.ruby-lang.org/en/news/2017/09/14/ruby-2-4-2-released/

Drop now upstreamed rubygems patches and add hashes for the license files
while we're at it.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/imagemagick: security bump to version 7.0.7-10

Version 7.0.7-3 fixes CVE-2017-15218:
Stop potential leaks in the JNG decoder

Changelog: https://www.imagemagick.org/script/changelog.php

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wpa_supplicant: mesh support needs openssl

When BR2_PACKAGE_WPA_SUPPLICANT_MESH_NETWORKING is enabeld,
wpa_supplicant currently fails to build with:

../src/common/sae.o: In function `sae_cn_confirm.isra.2':
sae.c:(.text+0x168): undefined reference to `crypto_bignum_to_bin'
sae.c:(.text+0x198): undefined reference to `crypto_bignum_to_bin'
../src/common/sae.o: In function `sae_cn_confirm_ffc':
sae.c:(.text+0x214): undefined reference to `crypto_bignum_to_bin'
sae.c:(.text+0x22c): undefined reference to `crypto_bignum_to_bin'
../src/common/sae.o: In function `sae_cn_confirm_ecc':
sae.c:(.text+0x2a4): undefined reference to `crypto_ec_point_to_bin'
sae.c:(.text+0x2c0): undefined reference to `crypto_ec_point_to_bin'

[...]

This is due to the fact that the SAE code, used for the mesh network
support, needs OpenSSL support. Therefore, we ensure that
BR2_PACKAGE_WPA_SUPPLICANT_MESH_NETWORKING selects OpenSSL. Only
OpenSSL is supported, which is why
BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL is selected as well.

No changes to the .mk files are needed, because we were already
handling OpenSSL as an optional dependency.

This problem was not yet caught by the autobuilders.

Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tslib: update to 1.14

As usual, https://github.com/kergoth/tslib/releases has the changelog
summary.

This release includes a new plugin "lowpass" that is being built by
default; so we add that to the list of statically compiled in plugins
for static builds.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-imx: bump version to 0.13.0

Changelog:

==== version 0.13.0 (2017-11-01) ====

* New imxv4l2videosink element
  Currently only supports input physically contiguous memory blocks
  as input (so, for example, no videotestsrc)

* New Pango-based overlay elements using G2D for rendering

* gstimxcommon library is now public
  Necessary when implementing external sinks to retrieve the mapped
  physical memory address from gstreamer buffers
  (NOTE: ABI may change in the next few releases until this is stabilized)

* New optional ability to use GstPhysMemory from gst-plugins-bad

* imxv4l2videosrc:
  * Fix compile prior to Gstreamer 1.3.1
  * v4l2_buffer_pool: Add special case for tw6869 driver
    The tw6869 driver requires a different physical address to allow
    DMA'able buffers for decreasing latency between chip and display
  * v4l2src: add fractional "fps" property
    (obsoletes the "fps-n" property)
  * Add GstImxV4l2Meta init function
    This avoids the g_assert() that was caused by the missing init
    function
  * Add num-additional-buffers property
    This can be useful if capturing video isn't smooth; it sets the
    number of internal additional buffers, so if downstream consumes
    too many buffers, imxv4l2videosrc might end up doing a blocking
    wait until buffers are returned

* imxv4l2src plugin is now called imxv4l2video, because it also
  contains imxv4l2videosink
  Also, the v4l2 elements can be enabled/disabled in the build
  configuration individually now

* compositor:
  * Only copy compositor input buffers to DMA memory once
    If a single input frame is used for multiple output frames, we would
    otherwise copy multiple times which can easily go to the limit of the
    memory bandwidth

* vpu:
  * Handle releasing of buffers without assigned framebuffer
    This can happen if the buffer is released before it was actually
    used, e.g. when renegotiating at the very beginning; prevents
    a crash that would otherwise occur
  * Add parameter check to avoid encoder crash on flush

* g2d:
  * Add build configuration switches to explicitely specify G2D include
    and library paths
  * Disable cacheable memory allocation
    Several issues were reported with cacheable DMA memory, so it is
    turned off, at least for now

* blitter:
  * Add property to clear screen to black in blitter sinks
  * Add output-rotation property to videotransform base class

* audio:
  * Fix reference counting for caps
  * Mark static codec caps as may be leaked
    This gets rid of the false positive in the leak tracer

Signed-off-by: Alexandre Esse <alexandre.esse.dev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mesa3d: fix build with BR2_SHARED_STATIC_LIBS

mesa3d does not allow to enable both static and shared libraries so if
BR2_SHARED_STATIC_LIBS is set, disable static

Fixes https://bugs.busybox.net/show_bug.cgi?id=10326

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

vboot-utils: fix ARCH detection

The package includes some target-specific code that is irrelevant
in a host package but gets built anyway. The target for this code
must be one of the supported ChromeOS targets.

Supplied Makefile apparently relies on the environment to provide
a valid target, with a simple fallback to host arch. This breaks
the build if no value is provided and the host arch is not among
the supported ones.

Should fix
http://autobuild.buildroot.net/results/d118a83b6c4f7f910d0d44c279f36251d7ba29e8/
and similar failures.

Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/config-fragments/autobuild: update toolchains for 2017.11-rc1

All Buildroot pre-built toolchains have been rebuilt with Buildroot
2017.11-rc1, so that they have the latest version of
glibc/musl/uClibc, and also the latest gcc/binutils updates.

Specifically, this will fix the build failures on Blackfin that were
due to the missing accept4() support:

  http://autobuild.buildroot.net/results/8b5a72dd7cde685f6f68f46aeee8b1b60c96d559/
  (openobex)

  http://autobuild.buildroot.net/results/b19dd9ed29944d7f79c6f824669e3baaa0bb045a/
  (libiio)

In terms of changes to the toolchains:

 - AArch64 glibc toolchain changed to use 4.4 kernel headers instead
   of 4.1, in order to increase the variety of kernel header versions
   being tested.

 - Most configurations now use 4.13 kernel headers instead of 4.12
   (except the configurations that were explicitly using an older
   kernel headers version)

 - The mips64 n64 configuration is changed from using gcc 4.9 to gcc
   5, since another ARM configuration already tests gcc 4.9.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi: remove dependency on locale-enabled toolchain

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xapp_bdftopcf: bump version to 1.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>